[MTD] NAND whitespace and formatting cleanup

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

2 files changed, 96 insertions, 111 deletions

diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 7933ca273c95..6ef1893996ce 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -10,7 +10,7 @@
  *	http://www.linux-mtd.infradead.org/tech/nand.html
  *
  *  Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
- * 		  2002 Thomas Gleixner (tglx@linutronix.de)
+ *		  2002 Thomas Gleixner (tglx@linutronix.de)
  *
  *  02-08-2004  tglx: support for strange chips, which cannot auto increment
  *		pages on read / read_oob
@@ -25,26 +25,30 @@
  *  05-19-2004  tglx: Basic support for Renesas AG-AND chips
  *
  *  09-24-2004  tglx: add support for hardware controllers (e.g. ECC) shared
- *		among multiple independend devices. Suggestions and initial patch
- *		from Ben Dooks <ben-mtd@fluff.org>
- *
- *  12-05-2004	dmarlin: add workaround for Renesas AG-AND chips "disturb" issue.
- *		Basically, any block not rewritten may lose data when surrounding blocks
- *		are rewritten many times.  JFFS2 ensures this doesn't happen for blocks
- *		it uses, but the Bad Block Table(s) may not be rewritten.  To ensure they
- *		do not lose data, force them to be rewritten when some of the surrounding
- *		blocks are erased.  Rather than tracking a specific nearby block (which
- *		could itself go bad), use a page address 'mask' to select several blocks
- *		in the same area, and rewrite the BBT when any of them are erased.
- *
- *  01-03-2005	dmarlin: added support for the device recovery command sequence for Renesas
- *		AG-AND chips.  If there was a sudden loss of power during an erase operation,
- * 		a "device recovery" operation must be performed when power is restored
- * 		to ensure correct operation.
- *
- *  01-20-2005	dmarlin: added support for optional hardware specific callback routine to
- *		perform extra error status checks on erase and write failures.  This required
- *		adding a wrapper function for nand_read_ecc.
+ *		among multiple independend devices. Suggestions and initial
+ *		patch from Ben Dooks <ben-mtd@fluff.org>
+ *
+ *  12-05-2004	dmarlin: add workaround for Renesas AG-AND chips "disturb"
+ *		issue. Basically, any block not rewritten may lose data when
+ *		surrounding blocks are rewritten many times.  JFFS2 ensures
+ *		this doesn't happen for blocks it uses, but the Bad Block
+ *		Table(s) may not be rewritten.  To ensure they do not lose
+ *		data, force them to be rewritten when some of the surrounding
+ *		blocks are erased.  Rather than tracking a specific nearby
+ *		block (which could itself go bad), use a page address 'mask' to
+ *		select several blocks in the same area, and rewrite the BBT
+ *		when any of them are erased.
+ *
+ *  01-03-2005	dmarlin: added support for the device recovery command sequence
+ *		for Renesas AG-AND chips.  If there was a sudden loss of power
+ *		during an erase operation, a "device recovery" operation must
+ *		be performed when power is restored to ensure correct
+ *		operation.
+ *
+ *  01-20-2005	dmarlin: added support for optional hardware specific callback
+ *		routine to perform extra error status checks on erase and write
+ *		failures.  This required adding a wrapper function for
+ *		nand_read_ecc.
  *
  * 08-20-2005	vwool: suspend/resume added
  *
@@ -132,32 +136,43 @@ static void nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len);
 static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len);
 static int nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len);
 
-static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
+static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
+		     size_t *retlen, u_char *buf);
 static int nand_read_ecc(struct mtd_info *mtd, loff_t from, size_t len,
-			 size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-static int nand_read_oob(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf);
-static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
+			 size_t *retlen, u_char *buf, u_char *eccbuf,
+			 struct nand_oobinfo *oobsel);
+static int nand_read_oob(struct mtd_info *mtd, loff_t from, size_t len,
+			 size_t *retlen, u_char *buf);
+static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+		      size_t *retlen, const u_char *buf);
 static int nand_write_ecc(struct mtd_info *mtd, loff_t to, size_t len,
-			  size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel);
-static int nand_write_oob(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf);
-static int nand_writev(struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen);
+			  size_t *retlen, const u_char *buf, u_char *eccbuf,
+			  struct nand_oobinfo *oobsel);
+static int nand_write_oob(struct mtd_info *mtd, loff_t to, size_t len,
+			  size_t *retlen, const u_char *buf);
+static int nand_writev(struct mtd_info *mtd, const struct kvec *vecs,
+		       unsigned long count, loff_t to, size_t *retlen);
 static int nand_writev_ecc(struct mtd_info *mtd, const struct kvec *vecs,
-			   unsigned long count, loff_t to, size_t *retlen, u_char *eccbuf,
-			   struct nand_oobinfo *oobsel);
+			   unsigned long count, loff_t to, size_t *retlen,
+			   u_char *eccbuf, struct nand_oobinfo *oobsel);
 static int nand_erase(struct mtd_info *mtd, struct erase_info *instr);
 static void nand_sync(struct mtd_info *mtd);
 
 /* Some internal functions */
-static int nand_write_page(struct mtd_info *mtd, struct nand_chip *this, int page, u_char * oob_buf,
+static int nand_write_page(struct mtd_info *mtd, struct nand_chip *this,
+			   int page, u_char * oob_buf,
 			   struct nand_oobinfo *oobsel, int mode);
 #ifdef CONFIG_MTD_NAND_VERIFY_WRITE
-static int nand_verify_pages(struct mtd_info *mtd, struct nand_chip *this, int page, int numpages,
-			     u_char *oob_buf, struct nand_oobinfo *oobsel, int chipnr, int oobmode);
+static int nand_verify_pages(struct mtd_info *mtd, struct nand_chip *this,
+			     int page, int numpages, u_char *oob_buf,
+			     struct nand_oobinfo *oobsel, int chipnr,
+			     int oobmode);
 #else
 #define nand_verify_pages(...) (0)
 #endif
 
-static int nand_get_device(struct nand_chip *this, struct mtd_info *mtd, int new_state);
+static int nand_get_device(struct nand_chip *this, struct mtd_info *mtd,
+			   int new_state);
 
 /**
  * nand_release_device - [GENERIC] release chip
@@ -424,14 +439,16 @@ static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
 		page = (int)ofs;
 
 	if (this->options & NAND_BUSWIDTH_16) {
-		this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE, page & this->pagemask);
+		this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos & 0xFE,
+			      page & this->pagemask);
 		bad = cpu_to_le16(this->read_word(mtd));
 		if (this->badblockpos & 0x1)
 			bad >>= 8;
 		if ((bad & 0xFF) != 0xff)
 			res = 1;
 	} else {
-		this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos, page & this->pagemask);
+		this->cmdfunc(mtd, NAND_CMD_READOOB, this->badblockpos,
+			      page & this->pagemask);
 		if (this->read_byte(mtd) != 0xff)
 			res = 1;
 	}
@@ -498,7 +515,8 @@ static int nand_check_wp(struct mtd_info *mtd)
  * Check, if the block is bad. Either by reading the bad block table or
  * calling of the scan function.
  */
-static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip, int allowbbt)
+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
+			       int allowbbt)
 {
 	struct nand_chip *this = mtd->priv;
 
@@ -540,7 +558,8 @@ static void nand_wait_ready(struct mtd_info *mtd)
  * Send command to NAND device. This function is used for small page
  * devices (256/512 Bytes per page)
  */
-static void nand_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
+static void nand_command(struct mtd_info *mtd, unsigned command, int column,
+			 int page_addr)
 {
 	register struct nand_chip *this = mtd->priv;
 
@@ -755,7 +774,8 @@ static void nand_command_lp(struct mtd_info *mtd, unsigned command, int column,
  *
  * Get the device and lock it for exclusive access
  */
-static int nand_get_device(struct nand_chip *this, struct mtd_info *mtd, int new_state)
+static int
+nand_get_device(struct nand_chip *this, struct mtd_info *mtd, int new_state)
 {
 	spinlock_t *lock = &this->controller->lock;
 	wait_queue_head_t *wq = &this->controller->wq;
@@ -942,7 +962,7 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *this, int pag
  * nand_verify_pages - [GENERIC] verify the chip contents after a write
  * @mtd:	MTD device structure
  * @this:	NAND chip structure
- * @page: 	startpage inside the chip, must be called with (page & this->pagemask)
+ * @page:	startpage inside the chip, must be called with (page & this->pagemask)
  * @numpages:	number of pages to verify
  * @oob_buf:	out of band data buffer
  * @oobsel:	out of band selecttion structre
@@ -2293,8 +2313,8 @@ static void nand_resume(struct mtd_info *mtd)
 	if (this->state == FL_PM_SUSPENDED)
 		nand_release_device(mtd);
 	else
-		printk(KERN_ERR "resume() called for the chip which is not in suspended state\n");
-
+		printk(KERN_ERR "nand_resume() called for a chip which is not "
+		       "in suspended state\n");
 }
 
 /*
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index 05c6ecc07036..014ceefbec0e 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -11,47 +11,11 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- *  Info:
- *   Contains standard defines and IDs for NAND flash devices
+ * Info:
+ *	Contains standard defines and IDs for NAND flash devices
  *
- *  Changelog:
- *   01-31-2000 DMW     Created
- *   09-18-2000 SJH     Moved structure out of the Disk-On-Chip drivers
- *			so it can be used by other NAND flash device
- *			drivers. I also changed the copyright since none
- *			of the original contents of this file are specific
- *			to DoC devices. David can whack me with a baseball
- *			bat later if I did something naughty.
- *   10-11-2000 SJH     Added private NAND flash structure for driver
- *   10-24-2000 SJH     Added prototype for 'nand_scan' function
- *   10-29-2001 TG	changed nand_chip structure to support
- *			hardwarespecific function for accessing control lines
- *   02-21-2002 TG	added support for different read/write adress and
- *			ready/busy line access function
- *   02-26-2002 TG	added chip_delay to nand_chip structure to optimize
- *			command delay times for different chips
- *   04-28-2002 TG	OOB config defines moved from nand.c to avoid duplicate
- *			defines in jffs2/wbuf.c
- *   08-07-2002 TG	forced bad block location to byte 5 of OOB, even if
- *			CONFIG_MTD_NAND_ECC_JFFS2 is not set
- *   08-10-2002 TG	extensions to nand_chip structure to support HW-ECC
- *
- *   08-29-2002 tglx 	nand_chip structure: data_poi for selecting
- *			internal / fs-driver buffer
- *			support for 6byte/512byte hardware ECC
- *			read_ecc, write_ecc extended for different oob-layout
- *			oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB,
- *			NAND_YAFFS_OOB
- *  11-25-2002 tglx	Added Manufacturer code FUJITSU, NATIONAL
- *			Split manufacturer and device ID structures
- *
- *  02-08-2004 tglx 	added option field to nand structure for chip anomalities
- *  05-25-2004 tglx 	added bad block table support, ST-MICRO manufacturer id
- *			update of nand_chip structure description
- *  01-17-2005 dmarlin	added extended commands for AG-AND device and added option
- * 			for BBT_AUTO_REFRESH.
- *  01-20-2005 dmarlin	added optional pointer to hardware specific callback for
- *			extra error status checks.
+ * Changelog:
+ *	See git changelog.
  */
 #ifndef __LINUX_MTD_NAND_H
 #define __LINUX_MTD_NAND_H
@@ -68,7 +32,8 @@ extern int nand_scan (struct mtd_info *mtd, int max_chips);
 extern void nand_release (struct mtd_info *mtd);
 
 /* Read raw data from the device without ECC */
-extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen);
+extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from,
+			  size_t len, size_t ooblen);
 
 
 /* The maximum number of NAND chips in an array */
@@ -84,7 +49,7 @@ extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_
  * Constants for hardware specific CLE/ALE/NCE function
 */
 /* Select the chip by setting nCE to low */
-#define NAND_CTL_SETNCE 	1
+#define NAND_CTL_SETNCE		1
 /* Deselect the chip by setting nCE to high */
 #define NAND_CTL_CLRNCE		2
 /* Select the command latch by setting CLE to high */
@@ -285,19 +250,19 @@ struct nand_hw_control {
  *			is read from the chip status register
  * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing commands to the chip
  * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on ready
- * @calculate_ecc: 	[REPLACEABLE] function for ecc calculation or readback from ecc hardware
+ * @calculate_ecc:	[REPLACEABLE] function for ecc calculation or readback from ecc hardware
  * @correct_data:	[REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw)
  * @enable_hwecc:	[BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only
  *			be provided if a hardware ECC is available
  * @erase_cmd:		[INTERN] erase command write function, selectable due to AND support
  * @scan_bbt:		[REPLACEABLE] function to scan bad block table
  * @eccmode:		[BOARDSPECIFIC] mode of ecc, see defines
- * @eccsize: 		[INTERN] databytes used per ecc-calculation
- * @eccbytes: 		[INTERN] number of ecc bytes per ecc-calculation step
+ * @eccsize:		[INTERN] databytes used per ecc-calculation
+ * @eccbytes:		[INTERN] number of ecc bytes per ecc-calculation step
  * @eccsteps:		[INTERN] number of ecc calculation steps per page
  * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR)
  * @wq:			[INTERN] wait queue to sleep on if a NAND operation is in progress
- * @state: 		[INTERN] the current state of the NAND device
+ * @state:		[INTERN] the current state of the NAND device
  * @page_shift:		[INTERN] number of address bits in a page (column address bits)
  * @phys_erase_shift:	[INTERN] number of address bits in a physical eraseblock
  * @bbt_erase_shift:	[INTERN] number of address bits in a bbt entry
@@ -327,7 +292,7 @@ struct nand_hw_control {
 
 struct nand_chip {
 	void  __iomem	*IO_ADDR_R;
-	void  __iomem 	*IO_ADDR_W;
+	void  __iomem	*IO_ADDR_W;
 
 	u_char		(*read_byte)(struct mtd_info *mtd);
 	void		(*write_byte)(struct mtd_info *mtd, u_char byte);
@@ -340,12 +305,12 @@ struct nand_chip {
 	void		(*select_chip)(struct mtd_info *mtd, int chip);
 	int		(*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
 	int		(*block_markbad)(struct mtd_info *mtd, loff_t ofs);
-	void 		(*hwcontrol)(struct mtd_info *mtd, int cmd);
-	int  		(*dev_ready)(struct mtd_info *mtd);
-	void 		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
-	int 		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
+	void		(*hwcontrol)(struct mtd_info *mtd, int cmd);
+	int		(*dev_ready)(struct mtd_info *mtd);
+	void		(*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr);
+	int		(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state);
 	int		(*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
-	int 		(*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+	int		(*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
 	void		(*enable_hwecc)(struct mtd_info *mtd, int mode);
 	void		(*erase_cmd)(struct mtd_info *mtd, int page);
 	int		(*scan_bbt)(struct mtd_info *mtd);
@@ -353,14 +318,14 @@ struct nand_chip {
 	int		eccsize;
 	int		eccbytes;
 	int		eccsteps;
-	int 		chip_delay;
+	int		chip_delay;
 	wait_queue_head_t wq;
-	nand_state_t 	state;
-	int 		page_shift;
+	nand_state_t	state;
+	int		page_shift;
 	int		phys_erase_shift;
 	int		bbt_erase_shift;
 	int		chip_shift;
-	u_char 		*data_buf;
+	u_char		*data_buf;
 	u_char		*oob_buf;
 	int		oobdirty;
 	u_char		*data_poi;
@@ -389,19 +354,19 @@ struct nand_chip {
 #define NAND_MFR_NATIONAL	0x8f
 #define NAND_MFR_RENESAS	0x07
 #define NAND_MFR_STMICRO	0x20
-#define NAND_MFR_HYNIX          0xad
+#define NAND_MFR_HYNIX		0xad
 
 /**
  * struct nand_flash_dev - NAND Flash Device ID Structure
  *
- * @name:  	Identify the device type
- * @id:   	device ID code
- * @pagesize:  	Pagesize in bytes. Either 256 or 512 or 0
+ * @name:	Identify the device type
+ * @id:		device ID code
+ * @pagesize:	Pagesize in bytes. Either 256 or 512 or 0
  *		If the pagesize is 0, then the real pagesize
  *		and the eraseize are determined from the
  *		extended id bytes in the chip
- * @erasesize: 	Size of an erase block in the flash device.
- * @chipsize:  	Total chipsize in Mega Bytes
+ * @erasesize:	Size of an erase block in the flash device.
+ * @chipsize:	Total chipsize in Mega Bytes
  * @options:	Bitfield to store chip relevant options
  */
 struct nand_flash_dev {
@@ -416,7 +381,7 @@ struct nand_flash_dev {
 /**
  * struct nand_manufacturers - NAND Flash Manufacturer ID Structure
  * @name:	Manufacturer name
- * @id: 	manufacturer ID code of device.
+ * @id:		manufacturer ID code of device.
 */
 struct nand_manufacturers {
 	int id;
@@ -456,7 +421,7 @@ struct nand_bbt_descr {
 	int	veroffs;
 	uint8_t	version[NAND_MAX_CHIPS];
 	int	len;
-	int 	maxblocks;
+	int	maxblocks;
 	int	reserved_block_code;
 	uint8_t	*pattern;
 };
@@ -501,8 +466,8 @@ extern int nand_default_bbt (struct mtd_info *mtd);
 extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt);
 extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt);
 extern int nand_do_read_ecc (struct mtd_info *mtd, loff_t from, size_t len,
-                             size_t * retlen, u_char * buf, u_char * oob_buf,
-                             struct nand_oobinfo *oobsel, int flags);
+			     size_t * retlen, u_char * buf, u_char * oob_buf,
+			     struct nand_oobinfo *oobsel, int flags);
 
 /*
 * Constants for oob configuration
@@ -526,7 +491,7 @@ struct platform_nand_chip {
 	int			chip_offset;
 	int			nr_partitions;
 	struct mtd_partition	*partitions;
-	int 			chip_delay;
+	int			chip_delay;
 	unsigned int		options;
 	void			*priv;
 };
@@ -542,8 +507,8 @@ struct platform_nand_chip {
  * All fields are optional and depend on the hardware driver requirements
  */
 struct platform_nand_ctrl {
-	void 		(*hwcontrol)(struct mtd_info *mtd, int cmd);
-	int  		(*dev_ready)(struct mtd_info *mtd);
+	void		(*hwcontrol)(struct mtd_info *mtd, int cmd);
+	int		(*dev_ready)(struct mtd_info *mtd);
 	void		(*select_chip)(struct mtd_info *mtd, int chip);
 	void		*priv;
 };