aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMauro Carvalho Chehab2007-11-24 10:13:42 -0300
committerMauro Carvalho Chehab2008-01-25 19:02:51 -0200
commit00deff1a076dc1cf6743813657623626720bf0f5 (patch)
treecc217f5d6f44bbdc25903433967209e9aac23f26
parentf36224d3992a7734349cdd6289ff73c3d007ce09 (diff)
V4L/DVB (6671): Avoids checking digital/analog at check_firmware
Since check_firmware is called via analog or digital set freq routines, move type selection to those routines. This avoids having several if's at the code, and simplifies the source code. A sideback effect is that implementing radio and other dvb types will become simpler. Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
-rw-r--r--drivers/media/video/tuner-xc2028.c106
1 files changed, 50 insertions, 56 deletions
diff --git a/drivers/media/video/tuner-xc2028.c b/drivers/media/video/tuner-xc2028.c
index 1f14892a883a..94f367ab5718 100644
--- a/drivers/media/video/tuner-xc2028.c
+++ b/drivers/media/video/tuner-xc2028.c
@@ -608,15 +608,14 @@ static int load_scode(struct dvb_frontend *fe, unsigned int type,
return 0;
}
-static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode,
- v4l2_std_id std, fe_bandwidth_t bandwidth)
+static int check_firmware(struct dvb_frontend *fe, unsigned int type,
+ v4l2_std_id std)
{
- struct xc2028_data *priv = fe->tuner_priv;
- int rc = 0, is_retry = 0;
- unsigned int type = 0;
+ struct xc2028_data *priv = fe->tuner_priv;
struct firmware_properties new_fw;
- u16 version, hwmodel;
- v4l2_std_id std0;
+ int rc = 0, is_retry = 0;
+ u16 version, hwmodel;
+ v4l2_std_id std0;
tuner_dbg("%s called\n", __FUNCTION__);
@@ -633,32 +632,6 @@ static int check_firmware(struct dvb_frontend *fe, enum tuner_mode new_mode,
if (priv->ctrl.mts)
type |= MTS;
- if (bandwidth == BANDWIDTH_7_MHZ || bandwidth == BANDWIDTH_8_MHZ)
- type |= F8MHZ;
-
- /* FIXME: How to load FM and FM|INPUT1 firmwares? */
-
- if (new_mode == T_DIGITAL_TV) {
- if (priv->ctrl.d2633)
- type |= D2633;
- else
- type |= D2620;
-
- switch (bandwidth) {
- case BANDWIDTH_8_MHZ:
- type |= DTV8;
- break;
- case BANDWIDTH_7_MHZ:
- type |= DTV7;
- break;
- case BANDWIDTH_6_MHZ:
- /* FIXME: Should allow select also ATSC */
- type |= DTV6 | QAM;
- break;
- default:
- tuner_err("error: bandwidth not supported.\n");
- };
- }
retry:
new_fw.type = type;
@@ -729,10 +702,6 @@ skip_base:
/* Reloading std-specific firmware forces a SCODE update */
priv->cur_fw.scode_table = 0;
- /* Add audio hack to std mask */
- if (new_mode == T_ANALOG_TV)
- new_fw.id |= parse_audio_std_option();
-
rc = load_firmware(fe, new_fw.type, &new_fw.id);
if (rc == -ENOENT)
rc = load_firmware(fe, new_fw.type & ~F8MHZ, &new_fw.id);
@@ -840,9 +809,10 @@ ret:
#define DIV 15625
-static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ ,
+static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
enum tuner_mode new_mode,
- v4l2_std_id std, fe_bandwidth_t bandwidth)
+ unsigned int type,
+ v4l2_std_id std)
{
struct xc2028_data *priv = fe->tuner_priv;
int rc = -EINVAL;
@@ -855,7 +825,7 @@ static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ ,
tuner_dbg("should set frequency %d kHz\n", freq / 1000);
- if (check_firmware(fe, new_mode, std, bandwidth) < 0)
+ if (check_firmware(fe, type, std) < 0)
goto ret;
/* On some cases xc2028 can disable video output, if
@@ -865,10 +835,9 @@ static int generic_set_tv_freq(struct dvb_frontend *fe, u32 freq /* in Hz */ ,
* that xc2028 will be in a safe state.
* Maybe this might also be needed for DTV.
*/
- if (new_mode != T_DIGITAL_TV)
+ if (new_mode == T_ANALOG_TV) {
rc = send_seq(priv, {0x00, 0x00});
-
- if (new_mode == T_DIGITAL_TV) {
+ } else {
offset = 2750000;
if (priv->cur_fw.type & DTV7)
offset -= 500000;
@@ -914,32 +883,35 @@ ret:
return rc;
}
-static int xc2028_set_tv_freq(struct dvb_frontend *fe,
+static int xc2028_set_analog_freq(struct dvb_frontend *fe,
struct analog_parameters *p)
{
struct xc2028_data *priv = fe->tuner_priv;
- fe_bandwidth_t bw;
+ unsigned int type=0;
+
+ tuner_dbg("%s called\n", __FUNCTION__);
/* if std is not defined, choose one */
if (!p->std)
p->std = V4L2_STD_MN;
/* PAL/M, PAL/N, PAL/Nc and NTSC variants should use 6MHz firmware */
- if (p->std & V4L2_STD_MN)
- bw = BANDWIDTH_6_MHZ;
- else
- bw = BANDWIDTH_8_MHZ;
+ if (!(p->std & V4L2_STD_MN))
+ type |= F8MHZ;
- tuner_dbg("%s called\n", __FUNCTION__);
+ /* Add audio hack to std mask */
+ p->std |= parse_audio_std_option();
- return generic_set_tv_freq(fe, 62500l * p->frequency, T_ANALOG_TV,
- p->std, bw);
+ return generic_set_freq(fe, 62500l * p->frequency,
+ T_ANALOG_TV, type, p->std);
}
static int xc2028_set_params(struct dvb_frontend *fe,
struct dvb_frontend_parameters *p)
{
struct xc2028_data *priv = fe->tuner_priv;
+ unsigned int type=0;
+ fe_bandwidth_t bw;
tuner_dbg("%s called\n", __FUNCTION__);
@@ -948,11 +920,33 @@ static int xc2028_set_params(struct dvb_frontend *fe,
tuner_err("DTV type not implemented.\n");
return -EINVAL;
}
+ bw = p->u.ofdm.bandwidth;
- return generic_set_tv_freq(fe, p->frequency, T_DIGITAL_TV,
- 0 /* NOT USED */,
- p->u.ofdm.bandwidth);
+ if (bw == BANDWIDTH_7_MHZ || bw == BANDWIDTH_8_MHZ)
+ type |= F8MHZ;
+ if (priv->ctrl.d2633)
+ type |= D2633;
+ else
+ type |= D2620;
+
+ switch (bw) {
+ case BANDWIDTH_8_MHZ:
+ type |= DTV8;
+ break;
+ case BANDWIDTH_7_MHZ:
+ type |= DTV7;
+ break;
+ case BANDWIDTH_6_MHZ:
+ /* FIXME: Should allow select also ATSC */
+ type |= DTV6 | QAM;
+ break;
+ default:
+ tuner_err("error: bandwidth not supported.\n");
+ };
+
+ return generic_set_freq(fe, p->frequency,
+ T_DIGITAL_TV, type, 0);
}
static int xc2028_sleep(struct dvb_frontend *fe)
@@ -1052,7 +1046,7 @@ static const struct dvb_tuner_ops xc2028_dvb_tuner_ops = {
},
.set_config = xc2028_set_config,
- .set_analog_params = xc2028_set_tv_freq,
+ .set_analog_params = xc2028_set_analog_freq,
.release = xc2028_dvb_release,
.get_frequency = xc2028_get_frequency,
.get_rf_strength = xc2028_signal,