diff options
| author | Sergei Shtylyov | 2008-04-29 23:33:47 +0400 |
|---|---|---|
| committer | Ralf Baechle | 2008-05-12 16:46:56 +0100 |
| commit | cb0e8b0fba53e1aa6c4786bc465cfc641e8a77e7 (patch) | |
| tree | 9d75c409db0434ce2f6b1830fb1901567b55299a | |
| parent | 005ca9a3f1238ffebd9c4d09d581f708277d2985 (diff) | |
[MIPS] Pb1000: bury the remnants of the PCI code
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
| -rw-r--r-- | arch/mips/au1000/pb1000/board_setup.c | 7 |
1 files changed, 0 insertions, 7 deletions
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c index a06c653596cb..25df167a95b3 100644 --- a/arch/mips/au1000/pb1000/board_setup.c +++ b/arch/mips/au1000/pb1000/board_setup.c @@ -145,13 +145,6 @@ void __init board_setup(void) au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */ au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */ -#ifdef CONFIG_PCI - au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0 - au_writel(0, SDRAM_MBAR); // set mbar to 0 - au_writel(0x2, SDRAM_CMD); // enable memory accesses - au_sync_delay(1); -#endif - /* * Enable Au1000 BCLK switching - note: sed1356 must not use * its BCLK (Au1000 LCLK) for any timings |