diff options
| author | Linus Torvalds | 2010-10-21 14:37:00 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2010-10-21 14:37:00 -0700 |
| commit | 70ada77920723fbc2b35e9b301022fb1e166b41b (patch) | |
| tree | f30f24135eff89020d8ae21d6c7a83cf5c812585 | |
| parent | b22793f7fdc38d73c4bb4299a313deef56dcfe66 (diff) | |
| parent | 2764c500be0c1f057349ee6c81557239de060f87 (diff) | |
Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (53 commits)
spi/omap2_mcspi: Verify TX reg is empty after TX only xfer with DMA
spi/omap2_mcspi: disable channel after TX_ONLY transfer in PIO mode
spi/bfin_spi: namespace local structs
spi/bfin_spi: init early
spi/bfin_spi: check per-transfer bits_per_word
spi/bfin_spi: warn when CS is driven by hardware (CPHA=0)
spi/bfin_spi: cs should be always low when a new transfer begins
spi/bfin_spi: fix typo in comment
spi/bfin_spi: reject unsupported SPI modes
spi/bfin_spi: use dma_disable_irq_nosync() in irq handler
spi/bfin_spi: combine duplicate SPI_CTL read/write logic
spi/bfin_spi: reset ctl_reg bits when setup is run again on a device
spi/bfin_spi: push all size checks into the transfer function
spi/bfin_spi: use nosync when disabling the IRQ from the IRQ handler
spi/bfin_spi: sync hardware state before reprogramming everything
spi/bfin_spi: save/restore state when suspending/resuming
spi/bfin_spi: redo GPIO CS handling
Blackfin: SPI: expand SPI bitmasks
spi/bfin_spi: use the SPI namespaced bit names
spi/bfin_spi: drop extra memory we don't need
...
24 files changed, 3842 insertions, 1232 deletions
diff --git a/Documentation/powerpc/dts-bindings/fsl/spi.txt b/Documentation/powerpc/dts-bindings/fsl/spi.txt index 80510c018eea..777abd7399d5 100644 --- a/Documentation/powerpc/dts-bindings/fsl/spi.txt +++ b/Documentation/powerpc/dts-bindings/fsl/spi.txt @@ -1,7 +1,9 @@ * SPI (Serial Peripheral Interface) Required properties: -- cell-index : SPI controller index. +- cell-index : QE SPI subblock index. + 0: QE subblock SPI1 + 1: QE subblock SPI2 - compatible : should be "fsl,spi". - mode : the SPI operation mode, it can be "cpu" or "cpu-qe". - reg : Offset and length of the register set for the device @@ -29,3 +31,23 @@ Example: gpios = <&gpio 18 1 // device reg=<0> &gpio 19 1>; // device reg=<1> }; + + +* eSPI (Enhanced Serial Peripheral Interface) + +Required properties: +- compatible : should be "fsl,mpc8536-espi". +- reg : Offset and length of the register set for the device. +- interrupts : should contain eSPI interrupt, the device has one interrupt. +- fsl,espi-num-chipselects : the number of the chipselect signals. + +Example: + spi@110000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x110000 0x1000>; + interrupts = <53 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + }; diff --git a/arch/arm/mach-lpc32xx/phy3250.c b/arch/arm/mach-lpc32xx/phy3250.c index bc9a42da2145..0c936cf5675a 100644 --- a/arch/arm/mach-lpc32xx/phy3250.c +++ b/arch/arm/mach-lpc32xx/phy3250.c @@ -172,18 +172,12 @@ static void phy3250_spi_cs_set(u32 control) } static struct pl022_config_chip spi0_chip_info = { - .lbm = LOOPBACK_DISABLED, .com_mode = INTERRUPT_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, .hierarchy = SSP_MASTER, .slave_tx_disable = 0, - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_FIRST_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_8, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -239,6 +233,7 @@ static int __init phy3250_spi_board_register(void) .max_speed_hz = 5000000, .bus_num = 0, .chip_select = 0, + .mode = SPI_MODE_0, .platform_data = &eeprom, .controller_data = &spi0_chip_info, }, diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 5f55012b7c9e..03f793612594 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -46,7 +46,6 @@ static ssize_t dummy_looptest(struct device *dev, * struct, this is just used here to alter the behaviour of the chip * in order to perform tests. */ - struct pl022_config_chip *chip_info = spi->controller_data; int status; u8 txbuf[14] = {0xDE, 0xAD, 0xBE, 0xEF, 0x2B, 0xAD, 0xCA, 0xFE, 0xBA, 0xBE, 0xB1, 0x05, @@ -72,7 +71,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 8 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_8; + spi->bits_per_word = 8; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); @@ -159,7 +158,7 @@ static ssize_t dummy_looptest(struct device *dev, * Force chip to 16 bit mode * WARNING: NEVER DO THIS IN REAL DRIVER CODE, THIS SHOULD BE STATIC! */ - chip_info->data_size = SSP_DATA_BITS_16; + spi->bits_per_word = 16; /* You should NOT DO THIS EITHER */ spi->master->setup(spi); diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index f0e887bea30e..edb2c0d255c2 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -30,8 +30,6 @@ static void select_dummy_chip(u32 chipselect) } struct pl022_config_chip dummy_chip_info = { - /* Nominally this is LOOPBACK_DISABLED, but this is our dummy chip! */ - .lbm = LOOPBACK_ENABLED, /* * available POLLING_TRANSFER and INTERRUPT_TRANSFER, * DMA_TRANSFER does not work @@ -42,14 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - /* LSB first */ - .endian_tx = SSP_TX_LSB, - .endian_rx = SSP_RX_LSB, - .data_size = SSP_DATA_BITS_8, /* used to be 12 in some default */ .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_SECOND_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_LOW, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, @@ -75,7 +67,7 @@ static struct spi_board_info u300_spi_devices[] = { .bus_num = 0, /* Only one bus on this chip */ .chip_select = 0, /* Means SPI_CS_HIGH, change if e.g low CS */ - .mode = 0, + .mode = SPI_MODE_1 | SPI_LSB_FIRST | SPI_LOOP, }, #endif }; diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 0e8fd135a57d..219ae0ca4eef 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -55,19 +55,13 @@ static void ab4500_spi_cs_control(u32 command) } struct pl022_config_chip ab4500_chip_info = { - .lbm = LOOPBACK_DISABLED, .com_mode = INTERRUPT_TRANSFER, .iface = SSP_INTERFACE_MOTOROLA_SPI, /* we can act as master only */ .hierarchy = SSP_MASTER, .slave_tx_disable = 0, - .endian_rx = SSP_RX_MSB, - .endian_tx = SSP_TX_MSB, - .data_size = SSP_DATA_BITS_24, .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, - .clk_phase = SSP_CLK_SECOND_EDGE, - .clk_pol = SSP_CLK_POL_IDLE_HIGH, .cs_control = ab4500_spi_cs_control, }; @@ -83,7 +77,7 @@ static struct spi_board_info u8500_spi_devices[] = { .max_speed_hz = 12000000, .bus_num = 0, .chip_select = 0, - .mode = SPI_MODE_0, + .mode = SPI_MODE_3, .irq = IRQ_DB8500_AB8500, }, }; diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index e5aba8f95b79..b226f7405e6b 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -32,6 +32,8 @@ struct s3c64xx_spi_csinfo { * struct s3c64xx_spi_info - SPI Controller defining structure * @src_clk_nr: Clock source index for the CLK_CFG[SPI_CLKSEL] field. * @src_clk_name: Platform name of the corresponding clock. + * @clk_from_cmu: If the SPI clock/prescalar control block is present + * by the platform's clock-management-unit and not in SPI controller. * @num_cs: Number of CS this controller emulates. * @cfg_gpio: Configure pins for this SPI controller. * @fifo_lvl_mask: All tx fifo_lvl fields start at offset-6 @@ -41,6 +43,7 @@ struct s3c64xx_spi_csinfo { struct s3c64xx_spi_info { int src_clk_nr; char *src_clk_name; + bool clk_from_cmu; int num_cs; diff --git a/arch/blackfin/include/asm/bfin5xx_spi.h b/arch/blackfin/include/asm/bfin5xx_spi.h index ed4f8c6db0cd..4223cf08ce83 100644 --- a/arch/blackfin/include/asm/bfin5xx_spi.h +++ b/arch/blackfin/include/asm/bfin5xx_spi.h @@ -11,26 +11,17 @@ #define MIN_SPI_BAUD_VAL 2 -#define SPI_READ 0 -#define SPI_WRITE 1 - -#define SPI_CTRL_OFF 0x0 -#define SPI_FLAG_OFF 0x4 -#define SPI_STAT_OFF 0x8 -#define SPI_TXBUFF_OFF 0xc -#define SPI_RXBUFF_OFF 0x10 -#define SPI_BAUD_OFF 0x14 -#define SPI_SHAW_OFF 0x18 - - #define BIT_CTL_ENABLE 0x4000 #define BIT_CTL_OPENDRAIN 0x2000 #define BIT_CTL_MASTER 0x1000 -#define BIT_CTL_POLAR 0x0800 -#define BIT_CTL_PHASE 0x0400 -#define BIT_CTL_BITORDER 0x0200 +#define BIT_CTL_CPOL 0x0800 +#define BIT_CTL_CPHA 0x0400 +#define BIT_CTL_LSBF 0x0200 #define BIT_CTL_WORDSIZE 0x0100 -#define BIT_CTL_MISOENABLE 0x0020 +#define BIT_CTL_EMISO 0x0020 +#define BIT_CTL_PSSE 0x0010 +#define BIT_CTL_GM 0x0008 +#define BIT_CTL_SZ 0x0004 #define BIT_CTL_RXMOD 0x0000 #define BIT_CTL_TXMOD 0x0001 #define BIT_CTL_TIMOD_DMA_TX 0x0003 @@ -50,61 +41,7 @@ #define BIT_STU_SENDOVER 0x0001 #define BIT_STU_RECVFULL 0x0020 -#define CFG_SPI_ENABLE 1 -#define CFG_SPI_DISABLE 0 - -#define CFG_SPI_OUTENABLE 1 -#define CFG_SPI_OUTDISABLE 0 - -#define CFG_SPI_ACTLOW 1 -#define CFG_SPI_ACTHIGH 0 - -#define CFG_SPI_PHASESTART 1 -#define CFG_SPI_PHASEMID 0 - -#define CFG_SPI_MASTER 1 -#define CFG_SPI_SLAVE 0 - -#define CFG_SPI_SENELAST 0 -#define CFG_SPI_SENDZERO 1 - -#define CFG_SPI_RCVFLUSH 1 -#define CFG_SPI_RCVDISCARD 0 - -#define CFG_SPI_LSBFIRST 1 -#define CFG_SPI_MSBFIRST 0 - -#define CFG_SPI_WORDSIZE16 1 -#define CFG_SPI_WORDSIZE8 0 - -#define CFG_SPI_MISOENABLE 1 -#define CFG_SPI_MISODISABLE 0 - -#define CFG_SPI_READ 0x00 -#define CFG_SPI_WRITE 0x01 -#define CFG_SPI_DMAREAD 0x02 -#define CFG_SPI_DMAWRITE 0x03 - -#define CFG_SPI_CSCLEARALL 0 -#define CFG_SPI_CHIPSEL1 1 -#define CFG_SPI_CHIPSEL2 2 -#define CFG_SPI_CHIPSEL3 3 -#define CFG_SPI_CHIPSEL4 4 -#define CFG_SPI_CHIPSEL5 5 -#define CFG_SPI_CHIPSEL6 6 -#define CFG_SPI_CHIPSEL7 7 - -#define CFG_SPI_CS1VALUE 1 -#define CFG_SPI_CS2VALUE 2 -#define CFG_SPI_CS3VALUE 3 -#define CFG_SPI_CS4VALUE 4 -#define CFG_SPI_CS5VALUE 5 -#define CFG_SPI_CS6VALUE 6 -#define CFG_SPI_CS7VALUE 7 - -#define CMD_SPI_SET_BAUDRATE 2 -#define CMD_SPI_GET_SYSTEMCLOCK 25 -#define CMD_SPI_SET_WRITECONTINUOUS 26 +#define MAX_CTRL_CS 8 /* cs in spi controller */ /* device.platform_data for SSP controller devices */ struct bfin5xx_spi_master { @@ -120,9 +57,7 @@ struct bfin5xx_spi_chip { u16 ctl_reg; u8 enable_dma; u8 bits_per_word; - u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require 16-bit delays */ - u32 cs_gpio; /* Value to send if no TX value is supplied, usually 0x0 or 0xFFFF */ u16 idle_tx_val; u8 pio_interrupt; /* Enable spi data irq */ diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 815cebb2e3e5..a75c10eed269 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -108,6 +108,58 @@ }; }; + spi@7000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8536-espi"; + reg = <0x7000 0x1000>; + interrupts = <59 0x2>; + interrupt-parent = <&mpic>; + fsl,espi-num-chipselects = <4>; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; + partition@u-boot { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@kernel { + label = "kernel"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@dtb { + label = "dtb"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@fs { + label = "file system"; + reg = <0x00700000 0x00900000>; + }; + }; + flash@1 { + compatible = "spansion,s25sl12801"; + reg = <1>; + spi-max-frequency = <40000000>; + }; + flash@2 { + compatible = "spansion,s25sl12801"; + reg = <2>; + spi-max-frequency = <40000000>; + }; + flash@3 { + compatible = "spansion,s25sl12801"; + reg = <3>; + spi-max-frequency = <40000000>; + }; + }; + dma@21300 { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/powerpc/boot/dts/p4080ds.dts b/arch/powerpc/boot/dts/p4080ds.dts index 2f0de24e3822..5b7fc29dd6cf 100644 --- a/arch/powerpc/boot/dts/p4080ds.dts +++ b/arch/powerpc/boot/dts/p4080ds.dts @@ -236,22 +236,19 @@ }; spi@110000 { - cell-index = <0>; #address-cells = <1>; #size-cells = <0>; - compatible = "fsl,espi"; + compatible = "fsl,p4080-espi", "fsl,mpc8536-espi"; reg = <0x110000 0x1000>; interrupts = <53 0x2>; interrupt-parent = <&mpic>; - espi,num-ss-bits = <4>; - mode = "cpu"; + fsl,espi-num-chipselects = <4>; - fsl_m25p80@0 { + flash@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,espi-flash"; + compatible = "spansion,s25sl12801"; reg = <0>; - linux,modalias = "fsl_m25p80"; spi-max-frequency = <40000000>; /* input clock */ partition@u-boot { label = "u-boot"; diff --git a/drivers/mfd/ab8500-spi.c b/drivers/mfd/ab8500-spi.c index e1c8b62b086d..01b6d584442c 100644 --- a/drivers/mfd/ab8500-spi.c +++ b/drivers/mfd/ab8500-spi.c @@ -83,6 +83,11 @@ static int __devinit ab8500_spi_probe(struct spi_device *spi) struct ab8500 *ab8500; int ret; + spi->bits_per_word = 24; + ret = spi_setup(spi); + if (ret < 0) + return ret; + ab8500 = kzalloc(sizeof *ab8500, GFP_KERNEL); if (!ab8500) return -ENOMEM; diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 91c2f4f3af10..9949c252c23d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -182,12 +182,27 @@ config SPI_MPC512x_PSC This enables using the Freescale MPC5121 Programmable Serial Controller in SPI master mode. -config SPI_MPC8xxx - tristate "Freescale MPC8xxx SPI controller" +config SPI_FSL_LIB + tristate depends on FSL_SOC + +config SPI_FSL_SPI + tristate "Freescale SPI controller" + depends on FSL_SOC + select SPI_FSL_LIB help - This enables using the Freescale MPC8xxx SPI controllers in master - mode. + This enables using the Freescale SPI controllers in master mode. + MPC83xx platform uses the controller in cpu mode or CPM/QE mode. + MPC8569 uses the controller in QE mode, MPC8610 in cpu mode. + +config SPI_FSL_ESPI + tristate "Freescale eSPI controller" + depends on FSL_SOC + select SPI_FSL_LIB + help + This enables using the Freescale eSPI controllers in master mode. + From MPC8536, 85xx platform uses the controller, and all P10xx, + P20xx, P30xx,P40xx, P50xx uses this controller. config SPI_OMAP_UWIRE tristate "OMAP1 MicroWire" @@ -298,6 +313,13 @@ config SPI_STMP3XXX help SPI driver for Freescale STMP37xx/378x SoC SSP interface +config SPI_TOPCLIFF_PCH + tristate "Topcliff PCH SPI Controller" + depends on PCI + help + SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus + used in some x86 embedded processors. + config SPI_TXX9 tristate "Toshiba TXx9 SPI controller" depends on GENERIC_GPIO && CPU_TX49XX diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index e9cbd18217a0..557aaadf56b2 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -2,9 +2,7 @@ # Makefile for kernel SPI drivers. # -ifeq ($(CONFIG_SPI_DEBUG),y) -EXTRA_CFLAGS += -DDEBUG -endif +ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG # small core, mostly translating board-specific # config declarations into driver model code @@ -34,11 +32,14 @@ obj-$(CONFIG_SPI_PL022) += amba-pl022.o obj-$(CONFIG_SPI_MPC512x_PSC) += mpc512x_psc_spi.o obj-$(CONFIG_SPI_MPC52xx_PSC) += mpc52xx_psc_spi.o obj-$(CONFIG_SPI_MPC52xx) += mpc52xx_spi.o -obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o +obj-$(CONFIG_SPI_FSL_LIB) += spi_fsl_lib.o +obj-$(CONFIG_SPI_FSL_ESPI) += spi_fsl_espi.o +obj-$(CONFIG_SPI_FSL_SPI) += spi_fsl_spi.o obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o +obj-$(CONFIG_SPI_TOPCLIFF_PCH) += spi_topcliff_pch.o obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c index 4c37c4e28647..fb3d1b31772d 100644 --- a/drivers/spi/amba-pl022.c +++ b/drivers/spi/amba-pl022.c @@ -27,7 +27,6 @@ /* * TODO: * - add timeout on polled transfers - * - add generic DMA framework support */ #include <linux/init.h> @@ -45,6 +44,9 @@ #include <linux/amba/pl022.h> #include <linux/io.h> #include <linux/slab.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/scatterlist.h> /* * This macro is used to define some register default values. @@ -381,6 +383,14 @@ struct pl022 { enum ssp_reading read; enum ssp_writing write; u32 exp_fifo_level; + /* DMA settings */ +#ifdef CONFIG_DMA_ENGINE + struct dma_chan *dma_rx_channel; + struct dma_chan *dma_tx_channel; + struct sg_table sgt_rx; + struct sg_table sgt_tx; + char *dummypage; +#endif }; /** @@ -406,7 +416,7 @@ struct chip_data { u16 dmacr; u16 cpsr; u8 n_bytes; - u8 enable_dma:1; + bool enable_dma; enum ssp_reading read; enum ssp_writing write; void (*cs_control) (u32 command); @@ -763,6 +773,371 @@ static void *next_transfer(struct pl022 *pl022) } return STATE_DONE; } + +/* + * This DMA functionality is only compiled in if we have + * access to the generic DMA devices/DMA engine. + */ +#ifdef CONFIG_DMA_ENGINE +static void unmap_free_dma_scatter(struct pl022 *pl022) +{ + /* Unmap and free the SG tables */ + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + sg_free_table(&pl022->sgt_rx); + sg_free_table(&pl022->sgt_tx); +} + +static void dma_callback(void *data) +{ + struct pl022 *pl022 = data; + struct spi_message *msg = pl022->cur_msg; + + BUG_ON(!pl022->sgt_rx.sgl); + +#ifdef VERBOSE_DEBUG + /* + * Optionally dump out buffers to inspect contents, this is + * good if you want to convince yourself that the loopback + * read/write contents are the same, when adopting to a new + * DMA engine. + */ + { + struct scatterlist *sg; + unsigned int i; + + dma_sync_sg_for_cpu(&pl022->adev->dev, + pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, + DMA_FROM_DEVICE); + + for_each_sg(pl022->sgt_rx.sgl, sg, pl022->sgt_rx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI RX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI RX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + for_each_sg(pl022->sgt_tx.sgl, sg, pl022->sgt_tx.nents, i) { + dev_dbg(&pl022->adev->dev, "SPI TX SG ENTRY: %d", i); + print_hex_dump(KERN_ERR, "SPI TX: ", + DUMP_PREFIX_OFFSET, + 16, + 1, + sg_virt(sg), + sg_dma_len(sg), + 1); + } + } +#endif + + unmap_free_dma_scatter(pl022); + + /* Update total bytes transfered */ + msg->actual_length += pl022->cur_transfer->len; + if (pl022->cur_transfer->cs_change) + pl022->cur_chip-> + cs_control(SSP_CHIP_DESELECT); + + /* Move to next transfer */ + msg->state = next_transfer(pl022); + tasklet_schedule(&pl022->pump_transfers); +} + +static void setup_dma_scatter(struct pl022 *pl022, + void *buffer, + unsigned int length, + struct sg_table *sgtab) +{ + struct scatterlist *sg; + int bytesleft = length; + void *bufp = buffer; + int mapbytes; + int i; + + if (buffer) { + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + /* + * If there are less bytes left than what fits + * in the current page (plus page alignment offset) + * we just feed in this, else we stuff in as much + * as we can. + */ + if (bytesleft < (PAGE_SIZE - offset_in_page(bufp))) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE - offset_in_page(bufp); + sg_set_page(sg, virt_to_page(bufp), + mapbytes, offset_in_page(bufp)); + bufp += mapbytes; + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX target page @ %p, %d bytes, %d left\n", + bufp, mapbytes, bytesleft); + } + } else { + /* Map the dummy buffer on every page */ + for_each_sg(sgtab->sgl, sg, sgtab->nents, i) { + if (bytesleft < PAGE_SIZE) + mapbytes = bytesleft; + else + mapbytes = PAGE_SIZE; + sg_set_page(sg, virt_to_page(pl022->dummypage), + mapbytes, 0); + bytesleft -= mapbytes; + dev_dbg(&pl022->adev->dev, + "set RX/TX to dummy page %d bytes, %d left\n", + mapbytes, bytesleft); + + } + } + BUG_ON(bytesleft); +} + +/** + * configure_dma - configures the channels for the next transfer + * @pl022: SSP driver's private data structure + */ +static int configure_dma(struct pl022 *pl022) +{ + struct dma_slave_config rx_conf = { + .src_addr = SSP_DR(pl022->phybase), + .direction = DMA_FROM_DEVICE, + .src_maxburst = pl022->vendor->fifodepth >> 1, + }; + struct dma_slave_config tx_conf = { + .dst_addr = SSP_DR(pl022->phybase), + .direction = DMA_TO_DEVICE, + .dst_maxburst = pl022->vendor->fifodepth >> 1, + }; + unsigned int pages; + int ret; + int sglen; + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + struct dma_async_tx_descriptor *rxdesc; + struct dma_async_tx_descriptor *txdesc; + dma_cookie_t cookie; + + /* Check that the channels are available */ + if (!rxchan || !txchan) + return -ENODEV; + + switch (pl022->read) { + case READING_NULL: + /* Use the same as for writing */ + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case READING_U8: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case READING_U16: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case READING_U32: + rx_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + break; + } + + switch (pl022->write) { + case WRITING_NULL: + /* Use the same as for reading */ + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_UNDEFINED; + break; + case WRITING_U8: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + break; + case WRITING_U16: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; + break; + case WRITING_U32: + tx_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;; + break; + } + + /* SPI pecularity: we need to read and write the same width */ + if (rx_conf.src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + rx_conf.src_addr_width = tx_conf.dst_addr_width; + if (tx_conf.dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) + tx_conf.dst_addr_width = rx_conf.src_addr_width; + BUG_ON(rx_conf.src_addr_width != tx_conf.dst_addr_width); + + rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG, + (unsigned long) &rx_conf); + txchan->device->device_control(txchan, DMA_SLAVE_CONFIG, + (unsigned long) &tx_conf); + + /* Create sglists for the transfers */ + pages = (pl022->cur_transfer->len >> PAGE_SHIFT) + 1; + dev_dbg(&pl022->adev->dev, "using %d pages for transfer\n", pages); + + ret = sg_alloc_table(&pl022->sgt_rx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_rx_sg; + + ret = sg_alloc_table(&pl022->sgt_tx, pages, GFP_KERNEL); + if (ret) + goto err_alloc_tx_sg; + + /* Fill in the scatterlists for the RX+TX buffers */ + setup_dma_scatter(pl022, pl022->rx, + pl022->cur_transfer->len, &pl022->sgt_rx); + setup_dma_scatter(pl022, pl022->tx, + pl022->cur_transfer->len, &pl022->sgt_tx); + + /* Map DMA buffers */ + sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, DMA_FROM_DEVICE); + if (!sglen) + goto err_rx_sgmap; + + sglen = dma_map_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); + if (!sglen) + goto err_tx_sgmap; + + /* Send both scatterlists */ + rxdesc = rxchan->device->device_prep_slave_sg(rxchan, + pl022->sgt_rx.sgl, + pl022->sgt_rx.nents, + DMA_FROM_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!rxdesc) + goto err_rxdesc; + + txdesc = txchan->device->device_prep_slave_sg(txchan, + pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, + DMA_TO_DEVICE, + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); + if (!txdesc) + goto err_txdesc; + + /* Put the callback on the RX transfer only, that should finish last */ + rxdesc->callback = dma_callback; + rxdesc->callback_param = pl022; + + /* Submit and fire RX and TX with TX last so we're ready to read! */ + cookie = rxdesc->tx_submit(rxdesc); + if (dma_submit_error(cookie)) + goto err_submit_rx; + cookie = txdesc->tx_submit(txdesc); + if (dma_submit_error(cookie)) + goto err_submit_tx; + rxchan->device->device_issue_pending(rxchan); + txchan->device->device_issue_pending(txchan); + + return 0; + +err_submit_tx: +err_submit_rx: +err_txdesc: + txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); +err_rxdesc: + rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_tx.sgl, + pl022->sgt_tx.nents, DMA_TO_DEVICE); +err_tx_sgmap: + dma_unmap_sg(&pl022->adev->dev, pl022->sgt_rx.sgl, + pl022->sgt_tx.nents, DMA_FROM_DEVICE); +err_rx_sgmap: + sg_free_table(&pl022->sgt_tx); +err_alloc_tx_sg: + sg_free_table(&pl022->sgt_rx); +err_alloc_rx_sg: + return -ENOMEM; +} + +static int __init pl022_dma_probe(struct pl022 *pl022) +{ + dma_cap_mask_t mask; + + /* Try to acquire a generic DMA engine slave channel */ + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + /* + * We need both RX and TX channels to do DMA, else do none + * of them. + */ + pl022->dma_rx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_rx_param); + if (!pl022->dma_rx_channel) { + dev_err(&pl022->adev->dev, "no RX DMA channel!\n"); + goto err_no_rxchan; + } + + pl022->dma_tx_channel = dma_request_channel(mask, + pl022->master_info->dma_filter, + pl022->master_info->dma_tx_param); + if (!pl022->dma_tx_channel) { + dev_err(&pl022->adev->dev, "no TX DMA channel!\n"); + goto err_no_txchan; + } + + pl022->dummypage = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!pl022->dummypage) { + dev_err(&pl022->adev->dev, "no DMA dummypage!\n"); + goto err_no_dummypage; + } + + dev_info(&pl022->adev->dev, "setup for DMA on RX %s, TX %s\n", + dma_chan_name(pl022->dma_rx_channel), + dma_chan_name(pl022->dma_tx_channel)); + + return 0; + +err_no_dummypage: + dma_release_channel(pl022->dma_tx_channel); +err_no_txchan: + dma_release_channel(pl022->dma_rx_channel); + pl022->dma_rx_channel = NULL; +err_no_rxchan: + return -ENODEV; +} + +static void terminate_dma(struct pl022 *pl022) +{ + struct dma_chan *rxchan = pl022->dma_rx_channel; + struct dma_chan *txchan = pl022->dma_tx_channel; + + rxchan->device->device_control(rxchan, DMA_TERMINATE_ALL, 0); + txchan->device->device_control(txchan, DMA_TERMINATE_ALL, 0); + unmap_free_dma_scatter(pl022); +} + +static void pl022_dma_remove(struct pl022 *pl022) +{ + if (pl022->busy) + terminate_dma(pl022); + if (pl022->dma_tx_channel) + dma_release_channel(pl022->dma_tx_channel); + if (pl022->dma_rx_channel) + dma_release_channel(pl022->dma_rx_channel); + kfree(pl022->dummypage); +} + +#else +static inline int configure_dma(struct pl022 *pl022) +{ + return -ENODEV; +} + +static inline int pl022_dma_probe(struct pl022 *pl022) +{ + return 0; +} + +static inline void pl022_dma_remove(struct pl022 *pl022) +{ +} +#endif + /** * pl022_interrupt_handler - Interrupt handler for SSP controller * @@ -794,14 +1169,17 @@ static irqreturn_t pl022_interrupt_handler(int irq, void *dev_id) if (unlikely(!irq_status)) return IRQ_NONE; - /* This handles the error code interrupts */ + /* + * This handles the FIFO interrupts, the timeout + * interrupts are flatly ignored, they cannot be + * trusted. + */ if (unlikely(irq_status & SSP_MIS_MASK_RORMIS)) { /* * Overrun interrupt - bail out since our Data has been * corrupted */ - dev_err(&pl022->adev->dev, - "FIFO overrun\n"); + dev_err(&pl022->adev->dev, "FIFO overrun\n"); if (readw(SSP_SR(pl022->virtbase)) & SSP_SR_MASK_RFF) dev_err(&pl022->adev->dev, "RXFIFO is full\n"); @@ -896,8 +1274,8 @@ static int set_up_next_transfer(struct pl022 *pl022, } /** - * pump_transfers - Tasklet function which schedules next interrupt transfer - * when running in interrupt transfer mode. + * pump_transfers - Tasklet function which schedules next transfer + * when running in interrupt or DMA transfer mode. * @data: SSP driver private data structure * */ @@ -954,65 +1332,23 @@ static void pump_transfers(unsigned long data) } /* Flush the FIFOs and let's go! */ flush(pl022); - writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); -} - -/** - * NOT IMPLEMENTED - * configure_dma - It configures the DMA pipes for DMA transfers - * @data: SSP driver's private data structure - * - */ -static int configure_dma(void *data) -{ - struct pl022 *pl022 = data; - dev_dbg(&pl022->adev->dev, "configure DMA\n"); - return -ENOTSUPP; -} - -/** - * do_dma_transfer - It handles transfers of the current message - * if it is DMA xfer. - * NOT FULLY IMPLEMENTED - * @data: SSP driver's private data structure - */ -static void do_dma_transfer(void *data) -{ - struct pl022 *pl022 = data; - - if (configure_dma(data)) { - dev_dbg(&pl022->adev->dev, "configuration of DMA Failed!\n"); - goto err_config_dma; - } - /* TODO: Implememt DMA setup of pipes here */ - - /* Enable target chip, set up transfer */ - pl022->cur_chip->cs_control(SSP_CHIP_SELECT); - if (set_up_next_transfer(pl022, pl022->cur_transfer)) { - /* Error path */ - pl022->cur_msg->state = STATE_ERROR; - pl022->cur_msg->status = -EIO; - giveback(pl022); + if (pl022->cur_chip->enable_dma) { + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } return; } - /* Enable SSP */ - writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), - SSP_CR1(pl022->virtbase)); - - /* TODO: Enable the DMA transfer here */ - return; - err_config_dma: - pl022->cur_msg->state = STATE_ERROR; - pl022->cur_msg->status = -EIO; - giveback(pl022); - return; +err_config_dma: + writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); } -static void do_interrupt_transfer(void *data) +static void do_interrupt_dma_transfer(struct pl022 *pl022) { - struct pl022 *pl022 = data; + u32 irqflags = ENABLE_ALL_INTERRUPTS; /* Enable target chip */ pl022->cur_chip->cs_control(SSP_CHIP_SELECT); @@ -1023,15 +1359,26 @@ static void do_interrupt_transfer(void *data) giveback(pl022); return; } + /* If we're using DMA, set up DMA here */ + if (pl022->cur_chip->enable_dma) { + /* Configure DMA transfer */ + if (configure_dma(pl022)) { + dev_dbg(&pl022->adev->dev, + "configuration of DMA failed, fall back to interrupt mode\n"); + goto err_config_dma; + } + /* Disable interrupts in DMA mode, IRQ from DMA controller */ + irqflags = DISABLE_ALL_INTERRUPTS; + } +err_config_dma: /* Enable SSP, turn on interrupts */ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); - writew(ENABLE_ALL_INTERRUPTS, SSP_IMSC(pl022->virtbase)); + writew(irqflags, SSP_IMSC(pl022->virtbase)); } -static void do_polling_transfer(void *data) +static void do_polling_transfer(struct pl022 *pl022) { - struct pl022 *pl022 = data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; @@ -1101,7 +1448,7 @@ static void do_polling_transfer(void *data) * * This function checks if there is any spi message in the queue that * needs processing and delegate control to appropriate function - * do_polling_transfer()/do_interrupt_transfer()/do_dma_transfer() + * do_polling_transfer()/do_interrupt_dma_transfer() * based on the kind of the transfer * */ @@ -1150,10 +1497,8 @@ static void pump_messages(struct work_struct *work) if (pl022->cur_chip->xfer_type == POLLING_TRANSFER) do_polling_transfer(pl022); - else if (pl022->cur_chip->xfer_type == INTERRUPT_TRANSFER) - do_interrupt_transfer(pl022); else - do_dma_transfer(pl022); + do_interrupt_dma_transfer(pl022); } @@ -1248,100 +1593,56 @@ static int destroy_queue(struct pl022 *pl022) } static int verify_controller_parameters(struct pl022 *pl022, - struct pl022_config_chip *chip_info) + struct pl022_config_chip const *chip_info) { - if ((chip_info->lbm != LOOPBACK_ENABLED) - && (chip_info->lbm != LOOPBACK_DISABLED)) { - dev_err(chip_info->dev, - "loopback Mode is configured incorrectly\n"); - return -EINVAL; - } if ((chip_info->iface < SSP_INTERFACE_MOTOROLA_SPI) || (chip_info->iface > SSP_INTERFACE_UNIDIRECTIONAL)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "interface is configured incorrectly\n"); return -EINVAL; } if ((chip_info->iface == SSP_INTERFACE_UNIDIRECTIONAL) && (!pl022->vendor->unidir)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "unidirectional mode not supported in this " "hardware version\n"); return -EINVAL; } if ((chip_info->hierarchy != SSP_MASTER) && (chip_info->hierarchy != SSP_SLAVE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "hierarchy is configured incorrectly\n"); return -EINVAL; } - if (((chip_info->clk_freq).cpsdvsr < CPSDVR_MIN) - || ((chip_info->clk_freq).cpsdvsr > CPSDVR_MAX)) { - dev_err(chip_info->dev, - "cpsdvsr is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->endian_rx != SSP_RX_MSB) - && (chip_info->endian_rx != SSP_RX_LSB)) { - dev_err(chip_info->dev, - "RX FIFO endianess is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->endian_tx != SSP_TX_MSB) - && (chip_info->endian_tx != SSP_TX_LSB)) { - dev_err(chip_info->dev, - "TX FIFO endianess is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->data_size < SSP_DATA_BITS_4) - || (chip_info->data_size > SSP_DATA_BITS_32)) { - dev_err(chip_info->dev, - "DATA Size is configured incorrectly\n"); - return -EINVAL; - } if ((chip_info->com_mode != INTERRUPT_TRANSFER) && (chip_info->com_mode != DMA_TRANSFER) && (chip_info->com_mode != POLLING_TRANSFER)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Communication mode is configured incorrectly\n"); return -EINVAL; } if ((chip_info->rx_lev_trig < SSP_RX_1_OR_MORE_ELEM) || (chip_info->rx_lev_trig > SSP_RX_32_OR_MORE_ELEM)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "RX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } if ((chip_info->tx_lev_trig < SSP_TX_1_OR_MORE_EMPTY_LOC) || (chip_info->tx_lev_trig > SSP_TX_32_OR_MORE_EMPTY_LOC)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "TX FIFO Trigger Level is configured incorrectly\n"); return -EINVAL; } - if (chip_info->iface == SSP_INTERFACE_MOTOROLA_SPI) { - if ((chip_info->clk_phase != SSP_CLK_FIRST_EDGE) - && (chip_info->clk_phase != SSP_CLK_SECOND_EDGE)) { - dev_err(chip_info->dev, - "Clock Phase is configured incorrectly\n"); - return -EINVAL; - } - if ((chip_info->clk_pol != SSP_CLK_POL_IDLE_LOW) - && (chip_info->clk_pol != SSP_CLK_POL_IDLE_HIGH)) { - dev_err(chip_info->dev, - "Clock Polarity is configured incorrectly\n"); - return -EINVAL; - } - } if (chip_info->iface == SSP_INTERFACE_NATIONAL_MICROWIRE) { if ((chip_info->ctrl_len < SSP_BITS_4) || (chip_info->ctrl_len > SSP_BITS_32)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "CTRL LEN is configured incorrectly\n"); return -EINVAL; } if ((chip_info->wait_state != SSP_MWIRE_WAIT_ZERO) && (chip_info->wait_state != SSP_MWIRE_WAIT_ONE)) { - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Wait State is configured incorrectly\n"); return -EINVAL; } @@ -1350,24 +1651,20 @@ static int verify_controller_parameters(struct pl022 *pl022, if ((chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) && (chip_info->duplex != - SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) - dev_err(chip_info->dev, + SSP_MICROWIRE_CHANNEL_HALF_DUPLEX)) { + dev_err(&pl022->adev->dev, "Microwire duplex mode is configured incorrectly\n"); return -EINVAL; + } } else { if (chip_info->duplex != SSP_MICROWIRE_CHANNEL_FULL_DUPLEX) - dev_err(chip_info->dev, + dev_err(&pl022->adev->dev, "Microwire half duplex mode requested," " but this is only available in the" " ST version of PL022\n"); return -EINVAL; } } - if (chip_info->cs_control == NULL) { - dev_warn(chip_info->dev, - "Chip Select Function is NULL for this chip\n"); - chip_info->cs_control = null_cs_control; - } return 0; } @@ -1467,22 +1764,24 @@ static int calculate_effective_freq(struct pl022 *pl022, return 0; } -/** - * NOT IMPLEMENTED - * process_dma_info - Processes the DMA info provided by client drivers - * @chip_info: chip info provided by client device - * @chip: Runtime state maintained by the SSP controller for each spi device - * - * This function processes and stores DMA config provided by client driver - * into the runtime state maintained by the SSP controller driver + +/* + * A piece of default chip info unless the platform + * supplies it. */ -static int process_dma_info(struct pl022_config_chip *chip_info, - struct chip_data *chip) -{ - dev_err(chip_info->dev, - "cannot process DMA info, DMA not implemented!\n"); - return -ENOTSUPP; -} +static const struct pl022_config_chip pl022_default_chip_info = { + .com_mode = POLLING_TRANSFER, + .iface = SSP_INTERFACE_MOTOROLA_SPI, + .hierarchy = SSP_SLAVE, + .slave_tx_disable = DO_NOT_DRIVE_TX, + .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .ctrl_len = SSP_BITS_8, + .wait_state = SSP_MWIRE_WAIT_ZERO, + .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, + .cs_control = null_cs_control, +}; + /** * pl022_setup - setup function registered to SPI master framework @@ -1496,23 +1795,15 @@ static int process_dma_info(struct pl022_config_chip *chip_info, * controller hardware here, that is not done until the actual transfer * commence. */ - -/* FIXME: JUST GUESSING the spi->mode bits understood by this driver */ -#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \ - | SPI_LSB_FIRST | SPI_LOOP) - static int pl022_setup(struct spi_device *spi) { - struct pl022_config_chip *chip_info; + struct pl022_config_chip const *chip_info; struct chip_data *chip; + struct ssp_clock_params clk_freq; int status = 0; struct pl022 *pl022 = spi_master_get_devdata(spi->master); - - if (spi->mode & ~MODEBITS) { - dev_dbg(&spi->dev, "unsupported mode bits %x\n", - spi->mode & ~MODEBITS); - return -EINVAL; - } + unsigned int bits = spi->bits_per_word; + u32 tmp; if (!spi->max_speed_hz) return -EINVAL; @@ -1535,48 +1826,13 @@ static int pl022_setup(struct spi_device *spi) chip_info = spi->controller_data; if (chip_info == NULL) { + chip_info = &pl022_default_chip_info; /* spi_board_info.controller_data not is supplied */ dev_dbg(&spi->dev, "using default controller_data settings\n"); - - chip_info = - kzalloc(sizeof(struct pl022_config_chip), GFP_KERNEL); - - if (!chip_info) { - dev_err(&spi->dev, - "cannot allocate controller data\n"); - status = -ENOMEM; - goto err_first_setup; - } - - dev_dbg(&spi->dev, "allocated memory for controller data\n"); - - /* Pointer back to the SPI device */ - chip_info->dev = &spi->dev; - /* - * Set controller data default values: - * Polling is supported by default - */ - chip_info->lbm = LOOPBACK_DISABLED; - chip_info->com_mode = POLLING_TRANSFER; - chip_info->iface = SSP_INTERFACE_MOTOROLA_SPI; - chip_info->hierarchy = SSP_SLAVE; - chip_info->slave_tx_disable = DO_NOT_DRIVE_TX; - chip_info->endian_tx = SSP_TX_LSB; - chip_info->endian_rx = SSP_RX_LSB; - chip_info->data_size = SSP_DATA_BITS_12; - chip_info->rx_lev_trig = SSP_RX_1_OR_MORE_ELEM; - chip_info->tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC; - chip_info->clk_phase = SSP_CLK_SECOND_EDGE; - chip_info->clk_pol = SSP_CLK_POL_IDLE_LOW; - chip_info->ctrl_len = SSP_BITS_8; - chip_info->wait_state = SSP_MWIRE_WAIT_ZERO; - chip_info->duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX; - chip_info->cs_control = null_cs_control; - } else { + } else dev_dbg(&spi->dev, "using user supplied controller_data settings\n"); - } /* * We can override with custom divisors, else we use the board @@ -1586,29 +1842,48 @@ static int pl022_setup(struct spi_device *spi) && (0 == chip_info->clk_freq.scr)) { status = calculate_effective_freq(pl022, spi->max_speed_hz, - &chip_info->clk_freq); + &clk_freq); if (status < 0) goto err_config_params; } else { - if ((chip_info->clk_freq.cpsdvsr % 2) != 0) - chip_info->clk_freq.cpsdvsr = - chip_info->clk_freq.cpsdvsr - 1; + memcpy(&clk_freq, &chip_info->clk_freq, sizeof(clk_freq)); + if ((clk_freq.cpsdvsr % 2) != 0) + clk_freq.cpsdvsr = + clk_freq.cpsdvsr - 1; + } + if ((clk_freq.cpsdvsr < CPSDVR_MIN) + || (clk_freq.cpsdvsr > CPSDVR_MAX)) { + dev_err(&spi->dev, + "cpsdvsr is configured incorrectly\n"); + goto err_config_params; } + + status = verify_controller_parameters(pl022, chip_info); if (status) { dev_err(&spi->dev, "controller data is incorrect"); goto err_config_params; } + /* Now set controller state based on controller data */ chip->xfer_type = chip_info->com_mode; - chip->cs_control = chip_info->cs_control; - - if (chip_info->data_size <= 8) { - dev_dbg(&spi->dev, "1 <= n <=8 bits per word\n"); + if (!chip_info->cs_control) { + chip->cs_control = null_cs_control; + dev_warn(&spi->dev, + "chip select function is NULL for this chip\n"); + } else + chip->cs_control = chip_info->cs_control; + + if (bits <= 3) { + /* PL022 doesn't support less than 4-bits */ + status = -ENOTSUPP; + goto err_config_params; + } else if (bits <= 8) { + dev_dbg(&spi->dev, "4 <= n <=8 bits per word\n"); chip->n_bytes = 1; chip->read = READING_U8; chip->write = WRITING_U8; - } else if (chip_info->data_size <= 16) { + } else if (bits <= 16) { dev_dbg(&spi->dev, "9 <= n <= 16 bits per word\n"); chip->n_bytes = 2; chip->read = READING_U16; @@ -1625,6 +1900,7 @@ static int pl022_setup(struct spi_device *spi) dev_err(&spi->dev, "a standard pl022 can only handle " "1 <= n <= 16 bit words\n"); + status = -ENOTSUPP; goto err_config_params; } } @@ -1636,9 +1912,8 @@ static int pl022_setup(struct spi_device *spi) chip->cpsr = 0; if ((chip_info->com_mode == DMA_TRANSFER) && ((pl022->master_info)->enable_dma)) { - chip->enable_dma = 1; + chip->enable_dma = true; dev_dbg(&spi->dev, "DMA mode set in controller state\n"); - status = process_dma_info(chip_info, chip); if (status < 0) goto err_config_params; SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, @@ -1646,7 +1921,7 @@ static int pl022_setup(struct spi_device *spi) SSP_WRITE_BITS(chip->dmacr, SSP_DMA_ENABLED, SSP_DMACR_MASK_TXDMAE, 1); } else { - chip->enable_dma = 0; + chip->enable_dma = false; dev_dbg(&spi->dev, "DMA mode NOT set in controller state\n"); SSP_WRITE_BITS(chip->dmacr, SSP_DMA_DISABLED, SSP_DMACR_MASK_RXDMAE, 0); @@ -1654,10 +1929,12 @@ static int pl022_setup(struct spi_device *spi) SSP_DMACR_MASK_TXDMAE, 1); } - chip->cpsr = chip_info->clk_freq.cpsdvsr; + chip->cpsr = clk_freq.cpsdvsr; /* Special setup for the ST micro extended control registers */ if (pl022->vendor->extended_cr) { + u32 etx; + if (pl022->vendor->pl023) { /* These bits are only in the PL023 */ SSP_WRITE_BITS(chip->cr1, chip_info->clkdelay, @@ -1673,29 +1950,51 @@ static int pl022_setup(struct spi_device *spi) SSP_WRITE_BITS(chip->cr1, chip_info->wait_state, SSP_CR1_MASK_MWAIT_ST, 6); } - SSP_WRITE_BITS(chip->cr0, chip_info->data_size, + SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS_ST, 0); - SSP_WRITE_BITS(chip->cr1, chip_info->endian_rx, - SSP_CR1_MASK_RENDN_ST, 4); - SSP_WRITE_BITS(chip->cr1, chip_info->endian_tx, - SSP_CR1_MASK_TENDN_ST, 5); + + if (spi->mode & SPI_LSB_FIRST) { + tmp = SSP_RX_LSB; + etx = SSP_TX_LSB; + } else { + tmp = SSP_RX_MSB; + etx = SSP_TX_MSB; + } + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_RENDN_ST, 4); + SSP_WRITE_BITS(chip->cr1, etx, SSP_CR1_MASK_TENDN_ST, 5); SSP_WRITE_BITS(chip->cr1, chip_info->rx_lev_trig, SSP_CR1_MASK_RXIFLSEL_ST, 7); SSP_WRITE_BITS(chip->cr1, chip_info->tx_lev_trig, SSP_CR1_MASK_TXIFLSEL_ST, 10); } else { - SSP_WRITE_BITS(chip->cr0, chip_info->data_size, + SSP_WRITE_BITS(chip->cr0, bits - 1, SSP_CR0_MASK_DSS, 0); SSP_WRITE_BITS(chip->cr0, chip_info->iface, SSP_CR0_MASK_FRF, 4); } + /* Stuff that is common for all versions */ - SSP_WRITE_BITS(chip->cr0, chip_info->clk_pol, SSP_CR0_MASK_SPO, 6); - SSP_WRITE_BITS(chip->cr0, chip_info->clk_phase, SSP_CR0_MASK_SPH, 7); - SSP_WRITE_BITS(chip->cr0, chip_info->clk_freq.scr, SSP_CR0_MASK_SCR, 8); + if (spi->mode & SPI_CPOL) + tmp = SSP_CLK_POL_IDLE_HIGH; + else + tmp = SSP_CLK_POL_IDLE_LOW; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPO, 6); + + if (spi->mode & SPI_CPHA) + tmp = SSP_CLK_SECOND_EDGE; + else + tmp = SSP_CLK_FIRST_EDGE; + SSP_WRITE_BITS(chip->cr0, tmp, SSP_CR0_MASK_SPH, 7); + + SSP_WRITE_BITS(chip->cr0, clk_freq.scr, SSP_CR0_MASK_SCR, 8); /* Loopback is available on all versions except PL023 */ - if (!pl022->vendor->pl023) - SSP_WRITE_BITS(chip->cr1, chip_info->lbm, SSP_CR1_MASK_LBM, 0); + if (!pl022->vendor->pl023) { + if (spi->mode & SPI_LOOP) + tmp = LOOPBACK_ENABLED; + else + tmp = LOOPBACK_DISABLED; + SSP_WRITE_BITS(chip->cr1, tmp, SSP_CR1_MASK_LBM, 0); + } SSP_WRITE_BITS(chip->cr1, SSP_DISABLED, SSP_CR1_MASK_SSE, 1); SSP_WRITE_BITS(chip->cr1, chip_info->hierarchy, SSP_CR1_MASK_MS, 2); SSP_WRITE_BITS(chip->cr1, chip_info->slave_tx_disable, SSP_CR1_MASK_SOD, 3); @@ -1704,7 +2003,7 @@ static int pl022_setup(struct spi_device *spi) spi_set_ctldata(spi, chip); return status; err_config_params: - err_first_setup: + spi_set_ctldata(spi, NULL); kfree(chip); return status; } @@ -1766,12 +2065,21 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) master->setup = pl022_setup; master->transfer = pl022_transfer; + /* + * Supports mode 0-3, loopback, and active low CS. Transfers are + * always MS bit first on the original pl022. + */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LOOP; + if (pl022->vendor->extended_cr) + master->mode_bits |= SPI_LSB_FIRST; + dev_dbg(&adev->dev, "BUSNO: %d\n", master->bus_num); status = amba_request_regions(adev, NULL); if (status) goto err_no_ioregion; + pl022->phybase = adev->res.start; pl022->virtbase = ioremap(adev->res.start, resource_size(&adev->res)); if (pl022->virtbase == NULL) { status = -ENOMEM; @@ -1798,6 +2106,14 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) dev_err(&adev->dev, "probe - cannot get IRQ (%d)\n", status); goto err_no_irq; } + + /* Get DMA channels */ + if (platform_info->enable_dma) { + status = pl022_dma_probe(pl022); + if (status != 0) + goto err_no_dma; + } + /* Initialize and start queue */ status = init_queue(pl022); if (status != 0) { @@ -1826,6 +2142,8 @@ pl022_probe(struct amba_device *adev, struct amba_id *id) err_start_queue: err_init_queue: destroy_queue(pl022); + pl022_dma_remove(pl022); + err_no_dma: free_irq(adev->irq[0], pl022); err_no_irq: clk_put(pl022->clk); @@ -1856,6 +2174,7 @@ pl022_remove(struct amba_device *adev) return status; } load_ssp_default_config(pl022); + pl022_dma_remove(pl022); free_irq(adev->irq[0], pl022); clk_disable(pl022->clk); clk_put(pl022->clk); diff --git a/drivers/spi/atmel_spi.c b/drivers/spi/atmel_spi.c index c4e04428992d..154529aacc03 100644 --- a/drivers/spi/atmel_spi.c +++ b/drivers/spi/atmel_spi.c @@ -654,6 +654,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) struct spi_transfer *xfer; unsigned long flags; struct device *controller = spi->master->dev.parent; + u8 bits; + struct atmel_spi_device *asd; as = spi_master_get_devdata(spi->master); @@ -672,8 +674,18 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg) return -EINVAL; } + if (xfer->bits_per_word) { + asd = spi->controller_state; + bits = (asd->csr >> 4) & 0xf; + if (bits != xfer->bits_per_word - 8) { + dev_dbg(&spi->dev, "you can't yet change " + "bits_per_word in transfers\n"); + return -ENOPROTOOPT; + } + } + /* FIXME implement these protocol options!! */ - if (xfer->bits_per_word || xfer->speed_hz) { + if (xfer->speed_hz) { dev_dbg(&spi->dev, "no protocol options yet\n"); return -ENOPROTOOPT; } diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c index b3a94ca0a75a..2a651e61bfbf 100644 --- a/drivers/spi/omap2_mcspi.c +++ b/drivers/spi/omap2_mcspi.c @@ -296,6 +296,19 @@ static int omap2_mcspi_enable_clocks(struct omap2_mcspi *mcspi) return 0; } +static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) +{ + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(1000); + while (!(__raw_readl(reg) & bit)) { + if (time_after(jiffies, timeout)) + return -1; + cpu_relax(); + } + return 0; +} + static unsigned omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) { @@ -309,11 +322,14 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) u32 l; u8 * rx; const u8 * tx; + void __iomem *chstat_reg; mcspi = spi_master_get_devdata(spi->master); mcspi_dma = &mcspi->dma_channels[spi->chip_select]; l = mcspi_cached_chconf0(spi); + chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0; + count = xfer->len; c = count; word_len = cs->word_len; @@ -382,6 +398,16 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) if (tx != NULL) { wait_for_completion(&mcspi_dma->dma_tx_completion); dma_unmap_single(NULL, xfer->tx_dma, count, DMA_TO_DEVICE); + + /* for TX_ONLY mode, be sure all words have shifted out */ + if (rx == NULL) { + if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_TXS) < 0) + dev_err(&spi->dev, "TXS timed out\n"); + else if (mcspi_wait_for_reg_bit(chstat_reg, + OMAP2_MCSPI_CHSTAT_EOT) < 0) + dev_err(&spi->dev, "EOT timed out\n"); + } } if (rx != NULL) { @@ -435,19 +461,6 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer) return count; } -static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit) -{ - unsigned long timeout; - - timeout = jiffies + msecs_to_jiffies(1000); - while (!(__raw_readl(reg) & bit)) { - if (time_after(jiffies, timeout)) - return -1; - cpu_relax(); - } - return 0; -} - static unsigned omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) { @@ -489,10 +502,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %02x\n", + dev_vdbg(&spi->dev, "write-%d %02x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -506,10 +517,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -522,10 +531,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %02x\n", + dev_vdbg(&spi->dev, "read-%d %02x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 16) { @@ -542,10 +549,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %04x\n", + dev_vdbg(&spi->dev, "write-%d %04x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -559,10 +564,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -575,10 +578,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %04x\n", + dev_vdbg(&spi->dev, "read-%d %04x\n", word_len, *(rx - 1)); -#endif } } while (c); } else if (word_len <= 32) { @@ -595,10 +596,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) dev_err(&spi->dev, "TXS timed out\n"); goto out; } -#ifdef VERBOSE - dev_dbg(&spi->dev, "write-%d %08x\n", + dev_vdbg(&spi->dev, "write-%d %08x\n", word_len, *tx); -#endif __raw_writel(*tx++, tx_reg); } if (rx != NULL) { @@ -612,10 +611,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) (l & OMAP2_MCSPI_CHCONF_TURBO)) { omap2_mcspi_set_enable(spi, 0); *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS) < 0) { dev_err(&spi->dev, @@ -628,10 +625,8 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } *rx++ = __raw_readl(rx_reg); -#ifdef VERBOSE - dev_dbg(&spi->dev, "read-%d %08x\n", + dev_vdbg(&spi->dev, "read-%d %08x\n", word_len, *(rx - 1)); -#endif } } while (c); } @@ -644,6 +639,12 @@ omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer) } else if (mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_EOT) < 0) dev_err(&spi->dev, "EOT timed out\n"); + + /* disable chan to purge rx datas received in TX_ONLY transfer, + * otherwise these rx datas will affect the direct following + * RX_ONLY transfer. + */ + omap2_mcspi_set_enable(spi, 0); } out: omap2_mcspi_set_enable(spi, 1); diff --git a/drivers/spi/orion_spi.c b/drivers/spi/orion_spi.c index 3aea50da7b29..0b677dc041ad 100644 --- a/drivers/spi/orion_spi.c +++ b/drivers/spi/orion_spi.c @@ -404,7 +404,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } - if ((t != NULL) && t->bits_per_word) + if (t->bits_per_word) bits_per_word = t->bits_per_word; if ((bits_per_word != 8) && (bits_per_word != 16)) { @@ -415,7 +415,7 @@ static int orion_spi_transfer(struct spi_device *spi, struct spi_message *m) goto msg_rejected; } /*make sure buffer length is even when working in 16 bit mode*/ - if ((t != NULL) && (t->bits_per_word == 16) && (t->len & 1)) { + if ((t->bits_per_word == 16) && (t->len & 1)) { dev_err(&spi->dev, "message rejected : " "odd data length (%d) while in 16 bit mode\n", diff --git a/drivers/spi/spi_bfin5xx.c b/drivers/spi/spi_bfin5xx.c index 10a6dc3d37ac..ab483a0ec6d0 100644 --- a/drivers/spi/spi_bfin5xx.c +++ b/drivers/spi/spi_bfin5xx.c @@ -1,7 +1,7 @@ /* * Blackfin On-Chip SPI Driver * - * Copyright 2004-2007 Analog Devices Inc. + * Copyright 2004-2010 Analog Devices Inc. * * Enter bugs at http://blackfin.uclinux.org/ * @@ -41,13 +41,16 @@ MODULE_LICENSE("GPL"); #define RUNNING_STATE ((void *)1) #define DONE_STATE ((void *)2) #define ERROR_STATE ((void *)-1) -#define QUEUE_RUNNING 0 -#define QUEUE_STOPPED 1 -/* Value to send if no TX value is supplied */ -#define SPI_IDLE_TXVAL 0x0000 +struct bfin_spi_master_data; -struct driver_data { +struct bfin_spi_transfer_ops { + void (*write) (struct bfin_spi_master_data *); + void (*read) (struct bfin_spi_master_data *); + void (*duplex) (struct bfin_spi_master_data *); +}; + +struct bfin_spi_master_data { /* Driver model hookup */ struct platform_device *pdev; @@ -69,7 +72,7 @@ struct driver_data { spinlock_t lock; struct list_head queue; int busy; - int run; + bool running; /* Message Transfer pump */ struct tasklet_struct pump_transfers; @@ -77,7 +80,7 @@ struct driver_data { /* Current message transfer state info */ struct spi_message *cur_msg; struct spi_transfer *cur_transfer; - struct chip_data *cur_chip; + struct bfin_spi_slave_data *cur_chip; size_t len_in_bytes; size_t len; void *tx; @@ -92,38 +95,37 @@ struct driver_data { dma_addr_t rx_dma; dma_addr_t tx_dma; + int irq_requested; + int spi_irq; + size_t rx_map_len; size_t tx_map_len; u8 n_bytes; + u16 ctrl_reg; + u16 flag_reg; + int cs_change; - void (*write) (struct driver_data *); - void (*read) (struct driver_data *); - void (*duplex) (struct driver_data *); + const struct bfin_spi_transfer_ops *ops; }; -struct chip_data { +struct bfin_spi_slave_data { u16 ctl_reg; u16 baud; u16 flag; u8 chip_select_num; - u8 n_bytes; - u8 width; /* 0 or 1 */ u8 enable_dma; - u8 bits_per_word; /* 8 or 16 */ - u8 cs_change_per_word; u16 cs_chg_udelay; /* Some devices require > 255usec delay */ u32 cs_gpio; u16 idle_tx_val; - void (*write) (struct driver_data *); - void (*read) (struct driver_data *); - void (*duplex) (struct driver_data *); + u8 pio_interrupt; /* use spi data irq */ + const struct bfin_spi_transfer_ops *ops; }; #define DEFINE_SPI_REG(reg, off) \ -static inline u16 read_##reg(struct driver_data *drv_data) \ +static inline u16 read_##reg(struct bfin_spi_master_data *drv_data) \ { return bfin_read16(drv_data->regs_base + off); } \ -static inline void write_##reg(struct driver_data *drv_data, u16 v) \ +static inline void write_##reg(struct bfin_spi_master_data *drv_data, u16 v) \ { bfin_write16(drv_data->regs_base + off, v); } DEFINE_SPI_REG(CTRL, 0x00) @@ -134,7 +136,7 @@ DEFINE_SPI_REG(RDBR, 0x10) DEFINE_SPI_REG(BAUD, 0x14) DEFINE_SPI_REG(SHAW, 0x18) -static void bfin_spi_enable(struct driver_data *drv_data) +static void bfin_spi_enable(struct bfin_spi_master_data *drv_data) { u16 cr; @@ -142,7 +144,7 @@ static void bfin_spi_enable(struct driver_data *drv_data) write_CTRL(drv_data, (cr | BIT_CTL_ENABLE)); } -static void bfin_spi_disable(struct driver_data *drv_data) +static void bfin_spi_disable(struct bfin_spi_master_data *drv_data) { u16 cr; @@ -165,7 +167,7 @@ static u16 hz_to_spi_baud(u32 speed_hz) return spi_baud; } -static int bfin_spi_flush(struct driver_data *drv_data) +static int bfin_spi_flush(struct bfin_spi_master_data *drv_data) { unsigned long limit = loops_per_jiffy << 1; @@ -179,13 +181,12 @@ static int bfin_spi_flush(struct driver_data *drv_data) } /* Chip select operation functions for cs_change flag */ -static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *chip) +static void bfin_spi_cs_active(struct bfin_spi_master_data *drv_data, struct bfin_spi_slave_data *chip) { - if (likely(chip->chip_select_num)) { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); - flag |= chip->flag; - flag &= ~(chip->flag << 8); + flag &= ~chip->flag; write_FLAG(drv_data, flag); } else { @@ -193,13 +194,13 @@ static void bfin_spi_cs_active(struct driver_data *drv_data, struct chip_data *c } } -static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data *chip) +static void bfin_spi_cs_deactive(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) { - if (likely(chip->chip_select_num)) { + if (likely(chip->chip_select_num < MAX_CTRL_CS)) { u16 flag = read_FLAG(drv_data); - flag &= ~chip->flag; - flag |= (chip->flag << 8); + flag |= chip->flag; write_FLAG(drv_data, flag); } else { @@ -211,16 +212,43 @@ static void bfin_spi_cs_deactive(struct driver_data *drv_data, struct chip_data udelay(chip->cs_chg_udelay); } +/* enable or disable the pin muxed by GPIO and SPI CS to work as SPI CS */ +static inline void bfin_spi_cs_enable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) +{ + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); + + flag |= (chip->flag >> 8); + + write_FLAG(drv_data, flag); + } +} + +static inline void bfin_spi_cs_disable(struct bfin_spi_master_data *drv_data, + struct bfin_spi_slave_data *chip) +{ + if (chip->chip_select_num < MAX_CTRL_CS) { + u16 flag = read_FLAG(drv_data); + + flag &= ~(chip->flag >> 8); + + write_FLAG(drv_data, flag); + } +} + /* stop controller and re-config current chip*/ -static void bfin_spi_restore_state(struct driver_data *drv_data) +static void bfin_spi_restore_state(struct bfin_spi_master_data *drv_data) { - struct chip_data *chip = drv_data->cur_chip; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; /* Clear status and disable clock */ write_STAT(drv_data, BIT_STAT_CLR); bfin_spi_disable(drv_data); dev_dbg(&drv_data->pdev->dev, "restoring spi ctl state\n"); + SSYNC(); + /* Load the registers */ write_CTRL(drv_data, chip->ctl_reg); write_BAUD(drv_data, chip->baud); @@ -230,49 +258,12 @@ static void bfin_spi_restore_state(struct driver_data *drv_data) } /* used to kick off transfer in rx mode and read unwanted RX data */ -static inline void bfin_spi_dummy_read(struct driver_data *drv_data) +static inline void bfin_spi_dummy_read(struct bfin_spi_master_data *drv_data) { (void) read_RDBR(drv_data); } -static void bfin_spi_null_writer(struct driver_data *drv_data) -{ - u8 n_bytes = drv_data->n_bytes; - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - write_TDBR(drv_data, tx_val); - drv_data->tx += n_bytes; - /* wait until transfer finished. - checking SPIF or TXS may not guarantee transfer completion */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - /* discard RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - } -} - -static void bfin_spi_null_reader(struct driver_data *drv_data) -{ - u8 n_bytes = drv_data->n_bytes; - u16 tx_val = drv_data->cur_chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - write_TDBR(drv_data, tx_val); - drv_data->rx += n_bytes; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - } -} - -static void bfin_spi_u8_writer(struct driver_data *drv_data) +static void bfin_spi_u8_writer(struct bfin_spi_master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -288,25 +279,7 @@ static void bfin_spi_u8_writer(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_writer(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - /* make sure transfer finished before deactiving CS */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u8_reader(struct driver_data *drv_data) +static void bfin_spi_u8_reader(struct bfin_spi_master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -321,25 +294,7 @@ static void bfin_spi_u8_reader(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_reader(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - u16 tx_val = chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u8_duplex(struct driver_data *drv_data) +static void bfin_spi_u8_duplex(struct bfin_spi_master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -352,24 +307,13 @@ static void bfin_spi_u8_duplex(struct driver_data *drv_data) } } -static void bfin_spi_u8_cs_chg_duplex(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u8 *) (drv_data->tx++))); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u8 *) (drv_data->rx++) = read_RDBR(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u8 = { + .write = bfin_spi_u8_writer, + .read = bfin_spi_u8_reader, + .duplex = bfin_spi_u8_duplex, +}; -static void bfin_spi_u16_writer(struct driver_data *drv_data) +static void bfin_spi_u16_writer(struct bfin_spi_master_data *drv_data) { /* clear RXS (we check for RXS inside the loop) */ bfin_spi_dummy_read(drv_data); @@ -386,26 +330,7 @@ static void bfin_spi_u16_writer(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_writer(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* clear RXS (we check for RXS inside the loop) */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->tx < drv_data->tx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - /* make sure transfer finished before deactiving CS */ - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - bfin_spi_dummy_read(drv_data); - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u16_reader(struct driver_data *drv_data) +static void bfin_spi_u16_reader(struct bfin_spi_master_data *drv_data) { u16 tx_val = drv_data->cur_chip->idle_tx_val; @@ -421,26 +346,7 @@ static void bfin_spi_u16_reader(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_reader(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - u16 tx_val = chip->idle_tx_val; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, tx_val); - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - bfin_spi_cs_deactive(drv_data, chip); - } -} - -static void bfin_spi_u16_duplex(struct driver_data *drv_data) +static void bfin_spi_u16_duplex(struct bfin_spi_master_data *drv_data) { /* discard old RX data and clear RXS */ bfin_spi_dummy_read(drv_data); @@ -455,27 +361,14 @@ static void bfin_spi_u16_duplex(struct driver_data *drv_data) } } -static void bfin_spi_u16_cs_chg_duplex(struct driver_data *drv_data) -{ - struct chip_data *chip = drv_data->cur_chip; - - /* discard old RX data and clear RXS */ - bfin_spi_dummy_read(drv_data); - - while (drv_data->rx < drv_data->rx_end) { - bfin_spi_cs_active(drv_data, chip); - write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); - drv_data->tx += 2; - while (!(read_STAT(drv_data) & BIT_STAT_RXS)) - cpu_relax(); - *(u16 *) (drv_data->rx) = read_RDBR(drv_data); - drv_data->rx += 2; - bfin_spi_cs_deactive(drv_data, chip); - } -} +static const struct bfin_spi_transfer_ops bfin_bfin_spi_transfer_ops_u16 = { + .write = bfin_spi_u16_writer, + .read = bfin_spi_u16_reader, + .duplex = bfin_spi_u16_duplex, +}; -/* test if ther is more transfer to be done */ -static void *bfin_spi_next_transfer(struct driver_data *drv_data) +/* test if there is more transfer to be done */ +static void *bfin_spi_next_transfer(struct bfin_spi_master_data *drv_data) { struct spi_message *msg = drv_data->cur_msg; struct spi_transfer *trans = drv_data->cur_transfer; @@ -494,9 +387,9 @@ static void *bfin_spi_next_transfer(struct driver_data *drv_data) * caller already set message->status; * dma and pio irqs are blocked give finished message back */ -static void bfin_spi_giveback(struct driver_data *drv_data) +static void bfin_spi_giveback(struct bfin_spi_master_data *drv_data) { - struct chip_data *chip = drv_data->cur_chip; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; struct spi_transfer *last_transfer; unsigned long flags; struct spi_message *msg; @@ -525,10 +418,83 @@ static void bfin_spi_giveback(struct driver_data *drv_data) msg->complete(msg->context); } +/* spi data irq handler */ +static irqreturn_t bfin_spi_pio_irq_handler(int irq, void *dev_id) +{ + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; + struct spi_message *msg = drv_data->cur_msg; + int n_bytes = drv_data->n_bytes; + + /* wait until transfer finished. */ + while (!(read_STAT(drv_data) & BIT_STAT_RXS)) + cpu_relax(); + + if ((drv_data->tx && drv_data->tx >= drv_data->tx_end) || + (drv_data->rx && drv_data->rx >= (drv_data->rx_end - n_bytes))) { + /* last read */ + if (drv_data->rx) { + dev_dbg(&drv_data->pdev->dev, "last read\n"); + if (n_bytes == 2) + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + else if (n_bytes == 1) + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + drv_data->rx += n_bytes; + } + + msg->actual_length += drv_data->len_in_bytes; + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); + /* Move to next transfer */ + msg->state = bfin_spi_next_transfer(drv_data); + + disable_irq_nosync(drv_data->spi_irq); + + /* Schedule transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); + return IRQ_HANDLED; + } + + if (drv_data->rx && drv_data->tx) { + /* duplex */ + dev_dbg(&drv_data->pdev->dev, "duplex: write_TDBR\n"); + if (drv_data->n_bytes == 2) { + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + } else if (drv_data->n_bytes == 1) { + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + } + } else if (drv_data->rx) { + /* read */ + dev_dbg(&drv_data->pdev->dev, "read: write_TDBR\n"); + if (drv_data->n_bytes == 2) + *(u16 *) (drv_data->rx) = read_RDBR(drv_data); + else if (drv_data->n_bytes == 1) + *(u8 *) (drv_data->rx) = read_RDBR(drv_data); + write_TDBR(drv_data, chip->idle_tx_val); + } else if (drv_data->tx) { + /* write */ + dev_dbg(&drv_data->pdev->dev, "write: write_TDBR\n"); + bfin_spi_dummy_read(drv_data); + if (drv_data->n_bytes == 2) + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + else if (drv_data->n_bytes == 1) + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + } + + if (drv_data->tx) + drv_data->tx += n_bytes; + if (drv_data->rx) + drv_data->rx += n_bytes; + + return IRQ_HANDLED; +} + static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) { - struct driver_data *drv_data = dev_id; - struct chip_data *chip = drv_data->cur_chip; + struct bfin_spi_master_data *drv_data = dev_id; + struct bfin_spi_slave_data *chip = drv_data->cur_chip; struct spi_message *msg = drv_data->cur_msg; unsigned long timeout; unsigned short dmastat = get_dma_curr_irqstat(drv_data->dma_channel); @@ -540,10 +506,6 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) clear_dma_irqstat(drv_data->dma_channel); - /* Wait for DMA to complete */ - while (get_dma_curr_irqstat(drv_data->dma_channel) & DMA_RUN) - cpu_relax(); - /* * wait for the last transaction shifted out. HRM states: * at this point there may still be data in the SPI DMA FIFO waiting @@ -551,8 +513,8 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) * register until it goes low for 2 successive reads */ if (drv_data->tx != NULL) { - while ((read_STAT(drv_data) & TXS) || - (read_STAT(drv_data) & TXS)) + while ((read_STAT(drv_data) & BIT_STAT_TXS) || + (read_STAT(drv_data) & BIT_STAT_TXS)) cpu_relax(); } @@ -561,14 +523,14 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) dmastat, read_STAT(drv_data)); timeout = jiffies + HZ; - while (!(read_STAT(drv_data) & SPIF)) + while (!(read_STAT(drv_data) & BIT_STAT_SPIF)) if (!time_before(jiffies, timeout)) { dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF"); break; } else cpu_relax(); - if ((dmastat & DMA_ERR) && (spistat & RBSY)) { + if ((dmastat & DMA_ERR) && (spistat & BIT_STAT_RBSY)) { msg->state = ERROR_STATE; dev_err(&drv_data->pdev->dev, "dma receive: fifo/buffer overflow\n"); } else { @@ -588,20 +550,20 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id) dev_dbg(&drv_data->pdev->dev, "disable dma channel irq%d\n", drv_data->dma_channel); - dma_disable_irq(drv_data->dma_channel); + dma_disable_irq_nosync(drv_data->dma_channel); return IRQ_HANDLED; } static void bfin_spi_pump_transfers(unsigned long data) { - struct driver_data *drv_data = (struct driver_data *)data; + struct bfin_spi_master_data *drv_data = (struct bfin_spi_master_data *)data; struct spi_message *message = NULL; struct spi_transfer *transfer = NULL; struct spi_transfer *previous = NULL; - struct chip_data *chip = NULL; - u8 width; - u16 cr, dma_width, dma_config; + struct bfin_spi_slave_data *chip = NULL; + unsigned int bits_per_word; + u16 cr, cr_width, dma_width, dma_config; u32 tranf_success = 1; u8 full_duplex = 0; @@ -639,7 +601,7 @@ static void bfin_spi_pump_transfers(unsigned long data) udelay(previous->delay_usecs); } - /* Setup the transfer state based on the type of transfer */ + /* Flush any existing transfers that may be sitting in the hardware */ if (bfin_spi_flush(drv_data) == 0) { dev_err(&drv_data->pdev->dev, "pump_transfers: flush failed\n"); message->status = -EIO; @@ -679,52 +641,31 @@ static void bfin_spi_pump_transfers(unsigned long data) drv_data->cs_change = transfer->cs_change; /* Bits per word setup */ - switch (transfer->bits_per_word) { - case 8: + bits_per_word = transfer->bits_per_word ? : message->spi->bits_per_word; + if (bits_per_word == 8) { drv_data->n_bytes = 1; - width = CFG_SPI_WORDSIZE8; - drv_data->read = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; - drv_data->write = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; - drv_data->duplex = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; - break; - - case 16: + drv_data->len = transfer->len; + cr_width = 0; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u8; + } else if (bits_per_word == 16) { drv_data->n_bytes = 2; - width = CFG_SPI_WORDSIZE16; - drv_data->read = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; - drv_data->write = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; - drv_data->duplex = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; - break; - - default: - /* No change, the same as default setting */ - drv_data->n_bytes = chip->n_bytes; - width = chip->width; - drv_data->write = drv_data->tx ? chip->write : bfin_spi_null_writer; - drv_data->read = drv_data->rx ? chip->read : bfin_spi_null_reader; - drv_data->duplex = chip->duplex ? chip->duplex : bfin_spi_null_writer; - break; - } - cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); - cr |= (width << 8); - write_CTRL(drv_data, cr); - - if (width == CFG_SPI_WORDSIZE16) { drv_data->len = (transfer->len) >> 1; + cr_width = BIT_CTL_WORDSIZE; + drv_data->ops = &bfin_bfin_spi_transfer_ops_u16; } else { - drv_data->len = transfer->len; + dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n"); + message->status = -EINVAL; + bfin_spi_giveback(drv_data); + return; } + cr = read_CTRL(drv_data) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE); + cr |= cr_width; + write_CTRL(drv_data, cr); + dev_dbg(&drv_data->pdev->dev, - "transfer: drv_data->write is %p, chip->write is %p, null_wr is %p\n", - drv_data->write, chip->write, bfin_spi_null_writer); + "transfer: drv_data->ops is %p, chip->ops is %p, u8_ops is %p\n", + drv_data->ops, chip->ops, &bfin_bfin_spi_transfer_ops_u8); - /* speed and width has been set on per message */ message->state = RUNNING_STATE; dma_config = 0; @@ -735,13 +676,11 @@ static void bfin_spi_pump_transfers(unsigned long data) write_BAUD(drv_data, chip->baud); write_STAT(drv_data, BIT_STAT_CLR); - cr = (read_CTRL(drv_data) & (~BIT_CTL_TIMOD)); - if (drv_data->cs_change) - bfin_spi_cs_active(drv_data, chip); + bfin_spi_cs_active(drv_data, chip); dev_dbg(&drv_data->pdev->dev, "now pumping a transfer: width is %d, len is %d\n", - width, transfer->len); + cr_width, transfer->len); /* * Try to map dma buffer and do a dma transfer. If successful use, @@ -760,7 +699,7 @@ static void bfin_spi_pump_transfers(unsigned long data) /* config dma channel */ dev_dbg(&drv_data->pdev->dev, "doing dma transfer\n"); set_dma_x_count(drv_data->dma_channel, drv_data->len); - if (width == CFG_SPI_WORDSIZE16) { + if (cr_width == BIT_CTL_WORDSIZE) { set_dma_x_modify(drv_data->dma_channel, 2); dma_width = WDSIZE_16; } else { @@ -846,73 +785,100 @@ static void bfin_spi_pump_transfers(unsigned long data) dma_enable_irq(drv_data->dma_channel); local_irq_restore(flags); - } else { - /* IO mode write then read */ - dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); - - /* we always use SPI_WRITE mode. SPI_READ mode - seems to have problems with setting up the - output value in TDBR prior to the transfer. */ - write_CTRL(drv_data, (cr | CFG_SPI_WRITE)); - - if (full_duplex) { - /* full duplex mode */ - BUG_ON((drv_data->tx_end - drv_data->tx) != - (drv_data->rx_end - drv_data->rx)); - dev_dbg(&drv_data->pdev->dev, - "IO duplex: cr is 0x%x\n", cr); - - drv_data->duplex(drv_data); + return; + } - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->tx != NULL) { - /* write only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO write: cr is 0x%x\n", cr); + /* + * We always use SPI_WRITE mode (transfer starts with TDBR write). + * SPI_READ mode (transfer starts with RDBR read) seems to have + * problems with setting up the output value in TDBR prior to the + * start of the transfer. + */ + write_CTRL(drv_data, cr | BIT_CTL_TXMOD); - drv_data->write(drv_data); + if (chip->pio_interrupt) { + /* SPI irq should have been disabled by now */ - if (drv_data->tx != drv_data->tx_end) - tranf_success = 0; - } else if (drv_data->rx != NULL) { - /* read only half duplex */ - dev_dbg(&drv_data->pdev->dev, - "IO read: cr is 0x%x\n", cr); + /* discard old RX data and clear RXS */ + bfin_spi_dummy_read(drv_data); - drv_data->read(drv_data); - if (drv_data->rx != drv_data->rx_end) - tranf_success = 0; + /* start transfer */ + if (drv_data->tx == NULL) + write_TDBR(drv_data, chip->idle_tx_val); + else { + if (bits_per_word == 8) + write_TDBR(drv_data, (*(u8 *) (drv_data->tx))); + else + write_TDBR(drv_data, (*(u16 *) (drv_data->tx))); + drv_data->tx += drv_data->n_bytes; } - if (!tranf_success) { - dev_dbg(&drv_data->pdev->dev, - "IO write error!\n"); - message->state = ERROR_STATE; - } else { - /* Update total byte transfered */ - message->actual_length += drv_data->len_in_bytes; - /* Move to next transfer of this msg */ - message->state = bfin_spi_next_transfer(drv_data); - if (drv_data->cs_change) - bfin_spi_cs_deactive(drv_data, chip); - } - /* Schedule next transfer tasklet */ - tasklet_schedule(&drv_data->pump_transfers); + /* once TDBR is empty, interrupt is triggered */ + enable_irq(drv_data->spi_irq); + return; + } + + /* IO mode */ + dev_dbg(&drv_data->pdev->dev, "doing IO transfer\n"); + + if (full_duplex) { + /* full duplex mode */ + BUG_ON((drv_data->tx_end - drv_data->tx) != + (drv_data->rx_end - drv_data->rx)); + dev_dbg(&drv_data->pdev->dev, + "IO duplex: cr is 0x%x\n", cr); + + drv_data->ops->duplex(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->tx != NULL) { + /* write only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO write: cr is 0x%x\n", cr); + + drv_data->ops->write(drv_data); + + if (drv_data->tx != drv_data->tx_end) + tranf_success = 0; + } else if (drv_data->rx != NULL) { + /* read only half duplex */ + dev_dbg(&drv_data->pdev->dev, + "IO read: cr is 0x%x\n", cr); + + drv_data->ops->read(drv_data); + if (drv_data->rx != drv_data->rx_end) + tranf_success = 0; + } + + if (!tranf_success) { + dev_dbg(&drv_data->pdev->dev, + "IO write error!\n"); + message->state = ERROR_STATE; + } else { + /* Update total byte transfered */ + message->actual_length += drv_data->len_in_bytes; + /* Move to next transfer of this msg */ + message->state = bfin_spi_next_transfer(drv_data); + if (drv_data->cs_change) + bfin_spi_cs_deactive(drv_data, chip); } + + /* Schedule next transfer tasklet */ + tasklet_schedule(&drv_data->pump_transfers); } /* pop a msg from queue and kick off real transfer */ static void bfin_spi_pump_messages(struct work_struct *work) { - struct driver_data *drv_data; + struct bfin_spi_master_data *drv_data; unsigned long flags; - drv_data = container_of(work, struct driver_data, pump_messages); + drv_data = container_of(work, struct bfin_spi_master_data, pump_messages); /* Lock queue and check for queue work */ spin_lock_irqsave(&drv_data->lock, flags); - if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) { + if (list_empty(&drv_data->queue) || !drv_data->running) { /* pumper kicked off but no work to do */ drv_data->busy = 0; spin_unlock_irqrestore(&drv_data->lock, flags); @@ -962,12 +928,12 @@ static void bfin_spi_pump_messages(struct work_struct *work) */ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) { - struct driver_data *drv_data = spi_master_get_devdata(spi->master); + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); - if (drv_data->run == QUEUE_STOPPED) { + if (!drv_data->running) { spin_unlock_irqrestore(&drv_data->lock, flags); return -ESHUTDOWN; } @@ -979,7 +945,7 @@ static int bfin_spi_transfer(struct spi_device *spi, struct spi_message *msg) dev_dbg(&spi->dev, "adding an msg in transfer() \n"); list_add_tail(&msg->queue, &drv_data->queue); - if (drv_data->run == QUEUE_RUNNING && !drv_data->busy) + if (drv_data->running && !drv_data->busy) queue_work(drv_data->workqueue, &drv_data->pump_messages); spin_unlock_irqrestore(&drv_data->lock, flags); @@ -1003,147 +969,184 @@ static u16 ssel[][MAX_SPI_SSEL] = { P_SPI2_SSEL6, P_SPI2_SSEL7}, }; -/* first setup for new devices */ +/* setup for devices (may be called multiple times -- not just first setup) */ static int bfin_spi_setup(struct spi_device *spi) { - struct bfin5xx_spi_chip *chip_info = NULL; - struct chip_data *chip; - struct driver_data *drv_data = spi_master_get_devdata(spi->master); - int ret; - - if (spi->bits_per_word != 8 && spi->bits_per_word != 16) - return -EINVAL; + struct bfin5xx_spi_chip *chip_info; + struct bfin_spi_slave_data *chip = NULL; + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); + u16 bfin_ctl_reg; + int ret = -EINVAL; /* Only alloc (or use chip_info) on first setup */ + chip_info = NULL; chip = spi_get_ctldata(spi); if (chip == NULL) { - chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL); - if (!chip) - return -ENOMEM; + chip = kzalloc(sizeof(*chip), GFP_KERNEL); + if (!chip) { + dev_err(&spi->dev, "cannot allocate chip data\n"); + ret = -ENOMEM; + goto error; + } chip->enable_dma = 0; chip_info = spi->controller_data; } + /* Let people set non-standard bits directly */ + bfin_ctl_reg = BIT_CTL_OPENDRAIN | BIT_CTL_EMISO | + BIT_CTL_PSSE | BIT_CTL_GM | BIT_CTL_SZ; + /* chip_info isn't always needed */ if (chip_info) { /* Make sure people stop trying to set fields via ctl_reg * when they should actually be using common SPI framework. - * Currently we let through: WOM EMISO PSSE GM SZ TIMOD. + * Currently we let through: WOM EMISO PSSE GM SZ. * Not sure if a user actually needs/uses any of these, * but let's assume (for now) they do. */ - if (chip_info->ctl_reg & (SPE|MSTR|CPOL|CPHA|LSBF|SIZE)) { + if (chip_info->ctl_reg & ~bfin_ctl_reg) { dev_err(&spi->dev, "do not set bits in ctl_reg " "that the SPI framework manages\n"); - return -EINVAL; + goto error; } - chip->enable_dma = chip_info->enable_dma != 0 && drv_data->master_info->enable_dma; chip->ctl_reg = chip_info->ctl_reg; - chip->bits_per_word = chip_info->bits_per_word; - chip->cs_change_per_word = chip_info->cs_change_per_word; chip->cs_chg_udelay = chip_info->cs_chg_udelay; - chip->cs_gpio = chip_info->cs_gpio; chip->idle_tx_val = chip_info->idle_tx_val; + chip->pio_interrupt = chip_info->pio_interrupt; + spi->bits_per_word = chip_info->bits_per_word; + } else { + /* force a default base state */ + chip->ctl_reg &= bfin_ctl_reg; + } + + if (spi->bits_per_word != 8 && spi->bits_per_word != 16) { + dev_err(&spi->dev, "%d bits_per_word is not supported\n", + spi->bits_per_word); + goto error; } /* translate common spi framework into our register */ + if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) { + dev_err(&spi->dev, "unsupported spi modes detected\n"); + goto error; + } if (spi->mode & SPI_CPOL) - chip->ctl_reg |= CPOL; + chip->ctl_reg |= BIT_CTL_CPOL; if (spi->mode & SPI_CPHA) - chip->ctl_reg |= CPHA; + chip->ctl_reg |= BIT_CTL_CPHA; if (spi->mode & SPI_LSB_FIRST) - chip->ctl_reg |= LSBF; + chip->ctl_reg |= BIT_CTL_LSBF; /* we dont support running in slave mode (yet?) */ - chip->ctl_reg |= MSTR; + chip->ctl_reg |= BIT_CTL_MASTER; /* + * Notice: for blackfin, the speed_hz is the value of register + * SPI_BAUD, not the real baudrate + */ + chip->baud = hz_to_spi_baud(spi->max_speed_hz); + chip->chip_select_num = spi->chip_select; + if (chip->chip_select_num < MAX_CTRL_CS) { + if (!(spi->mode & SPI_CPHA)) + dev_warn(&spi->dev, "Warning: SPI CPHA not set:" + " Slave Select not under software control!\n" + " See Documentation/blackfin/bfin-spi-notes.txt"); + + chip->flag = (1 << spi->chip_select) << 8; + } else + chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS; + + if (chip->enable_dma && chip->pio_interrupt) { + dev_err(&spi->dev, "enable_dma is set, " + "do not set pio_interrupt\n"); + goto error; + } + /* * if any one SPI chip is registered and wants DMA, request the * DMA channel for it */ if (chip->enable_dma && !drv_data->dma_requested) { /* register dma irq handler */ - if (request_dma(drv_data->dma_channel, "BFIN_SPI_DMA") < 0) { - dev_dbg(&spi->dev, + ret = request_dma(drv_data->dma_channel, "BFIN_SPI_DMA"); + if (ret) { + dev_err(&spi->dev, "Unable to request BlackFin SPI DMA channel\n"); - return -ENODEV; + goto error; } - if (set_dma_callback(drv_data->dma_channel, - bfin_spi_dma_irq_handler, drv_data) < 0) { - dev_dbg(&spi->dev, "Unable to set dma callback\n"); - return -EPERM; + drv_data->dma_requested = 1; + + ret = set_dma_callback(drv_data->dma_channel, + bfin_spi_dma_irq_handler, drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to set dma callback\n"); + goto error; } dma_disable_irq(drv_data->dma_channel); - drv_data->dma_requested = 1; } - /* - * Notice: for blackfin, the speed_hz is the value of register - * SPI_BAUD, not the real baudrate - */ - chip->baud = hz_to_spi_baud(spi->max_speed_hz); - chip->flag = 1 << (spi->chip_select); - chip->chip_select_num = spi->chip_select; + if (chip->pio_interrupt && !drv_data->irq_requested) { + ret = request_irq(drv_data->spi_irq, bfin_spi_pio_irq_handler, + IRQF_DISABLED, "BFIN_SPI", drv_data); + if (ret) { + dev_err(&spi->dev, "Unable to register spi IRQ\n"); + goto error; + } + drv_data->irq_requested = 1; + /* we use write mode, spi irq has to be disabled here */ + disable_irq(drv_data->spi_irq); + } - if (chip->chip_select_num == 0) { + if (chip->chip_select_num >= MAX_CTRL_CS) { ret = gpio_request(chip->cs_gpio, spi->modalias); if (ret) { - if (drv_data->dma_requested) - free_dma(drv_data->dma_channel); - return ret; + dev_err(&spi->dev, "gpio_request() error\n"); + goto pin_error; } gpio_direction_output(chip->cs_gpio, 1); } - switch (chip->bits_per_word) { - case 8: - chip->n_bytes = 1; - chip->width = CFG_SPI_WORDSIZE8; - chip->read = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_reader : bfin_spi_u8_reader; - chip->write = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_writer : bfin_spi_u8_writer; - chip->duplex = chip->cs_change_per_word ? - bfin_spi_u8_cs_chg_duplex : bfin_spi_u8_duplex; - break; - - case 16: - chip->n_bytes = 2; - chip->width = CFG_SPI_WORDSIZE16; - chip->read = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_reader : bfin_spi_u16_reader; - chip->write = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_writer : bfin_spi_u16_writer; - chip->duplex = chip->cs_change_per_word ? - bfin_spi_u16_cs_chg_duplex : bfin_spi_u16_duplex; - break; - - default: - dev_err(&spi->dev, "%d bits_per_word is not supported\n", - chip->bits_per_word); - if (chip_info) - kfree(chip); - return -ENODEV; - } - dev_dbg(&spi->dev, "setup spi chip %s, width is %d, dma is %d\n", - spi->modalias, chip->width, chip->enable_dma); + spi->modalias, spi->bits_per_word, chip->enable_dma); dev_dbg(&spi->dev, "ctl_reg is 0x%x, flag_reg is 0x%x\n", chip->ctl_reg, chip->flag); spi_set_ctldata(spi, chip); dev_dbg(&spi->dev, "chip select number is %d\n", chip->chip_select_num); - if ((chip->chip_select_num > 0) - && (chip->chip_select_num <= spi->master->num_chipselect)) - peripheral_request(ssel[spi->master->bus_num] - [chip->chip_select_num-1], spi->modalias); + if (chip->chip_select_num < MAX_CTRL_CS) { + ret = peripheral_request(ssel[spi->master->bus_num] + [chip->chip_select_num-1], spi->modalias); + if (ret) { + dev_err(&spi->dev, "peripheral_request() error\n"); + goto pin_error; + } + } + bfin_spi_cs_enable(drv_data, chip); bfin_spi_cs_deactive(drv_data, chip); return 0; + + pin_error: + if (chip->chip_select_num >= MAX_CTRL_CS) + gpio_free(chip->cs_gpio); + else + peripheral_free(ssel[spi->master->bus_num] + [chip->chip_select_num - 1]); + error: + if (chip) { + if (drv_data->dma_requested) + free_dma(drv_data->dma_channel); + drv_data->dma_requested = 0; + + kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); + } + + return ret; } /* @@ -1152,28 +1155,30 @@ static int bfin_spi_setup(struct spi_device *spi) */ static void bfin_spi_cleanup(struct spi_device *spi) { - struct chip_data *chip = spi_get_ctldata(spi); + struct bfin_spi_slave_data *chip = spi_get_ctldata(spi); + struct bfin_spi_master_data *drv_data = spi_master_get_devdata(spi->master); if (!chip) return; - if ((chip->chip_select_num > 0) - && (chip->chip_select_num <= spi->master->num_chipselect)) + if (chip->chip_select_num < MAX_CTRL_CS) { peripheral_free(ssel[spi->master->bus_num] [chip->chip_select_num-1]); - - if (chip->chip_select_num == 0) + bfin_spi_cs_disable(drv_data, chip); + } else gpio_free(chip->cs_gpio); kfree(chip); + /* prevent free 'chip' twice */ + spi_set_ctldata(spi, NULL); } -static inline int bfin_spi_init_queue(struct driver_data *drv_data) +static inline int bfin_spi_init_queue(struct bfin_spi_master_data *drv_data) { INIT_LIST_HEAD(&drv_data->queue); spin_lock_init(&drv_data->lock); - drv_data->run = QUEUE_STOPPED; + drv_data->running = false; drv_data->busy = 0; /* init transfer tasklet */ @@ -1190,18 +1195,18 @@ static inline int bfin_spi_init_queue(struct driver_data *drv_data) return 0; } -static inline int bfin_spi_start_queue(struct driver_data *drv_data) +static inline int bfin_spi_start_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; spin_lock_irqsave(&drv_data->lock, flags); - if (drv_data->run == QUEUE_RUNNING || drv_data->busy) { + if (drv_data->running || drv_data->busy) { spin_unlock_irqrestore(&drv_data->lock, flags); return -EBUSY; } - drv_data->run = QUEUE_RUNNING; + drv_data->running = true; drv_data->cur_msg = NULL; drv_data->cur_transfer = NULL; drv_data->cur_chip = NULL; @@ -1212,7 +1217,7 @@ static inline int bfin_spi_start_queue(struct driver_data *drv_data) return 0; } -static inline int bfin_spi_stop_queue(struct driver_data *drv_data) +static inline int bfin_spi_stop_queue(struct bfin_spi_master_data *drv_data) { unsigned long flags; unsigned limit = 500; @@ -1226,7 +1231,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) * execution path (pump_messages) would be required to call wake_up or * friends on every SPI message. Do this instead */ - drv_data->run = QUEUE_STOPPED; + drv_data->running = false; while (!list_empty(&drv_data->queue) && drv_data->busy && limit--) { spin_unlock_irqrestore(&drv_data->lock, flags); msleep(10); @@ -1241,7 +1246,7 @@ static inline int bfin_spi_stop_queue(struct driver_data *drv_data) return status; } -static inline int bfin_spi_destroy_queue(struct driver_data *drv_data) +static inline int bfin_spi_destroy_queue(struct bfin_spi_master_data *drv_data) { int status; @@ -1259,14 +1264,14 @@ static int __init bfin_spi_probe(struct platform_device *pdev) struct device *dev = &pdev->dev; struct bfin5xx_spi_master *platform_info; struct spi_master *master; - struct driver_data *drv_data = 0; + struct bfin_spi_master_data *drv_data; struct resource *res; int status = 0; platform_info = dev->platform_data; /* Allocate master with space for drv_data */ - master = spi_alloc_master(dev, sizeof(struct driver_data) + 16); + master = spi_alloc_master(dev, sizeof(*drv_data)); if (!master) { dev_err(&pdev->dev, "can not alloc spi_master\n"); return -ENOMEM; @@ -1302,11 +1307,19 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_ioremap; } - drv_data->dma_channel = platform_get_irq(pdev, 0); - if (drv_data->dma_channel < 0) { + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { dev_err(dev, "No DMA channel specified\n"); status = -ENOENT; - goto out_error_no_dma_ch; + goto out_error_free_io; + } + drv_data->dma_channel = res->start; + + drv_data->spi_irq = platform_get_irq(pdev, 0); + if (drv_data->spi_irq < 0) { + dev_err(dev, "No spi pio irq specified\n"); + status = -ENOENT; + goto out_error_free_io; } /* Initial and start queue */ @@ -1328,6 +1341,12 @@ static int __init bfin_spi_probe(struct platform_device *pdev) goto out_error_queue_alloc; } + /* Reset SPI registers. If these registers were used by the boot loader, + * the sky may fall on your head if you enable the dma controller. + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); + /* Register with the SPI framework */ platform_set_drvdata(pdev, drv_data); status = spi_register_master(master); @@ -1343,7 +1362,7 @@ static int __init bfin_spi_probe(struct platform_device *pdev) out_error_queue_alloc: bfin_spi_destroy_queue(drv_data); -out_error_no_dma_ch: +out_error_free_io: iounmap((void *) drv_data->regs_base); out_error_ioremap: out_error_get_res: @@ -1355,7 +1374,7 @@ out_error_get_res: /* stop hardware and remove the driver */ static int __devexit bfin_spi_remove(struct platform_device *pdev) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; if (!drv_data) @@ -1375,6 +1394,11 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) free_dma(drv_data->dma_channel); } + if (drv_data->irq_requested) { + free_irq(drv_data->spi_irq, drv_data); + drv_data->irq_requested = 0; + } + /* Disconnect from the SPI framework */ spi_unregister_master(drv_data->master); @@ -1389,26 +1413,32 @@ static int __devexit bfin_spi_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int bfin_spi_suspend(struct platform_device *pdev, pm_message_t state) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; status = bfin_spi_stop_queue(drv_data); if (status != 0) return status; - /* stop hardware */ - bfin_spi_disable(drv_data); + drv_data->ctrl_reg = read_CTRL(drv_data); + drv_data->flag_reg = read_FLAG(drv_data); + + /* + * reset SPI_CTL and SPI_FLG registers + */ + write_CTRL(drv_data, BIT_CTL_CPHA | BIT_CTL_MASTER); + write_FLAG(drv_data, 0xFF00); return 0; } static int bfin_spi_resume(struct platform_device *pdev) { - struct driver_data *drv_data = platform_get_drvdata(pdev); + struct bfin_spi_master_data *drv_data = platform_get_drvdata(pdev); int status = 0; - /* Enable the SPI interface */ - bfin_spi_enable(drv_data); + write_CTRL(drv_data, drv_data->ctrl_reg); + write_FLAG(drv_data, drv_data->flag_reg); /* Start the queue running */ status = bfin_spi_start_queue(drv_data); @@ -1439,7 +1469,7 @@ static int __init bfin_spi_init(void) { return platform_driver_probe(&bfin_spi_driver, bfin_spi_probe); } -module_init(bfin_spi_init); +subsys_initcall(bfin_spi_init); static void __exit bfin_spi_exit(void) { diff --git a/drivers/spi/spi_fsl_espi.c b/drivers/spi/spi_fsl_espi.c new file mode 100644 index 000000000000..e3b4f6451966 --- /dev/null +++ b/drivers/spi/spi_fsl_espi.c @@ -0,0 +1,748 @@ +/* + * Freescale eSPI controller driver. + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/spi/spi.h> +#include <linux/platform_device.h> +#include <linux/fsl_devices.h> +#include <linux/mm.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/of_spi.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <sysdev/fsl_soc.h> + +#include "spi_fsl_lib.h" + +/* eSPI Controller registers */ +struct fsl_espi_reg { + __be32 mode; /* 0x000 - eSPI mode register */ + __be32 event; /* 0x004 - eSPI event register */ + __be32 mask; /* 0x008 - eSPI mask register */ + __be32 command; /* 0x00c - eSPI command register */ + __be32 transmit; /* 0x010 - eSPI transmit FIFO access register*/ + __be32 receive; /* 0x014 - eSPI receive FIFO access register*/ + u8 res[8]; /* 0x018 - 0x01c reserved */ + __be32 csmode[4]; /* 0x020 - 0x02c eSPI cs mode register */ +}; + +struct fsl_espi_transfer { + const void *tx_buf; + void *rx_buf; + unsigned len; + unsigned n_tx; + unsigned n_rx; + unsigned actual_length; + int status; +}; + +/* eSPI Controller mode register definitions */ +#define SPMODE_ENABLE (1 << 31) +#define SPMODE_LOOP (1 << 30) +#define SPMODE_TXTHR(x) ((x) << 8) +#define SPMODE_RXTHR(x) ((x) << 0) + +/* eSPI Controller CS mode register definitions */ +#define CSMODE_CI_INACTIVEHIGH (1 << 31) +#define CSMODE_CP_BEGIN_EDGECLK (1 << 30) +#define CSMODE_REV (1 << 29) +#define CSMODE_DIV16 (1 << 28) +#define CSMODE_PM(x) ((x) << 24) +#define CSMODE_POL_1 (1 << 20) +#define CSMODE_LEN(x) ((x) << 16) +#define CSMODE_BEF(x) ((x) << 12) +#define CSMODE_AFT(x) ((x) << 8) +#define CSMODE_CG(x) ((x) << 3) + +/* Default mode/csmode for eSPI controller */ +#define SPMODE_INIT_VAL (SPMODE_TXTHR(4) | SPMODE_RXTHR(3)) +#define CSMODE_INIT_VAL (CSMODE_POL_1 | CSMODE_BEF(0) \ + | CSMODE_AFT(0) | CSMODE_CG(1)) + +/* SPIE register values */ +#define SPIE_NE 0x00000200 /* Not empty */ +#define SPIE_NF 0x00000100 /* Not full */ + +/* SPIM register values */ +#define SPIM_NE 0x00000200 /* Not empty */ +#define SPIM_NF 0x00000100 /* Not full */ +#define SPIE_RXCNT(reg) ((reg >> 24) & 0x3F) +#define SPIE_TXCNT(reg) ((reg >> 16) & 0x3F) + +/* SPCOM register values */ +#define SPCOM_CS(x) ((x) << 30) +#define SPCOM_TRANLEN(x) ((x) << 0) +#define SPCOM_TRANLEN_MAX 0xFFFF /* Max transaction length */ + +static void fsl_espi_change_mode(struct spi_device *spi) +{ + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct spi_mpc8xxx_cs *cs = spi->controller_state; + struct fsl_espi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->csmode[spi->chip_select]; + __be32 __iomem *espi_mode = ®_base->mode; + u32 tmp; + unsigned long flags; + + /* Turn off IRQs locally to minimize time that SPI is disabled. */ + local_irq_save(flags); + + /* Turn off SPI unit prior changing mode */ + tmp = mpc8xxx_spi_read_reg(espi_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp & ~SPMODE_ENABLE); + mpc8xxx_spi_write_reg(mode, cs->hw_mode); + mpc8xxx_spi_write_reg(espi_mode, tmp); + + local_irq_restore(flags); +} + +static u32 fsl_espi_tx_buf_lsb(struct mpc8xxx_spi *mpc8xxx_spi) +{ + u32 data; + u16 data_h; + u16 data_l; + const u32 *tx = mpc8xxx_spi->tx; + + if (!tx) + return 0; + + data = *tx++ << mpc8xxx_spi->tx_shift; + data_l = data & 0xffff; + data_h = (data >> 16) & 0xffff; + swab16s(&data_l); + swab16s(&data_h); + data = data_h | data_l; + + mpc8xxx_spi->tx = tx; + return data; +} + +static int fsl_espi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + int bits_per_word = 0; + u8 pm; + u32 hz = 0; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (t) { + bits_per_word = t->bits_per_word; + hz = t->speed_hz; + } + + /* spi_transfer level calls that work per-word */ + if (!bits_per_word) + bits_per_word = spi->bits_per_word; + + /* Make sure its a bit width we support [4..16] */ + if ((bits_per_word < 4) || (bits_per_word > 16)) + return -EINVAL; + + if (!hz) + hz = spi->max_speed_hz; + + cs->rx_shift = 0; + cs->tx_shift = 0; + cs->get_rx = mpc8xxx_spi_rx_buf_u32; + cs->get_tx = mpc8xxx_spi_tx_buf_u32; + if (bits_per_word <= 8) { + cs->rx_shift = 8 - bits_per_word; + } else if (bits_per_word <= 16) { + cs->rx_shift = 16 - bits_per_word; + if (spi->mode & SPI_LSB_FIRST) + cs->get_tx = fsl_espi_tx_buf_lsb; + } else { + return -EINVAL; + } + + mpc8xxx_spi->rx_shift = cs->rx_shift; + mpc8xxx_spi->tx_shift = cs->tx_shift; + mpc8xxx_spi->get_rx = cs->get_rx; + mpc8xxx_spi->get_tx = cs->get_tx; + + bits_per_word = bits_per_word - 1; + + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_LEN(0xF) | CSMODE_DIV16 | CSMODE_PM(0xF)); + + cs->hw_mode |= CSMODE_LEN(bits_per_word); + + if ((mpc8xxx_spi->spibrg / hz) > 64) { + cs->hw_mode |= CSMODE_DIV16; + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 64) + 1; + + WARN_ONCE(pm > 16, "%s: Requested speed is too low: %d Hz. " + "Will use %d Hz instead.\n", dev_name(&spi->dev), + hz, mpc8xxx_spi->spibrg / 1024); + if (pm > 16) + pm = 16; + } else { + pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } + if (pm) + pm--; + + cs->hw_mode |= CSMODE_PM(pm); + + fsl_espi_change_mode(spi); + return 0; +} + +static int fsl_espi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, + unsigned int len) +{ + u32 word; + struct fsl_espi_reg *reg_base = mspi->reg_base; + + mspi->count = len; + + /* enable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); + + /* transmit word */ + word = mspi->get_tx(mspi); + mpc8xxx_spi_write_reg(®_base->transmit, word); + + return 0; +} + +static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_espi_reg *reg_base = mpc8xxx_spi->reg_base; + unsigned int len = t->len; + u8 bits_per_word; + int ret; + + bits_per_word = spi->bits_per_word; + if (t->bits_per_word) + bits_per_word = t->bits_per_word; + + mpc8xxx_spi->len = t->len; + len = roundup(len, 4) / 4; + + mpc8xxx_spi->tx = t->tx_buf; + mpc8xxx_spi->rx = t->rx_buf; + + INIT_COMPLETION(mpc8xxx_spi->done); + + /* Set SPCOM[CS] and SPCOM[TRANLEN] field */ + if ((t->len - 1) > SPCOM_TRANLEN_MAX) { + dev_err(mpc8xxx_spi->dev, "Transaction length (%d)" + " beyond the SPCOM[TRANLEN] field\n", t->len); + return -EINVAL; + } + mpc8xxx_spi_write_reg(®_base->command, + (SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1))); + + ret = fsl_espi_cpu_bufs(mpc8xxx_spi, t, len); + if (ret) + return ret; + + wait_for_completion(&mpc8xxx_spi->done); + + /* disable rx ints */ + mpc8xxx_spi_write_reg(®_base->mask, 0); + + return mpc8xxx_spi->count; +} + +static void fsl_espi_addr2cmd(unsigned int addr, u8 *cmd) +{ + if (cmd[1] && cmd[2] && cmd[3]) { + cmd[1] = (u8)(addr >> 16); + cmd[2] = (u8)(addr >> 8); + cmd[3] = (u8)(addr >> 0); + } +} + +static unsigned int fsl_espi_cmd2addr(u8 *cmd) +{ + if (cmd[1] && cmd[2] && cmd[3]) + return cmd[1] << 16 | cmd[2] << 8 | cmd[3] << 0; + + return 0; +} + +static void fsl_espi_do_trans(struct spi_message *m, + struct fsl_espi_transfer *tr) +{ + struct spi_device *spi = m->spi; + struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); + struct fsl_espi_transfer *espi_trans = tr; + struct spi_message message; + struct spi_transfer *t, *first, trans; + int status = 0; + + spi_message_init(&message); + memset(&trans, 0, sizeof(trans)); + + first = list_first_entry(&m->transfers, struct spi_transfer, + transfer_list); + list_for_each_entry(t, &m->transfers, transfer_list) { + if ((first->bits_per_word != t->bits_per_word) || + (first->speed_hz != t->speed_hz)) { + espi_trans->status = -EINVAL; + dev_err(mspi->dev, "bits_per_word/speed_hz should be" + " same for the same SPI transfer\n"); + return; + } + + trans.speed_hz = t->speed_hz; + trans.bits_per_word = t->bits_per_word; + trans.delay_usecs = max(first->delay_usecs, t->delay_usecs); + } + + trans.len = espi_trans->len; + trans.tx_buf = espi_trans->tx_buf; + trans.rx_buf = espi_trans->rx_buf; + spi_message_add_tail(&trans, &message); + + list_for_each_entry(t, &message.transfers, transfer_list) { + if (t->bits_per_word || t->speed_hz) { + status = -EINVAL; + + status = fsl_espi_setup_transfer(spi, t); + if (status < 0) + break; + } + + if (t->len) + status = fsl_espi_bufs(spi, t); + + if (status) { + status = -EMSGSIZE; + break; + } + + if (t->delay_usecs) + udelay(t->delay_usecs); + } + + espi_trans->status = status; + fsl_espi_setup_transfer(spi, NULL); +} + +static void fsl_espi_cmd_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct spi_transfer *t; + u8 *local_buf; + int i = 0; + struct fsl_espi_transfer *espi_trans = trans; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + espi_trans->n_tx; + fsl_espi_do_trans(m, espi_trans); + + espi_trans->actual_length = espi_trans->len; + kfree(local_buf); +} + +static void fsl_espi_rw_trans(struct spi_message *m, + struct fsl_espi_transfer *trans, u8 *rx_buff) +{ + struct fsl_espi_transfer *espi_trans = trans; + unsigned int n_tx = espi_trans->n_tx; + unsigned int n_rx = espi_trans->n_rx; + struct spi_transfer *t; + u8 *local_buf; + u8 *rx_buf = rx_buff; + unsigned int trans_len; + unsigned int addr; + int i, pos, loop; + + local_buf = kzalloc(SPCOM_TRANLEN_MAX, GFP_KERNEL); + if (!local_buf) { + espi_trans->status = -ENOMEM; + return; + } + + for (pos = 0, loop = 0; pos < n_rx; pos += trans_len, loop++) { + trans_len = n_rx - pos; + if (trans_len > SPCOM_TRANLEN_MAX - n_tx) + trans_len = SPCOM_TRANLEN_MAX - n_tx; + + i = 0; + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) { + memcpy(local_buf + i, t->tx_buf, t->len); + i += t->len; + } + } + + addr = fsl_espi_cmd2addr(local_buf); + addr += pos; + fsl_espi_addr2cmd(addr, local_buf); + + espi_trans->n_tx = n_tx; + espi_trans->n_rx = trans_len; + espi_trans->len = trans_len + n_tx; + espi_trans->tx_buf = local_buf; + espi_trans->rx_buf = local_buf + n_tx; + fsl_espi_do_trans(m, espi_trans); + + memcpy(rx_buf + pos, espi_trans->rx_buf + n_tx, trans_len); + + if (loop > 0) + espi_trans->actual_length += espi_trans->len - n_tx; + else + espi_trans->actual_length += espi_trans->len; + } + + kfree(local_buf); +} + +static void fsl_espi_do_one_msg(struct spi_message *m) +{ + struct spi_transfer *t; + u8 *rx_buf = NULL; + unsigned int n_tx = 0; + unsigned int n_rx = 0; + struct fsl_espi_transfer espi_trans; + + list_for_each_entry(t, &m->transfers, transfer_list) { + if (t->tx_buf) + n_tx += t->len; + if (t->rx_buf) { + n_rx += t->len; + rx_buf = t->rx_buf; + } + } + + espi_trans.n_tx = n_tx; + espi_trans.n_rx = n_rx; + espi_trans.len = n_tx + n_rx; + espi_trans.actual_length = 0; + espi_trans.status = 0; + + if (!rx_buf) + fsl_espi_cmd_trans(m, &espi_trans, NULL); + else + fsl_espi_rw_trans(m, &espi_trans, rx_buf); + + m->actual_length = espi_trans.actual_length; + m->status = espi_trans.status; + m->complete(m->context); +} + +static int fsl_espi_setup(struct spi_device *spi) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + int retval; + u32 hw_mode; + u32 loop_mode; + struct spi_mpc8xxx_cs *cs = spi->controller_state; + + if (!spi->max_speed_hz) + return -EINVAL; + + if (!cs) { + cs = kzalloc(sizeof *cs, GFP_KERNEL); + if (!cs) + return -ENOMEM; + spi->controller_state = cs; + } + + mpc8xxx_spi = spi_master_get_devdata(spi->master); + reg_base = mpc8xxx_spi->reg_base; + + hw_mode = cs->hw_mode; /* Save orginal settings */ + cs->hw_mode = mpc8xxx_spi_read_reg( + ®_base->csmode[spi->chip_select]); + /* mask out bits we are going to set */ + cs->hw_mode &= ~(CSMODE_CP_BEGIN_EDGECLK | CSMODE_CI_INACTIVEHIGH + | CSMODE_REV); + + if (spi->mode & SPI_CPHA) + cs->hw_mode |= CSMODE_CP_BEGIN_EDGECLK; + if (spi->mode & SPI_CPOL) + cs->hw_mode |= CSMODE_CI_INACTIVEHIGH; + if (!(spi->mode & SPI_LSB_FIRST)) + cs->hw_mode |= CSMODE_REV; + + /* Handle the loop mode */ + loop_mode = mpc8xxx_spi_read_reg(®_base->mode); + loop_mode &= ~SPMODE_LOOP; + if (spi->mode & SPI_LOOP) + loop_mode |= SPMODE_LOOP; + mpc8xxx_spi_write_reg(®_base->mode, loop_mode); + + retval = fsl_espi_setup_transfer(spi, NULL); + if (retval < 0) { + cs->hw_mode = hw_mode; /* Restore settings */ + return retval; + } + return 0; +} + +void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +{ + struct fsl_espi_reg *reg_base = mspi->reg_base; + + /* We need handle RX first */ + if (events & SPIE_NE) { + u32 rx_data; + + /* Spin until RX is done */ + while (SPIE_RXCNT(events) < min(4, mspi->len)) { + cpu_relax(); + events = mpc8xxx_spi_read_reg(®_base->event); + } + mspi->len -= 4; + + rx_data = mpc8xxx_spi_read_reg(®_base->receive); + + if (mspi->rx) + mspi->get_rx(rx_data, mspi); + } + + if (!(events & SPIE_NF)) { + int ret; + + /* spin until TX is done */ + ret = spin_event_timeout(((events = mpc8xxx_spi_read_reg( + ®_base->event)) & SPIE_NF) == 0, 1000, 0); + if (!ret) { + dev_err(mspi->dev, "tired waiting for SPIE_NF\n"); + return; + } + } + + /* Clear the events */ + mpc8xxx_spi_write_reg(®_base->event, events); + + mspi->count -= 1; + if (mspi->count) { + u32 word = mspi->get_tx(mspi); + + mpc8xxx_spi_write_reg(®_base->transmit, word); + } else { + complete(&mspi->done); + } +} + +static irqreturn_t fsl_espi_irq(s32 irq, void *context_data) +{ + struct mpc8xxx_spi *mspi = context_data; + struct fsl_espi_reg *reg_base = mspi->reg_base; + irqreturn_t ret = IRQ_NONE; + u32 events; + + /* Get interrupt events(tx/rx) */ + events = mpc8xxx_spi_read_reg(®_base->event); + if (events) + ret = IRQ_HANDLED; + + dev_vdbg(mspi->dev, "%s: events %x\n", __func__, events); + + fsl_espi_cpu_irq(mspi, events); + + return ret; +} + +static void fsl_espi_remove(struct mpc8xxx_spi *mspi) +{ + iounmap(mspi->reg_base); +} + +static struct spi_master * __devinit fsl_espi_probe(struct device *dev, + struct resource *mem, unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_espi_reg *reg_base; + u32 regval; + int i, ret = 0; + + master = spi_alloc_master(dev, sizeof(struct mpc8xxx_spi)); + if (!master) { + ret = -ENOMEM; + goto err; + } + + dev_set_drvdata(dev, master); + + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; + + master->setup = fsl_espi_setup; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->spi_do_one_msg = fsl_espi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_espi_remove; + + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (!mpc8xxx_spi->reg_base) { + ret = -ENOMEM; + goto err_probe; + } + + reg_base = mpc8xxx_spi->reg_base; + + /* Register for SPI Interrupt */ + ret = request_irq(mpc8xxx_spi->irq, fsl_espi_irq, + 0, "fsl_espi", mpc8xxx_spi); + if (ret) + goto free_irq; + + if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { + mpc8xxx_spi->rx_shift = 16; + mpc8xxx_spi->tx_shift = 24; + } + + /* SPI controller initializations */ + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); + + /* Init eSPI CS mode register */ + for (i = 0; i < pdata->max_chipselect; i++) + mpc8xxx_spi_write_reg(®_base->csmode[i], CSMODE_INIT_VAL); + + /* Enable SPI interface */ + regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; + + mpc8xxx_spi_write_reg(®_base->mode, regval); + + ret = spi_register_master(master); + if (ret < 0) + goto unreg_master; + + dev_info(dev, "at 0x%p (irq = %d)\n", reg_base, mpc8xxx_spi->irq); + + return master; + +unreg_master: + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); +free_irq: + iounmap(mpc8xxx_spi->reg_base); +err_probe: + spi_master_put(master); +err: + return ERR_PTR(ret); +} + +static int of_fsl_espi_get_chipselects(struct device *dev) +{ + struct device_node *np = dev->of_node; + struct fsl_spi_platform_data *pdata = dev->platform_data; + const u32 *prop; + int len; + + prop = of_get_property(np, "fsl,espi-num-chipselects", &len); + if (!prop || len < sizeof(*prop)) { + dev_err(dev, "No 'fsl,espi-num-chipselects' property\n"); + return -EINVAL; + } + + pdata->max_chipselect = *prop; + pdata->cs_control = NULL; + + return 0; +} + +static int __devinit of_fsl_espi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct spi_master *master; + struct resource mem; + struct resource irq; + int ret = -ENOMEM; + + ret = of_mpc8xxx_spi_probe(ofdev, ofid); + if (ret) + return ret; + + ret = of_fsl_espi_get_chipselects(dev); + if (ret) + goto err; + + ret = of_address_to_resource(np, 0, &mem); + if (ret) + goto err; + + ret = of_irq_to_resource(np, 0, &irq); + if (!ret) { + ret = -EINVAL; + goto err; + } + + master = fsl_espi_probe(dev, &mem, irq.start); + if (IS_ERR(master)) { + ret = PTR_ERR(master); + goto err; + } + + return 0; + +err: + return ret; +} + +static int __devexit of_fsl_espi_remove(struct platform_device *dev) +{ + return mpc8xxx_spi_remove(&dev->dev); +} + +static const struct of_device_id of_fsl_espi_match[] = { + { .compatible = "fsl,mpc8536-espi" }, + {} +}; +MODULE_DEVICE_TABLE(of, of_fsl_espi_match); + +static struct of_platform_driver fsl_espi_driver = { + .driver = { + .name = "fsl_espi", + .owner = THIS_MODULE, + .of_match_table = of_fsl_espi_match, + }, + .probe = of_fsl_espi_probe, + .remove = __devexit_p(of_fsl_espi_remove), +}; + +static int __init fsl_espi_init(void) +{ + return of_register_platform_driver(&fsl_espi_driver); +} +module_init(fsl_espi_init); + +static void __exit fsl_espi_exit(void) +{ + of_unregister_platform_driver(&fsl_espi_driver); +} +module_exit(fsl_espi_exit); + +MODULE_AUTHOR("Mingkai Hu"); +MODULE_DESCRIPTION("Enhanced Freescale SPI Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_fsl_lib.c b/drivers/spi/spi_fsl_lib.c new file mode 100644 index 000000000000..5cd741fdb5c3 --- /dev/null +++ b/drivers/spi/spi_fsl_lib.c @@ -0,0 +1,237 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * Copyright 2010 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/fsl_devices.h> +#include <linux/dma-mapping.h> +#include <linux/mm.h> +#include <linux/of_platform.h> +#include <linux/of_spi.h> +#include <sysdev/fsl_soc.h> + +#include "spi_fsl_lib.h" + +#define MPC8XXX_SPI_RX_BUF(type) \ +void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + type *rx = mpc8xxx_spi->rx; \ + *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ + mpc8xxx_spi->rx = rx; \ +} + +#define MPC8XXX_SPI_TX_BUF(type) \ +u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ +{ \ + u32 data; \ + const type *tx = mpc8xxx_spi->tx; \ + if (!tx) \ + return 0; \ + data = *tx++ << mpc8xxx_spi->tx_shift; \ + mpc8xxx_spi->tx = tx; \ + return data; \ +} + +MPC8XXX_SPI_RX_BUF(u8) +MPC8XXX_SPI_RX_BUF(u16) +MPC8XXX_SPI_RX_BUF(u32) +MPC8XXX_SPI_TX_BUF(u8) +MPC8XXX_SPI_TX_BUF(u16) +MPC8XXX_SPI_TX_BUF(u32) + +struct mpc8xxx_spi_probe_info *to_of_pinfo(struct fsl_spi_platform_data *pdata) +{ + return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); +} + +void mpc8xxx_spi_work(struct work_struct *work) +{ + struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, + work); + + spin_lock_irq(&mpc8xxx_spi->lock); + while (!list_empty(&mpc8xxx_spi->queue)) { + struct spi_message *m = container_of(mpc8xxx_spi->queue.next, + struct spi_message, queue); + + list_del_init(&m->queue); + spin_unlock_irq(&mpc8xxx_spi->lock); + + if (mpc8xxx_spi->spi_do_one_msg) + mpc8xxx_spi->spi_do_one_msg(m); + + spin_lock_irq(&mpc8xxx_spi->lock); + } + spin_unlock_irq(&mpc8xxx_spi->lock); +} + +int mpc8xxx_spi_transfer(struct spi_device *spi, + struct spi_message *m) +{ + struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + unsigned long flags; + + m->actual_length = 0; + m->status = -EINPROGRESS; + + spin_lock_irqsave(&mpc8xxx_spi->lock, flags); + list_add_tail(&m->queue, &mpc8xxx_spi->queue); + queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); + spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + + return 0; +} + +void mpc8xxx_spi_cleanup(struct spi_device *spi) +{ + kfree(spi->controller_state); +} + +const char *mpc8xxx_spi_strmode(unsigned int flags) +{ + if (flags & SPI_QE_CPU_MODE) { + return "QE CPU"; + } else if (flags & SPI_CPM_MODE) { + if (flags & SPI_QE) + return "QE"; + else if (flags & SPI_CPM2) + return "CPM2"; + else + return "CPM1"; + } + return "CPU"; +} + +int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq) +{ + struct fsl_spi_platform_data *pdata = dev->platform_data; + struct spi_master *master; + struct mpc8xxx_spi *mpc8xxx_spi; + int ret = 0; + + master = dev_get_drvdata(dev); + + /* the spi->mode bits understood by this driver: */ + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH + | SPI_LSB_FIRST | SPI_LOOP; + + master->transfer = mpc8xxx_spi_transfer; + master->cleanup = mpc8xxx_spi_cleanup; + master->dev.of_node = dev->of_node; + + mpc8xxx_spi = spi_master_get_devdata(master); + mpc8xxx_spi->dev = dev; + mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; + mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; + mpc8xxx_spi->flags = pdata->flags; + mpc8xxx_spi->spibrg = pdata->sysclk; + mpc8xxx_spi->irq = irq; + + mpc8xxx_spi->rx_shift = 0; + mpc8xxx_spi->tx_shift = 0; + + init_completion(&mpc8xxx_spi->done); + + master->bus_num = pdata->bus_num; + master->num_chipselect = pdata->max_chipselect; + + spin_lock_init(&mpc8xxx_spi->lock); + init_completion(&mpc8xxx_spi->done); + INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); + INIT_LIST_HEAD(&mpc8xxx_spi->queue); + + mpc8xxx_spi->workqueue = create_singlethread_workqueue( + dev_name(master->dev.parent)); + if (mpc8xxx_spi->workqueue == NULL) { + ret = -EBUSY; + goto err; + } + + return 0; + +err: + return ret; +} + +int __devexit mpc8xxx_spi_remove(struct device *dev) +{ + struct mpc8xxx_spi *mpc8xxx_spi; + struct spi_master *master; + + master = dev_get_drvdata(dev); + mpc8xxx_spi = spi_master_get_devdata(master); + + flush_workqueue(mpc8xxx_spi->workqueue); + destroy_workqueue(mpc8xxx_spi->workqueue); + spi_unregister_master(master); + + free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); + + if (mpc8xxx_spi->spi_remove) + mpc8xxx_spi->spi_remove(mpc8xxx_spi); + + return 0; +} + +int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *np = ofdev->dev.of_node; + struct mpc8xxx_spi_probe_info *pinfo; + struct fsl_spi_platform_data *pdata; + const void *prop; + int ret = -ENOMEM; + + pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); + if (!pinfo) + return -ENOMEM; + + pdata = &pinfo->pdata; + dev->platform_data = pdata; + + /* Allocate bus num dynamically. */ + pdata->bus_num = -1; + + /* SPI controller is either clocked from QE or SoC clock. */ + pdata->sysclk = get_brgfreq(); + if (pdata->sysclk == -1) { + pdata->sysclk = fsl_get_sys_freq(); + if (pdata->sysclk == -1) { + ret = -ENODEV; + goto err; + } + } + + prop = of_get_property(np, "mode", NULL); + if (prop && !strcmp(prop, "cpu-qe")) + pdata->flags = SPI_QE_CPU_MODE; + else if (prop && !strcmp(prop, "qe")) + pdata->flags = SPI_CPM_MODE | SPI_QE; + else if (of_device_is_compatible(np, "fsl,cpm2-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM2; + else if (of_device_is_compatible(np, "fsl,cpm1-spi")) + pdata->flags = SPI_CPM_MODE | SPI_CPM1; + + return 0; + +err: + kfree(pinfo); + return ret; +} diff --git a/drivers/spi/spi_fsl_lib.h b/drivers/spi/spi_fsl_lib.h new file mode 100644 index 000000000000..281e060977cd --- /dev/null +++ b/drivers/spi/spi_fsl_lib.h @@ -0,0 +1,124 @@ +/* + * Freescale SPI/eSPI controller driver library. + * + * Maintainer: Kumar Gala + * + * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright (C) 2006 Polycom, Inc. + * + * CPM SPI and QE buffer descriptors mode support: + * Copyright (c) 2009 MontaVista Software, Inc. + * Author: Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#ifndef __SPI_FSL_LIB_H__ +#define __SPI_FSL_LIB_H__ + +#include <asm/io.h> + +/* SPI/eSPI Controller driver's private data. */ +struct mpc8xxx_spi { + struct device *dev; + void *reg_base; + + /* rx & tx bufs from the spi_transfer */ + const void *tx; + void *rx; +#ifdef CONFIG_SPI_FSL_ESPI + int len; +#endif + + int subblock; + struct spi_pram __iomem *pram; + struct cpm_buf_desc __iomem *tx_bd; + struct cpm_buf_desc __iomem *rx_bd; + + struct spi_transfer *xfer_in_progress; + + /* dma addresses for CPM transfers */ + dma_addr_t tx_dma; + dma_addr_t rx_dma; + bool map_tx_dma; + bool map_rx_dma; + + dma_addr_t dma_dummy_tx; + dma_addr_t dma_dummy_rx; + + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32(*get_tx) (struct mpc8xxx_spi *); + + /* hooks for different controller driver */ + void (*spi_do_one_msg) (struct spi_message *m); + void (*spi_remove) (struct mpc8xxx_spi *mspi); + + unsigned int count; + unsigned int irq; + + unsigned nsecs; /* (clock cycle time)/2 */ + + u32 spibrg; /* SPIBRG input clock */ + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + + unsigned int flags; + + struct workqueue_struct *workqueue; + struct work_struct work; + + struct list_head queue; + spinlock_t lock; + + struct completion done; +}; + +struct spi_mpc8xxx_cs { + /* functions to deal with different sized buffers */ + void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); + u32 (*get_tx) (struct mpc8xxx_spi *); + u32 rx_shift; /* RX data reg shift when in qe mode */ + u32 tx_shift; /* TX data reg shift when in qe mode */ + u32 hw_mode; /* Holds HW mode register settings */ +}; + +static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) +{ + out_be32(reg, val); +} + +static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) +{ + return in_be32(reg); +} + +struct mpc8xxx_spi_probe_info { + struct fsl_spi_platform_data pdata; + int *gpios; + bool *alow_flags; +}; + +extern u32 mpc8xxx_spi_tx_buf_u8(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u16(struct mpc8xxx_spi *mpc8xxx_spi); +extern u32 mpc8xxx_spi_tx_buf_u32(struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u8(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u16(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); +extern void mpc8xxx_spi_rx_buf_u32(u32 data, struct mpc8xxx_spi *mpc8xxx_spi); + +extern struct mpc8xxx_spi_probe_info *to_of_pinfo( + struct fsl_spi_platform_data *pdata); +extern int mpc8xxx_spi_bufs(struct mpc8xxx_spi *mspi, + struct spi_transfer *t, unsigned int len); +extern int mpc8xxx_spi_transfer(struct spi_device *spi, struct spi_message *m); +extern void mpc8xxx_spi_cleanup(struct spi_device *spi); +extern const char *mpc8xxx_spi_strmode(unsigned int flags); +extern int mpc8xxx_spi_probe(struct device *dev, struct resource *mem, + unsigned int irq); +extern int mpc8xxx_spi_remove(struct device *dev); +extern int of_mpc8xxx_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid); + +#endif /* __SPI_FSL_LIB_H__ */ diff --git a/drivers/spi/spi_mpc8xxx.c b/drivers/spi/spi_fsl_spi.c index 1dd86b835cd8..7ca52d3ae8f8 100644 --- a/drivers/spi/spi_mpc8xxx.c +++ b/drivers/spi/spi_fsl_spi.c @@ -1,9 +1,10 @@ /* - * MPC8xxx SPI controller driver. + * Freescale SPI controller driver. * * Maintainer: Kumar Gala * * Copyright (C) 2006 Polycom, Inc. + * Copyright 2010 Freescale Semiconductor, Inc. * * CPM SPI and QE buffer descriptors mode support: * Copyright (c) 2009 MontaVista Software, Inc. @@ -15,18 +16,11 @@ * option) any later version. */ #include <linux/module.h> -#include <linux/init.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/bug.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/completion.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/irq.h> -#include <linux/device.h> #include <linux/spi/spi.h> #include <linux/spi/spi_bitbang.h> #include <linux/platform_device.h> @@ -38,12 +32,12 @@ #include <linux/of_platform.h> #include <linux/gpio.h> #include <linux/of_gpio.h> -#include <linux/slab.h> #include <sysdev/fsl_soc.h> #include <asm/cpm.h> #include <asm/qe.h> -#include <asm/irq.h> + +#include "spi_fsl_lib.h" /* CPM1 and CPM2 are mutually exclusive. */ #ifdef CONFIG_CPM1 @@ -55,7 +49,7 @@ #endif /* SPI Controller registers */ -struct mpc8xxx_spi_reg { +struct fsl_spi_reg { u8 res1[0x20]; __be32 mode; __be32 event; @@ -80,7 +74,7 @@ struct mpc8xxx_spi_reg { /* * Default for SPI Mode: - * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk + * SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk */ #define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \ SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf)) @@ -102,112 +96,16 @@ struct mpc8xxx_spi_reg { #define SPI_PRAM_SIZE 0x100 #define SPI_MRBLR ((unsigned int)PAGE_SIZE) -/* SPI Controller driver's private data. */ -struct mpc8xxx_spi { - struct device *dev; - struct mpc8xxx_spi_reg __iomem *base; - - /* rx & tx bufs from the spi_transfer */ - const void *tx; - void *rx; - - int subblock; - struct spi_pram __iomem *pram; - struct cpm_buf_desc __iomem *tx_bd; - struct cpm_buf_desc __iomem *rx_bd; - - struct spi_transfer *xfer_in_progress; - - /* dma addresses for CPM transfers */ - dma_addr_t tx_dma; - dma_addr_t rx_dma; - bool map_tx_dma; - bool map_rx_dma; - - dma_addr_t dma_dummy_tx; - dma_addr_t dma_dummy_rx; - - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32(*get_tx) (struct mpc8xxx_spi *); - - unsigned int count; - unsigned int irq; - - unsigned nsecs; /* (clock cycle time)/2 */ - - u32 spibrg; /* SPIBRG input clock */ - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - - unsigned int flags; - - struct workqueue_struct *workqueue; - struct work_struct work; - - struct list_head queue; - spinlock_t lock; - - struct completion done; -}; - -static void *mpc8xxx_dummy_rx; -static DEFINE_MUTEX(mpc8xxx_dummy_rx_lock); -static int mpc8xxx_dummy_rx_refcnt; - -struct spi_mpc8xxx_cs { - /* functions to deal with different sized buffers */ - void (*get_rx) (u32 rx_data, struct mpc8xxx_spi *); - u32 (*get_tx) (struct mpc8xxx_spi *); - u32 rx_shift; /* RX data reg shift when in qe mode */ - u32 tx_shift; /* TX data reg shift when in qe mode */ - u32 hw_mode; /* Holds HW mode register settings */ -}; - -static inline void mpc8xxx_spi_write_reg(__be32 __iomem *reg, u32 val) -{ - out_be32(reg, val); -} - -static inline u32 mpc8xxx_spi_read_reg(__be32 __iomem *reg) -{ - return in_be32(reg); -} - -#define MPC83XX_SPI_RX_BUF(type) \ -static \ -void mpc8xxx_spi_rx_buf_##type(u32 data, struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - type *rx = mpc8xxx_spi->rx; \ - *rx++ = (type)(data >> mpc8xxx_spi->rx_shift); \ - mpc8xxx_spi->rx = rx; \ -} - -#define MPC83XX_SPI_TX_BUF(type) \ -static \ -u32 mpc8xxx_spi_tx_buf_##type(struct mpc8xxx_spi *mpc8xxx_spi) \ -{ \ - u32 data; \ - const type *tx = mpc8xxx_spi->tx; \ - if (!tx) \ - return 0; \ - data = *tx++ << mpc8xxx_spi->tx_shift; \ - mpc8xxx_spi->tx = tx; \ - return data; \ -} +static void *fsl_dummy_rx; +static DEFINE_MUTEX(fsl_dummy_rx_lock); +static int fsl_dummy_rx_refcnt; -MPC83XX_SPI_RX_BUF(u8) -MPC83XX_SPI_RX_BUF(u16) -MPC83XX_SPI_RX_BUF(u32) -MPC83XX_SPI_TX_BUF(u8) -MPC83XX_SPI_TX_BUF(u16) -MPC83XX_SPI_TX_BUF(u32) - -static void mpc8xxx_spi_change_mode(struct spi_device *spi) +static void fsl_spi_change_mode(struct spi_device *spi) { struct mpc8xxx_spi *mspi = spi_master_get_devdata(spi->master); struct spi_mpc8xxx_cs *cs = spi->controller_state; - __be32 __iomem *mode = &mspi->base->mode; + struct fsl_spi_reg *reg_base = mspi->reg_base; + __be32 __iomem *mode = ®_base->mode; unsigned long flags; if (cs->hw_mode == mpc8xxx_spi_read_reg(mode)) @@ -238,7 +136,7 @@ static void mpc8xxx_spi_change_mode(struct spi_device *spi) local_irq_restore(flags); } -static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) +static void fsl_spi_chipselect(struct spi_device *spi, int value) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); struct fsl_spi_platform_data *pdata = spi->dev.parent->platform_data; @@ -256,18 +154,17 @@ static void mpc8xxx_spi_chipselect(struct spi_device *spi, int value) mpc8xxx_spi->get_rx = cs->get_rx; mpc8xxx_spi->get_tx = cs->get_tx; - mpc8xxx_spi_change_mode(spi); + fsl_spi_change_mode(spi); if (pdata->cs_control) pdata->cs_control(spi, pol); } } -static int -mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - struct mpc8xxx_spi *mpc8xxx_spi, - int bits_per_word) +static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + struct mpc8xxx_spi *mpc8xxx_spi, + int bits_per_word) { cs->rx_shift = 0; cs->tx_shift = 0; @@ -307,10 +204,9 @@ mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static int -mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - int bits_per_word) +static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, + struct spi_device *spi, + int bits_per_word) { /* QE uses Little Endian for words > 8 * so transform all words > 8 into 8 bits @@ -326,13 +222,13 @@ mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static -int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) +static int fsl_spi_setup_transfer(struct spi_device *spi, + struct spi_transfer *t) { struct mpc8xxx_spi *mpc8xxx_spi; - int bits_per_word; + int bits_per_word = 0; u8 pm; - u32 hz; + u32 hz = 0; struct spi_mpc8xxx_cs *cs = spi->controller_state; mpc8xxx_spi = spi_master_get_devdata(spi->master); @@ -340,9 +236,6 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) if (t) { bits_per_word = t->bits_per_word; hz = t->speed_hz; - } else { - bits_per_word = 0; - hz = 0; } /* spi_transfer level calls that work per-word */ @@ -388,23 +281,25 @@ int mpc8xxx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) hz, mpc8xxx_spi->spibrg / 1024); if (pm > 16) pm = 16; - } else + } else { pm = (mpc8xxx_spi->spibrg - 1) / (hz * 4) + 1; + } if (pm) pm--; cs->hw_mode |= SPMODE_PM(pm); - mpc8xxx_spi_change_mode(spi); + fsl_spi_change_mode(spi); return 0; } -static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) { struct cpm_buf_desc __iomem *tx_bd = mspi->tx_bd; struct cpm_buf_desc __iomem *rx_bd = mspi->rx_bd; unsigned int xfer_len = min(mspi->count, SPI_MRBLR); unsigned int xfer_ofs; + struct fsl_spi_reg *reg_base = mspi->reg_base; xfer_ofs = mspi->xfer_in_progress->len - mspi->count; @@ -424,13 +319,14 @@ static void mpc8xxx_spi_cpm_bufs_start(struct mpc8xxx_spi *mspi) BD_SC_LAST); /* start transfer */ - mpc8xxx_spi_write_reg(&mspi->base->command, SPCOM_STR); + mpc8xxx_spi_write_reg(®_base->command, SPCOM_STR); } -static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, +static int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, bool is_dma_mapped) { struct device *dev = mspi->dev; + struct fsl_spi_reg *reg_base = mspi->reg_base; if (is_dma_mapped) { mspi->map_tx_dma = 0; @@ -475,13 +371,13 @@ static int mpc8xxx_spi_cpm_bufs(struct mpc8xxx_spi *mspi, } /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIE_RXB); + mpc8xxx_spi_write_reg(®_base->mask, SPIE_RXB); mspi->xfer_in_progress = t; mspi->count = t->len; /* start CPM transfers */ - mpc8xxx_spi_cpm_bufs_start(mspi); + fsl_spi_cpm_bufs_start(mspi); return 0; @@ -491,7 +387,7 @@ err_rx_dma: return -ENOMEM; } -static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct spi_transfer *t = mspi->xfer_in_progress; @@ -503,31 +399,34 @@ static void mpc8xxx_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) mspi->xfer_in_progress = NULL; } -static int mpc8xxx_spi_cpu_bufs(struct mpc8xxx_spi *mspi, +static int fsl_spi_cpu_bufs(struct mpc8xxx_spi *mspi, struct spi_transfer *t, unsigned int len) { u32 word; + struct fsl_spi_reg *reg_base = mspi->reg_base; mspi->count = len; /* enable rx ints */ - mpc8xxx_spi_write_reg(&mspi->base->mask, SPIM_NE); + mpc8xxx_spi_write_reg(®_base->mask, SPIM_NE); /* transmit word */ word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + mpc8xxx_spi_write_reg(®_base->transmit, word); return 0; } -static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, +static int fsl_spi_bufs(struct spi_device *spi, struct spi_transfer *t, bool is_dma_mapped) { struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); + struct fsl_spi_reg *reg_base; unsigned int len = t->len; u8 bits_per_word; int ret; + reg_base = mpc8xxx_spi->reg_base; bits_per_word = spi->bits_per_word; if (t->bits_per_word) bits_per_word = t->bits_per_word; @@ -551,24 +450,24 @@ static int mpc8xxx_spi_bufs(struct spi_device *spi, struct spi_transfer *t, INIT_COMPLETION(mpc8xxx_spi->done); if (mpc8xxx_spi->flags & SPI_CPM_MODE) - ret = mpc8xxx_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); + ret = fsl_spi_cpm_bufs(mpc8xxx_spi, t, is_dma_mapped); else - ret = mpc8xxx_spi_cpu_bufs(mpc8xxx_spi, t, len); + ret = fsl_spi_cpu_bufs(mpc8xxx_spi, t, len); if (ret) return ret; wait_for_completion(&mpc8xxx_spi->done); /* disable rx ints */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); if (mpc8xxx_spi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_bufs_complete(mpc8xxx_spi); + fsl_spi_cpm_bufs_complete(mpc8xxx_spi); return mpc8xxx_spi->count; } -static void mpc8xxx_spi_do_one_msg(struct spi_message *m) +static void fsl_spi_do_one_msg(struct spi_message *m) { struct spi_device *spi = m->spi; struct spi_transfer *t; @@ -584,18 +483,18 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) status = -EINVAL; if (cs_change) - status = mpc8xxx_spi_setup_transfer(spi, t); + status = fsl_spi_setup_transfer(spi, t); if (status < 0) break; } if (cs_change) { - mpc8xxx_spi_chipselect(spi, BITBANG_CS_ACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_ACTIVE); ndelay(nsecs); } cs_change = t->cs_change; if (t->len) - status = mpc8xxx_spi_bufs(spi, t, m->is_dma_mapped); + status = fsl_spi_bufs(spi, t, m->is_dma_mapped); if (status) { status = -EMSGSIZE; break; @@ -607,7 +506,7 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) if (cs_change) { ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); ndelay(nsecs); } } @@ -617,35 +516,16 @@ static void mpc8xxx_spi_do_one_msg(struct spi_message *m) if (status || !cs_change) { ndelay(nsecs); - mpc8xxx_spi_chipselect(spi, BITBANG_CS_INACTIVE); + fsl_spi_chipselect(spi, BITBANG_CS_INACTIVE); } - mpc8xxx_spi_setup_transfer(spi, NULL); -} - -static void mpc8xxx_spi_work(struct work_struct *work) -{ - struct mpc8xxx_spi *mpc8xxx_spi = container_of(work, struct mpc8xxx_spi, - work); - - spin_lock_irq(&mpc8xxx_spi->lock); - while (!list_empty(&mpc8xxx_spi->queue)) { - struct spi_message *m = container_of(mpc8xxx_spi->queue.next, - struct spi_message, queue); - - list_del_init(&m->queue); - spin_unlock_irq(&mpc8xxx_spi->lock); - - mpc8xxx_spi_do_one_msg(m); - - spin_lock_irq(&mpc8xxx_spi->lock); - } - spin_unlock_irq(&mpc8xxx_spi->lock); + fsl_spi_setup_transfer(spi, NULL); } -static int mpc8xxx_spi_setup(struct spi_device *spi) +static int fsl_spi_setup(struct spi_device *spi) { struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; int retval; u32 hw_mode; struct spi_mpc8xxx_cs *cs = spi->controller_state; @@ -661,8 +541,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) } mpc8xxx_spi = spi_master_get_devdata(spi->master); + reg_base = mpc8xxx_spi->reg_base; + hw_mode = cs->hw_mode; /* Save original settings */ - cs->hw_mode = mpc8xxx_spi_read_reg(&mpc8xxx_spi->base->mode); + cs->hw_mode = mpc8xxx_spi_read_reg(®_base->mode); /* mask out bits we are going to set */ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH | SPMODE_REV | SPMODE_LOOP); @@ -676,7 +558,7 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) if (spi->mode & SPI_LOOP) cs->hw_mode |= SPMODE_LOOP; - retval = mpc8xxx_spi_setup_transfer(spi, NULL); + retval = fsl_spi_setup_transfer(spi, NULL); if (retval < 0) { cs->hw_mode = hw_mode; /* Restore settings */ return retval; @@ -684,9 +566,10 @@ static int mpc8xxx_spi_setup(struct spi_device *spi) return 0; } -static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) +static void fsl_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) { u16 len; + struct fsl_spi_reg *reg_base = mspi->reg_base; dev_dbg(mspi->dev, "%s: bd datlen %d, count %d\n", __func__, in_be16(&mspi->rx_bd->cbd_datlen), mspi->count); @@ -698,20 +581,22 @@ static void mpc8xxx_spi_cpm_irq(struct mpc8xxx_spi *mspi, u32 events) } /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); + mpc8xxx_spi_write_reg(®_base->event, events); mspi->count -= len; if (mspi->count) - mpc8xxx_spi_cpm_bufs_start(mspi); + fsl_spi_cpm_bufs_start(mspi); else complete(&mspi->done); } -static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) +static void fsl_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) { + struct fsl_spi_reg *reg_base = mspi->reg_base; + /* We need handle RX first */ if (events & SPIE_NE) { - u32 rx_data = mpc8xxx_spi_read_reg(&mspi->base->receive); + u32 rx_data = mpc8xxx_spi_read_reg(®_base->receive); if (mspi->rx) mspi->get_rx(rx_data, mspi); @@ -720,102 +605,80 @@ static void mpc8xxx_spi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events) if ((events & SPIE_NF) == 0) /* spin until TX is done */ while (((events = - mpc8xxx_spi_read_reg(&mspi->base->event)) & + mpc8xxx_spi_read_reg(®_base->event)) & SPIE_NF) == 0) cpu_relax(); /* Clear the events */ - mpc8xxx_spi_write_reg(&mspi->base->event, events); + mpc8xxx_spi_write_reg(®_base->event, events); mspi->count -= 1; if (mspi->count) { u32 word = mspi->get_tx(mspi); - mpc8xxx_spi_write_reg(&mspi->base->transmit, word); + mpc8xxx_spi_write_reg(®_base->transmit, word); } else { complete(&mspi->done); } } -static irqreturn_t mpc8xxx_spi_irq(s32 irq, void *context_data) +static irqreturn_t fsl_spi_irq(s32 irq, void *context_data) { struct mpc8xxx_spi *mspi = context_data; irqreturn_t ret = IRQ_NONE; u32 events; + struct fsl_spi_reg *reg_base = mspi->reg_base; /* Get interrupt events(tx/rx) */ - events = mpc8xxx_spi_read_reg(&mspi->base->event); + events = mpc8xxx_spi_read_reg(®_base->event); if (events) ret = IRQ_HANDLED; dev_dbg(mspi->dev, "%s: events %x\n", __func__, events); if (mspi->flags & SPI_CPM_MODE) - mpc8xxx_spi_cpm_irq(mspi, events); + fsl_spi_cpm_irq(mspi, events); else - mpc8xxx_spi_cpu_irq(mspi, events); + fsl_spi_cpu_irq(mspi, events); return ret; } -static int mpc8xxx_spi_transfer(struct spi_device *spi, - struct spi_message *m) +static void *fsl_spi_alloc_dummy_rx(void) { - struct mpc8xxx_spi *mpc8xxx_spi = spi_master_get_devdata(spi->master); - unsigned long flags; + mutex_lock(&fsl_dummy_rx_lock); - m->actual_length = 0; - m->status = -EINPROGRESS; + if (!fsl_dummy_rx) + fsl_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); + if (fsl_dummy_rx) + fsl_dummy_rx_refcnt++; - spin_lock_irqsave(&mpc8xxx_spi->lock, flags); - list_add_tail(&m->queue, &mpc8xxx_spi->queue); - queue_work(mpc8xxx_spi->workqueue, &mpc8xxx_spi->work); - spin_unlock_irqrestore(&mpc8xxx_spi->lock, flags); + mutex_unlock(&fsl_dummy_rx_lock); - return 0; + return fsl_dummy_rx; } - -static void mpc8xxx_spi_cleanup(struct spi_device *spi) +static void fsl_spi_free_dummy_rx(void) { - kfree(spi->controller_state); -} + mutex_lock(&fsl_dummy_rx_lock); -static void *mpc8xxx_spi_alloc_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - if (!mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx = kmalloc(SPI_MRBLR, GFP_KERNEL); - if (mpc8xxx_dummy_rx) - mpc8xxx_dummy_rx_refcnt++; - - mutex_unlock(&mpc8xxx_dummy_rx_lock); - - return mpc8xxx_dummy_rx; -} - -static void mpc8xxx_spi_free_dummy_rx(void) -{ - mutex_lock(&mpc8xxx_dummy_rx_lock); - - switch (mpc8xxx_dummy_rx_refcnt) { + switch (fsl_dummy_rx_refcnt) { case 0: WARN_ON(1); break; case 1: - kfree(mpc8xxx_dummy_rx); - mpc8xxx_dummy_rx = NULL; + kfree(fsl_dummy_rx); + fsl_dummy_rx = NULL; /* fall through */ default: - mpc8xxx_dummy_rx_refcnt--; + fsl_dummy_rx_refcnt--; break; } - mutex_unlock(&mpc8xxx_dummy_rx_lock); + mutex_unlock(&fsl_dummy_rx_lock); } -static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) +static unsigned long fsl_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct device_node *np = dev->of_node; @@ -869,7 +732,7 @@ static unsigned long mpc8xxx_spi_cpm_get_pram(struct mpc8xxx_spi *mspi) return pram_ofs; } -static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) +static int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; struct device_node *np = dev->of_node; @@ -881,7 +744,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) if (!(mspi->flags & SPI_CPM_MODE)) return 0; - if (!mpc8xxx_spi_alloc_dummy_rx()) + if (!fsl_spi_alloc_dummy_rx()) return -ENOMEM; if (mspi->flags & SPI_QE) { @@ -902,7 +765,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) } } - pram_ofs = mpc8xxx_spi_cpm_get_pram(mspi); + pram_ofs = fsl_spi_cpm_get_pram(mspi); if (IS_ERR_VALUE(pram_ofs)) { dev_err(dev, "can't allocate spi parameter ram\n"); goto err_pram; @@ -922,7 +785,7 @@ static int mpc8xxx_spi_cpm_init(struct mpc8xxx_spi *mspi) goto err_dummy_tx; } - mspi->dma_dummy_rx = dma_map_single(dev, mpc8xxx_dummy_rx, SPI_MRBLR, + mspi->dma_dummy_rx = dma_map_single(dev, fsl_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); if (dma_mapping_error(dev, mspi->dma_dummy_rx)) { dev_err(dev, "unable to map dummy rx buffer\n"); @@ -960,11 +823,11 @@ err_dummy_tx: err_bds: cpm_muram_free(pram_ofs); err_pram: - mpc8xxx_spi_free_dummy_rx(); + fsl_spi_free_dummy_rx(); return -ENOMEM; } -static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) +static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; @@ -972,30 +835,22 @@ static void mpc8xxx_spi_cpm_free(struct mpc8xxx_spi *mspi) dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); cpm_muram_free(cpm_muram_offset(mspi->pram)); - mpc8xxx_spi_free_dummy_rx(); + fsl_spi_free_dummy_rx(); } -static const char *mpc8xxx_spi_strmode(unsigned int flags) +static void fsl_spi_remove(struct mpc8xxx_spi *mspi) { - if (flags & SPI_QE_CPU_MODE) { - return "QE CPU"; - } else if (flags & SPI_CPM_MODE) { - if (flags & SPI_QE) - return "QE"; - else if (flags & SPI_CPM2) - return "CPM2"; - else - return "CPM1"; - } - return "CPU"; + iounmap(mspi->reg_base); + fsl_spi_cpm_free(mspi); } -static struct spi_master * __devinit -mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) +static struct spi_master * __devinit fsl_spi_probe(struct device *dev, + struct resource *mem, unsigned int irq) { struct fsl_spi_platform_data *pdata = dev->platform_data; struct spi_master *master; struct mpc8xxx_spi *mpc8xxx_spi; + struct fsl_spi_reg *reg_base; u32 regval; int ret = 0; @@ -1007,132 +862,77 @@ mpc8xxx_spi_probe(struct device *dev, struct resource *mem, unsigned int irq) dev_set_drvdata(dev, master); - /* the spi->mode bits understood by this driver: */ - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH - | SPI_LSB_FIRST | SPI_LOOP; + ret = mpc8xxx_spi_probe(dev, mem, irq); + if (ret) + goto err_probe; - master->setup = mpc8xxx_spi_setup; - master->transfer = mpc8xxx_spi_transfer; - master->cleanup = mpc8xxx_spi_cleanup; - master->dev.of_node = dev->of_node; + master->setup = fsl_spi_setup; mpc8xxx_spi = spi_master_get_devdata(master); - mpc8xxx_spi->dev = dev; - mpc8xxx_spi->get_rx = mpc8xxx_spi_rx_buf_u8; - mpc8xxx_spi->get_tx = mpc8xxx_spi_tx_buf_u8; - mpc8xxx_spi->flags = pdata->flags; - mpc8xxx_spi->spibrg = pdata->sysclk; + mpc8xxx_spi->spi_do_one_msg = fsl_spi_do_one_msg; + mpc8xxx_spi->spi_remove = fsl_spi_remove; + - ret = mpc8xxx_spi_cpm_init(mpc8xxx_spi); + ret = fsl_spi_cpm_init(mpc8xxx_spi); if (ret) goto err_cpm_init; - mpc8xxx_spi->rx_shift = 0; - mpc8xxx_spi->tx_shift = 0; if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) { mpc8xxx_spi->rx_shift = 16; mpc8xxx_spi->tx_shift = 24; } - init_completion(&mpc8xxx_spi->done); - - mpc8xxx_spi->base = ioremap(mem->start, resource_size(mem)); - if (mpc8xxx_spi->base == NULL) { + mpc8xxx_spi->reg_base = ioremap(mem->start, resource_size(mem)); + if (mpc8xxx_spi->reg_base == NULL) { ret = -ENOMEM; goto err_ioremap; } - mpc8xxx_spi->irq = irq; - /* Register for SPI Interrupt */ - ret = request_irq(mpc8xxx_spi->irq, mpc8xxx_spi_irq, - 0, "mpc8xxx_spi", mpc8xxx_spi); + ret = request_irq(mpc8xxx_spi->irq, fsl_spi_irq, + 0, "fsl_spi", mpc8xxx_spi); if (ret != 0) - goto unmap_io; + goto free_irq; - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->max_chipselect; + reg_base = mpc8xxx_spi->reg_base; /* SPI controller initializations */ - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mask, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->command, 0); - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->event, 0xffffffff); + mpc8xxx_spi_write_reg(®_base->mode, 0); + mpc8xxx_spi_write_reg(®_base->mask, 0); + mpc8xxx_spi_write_reg(®_base->command, 0); + mpc8xxx_spi_write_reg(®_base->event, 0xffffffff); /* Enable SPI interface */ regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE; if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) regval |= SPMODE_OP; - mpc8xxx_spi_write_reg(&mpc8xxx_spi->base->mode, regval); - spin_lock_init(&mpc8xxx_spi->lock); - init_completion(&mpc8xxx_spi->done); - INIT_WORK(&mpc8xxx_spi->work, mpc8xxx_spi_work); - INIT_LIST_HEAD(&mpc8xxx_spi->queue); - - mpc8xxx_spi->workqueue = create_singlethread_workqueue( - dev_name(master->dev.parent)); - if (mpc8xxx_spi->workqueue == NULL) { - ret = -EBUSY; - goto free_irq; - } + mpc8xxx_spi_write_reg(®_base->mode, regval); ret = spi_register_master(master); if (ret < 0) goto unreg_master; - dev_info(dev, "at 0x%p (irq = %d), %s mode\n", mpc8xxx_spi->base, + dev_info(dev, "at 0x%p (irq = %d), %s mode\n", reg_base, mpc8xxx_spi->irq, mpc8xxx_spi_strmode(mpc8xxx_spi->flags)); return master; unreg_master: - destroy_workqueue(mpc8xxx_spi->workqueue); -free_irq: free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); -unmap_io: - iounmap(mpc8xxx_spi->base); +free_irq: + iounmap(mpc8xxx_spi->reg_base); err_ioremap: - mpc8xxx_spi_cpm_free(mpc8xxx_spi); + fsl_spi_cpm_free(mpc8xxx_spi); err_cpm_init: +err_probe: spi_master_put(master); err: return ERR_PTR(ret); } -static int __devexit mpc8xxx_spi_remove(struct device *dev) -{ - struct mpc8xxx_spi *mpc8xxx_spi; - struct spi_master *master; - - master = dev_get_drvdata(dev); - mpc8xxx_spi = spi_master_get_devdata(master); - - flush_workqueue(mpc8xxx_spi->workqueue); - destroy_workqueue(mpc8xxx_spi->workqueue); - spi_unregister_master(master); - - free_irq(mpc8xxx_spi->irq, mpc8xxx_spi); - iounmap(mpc8xxx_spi->base); - mpc8xxx_spi_cpm_free(mpc8xxx_spi); - - return 0; -} - -struct mpc8xxx_spi_probe_info { - struct fsl_spi_platform_data pdata; - int *gpios; - bool *alow_flags; -}; - -static struct mpc8xxx_spi_probe_info * -to_of_pinfo(struct fsl_spi_platform_data *pdata) -{ - return container_of(pdata, struct mpc8xxx_spi_probe_info, pdata); -} - -static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) +static void fsl_spi_cs_control(struct spi_device *spi, bool on) { struct device *dev = spi->dev.parent; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(dev->platform_data); @@ -1143,7 +943,7 @@ static void mpc8xxx_spi_cs_control(struct spi_device *spi, bool on) gpio_set_value(gpio, on ^ alow); } -static int of_mpc8xxx_spi_get_chipselects(struct device *dev) +static int of_fsl_spi_get_chipselects(struct device *dev) { struct device_node *np = dev->of_node; struct fsl_spi_platform_data *pdata = dev->platform_data; @@ -1204,7 +1004,7 @@ static int of_mpc8xxx_spi_get_chipselects(struct device *dev) } pdata->max_chipselect = ngpios; - pdata->cs_control = mpc8xxx_spi_cs_control; + pdata->cs_control = fsl_spi_cs_control; return 0; @@ -1223,7 +1023,7 @@ err_alloc_flags: return ret; } -static int of_mpc8xxx_spi_free_chipselects(struct device *dev) +static int of_fsl_spi_free_chipselects(struct device *dev) { struct fsl_spi_platform_data *pdata = dev->platform_data; struct mpc8xxx_spi_probe_info *pinfo = to_of_pinfo(pdata); @@ -1242,50 +1042,21 @@ static int of_mpc8xxx_spi_free_chipselects(struct device *dev) return 0; } -static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, - const struct of_device_id *ofid) +static int __devinit of_fsl_spi_probe(struct platform_device *ofdev, + const struct of_device_id *ofid) { struct device *dev = &ofdev->dev; struct device_node *np = ofdev->dev.of_node; - struct mpc8xxx_spi_probe_info *pinfo; - struct fsl_spi_platform_data *pdata; struct spi_master *master; struct resource mem; struct resource irq; - const void *prop; int ret = -ENOMEM; - pinfo = kzalloc(sizeof(*pinfo), GFP_KERNEL); - if (!pinfo) - return -ENOMEM; - - pdata = &pinfo->pdata; - dev->platform_data = pdata; - - /* Allocate bus num dynamically. */ - pdata->bus_num = -1; - - /* SPI controller is either clocked from QE or SoC clock. */ - pdata->sysclk = get_brgfreq(); - if (pdata->sysclk == -1) { - pdata->sysclk = fsl_get_sys_freq(); - if (pdata->sysclk == -1) { - ret = -ENODEV; - goto err_clk; - } - } + ret = of_mpc8xxx_spi_probe(ofdev, ofid); + if (ret) + return ret; - prop = of_get_property(np, "mode", NULL); - if (prop && !strcmp(prop, "cpu-qe")) - pdata->flags = SPI_QE_CPU_MODE; - else if (prop && !strcmp(prop, "qe")) - pdata->flags = SPI_CPM_MODE | SPI_QE; - else if (of_device_is_compatible(np, "fsl,cpm2-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM2; - else if (of_device_is_compatible(np, "fsl,cpm1-spi")) - pdata->flags = SPI_CPM_MODE | SPI_CPM1; - - ret = of_mpc8xxx_spi_get_chipselects(dev); + ret = of_fsl_spi_get_chipselects(dev); if (ret) goto err; @@ -1299,7 +1070,7 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, goto err; } - master = mpc8xxx_spi_probe(dev, &mem, irq.start); + master = fsl_spi_probe(dev, &mem, irq.start); if (IS_ERR(master)) { ret = PTR_ERR(master); goto err; @@ -1308,42 +1079,40 @@ static int __devinit of_mpc8xxx_spi_probe(struct platform_device *ofdev, return 0; err: - of_mpc8xxx_spi_free_chipselects(dev); -err_clk: - kfree(pinfo); + of_fsl_spi_free_chipselects(dev); return ret; } -static int __devexit of_mpc8xxx_spi_remove(struct platform_device *ofdev) +static int __devexit of_fsl_spi_remove(struct platform_device *ofdev) { int ret; ret = mpc8xxx_spi_remove(&ofdev->dev); if (ret) return ret; - of_mpc8xxx_spi_free_chipselects(&ofdev->dev); + of_fsl_spi_free_chipselects(&ofdev->dev); return 0; } -static const struct of_device_id of_mpc8xxx_spi_match[] = { +static const struct of_device_id of_fsl_spi_match[] = { { .compatible = "fsl,spi" }, - {}, + {} }; -MODULE_DEVICE_TABLE(of, of_mpc8xxx_spi_match); +MODULE_DEVICE_TABLE(of, of_fsl_spi_match); -static struct of_platform_driver of_mpc8xxx_spi_driver = { +static struct of_platform_driver of_fsl_spi_driver = { .driver = { - .name = "mpc8xxx_spi", + .name = "fsl_spi", .owner = THIS_MODULE, - .of_match_table = of_mpc8xxx_spi_match, + .of_match_table = of_fsl_spi_match, }, - .probe = of_mpc8xxx_spi_probe, - .remove = __devexit_p(of_mpc8xxx_spi_remove), + .probe = of_fsl_spi_probe, + .remove = __devexit_p(of_fsl_spi_remove), }; #ifdef CONFIG_MPC832x_RDB /* - * XXX XXX XXX + * XXX XXX XXX * This is "legacy" platform driver, was used by the MPC8323E-RDB boards * only. The driver should go away soon, since newer MPC8323E-RDB's device * tree can work with OpenFirmware driver. But for now we support old trees @@ -1366,7 +1135,7 @@ static int __devinit plat_mpc8xxx_spi_probe(struct platform_device *pdev) if (irq <= 0) return -EINVAL; - master = mpc8xxx_spi_probe(&pdev->dev, mem, irq); + master = fsl_spi_probe(&pdev->dev, mem, irq); if (IS_ERR(master)) return PTR_ERR(master); return 0; @@ -1405,21 +1174,20 @@ static void __init legacy_driver_register(void) {} static void __exit legacy_driver_unregister(void) {} #endif /* CONFIG_MPC832x_RDB */ -static int __init mpc8xxx_spi_init(void) +static int __init fsl_spi_init(void) { legacy_driver_register(); - return of_register_platform_driver(&of_mpc8xxx_spi_driver); + return of_register_platform_driver(&of_fsl_spi_driver); } +module_init(fsl_spi_init); -static void __exit mpc8xxx_spi_exit(void) +static void __exit fsl_spi_exit(void) { - of_unregister_platform_driver(&of_mpc8xxx_spi_driver); + of_unregister_platform_driver(&of_fsl_spi_driver); legacy_driver_unregister(); } - -module_init(mpc8xxx_spi_init); -module_exit(mpc8xxx_spi_exit); +module_exit(fsl_spi_exit); MODULE_AUTHOR("Kumar Gala"); -MODULE_DESCRIPTION("Simple MPC8xxx SPI Driver"); +MODULE_DESCRIPTION("Simple Freescale SPI Driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/spi/spi_s3c64xx.c b/drivers/spi/spi_s3c64xx.c index c3038da2648a..795828b90f45 100644 --- a/drivers/spi/spi_s3c64xx.c +++ b/drivers/spi/spi_s3c64xx.c @@ -261,15 +261,25 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - s3c2410_dma_config(sdd->tx_dmach, 1); + s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, xfer->tx_dma, xfer->len); s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); } else { - unsigned char *buf = (unsigned char *) xfer->tx_buf; - int i = 0; - while (i < xfer->len) - writeb(buf[i++], regs + S3C64XX_SPI_TX_DATA); + switch (sdd->cur_bpw) { + case 32: + iowrite32_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 4); + break; + case 16: + iowrite16_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len / 2); + break; + default: + iowrite8_rep(regs + S3C64XX_SPI_TX_DATA, + xfer->tx_buf, xfer->len); + break; + } } } @@ -286,7 +296,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - s3c2410_dma_config(sdd->rx_dmach, 1); + s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, xfer->rx_dma, xfer->len); s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); @@ -366,20 +376,26 @@ static int wait_for_xfer(struct s3c64xx_spi_driver_data *sdd, return -EIO; } } else { - unsigned char *buf; - int i; - /* If it was only Tx */ if (xfer->rx_buf == NULL) { sdd->state &= ~TXBUSY; return 0; } - i = 0; - buf = xfer->rx_buf; - while (i < xfer->len) - buf[i++] = readb(regs + S3C64XX_SPI_RX_DATA); - + switch (sdd->cur_bpw) { + case 32: + ioread32_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 4); + break; + case 16: + ioread16_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len / 2); + break; + default: + ioread8_rep(regs + S3C64XX_SPI_RX_DATA, + xfer->rx_buf, xfer->len); + break; + } sdd->state &= ~RXBUSY; } @@ -399,13 +415,18 @@ static inline void disable_cs(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; void __iomem *regs = sdd->regs; u32 val; /* Disable Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); + if (sci->clk_from_cmu) { + clk_disable(sdd->src_clk); + } else { + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } /* Set Polarity and Phase */ val = readl(regs + S3C64XX_SPI_CH_CFG); @@ -429,29 +450,39 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) switch (sdd->cur_bpw) { case 32: val |= S3C64XX_SPI_MODE_BUS_TSZ_WORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_WORD; break; case 16: val |= S3C64XX_SPI_MODE_BUS_TSZ_HALFWORD; + val |= S3C64XX_SPI_MODE_CH_TSZ_HALFWORD; break; default: val |= S3C64XX_SPI_MODE_BUS_TSZ_BYTE; + val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; break; } - val |= S3C64XX_SPI_MODE_CH_TSZ_BYTE; /* Always 8bits wide */ writel(val, regs + S3C64XX_SPI_MODE_CFG); - /* Configure Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val &= ~S3C64XX_SPI_PSR_MASK; - val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) - & S3C64XX_SPI_PSR_MASK); - writel(val, regs + S3C64XX_SPI_CLK_CFG); - - /* Enable Clock */ - val = readl(regs + S3C64XX_SPI_CLK_CFG); - val |= S3C64XX_SPI_ENCLK_ENABLE; - writel(val, regs + S3C64XX_SPI_CLK_CFG); + if (sci->clk_from_cmu) { + /* Configure Clock */ + /* There is half-multiplier before the SPI */ + clk_set_rate(sdd->src_clk, sdd->cur_speed * 2); + /* Enable Clock */ + clk_enable(sdd->src_clk); + } else { + /* Configure Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val &= ~S3C64XX_SPI_PSR_MASK; + val |= ((clk_get_rate(sdd->src_clk) / sdd->cur_speed / 2 - 1) + & S3C64XX_SPI_PSR_MASK); + writel(val, regs + S3C64XX_SPI_CLK_CFG); + + /* Enable Clock */ + val = readl(regs + S3C64XX_SPI_CLK_CFG); + val |= S3C64XX_SPI_ENCLK_ENABLE; + writel(val, regs + S3C64XX_SPI_CLK_CFG); + } } static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, @@ -499,6 +530,7 @@ static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct device *dev = &sdd->pdev->dev; struct spi_transfer *xfer; @@ -514,6 +546,9 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, /* Map until end or first fail */ list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + if (xfer->tx_buf != NULL) { xfer->tx_dma = dma_map_single(dev, (void *)xfer->tx_buf, xfer->len, @@ -545,6 +580,7 @@ static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, struct spi_message *msg) { + struct s3c64xx_spi_info *sci = sdd->cntrlr_info; struct device *dev = &sdd->pdev->dev; struct spi_transfer *xfer; @@ -553,6 +589,9 @@ static void s3c64xx_spi_unmap_mssg(struct s3c64xx_spi_driver_data *sdd, list_for_each_entry(xfer, &msg->transfers, transfer_list) { + if (xfer->len <= ((sci->fifo_lvl_mask >> 1) + 1)) + continue; + if (xfer->rx_buf != NULL && xfer->rx_dma != XFER_DMAADDR_INVALID) dma_unmap_single(dev, xfer->rx_dma, @@ -608,6 +647,14 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, bpw = xfer->bits_per_word ? : spi->bits_per_word; speed = xfer->speed_hz ? : spi->max_speed_hz; + if (xfer->len % (bpw / 8)) { + dev_err(&spi->dev, + "Xfer length(%u) not a multiple of word size(%u)\n", + xfer->len, bpw / 8); + status = -EIO; + goto out; + } + if (bpw != sdd->cur_bpw || speed != sdd->cur_speed) { sdd->cur_bpw = bpw; sdd->cur_speed = speed; @@ -798,7 +845,6 @@ static int s3c64xx_spi_setup(struct spi_device *spi) struct s3c64xx_spi_driver_data *sdd; struct s3c64xx_spi_info *sci; struct spi_message *msg; - u32 psr, speed; unsigned long flags; int err = 0; @@ -841,32 +887,37 @@ static int s3c64xx_spi_setup(struct spi_device *spi) } /* Check if we can provide the requested rate */ - speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); /* Max possible */ - - if (spi->max_speed_hz > speed) - spi->max_speed_hz = speed; - - psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; - psr &= S3C64XX_SPI_PSR_MASK; - if (psr == S3C64XX_SPI_PSR_MASK) - psr--; + if (!sci->clk_from_cmu) { + u32 psr, speed; + + /* Max possible */ + speed = clk_get_rate(sdd->src_clk) / 2 / (0 + 1); + + if (spi->max_speed_hz > speed) + spi->max_speed_hz = speed; + + psr = clk_get_rate(sdd->src_clk) / 2 / spi->max_speed_hz - 1; + psr &= S3C64XX_SPI_PSR_MASK; + if (psr == S3C64XX_SPI_PSR_MASK) + psr--; + + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz < speed) { + if (psr+1 < S3C64XX_SPI_PSR_MASK) { + psr++; + } else { + err = -EINVAL; + goto setup_exit; + } + } - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz < speed) { - if (psr+1 < S3C64XX_SPI_PSR_MASK) { - psr++; - } else { + speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); + if (spi->max_speed_hz >= speed) + spi->max_speed_hz = speed; + else err = -EINVAL; - goto setup_exit; - } } - speed = clk_get_rate(sdd->src_clk) / 2 / (psr + 1); - if (spi->max_speed_hz >= speed) - spi->max_speed_hz = speed; - else - err = -EINVAL; - setup_exit: /* setup() returns with device de-selected */ @@ -888,7 +939,8 @@ static void s3c64xx_spi_hwinit(struct s3c64xx_spi_driver_data *sdd, int channel) /* Disable Interrupts - we use Polling if not DMA mode */ writel(0, regs + S3C64XX_SPI_INT_EN); - writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, + if (!sci->clk_from_cmu) + writel(sci->src_clk_nr << S3C64XX_SPI_CLKSEL_SRCSHFT, regs + S3C64XX_SPI_CLK_CFG); writel(0, regs + S3C64XX_SPI_MODE_CFG); writel(0, regs + S3C64XX_SPI_PACKET_CNT); diff --git a/drivers/spi/spi_topcliff_pch.c b/drivers/spi/spi_topcliff_pch.c new file mode 100644 index 000000000000..58e187f45ec7 --- /dev/null +++ b/drivers/spi/spi_topcliff_pch.c @@ -0,0 +1,1303 @@ +/* + * SPI bus driver for the Topcliff PCH used by Intel SoCs + * + * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/wait.h> +#include <linux/spi/spi.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/spi/spidev.h> +#include <linux/module.h> +#include <linux/device.h> + +/* Register offsets */ +#define PCH_SPCR 0x00 /* SPI control register */ +#define PCH_SPBRR 0x04 /* SPI baud rate register */ +#define PCH_SPSR 0x08 /* SPI status register */ +#define PCH_SPDWR 0x0C /* SPI write data register */ +#define PCH_SPDRR 0x10 /* SPI read data register */ +#define PCH_SSNXCR 0x18 /* SSN Expand Control Register */ +#define PCH_SRST 0x1C /* SPI reset register */ + +#define PCH_SPSR_TFD 0x000007C0 +#define PCH_SPSR_RFD 0x0000F800 + +#define PCH_READABLE(x) (((x) & PCH_SPSR_RFD)>>11) +#define PCH_WRITABLE(x) (((x) & PCH_SPSR_TFD)>>6) + +#define PCH_RX_THOLD 7 +#define PCH_RX_THOLD_MAX 15 + +#define PCH_MAX_BAUDRATE 5000000 +#define PCH_MAX_FIFO_DEPTH 16 + +#define STATUS_RUNNING 1 +#define STATUS_EXITING 2 +#define PCH_SLEEP_TIME 10 + +#define PCH_ADDRESS_SIZE 0x20 + +#define SSN_LOW 0x02U +#define SSN_NO_CONTROL 0x00U +#define PCH_MAX_CS 0xFF +#define PCI_DEVICE_ID_GE_SPI 0x8816 + +#define SPCR_SPE_BIT (1 << 0) +#define SPCR_MSTR_BIT (1 << 1) +#define SPCR_LSBF_BIT (1 << 4) +#define SPCR_CPHA_BIT (1 << 5) +#define SPCR_CPOL_BIT (1 << 6) +#define SPCR_TFIE_BIT (1 << 8) +#define SPCR_RFIE_BIT (1 << 9) +#define SPCR_FIE_BIT (1 << 10) +#define SPCR_ORIE_BIT (1 << 11) +#define SPCR_MDFIE_BIT (1 << 12) +#define SPCR_FICLR_BIT (1 << 24) +#define SPSR_TFI_BIT (1 << 0) +#define SPSR_RFI_BIT (1 << 1) +#define SPSR_FI_BIT (1 << 2) +#define SPBRR_SIZE_BIT (1 << 10) + +#define PCH_ALL (SPCR_TFIE_BIT|SPCR_RFIE_BIT|SPCR_FIE_BIT|SPCR_ORIE_BIT|SPCR_MDFIE_BIT) + +#define SPCR_RFIC_FIELD 20 +#define SPCR_TFIC_FIELD 16 + +#define SPSR_INT_BITS 0x1F +#define MASK_SPBRR_SPBR_BITS (~((1 << 10) - 1)) +#define MASK_RFIC_SPCR_BITS (~(0xf << 20)) +#define MASK_TFIC_SPCR_BITS (~(0xf000f << 12)) + +#define PCH_CLOCK_HZ 50000000 +#define PCH_MAX_SPBR 1023 + + +/** + * struct pch_spi_data - Holds the SPI channel specific details + * @io_remap_addr: The remapped PCI base address + * @master: Pointer to the SPI master structure + * @work: Reference to work queue handler + * @wk: Workqueue for carrying out execution of the + * requests + * @wait: Wait queue for waking up upon receiving an + * interrupt. + * @transfer_complete: Status of SPI Transfer + * @bcurrent_msg_processing: Status flag for message processing + * @lock: Lock for protecting this structure + * @queue: SPI Message queue + * @status: Status of the SPI driver + * @bpw_len: Length of data to be transferred in bits per + * word + * @transfer_active: Flag showing active transfer + * @tx_index: Transmit data count; for bookkeeping during + * transfer + * @rx_index: Receive data count; for bookkeeping during + * transfer + * @tx_buff: Buffer for data to be transmitted + * @rx_index: Buffer for Received data + * @n_curnt_chip: The chip number that this SPI driver currently + * operates on + * @current_chip: Reference to the current chip that this SPI + * driver currently operates on + * @current_msg: The current message that this SPI driver is + * handling + * @cur_trans: The current transfer that this SPI driver is + * handling + * @board_dat: Reference to the SPI device data structure + */ +struct pch_spi_data { + void __iomem *io_remap_addr; + struct spi_master *master; + struct work_struct work; + struct workqueue_struct *wk; + wait_queue_head_t wait; + u8 transfer_complete; + u8 bcurrent_msg_processing; + spinlock_t lock; + struct list_head queue; + u8 status; + u32 bpw_len; + u8 transfer_active; + u32 tx_index; + u32 rx_index; + u16 *pkt_tx_buff; + u16 *pkt_rx_buff; + u8 n_curnt_chip; + struct spi_device *current_chip; + struct spi_message *current_msg; + struct spi_transfer *cur_trans; + struct pch_spi_board_data *board_dat; +}; + +/** + * struct pch_spi_board_data - Holds the SPI device specific details + * @pdev: Pointer to the PCI device + * @irq_reg_sts: Status of IRQ registration + * @pci_req_sts: Status of pci_request_regions + * @suspend_sts: Status of suspend + * @data: Pointer to SPI channel data structure + */ +struct pch_spi_board_data { + struct pci_dev *pdev; + u8 irq_reg_sts; + u8 pci_req_sts; + u8 suspend_sts; + struct pch_spi_data *data; +}; + +static struct pci_device_id pch_spi_pcidev_id[] = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_GE_SPI)}, + {0,} +}; + +/** + * pch_spi_writereg() - Performs register writes + * @master: Pointer to struct spi_master. + * @idx: Register offset. + * @val: Value to be written to register. + */ +static inline void pch_spi_writereg(struct spi_master *master, int idx, u32 val) +{ + struct pch_spi_data *data = spi_master_get_devdata(master); + iowrite32(val, (data->io_remap_addr + idx)); +} + +/** + * pch_spi_readreg() - Performs register reads + * @master: Pointer to struct spi_master. + * @idx: Register offset. + */ +static inline u32 pch_spi_readreg(struct spi_master *master, int idx) +{ + struct pch_spi_data *data = spi_master_get_devdata(master); + return ioread32(data->io_remap_addr + idx); +} + +static inline void pch_spi_setclr_reg(struct spi_master *master, int idx, + u32 set, u32 clr) +{ + u32 tmp = pch_spi_readreg(master, idx); + tmp = (tmp & ~clr) | set; + pch_spi_writereg(master, idx, tmp); +} + +static void pch_spi_set_master_mode(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_MSTR_BIT, 0); +} + +/** + * pch_spi_clear_fifo() - Clears the Transmit and Receive FIFOs + * @master: Pointer to struct spi_master. + */ +static void pch_spi_clear_fifo(struct spi_master *master) +{ + pch_spi_setclr_reg(master, PCH_SPCR, SPCR_FICLR_BIT, 0); + pch_spi_setclr_reg(master, PCH_SPCR, 0, SPCR_FICLR_BIT); +} + +static void pch_spi_handler_sub(struct pch_spi_data *data, u32 reg_spsr_val, + void __iomem *io_remap_addr) +{ + u32 n_read, tx_index, rx_index, bpw_len; + u16 *pkt_rx_buffer, *pkt_tx_buff; + int read_cnt; + u32 reg_spcr_val; + void __iomem *spsr; + void __iomem *spdrr; + void __iomem *spdwr; + + spsr = io_remap_addr + PCH_SPSR; + iowrite32(reg_spsr_val, spsr); + + if (data->transfer_active) { + rx_index = data->rx_index; + tx_index = data->tx_index; + bpw_len = data->bpw_len; + pkt_rx_buffer = data->pkt_rx_buff; + pkt_tx_buff = data->pkt_tx_buff; + + spdrr = io_remap_addr + PCH_SPDRR; + spdwr = io_remap_addr + PCH_SPDWR; + + n_read = PCH_READABLE(reg_spsr_val); + + for (read_cnt = 0; (read_cnt < n_read); read_cnt++) { + pkt_rx_buffer[rx_index++] = ioread32(spdrr); + if (tx_index < bpw_len) + iowrite32(pkt_tx_buff[tx_index++], spdwr); + } + + /* disable RFI if not needed */ + if ((bpw_len - rx_index) <= PCH_MAX_FIFO_DEPTH) { + reg_spcr_val = ioread32(io_remap_addr + PCH_SPCR); + reg_spcr_val &= ~SPCR_RFIE_BIT; /* disable RFI */ + + /* reset rx threshold */ + reg_spcr_val &= MASK_RFIC_SPCR_BITS; + reg_spcr_val |= (PCH_RX_THOLD_MAX << SPCR_RFIC_FIELD); + iowrite32(((reg_spcr_val) &= (~(SPCR_RFIE_BIT))), + (io_remap_addr + PCH_SPCR)); + } + + /* update counts */ + data->tx_index = tx_index; + data->rx_index = rx_index; + + } + + /* if transfer complete interrupt */ + if (reg_spsr_val & SPSR_FI_BIT) { + /* disable FI & RFI interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, + SPCR_FIE_BIT | SPCR_TFIE_BIT); + + /* transfer is completed;inform pch_spi_process_messages */ + data->transfer_complete = true; + wake_up(&data->wait); + } +} + +/** + * pch_spi_handler() - Interrupt handler + * @irq: The interrupt number. + * @dev_id: Pointer to struct pch_spi_board_data. + */ +static irqreturn_t pch_spi_handler(int irq, void *dev_id) +{ + u32 reg_spsr_val; + struct pch_spi_data *data; + void __iomem *spsr; + void __iomem *io_remap_addr; + irqreturn_t ret = IRQ_NONE; + struct pch_spi_board_data *board_dat = dev_id; + + if (board_dat->suspend_sts) { + dev_dbg(&board_dat->pdev->dev, + "%s returning due to suspend\n", __func__); + return IRQ_NONE; + } + + data = board_dat->data; + io_remap_addr = data->io_remap_addr; + spsr = io_remap_addr + PCH_SPSR; + + reg_spsr_val = ioread32(spsr); + + /* Check if the interrupt is for SPI device */ + if (reg_spsr_val & (SPSR_FI_BIT | SPSR_RFI_BIT)) { + pch_spi_handler_sub(data, reg_spsr_val, io_remap_addr); + ret = IRQ_HANDLED; + } + + dev_dbg(&board_dat->pdev->dev, "%s EXIT return value=%d\n", + __func__, ret); + + return ret; +} + +/** + * pch_spi_set_baud_rate() - Sets SPBR field in SPBRR + * @master: Pointer to struct spi_master. + * @speed_hz: Baud rate. + */ +static void pch_spi_set_baud_rate(struct spi_master *master, u32 speed_hz) +{ + u32 n_spbr = PCH_CLOCK_HZ / (speed_hz * 2); + + /* if baud rate is less than we can support limit it */ + if (n_spbr > PCH_MAX_SPBR) + n_spbr = PCH_MAX_SPBR; + + pch_spi_setclr_reg(master, PCH_SPBRR, n_spbr, ~MASK_SPBRR_SPBR_BITS); +} + +/** + * pch_spi_set_bits_per_word() - Sets SIZE field in SPBRR + * @master: Pointer to struct spi_master. + * @bits_per_word: Bits per word for SPI transfer. + */ +static void pch_spi_set_bits_per_word(struct spi_master *master, + u8 bits_per_word) +{ + if (bits_per_word == 8) + pch_spi_setclr_reg(master, PCH_SPBRR, 0, SPBRR_SIZE_BIT); + else + pch_spi_setclr_reg(master, PCH_SPBRR, SPBRR_SIZE_BIT, 0); +} + +/** + * pch_spi_setup_transfer() - Configures the PCH SPI hardware for transfer + * @spi: Pointer to struct spi_device. + */ +static void pch_spi_setup_transfer(struct spi_device *spi) +{ + u32 flags = 0; + + dev_dbg(&spi->dev, "%s SPBRR content =%x setting baud rate=%d\n", + __func__, pch_spi_readreg(spi->master, PCH_SPBRR), + spi->max_speed_hz); + pch_spi_set_baud_rate(spi->master, spi->max_speed_hz); + + /* set bits per word */ + pch_spi_set_bits_per_word(spi->master, spi->bits_per_word); + + if (!(spi->mode & SPI_LSB_FIRST)) + flags |= SPCR_LSBF_BIT; + if (spi->mode & SPI_CPOL) + flags |= SPCR_CPOL_BIT; + if (spi->mode & SPI_CPHA) + flags |= SPCR_CPHA_BIT; + pch_spi_setclr_reg(spi->master, PCH_SPCR, flags, + (SPCR_LSBF_BIT | SPCR_CPOL_BIT | SPCR_CPHA_BIT)); + + /* Clear the FIFO by toggling FICLR to 1 and back to 0 */ + pch_spi_clear_fifo(spi->master); +} + +/** + * pch_spi_reset() - Clears SPI registers + * @master: Pointer to struct spi_master. + */ +static void pch_spi_reset(struct spi_master *master) +{ + /* write 1 to reset SPI */ + pch_spi_writereg(master, PCH_SRST, 0x1); + + /* clear reset */ + pch_spi_writereg(master, PCH_SRST, 0x0); +} + +static int pch_spi_setup(struct spi_device *pspi) +{ + /* check bits per word */ + if (pspi->bits_per_word == 0) { + pspi->bits_per_word = 8; + dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__); + } + + if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) { + dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__); + return -EINVAL; + } + + /* Check baud rate setting */ + /* if baud rate of chip is greater than + max we can support,return error */ + if ((pspi->max_speed_hz) > PCH_MAX_BAUDRATE) + pspi->max_speed_hz = PCH_MAX_BAUDRATE; + + dev_dbg(&pspi->dev, "%s MODE = %x\n", __func__, + (pspi->mode) & (SPI_CPOL | SPI_CPHA)); + + return 0; +} + +static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg) +{ + + struct spi_transfer *transfer; + struct pch_spi_data *data = spi_master_get_devdata(pspi->master); + int retval; + unsigned long flags; + + /* validate spi message and baud rate */ + if (unlikely(list_empty(&pmsg->transfers) == 1)) { + dev_err(&pspi->dev, "%s list empty\n", __func__); + retval = -EINVAL; + goto err_out; + } + + if (unlikely(pspi->max_speed_hz == 0)) { + dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n", + __func__, pspi->max_speed_hz); + retval = -EINVAL; + goto err_out; + } + + dev_dbg(&pspi->dev, "%s Transfer List not empty. " + "Transfer Speed is set.\n", __func__); + + /* validate Tx/Rx buffers and Transfer length */ + list_for_each_entry(transfer, &pmsg->transfers, transfer_list) { + if (!transfer->tx_buf && !transfer->rx_buf) { + dev_err(&pspi->dev, + "%s Tx and Rx buffer NULL\n", __func__); + retval = -EINVAL; + goto err_out; + } + + if (!transfer->len) { + dev_err(&pspi->dev, "%s Transfer length invalid\n", + __func__); + retval = -EINVAL; + goto err_out; + } + + dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length" + " valid\n", __func__); + + /* if baud rate hs been specified validate the same */ + if (transfer->speed_hz > PCH_MAX_BAUDRATE) + transfer->speed_hz = PCH_MAX_BAUDRATE; + + /* if bits per word has been specified validate the same */ + if (transfer->bits_per_word) { + if ((transfer->bits_per_word != 8) + && (transfer->bits_per_word != 16)) { + retval = -EINVAL; + dev_err(&pspi->dev, + "%s Invalid bits per word\n", __func__); + goto err_out; + } + } + } + + spin_lock_irqsave(&data->lock, flags); + + /* We won't process any messages if we have been asked to terminate */ + if (data->status == STATUS_EXITING) { + dev_err(&pspi->dev, "%s status = STATUS_EXITING.\n", __func__); + retval = -ESHUTDOWN; + goto err_return_spinlock; + } + + /* If suspended ,return -EINVAL */ + if (data->board_dat->suspend_sts) { + dev_err(&pspi->dev, "%s suspend; returning EINVAL\n", __func__); + retval = -EINVAL; + goto err_return_spinlock; + } + + /* set status of message */ + pmsg->actual_length = 0; + dev_dbg(&pspi->dev, "%s - pmsg->status =%d\n", __func__, pmsg->status); + + pmsg->status = -EINPROGRESS; + + /* add message to queue */ + list_add_tail(&pmsg->queue, &data->queue); + dev_dbg(&pspi->dev, "%s - Invoked list_add_tail\n", __func__); + + /* schedule work queue to run */ + queue_work(data->wk, &data->work); + dev_dbg(&pspi->dev, "%s - Invoked queue work\n", __func__); + + retval = 0; + +err_return_spinlock: + spin_unlock_irqrestore(&data->lock, flags); +err_out: + dev_dbg(&pspi->dev, "%s RETURN=%d\n", __func__, retval); + return retval; +} + +static inline void pch_spi_select_chip(struct pch_spi_data *data, + struct spi_device *pspi) +{ + if (data->current_chip != NULL) { + if (pspi->chip_select != data->n_curnt_chip) { + dev_dbg(&pspi->dev, "%s : different slave\n", __func__); + data->current_chip = NULL; + } + } + + data->current_chip = pspi; + + data->n_curnt_chip = data->current_chip->chip_select; + + dev_dbg(&pspi->dev, "%s :Invoking pch_spi_setup_transfer\n", __func__); + pch_spi_setup_transfer(pspi); +} + +static void pch_spi_set_tx(struct pch_spi_data *data, int *bpw, + struct spi_message **ppmsg) +{ + int size; + u32 n_writes; + int j; + struct spi_message *pmsg; + const u8 *tx_buf; + const u16 *tx_sbuf; + + pmsg = *ppmsg; + + /* set baud rate if needed */ + if (data->cur_trans->speed_hz) { + dev_dbg(&data->master->dev, "%s:setting baud rate\n", __func__); + pch_spi_set_baud_rate(data->master, data->cur_trans->speed_hz); + } + + /* set bits per word if needed */ + if (data->cur_trans->bits_per_word && + (data->current_msg->spi->bits_per_word != data->cur_trans->bits_per_word)) { + dev_dbg(&data->master->dev, "%s:set bits per word\n", __func__); + pch_spi_set_bits_per_word(data->master, + data->cur_trans->bits_per_word); + *bpw = data->cur_trans->bits_per_word; + } else { + *bpw = data->current_msg->spi->bits_per_word; + } + + /* reset Tx/Rx index */ + data->tx_index = 0; + data->rx_index = 0; + + data->bpw_len = data->cur_trans->len / (*bpw / 8); + + /* find alloc size */ + size = data->cur_trans->len * sizeof(*data->pkt_tx_buff); + + /* allocate memory for pkt_tx_buff & pkt_rx_buffer */ + data->pkt_tx_buff = kzalloc(size, GFP_KERNEL); + if (data->pkt_tx_buff != NULL) { + data->pkt_rx_buff = kzalloc(size, GFP_KERNEL); + if (!data->pkt_rx_buff) + kfree(data->pkt_tx_buff); + } + + if (!data->pkt_rx_buff) { + /* flush queue and set status of all transfers to -ENOMEM */ + dev_err(&data->master->dev, "%s :kzalloc failed\n", __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -ENOMEM; + + if (pmsg->complete != 0) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + return; + } + + /* copy Tx Data */ + if (data->cur_trans->tx_buf != NULL) { + if (*bpw == 8) { + tx_buf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_buf++; + } else { + tx_sbuf = data->cur_trans->tx_buf; + for (j = 0; j < data->bpw_len; j++) + data->pkt_tx_buff[j] = *tx_sbuf++; + } + } + + /* if len greater than PCH_MAX_FIFO_DEPTH, write 16,else len bytes */ + n_writes = data->bpw_len; + if (n_writes > PCH_MAX_FIFO_DEPTH) + n_writes = PCH_MAX_FIFO_DEPTH; + + dev_dbg(&data->master->dev, "\n%s:Pulling down SSN low - writing " + "0x2 to SSNXCR\n", __func__); + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_LOW); + + for (j = 0; j < n_writes; j++) + pch_spi_writereg(data->master, PCH_SPDWR, data->pkt_tx_buff[j]); + + /* update tx_index */ + data->tx_index = j; + + /* reset transfer complete flag */ + data->transfer_complete = false; + data->transfer_active = true; +} + + +static void pch_spi_nomore_transfer(struct pch_spi_data *data, + struct spi_message *pmsg) +{ + dev_dbg(&data->master->dev, "%s called\n", __func__); + /* Invoke complete callback + * [To the spi core..indicating end of transfer] */ + data->current_msg->status = 0; + + if (data->current_msg->complete != 0) { + dev_dbg(&data->master->dev, + "%s:Invoking callback of SPI core\n", __func__); + data->current_msg->complete(data->current_msg->context); + } + + /* update status in global variable */ + data->bcurrent_msg_processing = false; + + dev_dbg(&data->master->dev, + "%s:data->bcurrent_msg_processing = false\n", __func__); + + data->current_msg = NULL; + data->cur_trans = NULL; + + /* check if we have items in list and not suspending + * return 1 if list empty */ + if ((list_empty(&data->queue) == 0) && + (!data->board_dat->suspend_sts) && + (data->status != STATUS_EXITING)) { + /* We have some more work to do (either there is more tranint + * bpw;sfer requests in the current message or there are + *more messages) + */ + dev_dbg(&data->master->dev, "%s:Invoke queue_work\n", __func__); + queue_work(data->wk, &data->work); + } else if (data->board_dat->suspend_sts || + data->status == STATUS_EXITING) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated, flushing queue\n", + __func__); + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete) + pmsg->complete(pmsg->context); + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + } +} + +static void pch_spi_set_ir(struct pch_spi_data *data) +{ + /* enable interrupts */ + if ((data->bpw_len) > PCH_MAX_FIFO_DEPTH) { + /* set receive threhold to PCH_RX_THOLD */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD << SPCR_TFIC_FIELD, + ~MASK_TFIC_SPCR_BITS); + /* enable FI and RFI interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + SPCR_RFIE_BIT | SPCR_TFIE_BIT, 0); + } else { + /* set receive threhold to maximum */ + pch_spi_setclr_reg(data->master, PCH_SPCR, + PCH_RX_THOLD_MAX << SPCR_TFIC_FIELD, + ~MASK_TFIC_SPCR_BITS); + /* enable FI interrupt */ + pch_spi_setclr_reg(data->master, PCH_SPCR, SPCR_FIE_BIT, 0); + } + + dev_dbg(&data->master->dev, + "%s:invoking pch_spi_set_enable to enable SPI\n", __func__); + + /* SPI set enable */ + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, SPCR_SPE_BIT, 0); + + /* Wait until the transfer completes; go to sleep after + initiating the transfer. */ + dev_dbg(&data->master->dev, + "%s:waiting for transfer to get over\n", __func__); + + wait_event_interruptible(data->wait, data->transfer_complete); + + pch_spi_writereg(data->master, PCH_SSNXCR, SSN_NO_CONTROL); + dev_dbg(&data->master->dev, + "%s:no more control over SSN-writing 0 to SSNXCR.", __func__); + + data->transfer_active = false; + dev_dbg(&data->master->dev, + "%s set data->transfer_active = false\n", __func__); + + /* clear all interrupts */ + pch_spi_writereg(data->master, PCH_SPSR, + pch_spi_readreg(data->master, PCH_SPSR)); + /* disable interrupts */ + pch_spi_setclr_reg(data->master, PCH_SPCR, 0, PCH_ALL); +} + +static void pch_spi_copy_rx_data(struct pch_spi_data *data, int bpw) +{ + int j; + u8 *rx_buf; + u16 *rx_sbuf; + + /* copy Rx Data */ + if (!data->cur_trans->rx_buf) + return; + + if (bpw == 8) { + rx_buf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_buf++ = data->pkt_rx_buff[j] & 0xFF; + } else { + rx_sbuf = data->cur_trans->rx_buf; + for (j = 0; j < data->bpw_len; j++) + *rx_sbuf++ = data->pkt_rx_buff[j]; + } +} + + +static void pch_spi_process_messages(struct work_struct *pwork) +{ + struct spi_message *pmsg; + struct pch_spi_data *data; + int bpw; + + data = container_of(pwork, struct pch_spi_data, work); + dev_dbg(&data->master->dev, "%s data initialized\n", __func__); + + spin_lock(&data->lock); + + /* check if suspend has been initiated;if yes flush queue */ + if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) { + dev_dbg(&data->master->dev, + "%s suspend/remove initiated,flushing queue\n", + __func__); + + list_for_each_entry(pmsg, data->queue.next, queue) { + pmsg->status = -EIO; + + if (pmsg->complete != 0) { + spin_unlock(&data->lock); + pmsg->complete(pmsg->context); + spin_lock(&data->lock); + } + + /* delete from queue */ + list_del_init(&pmsg->queue); + } + + spin_unlock(&data->lock); + return; + } + + data->bcurrent_msg_processing = true; + dev_dbg(&data->master->dev, + "%s Set data->bcurrent_msg_processing= true\n", __func__); + + /* Get the message from the queue and delete it from there. */ + data->current_msg = list_entry(data->queue.next, struct spi_message, + queue); + + list_del_init(&data->current_msg->queue); + + data->current_msg->status = 0; + + pch_spi_select_chip(data, data->current_msg->spi); + + spin_unlock(&data->lock); + + do { + /* If we are already processing a message get the next + transfer structure from the message otherwise retrieve + the 1st transfer request from the message. */ + spin_lock(&data->lock); + + if (data->cur_trans == NULL) { + data->cur_trans = + list_entry(data->current_msg->transfers. + next, struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting 1st transfer message\n", __func__); + } else { + data->cur_trans = + list_entry(data->cur_trans->transfer_list.next, + struct spi_transfer, + transfer_list); + dev_dbg(&data->master->dev, + "%s :Getting next transfer message\n", + __func__); + } + + spin_unlock(&data->lock); + + pch_spi_set_tx(data, &bpw, &pmsg); + + /* Control interrupt*/ + pch_spi_set_ir(data); + + /* Disable SPI transfer */ + pch_spi_setclr_reg(data->current_chip->master, PCH_SPCR, 0, + SPCR_SPE_BIT); + + /* clear FIFO */ + pch_spi_clear_fifo(data->master); + + /* copy Rx Data */ + pch_spi_copy_rx_data(data, bpw); + + /* free memory */ + kfree(data->pkt_rx_buff); + data->pkt_rx_buff = NULL; + + kfree(data->pkt_tx_buff); + data->pkt_tx_buff = NULL; + + /* increment message count */ + data->current_msg->actual_length += data->cur_trans->len; + + dev_dbg(&data->master->dev, + "%s:data->current_msg->actual_length=%d\n", + __func__, data->current_msg->actual_length); + + /* check for delay */ + if (data->cur_trans->delay_usecs) { + dev_dbg(&data->master->dev, "%s:" + "delay in usec=%d\n", __func__, + data->cur_trans->delay_usecs); + udelay(data->cur_trans->delay_usecs); + } + + spin_lock(&data->lock); + + /* No more transfer in this message. */ + if ((data->cur_trans->transfer_list.next) == + &(data->current_msg->transfers)) { + pch_spi_nomore_transfer(data, pmsg); + } + + spin_unlock(&data->lock); + + } while (data->cur_trans != NULL); +} + +static void pch_spi_free_resources(struct pch_spi_board_data *board_dat) +{ + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* free workqueue */ + if (board_dat->data->wk != NULL) { + destroy_workqueue(board_dat->data->wk); + board_dat->data->wk = NULL; + dev_dbg(&board_dat->pdev->dev, + "%s destroy_workqueue invoked successfully\n", + __func__); + } + + /* disable interrupts & free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable interrupts */ + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); + + /* free IRQ */ + free_irq(board_dat->pdev->irq, board_dat); + + dev_dbg(&board_dat->pdev->dev, + "%s free_irq invoked successfully\n", __func__); + + board_dat->irq_reg_sts = false; + } + + /* unmap PCI base address */ + if (board_dat->data->io_remap_addr != 0) { + pci_iounmap(board_dat->pdev, board_dat->data->io_remap_addr); + + board_dat->data->io_remap_addr = 0; + + dev_dbg(&board_dat->pdev->dev, + "%s pci_iounmap invoked successfully\n", __func__); + } + + /* release PCI region */ + if (board_dat->pci_req_sts) { + pci_release_regions(board_dat->pdev); + dev_dbg(&board_dat->pdev->dev, + "%s pci_release_regions invoked successfully\n", + __func__); + board_dat->pci_req_sts = false; + } +} + +static int pch_spi_get_resources(struct pch_spi_board_data *board_dat) +{ + void __iomem *io_remap_addr; + int retval; + dev_dbg(&board_dat->pdev->dev, "%s ENTRY\n", __func__); + + /* create workqueue */ + board_dat->data->wk = create_singlethread_workqueue(KBUILD_MODNAME); + if (!board_dat->data->wk) { + dev_err(&board_dat->pdev->dev, + "%s create_singlet hread_workqueue failed\n", __func__); + retval = -EBUSY; + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, + "%s create_singlethread_workqueue success\n", __func__); + + retval = pci_request_regions(board_dat->pdev, KBUILD_MODNAME); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_region failed\n", __func__); + goto err_return; + } + + board_dat->pci_req_sts = true; + + io_remap_addr = pci_iomap(board_dat->pdev, 1, 0); + if (io_remap_addr == 0) { + dev_err(&board_dat->pdev->dev, + "%s pci_iomap failed\n", __func__); + retval = -ENOMEM; + goto err_return; + } + + /* calculate base address for all channels */ + board_dat->data->io_remap_addr = io_remap_addr; + + /* reset PCH SPI h/w */ + pch_spi_reset(board_dat->data->master); + dev_dbg(&board_dat->pdev->dev, + "%s pch_spi_reset invoked successfully\n", __func__); + + /* register IRQ */ + retval = request_irq(board_dat->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, board_dat); + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s request_irq failed\n", __func__); + goto err_return; + } + + dev_dbg(&board_dat->pdev->dev, "%s request_irq returned=%d\n", + __func__, retval); + + board_dat->irq_reg_sts = true; + dev_dbg(&board_dat->pdev->dev, "%s data->irq_reg_sts=true\n", __func__); + +err_return: + if (retval != 0) { + dev_err(&board_dat->pdev->dev, + "%s FAIL:invoking pch_spi_free_resources\n", __func__); + pch_spi_free_resources(board_dat); + } + + dev_dbg(&board_dat->pdev->dev, "%s Return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + + struct spi_master *master; + + struct pch_spi_board_data *board_dat; + int retval; + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + /* allocate memory for private data */ + board_dat = kzalloc(sizeof(struct pch_spi_board_data), GFP_KERNEL); + if (board_dat == NULL) { + dev_err(&pdev->dev, + " %s memory allocation for private data failed\n", + __func__); + retval = -ENOMEM; + goto err_kmalloc; + } + + dev_dbg(&pdev->dev, + "%s memory allocation for private data success\n", __func__); + + /* enable PCI device */ + retval = pci_enable_device(pdev); + if (retval != 0) { + dev_err(&pdev->dev, "%s pci_enable_device FAILED\n", __func__); + + goto err_pci_en_device; + } + + dev_dbg(&pdev->dev, "%s pci_enable_device returned=%d\n", + __func__, retval); + + board_dat->pdev = pdev; + + /* alllocate memory for SPI master */ + master = spi_alloc_master(&pdev->dev, sizeof(struct pch_spi_data)); + if (master == NULL) { + retval = -ENOMEM; + dev_err(&pdev->dev, "%s Fail.\n", __func__); + goto err_spi_alloc_master; + } + + dev_dbg(&pdev->dev, + "%s spi_alloc_master returned non NULL\n", __func__); + + /* initialize members of SPI master */ + master->bus_num = -1; + master->num_chipselect = PCH_MAX_CS; + master->setup = pch_spi_setup; + master->transfer = pch_spi_transfer; + dev_dbg(&pdev->dev, + "%s transfer member of SPI master initialized\n", __func__); + + board_dat->data = spi_master_get_devdata(master); + + board_dat->data->master = master; + board_dat->data->n_curnt_chip = 255; + board_dat->data->board_dat = board_dat; + board_dat->data->status = STATUS_RUNNING; + + INIT_LIST_HEAD(&board_dat->data->queue); + spin_lock_init(&board_dat->data->lock); + INIT_WORK(&board_dat->data->work, pch_spi_process_messages); + init_waitqueue_head(&board_dat->data->wait); + + /* allocate resources for PCH SPI */ + retval = pch_spi_get_resources(board_dat); + if (retval) { + dev_err(&pdev->dev, "%s fail(retval=%d)\n", __func__, retval); + goto err_spi_get_resources; + } + + dev_dbg(&pdev->dev, "%s pch_spi_get_resources returned=%d\n", + __func__, retval); + + /* save private data in dev */ + pci_set_drvdata(pdev, board_dat); + dev_dbg(&pdev->dev, "%s invoked pci_set_drvdata\n", __func__); + + /* set master mode */ + pch_spi_set_master_mode(master); + dev_dbg(&pdev->dev, + "%s invoked pch_spi_set_master_mode\n", __func__); + + /* Register the controller with the SPI core. */ + retval = spi_register_master(master); + if (retval != 0) { + dev_err(&pdev->dev, + "%s spi_register_master FAILED\n", __func__); + goto err_spi_reg_master; + } + + dev_dbg(&pdev->dev, "%s spi_register_master returned=%d\n", + __func__, retval); + + + return 0; + +err_spi_reg_master: + spi_unregister_master(master); +err_spi_get_resources: +err_spi_alloc_master: + spi_master_put(master); + pci_disable_device(pdev); +err_pci_en_device: + kfree(board_dat); +err_kmalloc: + return retval; +} + +static void pch_spi_remove(struct pci_dev *pdev) +{ + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + int count; + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return; + } + + /* check for any pending messages; no action is taken if the queue + * is still full; but at least we tried. Unload anyway */ + count = 500; + spin_lock(&board_dat->data->lock); + board_dat->data->status = STATUS_EXITING; + while ((list_empty(&board_dat->data->queue) == 0) && --count) { + dev_dbg(&board_dat->pdev->dev, "%s :queue not empty\n", + __func__); + spin_unlock(&board_dat->data->lock); + msleep(PCH_SLEEP_TIME); + spin_lock(&board_dat->data->lock); + } + spin_unlock(&board_dat->data->lock); + + /* Free resources allocated for PCH SPI */ + pch_spi_free_resources(board_dat); + + spi_unregister_master(board_dat->data->master); + + /* free memory for private data */ + kfree(board_dat); + + pci_set_drvdata(pdev, NULL); + + /* disable PCI device */ + pci_disable_device(pdev); + + dev_dbg(&pdev->dev, "%s invoked pci_disable_device\n", __func__); +} + +#ifdef CONFIG_PM +static int pch_spi_suspend(struct pci_dev *pdev, pm_message_t state) +{ + u8 count; + int retval; + + struct pch_spi_board_data *board_dat = pci_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board_dat) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + retval = 0; + board_dat->suspend_sts = true; + + /* check if the current message is processed: + Only after thats done the transfer will be suspended */ + count = 255; + while ((--count) > 0) { + if (!(board_dat->data->bcurrent_msg_processing)) { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_" + "msg_processing = false\n", __func__); + break; + } else { + dev_dbg(&pdev->dev, "%s board_dat->data->bCurrent_msg_" + "processing = true\n", __func__); + } + msleep(PCH_SLEEP_TIME); + } + + /* Free IRQ */ + if (board_dat->irq_reg_sts) { + /* disable all interrupts */ + pch_spi_setclr_reg(board_dat->data->master, PCH_SPCR, 0, + PCH_ALL); + pch_spi_reset(board_dat->data->master); + + free_irq(board_dat->pdev->irq, board_dat); + + board_dat->irq_reg_sts = false; + dev_dbg(&pdev->dev, + "%s free_irq invoked successfully.\n", __func__); + } + + /* save config space */ + retval = pci_save_state(pdev); + + if (retval == 0) { + dev_dbg(&pdev->dev, "%s pci_save_state returned=%d\n", + __func__, retval); + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + dev_dbg(&pdev->dev, + "%s pci_enable_wake invoked successfully\n", __func__); + /* disable PCI device */ + pci_disable_device(pdev); + dev_dbg(&pdev->dev, + "%s pci_disable_device invoked successfully\n", + __func__); + /* move device to D3hot state */ + pci_set_power_state(pdev, PCI_D3hot); + dev_dbg(&pdev->dev, + "%s pci_set_power_state invoked successfully\n", + __func__); + } else { + dev_err(&pdev->dev, "%s pci_save_state failed\n", __func__); + } + + dev_dbg(&pdev->dev, "%s return=%d\n", __func__, retval); + + return retval; +} + +static int pch_spi_resume(struct pci_dev *pdev) +{ + int retval; + + struct pch_spi_board_data *board = pci_get_drvdata(pdev); + dev_dbg(&pdev->dev, "%s ENTRY\n", __func__); + + if (!board) { + dev_err(&pdev->dev, + "%s pci_get_drvdata returned NULL\n", __func__); + return -EFAULT; + } + + /* move device to DO power state */ + pci_set_power_state(pdev, PCI_D0); + + /* restore state */ + pci_restore_state(pdev); + + retval = pci_enable_device(pdev); + if (retval < 0) { + dev_err(&pdev->dev, + "%s pci_enable_device failed\n", __func__); + } else { + /* disable PM notifications */ + pci_enable_wake(pdev, PCI_D3hot, 0); + + /* register IRQ handler */ + if (!board->irq_reg_sts) { + /* register IRQ */ + retval = request_irq(board->pdev->irq, pch_spi_handler, + IRQF_SHARED, KBUILD_MODNAME, + board); + if (retval < 0) { + dev_err(&pdev->dev, + "%s request_irq failed\n", __func__); + return retval; + } + board->irq_reg_sts = true; + + /* reset PCH SPI h/w */ + pch_spi_reset(board->data->master); + pch_spi_set_master_mode(board->data->master); + + /* set suspend status to false */ + board->suspend_sts = false; + + } + } + + dev_dbg(&pdev->dev, "%s returning=%d\n", __func__, retval); + + return retval; +} +#else +#define pch_spi_suspend NULL +#define pch_spi_resume NULL + +#endif + +static struct pci_driver pch_spi_pcidev = { + .name = "pch_spi", + .id_table = pch_spi_pcidev_id, + .probe = pch_spi_probe, + .remove = pch_spi_remove, + .suspend = pch_spi_suspend, + .resume = pch_spi_resume, +}; + +static int __init pch_spi_init(void) +{ + return pci_register_driver(&pch_spi_pcidev); +} +module_init(pch_spi_init); + +static void __exit pch_spi_exit(void) +{ + pci_unregister_driver(&pch_spi_pcidev); +} +module_exit(pch_spi_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Topcliff PCH SPI PCI Driver"); diff --git a/include/linux/amba/pl022.h b/include/linux/amba/pl022.h index abf26cc47a2b..4ce98f54186b 100644 --- a/include/linux/amba/pl022.h +++ b/include/linux/amba/pl022.h @@ -228,6 +228,7 @@ enum ssp_chip_select { }; +struct dma_chan; /** * struct pl022_ssp_master - device.platform_data for SPI controller devices. * @num_chipselect: chipselects are used to distinguish individual @@ -235,11 +236,16 @@ enum ssp_chip_select { * each slave has a chipselect signal, but it's common that not * every chipselect is connected to a slave. * @enable_dma: if true enables DMA driven transfers. + * @dma_rx_param: parameter to locate an RX DMA channel. + * @dma_tx_param: parameter to locate a TX DMA channel. */ struct pl022_ssp_controller { u16 bus_id; u8 num_chipselect; u8 enable_dma:1; + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); + void *dma_rx_param; + void *dma_tx_param; }; /** @@ -270,20 +276,13 @@ struct pl022_ssp_controller { * @dma_config: DMA configuration for SSP controller and peripheral */ struct pl022_config_chip { - struct device *dev; - enum ssp_loopback lbm; enum ssp_interface iface; enum ssp_hierarchy hierarchy; bool slave_tx_disable; struct ssp_clock_params clk_freq; - enum ssp_rx_endian endian_rx; - enum ssp_tx_endian endian_tx; - enum ssp_data_size data_size; enum ssp_mode com_mode; enum ssp_rx_level_trig rx_lev_trig; enum ssp_tx_level_trig tx_lev_trig; - enum ssp_spi_clk_phase clk_phase; - enum ssp_spi_clk_pol clk_pol; enum ssp_microwire_ctrl_len ctrl_len; enum ssp_microwire_wait_state wait_state; enum ssp_duplex duplex; |