aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMark M. Hoffman2005-10-17 23:01:45 +0200
committerGreg Kroah-Hartman2005-10-28 14:02:11 -0700
commit7ab83a9137ccd3e092fb6ad0cb105b4d1fb617ae (patch)
treee76341e6617eac19514ce2e41768514f7c9acedb
parent1747ef1b8c9b7b9c6a9aae3543a9b99acabb7e10 (diff)
[PATCH] hwmon: New device ID for the smsc47b397 driver
This patch adds a new ID to the SMSC LPC47B397-NC hardware monitoring driver - for a chip that is claimed to be 100% compatible otherwise. Signed-off-by: Bryan Young (Utilitek Systems, Inc.) Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--Documentation/hwmon/smsc47b3978
-rw-r--r--drivers/hwmon/smsc47b397.c7
2 files changed, 10 insertions, 5 deletions
diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c96432..20682f15ae41 100644
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,7 @@ Kernel driver smsc47b397
Supported chips:
* SMSC LPC47B397-NC
+ * SMSC SCH5307-NS
Prefix: 'smsc47b397'
Addresses scanned: none, address read from Super I/O config space
Datasheet: In this file
@@ -12,11 +13,14 @@ Authors: Mark M. Hoffman <mhoffman@lightlink.com>
November 23, 2004
-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip
(for which there is no public datasheet available). This document was
provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
by Mark M. Hoffman <mhoffman@lightlink.com>.
+[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise
+compatible.
+
* * * * *
Methods for detecting the HP SIO and reading the thermal data on a dc7100.
@@ -127,7 +131,7 @@ OUT DX,AL
The registers of interest for identifying the SIO on the dc7100 are Device ID
(0x20) and Device Rev (0x21).
-The Device ID will read 0X6F
+The Device ID will read 0x6F (for SCH5307-NS, 0x81)
The Device Rev currently reads 0x01
Obtaining the HWM Base Address.
diff --git a/drivers/hwmon/smsc47b397.c b/drivers/hwmon/smsc47b397.c
index 7fe71576dea4..37ed8b33f01a 100644
--- a/drivers/hwmon/smsc47b397.c
+++ b/drivers/hwmon/smsc47b397.c
@@ -299,7 +299,7 @@ static int __init smsc47b397_find(unsigned short *addr)
superio_enter();
id = superio_inb(SUPERIO_REG_DEVID);
- if (id != 0x6f) {
+ if ((id != 0x6f) && (id != 0x81)) {
superio_exit();
return -ENODEV;
}
@@ -310,8 +310,9 @@ static int __init smsc47b397_find(unsigned short *addr)
*addr = (superio_inb(SUPERIO_REG_BASE_MSB) << 8)
| superio_inb(SUPERIO_REG_BASE_LSB);
- printk(KERN_INFO "smsc47b397: found SMSC LPC47B397-NC "
- "(base address 0x%04x, revision %u)\n", *addr, rev);
+ printk(KERN_INFO "smsc47b397: found SMSC %s "
+ "(base address 0x%04x, revision %u)\n",
+ id == 0x81 ? "SCH5307-NS" : "LPC47B397-NC", *addr, rev);
superio_exit();
return 0;