Merge tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds

Pull LED updates from Pavel Machek:
 "Most significant here is the driver for Qualcomm LPG. Apparently it
  drives backlight on some boards, so it is quite important for some
  people"

* tag 'leds-5.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
  leds: qcom-lpg: Require pattern to follow documentation
  leds: lp50xx: Remove duplicated error reporting in .remove()
  leds: qcom-lpg: add missing PWM dependency
  leds: ktd2692: Make aux-gpios optional
  dt-bindings: leds: convert ktd2692 bindings to yaml
  leds: ktd2692: Avoid duplicate error messages on probe deferral
  leds: is31fl32xx: Improve error reporting in .remove()
  leds: Move pwm-multicolor driver into rgb directory
  leds: Add PWM multicolor driver
  dt-bindings: leds: Add multicolor PWM LED bindings
  dt-bindings: leds: Optional multi-led unit address
  leds: regulator: Make probeable from device tree
  leds: regulator: Add dev helper variable
  dt-bindings: leds: Add regulator-led binding
  leds: pca9532: Make pca9532_destroy_devices() return void
  leds: Add pm8350c support to Qualcomm LPG driver
  dt-bindings: leds: Add pm8350c pmic support
  leds: Add driver for Qualcomm LPG
  dt-bindings: leds: Add Qualcomm Light Pulse Generator binding

18 files changed, 2193 insertions, 93 deletions

diff --git a/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
new file mode 100644
index 000000000000..bac95a51afa1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/kinetic,ktd2692.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/kinetic,ktd2692.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: KTD2692 Flash LED Driver from Kinetic Technologies
+
+maintainers:
+  - Markuss Broks <markuss.broks@gmail.com>
+
+description: |
+  KTD2692 is the ideal power solution for high-power flash LEDs.
+  It uses ExpressWire single-wire programming for maximum flexibility.
+
+  The ExpressWire interface through CTRL pin can control LED on/off and
+  enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+  Flash timeout, LVP(low voltage protection).
+
+  Also, When the AUX pin is pulled high while CTRL pin is high,
+  LED current will be ramped up to the flash-mode current level.
+
+properties:
+  compatible:
+    const: kinetic,ktd2692
+
+  ctrl-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  aux-gpios:
+    maxItems: 1
+    description: Specifier of the GPIO connected to CTRL pin.
+
+  vin-supply:
+    description: LED supply (2.7V to 5.5V).
+
+  led:
+    type: object
+    $ref: common.yaml#
+    description: Properties for the LED.
+    properties:
+      function: true
+      color: true
+      flash-max-timeout-us:
+        description: Flash LED maximum timeout.
+
+      led-max-microamp:
+        maximum: 300000
+        description: Minimum Threshold for Timer protection
+          is defined internally (Maximum 300mA).
+
+      flash-max-microamp:
+        maximum: 300000
+        description: Flash LED maximum current
+          Formula - I(uA) = 15000000 / Rset.
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - ctrl-gpios
+  - led
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/leds/common.h>
+
+    ktd2692 {
+      compatible = "kinetic,ktd2692";
+      ctrl-gpios = <&gpc0 1 0>;
+      aux-gpios = <&gpc0 2 0>;
+      vin-supply = <&vbat>;
+
+      led {
+        function = LED_FUNCTION_FLASH;
+        color = <LED_COLOR_ID_WHITE>;
+        flash-max-timeout-us = <250000>;
+        flash-max-microamp = <150000>;
+        led-max-microamp = <25000>;
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
index 37445c68cdef..f41d021ed677 100644
--- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -20,7 +20,7 @@ description: |
   within this documentation directory.
 
 patternProperties:
-  "^multi-led@([0-9a-f])$":
+  "^multi-led(@[0-9a-f])?$":
     type: object
     description: Represents the LEDs that are to be grouped.
     properties:
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
deleted file mode 100644
index 853737452580..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Kinetic Technologies - KTD2692 Flash LED Driver
-
-KTD2692 is the ideal power solution for high-power flash LEDs.
-It uses ExpressWire single-wire programming for maximum flexibility.
-
-The ExpressWire interface through CTRL pin can control LED on/off and
-enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
-Flash timeout, LVP(low voltage protection).
-
-Also, When the AUX pin is pulled high while CTRL pin is high,
-LED current will be ramped up to the flash-mode current level.
-
-Required properties:
-- compatible : Should be "kinetic,ktd2692".
-- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
-- aux-gpios : Specifier of the GPIO connected to AUX pin.
-
-Optional properties:
-- vin-supply : "vin" LED supply (2.7V to 5.5V).
-  See Documentation/devicetree/bindings/regulator/regulator.txt
-
-A discrete LED element connected to the device must be represented by a child
-node - See Documentation/devicetree/bindings/leds/common.txt
-
-Required properties for flash LED child nodes:
-  See Documentation/devicetree/bindings/leds/common.txt
-- led-max-microamp : Minimum Threshold for Timer protection
-  is defined internally (Maximum 300mA).
-- flash-max-microamp : Flash LED maximum current
-  Formula : I(mA) = 15000 / Rset.
-- flash-max-timeout-us : Flash LED maximum timeout.
-
-Optional properties for flash LED child nodes:
-- label : See Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-ktd2692 {
-	compatible = "kinetic,ktd2692";
-	ctrl-gpios = <&gpc0 1 0>;
-	aux-gpios = <&gpc0 2 0>;
-	vin-supply = <&vbat>;
-
-	flash-led {
-		label = "ktd2692-flash";
-		led-max-microamp = <300000>;
-		flash-max-microamp = <1500000>;
-		flash-max-timeout-us = <1835000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
new file mode 100644
index 000000000000..6625a528f727
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm-multicolor.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Multi-color LEDs connected to PWM
+
+maintainers:
+  - Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+
+description: |
+  This driver combines several monochrome PWM LEDs into one multi-color
+  LED using the multicolor LED class.
+
+properties:
+  compatible:
+    const: pwm-leds-multicolor
+
+  multi-led:
+    type: object
+
+    patternProperties:
+      "^led-[0-9a-z]+$":
+        type: object
+        $ref: common.yaml#
+
+        additionalProperties: false
+
+        properties:
+          pwms:
+            maxItems: 1
+
+          pwm-names: true
+
+          color: true
+
+        required:
+          - pwms
+          - color
+
+required:
+  - compatible
+
+allOf:
+  - $ref: leds-class-multicolor.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+        compatible = "pwm-leds-multicolor";
+
+        multi-led {
+          color = <LED_COLOR_ID_RGB>;
+          function = LED_FUNCTION_INDICATOR;
+          max-brightness = <65535>;
+
+          led-red {
+              pwms = <&pwm1 0 1000000>;
+              color = <LED_COLOR_ID_RED>;
+          };
+
+          led-green {
+              pwms = <&pwm2 0 1000000>;
+              color = <LED_COLOR_ID_GREEN>;
+          };
+
+          led-blue {
+              pwms = <&pwm3 0 1000000>;
+              color = <LED_COLOR_ID_BLUE>;
+          };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
new file mode 100644
index 000000000000..409a4c7298e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-qcom-lpg.yaml
@@ -0,0 +1,174 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-qcom-lpg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Light Pulse Generator
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: >
+  The Qualcomm Light Pulse Generator consists of three different hardware blocks;
+  a ramp generator with lookup table, the light pulse generator and a three
+  channel current sink. These blocks are found in a wide range of Qualcomm PMICs.
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8150b-lpg
+      - qcom,pm8150l-lpg
+      - qcom,pm8350c-pwm
+      - qcom,pm8916-pwm
+      - qcom,pm8941-lpg
+      - qcom,pm8994-lpg
+      - qcom,pmc8180c-lpg
+      - qcom,pmi8994-lpg
+      - qcom,pmi8998-lpg
+
+  "#pwm-cells":
+    const: 2
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  qcom,power-source:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      power-source used to drive the output, as defined in the datasheet.
+      Should be specified if the TRILED block is present
+    enum: [0, 1, 3]
+
+  qcom,dtest:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: >
+      A list of integer pairs, where each pair represent the dtest line the
+      particular channel should be connected to and the flags denoting how the
+      value should be outputed, as defined in the datasheet. The number of
+      pairs should be the same as the number of channels.
+    items:
+      items:
+        - description: dtest line to attach
+        - description: flags for the attachment
+
+  multi-led:
+    type: object
+    $ref: leds-class-multicolor.yaml#
+    properties:
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^led@[0-9a-f]$":
+        type: object
+        $ref: common.yaml#
+
+patternProperties:
+  "^led@[0-9a-f]$":
+    type: object
+    $ref: common.yaml#
+
+    properties:
+      reg: true
+
+    required:
+      - reg
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      qcom,dtest = <0 0>,
+                   <0 0>,
+                   <0 0>,
+                   <4 1>;
+
+      led@1 {
+        reg = <1>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <1>;
+      };
+
+      led@2 {
+        reg = <2>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <0>;
+        default-state = "on";
+      };
+
+      led@3 {
+        reg = <3>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <2>;
+      };
+
+      led@4 {
+        reg = <4>;
+        color = <LED_COLOR_ID_GREEN>;
+        function = LED_FUNCTION_INDICATOR;
+        function-enumerator = <3>;
+      };
+    };
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-controller {
+      compatible = "qcom,pmi8994-lpg";
+
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      qcom,power-source = <1>;
+
+      multi-led {
+        color = <LED_COLOR_ID_RGB>;
+        function = LED_FUNCTION_STATUS;
+
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        led@1 {
+          reg = <1>;
+          color = <LED_COLOR_ID_RED>;
+        };
+
+        led@2 {
+          reg = <2>;
+          color = <LED_COLOR_ID_GREEN>;
+        };
+
+        led@3 {
+          reg = <3>;
+          color = <LED_COLOR_ID_BLUE>;
+        };
+      };
+    };
+  - |
+    pwm-controller {
+      compatible = "qcom,pm8916-pwm";
+      #pwm-cells = <2>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/leds/regulator-led.yaml b/Documentation/devicetree/bindings/leds/regulator-led.yaml
new file mode 100644
index 000000000000..3e020d700c00
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/regulator-led.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/regulator-led.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Device Tree Bindings for Regulator LEDs
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  Regulator LEDs are powered by a single regulator such that they can
+  be turned on or off by enabling or disabling the regulator. The available
+  brightness settings will be inferred from the available voltages on the
+  regulator, and any constraints on the voltage or current will need to be
+  specified on the regulator.
+
+allOf:
+  - $ref: common.yaml#
+
+properties:
+  $nodename:
+    pattern: '^led.*$'
+
+  compatible:
+    const: regulator-led
+
+  vled-supply:
+    description:
+      The regulator controlling the current to the LED.
+
+  function: true
+  color: true
+  linux,default-trigger: true
+  default-state: true
+
+required:
+  - compatible
+  - vled-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/leds/common.h>
+
+    led-heartbeat {
+        compatible = "regulator-led";
+        vled-supply = <&regulator>;
+        function = LED_FUNCTION_STATUS;
+        color = <LED_COLOR_ID_BLUE>;
+        linux,default-trigger = "heartbeat";
+    };
+...
diff --git a/Documentation/leds/leds-qcom-lpg.rst b/Documentation/leds/leds-qcom-lpg.rst
new file mode 100644
index 000000000000..de7ceead9337
--- /dev/null
+++ b/Documentation/leds/leds-qcom-lpg.rst
@@ -0,0 +1,78 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==============================
+Kernel driver for Qualcomm LPG
+==============================
+
+Description
+-----------
+
+The Qualcomm LPG can be found in a variety of Qualcomm PMICs and consists of a
+number of PWM channels, a programmable pattern lookup table and a RGB LED
+current sink.
+
+To facilitate the various use cases, the LPG channels can be exposed as
+individual LEDs, grouped together as RGB LEDs or otherwise be accessed as PWM
+channels. The output of each PWM channel is routed to other hardware
+blocks, such as the RGB current sink, GPIO pins etc.
+
+The each PWM channel can operate with a period between 27us and 384 seconds and
+has a 9 bit resolution of the duty cycle.
+
+In order to provide support for status notifications with the CPU subsystem in
+deeper idle states the LPG provides pattern support. This consists of a shared
+lookup table of brightness values and per channel properties to select the
+range within the table to use, the rate and if the pattern should repeat.
+
+The pattern for a channel can be programmed using the "pattern" trigger, using
+the hw_pattern attribute.
+
+/sys/class/leds/<led>/hw_pattern
+--------------------------------
+
+Specify a hardware pattern for a Qualcomm LPG LED.
+
+The pattern is a series of brightness and hold-time pairs, with the hold-time
+expressed in milliseconds. The hold time is a property of the pattern and must
+therefor be identical for each element in the pattern (except for the pauses
+described below). As the LPG hardware is not able to perform the linear
+transitions expected by the leds-trigger-pattern format, each entry in the
+pattern must be followed a zero-length entry of the same brightness.
+
+Simple pattern::
+
+    "255 500 255 0 0 500 0 0"
+
+        ^
+        |
+    255 +----+    +----+
+        |    |    |    |      ...
+      0 |    +----+    +----
+        +---------------------->
+        0    5   10   15     time (100ms)
+
+The LPG supports specifying a longer hold-time for the first and last element
+in the pattern, the so called "low pause" and "high pause".
+
+Low-pause pattern::
+
+    "255 1000 255 0 0 500 0 0 255 500 255 0 0 500 0 0"
+
+        ^
+        |
+    255 +--------+    +----+    +----+    +--------+
+        |        |    |    |    |    |    |        |      ...
+      0 |        +----+    +----+    +----+        +----
+        +----------------------------->
+        0    5   10   15  20   25   time (100ms)
+
+Similarily, the last entry can be stretched by using a higher hold-time on the
+last entry.
+
+In order to save space in the shared lookup table the LPG supports "ping-pong"
+mode, in which case each run through the pattern is performed by first running
+the pattern forward, then backwards. This mode is automatically used by the
+driver when the given pattern is a palindrome. In this case the "high pause"
+denotes the wait time before the pattern is run in reverse and as such the
+specified hold-time of the middle item in the pattern is allowed to have a
+different hold-time.
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index 6090e647daee..a49979f41eee 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -869,6 +869,9 @@ source "drivers/leds/blink/Kconfig"
 comment "Flash and Torch LED drivers"
 source "drivers/leds/flash/Kconfig"
 
+comment "RGB LED drivers"
+source "drivers/leds/rgb/Kconfig"
+
 comment "LED Triggers"
 source "drivers/leds/trigger/Kconfig"
 
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index e58ecb36360f..4fd2f92cd198 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -99,6 +99,9 @@ obj-$(CONFIG_LEDS_USER)			+= uleds.o
 # Flash and Torch LED Drivers
 obj-$(CONFIG_LEDS_CLASS_FLASH)		+= flash/
 
+# RGB LED Drivers
+obj-$(CONFIG_LEDS_CLASS_MULTICOLOR)	+= rgb/
+
 # LED Triggers
 obj-$(CONFIG_LEDS_TRIGGERS)		+= trigger/
 
diff --git a/drivers/leds/flash/leds-ktd2692.c b/drivers/leds/flash/leds-ktd2692.c
index ed1f20a58bf6..670f3bf2e906 100644
--- a/drivers/leds/flash/leds-ktd2692.c
+++ b/drivers/leds/flash/leds-ktd2692.c
@@ -279,17 +279,12 @@ static int ktd2692_parse_dt(struct ktd2692_context *led, struct device *dev,
 
 	led->ctrl_gpio = devm_gpiod_get(dev, "ctrl", GPIOD_ASIS);
 	ret = PTR_ERR_OR_ZERO(led->ctrl_gpio);
-	if (ret) {
-		dev_err(dev, "cannot get ctrl-gpios %d\n", ret);
-		return ret;
-	}
+	if (ret)
+		return dev_err_probe(dev, ret, "cannot get ctrl-gpios\n");
 
-	led->aux_gpio = devm_gpiod_get(dev, "aux", GPIOD_ASIS);
-	ret = PTR_ERR_OR_ZERO(led->aux_gpio);
-	if (ret) {
-		dev_err(dev, "cannot get aux-gpios %d\n", ret);
-		return ret;
-	}
+	led->aux_gpio = devm_gpiod_get_optional(dev, "aux", GPIOD_ASIS);
+	if (IS_ERR(led->aux_gpio))
+		return dev_err_probe(dev, PTR_ERR(led->aux_gpio), "cannot get aux-gpios\n");
 
 	led->regulator = devm_regulator_get(dev, "vin");
 	if (IS_ERR(led->regulator))
diff --git a/drivers/leds/leds-is31fl32xx.c b/drivers/leds/leds-is31fl32xx.c
index 22c092a4394a..fc63fce38c19 100644
--- a/drivers/leds/leds-is31fl32xx.c
+++ b/drivers/leds/leds-is31fl32xx.c
@@ -460,8 +460,14 @@ static int is31fl32xx_probe(struct i2c_client *client,
 static int is31fl32xx_remove(struct i2c_client *client)
 {
 	struct is31fl32xx_priv *priv = i2c_get_clientdata(client);
+	int ret;
 
-	return is31fl32xx_reset_regs(priv);
+	ret = is31fl32xx_reset_regs(priv);
+	if (ret)
+		dev_err(&client->dev, "Failed to reset registers on removal (%pe)\n",
+			ERR_PTR(ret));
+
+	return 0;
 }
 
 /*
diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c
index 50b195ff96ca..e129dcc656b8 100644
--- a/drivers/leds/leds-lp50xx.c
+++ b/drivers/leds/leds-lp50xx.c
@@ -569,10 +569,8 @@ static int lp50xx_remove(struct i2c_client *client)
 	int ret;
 
 	ret = lp50xx_enable_disable(led, 0);
-	if (ret) {
+	if (ret)
 		dev_err(led->dev, "Failed to disable chip\n");
-		return ret;
-	}
 
 	if (led->regulator) {
 		ret = regulator_disable(led->regulator);
diff --git a/drivers/leds/leds-pca9532.c b/drivers/leds/leds-pca9532.c
index 017794bb87ae..f72b5d1be3a6 100644
--- a/drivers/leds/leds-pca9532.c
+++ b/drivers/leds/leds-pca9532.c
@@ -318,13 +318,10 @@ static int pca9532_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
 }
 #endif /* CONFIG_LEDS_PCA9532_GPIO */
 
-static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
+static void pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
 {
 	int i = n_devs;
 
-	if (!data)
-		return -EINVAL;
-
 	while (--i >= 0) {
 		switch (data->leds[i].type) {
 		case PCA9532_TYPE_NONE:
@@ -346,8 +343,6 @@ static int pca9532_destroy_devices(struct pca9532_data *data, int n_devs)
 	if (data->gpio.parent)
 		gpiochip_remove(&data->gpio);
 #endif
-
-	return 0;
 }
 
 static int pca9532_configure(struct i2c_client *client,
@@ -555,7 +550,9 @@ static int pca9532_remove(struct i2c_client *client)
 {
 	struct pca9532_data *data = i2c_get_clientdata(client);
 
-	return pca9532_destroy_devices(data, data->chip_info->num_leds);
+	pca9532_destroy_devices(data, data->chip_info->num_leds);
+
+	return 0;
 }
 
 module_i2c_driver(pca9532_driver);
diff --git a/drivers/leds/leds-regulator.c b/drivers/leds/leds-regulator.c
index 208c98918433..8a8b73b4e358 100644
--- a/drivers/leds/leds-regulator.c
+++ b/drivers/leds/leds-regulator.c
@@ -8,6 +8,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/mod_devicetable.h>
 #include <linux/err.h>
 #include <linux/slab.h>
 #include <linux/leds.h>
@@ -123,34 +124,37 @@ static int regulator_led_probe(struct platform_device *pdev)
 {
 	struct led_regulator_platform_data *pdata =
 			dev_get_platdata(&pdev->dev);
+	struct device *dev = &pdev->dev;
+	struct led_init_data init_data = {};
 	struct regulator_led *led;
 	struct regulator *vcc;
 	int ret = 0;
 
-	if (pdata == NULL) {
-		dev_err(&pdev->dev, "no platform data\n");
-		return -ENODEV;
-	}
-
-	vcc = devm_regulator_get_exclusive(&pdev->dev, "vled");
+	vcc = devm_regulator_get_exclusive(dev, "vled");
 	if (IS_ERR(vcc)) {
-		dev_err(&pdev->dev, "Cannot get vcc for %s\n", pdata->name);
+		dev_err(dev, "Cannot get vcc\n");
 		return PTR_ERR(vcc);
 	}
 
-	led = devm_kzalloc(&pdev->dev, sizeof(*led), GFP_KERNEL);
+	led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
 	if (led == NULL)
 		return -ENOMEM;
 
+	init_data.fwnode = dev->fwnode;
+
 	led->cdev.max_brightness = led_regulator_get_max_brightness(vcc);
-	if (pdata->brightness > led->cdev.max_brightness) {
-		dev_err(&pdev->dev, "Invalid default brightness %d\n",
+	/* Legacy platform data label assignment */
+	if (pdata) {
+		if (pdata->brightness > led->cdev.max_brightness) {
+			dev_err(dev, "Invalid default brightness %d\n",
 				pdata->brightness);
-		return -EINVAL;
+			return -EINVAL;
+		}
+		led->cdev.brightness = pdata->brightness;
+		init_data.default_label = pdata->name;
 	}
 
 	led->cdev.brightness_set_blocking = regulator_led_brightness_set;
-	led->cdev.name = pdata->name;
 	led->cdev.flags |= LED_CORE_SUSPENDRESUME;
 	led->vcc = vcc;
 
@@ -162,16 +166,10 @@ static int regulator_led_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, led);
 
-	ret = led_classdev_register(&pdev->dev, &led->cdev);
+	ret = led_classdev_register_ext(dev, &led->cdev, &init_data);
 	if (ret < 0)
 		return ret;
 
-	/* to expose the default value to userspace */
-	led->cdev.brightness = pdata->brightness;
-
-	/* Set the default led status */
-	regulator_led_brightness_set(&led->cdev, led->cdev.brightness);
-
 	return 0;
 }
 
@@ -184,10 +182,17 @@ static int regulator_led_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id regulator_led_of_match[] = {
+	{ .compatible = "regulator-led", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, regulator_led_of_match);
+
 static struct platform_driver regulator_led_driver = {
 	.driver = {
-		   .name  = "leds-regulator",
-		   },
+		.name  = "leds-regulator",
+		.of_match_table = regulator_led_of_match,
+	},
 	.probe  = regulator_led_probe,
 	.remove = regulator_led_remove,
 };
diff --git a/drivers/leds/rgb/Kconfig b/drivers/leds/rgb/Kconfig
new file mode 100644
index 000000000000..204cf470beae
--- /dev/null
+++ b/drivers/leds/rgb/Kconfig
@@ -0,0 +1,29 @@
+# SPDX-License-Identifier: GPL-2.0
+
+if LEDS_CLASS_MULTICOLOR
+
+config LEDS_PWM_MULTICOLOR
+	tristate "PWM driven multi-color LED Support"
+	depends on PWM
+	help
+	  This option enables support for PWM driven monochrome LEDs that are
+	  grouped into multicolor LEDs.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called leds-pwm-multicolor.
+
+config LEDS_QCOM_LPG
+	tristate "LED support for Qualcomm LPG"
+	depends on OF
+	depends on PWM
+	depends on SPMI
+	help
+	  This option enables support for the Light Pulse Generator found in a
+	  wide variety of Qualcomm PMICs. The LPG consists of a number of PWM
+	  channels and typically a shared pattern lookup table and a current
+	  sink, intended to drive RGB LEDs. Each channel can either be used as
+	  a LED, grouped to represent a RGB LED or exposed as PWM channels.
+
+	  If compiled as a module, the module will be named leds-qcom-lpg.
+
+endif # LEDS_CLASS_MULTICOLOR
diff --git a/drivers/leds/rgb/Makefile b/drivers/leds/rgb/Makefile
new file mode 100644
index 000000000000..0675bc0f6e18
--- /dev/null
+++ b/drivers/leds/rgb/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_LEDS_PWM_MULTICOLOR)	+= leds-pwm-multicolor.o
+obj-$(CONFIG_LEDS_QCOM_LPG)		+= leds-qcom-lpg.o
diff --git a/drivers/leds/rgb/leds-pwm-multicolor.c b/drivers/leds/rgb/leds-pwm-multicolor.c
new file mode 100644
index 000000000000..45e38708ecb1
--- /dev/null
+++ b/drivers/leds/rgb/leds-pwm-multicolor.c
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PWM-based multi-color LED control
+ *
+ * Copyright 2022 Sven Schwermer <sven.schwermer@disruptive-technologies.com>
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/leds.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/pwm.h>
+
+struct pwm_led {
+	struct pwm_device *pwm;
+	struct pwm_state state;
+};
+
+struct pwm_mc_led {
+	struct led_classdev_mc mc_cdev;
+	struct mutex lock;
+	struct pwm_led leds[];
+};
+
+static int led_pwm_mc_set(struct led_classdev *cdev,
+			  enum led_brightness brightness)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(cdev);
+	struct pwm_mc_led *priv = container_of(mc_cdev, struct pwm_mc_led, mc_cdev);
+	unsigned long long duty;
+	int ret = 0;
+	int i;
+
+	led_mc_calc_color_components(mc_cdev, brightness);
+
+	mutex_lock(&priv->lock);
+
+	for (i = 0; i < mc_cdev->num_colors; i++) {
+		duty = priv->leds[i].state.period;
+		duty *= mc_cdev->subled_info[i].brightness;
+		do_div(duty, cdev->max_brightness);
+
+		priv->leds[i].state.duty_cycle = duty;
+		priv->leds[i].state.enabled = duty > 0;
+		ret = pwm_apply_state(priv->leds[i].pwm,
+				      &priv->leds[i].state);
+		if (ret)
+			break;
+	}
+
+	mutex_unlock(&priv->lock);
+
+	return ret;
+}
+
+static int iterate_subleds(struct device *dev, struct pwm_mc_led *priv,
+			   struct fwnode_handle *mcnode)
+{
+	struct mc_subled *subled = priv->mc_cdev.subled_info;
+	struct fwnode_handle *fwnode;
+	struct pwm_led *pwmled;
+	u32 color;
+	int ret;
+
+	/* iterate over the nodes inside the multi-led node */
+	fwnode_for_each_child_node(mcnode, fwnode) {
+		pwmled = &priv->leds[priv->mc_cdev.num_colors];
+		pwmled->pwm = devm_fwnode_pwm_get(dev, fwnode, NULL);
+		if (IS_ERR(pwmled->pwm)) {
+			ret = PTR_ERR(pwmled->pwm);
+			dev_err(dev, "unable to request PWM: %d\n", ret);
+			goto release_fwnode;
+		}
+		pwm_init_state(pwmled->pwm, &pwmled->state);
+
+		ret = fwnode_property_read_u32(fwnode, "color", &color);
+		if (ret) {
+			dev_err(dev, "cannot read color: %d\n", ret);
+			goto release_fwnode;
+		}
+
+		subled[priv->mc_cdev.num_colors].color_index = color;
+		priv->mc_cdev.num_colors++;
+	}
+
+	return 0;
+
+release_fwnode:
+	fwnode_handle_put(fwnode);
+	return ret;
+}
+
+static int led_pwm_mc_probe(struct platform_device *pdev)
+{
+	struct fwnode_handle *mcnode, *fwnode;
+	struct led_init_data init_data = {};
+	struct led_classdev *cdev;
+	struct mc_subled *subled;
+	struct pwm_mc_led *priv;
+	int count = 0;
+	int ret = 0;
+
+	mcnode = device_get_named_child_node(&pdev->dev, "multi-led");
+	if (!mcnode)
+		return dev_err_probe(&pdev->dev, -ENODEV,
+				     "expected multi-led node\n");
+
+	/* count the nodes inside the multi-led node */
+	fwnode_for_each_child_node(mcnode, fwnode)
+		count++;
+
+	priv = devm_kzalloc(&pdev->dev, struct_size(priv, leds, count),
+			    GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto release_mcnode;
+	}
+	mutex_init(&priv->lock);
+
+	subled = devm_kcalloc(&pdev->dev, count, sizeof(*subled), GFP_KERNEL);
+	if (!subled) {
+		ret = -ENOMEM;
+		goto release_mcnode;
+	}
+	priv->mc_cdev.subled_info = subled;
+
+	/* init the multicolor's LED class device */
+	cdev = &priv->mc_cdev.led_cdev;
+	fwnode_property_read_u32(mcnode, "max-brightness",
+				 &cdev->max_brightness);
+	cdev->flags = LED_CORE_SUSPENDRESUME;
+	cdev->brightness_set_blocking = led_pwm_mc_set;
+
+	ret = iterate_subleds(&pdev->dev, priv, mcnode);
+	if (ret)
+		goto release_mcnode;
+
+	init_data.fwnode = mcnode;
+	ret = devm_led_classdev_multicolor_register_ext(&pdev->dev,
+							&priv->mc_cdev,
+							&init_data);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"failed to register multicolor PWM led for %s: %d\n",
+			cdev->name, ret);
+		goto release_mcnode;
+	}
+
+	ret = led_pwm_mc_set(cdev, cdev->brightness);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to set led PWM value for %s: %d",
+				     cdev->name, ret);
+
+	platform_set_drvdata(pdev, priv);
+	return 0;
+
+release_mcnode:
+	fwnode_handle_put(mcnode);
+	return ret;
+}
+
+static const struct of_device_id of_pwm_leds_mc_match[] = {
+	{ .compatible = "pwm-leds-multicolor", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, of_pwm_leds_mc_match);
+
+static struct platform_driver led_pwm_mc_driver = {
+	.probe		= led_pwm_mc_probe,
+	.driver		= {
+		.name	= "leds_pwm_multicolor",
+		.of_match_table = of_pwm_leds_mc_match,
+	},
+};
+module_platform_driver(led_pwm_mc_driver);
+
+MODULE_AUTHOR("Sven Schwermer <sven.schwermer@disruptive-technologies.com>");
+MODULE_DESCRIPTION("multi-color PWM LED driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:leds-pwm-multicolor");
diff --git a/drivers/leds/rgb/leds-qcom-lpg.c b/drivers/leds/rgb/leds-qcom-lpg.c
new file mode 100644
index 000000000000..02f51cc61837
--- /dev/null
+++ b/drivers/leds/rgb/leds-qcom-lpg.c
@@ -0,0 +1,1451 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2017-2022 Linaro Ltd
+ * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
+ */
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define LPG_SUBTYPE_REG		0x05
+#define  LPG_SUBTYPE_LPG	0x2
+#define  LPG_SUBTYPE_PWM	0xb
+#define  LPG_SUBTYPE_LPG_LITE	0x11
+#define LPG_PATTERN_CONFIG_REG	0x40
+#define LPG_SIZE_CLK_REG	0x41
+#define  PWM_CLK_SELECT_MASK	GENMASK(1, 0)
+#define LPG_PREDIV_CLK_REG	0x42
+#define  PWM_FREQ_PRE_DIV_MASK	GENMASK(6, 5)
+#define  PWM_FREQ_EXP_MASK	GENMASK(2, 0)
+#define PWM_TYPE_CONFIG_REG	0x43
+#define PWM_VALUE_REG		0x44
+#define PWM_ENABLE_CONTROL_REG	0x46
+#define PWM_SYNC_REG		0x47
+#define LPG_RAMP_DURATION_REG	0x50
+#define LPG_HI_PAUSE_REG	0x52
+#define LPG_LO_PAUSE_REG	0x54
+#define LPG_HI_IDX_REG		0x56
+#define LPG_LO_IDX_REG		0x57
+#define PWM_SEC_ACCESS_REG	0xd0
+#define PWM_DTEST_REG(x)	(0xe2 + (x) - 1)
+
+#define TRI_LED_SRC_SEL		0x45
+#define TRI_LED_EN_CTL		0x46
+#define TRI_LED_ATC_CTL		0x47
+
+#define LPG_LUT_REG(x)		(0x40 + (x) * 2)
+#define RAMP_CONTROL_REG	0xc8
+
+#define LPG_RESOLUTION		512
+#define LPG_MAX_M		7
+
+struct lpg_channel;
+struct lpg_data;
+
+/**
+ * struct lpg - LPG device context
+ * @dev:	pointer to LPG device
+ * @map:	regmap for register access
+ * @lock:	used to synchronize LED and pwm callback requests
+ * @pwm:	PWM-chip object, if operating in PWM mode
+ * @data:	reference to version specific data
+ * @lut_base:	base address of the LUT block (optional)
+ * @lut_size:	number of entries in the LUT block
+ * @lut_bitmap:	allocation bitmap for LUT entries
+ * @triled_base: base address of the TRILED block (optional)
+ * @triled_src:	power-source for the TRILED
+ * @triled_has_atc_ctl:	true if there is TRI_LED_ATC_CTL register
+ * @triled_has_src_sel:	true if there is TRI_LED_SRC_SEL register
+ * @channels:	list of PWM channels
+ * @num_channels: number of @channels
+ */
+struct lpg {
+	struct device *dev;
+	struct regmap *map;
+
+	struct mutex lock;
+
+	struct pwm_chip pwm;
+
+	const struct lpg_data *data;
+
+	u32 lut_base;
+	u32 lut_size;
+	unsigned long *lut_bitmap;
+
+	u32 triled_base;
+	u32 triled_src;
+	bool triled_has_atc_ctl;
+	bool triled_has_src_sel;
+
+	struct lpg_channel *channels;
+	unsigned int num_channels;
+};
+
+/**
+ * struct lpg_channel - per channel data
+ * @lpg:	reference to parent lpg
+ * @base:	base address of the PWM channel
+ * @triled_mask: mask in TRILED to enable this channel
+ * @lut_mask:	mask in LUT to start pattern generator for this channel
+ * @subtype:	PMIC hardware block subtype
+ * @in_use:	channel is exposed to LED framework
+ * @color:	color of the LED attached to this channel
+ * @dtest_line:	DTEST line for output, or 0 if disabled
+ * @dtest_value: DTEST line configuration
+ * @pwm_value:	duty (in microseconds) of the generated pulses, overridden by LUT
+ * @enabled:	output enabled?
+ * @period:	period (in nanoseconds) of the generated pulses
+ * @clk_sel:	reference clock frequency selector
+ * @pre_div_sel: divider selector of the reference clock
+ * @pre_div_exp: exponential divider of the reference clock
+ * @ramp_enabled: duty cycle is driven by iterating over lookup table
+ * @ramp_ping_pong: reverse through pattern, rather than wrapping to start
+ * @ramp_oneshot: perform only a single pass over the pattern
+ * @ramp_reverse: iterate over pattern backwards
+ * @ramp_tick_ms: length (in milliseconds) of one step in the pattern
+ * @ramp_lo_pause_ms: pause (in milliseconds) before iterating over pattern
+ * @ramp_hi_pause_ms: pause (in milliseconds) after iterating over pattern
+ * @pattern_lo_idx: start index of associated pattern
+ * @pattern_hi_idx: last index of associated pattern
+ */
+struct lpg_channel {
+	struct lpg *lpg;
+
+	u32 base;
+	unsigned int triled_mask;
+	unsigned int lut_mask;
+	unsigned int subtype;
+
+	bool in_use;
+
+	int color;
+
+	u32 dtest_line;
+	u32 dtest_value;
+
+	u16 pwm_value;
+	bool enabled;
+
+	u64 period;
+	unsigned int clk_sel;
+	unsigned int pre_div_sel;
+	unsigned int pre_div_exp;
+
+	bool ramp_enabled;
+	bool ramp_ping_pong;
+	bool ramp_oneshot;
+	bool ramp_reverse;
+	unsigned short ramp_tick_ms;
+	unsigned long ramp_lo_pause_ms;
+	unsigned long ramp_hi_pause_ms;
+
+	unsigned int pattern_lo_idx;
+	unsigned int pattern_hi_idx;
+};
+
+/**
+ * struct lpg_led - logical LED object
+ * @lpg:		lpg context reference
+ * @cdev:		LED class device
+ * @mcdev:		Multicolor LED class device
+ * @num_channels:	number of @channels
+ * @channels:		list of channels associated with the LED
+ */
+struct lpg_led {
+	struct lpg *lpg;
+
+	struct led_classdev cdev;
+	struct led_classdev_mc mcdev;
+
+	unsigned int num_channels;
+	struct lpg_channel *channels[];
+};
+
+/**
+ * struct lpg_channel_data - per channel initialization data
+ * @base:		base address for PWM channel registers
+ * @triled_mask:	bitmask for controlling this channel in TRILED
+ */
+struct lpg_channel_data {
+	unsigned int base;
+	u8 triled_mask;
+};
+
+/**
+ * struct lpg_data - initialization data
+ * @lut_base:		base address of LUT block
+ * @lut_size:		number of entries in LUT
+ * @triled_base:	base address of TRILED
+ * @triled_has_atc_ctl:	true if there is TRI_LED_ATC_CTL register
+ * @triled_has_src_sel:	true if there is TRI_LED_SRC_SEL register
+ * @num_channels:	number of channels in LPG
+ * @channels:		list of channel initialization data
+ */
+struct lpg_data {
+	unsigned int lut_base;
+	unsigned int lut_size;
+	unsigned int triled_base;
+	bool triled_has_atc_ctl;
+	bool triled_has_src_sel;
+	int num_channels;
+	const struct lpg_channel_data *channels;
+};
+
+static int triled_set(struct lpg *lpg, unsigned int mask, unsigned int enable)
+{
+	/* Skip if we don't have a triled block */
+	if (!lpg->triled_base)
+		return 0;
+
+	return regmap_update_bits(lpg->map, lpg->triled_base + TRI_LED_EN_CTL,
+				  mask, enable);
+}
+
+static int lpg_lut_store(struct lpg *lpg, struct led_pattern *pattern,
+			 size_t len, unsigned int *lo_idx, unsigned int *hi_idx)
+{
+	unsigned int idx;
+	u16 val;
+	int i;
+
+	idx = bitmap_find_next_zero_area(lpg->lut_bitmap, lpg->lut_size,
+					 0, len, 0);
+	if (idx >= lpg->lut_size)
+		return -ENOMEM;
+
+	for (i = 0; i < len; i++) {
+		val = pattern[i].brightness;
+
+		regmap_bulk_write(lpg->map, lpg->lut_base + LPG_LUT_REG(idx + i),
+				  &val, sizeof(val));
+	}
+
+	bitmap_set(lpg->lut_bitmap, idx, len);
+
+	*lo_idx = idx;
+	*hi_idx = idx + len - 1;
+
+	return 0;
+}
+
+static void lpg_lut_free(struct lpg *lpg, unsigned int lo_idx, unsigned int hi_idx)
+{
+	int len;
+
+	len = hi_idx - lo_idx + 1;
+	if (len == 1)
+		return;
+
+	bitmap_clear(lpg->lut_bitmap, lo_idx, len);
+}
+
+static int lpg_lut_sync(struct lpg *lpg, unsigned int mask)
+{
+	return regmap_write(lpg->map, lpg->lut_base + RAMP_CONTROL_REG, mask);
+}
+
+static const unsigned int lpg_clk_rates[] = {0, 1024, 32768, 19200000};
+static const unsigned int lpg_pre_divs[] = {1, 3, 5, 6};
+
+static int lpg_calc_freq(struct lpg_channel *chan, uint64_t period)
+{
+	unsigned int clk_sel, best_clk = 0;
+	unsigned int div, best_div = 0;
+	unsigned int m, best_m = 0;
+	unsigned int error;
+	unsigned int best_err = UINT_MAX;
+	u64 best_period = 0;
+	u64 max_period;
+
+	/*
+	 * The PWM period is determined by:
+	 *
+	 *          resolution * pre_div * 2^M
+	 * period = --------------------------
+	 *                   refclk
+	 *
+	 * With resolution fixed at 2^9 bits, pre_div = {1, 3, 5, 6} and
+	 * M = [0..7].
+	 *
+	 * This allows for periods between 27uS and 384s, as the PWM framework
+	 * wants a period of equal or lower length than requested, reject
+	 * anything below 27uS.
+	 */
+	if (period <= (u64)NSEC_PER_SEC * LPG_RESOLUTION / 19200000)
+		return -EINVAL;
+
+	/* Limit period to largest possible value, to avoid overflows */
+	max_period = (u64)NSEC_PER_SEC * LPG_RESOLUTION * 6 * (1 << LPG_MAX_M) / 1024;
+	if (period > max_period)
+		period = max_period;
+
+	/*
+	 * Search for the pre_div, refclk and M by solving the rewritten formula
+	 * for each refclk and pre_div value:
+	 *
+	 *                     period * refclk
+	 * M = log2 -------------------------------------
+	 *           NSEC_PER_SEC * pre_div * resolution
+	 */
+	for (clk_sel = 1; clk_sel < ARRAY_SIZE(lpg_clk_rates); clk_sel++) {
+		u64 numerator = period * lpg_clk_rates[clk_sel];
+
+		for (div = 0; div < ARRAY_SIZE(lpg_pre_divs); div++) {
+			u64 denominator = (u64)NSEC_PER_SEC * lpg_pre_divs[div] * LPG_RESOLUTION;
+			u64 actual;
+			u64 ratio;
+
+			if (numerator < denominator)
+				continue;
+
+			ratio = div64_u64(numerator, denominator);
+			m = ilog2(ratio);
+			if (m > LPG_MAX_M)
+				m = LPG_MAX_M;
+
+			actual = DIV_ROUND_UP_ULL(denominator * (1 << m), lpg_clk_rates[clk_sel]);
+
+			error = period - actual;
+			if (error < best_err) {
+				best_err = error;
+
+				best_div = div;
+				best_m = m;
+				best_clk = clk_sel;
+				best_period = actual;
+			}
+		}
+	}
+
+	chan->clk_sel = best_clk;
+	chan->pre_div_sel = best_div;
+	chan->pre_div_exp = best_m;
+	chan->period = best_period;
+
+	return 0;
+}
+
+static void lpg_calc_duty(struct lpg_channel *chan, uint64_t duty)
+{
+	unsigned int max = LPG_RESOLUTION - 1;
+	unsigned int val;
+
+	val = div64_u64(duty * lpg_clk_rates[chan->clk_sel],
+			(u64)NSEC_PER_SEC * lpg_pre_divs[chan->pre_div_sel] * (1 << chan->pre_div_exp));
+
+	chan->pwm_value = min(val, max);
+}
+
+static void lpg_apply_freq(struct lpg_channel *chan)
+{
+	unsigned long val;
+	struct lpg *lpg = chan->lpg;
+
+	if (!chan->enabled)
+		return;
+
+	val = chan->clk_sel;
+
+	/* Specify 9bit resolution, based on the subtype of the channel */
+	switch (chan->subtype) {
+	case LPG_SUBTYPE_LPG:
+		val |= GENMASK(5, 4);
+		break;
+	case LPG_SUBTYPE_PWM:
+		val |= BIT(2);
+		break;
+	case LPG_SUBTYPE_LPG_LITE:
+	default:
+		val |= BIT(4);
+		break;
+	}
+
+	regmap_write(lpg->map, chan->base + LPG_SIZE_CLK_REG, val);
+
+	val = FIELD_PREP(PWM_FREQ_PRE_DIV_MASK, chan->pre_div_sel) |
+	      FIELD_PREP(PWM_FREQ_EXP_MASK, chan->pre_div_exp);
+	regmap_write(lpg->map, chan->base + LPG_PREDIV_CLK_REG, val);
+}
+
+#define LPG_ENABLE_GLITCH_REMOVAL	BIT(5)
+
+static void lpg_enable_glitch(struct lpg_channel *chan)
+{
+	struct lpg *lpg = chan->lpg;
+
+	regmap_update_bits(lpg->map, chan->base + PWM_TYPE_CONFIG_REG,
+			   LPG_ENABLE_GLITCH_REMOVAL, 0);
+}
+
+static void lpg_disable_glitch(struct lpg_channel *chan)
+{
+	struct lpg *lpg = chan->lpg;
+
+	regmap_update_bits(lpg->map, chan->base + PWM_TYPE_CONFIG_REG,
+			   LPG_ENABLE_GLITCH_REMOVAL,
+			   LPG_ENABLE_GLITCH_REMOVAL);
+}
+
+static void lpg_apply_pwm_value(struct lpg_channel *chan)
+{
+	struct lpg *lpg = chan->lpg;
+	u16 val = chan->pwm_value;
+
+	if (!chan->enabled)
+		return;
+
+	regmap_bulk_write(lpg->map, chan->base + PWM_VALUE_REG, &val, sizeof(val));
+}
+
+#define LPG_PATTERN_CONFIG_LO_TO_HI	BIT(4)
+#define LPG_PATTERN_CONFIG_REPEAT	BIT(3)
+#define LPG_PATTERN_CONFIG_TOGGLE	BIT(2)
+#define LPG_PATTERN_CONFIG_PAUSE_HI	BIT(1)
+#define LPG_PATTERN_CONFIG_PAUSE_LO	BIT(0)
+
+static void lpg_apply_lut_control(struct lpg_channel *chan)
+{
+	struct lpg *lpg = chan->lpg;
+	unsigned int hi_pause;
+	unsigned int lo_pause;
+	unsigned int conf = 0;
+	unsigned int lo_idx = chan->pattern_lo_idx;
+	unsigned int hi_idx = chan->pattern_hi_idx;
+	u16 step = chan->ramp_tick_ms;
+
+	if (!chan->ramp_enabled || chan->pattern_lo_idx == chan->pattern_hi_idx)
+		return;
+
+	hi_pause = DIV_ROUND_UP(chan->ramp_hi_pause_ms, step);
+	lo_pause = DIV_ROUND_UP(chan->ramp_lo_pause_ms, step);
+
+	if (!chan->ramp_reverse)
+		conf |= LPG_PATTERN_CONFIG_LO_TO_HI;
+	if (!chan->ramp_oneshot)
+		conf |= LPG_PATTERN_CONFIG_REPEAT;
+	if (chan->ramp_ping_pong)
+		conf |= LPG_PATTERN_CONFIG_TOGGLE;
+	if (chan->ramp_hi_pause_ms)
+		conf |= LPG_PATTERN_CONFIG_PAUSE_HI;
+	if (chan->ramp_lo_pause_ms)
+		conf |= LPG_PATTERN_CONFIG_PAUSE_LO;
+
+	regmap_write(lpg->map, chan->base + LPG_PATTERN_CONFIG_REG, conf);
+	regmap_write(lpg->map, chan->base + LPG_HI_IDX_REG, hi_idx);
+	regmap_write(lpg->map, chan->base + LPG_LO_IDX_REG, lo_idx);
+
+	regmap_bulk_write(lpg->map, chan->base + LPG_RAMP_DURATION_REG, &step, sizeof(step));
+	regmap_write(lpg->map, chan->base + LPG_HI_PAUSE_REG, hi_pause);
+	regmap_write(lpg->map, chan->base + LPG_LO_PAUSE_REG, lo_pause);
+}
+
+#define LPG_ENABLE_CONTROL_OUTPUT		BIT(7)
+#define LPG_ENABLE_CONTROL_BUFFER_TRISTATE	BIT(5)
+#define LPG_ENABLE_CONTROL_SRC_PWM		BIT(2)
+#define LPG_ENABLE_CONTROL_RAMP_GEN		BIT(1)
+
+static void lpg_apply_control(struct lpg_channel *chan)
+{
+	unsigned int ctrl;
+	struct lpg *lpg = chan->lpg;
+
+	ctrl = LPG_ENABLE_CONTROL_BUFFER_TRISTATE;
+
+	if (chan->enabled)
+		ctrl |= LPG_ENABLE_CONTROL_OUTPUT;
+
+	if (chan->pattern_lo_idx != chan->pattern_hi_idx)
+		ctrl |= LPG_ENABLE_CONTROL_RAMP_GEN;
+	else
+		ctrl |= LPG_ENABLE_CONTROL_SRC_PWM;
+
+	regmap_write(lpg->map, chan->base + PWM_ENABLE_CONTROL_REG, ctrl);
+
+	/*
+	 * Due to LPG hardware bug, in the PWM mode, having enabled PWM,
+	 * We have to write PWM values one more time.
+	 */
+	if (chan->enabled)
+		lpg_apply_pwm_value(chan);
+}
+
+#define LPG_SYNC_PWM	BIT(0)
+
+static void lpg_apply_sync(struct lpg_channel *chan)
+{
+	struct lpg *lpg = chan->lpg;
+
+	regmap_write(lpg->map, chan->base + PWM_SYNC_REG, LPG_SYNC_PWM);
+}
+
+static int lpg_parse_dtest(struct lpg *lpg)
+{
+	struct lpg_channel *chan;
+	struct device_node *np = lpg->dev->of_node;
+	int count;
+	int ret;
+	int i;
+
+	count = of_property_count_u32_elems(np, "qcom,dtest");
+	if (count == -EINVAL) {
+		return 0;
+	} else if (count < 0) {
+		ret = count;
+		goto err_malformed;
+	} else if (count != lpg->data->num_channels * 2) {
+		dev_err(lpg->dev, "qcom,dtest needs to be %d items\n",
+			lpg->data->num_channels * 2);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < lpg->data->num_channels; i++) {
+		chan = &lpg->channels[i];
+
+		ret = of_property_read_u32_index(np, "qcom,dtest", i * 2,
+						 &chan->dtest_line);
+		if (ret)
+			goto err_malformed;
+
+		ret = of_property_read_u32_index(np, "qcom,dtest", i * 2 + 1,
+						 &chan->dtest_value);
+		if (ret)
+			goto err_malformed;
+	}
+
+	return 0;
+
+err_malformed:
+	dev_err(lpg->dev, "malformed qcom,dtest\n");
+	return ret;
+}
+
+static void lpg_apply_dtest(struct lpg_channel *chan)
+{
+	struct lpg *lpg = chan->lpg;
+
+	if (!chan->dtest_line)
+		return;
+
+	regmap_write(lpg->map, chan->base + PWM_SEC_ACCESS_REG, 0xa5);
+	regmap_write(lpg->map, chan->base + PWM_DTEST_REG(chan->dtest_line),
+		     chan->dtest_value);
+}
+
+static void lpg_apply(struct lpg_channel *chan)
+{
+	lpg_disable_glitch(chan);
+	lpg_apply_freq(chan);
+	lpg_apply_pwm_value(chan);
+	lpg_apply_control(chan);
+	lpg_apply_sync(chan);
+	lpg_apply_lut_control(chan);
+	lpg_enable_glitch(chan);
+}
+
+static void lpg_brightness_set(struct lpg_led *led, struct led_classdev *cdev,
+			       struct mc_subled *subleds)
+{
+	enum led_brightness brightness;
+	struct lpg_channel *chan;
+	unsigned int triled_enabled = 0;
+	unsigned int triled_mask = 0;
+	unsigned int lut_mask = 0;
+	unsigned int duty;
+	struct lpg *lpg = led->lpg;
+	int i;
+
+	for (i = 0; i < led->num_channels; i++) {
+		chan = led->channels[i];
+		brightness = subleds[i].brightness;
+
+		if (brightness == LED_OFF) {
+			chan->enabled = false;
+			chan->ramp_enabled = false;
+		} else if (chan->pattern_lo_idx != chan->pattern_hi_idx) {
+			lpg_calc_freq(chan, NSEC_PER_MSEC);
+
+			chan->enabled = true;
+			chan->ramp_enabled = true;
+
+			lut_mask |= chan->lut_mask;
+			triled_enabled |= chan->triled_mask;
+		} else {
+			lpg_calc_freq(chan, NSEC_PER_MSEC);
+
+			duty = div_u64(brightness * chan->period, cdev->max_brightness);
+			lpg_calc_duty(chan, duty);
+			chan->enabled = true;
+			chan->ramp_enabled = false;
+
+			triled_enabled |= chan->triled_mask;
+		}
+
+		triled_mask |= chan->triled_mask;
+
+		lpg_apply(chan);
+	}
+
+	/* Toggle triled lines */
+	if (triled_mask)
+		triled_set(lpg, triled_mask, triled_enabled);
+
+	/* Trigger start of ramp generator(s) */
+	if (lut_mask)
+		lpg_lut_sync(lpg, lut_mask);
+}
+
+static void lpg_brightness_single_set(struct led_classdev *cdev,
+				      enum led_brightness value)
+{
+	struct lpg_led *led = container_of(cdev, struct lpg_led, cdev);
+	struct mc_subled info;
+
+	mutex_lock(&led->lpg->lock);
+
+	info.brightness = value;
+	lpg_brightness_set(led, cdev, &info);
+
+	mutex_unlock(&led->lpg->lock);
+}
+
+static void lpg_brightness_mc_set(struct led_classdev *cdev,
+				  enum led_brightness value)
+{
+	struct led_classdev_mc *mc = lcdev_to_mccdev(cdev);
+	struct lpg_led *led = container_of(mc, struct lpg_led, mcdev);
+
+	mutex_lock(&led->lpg->lock);
+
+	led_mc_calc_color_components(mc, value);
+	lpg_brightness_set(led, cdev, mc->subled_info);
+
+	mutex_unlock(&led->lpg->lock);
+}
+
+static int lpg_blink_set(struct lpg_led *led,
+			 unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct lpg_channel *chan;
+	unsigned int period;
+	unsigned int triled_mask = 0;
+	struct lpg *lpg = led->lpg;
+	u64 duty;
+	int i;
+
+	if (!*delay_on && !*delay_off) {
+		*delay_on = 500;
+		*delay_off = 500;
+	}
+
+	duty = *delay_on * NSEC_PER_MSEC;
+	period = (*delay_on + *delay_off) * NSEC_PER_MSEC;
+
+	for (i = 0; i < led->num_channels; i++) {
+		chan = led->channels[i];
+
+		lpg_calc_freq(chan, period);
+		lpg_calc_duty(chan, duty);
+
+		chan->enabled = true;
+		chan->ramp_enabled = false;
+
+		triled_mask |= chan->triled_mask;
+
+		lpg_apply(chan);
+	}
+
+	/* Enable triled lines */
+	triled_set(lpg, triled_mask, triled_mask);
+
+	chan = led->channels[0];
+	duty = div_u64(chan->pwm_value * chan->period, LPG_RESOLUTION);
+	*delay_on = div_u64(duty, NSEC_PER_MSEC);
+	*delay_off = div_u64(chan->period - duty, NSEC_PER_MSEC);
+
+	return 0;
+}
+
+static int lpg_blink_single_set(struct led_classdev *cdev,
+				unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct lpg_led *led = container_of(cdev, struct lpg_led, cdev);
+	int ret;
+
+	mutex_lock(&led->lpg->lock);
+
+	ret = lpg_blink_set(led, delay_on, delay_off);
+
+	mutex_unlock(&led->lpg->lock);
+
+	return ret;
+}
+
+static int lpg_blink_mc_set(struct led_classdev *cdev,
+			    unsigned long *delay_on, unsigned long *delay_off)
+{
+	struct led_classdev_mc *mc = lcdev_to_mccdev(cdev);
+	struct lpg_led *led = container_of(mc, struct lpg_led, mcdev);
+	int ret;
+
+	mutex_lock(&led->lpg->lock);
+
+	ret = lpg_blink_set(led, delay_on, delay_off);
+
+	mutex_unlock(&led->lpg->lock);
+
+	return ret;
+}
+
+static int lpg_pattern_set(struct lpg_led *led, struct led_pattern *led_pattern,
+			   u32 len, int repeat)
+{
+	struct lpg_channel *chan;
+	struct lpg *lpg = led->lpg;
+	struct led_pattern *pattern;
+	unsigned int brightness_a;
+	unsigned int brightness_b;
+	unsigned int actual_len;
+	unsigned int hi_pause;
+	unsigned int lo_pause;
+	unsigned int delta_t;
+	unsigned int lo_idx;
+	unsigned int hi_idx;
+	unsigned int i;
+	bool ping_pong = true;
+	int ret = -EINVAL;
+
+	/* Hardware only support oneshot or indefinite loops */
+	if (repeat != -1 && repeat != 1)
+		return -EINVAL;
+
+	/*
+	 * The standardized leds-trigger-pattern format defines that the
+	 * brightness of the LED follows a linear transition from one entry
+	 * in the pattern to the next, over the given delta_t time. It
+	 * describes that the way to perform instant transitions a zero-length
+	 * entry should be added following a pattern entry.
+	 *
+	 * The LPG hardware is only able to perform the latter (no linear
+	 * transitions), so require each entry in the pattern to be followed by
+	 * a zero-length transition.
+	 */
+	if (len % 2)
+		return -EINVAL;
+
+	pattern = kcalloc(len / 2, sizeof(*pattern), GFP_KERNEL);
+	if (!pattern)
+		return -ENOMEM;
+
+	for (i = 0; i < len; i += 2) {
+		if (led_pattern[i].brightness != led_pattern[i + 1].brightness)
+			goto out_free_pattern;
+		if (led_pattern[i + 1].delta_t != 0)
+			goto out_free_pattern;
+
+		pattern[i / 2].brightness = led_pattern[i].brightness;
+		pattern[i / 2].delta_t = led_pattern[i].delta_t;
+	}
+
+	len /= 2;
+
+	/*
+	 * Specifying a pattern of length 1 causes the hardware to iterate
+	 * through the entire LUT, so prohibit this.
+	 */
+	if (len < 2)
+		goto out_free_pattern;
+
+	/*
+	 * The LPG plays patterns with at a fixed pace, a "low pause" can be
+	 * used to stretch the first delay of the pattern and a "high pause"
+	 * the last one.
+	 *
+	 * In order to save space the pattern can be played in "ping pong"
+	 * mode, in which the pattern is first played forward, then "high
+	 * pause" is applied, then the pattern is played backwards and finally
+	 * the "low pause" is applied.
+	 *
+	 * The middle elements of the pattern are used to determine delta_t and
+	 * the "low pause" and "high pause" multipliers are derrived from this.
+	 *
+	 * The first element in the pattern is used to determine "low pause".
+	 *
+	 * If the specified pattern is a palindrome the ping pong mode is
+	 * enabled. In this scenario the delta_t of the middle entry (i.e. the
+	 * last in the programmed pattern) determines the "high pause".
+	 */
+
+	/* Detect palindromes and use "ping pong" to reduce LUT usage */
+	for (i = 0; i < len / 2; i++) {
+		brightness_a = pattern[i].brightness;
+		brightness_b = pattern[len - i - 1].brightness;
+
+		if (brightness_a != brightness_b) {
+			ping_pong = false;
+			break;
+		}
+	}
+
+	/* The pattern length to be written to the LUT */
+	if (ping_pong)
+		actual_len = (len + 1) / 2;
+	else
+		actual_len = len;
+
+	/*
+	 * Validate that all delta_t in the pattern are the same, with the
+	 * exception of the middle element in case of ping_pong.
+	 */
+	delta_t = pattern[1].delta_t;
+	for (i = 2; i < len; i++) {
+		if (pattern[i].delta_t != delta_t) {
+			/*
+			 * Allow last entry in the full or shortened pattern to
+			 * specify hi pause. Reject other variations.
+			 */
+			if (i != actual_len - 1)
+				goto out_free_pattern;
+		}
+	}
+
+	/* LPG_RAMP_DURATION_REG is a 9bit */
+	if (delta_t >= BIT(9))
+		goto out_free_pattern;
+
+	/* Find "low pause" and "high pause" in the pattern */
+	lo_pause = pattern[0].delta_t;
+	hi_pause = pattern[actual_len - 1].delta_t;
+
+	mutex_lock(&lpg->lock);
+	ret = lpg_lut_store(lpg, pattern, actual_len, &lo_idx, &hi_idx);
+	if (ret < 0)
+		goto out_unlock;
+
+	for (i = 0; i < led->num_channels; i++) {
+		chan = led->channels[i];
+
+		chan->ramp_tick_ms = delta_t;
+		chan->ramp_ping_pong = ping_pong;
+		chan->ramp_oneshot = repeat != -1;
+
+		chan->ramp_lo_pause_ms = lo_pause;
+		chan->ramp_hi_pause_ms = hi_pause;
+
+		chan->pattern_lo_idx = lo_idx;
+		chan->pattern_hi_idx = hi_idx;
+	}
+
+out_unlock:
+	mutex_unlock(&lpg->lock);
+out_free_pattern:
+	kfree(pattern);
+
+	return ret;
+}
+
+static int lpg_pattern_single_set(struct led_classdev *cdev,
+				  struct led_pattern *pattern, u32 len,
+				  int repeat)
+{
+	struct lpg_led *led = container_of(cdev, struct lpg_led, cdev);
+	int ret;
+
+	ret = lpg_pattern_set(led, pattern, len, repeat);
+	if (ret < 0)
+		return ret;
+
+	lpg_brightness_single_set(cdev, LED_FULL);
+
+	return 0;
+}
+
+static int lpg_pattern_mc_set(struct led_classdev *cdev,
+			      struct led_pattern *pattern, u32 len,
+			      int repeat)
+{
+	struct led_classdev_mc *mc = lcdev_to_mccdev(cdev);
+	struct lpg_led *led = container_of(mc, struct lpg_led, mcdev);
+	int ret;
+
+	ret = lpg_pattern_set(led, pattern, len, repeat);
+	if (ret < 0)
+		return ret;
+
+	led_mc_calc_color_components(mc, LED_FULL);
+	lpg_brightness_set(led, cdev, mc->subled_info);
+
+	return 0;
+}
+
+static int lpg_pattern_clear(struct lpg_led *led)
+{
+	struct lpg_channel *chan;
+	struct lpg *lpg = led->lpg;
+	int i;
+
+	mutex_lock(&lpg->lock);
+
+	chan = led->channels[0];
+	lpg_lut_free(lpg, chan->pattern_lo_idx, chan->pattern_hi_idx);
+
+	for (i = 0; i < led->num_channels; i++) {
+		chan = led->channels[i];
+		chan->pattern_lo_idx = 0;
+		chan->pattern_hi_idx = 0;
+	}
+
+	mutex_unlock(&lpg->lock);
+
+	return 0;
+}
+
+static int lpg_pattern_single_clear(struct led_classdev *cdev)
+{
+	struct lpg_led *led = container_of(cdev, struct lpg_led, cdev);
+
+	return lpg_pattern_clear(led);
+}
+
+static int lpg_pattern_mc_clear(struct led_classdev *cdev)
+{
+	struct led_classdev_mc *mc = lcdev_to_mccdev(cdev);
+	struct lpg_led *led = container_of(mc, struct lpg_led, mcdev);
+
+	return lpg_pattern_clear(led);
+}
+
+static int lpg_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
+{
+	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
+
+	return chan->in_use ? -EBUSY : 0;
+}
+
+/*
+ * Limitations:
+ * - Updating both duty and period is not done atomically, so the output signal
+ *   will momentarily be a mix of the settings.
+ * - Changed parameters takes effect immediately.
+ * - A disabled channel outputs a logical 0.
+ */
+static int lpg_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			 const struct pwm_state *state)
+{
+	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
+	int ret = 0;
+
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	mutex_lock(&lpg->lock);
+
+	if (state->enabled) {
+		ret = lpg_calc_freq(chan, state->period);
+		if (ret < 0)
+			goto out_unlock;
+
+		lpg_calc_duty(chan, state->duty_cycle);
+	}
+	chan->enabled = state->enabled;
+
+	lpg_apply(chan);
+
+	triled_set(lpg, chan->triled_mask, chan->enabled ? chan->triled_mask : 0);
+
+out_unlock:
+	mutex_unlock(&lpg->lock);
+
+	return ret;
+}
+
+static void lpg_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
+			      struct pwm_state *state)
+{
+	struct lpg *lpg = container_of(chip, struct lpg, pwm);
+	struct lpg_channel *chan = &lpg->channels[pwm->hwpwm];
+	unsigned int pre_div;
+	unsigned int refclk;
+	unsigned int val;
+	unsigned int m;
+	u16 pwm_value;
+	int ret;
+
+	ret = regmap_read(lpg->map, chan->base + LPG_SIZE_CLK_REG, &val);
+	if (ret)
+		return;
+
+	refclk = lpg_clk_rates[val & PWM_CLK_SELECT_MASK];
+	if (refclk) {
+		ret = regmap_read(lpg->map, chan->base + LPG_PREDIV_CLK_REG, &val);
+		if (ret)
+			return;
+
+		pre_div = lpg_pre_divs[FIELD_GET(PWM_FREQ_PRE_DIV_MASK, val)];
+		m = FIELD_GET(PWM_FREQ_EXP_MASK, val);
+
+		ret = regmap_bulk_read(lpg->map, chan->base + PWM_VALUE_REG, &pwm_value, sizeof(pwm_value));
+		if (ret)
+			return;
+
+		state->period = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * LPG_RESOLUTION * pre_div * (1 << m), refclk);
+		state->duty_cycle = DIV_ROUND_UP_ULL((u64)NSEC_PER_SEC * pwm_value * pre_div * (1 << m), refclk);
+	} else {
+		state->period = 0;
+		state->duty_cycle = 0;
+	}
+
+	ret = regmap_read(lpg->map, chan->base + PWM_ENABLE_CONTROL_REG, &val);
+	if (ret)
+		return;
+
+	state->enabled = FIELD_GET(LPG_ENABLE_CONTROL_OUTPUT, val);
+	state->polarity = PWM_POLARITY_NORMAL;
+
+	if (state->duty_cycle > state->period)
+		state->duty_cycle = state->period;
+}
+
+static const struct pwm_ops lpg_pwm_ops = {
+	.request = lpg_pwm_request,
+	.apply = lpg_pwm_apply,
+	.get_state = lpg_pwm_get_state,
+	.owner = THIS_MODULE,
+};
+
+static int lpg_add_pwm(struct lpg *lpg)
+{
+	int ret;
+
+	lpg->pwm.base = -1;
+	lpg->pwm.dev = lpg->dev;
+	lpg->pwm.npwm = lpg->num_channels;
+	lpg->pwm.ops = &lpg_pwm_ops;
+
+	ret = pwmchip_add(&lpg->pwm);
+	if (ret)
+		dev_err(lpg->dev, "failed to add PWM chip: ret %d\n", ret);
+
+	return ret;
+}
+
+static int lpg_parse_channel(struct lpg *lpg, struct device_node *np,
+			     struct lpg_channel **channel)
+{
+	struct lpg_channel *chan;
+	u32 color = LED_COLOR_ID_GREEN;
+	u32 reg;
+	int ret;
+
+	ret = of_property_read_u32(np, "reg", &reg);
+	if (ret || !reg || reg > lpg->num_channels) {
+		dev_err(lpg->dev, "invalid \"reg\" of %pOFn\n", np);
+		return -EINVAL;
+	}
+
+	chan = &lpg->channels[reg - 1];
+	chan->in_use = true;
+
+	ret = of_property_read_u32(np, "color", &color);
+	if (ret < 0 && ret != -EINVAL) {
+		dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
+		return ret;
+	}
+
+	chan->color = color;
+
+	*channel = chan;
+
+	return 0;
+}
+
+static int lpg_add_led(struct lpg *lpg, struct device_node *np)
+{
+	struct led_init_data init_data = {};
+	struct led_classdev *cdev;
+	struct device_node *child;
+	struct mc_subled *info;
+	struct lpg_led *led;
+	const char *state;
+	int num_channels;
+	u32 color = 0;
+	int ret;
+	int i;
+
+	ret = of_property_read_u32(np, "color", &color);
+	if (ret < 0 && ret != -EINVAL) {
+		dev_err(lpg->dev, "failed to parse \"color\" of %pOF\n", np);
+		return ret;
+	}
+
+	if (color == LED_COLOR_ID_RGB)
+		num_channels = of_get_available_child_count(np);
+	else
+		num_channels = 1;
+
+	led = devm_kzalloc(lpg->dev, struct_size(led, channels, num_channels), GFP_KERNEL);
+	if (!led)
+		return -ENOMEM;
+
+	led->lpg = lpg;
+	led->num_channels = num_channels;
+
+	if (color == LED_COLOR_ID_RGB) {
+		info = devm_kcalloc(lpg->dev, num_channels, sizeof(*info), GFP_KERNEL);
+		if (!info)
+			return -ENOMEM;
+		i = 0;
+		for_each_available_child_of_node(np, child) {
+			ret = lpg_parse_channel(lpg, child, &led->channels[i]);
+			if (ret < 0)
+				return ret;
+
+			info[i].color_index = led->channels[i]->color;
+			info[i].intensity = 0;
+			i++;
+		}
+
+		led->mcdev.subled_info = info;
+		led->mcdev.num_colors = num_channels;
+
+		cdev = &led->mcdev.led_cdev;
+		cdev->brightness_set = lpg_brightness_mc_set;
+		cdev->blink_set = lpg_blink_mc_set;
+
+		/* Register pattern accessors only if we have a LUT block */
+		if (lpg->lut_base) {
+			cdev->pattern_set = lpg_pattern_mc_set;
+			cdev->pattern_clear = lpg_pattern_mc_clear;
+		}
+	} else {
+		ret = lpg_parse_channel(lpg, np, &led->channels[0]);
+		if (ret < 0)
+			return ret;
+
+		cdev = &led->cdev;
+		cdev->brightness_set = lpg_brightness_single_set;
+		cdev->blink_set = lpg_blink_single_set;
+
+		/* Register pattern accessors only if we have a LUT block */
+		if (lpg->lut_base) {
+			cdev->pattern_set = lpg_pattern_single_set;
+			cdev->pattern_clear = lpg_pattern_single_clear;
+		}
+	}
+
+	cdev->default_trigger = of_get_property(np, "linux,default-trigger", NULL);
+	cdev->max_brightness = LPG_RESOLUTION - 1;
+
+	if (!of_property_read_string(np, "default-state", &state) &&
+	    !strcmp(state, "on"))
+		cdev->brightness = cdev->max_brightness;
+	else
+		cdev->brightness = LED_OFF;
+
+	cdev->brightness_set(cdev, cdev->brightness);
+
+	init_data.fwnode = of_fwnode_handle(np);
+
+	if (color == LED_COLOR_ID_RGB)
+		ret = devm_led_classdev_multicolor_register_ext(lpg->dev, &led->mcdev, &init_data);
+	else
+		ret = devm_led_classdev_register_ext(lpg->dev, &led->cdev, &init_data);
+	if (ret)
+		dev_err(lpg->dev, "unable to register %s\n", cdev->name);
+
+	return ret;
+}
+
+static int lpg_init_channels(struct lpg *lpg)
+{
+	const struct lpg_data *data = lpg->data;
+	struct lpg_channel *chan;
+	int i;
+
+	lpg->num_channels = data->num_channels;
+	lpg->channels = devm_kcalloc(lpg->dev, data->num_channels,
+				     sizeof(struct lpg_channel), GFP_KERNEL);
+	if (!lpg->channels)
+		return -ENOMEM;
+
+	for (i = 0; i < data->num_channels; i++) {
+		chan = &lpg->channels[i];
+
+		chan->lpg = lpg;
+		chan->base = data->channels[i].base;
+		chan->triled_mask = data->channels[i].triled_mask;
+		chan->lut_mask = BIT(i);
+
+		regmap_read(lpg->map, chan->base + LPG_SUBTYPE_REG, &chan->subtype);
+	}
+
+	return 0;
+}
+
+static int lpg_init_triled(struct lpg *lpg)
+{
+	struct device_node *np = lpg->dev->of_node;
+	int ret;
+
+	/* Skip initialization if we don't have a triled block */
+	if (!lpg->data->triled_base)
+		return 0;
+
+	lpg->triled_base = lpg->data->triled_base;
+	lpg->triled_has_atc_ctl = lpg->data->triled_has_atc_ctl;
+	lpg->triled_has_src_sel = lpg->data->triled_has_src_sel;
+
+	if (lpg->triled_has_src_sel) {
+		ret = of_property_read_u32(np, "qcom,power-source", &lpg->triled_src);
+		if (ret || lpg->triled_src == 2 || lpg->triled_src > 3) {
+			dev_err(lpg->dev, "invalid power source\n");
+			return -EINVAL;
+		}
+	}
+
+	/* Disable automatic trickle charge LED */
+	if (lpg->triled_has_atc_ctl)
+		regmap_write(lpg->map, lpg->triled_base + TRI_LED_ATC_CTL, 0);
+
+	/* Configure power source */
+	if (lpg->triled_has_src_sel)
+		regmap_write(lpg->map, lpg->triled_base + TRI_LED_SRC_SEL, lpg->triled_src);
+
+	/* Default all outputs to off */
+	regmap_write(lpg->map, lpg->triled_base + TRI_LED_EN_CTL, 0);
+
+	return 0;
+}
+
+static int lpg_init_lut(struct lpg *lpg)
+{
+	const struct lpg_data *data = lpg->data;
+
+	if (!data->lut_base)
+		return 0;
+
+	lpg->lut_base = data->lut_base;
+	lpg->lut_size = data->lut_size;
+
+	lpg->lut_bitmap = devm_bitmap_zalloc(lpg->dev, lpg->lut_size, GFP_KERNEL);
+	if (!lpg->lut_bitmap)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static int lpg_probe(struct platform_device *pdev)
+{
+	struct device_node *np;
+	struct lpg *lpg;
+	int ret;
+	int i;
+
+	lpg = devm_kzalloc(&pdev->dev, sizeof(*lpg), GFP_KERNEL);
+	if (!lpg)
+		return -ENOMEM;
+
+	lpg->data = of_device_get_match_data(&pdev->dev);
+	if (!lpg->data)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, lpg);
+
+	lpg->dev = &pdev->dev;
+	mutex_init(&lpg->lock);
+
+	lpg->map = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!lpg->map)
+		return dev_err_probe(&pdev->dev, -ENXIO, "parent regmap unavailable\n");
+
+	ret = lpg_init_channels(lpg);
+	if (ret < 0)
+		return ret;
+
+	ret = lpg_parse_dtest(lpg);
+	if (ret < 0)
+		return ret;
+
+	ret = lpg_init_triled(lpg);
+	if (ret < 0)
+		return ret;
+
+	ret = lpg_init_lut(lpg);
+	if (ret < 0)
+		return ret;
+
+	for_each_available_child_of_node(pdev->dev.of_node, np) {
+		ret = lpg_add_led(lpg, np);
+		if (ret)
+			return ret;
+	}
+
+	for (i = 0; i < lpg->num_channels; i++)
+		lpg_apply_dtest(&lpg->channels[i]);
+
+	return lpg_add_pwm(lpg);
+}
+
+static int lpg_remove(struct platform_device *pdev)
+{
+	struct lpg *lpg = platform_get_drvdata(pdev);
+
+	pwmchip_remove(&lpg->pwm);
+
+	return 0;
+}
+
+static const struct lpg_data pm8916_pwm_data = {
+	.num_channels = 1,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xbc00 },
+	},
+};
+
+static const struct lpg_data pm8941_lpg_data = {
+	.lut_base = 0xb000,
+	.lut_size = 64,
+
+	.triled_base = 0xd000,
+	.triled_has_atc_ctl = true,
+	.triled_has_src_sel = true,
+
+	.num_channels = 8,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb100 },
+		{ .base = 0xb200 },
+		{ .base = 0xb300 },
+		{ .base = 0xb400 },
+		{ .base = 0xb500, .triled_mask = BIT(5) },
+		{ .base = 0xb600, .triled_mask = BIT(6) },
+		{ .base = 0xb700, .triled_mask = BIT(7) },
+		{ .base = 0xb800 },
+	},
+};
+
+static const struct lpg_data pm8994_lpg_data = {
+	.lut_base = 0xb000,
+	.lut_size = 64,
+
+	.num_channels = 6,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb100 },
+		{ .base = 0xb200 },
+		{ .base = 0xb300 },
+		{ .base = 0xb400 },
+		{ .base = 0xb500 },
+		{ .base = 0xb600 },
+	},
+};
+
+static const struct lpg_data pmi8994_lpg_data = {
+	.lut_base = 0xb000,
+	.lut_size = 24,
+
+	.triled_base = 0xd000,
+	.triled_has_atc_ctl = true,
+	.triled_has_src_sel = true,
+
+	.num_channels = 4,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb100, .triled_mask = BIT(5) },
+		{ .base = 0xb200, .triled_mask = BIT(6) },
+		{ .base = 0xb300, .triled_mask = BIT(7) },
+		{ .base = 0xb400 },
+	},
+};
+
+static const struct lpg_data pmi8998_lpg_data = {
+	.lut_base = 0xb000,
+	.lut_size = 49,
+
+	.triled_base = 0xd000,
+
+	.num_channels = 6,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb100 },
+		{ .base = 0xb200 },
+		{ .base = 0xb300, .triled_mask = BIT(5) },
+		{ .base = 0xb400, .triled_mask = BIT(6) },
+		{ .base = 0xb500, .triled_mask = BIT(7) },
+		{ .base = 0xb600 },
+	},
+};
+
+static const struct lpg_data pm8150b_lpg_data = {
+	.lut_base = 0xb000,
+	.lut_size = 24,
+
+	.triled_base = 0xd000,
+
+	.num_channels = 2,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb100, .triled_mask = BIT(7) },
+		{ .base = 0xb200, .triled_mask = BIT(6) },
+	},
+};
+
+static const struct lpg_data pm8150l_lpg_data = {
+	.lut_base = 0xb000,
+	.lut_size = 48,
+
+	.triled_base = 0xd000,
+
+	.num_channels = 5,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xb100, .triled_mask = BIT(7) },
+		{ .base = 0xb200, .triled_mask = BIT(6) },
+		{ .base = 0xb300, .triled_mask = BIT(5) },
+		{ .base = 0xbc00 },
+		{ .base = 0xbd00 },
+
+	},
+};
+
+static const struct lpg_data pm8350c_pwm_data = {
+	.triled_base = 0xef00,
+
+	.num_channels = 4,
+	.channels = (const struct lpg_channel_data[]) {
+		{ .base = 0xe800, .triled_mask = BIT(7) },
+		{ .base = 0xe900, .triled_mask = BIT(6) },
+		{ .base = 0xea00, .triled_mask = BIT(5) },
+		{ .base = 0xeb00 },
+	},
+};
+
+static const struct of_device_id lpg_of_table[] = {
+	{ .compatible = "qcom,pm8150b-lpg", .data = &pm8150b_lpg_data },
+	{ .compatible = "qcom,pm8150l-lpg", .data = &pm8150l_lpg_data },
+	{ .compatible = "qcom,pm8350c-pwm", .data = &pm8350c_pwm_data },
+	{ .compatible = "qcom,pm8916-pwm", .data = &pm8916_pwm_data },
+	{ .compatible = "qcom,pm8941-lpg", .data = &pm8941_lpg_data },
+	{ .compatible = "qcom,pm8994-lpg", .data = &pm8994_lpg_data },
+	{ .compatible = "qcom,pmi8994-lpg", .data = &pmi8994_lpg_data },
+	{ .compatible = "qcom,pmi8998-lpg", .data = &pmi8998_lpg_data },
+	{ .compatible = "qcom,pmc8180c-lpg", .data = &pm8150l_lpg_data },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lpg_of_table);
+
+static struct platform_driver lpg_driver = {
+	.probe = lpg_probe,
+	.remove = lpg_remove,
+	.driver = {
+		.name = "qcom-spmi-lpg",
+		.of_match_table = lpg_of_table,
+	},
+};
+module_platform_driver(lpg_driver);
+
+MODULE_DESCRIPTION("Qualcomm LPG LED driver");
+MODULE_LICENSE("GPL v2");