Merge branch 'net-ravb-Add-support-for-explicit-internal-clock-delay-c

onfiguration'

Geert Uytterhoeven says:

====================
net/ravb: Add support for explicit internal clock delay configuration

Some Renesas EtherAVB variants support internal clock delay
configuration, which can add larger delays than the delays that are
typically supported by the PHY (using an "rgmii-*id" PHY mode, and/or
"[rt]xc-skew-ps" properties).

Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode.  This caused issues with PHY drivers that
implement PHY internal delays properly[1].  Hence a backwards-compatible
workaround was added by masking the PHY mode[2].

This patch series implements the next step of the plan outlined in [3],
and adds proper support for explicit configuration of the MAC internal
clock delays using new "[rt]x-internal-delay-ps" properties.  If none of
these properties is present, the driver falls back to the old handling.

This can be considered the MAC counterpart of commit 9150069bf5fc0e86
("dt-bindings: net: Add tx and rx internal delays"), which applies to
the PHY.  Note that unlike commit 92252eec913b2dd5 ("net: phy: Add a
helper to return the index for of the internal delay"), no helpers are
provided to parse the DT properties, as so far there is a single user
only, which supports only zero or a single fixed value.  Of course such
helpers can be added later, when the need arises, or when deemed useful
otherwise.

This series consists of 3 parts:
  1. DT binding updates documenting the new properties, for both the
     generic ethernet-controller and the EtherAVB-specific bindings,
  2. Conversion to json-schema of the Renesas EtherAVB DT bindings.
     Technically, the conversion is independent of all of the above.
     I included it in this series, as it shows how all sanity checks on
     "[rt]x-internal-delay-ps" values are implemented as DT binding
     checks,
  3. EtherAVB driver update implementing support for the new properties.

Given Rob has provided his acks for the DT binding updates, all of this
can be merged through net-next.

Changes compared to v3[4]:
  - Add Reviewed-by,
  - Drop the DT updates, as they will be merged through renesas-devel and
    arm-soc, and have a hard dependency on this series.

Changes compared to v2[5]:
  - Update recently added board DTS files,
  - Add Reviewed-by.

Changes compared to v1[6]:
  - Added "[PATCH 1/7] dt-bindings: net: ethernet-controller: Add
    internal delay properties",
  - Replace "renesas,[rt]xc-delay-ps" by "[rt]x-internal-delay-ps",
  - Incorporated EtherAVB DT binding conversion to json-schema,
  - Add Reviewed-by.

Impacted, tested:
  - Salvator-X(S) with R-Car H3 ES1.0 and ES2.0, M3-W, and M3-N.

Not impacted, tested:
  - Ebisu with R-Car E3.

Impacted, not tested:
  - Salvator-X(S) with other SoC variants,
  - ULCB with R-Car H3/M3-W/M3-N variants,
  - V3MSK and Eagle with R-Car V3M,
  - Draak with R-Car V3H,
  - HiHope RZ/G2[MN] with RZ/G2M or RZ/G2N,
  - Beacon EmbeddedWorks RZ/G2M Development Kit.

To ease testing, I have pushed this series and the DT updates to the
topic/ravb-internal-clock-delays-v4 branch of my renesas-drivers
repository at
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git.

Thanks for applying!

References:
  [1] Commit bcf3440c6dd78bfe ("net: phy: micrel: add phy-mode support
      for the KSZ9031 PHY")
  [2] Commit 9b23203c32ee02cd ("ravb: Mask PHY mode to avoid inserting
      delays twice").
      https://lore.kernel.org/r/20200529122540.31368-1-geert+renesas@glider.be/
  [3] https://lore.kernel.org/r/CAMuHMdU+MR-2tr3-pH55G0GqPG9HwH3XUd=8HZxprFDMGQeWUw@mail.gmail.com/
  [4] https://lore.kernel.org/linux-devicetree/20200819134344.27813-1-geert+renesas@glider.be/
  [5] https://lore.kernel.org/linux-devicetree/20200706143529.18306-1-geert+renesas@glider.be/
  [6] https://lore.kernel.org/linux-devicetree/20200619191554.24942-1-geert+renesas@glider.be/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

5 files changed, 320 insertions, 147 deletions

diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
index fa2baca8c726..137fbb95c0ea 100644
--- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml
@@ -120,6 +120,13 @@ properties:
       and is useful for determining certain configuration settings
       such as flow control thresholds.
 
+  rx-internal-delay-ps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Receive Clock Delay defined in pico seconds.
+      This is used for controllers that have configurable RX internal delays.
+      If this property is present then the MAC applies the RX delay.
+
   sfp:
     $ref: /schemas/types.yaml#definitions/phandle
     description:
@@ -131,6 +138,13 @@ properties:
       The size of the controller\'s transmit fifo in bytes. This
       is used for components that can have configurable fifo sizes.
 
+  tx-internal-delay-ps:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      RGMII Transmit Clock Delay defined in pico seconds.
+      This is used for controllers that have configurable TX internal delays.
+      If this property is present then the MAC applies the TX delay.
+
   managed:
     description:
       Specifies the PHY management type. If auto is set and fixed-link
diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
new file mode 100644
index 000000000000..e13653051b23
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml
@@ -0,0 +1,261 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/renesas,etheravb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Ethernet AVB
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@gmail.com>
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - renesas,etheravb-r8a7742      # RZ/G1H
+              - renesas,etheravb-r8a7743      # RZ/G1M
+              - renesas,etheravb-r8a7744      # RZ/G1N
+              - renesas,etheravb-r8a7745      # RZ/G1E
+              - renesas,etheravb-r8a77470     # RZ/G1C
+              - renesas,etheravb-r8a7790      # R-Car H2
+              - renesas,etheravb-r8a7791      # R-Car M2-W
+              - renesas,etheravb-r8a7792      # R-Car V2H
+              - renesas,etheravb-r8a7793      # R-Car M2-N
+              - renesas,etheravb-r8a7794      # R-Car E2
+          - const: renesas,etheravb-rcar-gen2 # R-Car Gen2 and RZ/G1
+
+      - items:
+          - enum:
+              - renesas,etheravb-r8a774a1     # RZ/G2M
+              - renesas,etheravb-r8a774b1     # RZ/G2N
+              - renesas,etheravb-r8a774c0     # RZ/G2E
+              - renesas,etheravb-r8a7795      # R-Car H3
+              - renesas,etheravb-r8a7796      # R-Car M3-W
+              - renesas,etheravb-r8a77961     # R-Car M3-W+
+              - renesas,etheravb-r8a77965     # R-Car M3-N
+              - renesas,etheravb-r8a77970     # R-Car V3M
+              - renesas,etheravb-r8a77980     # R-Car V3H
+              - renesas,etheravb-r8a77990     # R-Car E3
+              - renesas,etheravb-r8a77995     # R-Car D3
+          - const: renesas,etheravb-rcar-gen3 # R-Car Gen3 and RZ/G2
+
+  reg: true
+
+  interrupts: true
+
+  interrupt-names: true
+
+  clocks:
+    maxItems: 1
+
+  iommus:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  phy-mode: true
+
+  phy-handle: true
+
+  '#address-cells':
+    description: Number of address cells for the MDIO bus.
+    const: 1
+
+  '#size-cells':
+    description: Number of size cells on the MDIO bus.
+    const: 0
+
+  renesas,no-ether-link:
+    type: boolean
+    description:
+      Specify when a board does not provide a proper AVB_LINK signal.
+
+  renesas,ether-link-active-low:
+    type: boolean
+    description:
+      Specify when the AVB_LINK signal is active-low instead of normal
+      active-high.
+
+  rx-internal-delay-ps:
+    enum: [0, 1800]
+
+  tx-internal-delay-ps:
+    enum: [0, 2000]
+
+patternProperties:
+  "^ethernet-phy@[0-9a-f]$":
+    type: object
+    $ref: ethernet-phy.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - power-domains
+  - resets
+  - phy-mode
+  - phy-handle
+  - '#address-cells'
+  - '#size-cells'
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-rcar-gen2
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+    then:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+            - description: Stream buffer
+    else:
+      properties:
+        reg:
+          items:
+            - description: MAC register block
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-rcar-gen2
+    then:
+      properties:
+        interrupts:
+          maxItems: 1
+        interrupt-names:
+          items:
+            - const: mux
+        rx-internal-delay-ps: false
+    else:
+      properties:
+        interrupts:
+          minItems: 25
+          maxItems: 25
+        interrupt-names:
+          items:
+            pattern: '^ch[0-9]+$'
+      required:
+        - interrupt-names
+        - rx-internal-delay-ps
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - renesas,etheravb-r8a774a1
+              - renesas,etheravb-r8a774b1
+              - renesas,etheravb-r8a7795
+              - renesas,etheravb-r8a7796
+              - renesas,etheravb-r8a77961
+              - renesas,etheravb-r8a77965
+              - renesas,etheravb-r8a77970
+              - renesas,etheravb-r8a77980
+    then:
+      required:
+        - tx-internal-delay-ps
+    else:
+      properties:
+        tx-internal-delay-ps: false
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77995
+    then:
+      properties:
+        rx-internal-delay-ps:
+          const: 1800
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: renesas,etheravb-r8a77980
+    then:
+      properties:
+        tx-internal-delay-ps:
+          const: 2000
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/r8a7795-cpg-mssr.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/power/r8a7795-sysc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    aliases {
+            ethernet0 = &avb;
+    };
+
+    avb: ethernet@e6800000 {
+            compatible = "renesas,etheravb-r8a7795",
+                         "renesas,etheravb-rcar-gen3";
+            reg = <0xe6800000 0x800>, <0xe6a00000 0x10000>;
+            interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6",
+                              "ch7", "ch8", "ch9", "ch10", "ch11", "ch12",
+                              "ch13", "ch14", "ch15", "ch16", "ch17", "ch18",
+                              "ch19", "ch20", "ch21", "ch22", "ch23", "ch24";
+            clocks = <&cpg CPG_MOD 812>;
+            iommus = <&ipmmu_ds0 16>;
+            power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+            resets = <&cpg 812>;
+            phy-mode = "rgmii";
+            phy-handle = <&phy0>;
+            rx-internal-delay-ps = <0>;
+            tx-internal-delay-ps = <2000>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            phy0: ethernet-phy@0 {
+                    rxc-skew-ps = <1500>;
+                    reg = <0>;
+                    interrupt-parent = <&gpio2>;
+                    interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+                    reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
deleted file mode 100644
index 032b76f14f4f..000000000000
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ /dev/null
@@ -1,134 +0,0 @@
-* Renesas Electronics Ethernet AVB
-
-This file provides information on what the device node for the Ethernet AVB
-interface contains.
-
-Required properties:
-- compatible: Must contain one or more of the following:
-      - "renesas,etheravb-r8a7742" for the R8A7742 SoC.
-      - "renesas,etheravb-r8a7743" for the R8A7743 SoC.
-      - "renesas,etheravb-r8a7744" for the R8A7744 SoC.
-      - "renesas,etheravb-r8a7745" for the R8A7745 SoC.
-      - "renesas,etheravb-r8a77470" for the R8A77470 SoC.
-      - "renesas,etheravb-r8a7790" for the R8A7790 SoC.
-      - "renesas,etheravb-r8a7791" for the R8A7791 SoC.
-      - "renesas,etheravb-r8a7792" for the R8A7792 SoC.
-      - "renesas,etheravb-r8a7793" for the R8A7793 SoC.
-      - "renesas,etheravb-r8a7794" for the R8A7794 SoC.
-      - "renesas,etheravb-rcar-gen2" as a fallback for the above
-		R-Car Gen2 and RZ/G1 devices.
-
-      - "renesas,etheravb-r8a774a1" for the R8A774A1 SoC.
-      - "renesas,etheravb-r8a774b1" for the R8A774B1 SoC.
-      - "renesas,etheravb-r8a774c0" for the R8A774C0 SoC.
-      - "renesas,etheravb-r8a7795" for the R8A7795 SoC.
-      - "renesas,etheravb-r8a7796" for the R8A77960 SoC.
-      - "renesas,etheravb-r8a77961" for the R8A77961 SoC.
-      - "renesas,etheravb-r8a77965" for the R8A77965 SoC.
-      - "renesas,etheravb-r8a77970" for the R8A77970 SoC.
-      - "renesas,etheravb-r8a77980" for the R8A77980 SoC.
-      - "renesas,etheravb-r8a77990" for the R8A77990 SoC.
-      - "renesas,etheravb-r8a77995" for the R8A77995 SoC.
-      - "renesas,etheravb-rcar-gen3" as a fallback for the above
-		R-Car Gen3 and RZ/G2 devices.
-
-	When compatible with the generic version, nodes must list the
-	SoC-specific version corresponding to the platform first followed by
-	the generic version.
-
-- reg: Offset and length of (1) the register block and (2) the stream buffer.
-       The region for the register block is mandatory.
-       The region for the stream buffer is optional, as it is only present on
-       R-Car Gen2 and RZ/G1 SoCs, and on R-Car H3 (R8A7795), M3-W (R8A77960),
-       M3-W+ (R8A77961), and M3-N (R8A77965).
-- interrupts: A list of interrupt-specifiers, one for each entry in
-	      interrupt-names.
-	      If interrupt-names is not present, an interrupt specifier
-	      for a single muxed interrupt.
-- phy-mode: see ethernet.txt file in the same directory.
-- phy-handle: see ethernet.txt file in the same directory.
-- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
-- #size-cells: number of size cells on the MDIO bus, must be equal to 0.
-- clocks: clock phandle and specifier pair.
-- pinctrl-0: phandle, referring to a default pin configuration node.
-
-Optional properties:
-- interrupt-names: A list of interrupt names.
-		   For the R-Car Gen 3 SoCs this property is mandatory;
-		   it should include one entry per channel, named "ch%u",
-		   where %u is the channel number ranging from 0 to 24.
-		   For other SoCs this property is optional; if present
-		   it should contain "mux" for a single muxed interrupt.
-- pinctrl-names: pin configuration state name ("default").
-- renesas,no-ether-link: boolean, specify when a board does not provide a proper
-			 AVB_LINK signal.
-- renesas,ether-link-active-low: boolean, specify when the AVB_LINK signal is
-				 active-low instead of normal active-high.
-
-Example:
-
-	ethernet@e6800000 {
-		compatible = "renesas,etheravb-r8a7795", "renesas,etheravb-rcar-gen3";
-		reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
-		interrupt-parent = <&gic>;
-		interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "ch0", "ch1", "ch2", "ch3",
-				  "ch4", "ch5", "ch6", "ch7",
-				  "ch8", "ch9", "ch10", "ch11",
-				  "ch12", "ch13", "ch14", "ch15",
-				  "ch16", "ch17", "ch18", "ch19",
-				  "ch20", "ch21", "ch22", "ch23",
-				  "ch24";
-		clocks = <&cpg CPG_MOD 812>;
-		power-domains = <&cpg>;
-		phy-mode = "rgmii-id";
-		phy-handle = <&phy0>;
-
-		pinctrl-0 = <&ether_pins>;
-		pinctrl-names = "default";
-		renesas,no-ether-link;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		phy0: ethernet-phy@0 {
-			rxc-skew-ps = <900>;
-			rxdv-skew-ps = <0>;
-			rxd0-skew-ps = <0>;
-			rxd1-skew-ps = <0>;
-			rxd2-skew-ps = <0>;
-			rxd3-skew-ps = <0>;
-			txc-skew-ps = <900>;
-			txen-skew-ps = <0>;
-			txd0-skew-ps = <0>;
-			txd1-skew-ps = <0>;
-			txd2-skew-ps = <0>;
-			txd3-skew-ps = <0>;
-			reg = <0>;
-			interrupt-parent = <&gpio2>;
-			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-		};
-	};
diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index 9f88b5db4f89..7453b17a37a2 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -1036,7 +1036,10 @@ struct ravb_private {
 	unsigned no_avb_link:1;
 	unsigned avb_link_active_low:1;
 	unsigned wol_enabled:1;
-	int num_tx_desc;	/* TX descriptors per packet */
+	unsigned rxcidm:1;		/* RX Clock Internal Delay Mode */
+	unsigned txcidm:1;		/* TX Clock Internal Delay Mode */
+	unsigned rgmii_override:1;	/* Deprecated rgmii-*id behavior */
+	int num_tx_desc;		/* TX descriptors per packet */
 };
 
 static inline u32 ravb_read(struct net_device *ndev, enum ravb_reg reg)
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index f684296df871..5082c16bf9c0 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -1034,11 +1034,8 @@ static int ravb_phy_init(struct net_device *ndev)
 		pn = of_node_get(np);
 	}
 
-	iface = priv->phy_interface;
-	if (priv->chip_id != RCAR_GEN2 && phy_interface_mode_is_rgmii(iface)) {
-		/* ravb_set_delay_mode() takes care of internal delay mode */
-		iface = PHY_INTERFACE_MODE_RGMII;
-	}
+	iface = priv->rgmii_override ? PHY_INTERFACE_MODE_RGMII
+				     : priv->phy_interface;
 	phydev = of_phy_connect(ndev, pn, ravb_adjust_link, 0, iface);
 	of_node_put(pn);
 	if (!phydev) {
@@ -1999,23 +1996,53 @@ static const struct soc_device_attribute ravb_delay_mode_quirk_match[] = {
 };
 
 /* Set tx and rx clock internal delay modes */
-static void ravb_set_delay_mode(struct net_device *ndev)
+static void ravb_parse_delay_mode(struct device_node *np, struct net_device *ndev)
 {
 	struct ravb_private *priv = netdev_priv(ndev);
-	int set = 0;
+	bool explicit_delay = false;
+	u32 delay;
+
+	if (!of_property_read_u32(np, "rx-internal-delay-ps", &delay)) {
+		/* Valid values are 0 and 1800, according to DT bindings */
+		priv->rxcidm = !!delay;
+		explicit_delay = true;
+	}
+	if (!of_property_read_u32(np, "tx-internal-delay-ps", &delay)) {
+		/* Valid values are 0 and 2000, according to DT bindings */
+		priv->txcidm = !!delay;
+		explicit_delay = true;
+	}
 
+	if (explicit_delay)
+		return;
+
+	/* Fall back to legacy rgmii-*id behavior */
 	if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
-	    priv->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID)
-		set |= APSR_DM_RDM;
+	    priv->phy_interface == PHY_INTERFACE_MODE_RGMII_RXID) {
+		priv->rxcidm = 1;
+		priv->rgmii_override = 1;
+	}
 
 	if (priv->phy_interface == PHY_INTERFACE_MODE_RGMII_ID ||
 	    priv->phy_interface == PHY_INTERFACE_MODE_RGMII_TXID) {
 		if (!WARN(soc_device_match(ravb_delay_mode_quirk_match),
 			  "phy-mode %s requires TX clock internal delay mode which is not supported by this hardware revision. Please update device tree",
-			  phy_modes(priv->phy_interface)))
-			set |= APSR_DM_TDM;
+			  phy_modes(priv->phy_interface))) {
+			priv->txcidm = 1;
+			priv->rgmii_override = 1;
+		}
 	}
+}
+
+static void ravb_set_delay_mode(struct net_device *ndev)
+{
+	struct ravb_private *priv = netdev_priv(ndev);
+	u32 set = 0;
 
+	if (priv->rxcidm)
+		set |= APSR_DM_RDM;
+	if (priv->txcidm)
+		set |= APSR_DM_TDM;
 	ravb_modify(ndev, APSR, APSR_DM, set);
 }
 
@@ -2148,8 +2175,10 @@ static int ravb_probe(struct platform_device *pdev)
 	/* Request GTI loading */
 	ravb_modify(ndev, GCCR, GCCR_LTI, GCCR_LTI);
 
-	if (priv->chip_id != RCAR_GEN2)
+	if (priv->chip_id != RCAR_GEN2) {
+		ravb_parse_delay_mode(np, ndev);
 		ravb_set_delay_mode(ndev);
+	}
 
 	/* Allocate descriptor base address table */
 	priv->desc_bat_size = sizeof(struct ravb_desc) * DBAT_ENTRY_NUM;