ASoC: SOF: Add flag and state which will be used for DSP-less mode

The DSPless mode of the ASoC/SOF driver can be used for hardware
verification and debug on platforms with HDaudio codecs. The DSP mode is
still needed on existing platforms for SSP, DMIC, SoundWire interfaces
managed by the GP-DMA.

This mode is also helpful to compare the legacy HDaudio driver with the
ASoC/SOF driver wrt. codec management and handling. In theory we use the
same code but differences are sometimes seen on jack detection and event
handling.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20230404092115.27949-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

3 files changed, 25 insertions, 0 deletions

diff --git a/include/sound/sof.h b/include/sound/sof.h
index 266e66318f9c..d3c41f87ac31 100644
--- a/include/sound/sof.h
+++ b/include/sound/sof.h
@@ -21,6 +21,7 @@ struct snd_sof_dev;
 /**
  * enum sof_fw_state - DSP firmware state definitions
  * @SOF_FW_BOOT_NOT_STARTED:	firmware boot is not yet started
+ * @SOF_DSPLESS_MODE:		DSP is not used
  * @SOF_FW_BOOT_PREPARE:	preparing for boot (firmware loading for exaqmple)
  * @SOF_FW_BOOT_IN_PROGRESS:	firmware boot is in progress
  * @SOF_FW_BOOT_FAILED:		firmware boot failed
@@ -31,6 +32,7 @@ struct snd_sof_dev;
  */
 enum sof_fw_state {
 	SOF_FW_BOOT_NOT_STARTED = 0,
+	SOF_DSPLESS_MODE,
 	SOF_FW_BOOT_PREPARE,
 	SOF_FW_BOOT_IN_PROGRESS,
 	SOF_FW_BOOT_FAILED,
@@ -130,6 +132,9 @@ struct sof_dev_desc {
 	unsigned int ipc_supported_mask;
 	enum sof_ipc_type ipc_default;
 
+	/* The platform supports DSPless mode */
+	bool dspless_mode_supported;
+
 	/* defaults paths for firmware, library and topology files */
 	const char *default_fw_path[SOF_IPC_TYPE_COUNT];
 	const char *default_lib_path[SOF_IPC_TYPE_COUNT];
diff --git a/sound/soc/sof/core.c b/sound/soc/sof/core.c
index 7de8673a01ce..06bcae631612 100644
--- a/sound/soc/sof/core.c
+++ b/sound/soc/sof/core.c
@@ -365,6 +365,15 @@ int snd_sof_device_probe(struct device *dev, struct snd_sof_pdata *plat_data)
 	if (sof_core_debug)
 		dev_info(dev, "sof_debug value: %#x\n", sof_core_debug);
 
+	if (sof_debug_check_flag(SOF_DBG_DSPLESS_MODE)) {
+		if (plat_data->desc->dspless_mode_supported) {
+			dev_info(dev, "Switching to DSPless mode\n");
+			sdev->dspless_mode_selected = true;
+		} else {
+			dev_info(dev, "DSPless mode is not supported by the platform\n");
+		}
+	}
+
 	/* check IPC support */
 	if (!(BIT(plat_data->ipc_type) & plat_data->desc->ipc_supported_mask)) {
 		dev_err(dev, "ipc_type %d is not supported on this platform, mask is %#x\n",
diff --git a/sound/soc/sof/sof-priv.h b/sound/soc/sof/sof-priv.h
index 5f919162a555..1170989bea57 100644
--- a/sound/soc/sof/sof-priv.h
+++ b/sound/soc/sof/sof-priv.h
@@ -48,6 +48,7 @@ struct snd_sof_pcm_stream;
 #define SOF_DBG_FORCE_NOCODEC			BIT(10) /* ignore all codec-related
 							 * configurations
 							 */
+#define SOF_DBG_DSPLESS_MODE			BIT(15) /* Do not initialize and use the DSP */
 
 /* Flag definitions used for controlling the DSP dump behavior */
 #define SOF_DBG_DUMP_REGS		BIT(0)
@@ -528,6 +529,16 @@ struct snd_sof_dev {
 	spinlock_t ipc_lock;	/* lock for IPC users */
 	spinlock_t hw_lock;	/* lock for HW IO access */
 
+	/*
+	 * When true the DSP is not used.
+	 * It is set under the following condition:
+	 * User sets the SOF_DBG_DSPLESS_MODE flag in sof_debug module parameter
+	 * and
+	 * the platform advertises that it can support such mode
+	 * pdata->desc->dspless_mode_supported is true.
+	 */
+	bool dspless_mode_selected;
+
 	/* Main, Base firmware image */
 	struct sof_firmware basefw;