aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorLinus Torvalds2017-11-14 16:49:31 -0800
committerLinus Torvalds2017-11-14 16:49:31 -0800
commit23c258763ba992f6a95a4b8980ffa7c1890bc8d8 (patch)
tree7f089cb2c2a3f01ff071bca2dc9cc4e2b939a8c4
parente0ca3826b147a7ada526856af25a87c8ffad489f (diff)
parentcecd5fc5512349662b9e7a9e06231055d803e3f6 (diff)
Merge tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine updates from Vinod Koul: "Updates for this cycle include: - new driver for Spreadtrum dma controller, ST MDMA and DMAMUX controllers - PM support for IMG MDC drivers - updates to bcm-sba-raid driver and improvements to sun6i driver - subsystem conversion for: - timers to use timer_setup() - remove usage of PCI pool API - usage of %p format specifier - minor updates to bunch of drivers" * tag 'dmaengine-4.15-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (49 commits) dmaengine: ti-dma-crossbar: Correct am335x/am43xx mux value type dmaengine: dmatest: warn user when dma test times out dmaengine: Revert "rcar-dmac: use TCRB instead of TCR for residue" dmaengine: stm32_mdma: activate pack/unpack feature dmaengine: at_hdmac: Remove unnecessary 0x prefixes before %pad dmaengine: coh901318: Remove unnecessary 0x prefixes before %pad MAINTAINERS: Step down from a co-maintaner of DW DMAC driver dmaengine: pch_dma: Replace PCI pool old API dmaengine: Convert timers to use timer_setup() dmaengine: sprd: Add Spreadtrum DMA driver dt-bindings: dmaengine: Add Spreadtrum SC9860 DMA controller dmaengine: sun6i: Retrieve channel count/max request from devicetree dmaengine: Build bcm-sba-raid driver as loadable module for iProc SoCs dmaengine: bcm-sba-raid: Use common GPL comment header dmaengine: bcm-sba-raid: Use only single mailbox channel dmaengine: bcm-sba-raid: serialize dma_cookie_complete() using reqs_lock dmaengine: pl330: fix descriptor allocation fail dmaengine: rcar-dmac: use TCRB instead of TCR for residue dmaengine: sun6i: Add support for Allwinner A64 and compatibles arm64: allwinner: a64: Add devicetree binding for DMA controller ...
-rw-r--r--Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/sprd-dma.txt41
-rw-r--r--Documentation/devicetree/bindings/dma/stm32-dma.txt4
-rw-r--r--Documentation/devicetree/bindings/dma/stm32-dmamux.txt84
-rw-r--r--Documentation/devicetree/bindings/dma/stm32-mdma.txt94
-rw-r--r--Documentation/devicetree/bindings/dma/sun6i-dma.txt26
-rw-r--r--MAINTAINERS2
-rw-r--r--drivers/dma/Kconfig31
-rw-r--r--drivers/dma/Makefile3
-rw-r--r--drivers/dma/at_hdmac_regs.h2
-rw-r--r--drivers/dma/bcm-sba-raid.c117
-rw-r--r--drivers/dma/coh901318.c6
-rw-r--r--drivers/dma/dma-axi-dmac.c75
-rw-r--r--drivers/dma/dmatest.c1
-rw-r--r--drivers/dma/edma.c5
-rw-r--r--drivers/dma/img-mdc-dma.c98
-rw-r--r--drivers/dma/imx-dma.c8
-rw-r--r--drivers/dma/imx-sdma.c14
-rw-r--r--drivers/dma/ioat/dma.c6
-rw-r--r--drivers/dma/ioat/dma.h3
-rw-r--r--drivers/dma/ioat/init.c2
-rw-r--r--drivers/dma/nbpfaxi.c5
-rw-r--r--drivers/dma/omap-dma.c5
-rw-r--r--drivers/dma/pch_dma.c12
-rw-r--r--drivers/dma/pl330.c39
-rw-r--r--drivers/dma/qcom/bam_dma.c169
-rw-r--r--drivers/dma/sa11x0-dma.c11
-rw-r--r--drivers/dma/sprd-dma.c988
-rw-r--r--drivers/dma/stm32-dmamux.c327
-rw-r--r--drivers/dma/stm32-mdma.c1682
-rw-r--r--drivers/dma/sun6i-dma.c257
-rw-r--r--drivers/dma/ti-dma-crossbar.c8
-rw-r--r--drivers/dma/xilinx/xilinx_dma.c14
-rw-r--r--include/linux/dma/xilinx_dma.h14
-rw-r--r--include/linux/dmaengine.h30
35 files changed, 3865 insertions, 320 deletions
diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
index 1be6941ac1e5..f3d1f151ba80 100644
--- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt
@@ -3,6 +3,8 @@
Required Properties:
-compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback.
Examples with soctypes are:
+ - "renesas,r8a7743-usb-dmac" (RZ/G1M)
+ - "renesas,r8a7745-usb-dmac" (RZ/G1E)
- "renesas,r8a7790-usb-dmac" (R-Car H2)
- "renesas,r8a7791-usb-dmac" (R-Car M2-W)
- "renesas,r8a7793-usb-dmac" (R-Car M2-N)
diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt
new file mode 100644
index 000000000000..7a10fea2e51b
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt
@@ -0,0 +1,41 @@
+* Spreadtrum DMA controller
+
+This binding follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+- compatible: Should be "sprd,sc9860-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel.
+- #dma-cells: must be <1>. Used to represent the number of integer
+ cells in the dmas property of client device.
+- #dma-channels : Number of DMA channels supported. Should be 32.
+- clock-names: Should contain the clock of the DMA controller.
+- clocks: Should contain a clock specifier for each entry in clock-names.
+
+Example:
+
+Controller:
+apdma: dma-controller@20100000 {
+ compatible = "sprd,sc9860-dma";
+ reg = <0x20100000 0x4000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <32>;
+ clock-names = "enable";
+ clocks = <&clk_ap_ahb_gates 5>;
+};
+
+
+Client:
+DMA clients connected to the Spreadtrum DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each channel.
+The two cells in order are:
+1. A phandle pointing to the DMA controller.
+2. The channel id.
+
+spi0: spi@70a00000{
+ ...
+ dma-names = "rx_chn", "tx_chn";
+ dmas = <&apdma 11>, <&apdma 12>;
+ ...
+};
diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt
index 6f44df94101c..0b55718bf889 100644
--- a/Documentation/devicetree/bindings/dma/stm32-dma.txt
+++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt
@@ -13,6 +13,7 @@ Required properties:
- #dma-cells : Must be <4>. See DMA client paragraph for more details.
Optional properties:
+- dma-requests : Number of DMA requests supported.
- resets: Reference to a reset controller asserting the DMA controller
- st,mem2mem: boolean; if defined, it indicates that the controller supports
memory-to-memory transfer
@@ -34,12 +35,13 @@ Example:
#dma-cells = <4>;
st,mem2mem;
resets = <&rcc 150>;
+ dma-requests = <8>;
};
* DMA client
DMA clients connected to the STM32 DMA controller must use the format
-described in the dma.txt file, using a five-cell specifier for each
+described in the dma.txt file, using a four-cell specifier for each
channel: a phandle to the DMA controller plus the following four integer cells:
1. The channel id
diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
new file mode 100644
index 000000000000..1b893b235507
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt
@@ -0,0 +1,84 @@
+STM32 DMA MUX (DMA request router)
+
+Required properties:
+- compatible: "st,stm32h7-dmamux"
+- reg: Memory map for accessing module
+- #dma-cells: Should be set to <3>.
+ First parameter is request line number.
+ Second is DMA channel configuration
+ Third is Fifo threshold
+ For more details about the three cells, please see
+ stm32-dma.txt documentation binding file
+- dma-masters: Phandle pointing to the DMA controllers.
+ Several controllers are allowed. Only "st,stm32-dma" DMA
+ compatible are supported.
+
+Optional properties:
+- dma-channels : Number of DMA requests supported.
+- dma-requests : Number of DMAMUX requests supported.
+- resets: Reference to a reset controller asserting the DMA controller
+- clocks: Input clock of the DMAMUX instance.
+
+Example:
+
+/* DMA controller 1 */
+dma1: dma-controller@40020000 {
+ compatible = "st,stm32-dma";
+ reg = <0x40020000 0x400>;
+ interrupts = <11>,
+ <12>,
+ <13>,
+ <14>,
+ <15>,
+ <16>,
+ <17>,
+ <47>;
+ clocks = <&timer_clk>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ resets = <&rcc 150>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+};
+
+/* DMA controller 1 */
+dma2: dma@40020400 {
+ compatible = "st,stm32-dma";
+ reg = <0x40020400 0x400>;
+ interrupts = <56>,
+ <57>,
+ <58>,
+ <59>,
+ <60>,
+ <68>,
+ <69>,
+ <70>;
+ clocks = <&timer_clk>;
+ #dma-cells = <4>;
+ st,mem2mem;
+ resets = <&rcc 150>;
+ dma-channels = <8>;
+ dma-requests = <8>;
+};
+
+/* DMA mux */
+dmamux1: dma-router@40020800 {
+ compatible = "st,stm32h7-dmamux";
+ reg = <0x40020800 0x3c>;
+ #dma-cells = <3>;
+ dma-requests = <128>;
+ dma-channels = <16>;
+ dma-masters = <&dma1 &dma2>;
+ clocks = <&timer_clk>;
+};
+
+/* DMA client */
+usart1: serial@40011000 {
+ compatible = "st,stm32-usart", "st,stm32-uart";
+ reg = <0x40011000 0x400>;
+ interrupts = <37>;
+ clocks = <&timer_clk>;
+ dmas = <&dmamux1 41 0x414 0>,
+ <&dmamux1 42 0x414 0>;
+ dma-names = "rx", "tx";
+};
diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
new file mode 100644
index 000000000000..d18772d6bc65
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt
@@ -0,0 +1,94 @@
+* STMicroelectronics STM32 MDMA controller
+
+The STM32 MDMA is a general-purpose direct memory access controller capable of
+supporting 64 independent DMA channels with 256 HW requests.
+
+Required properties:
+- compatible: Should be "st,stm32h7-mdma"
+- reg: Should contain MDMA registers location and length. This should include
+ all of the per-channel registers.
+- interrupts: Should contain the MDMA interrupt.
+- clocks: Should contain the input clock of the DMA instance.
+- resets: Reference to a reset controller asserting the DMA controller.
+- #dma-cells : Must be <5>. See DMA client paragraph for more details.
+
+Optional properties:
+- dma-channels: Number of DMA channels supported by the controller.
+- dma-requests: Number of DMA request signals supported by the controller.
+- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via
+ AHB bus.
+
+Example:
+
+ mdma1: dma@52000000 {
+ compatible = "st,stm32h7-mdma";
+ reg = <0x52000000 0x1000>;
+ interrupts = <122>;
+ clocks = <&timer_clk>;
+ resets = <&rcc 992>;
+ #dma-cells = <5>;
+ dma-channels = <16>;
+ dma-requests = <32>;
+ st,ahb-addr-masks = <0x20000000>, <0x00000000>;
+ };
+
+* DMA client
+
+DMA clients connected to the STM32 MDMA controller must use the format
+described in the dma.txt file, using a five-cell specifier for each channel:
+a phandle to the MDMA controller plus the following five integer cells:
+
+1. The request line number
+2. The priority level
+ 0x00: Low
+ 0x01: Medium
+ 0x10: High
+ 0x11: Very high
+3. A 32bit mask specifying the DMA channel configuration
+ -bit 0-1: Source increment mode
+ 0x00: Source address pointer is fixed
+ 0x10: Source address pointer is incremented after each data transfer
+ 0x11: Source address pointer is decremented after each data transfer
+ -bit 2-3: Destination increment mode
+ 0x00: Destination address pointer is fixed
+ 0x10: Destination address pointer is incremented after each data
+ transfer
+ 0x11: Destination address pointer is decremented after each data
+ transfer
+ -bit 8-9: Source increment offset size
+ 0x00: byte (8bit)
+ 0x01: half-word (16bit)
+ 0x10: word (32bit)
+ 0x11: double-word (64bit)
+ -bit 10-11: Destination increment offset size
+ 0x00: byte (8bit)
+ 0x01: half-word (16bit)
+ 0x10: word (32bit)
+ 0x11: double-word (64bit)
+-bit 25-18: The number of bytes to be transferred in a single transfer
+ (min = 1 byte, max = 128 bytes)
+-bit 29:28: Trigger Mode
+ 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes)
+ 0x01: Each MDMA request triggers a block transfer (max 64K bytes)
+ 0x10: Each MDMA request triggers a repeated block transfer
+ 0x11: Each MDMA request triggers a linked list transfer
+4. A 32bit value specifying the register to be used to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+5. A 32bit mask specifying the value to be written to acknowledge the request
+ if no HW ack signal is used by the MDMA client
+
+Example:
+
+ i2c4: i2c@5c002000 {
+ compatible = "st,stm32f7-i2c";
+ reg = <0x5c002000 0x400>;
+ interrupts = <95>,
+ <96>;
+ clocks = <&timer_clk>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>,
+ <&mdma1 37 0x0 0x40002 0x0 0x0>;
+ dma-names = "rx", "tx";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
index 98fbe1a5c6dd..9700b1d00fed 100644
--- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -27,6 +27,32 @@ Example:
#dma-cells = <1>;
};
+------------------------------------------------------------------------------
+For A64 DMA controller:
+
+Required properties:
+- compatible: "allwinner,sun50i-a64-dma"
+- dma-channels: Number of DMA channels supported by the controller.
+ Refer to Documentation/devicetree/bindings/dma/dma.txt
+- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells
+
+Optional properties:
+- dma-requests: Number of DMA request signals supported by the controller.
+ Refer to Documentation/devicetree/bindings/dma/dma.txt
+
+Example:
+ dma: dma-controller@1c02000 {
+ compatible = "allwinner,sun50i-a64-dma";
+ reg = <0x01c02000 0x1000>;
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>;
+ dma-channels = <8>;
+ dma-requests = <27>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+------------------------------------------------------------------------------
+
Clients:
DMA clients connected to the A31 DMA controller must use the format
diff --git a/MAINTAINERS b/MAINTAINERS
index 8604cf64a169..2a121c4c990d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12947,7 +12947,7 @@ F: Documentation/devicetree/bindings/arc/axs10*
SYNOPSYS DESIGNWARE DMAC DRIVER
M: Viresh Kumar <vireshk@kernel.org>
-M: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+R: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
S: Maintained
F: include/linux/dma/dw.h
F: include/linux/platform_data/dma-dw.h
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index fadc4d8783bd..27df3e2837fd 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -115,7 +115,7 @@ config BCM_SBA_RAID
select DMA_ENGINE_RAID
select ASYNC_TX_DISABLE_XOR_VAL_DMA
select ASYNC_TX_DISABLE_PQ_VAL_DMA
- default ARCH_BCM_IPROC
+ default m if ARCH_BCM_IPROC
help
Enable support for Broadcom SBA RAID Engine. The SBA RAID
engine is available on most of the Broadcom iProc SoCs. It
@@ -483,6 +483,35 @@ config STM32_DMA
If you have a board based on such a MCU and wish to use DMA say Y
here.
+config STM32_DMAMUX
+ bool "STMicroelectronics STM32 dma multiplexer support"
+ depends on STM32_DMA || COMPILE_TEST
+ help
+ Enable support for the on-chip DMA multiplexer on STMicroelectronics
+ STM32 MCUs.
+ If you have a board based on such a MCU and wish to use DMAMUX say Y
+ here.
+
+config STM32_MDMA
+ bool "STMicroelectronics STM32 master dma support"
+ depends on ARCH_STM32 || COMPILE_TEST
+ depends on OF
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ help
+ Enable support for the on-chip MDMA controller on STMicroelectronics
+ STM32 platforms.
+ If you have a board based on STM32 SoC and wish to use the master DMA
+ say Y here.
+
+config SPRD_DMA
+ tristate "Spreadtrum DMA support"
+ depends on ARCH_SPRD || COMPILE_TEST
+ select DMA_ENGINE
+ select DMA_VIRTUAL_CHANNELS
+ help
+ Enable support for the on-chip DMA controller on Spreadtrum platform.
+
config S3C24XX_DMAC
bool "Samsung S3C24XX DMA support"
depends on ARCH_S3C24XX || COMPILE_TEST
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 9d0156b50294..b9dca8a0e142 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -60,6 +60,9 @@ obj-$(CONFIG_RENESAS_DMA) += sh/
obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
obj-$(CONFIG_STM32_DMA) += stm32-dma.o
+obj-$(CONFIG_STM32_DMAMUX) += stm32-dmamux.o
+obj-$(CONFIG_STM32_MDMA) += stm32-mdma.o
+obj-$(CONFIG_SPRD_DMA) += sprd-dma.o
obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 7f58f06157f6..ef3f227ce3e6 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -385,7 +385,7 @@ static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
{
dev_crit(chan2dev(&atchan->chan_common),
- " desc: s%pad d%pad ctrl0x%x:0x%x l0x%pad\n",
+ "desc: s%pad d%pad ctrl0x%x:0x%x l%pad\n",
&lli->saddr, &lli->daddr,
lli->ctrla, lli->ctrlb, &lli->dscr);
}
diff --git a/drivers/dma/bcm-sba-raid.c b/drivers/dma/bcm-sba-raid.c
index 6c2c44724637..3956a018bf5a 100644
--- a/drivers/dma/bcm-sba-raid.c
+++ b/drivers/dma/bcm-sba-raid.c
@@ -1,9 +1,14 @@
/*
* Copyright (C) 2017 Broadcom
*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
*/
/*
@@ -25,11 +30,8 @@
*
* The Broadcom SBA RAID driver does not require any register programming
* except submitting request to SBA hardware device via mailbox channels.
- * This driver implements a DMA device with one DMA channel using a set
- * of mailbox channels provided by Broadcom SoC specific ring manager
- * driver. To exploit parallelism (as described above), all DMA request
- * coming to SBA RAID DMA channel are broken down to smaller requests
- * and submitted to multiple mailbox channels in round-robin fashion.
+ * This driver implements a DMA device with one DMA channel using a single
+ * mailbox channel provided by Broadcom SoC specific ring manager driver.
* For having more SBA DMA channels, we can create more SBA device nodes
* in Broadcom SoC specific DTS based on number of hardware rings supported
* by Broadcom SoC ring manager.
@@ -85,6 +87,7 @@
#define SBA_CMD_GALOIS 0xe
#define SBA_MAX_REQ_PER_MBOX_CHANNEL 8192
+#define SBA_MAX_MSG_SEND_PER_MBOX_CHANNEL 8
/* Driver helper macros */
#define to_sba_request(tx) \
@@ -142,9 +145,7 @@ struct sba_device {
u32 max_cmds_pool_size;
/* Maibox client and Mailbox channels */
struct mbox_client client;
- int mchans_count;
- atomic_t mchans_current;
- struct mbox_chan **mchans;
+ struct mbox_chan *mchan;
struct device *mbox_dev;
/* DMA device and DMA channel */
struct dma_device dma_dev;
@@ -200,14 +201,6 @@ static inline u32 __pure sba_cmd_pq_c_mdata(u32 d, u32 b1, u32 b0)
/* ====== General helper routines ===== */
-static void sba_peek_mchans(struct sba_device *sba)
-{
- int mchan_idx;
-
- for (mchan_idx = 0; mchan_idx < sba->mchans_count; mchan_idx++)
- mbox_client_peek_data(sba->mchans[mchan_idx]);
-}
-
static struct sba_request *sba_alloc_request(struct sba_device *sba)
{
bool found = false;
@@ -231,7 +224,7 @@ static struct sba_request *sba_alloc_request(struct sba_device *sba)
* would have completed which will create more
* room for new requests.
*/
- sba_peek_mchans(sba);
+ mbox_client_peek_data(sba->mchan);
return NULL;
}
@@ -369,15 +362,11 @@ static void sba_cleanup_pending_requests(struct sba_device *sba)
static int sba_send_mbox_request(struct sba_device *sba,
struct sba_request *req)
{
- int mchans_idx, ret = 0;
-
- /* Select mailbox channel in round-robin fashion */
- mchans_idx = atomic_inc_return(&sba->mchans_current);
- mchans_idx = mchans_idx % sba->mchans_count;
+ int ret = 0;
/* Send message for the request */
req->msg.error = 0;
- ret = mbox_send_message(sba->mchans[mchans_idx], &req->msg);
+ ret = mbox_send_message(sba->mchan, &req->msg);
if (ret < 0) {
dev_err(sba->dev, "send message failed with error %d", ret);
return ret;
@@ -390,7 +379,7 @@ static int sba_send_mbox_request(struct sba_device *sba,
}
/* Signal txdone for mailbox channel */
- mbox_client_txdone(sba->mchans[mchans_idx], ret);
+ mbox_client_txdone(sba->mchan, ret);
return ret;
}
@@ -402,13 +391,8 @@ static void _sba_process_pending_requests(struct sba_device *sba)
u32 count;
struct sba_request *req;
- /*
- * Process few pending requests
- *
- * For now, we process (<number_of_mailbox_channels> * 8)
- * number of requests at a time.
- */
- count = sba->mchans_count * 8;
+ /* Process few pending requests */
+ count = SBA_MAX_MSG_SEND_PER_MBOX_CHANNEL;
while (!list_empty(&sba->reqs_pending_list) && count) {
/* Get the first pending request */
req = list_first_entry(&sba->reqs_pending_list,
@@ -442,7 +426,9 @@ static void sba_process_received_request(struct sba_device *sba,
WARN_ON(tx->cookie < 0);
if (tx->cookie > 0) {
+ spin_lock_irqsave(&sba->reqs_lock, flags);
dma_cookie_complete(tx);
+ spin_unlock_irqrestore(&sba->reqs_lock, flags);
dmaengine_desc_get_callback_invoke(tx, NULL);
dma_descriptor_unmap(tx);
tx->callback = NULL;
@@ -570,7 +556,7 @@ static enum dma_status sba_tx_status(struct dma_chan *dchan,
if (ret == DMA_COMPLETE)
return ret;
- sba_peek_mchans(sba);
+ mbox_client_peek_data(sba->mchan);
return dma_cookie_status(dchan, cookie, txstate);
}
@@ -1637,7 +1623,7 @@ static int sba_async_register(struct sba_device *sba)
static int sba_probe(struct platform_device *pdev)
{
- int i, ret = 0, mchans_count;
+ int ret = 0;
struct sba_device *sba;
struct platform_device *mbox_pdev;
struct of_phandle_args args;
@@ -1650,12 +1636,11 @@ static int sba_probe(struct platform_device *pdev)
sba->dev = &pdev->dev;
platform_set_drvdata(pdev, sba);
- /* Number of channels equals number of mailbox channels */
+ /* Number of mailbox channels should be atleast 1 */
ret = of_count_phandle_with_args(pdev->dev.of_node,
"mboxes", "#mbox-cells");
if (ret <= 0)
return -ENODEV;
- mchans_count = ret;
/* Determine SBA version from DT compatible string */
if (of_device_is_compatible(sba->dev->of_node, "brcm,iproc-sba"))
@@ -1688,7 +1673,7 @@ static int sba_probe(struct platform_device *pdev)
default:
return -EINVAL;
}
- sba->max_req = SBA_MAX_REQ_PER_MBOX_CHANNEL * mchans_count;
+ sba->max_req = SBA_MAX_REQ_PER_MBOX_CHANNEL;
sba->max_cmd_per_req = sba->max_pq_srcs + 3;
sba->max_xor_srcs = sba->max_cmd_per_req - 1;
sba->max_resp_pool_size = sba->max_req * sba->hw_resp_size;
@@ -1702,55 +1687,30 @@ static int sba_probe(struct platform_device *pdev)
sba->client.knows_txdone = true;
sba->client.tx_tout = 0;
- /* Allocate mailbox channel array */
- sba->mchans = devm_kcalloc(&pdev->dev, mchans_count,
- sizeof(*sba->mchans), GFP_KERNEL);
- if (!sba->mchans)
- return -ENOMEM;
-
- /* Request mailbox channels */
- sba->mchans_count = 0;
- for (i = 0; i < mchans_count; i++) {
- sba->mchans[i] = mbox_request_channel(&sba->client, i);
- if (IS_ERR(sba->mchans[i])) {
- ret = PTR_ERR(sba->mchans[i]);
- goto fail_free_mchans;
- }
- sba->mchans_count++;
+ /* Request mailbox channel */
+ sba->mchan = mbox_request_channel(&sba->client, 0);
+ if (IS_ERR(sba->mchan)) {
+ ret = PTR_ERR(sba->mchan);
+ goto fail_free_mchan;
}
- atomic_set(&sba->mchans_current, 0);
/* Find-out underlying mailbox device */
ret = of_parse_phandle_with_args(pdev->dev.of_node,
"mboxes", "#mbox-cells", 0, &args);
if (ret)
- goto fail_free_mchans;
+ goto fail_free_mchan;
mbox_pdev = of_find_device_by_node(args.np);
of_node_put(args.np);
if (!mbox_pdev) {
ret = -ENODEV;
- goto fail_free_mchans;
+ goto fail_free_mchan;
}
sba->mbox_dev = &mbox_pdev->dev;
- /* All mailbox channels should be of same ring manager device */
- for (i = 1; i < mchans_count; i++) {
- ret = of_parse_phandle_with_args(pdev->dev.of_node,
- "mboxes", "#mbox-cells", i, &args);
- if (ret)
- goto fail_free_mchans;
- mbox_pdev = of_find_device_by_node(args.np);
- of_node_put(args.np);
- if (sba->mbox_dev != &mbox_pdev->dev) {
- ret = -EINVAL;
- goto fail_free_mchans;
- }
- }
-
/* Prealloc channel resource */
ret = sba_prealloc_channel_resources(sba);
if (ret)
- goto fail_free_mchans;
+ goto fail_free_mchan;
/* Check availability of debugfs */
if (!debugfs_initialized())
@@ -1777,24 +1737,22 @@ skip_debugfs:
goto fail_free_resources;
/* Print device info */
- dev_info(sba->dev, "%s using SBAv%d and %d mailbox channels",
+ dev_info(sba->dev, "%s using SBAv%d mailbox channel from %s",
dma_chan_name(&sba->dma_chan), sba->ver+1,
- sba->mchans_count);
+ dev_name(sba->mbox_dev));
return 0;
fail_free_resources:
debugfs_remove_recursive(sba->root);
sba_freeup_channel_resources(sba);
-fail_free_mchans:
- for (i = 0; i < sba->mchans_count; i++)
- mbox_free_channel(sba->mchans[i]);
+fail_free_mchan:
+ mbox_free_channel(sba->mchan);
return ret;
}
static int sba_remove(struct platform_device *pdev)
{
- int i;
struct sba_device *sba = platform_get_drvdata(pdev);
dma_async_device_unregister(&sba->dma_dev);
@@ -1803,8 +1761,7 @@ static int sba_remove(struct platform_device *pdev)
sba_freeup_channel_resources(sba);
- for (i = 0; i < sba->mchans_count; i++)
- mbox_free_channel(sba->mchans[i]);
+ mbox_free_channel(sba->mchan);
return 0;
}
diff --git a/drivers/dma/coh901318.c b/drivers/dma/coh901318.c
index 74794c9859f6..da74fd74636b 100644
--- a/drivers/dma/coh901318.c
+++ b/drivers/dma/coh901318.c
@@ -1319,8 +1319,8 @@ static void coh901318_list_print(struct coh901318_chan *cohc,
int i = 0;
while (l) {
- dev_vdbg(COHC_2_DEV(cohc), "i %d, lli %p, ctrl 0x%x, src 0x%pad"
- ", dst 0x%pad, link 0x%pad virt_link_addr 0x%p\n",
+ dev_vdbg(COHC_2_DEV(cohc), "i %d, lli %p, ctrl 0x%x, src %pad"
+ ", dst %pad, link %pad virt_link_addr 0x%p\n",
i, l, l->control, &l->src_addr, &l->dst_addr,
&l->link_addr, l->virt_link_addr);
i++;
@@ -2231,7 +2231,7 @@ coh901318_prep_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
spin_lock_irqsave(&cohc->lock, flg);
dev_vdbg(COHC_2_DEV(cohc),
- "[%s] channel %d src 0x%pad dest 0x%pad size %zu\n",
+ "[%s] channel %d src %pad dest %pad size %zu\n",
__func__, cohc->id, &src, &dest, size);
if (flags & DMA_PREP_INTERRUPT)
diff --git a/drivers/dma/dma-axi-dmac.c b/drivers/dma/dma-axi-dmac.c
index 7f0b9aa15867..2419fe524daa 100644
--- a/drivers/dma/dma-axi-dmac.c
+++ b/drivers/dma/dma-axi-dmac.c
@@ -72,6 +72,9 @@
#define AXI_DMAC_FLAG_CYCLIC BIT(0)
+/* The maximum ID allocated by the hardware is 31 */
+#define AXI_DMAC_SG_UNUSED 32U
+
struct axi_dmac_sg {
dma_addr_t src_addr;
dma_addr_t dest_addr;
@@ -80,6 +83,7 @@ struct axi_dmac_sg {
unsigned int dest_stride;
unsigned int src_stride;
unsigned int id;
+ bool schedule_when_free;
};
struct axi_dmac_desc {
@@ -200,11 +204,21 @@ static void axi_dmac_start_transfer(struct axi_dmac_chan *chan)
}
sg = &desc->sg[desc->num_submitted];
+ /* Already queued in cyclic mode. Wait for it to finish */
+ if (sg->id != AXI_DMAC_SG_UNUSED) {
+ sg->schedule_when_free = true;
+ return;
+ }
+
desc->num_submitted++;
- if (desc->num_submitted == desc->num_sgs)
- chan->next_desc = NULL;
- else
+ if (desc->num_submitted == desc->num_sgs) {
+ if (desc->cyclic)
+ desc->num_submitted = 0; /* Start again */
+ else
+ chan->next_desc = NULL;
+ } else {
chan->next_desc = desc;
+ }
sg->id = axi_dmac_read(dmac, AXI_DMAC_REG_TRANSFER_ID);
@@ -220,9 +234,11 @@ static void axi_dmac_start_transfer(struct axi_dmac_chan *chan)
/*
* If the hardware supports cyclic transfers and there is no callback to
- * call, enable hw cyclic mode to avoid unnecessary interrupts.
+ * call and only a single segment, enable hw cyclic mode to avoid
+ * unnecessary interrupts.
*/
- if (chan->hw_cyclic && desc->cyclic && !desc->vdesc.tx.callback)
+ if (chan->hw_cyclic && desc->cyclic && !desc->vdesc.tx.callback &&
+ desc->num_sgs == 1)
flags |= AXI_DMAC_FLAG_CYCLIC;
axi_dmac_write(dmac, AXI_DMAC_REG_X_LENGTH, sg->x_len - 1);
@@ -237,37 +253,52 @@ static struct axi_dmac_desc *axi_dmac_active_desc(struct axi_dmac_chan *chan)
struct axi_dmac_desc, vdesc.node);
}
-static void axi_dmac_transfer_done(struct axi_dmac_chan *chan,
+static bool axi_dmac_transfer_done(struct axi_dmac_chan *chan,
unsigned int completed_transfers)
{
struct axi_dmac_desc *active;
struct axi_dmac_sg *sg;
+ bool start_next = false;
active = axi_dmac_active_desc(chan);
if (!active)
- return;
+ return false;
- if (active->cyclic) {
- vchan_cyclic_callback(&active->vdesc);
- } else {
- do {
- sg = &active->sg[active->num_completed];
- if (!(BIT(sg->id) & completed_transfers))
- break;
- active->num_completed++;
- if (active->num_completed == active->num_sgs) {
+ do {
+ sg = &active->sg[active->num_completed];
+ if (sg->id == AXI_DMAC_SG_UNUSED) /* Not yet submitted */
+ break;
+ if (!(BIT(sg->id) & completed_transfers))
+ break;
+ active->num_completed++;
+ sg->id = AXI_DMAC_SG_UNUSED;
+ if (sg->schedule_when_free) {
+ sg->schedule_when_free = false;
+ start_next = true;
+ }
+
+ if (active->cyclic)
+ vchan_cyclic_callback(&active->vdesc);
+
+ if (active->num_completed == active->num_sgs) {
+ if (active->cyclic) {
+ active->num_completed = 0; /* wrap around */
+ } else {
list_del(&active->vdesc.node);
vchan_cookie_complete(&active->vdesc);
active = axi_dmac_active_desc(chan);
}
- } while (active);
- }
+ }
+ } while (active);
+
+ return start_next;
}
static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
{
struct axi_dmac *dmac = devid;
unsigned int pending;
+ bool start_next = false;
pending = axi_dmac_read(dmac, AXI_DMAC_REG_IRQ_PENDING);
if (!pending)
@@ -281,10 +312,10 @@ static irqreturn_t axi_dmac_interrupt_handler(int irq, void *devid)
unsigned int completed;
completed = axi_dmac_read(dmac, AXI_DMAC_REG_TRANSFER_DONE);
- axi_dmac_transfer_done(&dmac->chan, completed);
+ start_next = axi_dmac_transfer_done(&dmac->chan, completed);
}
/* Space has become available in the descriptor queue */
- if (pending & AXI_DMAC_IRQ_SOT)
+ if ((pending & AXI_DMAC_IRQ_SOT) || start_next)
axi_dmac_start_transfer(&dmac->chan);
spin_unlock(&dmac->chan.vchan.lock);
@@ -334,12 +365,16 @@ static void axi_dmac_issue_pending(struct dma_chan *c)
static struct axi_dmac_desc *axi_dmac_alloc_desc(unsigned int num_sgs)
{
struct axi_dmac_desc *desc;
+ unsigned int i;
desc = kzalloc(sizeof(struct axi_dmac_desc) +
sizeof(struct axi_dmac_sg) * num_sgs, GFP_NOWAIT);
if (!desc)
return NULL;
+ for (i = 0; i < num_sgs; i++)
+ desc->sg[i].id = AXI_DMAC_SG_UNUSED;
+
desc->num_sgs = num_sgs;
return desc;
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index 34ff53290b03..47edc7fbf91f 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -702,6 +702,7 @@ static int dmatest_func(void *data)
* free it this time?" dancing. For now, just
* leave it dangling.
*/
+ WARN(1, "dmatest: Kernel stack may be corrupted!!\n");
dmaengine_unmap_put(um);
result("test timed out", total_tests, src_off, dst_off,
len, 0);
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index a7ea20e7b8e9..9364a3ed345a 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -891,6 +891,10 @@ static int edma_slave_config(struct dma_chan *chan,
cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
return -EINVAL;
+ if (cfg->src_maxburst > chan->device->max_burst ||
+ cfg->dst_maxburst > chan->device->max_burst)
+ return -EINVAL;
+
memcpy(&echan->cfg, cfg, sizeof(echan->cfg));
return 0;
@@ -1868,6 +1872,7 @@ static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
s_ddev->dst_addr_widths = EDMA_DMA_BUSWIDTHS;
s_ddev->directions |= (BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV));
s_ddev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+ s_ddev->max_burst = SZ_32K - 1; /* CIDX: 16bit signed */
s_ddev->dev = ecc->dev;
INIT_LIST_HEAD(&s_ddev->channels);
diff --git a/drivers/dma/img-mdc-dma.c b/drivers/dma/img-mdc-dma.c
index 54db1411ce73..0391f930aecc 100644
--- a/drivers/dma/img-mdc-dma.c
+++ b/drivers/dma/img-mdc-dma.c
@@ -23,6 +23,7 @@
#include <linux/of_device.h>
#include <linux/of_dma.h>
#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
@@ -730,14 +731,23 @@ static int mdc_slave_config(struct dma_chan *chan,
return 0;
}
+static int mdc_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct mdc_chan *mchan = to_mdc_chan(chan);
+ struct device *dev = mdma2dev(mchan->mdma);
+
+ return pm_runtime_get_sync(dev);
+}
+
static void mdc_free_chan_resources(struct dma_chan *chan)
{
struct mdc_chan *mchan = to_mdc_chan(chan);
struct mdc_dma *mdma = mchan->mdma;
+ struct device *dev = mdma2dev(mdma);
mdc_terminate_all(chan);
-
mdma->soc->disable_chan(mchan);
+ pm_runtime_put(dev);
}
static irqreturn_t mdc_chan_irq(int irq, void *dev_id)
@@ -854,6 +864,22 @@ static const struct of_device_id mdc_dma_of_match[] = {
};
MODULE_DEVICE_TABLE(of, mdc_dma_of_match);
+static int img_mdc_runtime_suspend(struct device *dev)
+{
+ struct mdc_dma *mdma = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(mdma->clk);
+
+ return 0;
+}
+
+static int img_mdc_runtime_resume(struct device *dev)
+{
+ struct mdc_dma *mdma = dev_get_drvdata(dev);
+
+ return clk_prepare_enable(mdma->clk);
+}
+
static int mdc_dma_probe(struct platform_device *pdev)
{
struct mdc_dma *mdma;
@@ -883,10 +909,6 @@ static int mdc_dma_probe(struct platform_device *pdev)
if (IS_ERR(mdma->clk))
return PTR_ERR(mdma->clk);
- ret = clk_prepare_enable(mdma->clk);
- if (ret)
- return ret;
-
dma_cap_zero(mdma->dma_dev.cap_mask);
dma_cap_set(DMA_SLAVE, mdma->dma_dev.cap_mask);
dma_cap_set(DMA_PRIVATE, mdma->dma_dev.cap_mask);
@@ -919,12 +941,13 @@ static int mdc_dma_probe(struct platform_device *pdev)
"img,max-burst-multiplier",
&mdma->max_burst_mult);
if (ret)
- goto disable_clk;
+ return ret;
mdma->dma_dev.dev = &pdev->dev;
mdma->dma_dev.device_prep_slave_sg = mdc_prep_slave_sg;
mdma->dma_dev.device_prep_dma_cyclic = mdc_prep_dma_cyclic;
mdma->dma_dev.device_prep_dma_memcpy = mdc_prep_dma_memcpy;
+ mdma->dma_dev.device_alloc_chan_resources = mdc_alloc_chan_resources;
mdma->dma_dev.device_free_chan_resources = mdc_free_chan_resources;
mdma->dma_dev.device_tx_status = mdc_tx_status;
mdma->dma_dev.device_issue_pending = mdc_issue_pending;
@@ -945,15 +968,14 @@ static int mdc_dma_probe(struct platform_device *pdev)
mchan->mdma = mdma;
mchan->chan_nr = i;
mchan->irq = platform_get_irq(pdev, i);
- if (mchan->irq < 0) {
- ret = mchan->irq;
- goto disable_clk;
- }
+ if (mchan->irq < 0)
+ return mchan->irq;
+
ret = devm_request_irq(&pdev->dev, mchan->irq, mdc_chan_irq,
IRQ_TYPE_LEVEL_HIGH,
dev_name(&pdev->dev), mchan);
if (ret < 0)
- goto disable_clk;
+ return ret;
mchan->vc.desc_free = mdc_desc_free;
vchan_init(&mchan->vc, &mdma->dma_dev);
@@ -962,14 +984,19 @@ static int mdc_dma_probe(struct platform_device *pdev)
mdma->desc_pool = dmam_pool_create(dev_name(&pdev->dev), &pdev->dev,
sizeof(struct mdc_hw_list_desc),
4, 0);
- if (!mdma->desc_pool) {
- ret = -ENOMEM;
- goto disable_clk;
+ if (!mdma->desc_pool)
+ return -ENOMEM;
+
+ pm_runtime_enable(&pdev->dev);
+ if (!pm_runtime_enabled(&pdev->dev)) {
+ ret = img_mdc_runtime_resume(&pdev->dev);
+ if (ret)
+ return ret;
}
ret = dma_async_device_register(&mdma->dma_dev);
if (ret)
- goto disable_clk;
+ goto suspend;
ret = of_dma_controller_register(pdev->dev.of_node, mdc_of_xlate, mdma);
if (ret)
@@ -982,8 +1009,10 @@ static int mdc_dma_probe(struct platform_device *pdev)
unregister:
dma_async_device_unregister(&mdma->dma_dev);
-disable_clk:
- clk_disable_unprepare(mdma->clk);
+suspend:
+ if (!pm_runtime_enabled(&pdev->dev))
+ img_mdc_runtime_suspend(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
return ret;
}
@@ -1004,14 +1033,47 @@ static int mdc_dma_remove(struct platform_device *pdev)
tasklet_kill(&mchan->vc.task);
}
- clk_disable_unprepare(mdma->clk);
+ pm_runtime_disable(&pdev->dev);
+ if (!pm_runtime_status_suspended(&pdev->dev))
+ img_mdc_runtime_suspend(&pdev->dev);
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int img_mdc_suspend_late(struct device *dev)
+{
+ struct mdc_dma *mdma = dev_get_drvdata(dev);
+ int i;
+
+ /* Check that all channels are idle */
+ for (i = 0; i < mdma->nr_channels; i++) {
+ struct mdc_chan *mchan = &mdma->channels[i];
+
+ if (unlikely(mchan->desc))
+ return -EBUSY;
+ }
+
+ return pm_runtime_force_suspend(dev);
+}
+
+static int img_mdc_resume_early(struct device *dev)
+{
+ return pm_runtime_force_resume(dev);
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static const struct dev_pm_ops img_mdc_pm_ops = {
+ SET_RUNTIME_PM_OPS(img_mdc_runtime_suspend,
+ img_mdc_runtime_resume, NULL)
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(img_mdc_suspend_late,
+ img_mdc_resume_early)
+};
+
static struct platform_driver mdc_dma_driver = {
.driver = {
.name = "img-mdc-dma",
+ .pm = &img_mdc_pm_ops,
.of_match_table = of_match_ptr(mdc_dma_of_match),
},
.probe = mdc_dma_probe,
diff --git a/drivers/dma/imx-dma.c b/drivers/dma/imx-dma.c
index f681df8f0ed3..331f863c605e 100644
--- a/drivers/dma/imx-dma.c
+++ b/drivers/dma/imx-dma.c
@@ -364,9 +364,9 @@ static void imxdma_disable_hw(struct imxdma_channel *imxdmac)
local_irq_restore(flags);
}
-static void imxdma_watchdog(unsigned long data)
+static void imxdma_watchdog(struct timer_list *t)
{
- struct imxdma_channel *imxdmac = (struct imxdma_channel *)data;
+ struct imxdma_channel *imxdmac = from_timer(imxdmac, t, watchdog);
struct imxdma_engine *imxdma = imxdmac->imxdma;
int channel = imxdmac->channel;
@@ -1153,9 +1153,7 @@ static int __init imxdma_probe(struct platform_device *pdev)
}
imxdmac->irq = irq + i;
- init_timer(&imxdmac->watchdog);
- imxdmac->watchdog.function = &imxdma_watchdog;
- imxdmac->watchdog.data = (unsigned long)imxdmac;
+ timer_setup(&imxdmac->watchdog, imxdma_watchdog, 0);
}
imxdmac->imxdma = imxdma;
diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c
index a67ec1bdc4e0..2184881afe76 100644
--- a/drivers/dma/imx-sdma.c
+++ b/drivers/dma/imx-sdma.c
@@ -178,6 +178,14 @@
#define SDMA_WATERMARK_LEVEL_HWE BIT(29)
#define SDMA_WATERMARK_LEVEL_CONT BIT(31)
+#define SDMA_DMA_BUSWIDTHS (BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) | \
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) | \
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES))
+
+#define SDMA_DMA_DIRECTIONS (BIT(DMA_DEV_TO_MEM) | \
+ BIT(DMA_MEM_TO_DEV) | \
+ BIT(DMA_DEV_TO_DEV))
+
/*
* Mode/Count of data node descriptors - IPCv2
*/
@@ -1851,9 +1859,9 @@ static int sdma_probe(struct platform_device *pdev)
sdma->dma_device.device_prep_dma_cyclic = sdma_prep_dma_cyclic;
sdma->dma_device.device_config = sdma_config;
sdma->dma_device.device_terminate_all = sdma_disable_channel_with_delay;
- sdma->dma_device.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- sdma->dma_device.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- sdma->dma_device.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
+ sdma->dma_device.src_addr_widths = SDMA_DMA_BUSWIDTHS;
+ sdma->dma_device.dst_addr_widths = SDMA_DMA_BUSWIDTHS;
+ sdma->dma_device.directions = SDMA_DMA_DIRECTIONS;
sdma->dma_device.residue_granularity = DMA_RESIDUE_GRANULARITY_SEGMENT;
sdma->dma_device.device_issue_pending = sdma_issue_pending;
sdma->dma_device.dev->dma_parms = &sdma->dma_parms;
diff --git a/drivers/dma/ioat/dma.c b/drivers/dma/ioat/dma.c
index f70cc74032ea..58d4ccd33672 100644
--- a/drivers/dma/ioat/dma.c
+++ b/drivers/dma/ioat/dma.c
@@ -474,7 +474,7 @@ int ioat_check_space_lock(struct ioatdma_chan *ioat_chan, int num_descs)
if (time_is_before_jiffies(ioat_chan->timer.expires)
&& timer_pending(&ioat_chan->timer)) {
mod_timer(&ioat_chan->timer, jiffies + COMPLETION_TIMEOUT);
- ioat_timer_event((unsigned long)ioat_chan);
+ ioat_timer_event(&ioat_chan->timer);
}
return -ENOMEM;
@@ -862,9 +862,9 @@ static void check_active(struct ioatdma_chan *ioat_chan)
mod_timer(&ioat_chan->timer, jiffies + IDLE_TIMEOUT);
}
-void ioat_timer_event(unsigned long data)
+void ioat_timer_event(struct timer_list *t)
{
- struct ioatdma_chan *ioat_chan = to_ioat_chan((void *)data);
+ struct ioatdma_chan *ioat_chan = from_timer(ioat_chan, t, timer);
dma_addr_t phys_complete;
u64 status;
diff --git a/drivers/dma/ioat/dma.h b/drivers/dma/ioat/dma.h
index 56200eefcf5e..1ab42ec2b7ff 100644
--- a/drivers/dma/ioat/dma.h
+++ b/drivers/dma/ioat/dma.h
@@ -406,10 +406,9 @@ enum dma_status
ioat_tx_status(struct dma_chan *c, dma_cookie_t cookie,
struct dma_tx_state *txstate);
void ioat_cleanup_event(unsigned long data);
-void ioat_timer_event(unsigned long data);
+void ioat_timer_event(struct timer_list *t);
int ioat_check_space_lock(struct ioatdma_chan *ioat_chan, int num_descs);
void ioat_issue_pending(struct dma_chan *chan);
-void ioat_timer_event(unsigned long data);
/* IOAT Init functions */
bool is_bwd_ioat(struct pci_dev *pdev);
diff --git a/drivers/dma/ioat/init.c b/drivers/dma/ioat/init.c
index 93e006c3441d..2f31d3d0caa6 100644
--- a/drivers/dma/ioat/init.c
+++ b/drivers/dma/ioat/init.c
@@ -760,7 +760,7 @@ ioat_init_channel(struct ioatdma_device *ioat_dma,
dma_cookie_init(&ioat_chan->dma_chan);
list_add_tail(&ioat_chan->dma_chan.device_node, &dma->channels);
ioat_dma->idx[idx] = ioat_chan;
- setup_timer(&ioat_chan->timer, ioat_timer_event, data);
+ timer_setup(&ioat_chan->timer, ioat_timer_event, 0);
tasklet_init(&ioat_chan->cleanup_task, ioat_cleanup_event, data);
}
diff --git a/drivers/dma/nbpfaxi.c b/drivers/dma/nbpfaxi.c
index d3f918a9ee76..50559338239b 100644
--- a/drivers/dma/nbpfaxi.c
+++ b/drivers/dma/nbpfaxi.c
@@ -1286,7 +1286,6 @@ MODULE_DEVICE_TABLE(of, nbpf_match);
static int nbpf_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- const struct of_device_id *of_id = of_match_device(nbpf_match, dev);
struct device_node *np = dev->of_node;
struct nbpf_device *nbpf;
struct dma_device *dma_dev;
@@ -1300,10 +1299,10 @@ static int nbpf_probe(struct platform_device *pdev)
BUILD_BUG_ON(sizeof(struct nbpf_desc_page) > PAGE_SIZE);
/* DT only */
- if (!np || !of_id || !of_id->data)
+ if (!np)
return -ENODEV;
- cfg = of_id->data;
+ cfg = of_device_get_match_data(dev);
num_channels = cfg->num_channels;
nbpf = devm_kzalloc(dev, sizeof(*nbpf) + num_channels *
diff --git a/drivers/dma/omap-dma.c b/drivers/dma/omap-dma.c
index 8c1665c8fe33..f6dd849159d8 100644
--- a/drivers/dma/omap-dma.c
+++ b/drivers/dma/omap-dma.c
@@ -1288,6 +1288,10 @@ static int omap_dma_slave_config(struct dma_chan *chan, struct dma_slave_config
cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
return -EINVAL;
+ if (cfg->src_maxburst > chan->device->max_burst ||
+ cfg->dst_maxburst > chan->device->max_burst)
+ return -EINVAL;
+
memcpy(&c->cfg, cfg, sizeof(c->cfg));
return 0;
@@ -1482,6 +1486,7 @@ static int omap_dma_probe(struct platform_device *pdev)
od->ddev.dst_addr_widths = OMAP_DMA_BUSWIDTHS;
od->ddev.directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
od->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+ od->ddev.max_burst = SZ_16M - 1; /* CCEN: 24bit unsigned */
od->ddev.dev = &pdev->dev;
INIT_LIST_HEAD(&od->ddev.channels);
spin_lock_init(&od->lock);
diff --git a/drivers/dma/pch_dma.c b/drivers/dma/pch_dma.c
index f9028e9d0dfc..afd8f27bda96 100644
--- a/drivers/dma/pch_dma.c
+++ b/drivers/dma/pch_dma.c
@@ -123,7 +123,7 @@ struct pch_dma_chan {
struct pch_dma {
struct dma_device dma;
void __iomem *membase;
- struct pci_pool *pool;
+ struct dma_pool *pool;
struct pch_dma_regs regs;
struct pch_dma_desc_regs ch_regs[MAX_CHAN_NR];
struct pch_dma_chan channels[MAX_CHAN_NR];
@@ -437,7 +437,7 @@ static struct pch_dma_desc *pdc_alloc_desc(struct dma_chan *chan, gfp_t flags)
struct pch_dma *pd = to_pd(chan->device);
dma_addr_t addr;
- desc = pci_pool_zalloc(pd->pool, flags, &addr);
+ desc = dma_pool_zalloc(pd->pool, flags, &addr);
if (desc) {
INIT_LIST_HEAD(&desc->tx_list);
dma_async_tx_descriptor_init(&desc->txd, chan);
@@ -549,7 +549,7 @@ static void pd_free_chan_resources(struct dma_chan *chan)
spin_unlock_irq(&pd_chan->lock);
list_for_each_entry_safe(desc, _d, &tmp_list, desc_node)
- pci_pool_free(pd->pool, desc, desc->txd.phys);
+ dma_pool_free(pd->pool, desc, desc->txd.phys);
pdc_enable_irq(chan, 0);
}
@@ -880,7 +880,7 @@ static int pch_dma_probe(struct pci_dev *pdev,
goto err_iounmap;
}
- pd->pool = pci_pool_create("pch_dma_desc_pool", pdev,
+ pd->pool = dma_pool_create("pch_dma_desc_pool", &pdev->dev,
sizeof(struct pch_dma_desc), 4, 0);
if (!pd->pool) {
dev_err(&pdev->dev, "Failed to alloc DMA descriptors\n");
@@ -931,7 +931,7 @@ static int pch_dma_probe(struct pci_dev *pdev,
return 0;
err_free_pool:
- pci_pool_destroy(pd->pool);
+ dma_pool_destroy(pd->pool);
err_free_irq:
free_irq(pdev->irq, pd);
err_iounmap:
@@ -963,7 +963,7 @@ static void pch_dma_remove(struct pci_dev *pdev)
tasklet_kill(&pd_chan->tasklet);
}
- pci_pool_destroy(pd->pool);
+ dma_pool_destroy(pd->pool);
pci_iounmap(pdev, pd->membase);
pci_release_regions(pdev);
pci_disable_device(pdev);
diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c
index f122c2a7b9f0..d7327fd5f445 100644
--- a/drivers/dma/pl330.c
+++ b/drivers/dma/pl330.c
@@ -2390,7 +2390,8 @@ static inline void _init_desc(struct dma_pl330_desc *desc)
}
/* Returns the number of descriptors added to the DMAC pool */
-static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
+static int add_desc(struct list_head *pool, spinlock_t *lock,
+ gfp_t flg, int count)
{
struct dma_pl330_desc *desc;
unsigned long flags;
@@ -2400,27 +2401,28 @@ static int add_desc(struct pl330_dmac *pl330, gfp_t flg, int count)
if (!desc)
return 0;
- spin_lock_irqsave(&pl330->pool_lock, flags);
+ spin_lock_irqsave(lock, flags);
for (i = 0; i < count; i++) {
_init_desc(&desc[i]);
- list_add_tail(&desc[i].node, &pl330->desc_pool);
+ list_add_tail(&desc[i].node, pool);
}
- spin_unlock_irqrestore(&pl330->pool_lock, flags);
+ spin_unlock_irqrestore(lock, flags);
return count;
}
-static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
+static struct dma_pl330_desc *pluck_desc(struct list_head *pool,
+ spinlock_t *lock)
{
struct dma_pl330_desc *desc = NULL;
unsigned long flags;
- spin_lock_irqsave(&pl330->pool_lock, flags);
+ spin_lock_irqsave(lock, flags);
- if (!list_empty(&pl330->desc_pool)) {
- desc = list_entry(pl330->desc_pool.next,
+ if (!list_empty(pool)) {
+ desc = list_entry(pool->next,
struct dma_pl330_desc, node);
list_del_init(&desc->node);
@@ -2429,7 +2431,7 @@ static struct dma_pl330_desc *pluck_desc(struct pl330_dmac *pl330)
desc->txd.callback = NULL;
}
- spin_unlock_irqrestore(&pl330->pool_lock, flags);
+ spin_unlock_irqrestore(lock, flags);
return desc;
}
@@ -2441,20 +2443,18 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch)
struct dma_pl330_desc *desc;
/* Pluck one desc from the pool of DMAC */
- desc = pluck_desc(pl330);
+ desc = pluck_desc(&pl330->desc_pool, &pl330->pool_lock);
/* If the DMAC pool is empty, alloc new */
if (!desc) {
- if (!add_desc(pl330, GFP_ATOMIC, 1))
- return NULL;
+ DEFINE_SPINLOCK(lock);
+ LIST_HEAD(pool);
- /* Try again */
- desc = pluck_desc(pl330);
- if (!desc) {
- dev_err(pch->dmac->ddma.dev,
- "%s:%d ALERT!\n", __func__, __LINE__);
+ if (!add_desc(&pool, &lock, GFP_ATOMIC, 1))
return NULL;
- }
+
+ desc = pluck_desc(&pool, &lock);
+ WARN_ON(!desc || !list_empty(&pool));
}
/* Initialize the descriptor */
@@ -2868,7 +2868,8 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
spin_lock_init(&pl330->pool_lock);
/* Create a descriptor pool of default size */
- if (!add_desc(pl330, GFP_KERNEL, NR_DEFAULT_DESC))
+ if (!add_desc(&pl330->desc_pool, &pl330->pool_lock,
+ GFP_KERNEL, NR_DEFAULT_DESC))
dev_warn(&adev->dev, "unable to allocate desc\n");
INIT_LIST_HEAD(&pd->channels);
diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 6d89fb6a6a92..d076940e0c69 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -46,6 +46,7 @@
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_dma.h>
+#include <linux/circ_buf.h>
#include <linux/clk.h>
#include <linux/dmaengine.h>
#include <linux/pm_runtime.h>
@@ -78,6 +79,8 @@ struct bam_async_desc {
struct bam_desc_hw *curr_desc;
+ /* list node for the desc in the bam_chan list of descriptors */
+ struct list_head desc_node;
enum dma_transfer_direction dir;
size_t length;
struct bam_desc_hw desc[0];
@@ -347,6 +350,8 @@ static const struct reg_offset_data bam_v1_7_reg_info[] = {
#define BAM_DESC_FIFO_SIZE SZ_32K
#define MAX_DESCRIPTORS (BAM_DESC_FIFO_SIZE / sizeof(struct bam_desc_hw) - 1)
#define BAM_FIFO_SIZE (SZ_32K - 8)
+#define IS_BUSY(chan) (CIRC_SPACE(bchan->tail, bchan->head,\
+ MAX_DESCRIPTORS + 1) == 0)
struct bam_chan {
struct virt_dma_chan vc;
@@ -356,8 +361,6 @@ struct bam_chan {
/* configuration from device tree */
u32 id;
- struct bam_async_desc *curr_txd; /* current running dma */
-
/* runtime configuration */
struct dma_slave_config slave;
@@ -372,6 +375,8 @@ struct bam_chan {
unsigned int initialized; /* is the channel hw initialized? */
unsigned int paused; /* is the channel paused? */
unsigned int reconfigure; /* new slave config? */
+ /* list of descriptors currently processed */
+ struct list_head desc_list;
struct list_head node;
};
@@ -539,7 +544,7 @@ static void bam_free_chan(struct dma_chan *chan)
vchan_free_chan_resources(to_virt_chan(chan));
- if (bchan->curr_txd) {
+ if (!list_empty(&bchan->desc_list)) {
dev_err(bchan->bdev->dev, "Cannot free busy channel\n");
goto err;
}
@@ -632,8 +637,6 @@ static struct dma_async_tx_descriptor *bam_prep_slave_sg(struct dma_chan *chan,
if (flags & DMA_PREP_INTERRUPT)
async_desc->flags |= DESC_FLAG_EOT;
- else
- async_desc->flags |= DESC_FLAG_INT;
async_desc->num_desc = num_alloc;
async_desc->curr_desc = async_desc->desc;
@@ -684,14 +687,16 @@ err_out:
static int bam_dma_terminate_all(struct dma_chan *chan)
{
struct bam_chan *bchan = to_bam_chan(chan);
+ struct bam_async_desc *async_desc, *tmp;
unsigned long flag;
LIST_HEAD(head);
/* remove all transactions, including active transaction */
spin_lock_irqsave(&bchan->vc.lock, flag);
- if (bchan->curr_txd) {
- list_add(&bchan->curr_txd->vd.node, &bchan->vc.desc_issued);
- bchan->curr_txd = NULL;
+ list_for_each_entry_safe(async_desc, tmp,
+ &bchan->desc_list, desc_node) {
+ list_add(&async_desc->vd.node, &bchan->vc.desc_issued);
+ list_del(&async_desc->desc_node);
}
vchan_get_all_descriptors(&bchan->vc, &head);
@@ -763,9 +768,9 @@ static int bam_resume(struct dma_chan *chan)
*/
static u32 process_channel_irqs(struct bam_device *bdev)
{
- u32 i, srcs, pipe_stts;
+ u32 i, srcs, pipe_stts, offset, avail;
unsigned long flags;
- struct bam_async_desc *async_desc;
+ struct bam_async_desc *async_desc, *tmp;
srcs = readl_relaxed(bam_addr(bdev, 0, BAM_IRQ_SRCS_EE));
@@ -785,27 +790,40 @@ static u32 process_channel_irqs(struct bam_device *bdev)
writel_relaxed(pipe_stts, bam_addr(bdev, i, BAM_P_IRQ_CLR));
spin_lock_irqsave(&bchan->vc.lock, flags);
- async_desc = bchan->curr_txd;
- if (async_desc) {
- async_desc->num_desc -= async_desc->xfer_len;
- async_desc->curr_desc += async_desc->xfer_len;
- bchan->curr_txd = NULL;
+ offset = readl_relaxed(bam_addr(bdev, i, BAM_P_SW_OFSTS)) &
+ P_SW_OFSTS_MASK;
+ offset /= sizeof(struct bam_desc_hw);
+
+ /* Number of bytes available to read */
+ avail = CIRC_CNT(offset, bchan->head, MAX_DESCRIPTORS + 1);
+
+ list_for_each_entry_safe(async_desc, tmp,
+ &bchan->desc_list, desc_node) {
+ /* Not enough data to read */
+ if (avail < async_desc->xfer_len)
+ break;
/* manage FIFO */
bchan->head += async_desc->xfer_len;
bchan->head %= MAX_DESCRIPTORS;
+ async_desc->num_desc -= async_desc->xfer_len;
+ async_desc->curr_desc += async_desc->xfer_len;
+ avail -= async_desc->xfer_len;
+
/*
- * if complete, process cookie. Otherwise
+ * if complete, process cookie. Otherwise
* push back to front of desc_issued so that
* it gets restarted by the tasklet
*/
- if (!async_desc->num_desc)
+ if (!async_desc->num_desc) {
vchan_cookie_complete(&async_desc->vd);
- else
+ } else {
list_add(&async_desc->vd.node,
- &bchan->vc.desc_issued);
+ &bchan->vc.desc_issued);
+ }
+ list_del(&async_desc->desc_node);
}
spin_unlock_irqrestore(&bchan->vc.lock, flags);
@@ -867,6 +885,7 @@ static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
struct dma_tx_state *txstate)
{
struct bam_chan *bchan = to_bam_chan(chan);
+ struct bam_async_desc *async_desc;
struct virt_dma_desc *vd;
int ret;
size_t residue = 0;
@@ -882,11 +901,17 @@ static enum dma_status bam_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
spin_lock_irqsave(&bchan->vc.lock, flags);
vd = vchan_find_desc(&bchan->vc, cookie);
- if (vd)
+ if (vd) {
residue = container_of(vd, struct bam_async_desc, vd)->length;
- else if (bchan->curr_txd && bchan->curr_txd->vd.tx.cookie == cookie)
- for (i = 0; i < bchan->curr_txd->num_desc; i++)
- residue += bchan->curr_txd->curr_desc[i].size;
+ } else {
+ list_for_each_entry(async_desc, &bchan->desc_list, desc_node) {
+ if (async_desc->vd.tx.cookie != cookie)
+ continue;
+
+ for (i = 0; i < async_desc->num_desc; i++)
+ residue += async_desc->curr_desc[i].size;
+ }
+ }
spin_unlock_irqrestore(&bchan->vc.lock, flags);
@@ -927,63 +952,86 @@ static void bam_start_dma(struct bam_chan *bchan)
{
struct virt_dma_desc *vd = vchan_next_desc(&bchan->vc);
struct bam_device *bdev = bchan->bdev;
- struct bam_async_desc *async_desc;
+ struct bam_async_desc *async_desc = NULL;
struct bam_desc_hw *desc;
struct bam_desc_hw *fifo = PTR_ALIGN(bchan->fifo_virt,
sizeof(struct bam_desc_hw));
int ret;
+ unsigned int avail;
+ struct dmaengine_desc_callback cb;
lockdep_assert_held(&bchan->vc.lock);
if (!vd)
return;
- list_del(&vd->node);
-
- async_desc = container_of(vd, struct bam_async_desc, vd);
- bchan->curr_txd = async_desc;
-
ret = pm_runtime_get_sync(bdev->dev);
if (ret < 0)
return;
- /* on first use, initialize the channel hardware */
- if (!bchan->initialized)
- bam_chan_init_hw(bchan, async_desc->dir);
+ while (vd && !IS_BUSY(bchan)) {
+ list_del(&vd->node);
- /* apply new slave config changes, if necessary */
- if (bchan->reconfigure)
- bam_apply_new_config(bchan, async_desc->dir);
+ async_desc = container_of(vd, struct bam_async_desc, vd);
- desc = bchan->curr_txd->curr_desc;
+ /* on first use, initialize the channel hardware */
+ if (!bchan->initialized)
+ bam_chan_init_hw(bchan, async_desc->dir);
- if (async_desc->num_desc > MAX_DESCRIPTORS)
- async_desc->xfer_len = MAX_DESCRIPTORS;
- else
- async_desc->xfer_len = async_desc->num_desc;
+ /* apply new slave config changes, if necessary */
+ if (bchan->reconfigure)
+ bam_apply_new_config(bchan, async_desc->dir);
- /* set any special flags on the last descriptor */
- if (async_desc->num_desc == async_desc->xfer_len)
- desc[async_desc->xfer_len - 1].flags |=
- cpu_to_le16(async_desc->flags);
- else
- desc[async_desc->xfer_len - 1].flags |=
- cpu_to_le16(DESC_FLAG_INT);
+ desc = async_desc->curr_desc;
+ avail = CIRC_SPACE(bchan->tail, bchan->head,
+ MAX_DESCRIPTORS + 1);
+
+ if (async_desc->num_desc > avail)
+ async_desc->xfer_len = avail;
+ else
+ async_desc->xfer_len = async_desc->num_desc;
+
+ /* set any special flags on the last descriptor */
+ if (async_desc->num_desc == async_desc->xfer_len)
+ desc[async_desc->xfer_len - 1].flags |=
+ cpu_to_le16(async_desc->flags);
- if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {
- u32 partial = MAX_DESCRIPTORS - bchan->tail;
+ vd = vchan_next_desc(&bchan->vc);
- memcpy(&fifo[bchan->tail], desc,
- partial * sizeof(struct bam_desc_hw));
- memcpy(fifo, &desc[partial], (async_desc->xfer_len - partial) *
+ dmaengine_desc_get_callback(&async_desc->vd.tx, &cb);
+
+ /*
+ * An interrupt is generated at this desc, if
+ * - FIFO is FULL.
+ * - No more descriptors to add.
+ * - If a callback completion was requested for this DESC,
+ * In this case, BAM will deliver the completion callback
+ * for this desc and continue processing the next desc.
+ */
+ if (((avail <= async_desc->xfer_len) || !vd ||
+ dmaengine_desc_callback_valid(&cb)) &&
+ !(async_desc->flags & DESC_FLAG_EOT))
+ desc[async_desc->xfer_len - 1].flags |=
+ cpu_to_le16(DESC_FLAG_INT);
+
+ if (bchan->tail + async_desc->xfer_len > MAX_DESCRIPTORS) {
+ u32 partial = MAX_DESCRIPTORS - bchan->tail;
+
+ memcpy(&fifo[bchan->tail], desc,
+ partial * sizeof(struct bam_desc_hw));
+ memcpy(fifo, &desc[partial],
+ (async_desc->xfer_len - partial) *
sizeof(struct bam_desc_hw));
- } else {
- memcpy(&fifo[bchan->tail], desc,
- async_desc->xfer_len * sizeof(struct bam_desc_hw));
- }
+ } else {
+ memcpy(&fifo[bchan->tail], desc,
+ async_desc->xfer_len *
+ sizeof(struct bam_desc_hw));
+ }
- bchan->tail += async_desc->xfer_len;
- bchan->tail %= MAX_DESCRIPTORS;
+ bchan->tail += async_desc->xfer_len;
+ bchan->tail %= MAX_DESCRIPTORS;
+ list_add_tail(&async_desc->desc_node, &bchan->desc_list);
+ }
/* ensure descriptor writes and dma start not reordered */
wmb();
@@ -1012,7 +1060,7 @@ static void dma_tasklet(unsigned long data)
bchan = &bdev->channels[i];
spin_lock_irqsave(&bchan->vc.lock, flags);
- if (!list_empty(&bchan->vc.desc_issued) && !bchan->curr_txd)
+ if (!list_empty(&bchan->vc.desc_issued) && !IS_BUSY(bchan))
bam_start_dma(bchan);
spin_unlock_irqrestore(&bchan->vc.lock, flags);
}
@@ -1033,7 +1081,7 @@ static void bam_issue_pending(struct dma_chan *chan)
spin_lock_irqsave(&bchan->vc.lock, flags);
/* if work pending and idle, start a transaction */
- if (vchan_issue_pending(&bchan->vc) && !bchan->curr_txd)
+ if (vchan_issue_pending(&bchan->vc) && !IS_BUSY(bchan))
bam_start_dma(bchan);
spin_unlock_irqrestore(&bchan->vc.lock, flags);
@@ -1133,6 +1181,7 @@ static void bam_channel_init(struct bam_device *bdev, struct bam_chan *bchan,
vchan_init(&bchan->vc, &bdev->common);
bchan->vc.desc_free = bam_dma_free_desc;
+ INIT_LIST_HEAD(&bchan->desc_list);
}
static const struct of_device_id bam_of_match[] = {
diff --git a/drivers/dma/sa11x0-dma.c b/drivers/dma/sa11x0-dma.c
index 1adeb3265085..c7a89c22890e 100644
--- a/drivers/dma/sa11x0-dma.c
+++ b/drivers/dma/sa11x0-dma.c
@@ -823,6 +823,13 @@ static const struct sa11x0_dma_channel_desc chan_desc[] = {
CD(Ser4SSPRc, DDAR_RW),
};
+static const struct dma_slave_map sa11x0_dma_map[] = {
+ { "sa11x0-ir", "tx", "Ser2ICPTr" },
+ { "sa11x0-ir", "rx", "Ser2ICPRc" },
+ { "sa11x0-ssp", "tx", "Ser4SSPTr" },
+ { "sa11x0-ssp", "rx", "Ser4SSPRc" },
+};
+
static int sa11x0_dma_init_dmadev(struct dma_device *dmadev,
struct device *dev)
{
@@ -909,6 +916,10 @@ static int sa11x0_dma_probe(struct platform_device *pdev)
spin_lock_init(&d->lock);
INIT_LIST_HEAD(&d->chan_pending);
+ d->slave.filter.fn = sa11x0_dma_filter_fn;
+ d->slave.filter.mapcnt = ARRAY_SIZE(sa11x0_dma_map);
+ d->slave.filter.map = sa11x0_dma_map;
+
d->base = ioremap(res->start, resource_size(res));
if (!d->base) {
ret = -ENOMEM;
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
new file mode 100644
index 000000000000..b652071a2096
--- /dev/null
+++ b/drivers/dma/sprd-dma.c
@@ -0,0 +1,988 @@
+/*
+ * Copyright (C) 2017 Spreadtrum Communications Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/of_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#include "virt-dma.h"
+
+#define SPRD_DMA_CHN_REG_OFFSET 0x1000
+#define SPRD_DMA_CHN_REG_LENGTH 0x40
+#define SPRD_DMA_MEMCPY_MIN_SIZE 64
+
+/* DMA global registers definition */
+#define SPRD_DMA_GLB_PAUSE 0x0
+#define SPRD_DMA_GLB_FRAG_WAIT 0x4
+#define SPRD_DMA_GLB_REQ_PEND0_EN 0x8
+#define SPRD_DMA_GLB_REQ_PEND1_EN 0xc
+#define SPRD_DMA_GLB_INT_RAW_STS 0x10
+#define SPRD_DMA_GLB_INT_MSK_STS 0x14
+#define SPRD_DMA_GLB_REQ_STS 0x18
+#define SPRD_DMA_GLB_CHN_EN_STS 0x1c
+#define SPRD_DMA_GLB_DEBUG_STS 0x20
+#define SPRD_DMA_GLB_ARB_SEL_STS 0x24
+#define SPRD_DMA_GLB_REQ_UID(uid) (0x4 * ((uid) - 1))
+#define SPRD_DMA_GLB_REQ_UID_OFFSET 0x2000
+
+/* DMA channel registers definition */
+#define SPRD_DMA_CHN_PAUSE 0x0
+#define SPRD_DMA_CHN_REQ 0x4
+#define SPRD_DMA_CHN_CFG 0x8
+#define SPRD_DMA_CHN_INTC 0xc
+#define SPRD_DMA_CHN_SRC_ADDR 0x10
+#define SPRD_DMA_CHN_DES_ADDR 0x14
+#define SPRD_DMA_CHN_FRG_LEN 0x18
+#define SPRD_DMA_CHN_BLK_LEN 0x1c
+#define SPRD_DMA_CHN_TRSC_LEN 0x20
+#define SPRD_DMA_CHN_TRSF_STEP 0x24
+#define SPRD_DMA_CHN_WARP_PTR 0x28
+#define SPRD_DMA_CHN_WARP_TO 0x2c
+#define SPRD_DMA_CHN_LLIST_PTR 0x30
+#define SPRD_DMA_CHN_FRAG_STEP 0x34
+#define SPRD_DMA_CHN_SRC_BLK_STEP 0x38
+#define SPRD_DMA_CHN_DES_BLK_STEP 0x3c
+
+/* SPRD_DMA_CHN_INTC register definition */
+#define SPRD_DMA_INT_MASK GENMASK(4, 0)
+#define SPRD_DMA_INT_CLR_OFFSET 24
+#define SPRD_DMA_FRAG_INT_EN BIT(0)
+#define SPRD_DMA_BLK_INT_EN BIT(1)
+#define SPRD_DMA_TRANS_INT_EN BIT(2)
+#define SPRD_DMA_LIST_INT_EN BIT(3)
+#define SPRD_DMA_CFG_ERR_INT_EN BIT(4)
+
+/* SPRD_DMA_CHN_CFG register definition */
+#define SPRD_DMA_CHN_EN BIT(0)
+#define SPRD_DMA_WAIT_BDONE_OFFSET 24
+#define SPRD_DMA_DONOT_WAIT_BDONE 1
+
+/* SPRD_DMA_CHN_REQ register definition */
+#define SPRD_DMA_REQ_EN BIT(0)
+
+/* SPRD_DMA_CHN_PAUSE register definition */
+#define SPRD_DMA_PAUSE_EN BIT(0)
+#define SPRD_DMA_PAUSE_STS BIT(2)
+#define SPRD_DMA_PAUSE_CNT 0x2000
+
+/* DMA_CHN_WARP_* register definition */
+#define SPRD_DMA_HIGH_ADDR_MASK GENMASK(31, 28)
+#define SPRD_DMA_LOW_ADDR_MASK GENMASK(31, 0)
+#define SPRD_DMA_HIGH_ADDR_OFFSET 4
+
+/* SPRD_DMA_CHN_INTC register definition */
+#define SPRD_DMA_FRAG_INT_STS BIT(16)
+#define SPRD_DMA_BLK_INT_STS BIT(17)
+#define SPRD_DMA_TRSC_INT_STS BIT(18)
+#define SPRD_DMA_LIST_INT_STS BIT(19)
+#define SPRD_DMA_CFGERR_INT_STS BIT(20)
+#define SPRD_DMA_CHN_INT_STS \
+ (SPRD_DMA_FRAG_INT_STS | SPRD_DMA_BLK_INT_STS | \
+ SPRD_DMA_TRSC_INT_STS | SPRD_DMA_LIST_INT_STS | \
+ SPRD_DMA_CFGERR_INT_STS)
+
+/* SPRD_DMA_CHN_FRG_LEN register definition */
+#define SPRD_DMA_SRC_DATAWIDTH_OFFSET 30
+#define SPRD_DMA_DES_DATAWIDTH_OFFSET 28
+#define SPRD_DMA_SWT_MODE_OFFSET 26
+#define SPRD_DMA_REQ_MODE_OFFSET 24
+#define SPRD_DMA_REQ_MODE_MASK GENMASK(1, 0)
+#define SPRD_DMA_FIX_SEL_OFFSET 21
+#define SPRD_DMA_FIX_EN_OFFSET 20
+#define SPRD_DMA_LLIST_END_OFFSET 19
+#define SPRD_DMA_FRG_LEN_MASK GENMASK(16, 0)
+
+/* SPRD_DMA_CHN_BLK_LEN register definition */
+#define SPRD_DMA_BLK_LEN_MASK GENMASK(16, 0)
+
+/* SPRD_DMA_CHN_TRSC_LEN register definition */
+#define SPRD_DMA_TRSC_LEN_MASK GENMASK(27, 0)
+
+/* SPRD_DMA_CHN_TRSF_STEP register definition */
+#define SPRD_DMA_DEST_TRSF_STEP_OFFSET 16
+#define SPRD_DMA_SRC_TRSF_STEP_OFFSET 0
+#define SPRD_DMA_TRSF_STEP_MASK GENMASK(15, 0)
+
+#define SPRD_DMA_SOFTWARE_UID 0
+
+/*
+ * enum sprd_dma_req_mode: define the DMA request mode
+ * @SPRD_DMA_FRAG_REQ: fragment request mode
+ * @SPRD_DMA_BLK_REQ: block request mode
+ * @SPRD_DMA_TRANS_REQ: transaction request mode
+ * @SPRD_DMA_LIST_REQ: link-list request mode
+ *
+ * We have 4 types request mode: fragment mode, block mode, transaction mode
+ * and linklist mode. One transaction can contain several blocks, one block can
+ * contain several fragments. Link-list mode means we can save several DMA
+ * configuration into one reserved memory, then DMA can fetch each DMA
+ * configuration automatically to start transfer.
+ */
+enum sprd_dma_req_mode {
+ SPRD_DMA_FRAG_REQ,
+ SPRD_DMA_BLK_REQ,
+ SPRD_DMA_TRANS_REQ,
+ SPRD_DMA_LIST_REQ,
+};
+
+/*
+ * enum sprd_dma_int_type: define the DMA interrupt type
+ * @SPRD_DMA_NO_INT: do not need generate DMA interrupts.
+ * @SPRD_DMA_FRAG_INT: fragment done interrupt when one fragment request
+ * is done.
+ * @SPRD_DMA_BLK_INT: block done interrupt when one block request is done.
+ * @SPRD_DMA_BLK_FRAG_INT: block and fragment interrupt when one fragment
+ * or one block request is done.
+ * @SPRD_DMA_TRANS_INT: tansaction done interrupt when one transaction
+ * request is done.
+ * @SPRD_DMA_TRANS_FRAG_INT: transaction and fragment interrupt when one
+ * transaction request or fragment request is done.
+ * @SPRD_DMA_TRANS_BLK_INT: transaction and block interrupt when one
+ * transaction request or block request is done.
+ * @SPRD_DMA_LIST_INT: link-list done interrupt when one link-list request
+ * is done.
+ * @SPRD_DMA_CFGERR_INT: configure error interrupt when configuration is
+ * incorrect.
+ */
+enum sprd_dma_int_type {
+ SPRD_DMA_NO_INT,
+ SPRD_DMA_FRAG_INT,
+ SPRD_DMA_BLK_INT,
+ SPRD_DMA_BLK_FRAG_INT,
+ SPRD_DMA_TRANS_INT,
+ SPRD_DMA_TRANS_FRAG_INT,
+ SPRD_DMA_TRANS_BLK_INT,
+ SPRD_DMA_LIST_INT,
+ SPRD_DMA_CFGERR_INT,
+};
+
+/* dma channel hardware configuration */
+struct sprd_dma_chn_hw {
+ u32 pause;
+ u32 req;
+ u32 cfg;
+ u32 intc;
+ u32 src_addr;
+ u32 des_addr;
+ u32 frg_len;
+ u32 blk_len;
+ u32 trsc_len;
+ u32 trsf_step;
+ u32 wrap_ptr;
+ u32 wrap_to;
+ u32 llist_ptr;
+ u32 frg_step;
+ u32 src_blk_step;
+ u32 des_blk_step;
+};
+
+/* dma request description */
+struct sprd_dma_desc {
+ struct virt_dma_desc vd;
+ struct sprd_dma_chn_hw chn_hw;
+};
+
+/* dma channel description */
+struct sprd_dma_chn {
+ struct virt_dma_chan vc;
+ void __iomem *chn_base;
+ u32 chn_num;
+ u32 dev_id;
+ struct sprd_dma_desc *cur_desc;
+};
+
+/* SPRD dma device */
+struct sprd_dma_dev {
+ struct dma_device dma_dev;
+ void __iomem *glb_base;
+ struct clk *clk;
+ struct clk *ashb_clk;
+ int irq;
+ u32 total_chns;
+ struct sprd_dma_chn channels[0];
+};
+
+static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param);
+static struct of_dma_filter_info sprd_dma_info = {
+ .filter_fn = sprd_dma_filter_fn,
+};
+
+static inline struct sprd_dma_chn *to_sprd_dma_chan(struct dma_chan *c)
+{
+ return container_of(c, struct sprd_dma_chn, vc.chan);
+}
+
+static inline struct sprd_dma_dev *to_sprd_dma_dev(struct dma_chan *c)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(c);
+
+ return container_of(schan, struct sprd_dma_dev, channels[c->chan_id]);
+}
+
+static inline struct sprd_dma_desc *to_sprd_dma_desc(struct virt_dma_desc *vd)
+{
+ return container_of(vd, struct sprd_dma_desc, vd);
+}
+
+static void sprd_dma_chn_update(struct sprd_dma_chn *schan, u32 reg,
+ u32 mask, u32 val)
+{
+ u32 orig = readl(schan->chn_base + reg);
+ u32 tmp;
+
+ tmp = (orig & ~mask) | val;
+ writel(tmp, schan->chn_base + reg);
+}
+
+static int sprd_dma_enable(struct sprd_dma_dev *sdev)
+{
+ int ret;
+
+ ret = clk_prepare_enable(sdev->clk);
+ if (ret)
+ return ret;
+
+ /*
+ * The ashb_clk is optional and only for AGCP DMA controller, so we
+ * need add one condition to check if the ashb_clk need enable.
+ */
+ if (!IS_ERR(sdev->ashb_clk))
+ ret = clk_prepare_enable(sdev->ashb_clk);
+
+ return ret;
+}
+
+static void sprd_dma_disable(struct sprd_dma_dev *sdev)
+{
+ clk_disable_unprepare(sdev->clk);
+
+ /*
+ * Need to check if we need disable the optional ashb_clk for AGCP DMA.
+ */
+ if (!IS_ERR(sdev->ashb_clk))
+ clk_disable_unprepare(sdev->ashb_clk);
+}
+
+static void sprd_dma_set_uid(struct sprd_dma_chn *schan)
+{
+ struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+ u32 dev_id = schan->dev_id;
+
+ if (dev_id != SPRD_DMA_SOFTWARE_UID) {
+ u32 uid_offset = SPRD_DMA_GLB_REQ_UID_OFFSET +
+ SPRD_DMA_GLB_REQ_UID(dev_id);
+
+ writel(schan->chn_num + 1, sdev->glb_base + uid_offset);
+ }
+}
+
+static void sprd_dma_unset_uid(struct sprd_dma_chn *schan)
+{
+ struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+ u32 dev_id = schan->dev_id;
+
+ if (dev_id != SPRD_DMA_SOFTWARE_UID) {
+ u32 uid_offset = SPRD_DMA_GLB_REQ_UID_OFFSET +
+ SPRD_DMA_GLB_REQ_UID(dev_id);
+
+ writel(0, sdev->glb_base + uid_offset);
+ }
+}
+
+static void sprd_dma_clear_int(struct sprd_dma_chn *schan)
+{
+ sprd_dma_chn_update(schan, SPRD_DMA_CHN_INTC,
+ SPRD_DMA_INT_MASK << SPRD_DMA_INT_CLR_OFFSET,
+ SPRD_DMA_INT_MASK << SPRD_DMA_INT_CLR_OFFSET);
+}
+
+static void sprd_dma_enable_chn(struct sprd_dma_chn *schan)
+{
+ sprd_dma_chn_update(schan, SPRD_DMA_CHN_CFG, SPRD_DMA_CHN_EN,
+ SPRD_DMA_CHN_EN);
+}
+
+static void sprd_dma_disable_chn(struct sprd_dma_chn *schan)
+{
+ sprd_dma_chn_update(schan, SPRD_DMA_CHN_CFG, SPRD_DMA_CHN_EN, 0);
+}
+
+static void sprd_dma_soft_request(struct sprd_dma_chn *schan)
+{
+ sprd_dma_chn_update(schan, SPRD_DMA_CHN_REQ, SPRD_DMA_REQ_EN,
+ SPRD_DMA_REQ_EN);
+}
+
+static void sprd_dma_pause_resume(struct sprd_dma_chn *schan, bool enable)
+{
+ struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+ u32 pause, timeout = SPRD_DMA_PAUSE_CNT;
+
+ if (enable) {
+ sprd_dma_chn_update(schan, SPRD_DMA_CHN_PAUSE,
+ SPRD_DMA_PAUSE_EN, SPRD_DMA_PAUSE_EN);
+
+ do {
+ pause = readl(schan->chn_base + SPRD_DMA_CHN_PAUSE);
+ if (pause & SPRD_DMA_PAUSE_STS)
+ break;
+
+ cpu_relax();
+ } while (--timeout > 0);
+
+ if (!timeout)
+ dev_warn(sdev->dma_dev.dev,
+ "pause dma controller timeout\n");
+ } else {
+ sprd_dma_chn_update(schan, SPRD_DMA_CHN_PAUSE,
+ SPRD_DMA_PAUSE_EN, 0);
+ }
+}
+
+static void sprd_dma_stop_and_disable(struct sprd_dma_chn *schan)
+{
+ u32 cfg = readl(schan->chn_base + SPRD_DMA_CHN_CFG);
+
+ if (!(cfg & SPRD_DMA_CHN_EN))
+ return;
+
+ sprd_dma_pause_resume(schan, true);
+ sprd_dma_disable_chn(schan);
+}
+
+static unsigned long sprd_dma_get_dst_addr(struct sprd_dma_chn *schan)
+{
+ unsigned long addr, addr_high;
+
+ addr = readl(schan->chn_base + SPRD_DMA_CHN_DES_ADDR);
+ addr_high = readl(schan->chn_base + SPRD_DMA_CHN_WARP_TO) &
+ SPRD_DMA_HIGH_ADDR_MASK;
+
+ return addr | (addr_high << SPRD_DMA_HIGH_ADDR_OFFSET);
+}
+
+static enum sprd_dma_int_type sprd_dma_get_int_type(struct sprd_dma_chn *schan)
+{
+ struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+ u32 intc_sts = readl(schan->chn_base + SPRD_DMA_CHN_INTC) &
+ SPRD_DMA_CHN_INT_STS;
+
+ switch (intc_sts) {
+ case SPRD_DMA_CFGERR_INT_STS:
+ return SPRD_DMA_CFGERR_INT;
+
+ case SPRD_DMA_LIST_INT_STS:
+ return SPRD_DMA_LIST_INT;
+
+ case SPRD_DMA_TRSC_INT_STS:
+ return SPRD_DMA_TRANS_INT;
+
+ case SPRD_DMA_BLK_INT_STS:
+ return SPRD_DMA_BLK_INT;
+
+ case SPRD_DMA_FRAG_INT_STS:
+ return SPRD_DMA_FRAG_INT;
+
+ default:
+ dev_warn(sdev->dma_dev.dev, "incorrect dma interrupt type\n");
+ return SPRD_DMA_NO_INT;
+ }
+}
+
+static enum sprd_dma_req_mode sprd_dma_get_req_type(struct sprd_dma_chn *schan)
+{
+ u32 frag_reg = readl(schan->chn_base + SPRD_DMA_CHN_FRG_LEN);
+
+ return (frag_reg >> SPRD_DMA_REQ_MODE_OFFSET) & SPRD_DMA_REQ_MODE_MASK;
+}
+
+static void sprd_dma_set_chn_config(struct sprd_dma_chn *schan,
+ struct sprd_dma_desc *sdesc)
+{
+ struct sprd_dma_chn_hw *cfg = &sdesc->chn_hw;
+
+ writel(cfg->pause, schan->chn_base + SPRD_DMA_CHN_PAUSE);
+ writel(cfg->cfg, schan->chn_base + SPRD_DMA_CHN_CFG);
+ writel(cfg->intc, schan->chn_base + SPRD_DMA_CHN_INTC);
+ writel(cfg->src_addr, schan->chn_base + SPRD_DMA_CHN_SRC_ADDR);
+ writel(cfg->des_addr, schan->chn_base + SPRD_DMA_CHN_DES_ADDR);
+ writel(cfg->frg_len, schan->chn_base + SPRD_DMA_CHN_FRG_LEN);
+ writel(cfg->blk_len, schan->chn_base + SPRD_DMA_CHN_BLK_LEN);
+ writel(cfg->trsc_len, schan->chn_base + SPRD_DMA_CHN_TRSC_LEN);
+ writel(cfg->trsf_step, schan->chn_base + SPRD_DMA_CHN_TRSF_STEP);
+ writel(cfg->wrap_ptr, schan->chn_base + SPRD_DMA_CHN_WARP_PTR);
+ writel(cfg->wrap_to, schan->chn_base + SPRD_DMA_CHN_WARP_TO);
+ writel(cfg->llist_ptr, schan->chn_base + SPRD_DMA_CHN_LLIST_PTR);
+ writel(cfg->frg_step, schan->chn_base + SPRD_DMA_CHN_FRAG_STEP);
+ writel(cfg->src_blk_step, schan->chn_base + SPRD_DMA_CHN_SRC_BLK_STEP);
+ writel(cfg->des_blk_step, schan->chn_base + SPRD_DMA_CHN_DES_BLK_STEP);
+ writel(cfg->req, schan->chn_base + SPRD_DMA_CHN_REQ);
+}
+
+static void sprd_dma_start(struct sprd_dma_chn *schan)
+{
+ struct virt_dma_desc *vd = vchan_next_desc(&schan->vc);
+
+ if (!vd)
+ return;
+
+ list_del(&vd->node);
+ schan->cur_desc = to_sprd_dma_desc(vd);
+
+ /*
+ * Copy the DMA configuration from DMA descriptor to this hardware
+ * channel.
+ */
+ sprd_dma_set_chn_config(schan, schan->cur_desc);
+ sprd_dma_set_uid(schan);
+ sprd_dma_enable_chn(schan);
+
+ if (schan->dev_id == SPRD_DMA_SOFTWARE_UID)
+ sprd_dma_soft_request(schan);
+}
+
+static void sprd_dma_stop(struct sprd_dma_chn *schan)
+{
+ sprd_dma_stop_and_disable(schan);
+ sprd_dma_unset_uid(schan);
+ sprd_dma_clear_int(schan);
+}
+
+static bool sprd_dma_check_trans_done(struct sprd_dma_desc *sdesc,
+ enum sprd_dma_int_type int_type,
+ enum sprd_dma_req_mode req_mode)
+{
+ if (int_type == SPRD_DMA_NO_INT)
+ return false;
+
+ if (int_type >= req_mode + 1)
+ return true;
+ else
+ return false;
+}
+
+static irqreturn_t dma_irq_handle(int irq, void *dev_id)
+{
+ struct sprd_dma_dev *sdev = (struct sprd_dma_dev *)dev_id;
+ u32 irq_status = readl(sdev->glb_base + SPRD_DMA_GLB_INT_MSK_STS);
+ struct sprd_dma_chn *schan;
+ struct sprd_dma_desc *sdesc;
+ enum sprd_dma_req_mode req_type;
+ enum sprd_dma_int_type int_type;
+ bool trans_done = false;
+ u32 i;
+
+ while (irq_status) {
+ i = __ffs(irq_status);
+ irq_status &= (irq_status - 1);
+ schan = &sdev->channels[i];
+
+ spin_lock(&schan->vc.lock);
+ int_type = sprd_dma_get_int_type(schan);
+ req_type = sprd_dma_get_req_type(schan);
+ sprd_dma_clear_int(schan);
+
+ sdesc = schan->cur_desc;
+
+ /* Check if the dma request descriptor is done. */
+ trans_done = sprd_dma_check_trans_done(sdesc, int_type,
+ req_type);
+ if (trans_done == true) {
+ vchan_cookie_complete(&sdesc->vd);
+ schan->cur_desc = NULL;
+ sprd_dma_start(schan);
+ }
+ spin_unlock(&schan->vc.lock);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int sprd_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ int ret;
+
+ ret = pm_runtime_get_sync(chan->device->dev);
+ if (ret < 0)
+ return ret;
+
+ schan->dev_id = SPRD_DMA_SOFTWARE_UID;
+ return 0;
+}
+
+static void sprd_dma_free_chan_resources(struct dma_chan *chan)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&schan->vc.lock, flags);
+ sprd_dma_stop(schan);
+ spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+ vchan_free_chan_resources(&schan->vc);
+ pm_runtime_put(chan->device->dev);
+}
+
+static enum dma_status sprd_dma_tx_status(struct dma_chan *chan,
+ dma_cookie_t cookie,
+ struct dma_tx_state *txstate)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct virt_dma_desc *vd;
+ unsigned long flags;
+ enum dma_status ret;
+ u32 pos;
+
+ ret = dma_cookie_status(chan, cookie, txstate);
+ if (ret == DMA_COMPLETE || !txstate)
+ return ret;
+
+ spin_lock_irqsave(&schan->vc.lock, flags);
+ vd = vchan_find_desc(&schan->vc, cookie);
+ if (vd) {
+ struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
+ struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;
+
+ if (hw->trsc_len > 0)
+ pos = hw->trsc_len;
+ else if (hw->blk_len > 0)
+ pos = hw->blk_len;
+ else if (hw->frg_len > 0)
+ pos = hw->frg_len;
+ else
+ pos = 0;
+ } else if (schan->cur_desc && schan->cur_desc->vd.tx.cookie == cookie) {
+ pos = sprd_dma_get_dst_addr(schan);
+ } else {
+ pos = 0;
+ }
+ spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+ dma_set_residue(txstate, pos);
+ return ret;
+}
+
+static void sprd_dma_issue_pending(struct dma_chan *chan)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&schan->vc.lock, flags);
+ if (vchan_issue_pending(&schan->vc) && !schan->cur_desc)
+ sprd_dma_start(schan);
+ spin_unlock_irqrestore(&schan->vc.lock, flags);
+}
+
+static int sprd_dma_config(struct dma_chan *chan, struct sprd_dma_desc *sdesc,
+ dma_addr_t dest, dma_addr_t src, size_t len)
+{
+ struct sprd_dma_dev *sdev = to_sprd_dma_dev(chan);
+ struct sprd_dma_chn_hw *hw = &sdesc->chn_hw;
+ u32 datawidth, src_step, des_step, fragment_len;
+ u32 block_len, req_mode, irq_mode, transcation_len;
+ u32 fix_mode = 0, fix_en = 0;
+
+ if (IS_ALIGNED(len, 4)) {
+ datawidth = 2;
+ src_step = 4;
+ des_step = 4;
+ } else if (IS_ALIGNED(len, 2)) {
+ datawidth = 1;
+ src_step = 2;
+ des_step = 2;
+ } else {
+ datawidth = 0;
+ src_step = 1;
+ des_step = 1;
+ }
+
+ fragment_len = SPRD_DMA_MEMCPY_MIN_SIZE;
+ if (len <= SPRD_DMA_BLK_LEN_MASK) {
+ block_len = len;
+ transcation_len = 0;
+ req_mode = SPRD_DMA_BLK_REQ;
+ irq_mode = SPRD_DMA_BLK_INT;
+ } else {
+ block_len = SPRD_DMA_MEMCPY_MIN_SIZE;
+ transcation_len = len;
+ req_mode = SPRD_DMA_TRANS_REQ;
+ irq_mode = SPRD_DMA_TRANS_INT;
+ }
+
+ hw->cfg = SPRD_DMA_DONOT_WAIT_BDONE << SPRD_DMA_WAIT_BDONE_OFFSET;
+ hw->wrap_ptr = (u32)((src >> SPRD_DMA_HIGH_ADDR_OFFSET) &
+ SPRD_DMA_HIGH_ADDR_MASK);
+ hw->wrap_to = (u32)((dest >> SPRD_DMA_HIGH_ADDR_OFFSET) &
+ SPRD_DMA_HIGH_ADDR_MASK);
+
+ hw->src_addr = (u32)(src & SPRD_DMA_LOW_ADDR_MASK);
+ hw->des_addr = (u32)(dest & SPRD_DMA_LOW_ADDR_MASK);
+
+ if ((src_step != 0 && des_step != 0) || (src_step | des_step) == 0) {
+ fix_en = 0;
+ } else {
+ fix_en = 1;
+ if (src_step)
+ fix_mode = 1;
+ else
+ fix_mode = 0;
+ }
+
+ hw->frg_len = datawidth << SPRD_DMA_SRC_DATAWIDTH_OFFSET |
+ datawidth << SPRD_DMA_DES_DATAWIDTH_OFFSET |
+ req_mode << SPRD_DMA_REQ_MODE_OFFSET |
+ fix_mode << SPRD_DMA_FIX_SEL_OFFSET |
+ fix_en << SPRD_DMA_FIX_EN_OFFSET |
+ (fragment_len & SPRD_DMA_FRG_LEN_MASK);
+ hw->blk_len = block_len & SPRD_DMA_BLK_LEN_MASK;
+
+ hw->intc = SPRD_DMA_CFG_ERR_INT_EN;
+
+ switch (irq_mode) {
+ case SPRD_DMA_NO_INT:
+ break;
+
+ case SPRD_DMA_FRAG_INT:
+ hw->intc |= SPRD_DMA_FRAG_INT_EN;
+ break;
+
+ case SPRD_DMA_BLK_INT:
+ hw->intc |= SPRD_DMA_BLK_INT_EN;
+ break;
+
+ case SPRD_DMA_BLK_FRAG_INT:
+ hw->intc |= SPRD_DMA_BLK_INT_EN | SPRD_DMA_FRAG_INT_EN;
+ break;
+
+ case SPRD_DMA_TRANS_INT:
+ hw->intc |= SPRD_DMA_TRANS_INT_EN;
+ break;
+
+ case SPRD_DMA_TRANS_FRAG_INT:
+ hw->intc |= SPRD_DMA_TRANS_INT_EN | SPRD_DMA_FRAG_INT_EN;
+ break;
+
+ case SPRD_DMA_TRANS_BLK_INT:
+ hw->intc |= SPRD_DMA_TRANS_INT_EN | SPRD_DMA_BLK_INT_EN;
+ break;
+
+ case SPRD_DMA_LIST_INT:
+ hw->intc |= SPRD_DMA_LIST_INT_EN;
+ break;
+
+ case SPRD_DMA_CFGERR_INT:
+ hw->intc |= SPRD_DMA_CFG_ERR_INT_EN;
+ break;
+
+ default:
+ dev_err(sdev->dma_dev.dev, "invalid irq mode\n");
+ return -EINVAL;
+ }
+
+ if (transcation_len == 0)
+ hw->trsc_len = block_len & SPRD_DMA_TRSC_LEN_MASK;
+ else
+ hw->trsc_len = transcation_len & SPRD_DMA_TRSC_LEN_MASK;
+
+ hw->trsf_step = (des_step & SPRD_DMA_TRSF_STEP_MASK) <<
+ SPRD_DMA_DEST_TRSF_STEP_OFFSET |
+ (src_step & SPRD_DMA_TRSF_STEP_MASK) <<
+ SPRD_DMA_SRC_TRSF_STEP_OFFSET;
+
+ hw->frg_step = 0;
+ hw->src_blk_step = 0;
+ hw->des_blk_step = 0;
+ hw->src_blk_step = 0;
+ return 0;
+}
+
+struct dma_async_tx_descriptor *
+sprd_dma_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct sprd_dma_desc *sdesc;
+ int ret;
+
+ sdesc = kzalloc(sizeof(*sdesc), GFP_NOWAIT);
+ if (!sdesc)
+ return NULL;
+
+ ret = sprd_dma_config(chan, sdesc, dest, src, len);
+ if (ret) {
+ kfree(sdesc);
+ return NULL;
+ }
+
+ return vchan_tx_prep(&schan->vc, &sdesc->vd, flags);
+}
+
+static int sprd_dma_pause(struct dma_chan *chan)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&schan->vc.lock, flags);
+ sprd_dma_pause_resume(schan, true);
+ spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+ return 0;
+}
+
+static int sprd_dma_resume(struct dma_chan *chan)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ unsigned long flags;
+
+ spin_lock_irqsave(&schan->vc.lock, flags);
+ sprd_dma_pause_resume(schan, false);
+ spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+ return 0;
+}
+
+static int sprd_dma_terminate_all(struct dma_chan *chan)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&schan->vc.lock, flags);
+ sprd_dma_stop(schan);
+
+ vchan_get_all_descriptors(&schan->vc, &head);
+ spin_unlock_irqrestore(&schan->vc.lock, flags);
+
+ vchan_dma_desc_free_list(&schan->vc, &head);
+ return 0;
+}
+
+static void sprd_dma_free_desc(struct virt_dma_desc *vd)
+{
+ struct sprd_dma_desc *sdesc = to_sprd_dma_desc(vd);
+
+ kfree(sdesc);
+}
+
+static bool sprd_dma_filter_fn(struct dma_chan *chan, void *param)
+{
+ struct sprd_dma_chn *schan = to_sprd_dma_chan(chan);
+ struct sprd_dma_dev *sdev = to_sprd_dma_dev(&schan->vc.chan);
+ u32 req = *(u32 *)param;
+
+ if (req < sdev->total_chns)
+ return req == schan->chn_num + 1;
+ else
+ return false;
+}
+
+static int sprd_dma_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct sprd_dma_dev *sdev;
+ struct sprd_dma_chn *dma_chn;
+ struct resource *res;
+ u32 chn_count;
+ int ret, i;
+
+ ret = device_property_read_u32(&pdev->dev, "#dma-channels", &chn_count);
+ if (ret) {
+ dev_err(&pdev->dev, "get dma channels count failed\n");
+ return ret;
+ }
+
+ sdev = devm_kzalloc(&pdev->dev, sizeof(*sdev) +
+ sizeof(*dma_chn) * chn_count,
+ GFP_KERNEL);
+ if (!sdev)
+ return -ENOMEM;
+
+ sdev->clk = devm_clk_get(&pdev->dev, "enable");
+ if (IS_ERR(sdev->clk)) {
+ dev_err(&pdev->dev, "get enable clock failed\n");
+ return PTR_ERR(sdev->clk);
+ }
+
+ /* ashb clock is optional for AGCP DMA */
+ sdev->ashb_clk = devm_clk_get(&pdev->dev, "ashb_eb");
+ if (IS_ERR(sdev->ashb_clk))
+ dev_warn(&pdev->dev, "no optional ashb eb clock\n");
+
+ /*
+ * We have three DMA controllers: AP DMA, AON DMA and AGCP DMA. For AGCP
+ * DMA controller, it can or do not request the irq, which will save
+ * system power without resuming system by DMA interrupts if AGCP DMA
+ * does not request the irq. Thus the DMA interrupts property should
+ * be optional.
+ */
+ sdev->irq = platform_get_irq(pdev, 0);
+ if (sdev->irq > 0) {
+ ret = devm_request_irq(&pdev->dev, sdev->irq, dma_irq_handle,
+ 0, "sprd_dma", (void *)sdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "request dma irq failed\n");
+ return ret;
+ }
+ } else {
+ dev_warn(&pdev->dev, "no interrupts for the dma controller\n");
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ sdev->glb_base = devm_ioremap_nocache(&pdev->dev, res->start,
+ resource_size(res));
+ if (!sdev->glb_base)
+ return -ENOMEM;
+
+ dma_cap_set(DMA_MEMCPY, sdev->dma_dev.cap_mask);
+ sdev->total_chns = chn_count;
+ sdev->dma_dev.chancnt = chn_count;
+ INIT_LIST_HEAD(&sdev->dma_dev.channels);
+ INIT_LIST_HEAD(&sdev->dma_dev.global_node);
+ sdev->dma_dev.dev = &pdev->dev;
+ sdev->dma_dev.device_alloc_chan_resources = sprd_dma_alloc_chan_resources;
+ sdev->dma_dev.device_free_chan_resources = sprd_dma_free_chan_resources;
+ sdev->dma_dev.device_tx_status = sprd_dma_tx_status;
+ sdev->dma_dev.device_issue_pending = sprd_dma_issue_pending;
+ sdev->dma_dev.device_prep_dma_memcpy = sprd_dma_prep_dma_memcpy;
+ sdev->dma_dev.device_pause = sprd_dma_pause;
+ sdev->dma_dev.device_resume = sprd_dma_resume;
+ sdev->dma_dev.device_terminate_all = sprd_dma_terminate_all;
+
+ for (i = 0; i < chn_count; i++) {
+ dma_chn = &sdev->channels[i];
+ dma_chn->chn_num = i;
+ dma_chn->cur_desc = NULL;
+ /* get each channel's registers base address. */
+ dma_chn->chn_base = sdev->glb_base + SPRD_DMA_CHN_REG_OFFSET +
+ SPRD_DMA_CHN_REG_LENGTH * i;
+
+ dma_chn->vc.desc_free = sprd_dma_free_desc;
+ vchan_init(&dma_chn->vc, &sdev->dma_dev);
+ }
+
+ platform_set_drvdata(pdev, sdev);
+ ret = sprd_dma_enable(sdev);
+ if (ret)
+ return ret;
+
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ goto err_rpm;
+
+ ret = dma_async_device_register(&sdev->dma_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "register dma device failed:%d\n", ret);
+ goto err_register;
+ }
+
+ sprd_dma_info.dma_cap = sdev->dma_dev.cap_mask;
+ ret = of_dma_controller_register(np, of_dma_simple_xlate,
+ &sprd_dma_info);
+ if (ret)
+ goto err_of_register;
+
+ pm_runtime_put(&pdev->dev);
+ return 0;
+
+err_of_register:
+ dma_async_device_unregister(&sdev->dma_dev);
+err_register:
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+err_rpm:
+ sprd_dma_disable(sdev);
+ return ret;
+}
+
+static int sprd_dma_remove(struct platform_device *pdev)
+{
+ struct sprd_dma_dev *sdev = platform_get_drvdata(pdev);
+ struct sprd_dma_chn *c, *cn;
+ int ret;
+
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0)
+ return ret;
+
+ /* explicitly free the irq */
+ if (sdev->irq > 0)
+ devm_free_irq(&pdev->dev, sdev->irq, sdev);
+
+ list_for_each_entry_safe(c, cn, &sdev->dma_dev.channels,
+ vc.chan.device_node) {
+ list_del(&c->vc.chan.device_node);
+ tasklet_kill(&c->vc.task);
+ }
+
+ of_dma_controller_free(pdev->dev.of_node);
+ dma_async_device_unregister(&sdev->dma_dev);
+ sprd_dma_disable(sdev);
+
+ pm_runtime_put_noidle(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+
+static const struct of_device_id sprd_dma_match[] = {
+ { .compatible = "sprd,sc9860-dma", },
+ {},
+};
+
+static int __maybe_unused sprd_dma_runtime_suspend(struct device *dev)
+{
+ struct sprd_dma_dev *sdev = dev_get_drvdata(dev);
+
+ sprd_dma_disable(sdev);
+ return 0;
+}
+
+static int __maybe_unused sprd_dma_runtime_resume(struct device *dev)
+{
+ struct sprd_dma_dev *sdev = dev_get_drvdata(dev);
+ int ret;
+
+ ret = sprd_dma_enable(sdev);
+ if (ret)
+ dev_err(sdev->dma_dev.dev, "enable dma failed\n");
+
+ return ret;
+}
+
+static const struct dev_pm_ops sprd_dma_pm_ops = {
+ SET_RUNTIME_PM_OPS(sprd_dma_runtime_suspend,
+ sprd_dma_runtime_resume,
+ NULL)
+};
+
+static struct platform_driver sprd_dma_driver = {
+ .probe = sprd_dma_probe,
+ .remove = sprd_dma_remove,
+ .driver = {
+ .name = "sprd-dma",
+ .of_match_table = sprd_dma_match,
+ .pm = &sprd_dma_pm_ops,
+ },
+};
+module_platform_driver(sprd_dma_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("DMA driver for Spreadtrum");
+MODULE_AUTHOR("Baolin Wang <baolin.wang@spreadtrum.com>");
+MODULE_ALIAS("platform:sprd-dma");
diff --git a/drivers/dma/stm32-dmamux.c b/drivers/dma/stm32-dmamux.c
new file mode 100644
index 000000000000..d5db0f6e1ff8
--- /dev/null
+++ b/drivers/dma/stm32-dmamux.c
@@ -0,0 +1,327 @@
+/*
+ *
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ * Pierre-Yves Mordret <pierre-yves.mordret@st.com>
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * DMA Router driver for STM32 DMA MUX
+ *
+ * Based on TI DMA Crossbar driver
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#define STM32_DMAMUX_CCR(x) (0x4 * (x))
+#define STM32_DMAMUX_MAX_DMA_REQUESTS 32
+#define STM32_DMAMUX_MAX_REQUESTS 255
+
+struct stm32_dmamux {
+ u32 master;
+ u32 request;
+ u32 chan_id;
+};
+
+struct stm32_dmamux_data {
+ struct dma_router dmarouter;
+ struct clk *clk;
+ struct reset_control *rst;
+ void __iomem *iomem;
+ u32 dma_requests; /* Number of DMA requests connected to DMAMUX */
+ u32 dmamux_requests; /* Number of DMA requests routed toward DMAs */
+ spinlock_t lock; /* Protects register access */
+ unsigned long *dma_inuse; /* Used DMA channel */
+ u32 dma_reqs[]; /* Number of DMA Request per DMA masters.
+ * [0] holds number of DMA Masters.
+ * To be kept at very end end of this structure
+ */
+};
+
+static inline u32 stm32_dmamux_read(void __iomem *iomem, u32 reg)
+{
+ return readl_relaxed(iomem + reg);
+}
+
+static inline void stm32_dmamux_write(void __iomem *iomem, u32 reg, u32 val)
+{
+ writel_relaxed(val, iomem + reg);
+}
+
+static void stm32_dmamux_free(struct device *dev, void *route_data)
+{
+ struct stm32_dmamux_data *dmamux = dev_get_drvdata(dev);
+ struct stm32_dmamux *mux = route_data;
+ unsigned long flags;
+
+ /* Clear dma request */
+ spin_lock_irqsave(&dmamux->lock, flags);
+
+ stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id), 0);
+ clear_bit(mux->chan_id, dmamux->dma_inuse);
+
+ if (!IS_ERR(dmamux->clk))
+ clk_disable(dmamux->clk);
+
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+
+ dev_dbg(dev, "Unmapping DMAMUX(%u) to DMA%u(%u)\n",
+ mux->request, mux->master, mux->chan_id);
+
+ kfree(mux);
+}
+
+static void *stm32_dmamux_route_allocate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct platform_device *pdev = of_find_device_by_node(ofdma->of_node);
+ struct stm32_dmamux_data *dmamux = platform_get_drvdata(pdev);
+ struct stm32_dmamux *mux;
+ u32 i, min, max;
+ int ret;
+ unsigned long flags;
+
+ if (dma_spec->args_count != 3) {
+ dev_err(&pdev->dev, "invalid number of dma mux args\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ if (dma_spec->args[0] > dmamux->dmamux_requests) {
+ dev_err(&pdev->dev, "invalid mux request number: %d\n",
+ dma_spec->args[0]);
+ return ERR_PTR(-EINVAL);
+ }
+
+ mux = kzalloc(sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return ERR_PTR(-ENOMEM);
+
+ spin_lock_irqsave(&dmamux->lock, flags);
+ mux->chan_id = find_first_zero_bit(dmamux->dma_inuse,
+ dmamux->dma_requests);
+ set_bit(mux->chan_id, dmamux->dma_inuse);
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+
+ if (mux->chan_id == dmamux->dma_requests) {
+ dev_err(&pdev->dev, "Run out of free DMA requests\n");
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ /* Look for DMA Master */
+ for (i = 1, min = 0, max = dmamux->dma_reqs[i];
+ i <= dmamux->dma_reqs[0];
+ min += dmamux->dma_reqs[i], max += dmamux->dma_reqs[++i])
+ if (mux->chan_id < max)
+ break;
+ mux->master = i - 1;
+
+ /* The of_node_put() will be done in of_dma_router_xlate function */
+ dma_spec->np = of_parse_phandle(ofdma->of_node, "dma-masters", i - 1);
+ if (!dma_spec->np) {
+ dev_err(&pdev->dev, "can't get dma master\n");
+ ret = -EINVAL;
+ goto error;
+ }
+
+ /* Set dma request */
+ spin_lock_irqsave(&dmamux->lock, flags);
+ if (!IS_ERR(dmamux->clk)) {
+ ret = clk_enable(dmamux->clk);
+ if (ret < 0) {
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+ dev_err(&pdev->dev, "clk_prep_enable issue: %d\n", ret);
+ goto error;
+ }
+ }
+ spin_unlock_irqrestore(&dmamux->lock, flags);
+
+ mux->request = dma_spec->args[0];
+
+ /* craft DMA spec */
+ dma_spec->args[3] = dma_spec->args[2];
+ dma_spec->args[2] = dma_spec->args[1];
+ dma_spec->args[1] = 0;
+ dma_spec->args[0] = mux->chan_id - min;
+ dma_spec->args_count = 4;
+
+ stm32_dmamux_write(dmamux->iomem, STM32_DMAMUX_CCR(mux->chan_id),
+ mux->request);
+ dev_dbg(&pdev->dev, "Mapping DMAMUX(%u) to DMA%u(%u)\n",
+ mux->request, mux->master, mux->chan_id);
+
+ return mux;
+
+error:
+ clear_bit(mux->chan_id, dmamux->dma_inuse);
+ kfree(mux);
+ return ERR_PTR(ret);
+}
+
+static const struct of_device_id stm32_stm32dma_master_match[] = {
+ { .compatible = "st,stm32-dma", },
+ {},
+};
+
+static int stm32_dmamux_probe(struct platform_device *pdev)
+{
+ struct device_node *node = pdev->dev.of_node;
+ const struct of_device_id *match;
+ struct device_node *dma_node;
+ struct stm32_dmamux_data *stm32_dmamux;
+ struct resource *res;
+ void __iomem *iomem;
+ int i, count, ret;
+ u32 dma_req;
+
+ if (!node)
+ return -ENODEV;
+
+ count = device_property_read_u32_array(&pdev->dev, "dma-masters",
+ NULL, 0);
+ if (count < 0) {
+ dev_err(&pdev->dev, "Can't get DMA master(s) node\n");
+ return -ENODEV;
+ }
+
+ stm32_dmamux = devm_kzalloc(&pdev->dev, sizeof(*stm32_dmamux) +
+ sizeof(u32) * (count + 1), GFP_KERNEL);
+ if (!stm32_dmamux)
+ return -ENOMEM;
+
+ dma_req = 0;
+ for (i = 1; i <= count; i++) {
+ dma_node = of_parse_phandle(node, "dma-masters", i - 1);
+
+ match = of_match_node(stm32_stm32dma_master_match, dma_node);
+ if (!match) {
+ dev_err(&pdev->dev, "DMA master is not supported\n");
+ of_node_put(dma_node);
+ return -EINVAL;
+ }
+
+ if (of_property_read_u32(dma_node, "dma-requests",
+ &stm32_dmamux->dma_reqs[i])) {
+ dev_info(&pdev->dev,
+ "Missing MUX output information, using %u.\n",
+ STM32_DMAMUX_MAX_DMA_REQUESTS);
+ stm32_dmamux->dma_reqs[i] =
+ STM32_DMAMUX_MAX_DMA_REQUESTS;
+ }
+ dma_req += stm32_dmamux->dma_reqs[i];
+ of_node_put(dma_node);
+ }
+
+ if (dma_req > STM32_DMAMUX_MAX_DMA_REQUESTS) {
+ dev_err(&pdev->dev, "Too many DMA Master Requests to manage\n");
+ return -ENODEV;
+ }
+
+ stm32_dmamux->dma_requests = dma_req;
+ stm32_dmamux->dma_reqs[0] = count;
+ stm32_dmamux->dma_inuse = devm_kcalloc(&pdev->dev,
+ BITS_TO_LONGS(dma_req),
+ sizeof(unsigned long),
+ GFP_KERNEL);
+ if (!stm32_dmamux->dma_inuse)
+ return -ENOMEM;
+
+ if (device_property_read_u32(&pdev->dev, "dma-requests",
+ &stm32_dmamux->dmamux_requests)) {
+ stm32_dmamux->dmamux_requests = STM32_DMAMUX_MAX_REQUESTS;
+ dev_warn(&pdev->dev, "DMAMUX defaulting on %u requests\n",
+ stm32_dmamux->dmamux_requests);
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
+
+ iomem = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(iomem))
+ return PTR_ERR(iomem);
+
+ spin_lock_init(&stm32_dmamux->lock);
+
+ stm32_dmamux->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(stm32_dmamux->clk)) {
+ ret = PTR_ERR(stm32_dmamux->clk);
+ if (ret == -EPROBE_DEFER)
+ dev_info(&pdev->dev, "Missing controller clock\n");
+ return ret;
+ }
+
+ stm32_dmamux->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (!IS_ERR(stm32_dmamux->rst)) {
+ reset_control_assert(stm32_dmamux->rst);
+ udelay(2);
+ reset_control_deassert(stm32_dmamux->rst);
+ }
+
+ stm32_dmamux->iomem = iomem;
+ stm32_dmamux->dmarouter.dev = &pdev->dev;
+ stm32_dmamux->dmarouter.route_free = stm32_dmamux_free;
+
+ platform_set_drvdata(pdev, stm32_dmamux);
+
+ if (!IS_ERR(stm32_dmamux->clk)) {
+ ret = clk_prepare_enable(stm32_dmamux->clk);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "clk_prep_enable error: %d\n", ret);
+ return ret;
+ }
+ }
+
+ /* Reset the dmamux */
+ for (i = 0; i < stm32_dmamux->dma_requests; i++)
+ stm32_dmamux_write(stm32_dmamux->iomem, STM32_DMAMUX_CCR(i), 0);
+
+ if (!IS_ERR(stm32_dmamux->clk))
+ clk_disable(stm32_dmamux->clk);
+
+ return of_dma_router_register(node, stm32_dmamux_route_allocate,
+ &stm32_dmamux->dmarouter);
+}
+
+static const struct of_device_id stm32_dmamux_match[] = {
+ { .compatible = "st,stm32h7-dmamux" },
+ {},
+};
+
+static struct platform_driver stm32_dmamux_driver = {
+ .probe = stm32_dmamux_probe,
+ .driver = {
+ .name = "stm32-dmamux",
+ .of_match_table = stm32_dmamux_match,
+ },
+};
+
+static int __init stm32_dmamux_init(void)
+{
+ return platform_driver_register(&stm32_dmamux_driver);
+}
+arch_initcall(stm32_dmamux_init);
+
+MODULE_DESCRIPTION("DMA Router driver for STM32 DMA MUX");
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/stm32-mdma.c b/drivers/dma/stm32-mdma.c
new file mode 100644
index 000000000000..daa1602eb9f5
--- /dev/null
+++ b/drivers/dma/stm32-mdma.c
@@ -0,0 +1,1682 @@
+/*
+ *
+ * Copyright (C) STMicroelectronics SA 2017
+ * Author(s): M'boumba Cedric Madianga <cedric.madianga@gmail.com>
+ * Pierre-Yves Mordret <pierre-yves.mordret@st.com>
+ *
+ * License terms: GPL V2.0.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * Driver for STM32 MDMA controller
+ *
+ * Inspired by stm32-dma.c and dma-jz4780.c
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/jiffies.h>
+#include <linux/list.h>
+#include <linux/log2.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+#include "virt-dma.h"
+
+/* MDMA Generic getter/setter */
+#define STM32_MDMA_SHIFT(n) (ffs(n) - 1)
+#define STM32_MDMA_SET(n, mask) (((n) << STM32_MDMA_SHIFT(mask)) & \
+ (mask))
+#define STM32_MDMA_GET(n, mask) (((n) & (mask)) >> \
+ STM32_MDMA_SHIFT(mask))
+
+#define STM32_MDMA_GISR0 0x0000 /* MDMA Int Status Reg 1 */
+#define STM32_MDMA_GISR1 0x0004 /* MDMA Int Status Reg 2 */
+
+/* MDMA Channel x interrupt/status register */
+#define STM32_MDMA_CISR(x) (0x40 + 0x40 * (x)) /* x = 0..62 */
+#define STM32_MDMA_CISR_CRQA BIT(16)
+#define STM32_MDMA_CISR_TCIF BIT(4)
+#define STM32_MDMA_CISR_BTIF BIT(3)
+#define STM32_MDMA_CISR_BRTIF BIT(2)
+#define STM32_MDMA_CISR_CTCIF BIT(1)
+#define STM32_MDMA_CISR_TEIF BIT(0)
+
+/* MDMA Channel x interrupt flag clear register */
+#define STM32_MDMA_CIFCR(x) (0x44 + 0x40 * (x))
+#define STM32_MDMA_CIFCR_CLTCIF BIT(4)
+#define STM32_MDMA_CIFCR_CBTIF BIT(3)
+#define STM32_MDMA_CIFCR_CBRTIF BIT(2)
+#define STM32_MDMA_CIFCR_CCTCIF BIT(1)
+#define STM32_MDMA_CIFCR_CTEIF BIT(0)
+#define STM32_MDMA_CIFCR_CLEAR_ALL (STM32_MDMA_CIFCR_CLTCIF \
+ | STM32_MDMA_CIFCR_CBTIF \
+ | STM32_MDMA_CIFCR_CBRTIF \
+ | STM32_MDMA_CIFCR_CCTCIF \
+ | STM32_MDMA_CIFCR_CTEIF)
+
+/* MDMA Channel x error status register */
+#define STM32_MDMA_CESR(x) (0x48 + 0x40 * (x))
+#define STM32_MDMA_CESR_BSE BIT(11)
+#define STM32_MDMA_CESR_ASR BIT(10)
+#define STM32_MDMA_CESR_TEMD BIT(9)
+#define STM32_MDMA_CESR_TELD BIT(8)
+#define STM32_MDMA_CESR_TED BIT(7)
+#define STM32_MDMA_CESR_TEA_MASK GENMASK(6, 0)
+
+/* MDMA Channel x control register */
+#define STM32_MDMA_CCR(x) (0x4C + 0x40 * (x))
+#define STM32_MDMA_CCR_SWRQ BIT(16)
+#define STM32_MDMA_CCR_WEX BIT(14)
+#define STM32_MDMA_CCR_HEX BIT(13)
+#define STM32_MDMA_CCR_BEX BIT(12)
+#define STM32_MDMA_CCR_PL_MASK GENMASK(7, 6)
+#define STM32_MDMA_CCR_PL(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CCR_PL_MASK)
+#define STM32_MDMA_CCR_TCIE BIT(5)
+#define STM32_MDMA_CCR_BTIE BIT(4)
+#define STM32_MDMA_CCR_BRTIE BIT(3)
+#define STM32_MDMA_CCR_CTCIE BIT(2)
+#define STM32_MDMA_CCR_TEIE BIT(1)
+#define STM32_MDMA_CCR_EN BIT(0)
+#define STM32_MDMA_CCR_IRQ_MASK (STM32_MDMA_CCR_TCIE \
+ | STM32_MDMA_CCR_BTIE \
+ | STM32_MDMA_CCR_BRTIE \
+ | STM32_MDMA_CCR_CTCIE \
+ | STM32_MDMA_CCR_TEIE)
+
+/* MDMA Channel x transfer configuration register */
+#define STM32_MDMA_CTCR(x) (0x50 + 0x40 * (x))
+#define STM32_MDMA_CTCR_BWM BIT(31)
+#define STM32_MDMA_CTCR_SWRM BIT(30)
+#define STM32_MDMA_CTCR_TRGM_MSK GENMASK(29, 28)
+#define STM32_MDMA_CTCR_TRGM(n) STM32_MDMA_SET((n), \
+ STM32_MDMA_CTCR_TRGM_MSK)
+#define STM32_MDMA_CTCR_TRGM_GET(n) STM32_MDMA_GET((n), \
+ STM32_MDMA_CTCR_TRGM_MSK)
+#define STM32_MDMA_CTCR_PAM_MASK GENMASK(27, 26)
+#define STM32_MDMA_CTCR_PAM(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CTCR_PAM_MASK)
+#define STM32_MDMA_CTCR_PKE BIT(25)
+#define STM32_MDMA_CTCR_TLEN_MSK GENMASK(24, 18)
+#define STM32_MDMA_CTCR_TLEN(n) STM32_MDMA_SET((n), \
+ STM32_MDMA_CTCR_TLEN_MSK)
+#define STM32_MDMA_CTCR_TLEN_GET(n) STM32_MDMA_GET((n), \
+ STM32_MDMA_CTCR_TLEN_MSK)
+#define STM32_MDMA_CTCR_LEN2_MSK GENMASK(25, 18)
+#define STM32_MDMA_CTCR_LEN2(n) STM32_MDMA_SET((n), \
+ STM32_MDMA_CTCR_LEN2_MSK)
+#define STM32_MDMA_CTCR_LEN2_GET(n) STM32_MDMA_GET((n), \
+ STM32_MDMA_CTCR_LEN2_MSK)
+#define STM32_MDMA_CTCR_DBURST_MASK GENMASK(17, 15)
+#define STM32_MDMA_CTCR_DBURST(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CTCR_DBURST_MASK)
+#define STM32_MDMA_CTCR_SBURST_MASK GENMASK(14, 12)
+#define STM32_MDMA_CTCR_SBURST(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CTCR_SBURST_MASK)
+#define STM32_MDMA_CTCR_DINCOS_MASK GENMASK(11, 10)
+#define STM32_MDMA_CTCR_DINCOS(n) STM32_MDMA_SET((n), \
+ STM32_MDMA_CTCR_DINCOS_MASK)
+#define STM32_MDMA_CTCR_SINCOS_MASK GENMASK(9, 8)
+#define STM32_MDMA_CTCR_SINCOS(n) STM32_MDMA_SET((n), \
+ STM32_MDMA_CTCR_SINCOS_MASK)
+#define STM32_MDMA_CTCR_DSIZE_MASK GENMASK(7, 6)
+#define STM32_MDMA_CTCR_DSIZE(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CTCR_DSIZE_MASK)
+#define STM32_MDMA_CTCR_SSIZE_MASK GENMASK(5, 4)
+#define STM32_MDMA_CTCR_SSIZE(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CTCR_SSIZE_MASK)
+#define STM32_MDMA_CTCR_DINC_MASK GENMASK(3, 2)
+#define STM32_MDMA_CTCR_DINC(n) STM32_MDMA_SET((n), \
+ STM32_MDMA_CTCR_DINC_MASK)
+#define STM32_MDMA_CTCR_SINC_MASK GENMASK(1, 0)
+#define STM32_MDMA_CTCR_SINC(n) STM32_MDMA_SET((n), \
+ STM32_MDMA_CTCR_SINC_MASK)
+#define STM32_MDMA_CTCR_CFG_MASK (STM32_MDMA_CTCR_SINC_MASK \
+ | STM32_MDMA_CTCR_DINC_MASK \
+ | STM32_MDMA_CTCR_SINCOS_MASK \
+ | STM32_MDMA_CTCR_DINCOS_MASK \
+ | STM32_MDMA_CTCR_LEN2_MSK \
+ | STM32_MDMA_CTCR_TRGM_MSK)
+
+/* MDMA Channel x block number of data register */
+#define STM32_MDMA_CBNDTR(x) (0x54 + 0x40 * (x))
+#define STM32_MDMA_CBNDTR_BRC_MK GENMASK(31, 20)
+#define STM32_MDMA_CBNDTR_BRC(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CBNDTR_BRC_MK)
+#define STM32_MDMA_CBNDTR_BRC_GET(n) STM32_MDMA_GET((n), \
+ STM32_MDMA_CBNDTR_BRC_MK)
+
+#define STM32_MDMA_CBNDTR_BRDUM BIT(19)
+#define STM32_MDMA_CBNDTR_BRSUM BIT(18)
+#define STM32_MDMA_CBNDTR_BNDT_MASK GENMASK(16, 0)
+#define STM32_MDMA_CBNDTR_BNDT(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CBNDTR_BNDT_MASK)
+
+/* MDMA Channel x source address register */
+#define STM32_MDMA_CSAR(x) (0x58 + 0x40 * (x))
+
+/* MDMA Channel x destination address register */
+#define STM32_MDMA_CDAR(x) (0x5C + 0x40 * (x))
+
+/* MDMA Channel x block repeat address update register */
+#define STM32_MDMA_CBRUR(x) (0x60 + 0x40 * (x))
+#define STM32_MDMA_CBRUR_DUV_MASK GENMASK(31, 16)
+#define STM32_MDMA_CBRUR_DUV(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CBRUR_DUV_MASK)
+#define STM32_MDMA_CBRUR_SUV_MASK GENMASK(15, 0)
+#define STM32_MDMA_CBRUR_SUV(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CBRUR_SUV_MASK)
+
+/* MDMA Channel x link address register */
+#define STM32_MDMA_CLAR(x) (0x64 + 0x40 * (x))
+
+/* MDMA Channel x trigger and bus selection register */
+#define STM32_MDMA_CTBR(x) (0x68 + 0x40 * (x))
+#define STM32_MDMA_CTBR_DBUS BIT(17)
+#define STM32_MDMA_CTBR_SBUS BIT(16)
+#define STM32_MDMA_CTBR_TSEL_MASK GENMASK(7, 0)
+#define STM32_MDMA_CTBR_TSEL(n) STM32_MDMA_SET(n, \
+ STM32_MDMA_CTBR_TSEL_MASK)
+
+/* MDMA Channel x mask address register */
+#define STM32_MDMA_CMAR(x) (0x70 + 0x40 * (x))
+
+/* MDMA Channel x mask data register */
+#define STM32_MDMA_CMDR(x) (0x74 + 0x40 * (x))
+
+#define STM32_MDMA_MAX_BUF_LEN 128
+#define STM32_MDMA_MAX_BLOCK_LEN 65536
+#define STM32_MDMA_MAX_CHANNELS 63
+#define STM32_MDMA_MAX_REQUESTS 256
+#define STM32_MDMA_MAX_BURST 128
+#define STM32_MDMA_VERY_HIGH_PRIORITY 0x11
+
+enum stm32_mdma_trigger_mode {
+ STM32_MDMA_BUFFER,
+ STM32_MDMA_BLOCK,
+ STM32_MDMA_BLOCK_REP,
+ STM32_MDMA_LINKED_LIST,
+};
+
+enum stm32_mdma_width {
+ STM32_MDMA_BYTE,
+ STM32_MDMA_HALF_WORD,
+ STM32_MDMA_WORD,
+ STM32_MDMA_DOUBLE_WORD,
+};
+
+enum stm32_mdma_inc_mode {
+ STM32_MDMA_FIXED = 0,
+ STM32_MDMA_INC = 2,
+ STM32_MDMA_DEC = 3,
+};
+
+struct stm32_mdma_chan_config {
+ u32 request;
+ u32 priority_level;
+ u32 transfer_config;
+ u32 mask_addr;
+ u32 mask_data;
+};
+
+struct stm32_mdma_hwdesc {
+ u32 ctcr;
+ u32 cbndtr;
+ u32 csar;
+ u32 cdar;
+ u32 cbrur;
+ u32 clar;
+ u32 ctbr;
+ u32 dummy;
+ u32 cmar;
+ u32 cmdr;
+} __aligned(64);
+
+struct stm32_mdma_desc {
+ struct virt_dma_desc vdesc;
+ u32 ccr;
+ struct stm32_mdma_hwdesc *hwdesc;
+ dma_addr_t hwdesc_phys;
+ bool cyclic;
+ u32 count;
+};
+
+struct stm32_mdma_chan {
+ struct virt_dma_chan vchan;
+ struct dma_pool *desc_pool;
+ u32 id;
+ struct stm32_mdma_desc *desc;
+ u32 curr_hwdesc;
+ struct dma_slave_config dma_config;
+ struct stm32_mdma_chan_config chan_config;
+ bool busy;
+ u32 mem_burst;
+ u32 mem_width;
+};
+
+struct stm32_mdma_device {
+ struct dma_device ddev;
+ void __iomem *base;
+ struct clk *clk;
+ int irq;
+ struct reset_control *rst;
+ u32 nr_channels;
+ u32 nr_requests;
+ u32 nr_ahb_addr_masks;
+ struct stm32_mdma_chan chan[STM32_MDMA_MAX_CHANNELS];
+ u32 ahb_addr_masks[];
+};
+
+static struct stm32_mdma_device *stm32_mdma_get_dev(
+ struct stm32_mdma_chan *chan)
+{
+ return container_of(chan->vchan.chan.device, struct stm32_mdma_device,
+ ddev);
+}
+
+static struct stm32_mdma_chan *to_stm32_mdma_chan(struct dma_chan *c)
+{
+ return container_of(c, struct stm32_mdma_chan, vchan.chan);
+}
+
+static struct stm32_mdma_desc *to_stm32_mdma_desc(struct virt_dma_desc *vdesc)
+{
+ return container_of(vdesc, struct stm32_mdma_desc, vdesc);
+}
+
+static struct device *chan2dev(struct stm32_mdma_chan *chan)
+{
+ return &chan->vchan.chan.dev->device;
+}
+
+static struct device *mdma2dev(struct stm32_mdma_device *mdma_dev)
+{
+ return mdma_dev->ddev.dev;
+}
+
+static u32 stm32_mdma_read(struct stm32_mdma_device *dmadev, u32 reg)
+{
+ return readl_relaxed(dmadev->base + reg);
+}
+
+static void stm32_mdma_write(struct stm32_mdma_device *dmadev, u32 reg, u32 val)
+{
+ writel_relaxed(val, dmadev->base + reg);
+}
+
+static void stm32_mdma_set_bits(struct stm32_mdma_device *dmadev, u32 reg,
+ u32 mask)
+{
+ void __iomem *addr = dmadev->base + reg;
+
+ writel_relaxed(readl_relaxed(addr) | mask, addr);
+}
+
+static void stm32_mdma_clr_bits(struct stm32_mdma_device *dmadev, u32 reg,
+ u32 mask)
+{
+ void __iomem *addr = dmadev->base + reg;
+
+ writel_relaxed(readl_relaxed(addr) & ~mask, addr);
+}
+
+static struct stm32_mdma_desc *stm32_mdma_alloc_desc(
+ struct stm32_mdma_chan *chan, u32 count)
+{
+ struct stm32_mdma_desc *desc;
+
+ desc = kzalloc(sizeof(*desc), GFP_NOWAIT);
+ if (!desc)
+ return NULL;
+
+ desc->hwdesc = dma_pool_alloc(chan->desc_pool, GFP_NOWAIT,
+ &desc->hwdesc_phys);
+ if (!desc->hwdesc) {
+ dev_err(chan2dev(chan), "Failed to allocate descriptor\n");
+ kfree(desc);
+ return NULL;
+ }
+
+ desc->count = count;
+
+ return desc;
+}
+
+static void stm32_mdma_desc_free(struct virt_dma_desc *vdesc)
+{
+ struct stm32_mdma_desc *desc = to_stm32_mdma_desc(vdesc);
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(vdesc->tx.chan);
+
+ dma_pool_free(chan->desc_pool, desc->hwdesc, desc->hwdesc_phys);
+ kfree(desc);
+}
+
+static int stm32_mdma_get_width(struct stm32_mdma_chan *chan,
+ enum dma_slave_buswidth width)
+{
+ switch (width) {
+ case DMA_SLAVE_BUSWIDTH_1_BYTE:
+ case DMA_SLAVE_BUSWIDTH_2_BYTES:
+ case DMA_SLAVE_BUSWIDTH_4_BYTES:
+ case DMA_SLAVE_BUSWIDTH_8_BYTES:
+ return ffs(width) - 1;
+ default:
+ dev_err(chan2dev(chan), "Dma bus width %i not supported\n",
+ width);
+ return -EINVAL;
+ }
+}
+
+static enum dma_slave_buswidth stm32_mdma_get_max_width(dma_addr_t addr,
+ u32 buf_len, u32 tlen)
+{
+ enum dma_slave_buswidth max_width = DMA_SLAVE_BUSWIDTH_8_BYTES;
+
+ for (max_width = DMA_SLAVE_BUSWIDTH_8_BYTES;
+ max_width > DMA_SLAVE_BUSWIDTH_1_BYTE;
+ max_width >>= 1) {
+ /*
+ * Address and buffer length both have to be aligned on
+ * bus width
+ */
+ if ((((buf_len | addr) & (max_width - 1)) == 0) &&
+ tlen >= max_width)
+ break;
+ }
+
+ return max_width;
+}
+
+static u32 stm32_mdma_get_best_burst(u32 buf_len, u32 tlen, u32 max_burst,
+ enum dma_slave_buswidth width)
+{
+ u32 best_burst = max_burst;
+ u32 burst_len = best_burst * width;
+
+ while ((burst_len > 0) && (tlen % burst_len)) {
+ best_burst = best_burst >> 1;
+ burst_len = best_burst * width;
+ }
+
+ return (best_burst > 0) ? best_burst : 1;
+}
+
+static int stm32_mdma_disable_chan(struct stm32_mdma_chan *chan)
+{
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ u32 ccr, cisr, id, reg;
+ int ret;
+
+ id = chan->id;
+ reg = STM32_MDMA_CCR(id);
+
+ /* Disable interrupts */
+ stm32_mdma_clr_bits(dmadev, reg, STM32_MDMA_CCR_IRQ_MASK);
+
+ ccr = stm32_mdma_read(dmadev, reg);
+ if (ccr & STM32_MDMA_CCR_EN) {
+ stm32_mdma_clr_bits(dmadev, reg, STM32_MDMA_CCR_EN);
+
+ /* Ensure that any ongoing transfer has been completed */
+ ret = readl_relaxed_poll_timeout_atomic(
+ dmadev->base + STM32_MDMA_CISR(id), cisr,
+ (cisr & STM32_MDMA_CISR_CTCIF), 10, 1000);
+ if (ret) {
+ dev_err(chan2dev(chan), "%s: timeout!\n", __func__);
+ return -EBUSY;
+ }
+ }
+
+ return 0;
+}
+
+static void stm32_mdma_stop(struct stm32_mdma_chan *chan)
+{
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ u32 status;
+ int ret;
+
+ /* Disable DMA */
+ ret = stm32_mdma_disable_chan(chan);
+ if (ret < 0)
+ return;
+
+ /* Clear interrupt status if it is there */
+ status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(chan->id));
+ if (status) {
+ dev_dbg(chan2dev(chan), "%s(): clearing interrupt: 0x%08x\n",
+ __func__, status);
+ stm32_mdma_set_bits(dmadev, STM32_MDMA_CIFCR(chan->id), status);
+ }
+
+ chan->busy = false;
+}
+
+static void stm32_mdma_set_bus(struct stm32_mdma_device *dmadev, u32 *ctbr,
+ u32 ctbr_mask, u32 src_addr)
+{
+ u32 mask;
+ int i;
+
+ /* Check if memory device is on AHB or AXI */
+ *ctbr &= ~ctbr_mask;
+ mask = src_addr & 0xF0000000;
+ for (i = 0; i < dmadev->nr_ahb_addr_masks; i++) {
+ if (mask == dmadev->ahb_addr_masks[i]) {
+ *ctbr |= ctbr_mask;
+ break;
+ }
+ }
+}
+
+static int stm32_mdma_set_xfer_param(struct stm32_mdma_chan *chan,
+ enum dma_transfer_direction direction,
+ u32 *mdma_ccr, u32 *mdma_ctcr,
+ u32 *mdma_ctbr, dma_addr_t addr,
+ u32 buf_len)
+{
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ struct stm32_mdma_chan_config *chan_config = &chan->chan_config;
+ enum dma_slave_buswidth src_addr_width, dst_addr_width;
+ phys_addr_t src_addr, dst_addr;
+ int src_bus_width, dst_bus_width;
+ u32 src_maxburst, dst_maxburst, src_best_burst, dst_best_burst;
+ u32 ccr, ctcr, ctbr, tlen;
+
+ src_addr_width = chan->dma_config.src_addr_width;
+ dst_addr_width = chan->dma_config.dst_addr_width;
+ src_maxburst = chan->dma_config.src_maxburst;
+ dst_maxburst = chan->dma_config.dst_maxburst;
+
+ ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id));
+ ctcr = stm32_mdma_read(dmadev, STM32_MDMA_CTCR(chan->id));
+ ctbr = stm32_mdma_read(dmadev, STM32_MDMA_CTBR(chan->id));
+
+ /* Enable HW request mode */
+ ctcr &= ~STM32_MDMA_CTCR_SWRM;
+
+ /* Set DINC, SINC, DINCOS, SINCOS, TRGM and TLEN retrieve from DT */
+ ctcr &= ~STM32_MDMA_CTCR_CFG_MASK;
+ ctcr |= chan_config->transfer_config & STM32_MDMA_CTCR_CFG_MASK;
+
+ /*
+ * For buffer transfer length (TLEN) we have to set
+ * the number of bytes - 1 in CTCR register
+ */
+ tlen = STM32_MDMA_CTCR_LEN2_GET(ctcr);
+ ctcr &= ~STM32_MDMA_CTCR_LEN2_MSK;
+ ctcr |= STM32_MDMA_CTCR_TLEN((tlen - 1));
+
+ /* Disable Pack Enable */
+ ctcr &= ~STM32_MDMA_CTCR_PKE;
+
+ /* Check burst size constraints */
+ if (src_maxburst * src_addr_width > STM32_MDMA_MAX_BURST ||
+ dst_maxburst * dst_addr_width > STM32_MDMA_MAX_BURST) {
+ dev_err(chan2dev(chan),
+ "burst size * bus width higher than %d bytes\n",
+ STM32_MDMA_MAX_BURST);
+ return -EINVAL;
+ }
+
+ if ((!is_power_of_2(src_maxburst) && src_maxburst > 0) ||
+ (!is_power_of_2(dst_maxburst) && dst_maxburst > 0)) {
+ dev_err(chan2dev(chan), "burst size must be a power of 2\n");
+ return -EINVAL;
+ }
+
+ /*
+ * Configure channel control:
+ * - Clear SW request as in this case this is a HW one
+ * - Clear WEX, HEX and BEX bits
+ * - Set priority level
+ */
+ ccr &= ~(STM32_MDMA_CCR_SWRQ | STM32_MDMA_CCR_WEX | STM32_MDMA_CCR_HEX |
+ STM32_MDMA_CCR_BEX | STM32_MDMA_CCR_PL_MASK);
+ ccr |= STM32_MDMA_CCR_PL(chan_config->priority_level);
+
+ /* Configure Trigger selection */
+ ctbr &= ~STM32_MDMA_CTBR_TSEL_MASK;
+ ctbr |= STM32_MDMA_CTBR_TSEL(chan_config->request);
+
+ switch (direction) {
+ case DMA_MEM_TO_DEV:
+ dst_addr = chan->dma_config.dst_addr;
+
+ /* Set device data size */
+ dst_bus_width = stm32_mdma_get_width(chan, dst_addr_width);
+ if (dst_bus_width < 0)
+ return dst_bus_width;
+ ctcr &= ~STM32_MDMA_CTCR_DSIZE_MASK;
+ ctcr |= STM32_MDMA_CTCR_DSIZE(dst_bus_width);
+
+ /* Set device burst value */
+ dst_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
+ dst_maxburst,
+ dst_addr_width);
+ chan->mem_burst = dst_best_burst;
+ ctcr &= ~STM32_MDMA_CTCR_DBURST_MASK;
+ ctcr |= STM32_MDMA_CTCR_DBURST((ilog2(dst_best_burst)));
+
+ /* Set memory data size */
+ src_addr_width = stm32_mdma_get_max_width(addr, buf_len, tlen);
+ chan->mem_width = src_addr_width;
+ src_bus_width = stm32_mdma_get_width(chan, src_addr_width);
+ if (src_bus_width < 0)
+ return src_bus_width;
+ ctcr &= ~STM32_MDMA_CTCR_SSIZE_MASK |
+ STM32_MDMA_CTCR_SINCOS_MASK;
+ ctcr |= STM32_MDMA_CTCR_SSIZE(src_bus_width) |
+ STM32_MDMA_CTCR_SINCOS(src_bus_width);
+
+ /* Set memory burst value */
+ src_maxburst = STM32_MDMA_MAX_BUF_LEN / src_addr_width;
+ src_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
+ src_maxburst,
+ src_addr_width);
+ chan->mem_burst = src_best_burst;
+ ctcr &= ~STM32_MDMA_CTCR_SBURST_MASK;
+ ctcr |= STM32_MDMA_CTCR_SBURST((ilog2(src_best_burst)));
+
+ /* Select bus */
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS,
+ dst_addr);
+
+ if (dst_bus_width != src_bus_width)
+ ctcr |= STM32_MDMA_CTCR_PKE;
+
+ /* Set destination address */
+ stm32_mdma_write(dmadev, STM32_MDMA_CDAR(chan->id), dst_addr);
+ break;
+
+ case DMA_DEV_TO_MEM:
+ src_addr = chan->dma_config.src_addr;
+
+ /* Set device data size */
+ src_bus_width = stm32_mdma_get_width(chan, src_addr_width);
+ if (src_bus_width < 0)
+ return src_bus_width;
+ ctcr &= ~STM32_MDMA_CTCR_SSIZE_MASK;
+ ctcr |= STM32_MDMA_CTCR_SSIZE(src_bus_width);
+
+ /* Set device burst value */
+ src_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
+ src_maxburst,
+ src_addr_width);
+ ctcr &= ~STM32_MDMA_CTCR_SBURST_MASK;
+ ctcr |= STM32_MDMA_CTCR_SBURST((ilog2(src_best_burst)));
+
+ /* Set memory data size */
+ dst_addr_width = stm32_mdma_get_max_width(addr, buf_len, tlen);
+ chan->mem_width = dst_addr_width;
+ dst_bus_width = stm32_mdma_get_width(chan, dst_addr_width);
+ if (dst_bus_width < 0)
+ return dst_bus_width;
+ ctcr &= ~(STM32_MDMA_CTCR_DSIZE_MASK |
+ STM32_MDMA_CTCR_DINCOS_MASK);
+ ctcr |= STM32_MDMA_CTCR_DSIZE(dst_bus_width) |
+ STM32_MDMA_CTCR_DINCOS(dst_bus_width);
+
+ /* Set memory burst value */
+ dst_maxburst = STM32_MDMA_MAX_BUF_LEN / dst_addr_width;
+ dst_best_burst = stm32_mdma_get_best_burst(buf_len, tlen,
+ dst_maxburst,
+ dst_addr_width);
+ ctcr &= ~STM32_MDMA_CTCR_DBURST_MASK;
+ ctcr |= STM32_MDMA_CTCR_DBURST((ilog2(dst_best_burst)));
+
+ /* Select bus */
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS,
+ src_addr);
+
+ if (dst_bus_width != src_bus_width)
+ ctcr |= STM32_MDMA_CTCR_PKE;
+
+ /* Set source address */
+ stm32_mdma_write(dmadev, STM32_MDMA_CSAR(chan->id), src_addr);
+ break;
+
+ default:
+ dev_err(chan2dev(chan), "Dma direction is not supported\n");
+ return -EINVAL;
+ }
+
+ *mdma_ccr = ccr;
+ *mdma_ctcr = ctcr;
+ *mdma_ctbr = ctbr;
+
+ return 0;
+}
+
+static void stm32_mdma_dump_hwdesc(struct stm32_mdma_chan *chan,
+ struct stm32_mdma_hwdesc *hwdesc)
+{
+ dev_dbg(chan2dev(chan), "hwdesc: 0x%p\n", hwdesc);
+ dev_dbg(chan2dev(chan), "CTCR: 0x%08x\n", hwdesc->ctcr);
+ dev_dbg(chan2dev(chan), "CBNDTR: 0x%08x\n", hwdesc->cbndtr);
+ dev_dbg(chan2dev(chan), "CSAR: 0x%08x\n", hwdesc->csar);
+ dev_dbg(chan2dev(chan), "CDAR: 0x%08x\n", hwdesc->cdar);
+ dev_dbg(chan2dev(chan), "CBRUR: 0x%08x\n", hwdesc->cbrur);
+ dev_dbg(chan2dev(chan), "CLAR: 0x%08x\n", hwdesc->clar);
+ dev_dbg(chan2dev(chan), "CTBR: 0x%08x\n", hwdesc->ctbr);
+ dev_dbg(chan2dev(chan), "CMAR: 0x%08x\n", hwdesc->cmar);
+ dev_dbg(chan2dev(chan), "CMDR: 0x%08x\n\n", hwdesc->cmdr);
+}
+
+static void stm32_mdma_setup_hwdesc(struct stm32_mdma_chan *chan,
+ struct stm32_mdma_desc *desc,
+ enum dma_transfer_direction dir, u32 count,
+ dma_addr_t src_addr, dma_addr_t dst_addr,
+ u32 len, u32 ctcr, u32 ctbr, bool is_last,
+ bool is_first, bool is_cyclic)
+{
+ struct stm32_mdma_chan_config *config = &chan->chan_config;
+ struct stm32_mdma_hwdesc *hwdesc;
+ u32 next = count + 1;
+
+ hwdesc = &desc->hwdesc[count];
+ hwdesc->ctcr = ctcr;
+ hwdesc->cbndtr &= ~(STM32_MDMA_CBNDTR_BRC_MK |
+ STM32_MDMA_CBNDTR_BRDUM |
+ STM32_MDMA_CBNDTR_BRSUM |
+ STM32_MDMA_CBNDTR_BNDT_MASK);
+ hwdesc->cbndtr |= STM32_MDMA_CBNDTR_BNDT(len);
+ hwdesc->csar = src_addr;
+ hwdesc->cdar = dst_addr;
+ hwdesc->cbrur = 0;
+ hwdesc->clar = desc->hwdesc_phys + next * sizeof(*hwdesc);
+ hwdesc->ctbr = ctbr;
+ hwdesc->cmar = config->mask_addr;
+ hwdesc->cmdr = config->mask_data;
+
+ if (is_last) {
+ if (is_cyclic)
+ hwdesc->clar = desc->hwdesc_phys;
+ else
+ hwdesc->clar = 0;
+ }
+
+ stm32_mdma_dump_hwdesc(chan, hwdesc);
+}
+
+static int stm32_mdma_setup_xfer(struct stm32_mdma_chan *chan,
+ struct stm32_mdma_desc *desc,
+ struct scatterlist *sgl, u32 sg_len,
+ enum dma_transfer_direction direction)
+{
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ struct dma_slave_config *dma_config = &chan->dma_config;
+ struct scatterlist *sg;
+ dma_addr_t src_addr, dst_addr;
+ u32 ccr, ctcr, ctbr;
+ int i, ret = 0;
+
+ for_each_sg(sgl, sg, sg_len, i) {
+ if (sg_dma_len(sg) > STM32_MDMA_MAX_BLOCK_LEN) {
+ dev_err(chan2dev(chan), "Invalid block len\n");
+ return -EINVAL;
+ }
+
+ if (direction == DMA_MEM_TO_DEV) {
+ src_addr = sg_dma_address(sg);
+ dst_addr = dma_config->dst_addr;
+ ret = stm32_mdma_set_xfer_param(chan, direction, &ccr,
+ &ctcr, &ctbr, src_addr,
+ sg_dma_len(sg));
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS,
+ src_addr);
+ } else {
+ src_addr = dma_config->src_addr;
+ dst_addr = sg_dma_address(sg);
+ ret = stm32_mdma_set_xfer_param(chan, direction, &ccr,
+ &ctcr, &ctbr, dst_addr,
+ sg_dma_len(sg));
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS,
+ dst_addr);
+ }
+
+ if (ret < 0)
+ return ret;
+
+ stm32_mdma_setup_hwdesc(chan, desc, direction, i, src_addr,
+ dst_addr, sg_dma_len(sg), ctcr, ctbr,
+ i == sg_len - 1, i == 0, false);
+ }
+
+ /* Enable interrupts */
+ ccr &= ~STM32_MDMA_CCR_IRQ_MASK;
+ ccr |= STM32_MDMA_CCR_TEIE | STM32_MDMA_CCR_CTCIE;
+ if (sg_len > 1)
+ ccr |= STM32_MDMA_CCR_BTIE;
+ desc->ccr = ccr;
+
+ return 0;
+}
+
+static struct dma_async_tx_descriptor *
+stm32_mdma_prep_slave_sg(struct dma_chan *c, struct scatterlist *sgl,
+ u32 sg_len, enum dma_transfer_direction direction,
+ unsigned long flags, void *context)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ struct stm32_mdma_desc *desc;
+ int ret;
+
+ /*
+ * Once DMA is in setup cyclic mode the channel we cannot assign this
+ * channel anymore. The DMA channel needs to be aborted or terminated
+ * for allowing another request.
+ */
+ if (chan->desc && chan->desc->cyclic) {
+ dev_err(chan2dev(chan),
+ "Request not allowed when dma in cyclic mode\n");
+ return NULL;
+ }
+
+ desc = stm32_mdma_alloc_desc(chan, sg_len);
+ if (!desc)
+ return NULL;
+
+ ret = stm32_mdma_setup_xfer(chan, desc, sgl, sg_len, direction);
+ if (ret < 0)
+ goto xfer_setup_err;
+
+ desc->cyclic = false;
+
+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
+
+xfer_setup_err:
+ dma_pool_free(chan->desc_pool, &desc->hwdesc, desc->hwdesc_phys);
+ kfree(desc);
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *
+stm32_mdma_prep_dma_cyclic(struct dma_chan *c, dma_addr_t buf_addr,
+ size_t buf_len, size_t period_len,
+ enum dma_transfer_direction direction,
+ unsigned long flags)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ struct dma_slave_config *dma_config = &chan->dma_config;
+ struct stm32_mdma_desc *desc;
+ dma_addr_t src_addr, dst_addr;
+ u32 ccr, ctcr, ctbr, count;
+ int i, ret;
+
+ /*
+ * Once DMA is in setup cyclic mode the channel we cannot assign this
+ * channel anymore. The DMA channel needs to be aborted or terminated
+ * for allowing another request.
+ */
+ if (chan->desc && chan->desc->cyclic) {
+ dev_err(chan2dev(chan),
+ "Request not allowed when dma in cyclic mode\n");
+ return NULL;
+ }
+
+ if (!buf_len || !period_len || period_len > STM32_MDMA_MAX_BLOCK_LEN) {
+ dev_err(chan2dev(chan), "Invalid buffer/period len\n");
+ return NULL;
+ }
+
+ if (buf_len % period_len) {
+ dev_err(chan2dev(chan), "buf_len not multiple of period_len\n");
+ return NULL;
+ }
+
+ count = buf_len / period_len;
+
+ desc = stm32_mdma_alloc_desc(chan, count);
+ if (!desc)
+ return NULL;
+
+ /* Select bus */
+ if (direction == DMA_MEM_TO_DEV) {
+ src_addr = buf_addr;
+ ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr,
+ &ctbr, src_addr, period_len);
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS,
+ src_addr);
+ } else {
+ dst_addr = buf_addr;
+ ret = stm32_mdma_set_xfer_param(chan, direction, &ccr, &ctcr,
+ &ctbr, dst_addr, period_len);
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS,
+ dst_addr);
+ }
+
+ if (ret < 0)
+ goto xfer_setup_err;
+
+ /* Enable interrupts */
+ ccr &= ~STM32_MDMA_CCR_IRQ_MASK;
+ ccr |= STM32_MDMA_CCR_TEIE | STM32_MDMA_CCR_CTCIE | STM32_MDMA_CCR_BTIE;
+ desc->ccr = ccr;
+
+ /* Configure hwdesc list */
+ for (i = 0; i < count; i++) {
+ if (direction == DMA_MEM_TO_DEV) {
+ src_addr = buf_addr + i * period_len;
+ dst_addr = dma_config->dst_addr;
+ } else {
+ src_addr = dma_config->src_addr;
+ dst_addr = buf_addr + i * period_len;
+ }
+
+ stm32_mdma_setup_hwdesc(chan, desc, direction, i, src_addr,
+ dst_addr, period_len, ctcr, ctbr,
+ i == count - 1, i == 0, true);
+ }
+
+ desc->cyclic = true;
+
+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
+
+xfer_setup_err:
+ dma_pool_free(chan->desc_pool, &desc->hwdesc, desc->hwdesc_phys);
+ kfree(desc);
+ return NULL;
+}
+
+static struct dma_async_tx_descriptor *
+stm32_mdma_prep_dma_memcpy(struct dma_chan *c, dma_addr_t dest, dma_addr_t src,
+ size_t len, unsigned long flags)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ enum dma_slave_buswidth max_width;
+ struct stm32_mdma_desc *desc;
+ struct stm32_mdma_hwdesc *hwdesc;
+ u32 ccr, ctcr, ctbr, cbndtr, count, max_burst, mdma_burst;
+ u32 best_burst, tlen;
+ size_t xfer_count, offset;
+ int src_bus_width, dst_bus_width;
+ int i;
+
+ /*
+ * Once DMA is in setup cyclic mode the channel we cannot assign this
+ * channel anymore. The DMA channel needs to be aborted or terminated
+ * to allow another request
+ */
+ if (chan->desc && chan->desc->cyclic) {
+ dev_err(chan2dev(chan),
+ "Request not allowed when dma in cyclic mode\n");
+ return NULL;
+ }
+
+ count = DIV_ROUND_UP(len, STM32_MDMA_MAX_BLOCK_LEN);
+ desc = stm32_mdma_alloc_desc(chan, count);
+ if (!desc)
+ return NULL;
+
+ ccr = stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id));
+ ctcr = stm32_mdma_read(dmadev, STM32_MDMA_CTCR(chan->id));
+ ctbr = stm32_mdma_read(dmadev, STM32_MDMA_CTBR(chan->id));
+ cbndtr = stm32_mdma_read(dmadev, STM32_MDMA_CBNDTR(chan->id));
+
+ /* Enable sw req, some interrupts and clear other bits */
+ ccr &= ~(STM32_MDMA_CCR_WEX | STM32_MDMA_CCR_HEX |
+ STM32_MDMA_CCR_BEX | STM32_MDMA_CCR_PL_MASK |
+ STM32_MDMA_CCR_IRQ_MASK);
+ ccr |= STM32_MDMA_CCR_TEIE;
+
+ /* Enable SW request mode, dest/src inc and clear other bits */
+ ctcr &= ~(STM32_MDMA_CTCR_BWM | STM32_MDMA_CTCR_TRGM_MSK |
+ STM32_MDMA_CTCR_PAM_MASK | STM32_MDMA_CTCR_PKE |
+ STM32_MDMA_CTCR_TLEN_MSK | STM32_MDMA_CTCR_DBURST_MASK |
+ STM32_MDMA_CTCR_SBURST_MASK | STM32_MDMA_CTCR_DINCOS_MASK |
+ STM32_MDMA_CTCR_SINCOS_MASK | STM32_MDMA_CTCR_DSIZE_MASK |
+ STM32_MDMA_CTCR_SSIZE_MASK | STM32_MDMA_CTCR_DINC_MASK |
+ STM32_MDMA_CTCR_SINC_MASK);
+ ctcr |= STM32_MDMA_CTCR_SWRM | STM32_MDMA_CTCR_SINC(STM32_MDMA_INC) |
+ STM32_MDMA_CTCR_DINC(STM32_MDMA_INC);
+
+ /* Reset HW request */
+ ctbr &= ~STM32_MDMA_CTBR_TSEL_MASK;
+
+ /* Select bus */
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_SBUS, src);
+ stm32_mdma_set_bus(dmadev, &ctbr, STM32_MDMA_CTBR_DBUS, dest);
+
+ /* Clear CBNDTR registers */
+ cbndtr &= ~(STM32_MDMA_CBNDTR_BRC_MK | STM32_MDMA_CBNDTR_BRDUM |
+ STM32_MDMA_CBNDTR_BRSUM | STM32_MDMA_CBNDTR_BNDT_MASK);
+
+ if (len <= STM32_MDMA_MAX_BLOCK_LEN) {
+ cbndtr |= STM32_MDMA_CBNDTR_BNDT(len);
+ if (len <= STM32_MDMA_MAX_BUF_LEN) {
+ /* Setup a buffer transfer */
+ ccr |= STM32_MDMA_CCR_TCIE | STM32_MDMA_CCR_CTCIE;
+ ctcr |= STM32_MDMA_CTCR_TRGM(STM32_MDMA_BUFFER);
+ } else {
+ /* Setup a block transfer */
+ ccr |= STM32_MDMA_CCR_BTIE | STM32_MDMA_CCR_CTCIE;
+ ctcr |= STM32_MDMA_CTCR_TRGM(STM32_MDMA_BLOCK);
+ }
+
+ tlen = STM32_MDMA_MAX_BUF_LEN;
+ ctcr |= STM32_MDMA_CTCR_TLEN((tlen - 1));
+
+ /* Set source best burst size */
+ max_width = stm32_mdma_get_max_width(src, len, tlen);
+ src_bus_width = stm32_mdma_get_width(chan, max_width);
+
+ max_burst = tlen / max_width;
+ best_burst = stm32_mdma_get_best_burst(len, tlen, max_burst,
+ max_width);
+ mdma_burst = ilog2(best_burst);
+
+ ctcr |= STM32_MDMA_CTCR_SBURST(mdma_burst) |
+ STM32_MDMA_CTCR_SSIZE(src_bus_width) |
+ STM32_MDMA_CTCR_SINCOS(src_bus_width);
+
+ /* Set destination best burst size */
+ max_width = stm32_mdma_get_max_width(dest, len, tlen);
+ dst_bus_width = stm32_mdma_get_width(chan, max_width);
+
+ max_burst = tlen / max_width;
+ best_burst = stm32_mdma_get_best_burst(len, tlen, max_burst,
+ max_width);
+ mdma_burst = ilog2(best_burst);
+
+ ctcr |= STM32_MDMA_CTCR_DBURST(mdma_burst) |
+ STM32_MDMA_CTCR_DSIZE(dst_bus_width) |
+ STM32_MDMA_CTCR_DINCOS(dst_bus_width);
+
+ if (dst_bus_width != src_bus_width)
+ ctcr |= STM32_MDMA_CTCR_PKE;
+
+ /* Prepare hardware descriptor */
+ hwdesc = desc->hwdesc;
+ hwdesc->ctcr = ctcr;
+ hwdesc->cbndtr = cbndtr;
+ hwdesc->csar = src;
+ hwdesc->cdar = dest;
+ hwdesc->cbrur = 0;
+ hwdesc->clar = 0;
+ hwdesc->ctbr = ctbr;
+ hwdesc->cmar = 0;
+ hwdesc->cmdr = 0;
+
+ stm32_mdma_dump_hwdesc(chan, hwdesc);
+ } else {
+ /* Setup a LLI transfer */
+ ctcr |= STM32_MDMA_CTCR_TRGM(STM32_MDMA_LINKED_LIST) |
+ STM32_MDMA_CTCR_TLEN((STM32_MDMA_MAX_BUF_LEN - 1));
+ ccr |= STM32_MDMA_CCR_BTIE | STM32_MDMA_CCR_CTCIE;
+ tlen = STM32_MDMA_MAX_BUF_LEN;
+
+ for (i = 0, offset = 0; offset < len;
+ i++, offset += xfer_count) {
+ xfer_count = min_t(size_t, len - offset,
+ STM32_MDMA_MAX_BLOCK_LEN);
+
+ /* Set source best burst size */
+ max_width = stm32_mdma_get_max_width(src, len, tlen);
+ src_bus_width = stm32_mdma_get_width(chan, max_width);
+
+ max_burst = tlen / max_width;
+ best_burst = stm32_mdma_get_best_burst(len, tlen,
+ max_burst,
+ max_width);
+ mdma_burst = ilog2(best_burst);
+
+ ctcr |= STM32_MDMA_CTCR_SBURST(mdma_burst) |
+ STM32_MDMA_CTCR_SSIZE(src_bus_width) |
+ STM32_MDMA_CTCR_SINCOS(src_bus_width);
+
+ /* Set destination best burst size */
+ max_width = stm32_mdma_get_max_width(dest, len, tlen);
+ dst_bus_width = stm32_mdma_get_width(chan, max_width);
+
+ max_burst = tlen / max_width;
+ best_burst = stm32_mdma_get_best_burst(len, tlen,
+ max_burst,
+ max_width);
+ mdma_burst = ilog2(best_burst);
+
+ ctcr |= STM32_MDMA_CTCR_DBURST(mdma_burst) |
+ STM32_MDMA_CTCR_DSIZE(dst_bus_width) |
+ STM32_MDMA_CTCR_DINCOS(dst_bus_width);
+
+ if (dst_bus_width != src_bus_width)
+ ctcr |= STM32_MDMA_CTCR_PKE;
+
+ /* Prepare hardware descriptor */
+ stm32_mdma_setup_hwdesc(chan, desc, DMA_MEM_TO_MEM, i,
+ src + offset, dest + offset,
+ xfer_count, ctcr, ctbr,
+ i == count - 1, i == 0, false);
+ }
+ }
+
+ desc->ccr = ccr;
+
+ desc->cyclic = false;
+
+ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags);
+}
+
+static void stm32_mdma_dump_reg(struct stm32_mdma_chan *chan)
+{
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+
+ dev_dbg(chan2dev(chan), "CCR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id)));
+ dev_dbg(chan2dev(chan), "CTCR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CTCR(chan->id)));
+ dev_dbg(chan2dev(chan), "CBNDTR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CBNDTR(chan->id)));
+ dev_dbg(chan2dev(chan), "CSAR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CSAR(chan->id)));
+ dev_dbg(chan2dev(chan), "CDAR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CDAR(chan->id)));
+ dev_dbg(chan2dev(chan), "CBRUR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CBRUR(chan->id)));
+ dev_dbg(chan2dev(chan), "CLAR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CLAR(chan->id)));
+ dev_dbg(chan2dev(chan), "CTBR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CTBR(chan->id)));
+ dev_dbg(chan2dev(chan), "CMAR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CMAR(chan->id)));
+ dev_dbg(chan2dev(chan), "CMDR: 0x%08x\n",
+ stm32_mdma_read(dmadev, STM32_MDMA_CMDR(chan->id)));
+}
+
+static void stm32_mdma_start_transfer(struct stm32_mdma_chan *chan)
+{
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ struct virt_dma_desc *vdesc;
+ struct stm32_mdma_hwdesc *hwdesc;
+ u32 id = chan->id;
+ u32 status, reg;
+
+ vdesc = vchan_next_desc(&chan->vchan);
+ if (!vdesc) {
+ chan->desc = NULL;
+ return;
+ }
+
+ chan->desc = to_stm32_mdma_desc(vdesc);
+ hwdesc = chan->desc->hwdesc;
+ chan->curr_hwdesc = 0;
+
+ stm32_mdma_write(dmadev, STM32_MDMA_CCR(id), chan->desc->ccr);
+ stm32_mdma_write(dmadev, STM32_MDMA_CTCR(id), hwdesc->ctcr);
+ stm32_mdma_write(dmadev, STM32_MDMA_CBNDTR(id), hwdesc->cbndtr);
+ stm32_mdma_write(dmadev, STM32_MDMA_CSAR(id), hwdesc->csar);
+ stm32_mdma_write(dmadev, STM32_MDMA_CDAR(id), hwdesc->cdar);
+ stm32_mdma_write(dmadev, STM32_MDMA_CBRUR(id), hwdesc->cbrur);
+ stm32_mdma_write(dmadev, STM32_MDMA_CLAR(id), hwdesc->clar);
+ stm32_mdma_write(dmadev, STM32_MDMA_CTBR(id), hwdesc->ctbr);
+ stm32_mdma_write(dmadev, STM32_MDMA_CMAR(id), hwdesc->cmar);
+ stm32_mdma_write(dmadev, STM32_MDMA_CMDR(id), hwdesc->cmdr);
+
+ /* Clear interrupt status if it is there */
+ status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(id));
+ if (status)
+ stm32_mdma_set_bits(dmadev, STM32_MDMA_CIFCR(id), status);
+
+ stm32_mdma_dump_reg(chan);
+
+ /* Start DMA */
+ stm32_mdma_set_bits(dmadev, STM32_MDMA_CCR(id), STM32_MDMA_CCR_EN);
+
+ /* Set SW request in case of MEM2MEM transfer */
+ if (hwdesc->ctcr & STM32_MDMA_CTCR_SWRM) {
+ reg = STM32_MDMA_CCR(id);
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CCR_SWRQ);
+ }
+
+ chan->busy = true;
+
+ dev_dbg(chan2dev(chan), "vchan %p: started\n", &chan->vchan);
+}
+
+static void stm32_mdma_issue_pending(struct dma_chan *c)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+
+ if (!vchan_issue_pending(&chan->vchan))
+ goto end;
+
+ dev_dbg(chan2dev(chan), "vchan %p: issued\n", &chan->vchan);
+
+ if (!chan->desc && !chan->busy)
+ stm32_mdma_start_transfer(chan);
+
+end:
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+}
+
+static int stm32_mdma_pause(struct dma_chan *c)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+ ret = stm32_mdma_disable_chan(chan);
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+
+ if (!ret)
+ dev_dbg(chan2dev(chan), "vchan %p: pause\n", &chan->vchan);
+
+ return ret;
+}
+
+static int stm32_mdma_resume(struct dma_chan *c)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ struct stm32_mdma_hwdesc *hwdesc;
+ unsigned long flags;
+ u32 status, reg;
+
+ hwdesc = &chan->desc->hwdesc[chan->curr_hwdesc];
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+
+ /* Re-configure control register */
+ stm32_mdma_write(dmadev, STM32_MDMA_CCR(chan->id), chan->desc->ccr);
+
+ /* Clear interrupt status if it is there */
+ status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(chan->id));
+ if (status)
+ stm32_mdma_set_bits(dmadev, STM32_MDMA_CIFCR(chan->id), status);
+
+ stm32_mdma_dump_reg(chan);
+
+ /* Re-start DMA */
+ reg = STM32_MDMA_CCR(chan->id);
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CCR_EN);
+
+ /* Set SW request in case of MEM2MEM transfer */
+ if (hwdesc->ctcr & STM32_MDMA_CTCR_SWRM)
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CCR_SWRQ);
+
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+
+ dev_dbg(chan2dev(chan), "vchan %p: resume\n", &chan->vchan);
+
+ return 0;
+}
+
+static int stm32_mdma_terminate_all(struct dma_chan *c)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ unsigned long flags;
+ LIST_HEAD(head);
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+ if (chan->busy) {
+ stm32_mdma_stop(chan);
+ chan->desc = NULL;
+ }
+ vchan_get_all_descriptors(&chan->vchan, &head);
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+
+ vchan_dma_desc_free_list(&chan->vchan, &head);
+
+ return 0;
+}
+
+static void stm32_mdma_synchronize(struct dma_chan *c)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+
+ vchan_synchronize(&chan->vchan);
+}
+
+static int stm32_mdma_slave_config(struct dma_chan *c,
+ struct dma_slave_config *config)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+
+ memcpy(&chan->dma_config, config, sizeof(*config));
+
+ return 0;
+}
+
+static size_t stm32_mdma_desc_residue(struct stm32_mdma_chan *chan,
+ struct stm32_mdma_desc *desc,
+ u32 curr_hwdesc)
+{
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ u32 cbndtr, residue, modulo, burst_size;
+ int i;
+
+ residue = 0;
+ for (i = curr_hwdesc + 1; i < desc->count; i++) {
+ struct stm32_mdma_hwdesc *hwdesc = &desc->hwdesc[i];
+
+ residue += STM32_MDMA_CBNDTR_BNDT(hwdesc->cbndtr);
+ }
+ cbndtr = stm32_mdma_read(dmadev, STM32_MDMA_CBNDTR(chan->id));
+ residue += cbndtr & STM32_MDMA_CBNDTR_BNDT_MASK;
+
+ if (!chan->mem_burst)
+ return residue;
+
+ burst_size = chan->mem_burst * chan->mem_width;
+ modulo = residue % burst_size;
+ if (modulo)
+ residue = residue - modulo + burst_size;
+
+ return residue;
+}
+
+static enum dma_status stm32_mdma_tx_status(struct dma_chan *c,
+ dma_cookie_t cookie,
+ struct dma_tx_state *state)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ struct virt_dma_desc *vdesc;
+ enum dma_status status;
+ unsigned long flags;
+ u32 residue = 0;
+
+ status = dma_cookie_status(c, cookie, state);
+ if ((status == DMA_COMPLETE) || (!state))
+ return status;
+
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+
+ vdesc = vchan_find_desc(&chan->vchan, cookie);
+ if (chan->desc && cookie == chan->desc->vdesc.tx.cookie)
+ residue = stm32_mdma_desc_residue(chan, chan->desc,
+ chan->curr_hwdesc);
+ else if (vdesc)
+ residue = stm32_mdma_desc_residue(chan,
+ to_stm32_mdma_desc(vdesc), 0);
+ dma_set_residue(state, residue);
+
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+
+ return status;
+}
+
+static void stm32_mdma_xfer_end(struct stm32_mdma_chan *chan)
+{
+ list_del(&chan->desc->vdesc.node);
+ vchan_cookie_complete(&chan->desc->vdesc);
+ chan->desc = NULL;
+ chan->busy = false;
+
+ /* Start the next transfer if this driver has a next desc */
+ stm32_mdma_start_transfer(chan);
+}
+
+static irqreturn_t stm32_mdma_irq_handler(int irq, void *devid)
+{
+ struct stm32_mdma_device *dmadev = devid;
+ struct stm32_mdma_chan *chan = devid;
+ u32 reg, id, ien, status, flag;
+
+ /* Find out which channel generates the interrupt */
+ status = readl_relaxed(dmadev->base + STM32_MDMA_GISR0);
+ if (status) {
+ id = __ffs(status);
+ } else {
+ status = readl_relaxed(dmadev->base + STM32_MDMA_GISR1);
+ if (!status) {
+ dev_dbg(mdma2dev(dmadev), "spurious it\n");
+ return IRQ_NONE;
+ }
+ id = __ffs(status);
+ /*
+ * As GISR0 provides status for channel id from 0 to 31,
+ * so GISR1 provides status for channel id from 32 to 62
+ */
+ id += 32;
+ }
+
+ chan = &dmadev->chan[id];
+ if (!chan) {
+ dev_err(chan2dev(chan), "MDMA channel not initialized\n");
+ goto exit;
+ }
+
+ /* Handle interrupt for the channel */
+ spin_lock(&chan->vchan.lock);
+ status = stm32_mdma_read(dmadev, STM32_MDMA_CISR(chan->id));
+ ien = stm32_mdma_read(dmadev, STM32_MDMA_CCR(chan->id));
+ ien &= STM32_MDMA_CCR_IRQ_MASK;
+ ien >>= 1;
+
+ if (!(status & ien)) {
+ spin_unlock(&chan->vchan.lock);
+ dev_dbg(chan2dev(chan),
+ "spurious it (status=0x%04x, ien=0x%04x)\n",
+ status, ien);
+ return IRQ_NONE;
+ }
+
+ flag = __ffs(status & ien);
+ reg = STM32_MDMA_CIFCR(chan->id);
+
+ switch (1 << flag) {
+ case STM32_MDMA_CISR_TEIF:
+ id = chan->id;
+ status = readl_relaxed(dmadev->base + STM32_MDMA_CESR(id));
+ dev_err(chan2dev(chan), "Transfer Err: stat=0x%08x\n", status);
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CTEIF);
+ break;
+
+ case STM32_MDMA_CISR_CTCIF:
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CCTCIF);
+ stm32_mdma_xfer_end(chan);
+ break;
+
+ case STM32_MDMA_CISR_BRTIF:
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CBRTIF);
+ break;
+
+ case STM32_MDMA_CISR_BTIF:
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CBTIF);
+ chan->curr_hwdesc++;
+ if (chan->desc && chan->desc->cyclic) {
+ if (chan->curr_hwdesc == chan->desc->count)
+ chan->curr_hwdesc = 0;
+ vchan_cyclic_callback(&chan->desc->vdesc);
+ }
+ break;
+
+ case STM32_MDMA_CISR_TCIF:
+ stm32_mdma_set_bits(dmadev, reg, STM32_MDMA_CIFCR_CLTCIF);
+ break;
+
+ default:
+ dev_err(chan2dev(chan), "it %d unhandled (status=0x%04x)\n",
+ 1 << flag, status);
+ }
+
+ spin_unlock(&chan->vchan.lock);
+
+exit:
+ return IRQ_HANDLED;
+}
+
+static int stm32_mdma_alloc_chan_resources(struct dma_chan *c)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ int ret;
+
+ chan->desc_pool = dmam_pool_create(dev_name(&c->dev->device),
+ c->device->dev,
+ sizeof(struct stm32_mdma_hwdesc),
+ __alignof__(struct stm32_mdma_hwdesc),
+ 0);
+ if (!chan->desc_pool) {
+ dev_err(chan2dev(chan), "failed to allocate descriptor pool\n");
+ return -ENOMEM;
+ }
+
+ ret = clk_prepare_enable(dmadev->clk);
+ if (ret < 0) {
+ dev_err(chan2dev(chan), "clk_prepare_enable failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = stm32_mdma_disable_chan(chan);
+ if (ret < 0)
+ clk_disable_unprepare(dmadev->clk);
+
+ return ret;
+}
+
+static void stm32_mdma_free_chan_resources(struct dma_chan *c)
+{
+ struct stm32_mdma_chan *chan = to_stm32_mdma_chan(c);
+ struct stm32_mdma_device *dmadev = stm32_mdma_get_dev(chan);
+ unsigned long flags;
+
+ dev_dbg(chan2dev(chan), "Freeing channel %d\n", chan->id);
+
+ if (chan->busy) {
+ spin_lock_irqsave(&chan->vchan.lock, flags);
+ stm32_mdma_stop(chan);
+ chan->desc = NULL;
+ spin_unlock_irqrestore(&chan->vchan.lock, flags);
+ }
+
+ clk_disable_unprepare(dmadev->clk);
+ vchan_free_chan_resources(to_virt_chan(c));
+ dmam_pool_destroy(chan->desc_pool);
+ chan->desc_pool = NULL;
+}
+
+static struct dma_chan *stm32_mdma_of_xlate(struct of_phandle_args *dma_spec,
+ struct of_dma *ofdma)
+{
+ struct stm32_mdma_device *dmadev = ofdma->of_dma_data;
+ struct stm32_mdma_chan *chan;
+ struct dma_chan *c;
+ struct stm32_mdma_chan_config config;
+
+ if (dma_spec->args_count < 5) {
+ dev_err(mdma2dev(dmadev), "Bad number of args\n");
+ return NULL;
+ }
+
+ config.request = dma_spec->args[0];
+ config.priority_level = dma_spec->args[1];
+ config.transfer_config = dma_spec->args[2];
+ config.mask_addr = dma_spec->args[3];
+ config.mask_data = dma_spec->args[4];
+
+ if (config.request >= dmadev->nr_requests) {
+ dev_err(mdma2dev(dmadev), "Bad request line\n");
+ return NULL;
+ }
+
+ if (config.priority_level > STM32_MDMA_VERY_HIGH_PRIORITY) {
+ dev_err(mdma2dev(dmadev), "Priority level not supported\n");
+ return NULL;
+ }
+
+ c = dma_get_any_slave_channel(&dmadev->ddev);
+ if (!c) {
+ dev_err(mdma2dev(dmadev), "No more channel avalaible\n");
+ return NULL;
+ }
+
+ chan = to_stm32_mdma_chan(c);
+ chan->chan_config = config;
+
+ return c;
+}
+
+static const struct of_device_id stm32_mdma_of_match[] = {
+ { .compatible = "st,stm32h7-mdma", },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, stm32_mdma_of_match);
+
+static int stm32_mdma_probe(struct platform_device *pdev)
+{
+ struct stm32_mdma_chan *chan;
+ struct stm32_mdma_device *dmadev;
+ struct dma_device *dd;
+ struct device_node *of_node;
+ struct resource *res;
+ u32 nr_channels, nr_requests;
+ int i, count, ret;
+
+ of_node = pdev->dev.of_node;
+ if (!of_node)
+ return -ENODEV;
+
+ ret = device_property_read_u32(&pdev->dev, "dma-channels",
+ &nr_channels);
+ if (ret) {
+ nr_channels = STM32_MDMA_MAX_CHANNELS;
+ dev_warn(&pdev->dev, "MDMA defaulting on %i channels\n",
+ nr_channels);
+ }
+
+ ret = device_property_read_u32(&pdev->dev, "dma-requests",
+ &nr_requests);
+ if (ret) {
+ nr_requests = STM32_MDMA_MAX_REQUESTS;
+ dev_warn(&pdev->dev, "MDMA defaulting on %i request lines\n",
+ nr_requests);
+ }
+
+ count = device_property_read_u32_array(&pdev->dev, "st,ahb-addr-masks",
+ NULL, 0);
+ if (count < 0)
+ count = 0;
+
+ dmadev = devm_kzalloc(&pdev->dev, sizeof(*dmadev) + sizeof(u32) * count,
+ GFP_KERNEL);
+ if (!dmadev)
+ return -ENOMEM;
+
+ dmadev->nr_channels = nr_channels;
+ dmadev->nr_requests = nr_requests;
+ device_property_read_u32_array(&pdev->dev, "st,ahb-addr-masks",
+ dmadev->ahb_addr_masks,
+ count);
+ dmadev->nr_ahb_addr_masks = count;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dmadev->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dmadev->base))
+ return PTR_ERR(dmadev->base);
+
+ dmadev->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dmadev->clk)) {
+ ret = PTR_ERR(dmadev->clk);
+ if (ret == -EPROBE_DEFER)
+ dev_info(&pdev->dev, "Missing controller clock\n");
+ return ret;
+ }
+
+ dmadev->rst = devm_reset_control_get(&pdev->dev, NULL);
+ if (!IS_ERR(dmadev->rst)) {
+ reset_control_assert(dmadev->rst);
+ udelay(2);
+ reset_control_deassert(dmadev->rst);
+ }
+
+ dd = &dmadev->ddev;
+ dma_cap_set(DMA_SLAVE, dd->cap_mask);
+ dma_cap_set(DMA_PRIVATE, dd->cap_mask);
+ dma_cap_set(DMA_CYCLIC, dd->cap_mask);
+ dma_cap_set(DMA_MEMCPY, dd->cap_mask);
+ dd->device_alloc_chan_resources = stm32_mdma_alloc_chan_resources;
+ dd->device_free_chan_resources = stm32_mdma_free_chan_resources;
+ dd->device_tx_status = stm32_mdma_tx_status;
+ dd->device_issue_pending = stm32_mdma_issue_pending;
+ dd->device_prep_slave_sg = stm32_mdma_prep_slave_sg;
+ dd->device_prep_dma_cyclic = stm32_mdma_prep_dma_cyclic;
+ dd->device_prep_dma_memcpy = stm32_mdma_prep_dma_memcpy;
+ dd->device_config = stm32_mdma_slave_config;
+ dd->device_pause = stm32_mdma_pause;
+ dd->device_resume = stm32_mdma_resume;
+ dd->device_terminate_all = stm32_mdma_terminate_all;
+ dd->device_synchronize = stm32_mdma_synchronize;
+ dd->src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+ dd->dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES);
+ dd->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV) |
+ BIT(DMA_MEM_TO_MEM);
+ dd->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
+ dd->max_burst = STM32_MDMA_MAX_BURST;
+ dd->dev = &pdev->dev;
+ INIT_LIST_HEAD(&dd->channels);
+
+ for (i = 0; i < dmadev->nr_channels; i++) {
+ chan = &dmadev->chan[i];
+ chan->id = i;
+ chan->vchan.desc_free = stm32_mdma_desc_free;
+ vchan_init(&chan->vchan, dd);
+ }
+
+ dmadev->irq = platform_get_irq(pdev, 0);
+ if (dmadev->irq < 0) {
+ dev_err(&pdev->dev, "failed to get IRQ\n");
+ return dmadev->irq;
+ }
+
+ ret = devm_request_irq(&pdev->dev, dmadev->irq, stm32_mdma_irq_handler,
+ 0, dev_name(&pdev->dev), dmadev);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ return ret;
+ }
+
+ ret = dma_async_device_register(dd);
+ if (ret)
+ return ret;
+
+ ret = of_dma_controller_register(of_node, stm32_mdma_of_xlate, dmadev);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "STM32 MDMA DMA OF registration failed %d\n", ret);
+ goto err_unregister;
+ }
+
+ platform_set_drvdata(pdev, dmadev);
+
+ dev_info(&pdev->dev, "STM32 MDMA driver registered\n");
+
+ return 0;
+
+err_unregister:
+ dma_async_device_unregister(dd);
+
+ return ret;
+}
+
+static struct platform_driver stm32_mdma_driver = {
+ .probe = stm32_mdma_probe,
+ .driver = {
+ .name = "stm32-mdma",
+ .of_match_table = stm32_mdma_of_match,
+ },
+};
+
+static int __init stm32_mdma_init(void)
+{
+ return platform_driver_register(&stm32_mdma_driver);
+}
+
+subsys_initcall(stm32_mdma_init);
+
+MODULE_DESCRIPTION("Driver for STM32 MDMA controller");
+MODULE_AUTHOR("M'boumba Cedric Madianga <cedric.madianga@gmail.com>");
+MODULE_AUTHOR("Pierre-Yves Mordret <pierre-yves.mordret@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
index bcd496edc70f..0cd13f17fc11 100644
--- a/drivers/dma/sun6i-dma.c
+++ b/drivers/dma/sun6i-dma.c
@@ -42,12 +42,18 @@
#define DMA_STAT 0x30
+/* Offset between DMA_IRQ_EN and DMA_IRQ_STAT limits number of channels */
+#define DMA_MAX_CHANNELS (DMA_IRQ_CHAN_NR * 0x10 / 4)
+
/*
* sun8i specific registers
*/
#define SUN8I_DMA_GATE 0x20
#define SUN8I_DMA_GATE_ENABLE 0x4
+#define SUNXI_H3_SECURE_REG 0x20
+#define SUNXI_H3_DMA_GATE 0x28
+#define SUNXI_H3_DMA_GATE_ENABLE 0x4
/*
* Channels specific registers
*/
@@ -62,16 +68,19 @@
#define DMA_CHAN_LLI_ADDR 0x08
#define DMA_CHAN_CUR_CFG 0x0c
-#define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & 0x1f)
+#define DMA_CHAN_MAX_DRQ 0x1f
+#define DMA_CHAN_CFG_SRC_DRQ(x) ((x) & DMA_CHAN_MAX_DRQ)
#define DMA_CHAN_CFG_SRC_IO_MODE BIT(5)
#define DMA_CHAN_CFG_SRC_LINEAR_MODE (0 << 5)
-#define DMA_CHAN_CFG_SRC_BURST(x) (((x) & 0x3) << 7)
+#define DMA_CHAN_CFG_SRC_BURST_A31(x) (((x) & 0x3) << 7)
+#define DMA_CHAN_CFG_SRC_BURST_H3(x) (((x) & 0x3) << 6)
#define DMA_CHAN_CFG_SRC_WIDTH(x) (((x) & 0x3) << 9)
#define DMA_CHAN_CFG_DST_DRQ(x) (DMA_CHAN_CFG_SRC_DRQ(x) << 16)
#define DMA_CHAN_CFG_DST_IO_MODE (DMA_CHAN_CFG_SRC_IO_MODE << 16)
#define DMA_CHAN_CFG_DST_LINEAR_MODE (DMA_CHAN_CFG_SRC_LINEAR_MODE << 16)
-#define DMA_CHAN_CFG_DST_BURST(x) (DMA_CHAN_CFG_SRC_BURST(x) << 16)
+#define DMA_CHAN_CFG_DST_BURST_A31(x) (DMA_CHAN_CFG_SRC_BURST_A31(x) << 16)
+#define DMA_CHAN_CFG_DST_BURST_H3(x) (DMA_CHAN_CFG_SRC_BURST_H3(x) << 16)
#define DMA_CHAN_CFG_DST_WIDTH(x) (DMA_CHAN_CFG_SRC_WIDTH(x) << 16)
#define DMA_CHAN_CUR_SRC 0x10
@@ -90,6 +99,9 @@
#define NORMAL_WAIT 8
#define DRQ_SDRAM 1
+/* forward declaration */
+struct sun6i_dma_dev;
+
/*
* Hardware channels / ports representation
*
@@ -111,7 +123,12 @@ struct sun6i_dma_config {
* however these SoCs really have and need this bit, as seen in the
* BSP kernel source code.
*/
- bool gate_needed;
+ void (*clock_autogate_enable)(struct sun6i_dma_dev *);
+ void (*set_burst_length)(u32 *p_cfg, s8 src_burst, s8 dst_burst);
+ u32 src_burst_lengths;
+ u32 dst_burst_lengths;
+ u32 src_addr_widths;
+ u32 dst_addr_widths;
};
/*
@@ -175,6 +192,9 @@ struct sun6i_dma_dev {
struct sun6i_pchan *pchans;
struct sun6i_vchan *vchans;
const struct sun6i_dma_config *cfg;
+ u32 num_pchans;
+ u32 num_vchans;
+ u32 max_request;
};
static struct device *chan2dev(struct dma_chan *chan)
@@ -251,8 +271,12 @@ static inline s8 convert_burst(u32 maxburst)
switch (maxburst) {
case 1:
return 0;
+ case 4:
+ return 1;
case 8:
return 2;
+ case 16:
+ return 3;
default:
return -EINVAL;
}
@@ -260,11 +284,29 @@ static inline s8 convert_burst(u32 maxburst)
static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
{
- if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) ||
- (addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
- return -EINVAL;
+ return ilog2(addr_width);
+}
+
+static void sun6i_enable_clock_autogate_a23(struct sun6i_dma_dev *sdev)
+{
+ writel(SUN8I_DMA_GATE_ENABLE, sdev->base + SUN8I_DMA_GATE);
+}
+
+static void sun6i_enable_clock_autogate_h3(struct sun6i_dma_dev *sdev)
+{
+ writel(SUNXI_H3_DMA_GATE_ENABLE, sdev->base + SUNXI_H3_DMA_GATE);
+}
- return addr_width >> 1;
+static void sun6i_set_burst_length_a31(u32 *p_cfg, s8 src_burst, s8 dst_burst)
+{
+ *p_cfg |= DMA_CHAN_CFG_SRC_BURST_A31(src_burst) |
+ DMA_CHAN_CFG_DST_BURST_A31(dst_burst);
+}
+
+static void sun6i_set_burst_length_h3(u32 *p_cfg, s8 src_burst, s8 dst_burst)
+{
+ *p_cfg |= DMA_CHAN_CFG_SRC_BURST_H3(src_burst) |
+ DMA_CHAN_CFG_DST_BURST_H3(dst_burst);
}
static size_t sun6i_get_chan_size(struct sun6i_pchan *pchan)
@@ -399,7 +441,6 @@ static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
static void sun6i_dma_tasklet(unsigned long data)
{
struct sun6i_dma_dev *sdev = (struct sun6i_dma_dev *)data;
- const struct sun6i_dma_config *cfg = sdev->cfg;
struct sun6i_vchan *vchan;
struct sun6i_pchan *pchan;
unsigned int pchan_alloc = 0;
@@ -427,7 +468,7 @@ static void sun6i_dma_tasklet(unsigned long data)
}
spin_lock_irq(&sdev->lock);
- for (pchan_idx = 0; pchan_idx < cfg->nr_max_channels; pchan_idx++) {
+ for (pchan_idx = 0; pchan_idx < sdev->num_pchans; pchan_idx++) {
pchan = &sdev->pchans[pchan_idx];
if (pchan->vchan || list_empty(&sdev->pending))
@@ -448,7 +489,7 @@ static void sun6i_dma_tasklet(unsigned long data)
}
spin_unlock_irq(&sdev->lock);
- for (pchan_idx = 0; pchan_idx < cfg->nr_max_channels; pchan_idx++) {
+ for (pchan_idx = 0; pchan_idx < sdev->num_pchans; pchan_idx++) {
if (!(pchan_alloc & BIT(pchan_idx)))
continue;
@@ -470,7 +511,7 @@ static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
int i, j, ret = IRQ_NONE;
u32 status;
- for (i = 0; i < sdev->cfg->nr_max_channels / DMA_IRQ_CHAN_NR; i++) {
+ for (i = 0; i < sdev->num_pchans / DMA_IRQ_CHAN_NR; i++) {
status = readl(sdev->base + DMA_IRQ_STAT(i));
if (!status)
continue;
@@ -510,47 +551,49 @@ static int set_config(struct sun6i_dma_dev *sdev,
enum dma_transfer_direction direction,
u32 *p_cfg)
{
+ enum dma_slave_buswidth src_addr_width, dst_addr_width;
+ u32 src_maxburst, dst_maxburst;
s8 src_width, dst_width, src_burst, dst_burst;
+ src_addr_width = sconfig->src_addr_width;
+ dst_addr_width = sconfig->dst_addr_width;
+ src_maxburst = sconfig->src_maxburst;
+ dst_maxburst = sconfig->dst_maxburst;
+
switch (direction) {
case DMA_MEM_TO_DEV:
- src_burst = convert_burst(sconfig->src_maxburst ?
- sconfig->src_maxburst : 8);
- src_width = convert_buswidth(sconfig->src_addr_width !=
- DMA_SLAVE_BUSWIDTH_UNDEFINED ?
- sconfig->src_addr_width :
- DMA_SLAVE_BUSWIDTH_4_BYTES);
- dst_burst = convert_burst(sconfig->dst_maxburst);
- dst_width = convert_buswidth(sconfig->dst_addr_width);
+ if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
+ src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ src_maxburst = src_maxburst ? src_maxburst : 8;
break;
case DMA_DEV_TO_MEM:
- src_burst = convert_burst(sconfig->src_maxburst);
- src_width = convert_buswidth(sconfig->src_addr_width);
- dst_burst = convert_burst(sconfig->dst_maxburst ?
- sconfig->dst_maxburst : 8);
- dst_width = convert_buswidth(sconfig->dst_addr_width !=
- DMA_SLAVE_BUSWIDTH_UNDEFINED ?
- sconfig->dst_addr_width :
- DMA_SLAVE_BUSWIDTH_4_BYTES);
+ if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
+ dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ dst_maxburst = dst_maxburst ? dst_maxburst : 8;
break;
default:
return -EINVAL;
}
- if (src_burst < 0)
- return src_burst;
- if (src_width < 0)
- return src_width;
- if (dst_burst < 0)
- return dst_burst;
- if (dst_width < 0)
- return dst_width;
-
- *p_cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
- DMA_CHAN_CFG_SRC_WIDTH(src_width) |
- DMA_CHAN_CFG_DST_BURST(dst_burst) |
+ if (!(BIT(src_addr_width) & sdev->slave.src_addr_widths))
+ return -EINVAL;
+ if (!(BIT(dst_addr_width) & sdev->slave.dst_addr_widths))
+ return -EINVAL;
+ if (!(BIT(src_maxburst) & sdev->cfg->src_burst_lengths))
+ return -EINVAL;
+ if (!(BIT(dst_maxburst) & sdev->cfg->dst_burst_lengths))
+ return -EINVAL;
+
+ src_width = convert_buswidth(src_addr_width);
+ dst_width = convert_buswidth(dst_addr_width);
+ dst_burst = convert_burst(dst_maxburst);
+ src_burst = convert_burst(src_maxburst);
+
+ *p_cfg = DMA_CHAN_CFG_SRC_WIDTH(src_width) |
DMA_CHAN_CFG_DST_WIDTH(dst_width);
+ sdev->cfg->set_burst_length(p_cfg, src_burst, dst_burst);
+
return 0;
}
@@ -593,11 +636,11 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_LINEAR_MODE |
DMA_CHAN_CFG_SRC_LINEAR_MODE |
- DMA_CHAN_CFG_SRC_BURST(burst) |
DMA_CHAN_CFG_SRC_WIDTH(width) |
- DMA_CHAN_CFG_DST_BURST(burst) |
DMA_CHAN_CFG_DST_WIDTH(width);
+ sdev->cfg->set_burst_length(&v_lli->cfg, burst, burst);
+
sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
sun6i_dma_dump_lli(vchan, v_lli);
@@ -948,7 +991,7 @@ static struct dma_chan *sun6i_dma_of_xlate(struct of_phandle_args *dma_spec,
struct dma_chan *chan;
u8 port = dma_spec->args[0];
- if (port > sdev->cfg->nr_max_requests)
+ if (port > sdev->max_request)
return NULL;
chan = dma_get_any_slave_channel(&sdev->slave);
@@ -981,7 +1024,7 @@ static inline void sun6i_dma_free(struct sun6i_dma_dev *sdev)
{
int i;
- for (i = 0; i < sdev->cfg->nr_max_vchans; i++) {
+ for (i = 0; i < sdev->num_vchans; i++) {
struct sun6i_vchan *vchan = &sdev->vchans[i];
list_del(&vchan->vc.chan.device_node);
@@ -1009,6 +1052,15 @@ static struct sun6i_dma_config sun6i_a31_dma_cfg = {
.nr_max_channels = 16,
.nr_max_requests = 30,
.nr_max_vchans = 53,
+ .set_burst_length = sun6i_set_burst_length_a31,
+ .src_burst_lengths = BIT(1) | BIT(8),
+ .dst_burst_lengths = BIT(1) | BIT(8),
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
};
/*
@@ -1020,24 +1072,76 @@ static struct sun6i_dma_config sun8i_a23_dma_cfg = {
.nr_max_channels = 8,
.nr_max_requests = 24,
.nr_max_vchans = 37,
- .gate_needed = true,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_a23,
+ .set_burst_length = sun6i_set_burst_length_a31,
+ .src_burst_lengths = BIT(1) | BIT(8),
+ .dst_burst_lengths = BIT(1) | BIT(8),
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
};
static struct sun6i_dma_config sun8i_a83t_dma_cfg = {
.nr_max_channels = 8,
.nr_max_requests = 28,
.nr_max_vchans = 39,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_a23,
+ .set_burst_length = sun6i_set_burst_length_a31,
+ .src_burst_lengths = BIT(1) | BIT(8),
+ .dst_burst_lengths = BIT(1) | BIT(8),
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
};
/*
* The H3 has 12 physical channels, a maximum DRQ port id of 27,
* and a total of 34 usable source and destination endpoints.
+ * It also supports additional burst lengths and bus widths,
+ * and the burst length fields have different offsets.
*/
static struct sun6i_dma_config sun8i_h3_dma_cfg = {
.nr_max_channels = 12,
.nr_max_requests = 27,
.nr_max_vchans = 34,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_h3,
+ .set_burst_length = sun6i_set_burst_length_h3,
+ .src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+ .dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+};
+
+/*
+ * The A64 binding uses the number of dma channels from the
+ * device tree node.
+ */
+static struct sun6i_dma_config sun50i_a64_dma_cfg = {
+ .clock_autogate_enable = sun6i_enable_clock_autogate_h3,
+ .set_burst_length = sun6i_set_burst_length_h3,
+ .src_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+ .dst_burst_lengths = BIT(1) | BIT(4) | BIT(8) | BIT(16),
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_8_BYTES),
};
/*
@@ -1049,7 +1153,16 @@ static struct sun6i_dma_config sun8i_v3s_dma_cfg = {
.nr_max_channels = 8,
.nr_max_requests = 23,
.nr_max_vchans = 24,
- .gate_needed = true,
+ .clock_autogate_enable = sun6i_enable_clock_autogate_a23,
+ .set_burst_length = sun6i_set_burst_length_a31,
+ .src_burst_lengths = BIT(1) | BIT(8),
+ .dst_burst_lengths = BIT(1) | BIT(8),
+ .src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
+ .dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
+ BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
+ BIT(DMA_SLAVE_BUSWIDTH_4_BYTES),
};
static const struct of_device_id sun6i_dma_match[] = {
@@ -1058,13 +1171,14 @@ static const struct of_device_id sun6i_dma_match[] = {
{ .compatible = "allwinner,sun8i-a83t-dma", .data = &sun8i_a83t_dma_cfg },
{ .compatible = "allwinner,sun8i-h3-dma", .data = &sun8i_h3_dma_cfg },
{ .compatible = "allwinner,sun8i-v3s-dma", .data = &sun8i_v3s_dma_cfg },
+ { .compatible = "allwinner,sun50i-a64-dma", .data = &sun50i_a64_dma_cfg },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, sun6i_dma_match);
static int sun6i_dma_probe(struct platform_device *pdev)
{
- const struct of_device_id *device;
+ struct device_node *np = pdev->dev.of_node;
struct sun6i_dma_dev *sdc;
struct resource *res;
int ret, i;
@@ -1073,10 +1187,9 @@ static int sun6i_dma_probe(struct platform_device *pdev)
if (!sdc)
return -ENOMEM;
- device = of_match_device(sun6i_dma_match, &pdev->dev);
- if (!device)
+ sdc->cfg = of_device_get_match_data(&pdev->dev);
+ if (!sdc->cfg)
return -ENODEV;
- sdc->cfg = device->data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sdc->base = devm_ioremap_resource(&pdev->dev, res);
@@ -1129,37 +1242,57 @@ static int sun6i_dma_probe(struct platform_device *pdev)
sdc->slave.device_pause = sun6i_dma_pause;
sdc->slave.device_resume = sun6i_dma_resume;
sdc->slave.device_terminate_all = sun6i_dma_terminate_all;
- sdc->slave.src_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
- BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
- BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
- sdc->slave.dst_addr_widths = BIT(DMA_SLAVE_BUSWIDTH_1_BYTE) |
- BIT(DMA_SLAVE_BUSWIDTH_2_BYTES) |
- BIT(DMA_SLAVE_BUSWIDTH_4_BYTES);
+ sdc->slave.src_addr_widths = sdc->cfg->src_addr_widths;
+ sdc->slave.dst_addr_widths = sdc->cfg->dst_addr_widths;
sdc->slave.directions = BIT(DMA_DEV_TO_MEM) |
BIT(DMA_MEM_TO_DEV);
sdc->slave.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
sdc->slave.dev = &pdev->dev;
- sdc->pchans = devm_kcalloc(&pdev->dev, sdc->cfg->nr_max_channels,
+ sdc->num_pchans = sdc->cfg->nr_max_channels;
+ sdc->num_vchans = sdc->cfg->nr_max_vchans;
+ sdc->max_request = sdc->cfg->nr_max_requests;
+
+ ret = of_property_read_u32(np, "dma-channels", &sdc->num_pchans);
+ if (ret && !sdc->num_pchans) {
+ dev_err(&pdev->dev, "Can't get dma-channels.\n");
+ return ret;
+ }
+
+ ret = of_property_read_u32(np, "dma-requests", &sdc->max_request);
+ if (ret && !sdc->max_request) {
+ dev_info(&pdev->dev, "Missing dma-requests, using %u.\n",
+ DMA_CHAN_MAX_DRQ);
+ sdc->max_request = DMA_CHAN_MAX_DRQ;
+ }
+
+ /*
+ * If the number of vchans is not specified, derive it from the
+ * highest port number, at most one channel per port and direction.
+ */
+ if (!sdc->num_vchans)
+ sdc->num_vchans = 2 * (sdc->max_request + 1);
+
+ sdc->pchans = devm_kcalloc(&pdev->dev, sdc->num_pchans,
sizeof(struct sun6i_pchan), GFP_KERNEL);
if (!sdc->pchans)
return -ENOMEM;
- sdc->vchans = devm_kcalloc(&pdev->dev, sdc->cfg->nr_max_vchans,
+ sdc->vchans = devm_kcalloc(&pdev->dev, sdc->num_vchans,
sizeof(struct sun6i_vchan), GFP_KERNEL);
if (!sdc->vchans)
return -ENOMEM;
tasklet_init(&sdc->task, sun6i_dma_tasklet, (unsigned long)sdc);
- for (i = 0; i < sdc->cfg->nr_max_channels; i++) {
+ for (i = 0; i < sdc->num_pchans; i++) {
struct sun6i_pchan *pchan = &sdc->pchans[i];
pchan->idx = i;
pchan->base = sdc->base + 0x100 + i * 0x40;
}
- for (i = 0; i < sdc->cfg->nr_max_vchans; i++) {
+ for (i = 0; i < sdc->num_vchans; i++) {
struct sun6i_vchan *vchan = &sdc->vchans[i];
INIT_LIST_HEAD(&vchan->node);
@@ -1199,8 +1332,8 @@ static int sun6i_dma_probe(struct platform_device *pdev)
goto err_dma_unregister;
}
- if (sdc->cfg->gate_needed)
- writel(SUN8I_DMA_GATE_ENABLE, sdc->base + SUN8I_DMA_GATE);
+ if (sdc->cfg->clock_autogate_enable)
+ sdc->cfg->clock_autogate_enable(sdc);
return 0;
diff --git a/drivers/dma/ti-dma-crossbar.c b/drivers/dma/ti-dma-crossbar.c
index f1d04b70ee67..7df910e7c348 100644
--- a/drivers/dma/ti-dma-crossbar.c
+++ b/drivers/dma/ti-dma-crossbar.c
@@ -49,12 +49,12 @@ struct ti_am335x_xbar_data {
struct ti_am335x_xbar_map {
u16 dma_line;
- u16 mux_val;
+ u8 mux_val;
};
-static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u16 val)
+static inline void ti_am335x_xbar_write(void __iomem *iomem, int event, u8 val)
{
- writeb_relaxed(val & 0x1f, iomem + event);
+ writeb_relaxed(val, iomem + event);
}
static void ti_am335x_xbar_free(struct device *dev, void *route_data)
@@ -105,7 +105,7 @@ static void *ti_am335x_xbar_route_allocate(struct of_phandle_args *dma_spec,
}
map->dma_line = (u16)dma_spec->args[0];
- map->mux_val = (u16)dma_spec->args[2];
+ map->mux_val = (u8)dma_spec->args[2];
dma_spec->args[2] = 0;
dma_spec->args_count = 2;
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 8722bcba489d..5eef13380ca8 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -366,6 +366,20 @@ struct xilinx_dma_chan {
u16 tdest;
};
+/**
+ * enum xdma_ip_type: DMA IP type.
+ *
+ * XDMA_TYPE_AXIDMA: Axi dma ip.
+ * XDMA_TYPE_CDMA: Axi cdma ip.
+ * XDMA_TYPE_VDMA: Axi vdma ip.
+ *
+ */
+enum xdma_ip_type {
+ XDMA_TYPE_AXIDMA = 0,
+ XDMA_TYPE_CDMA,
+ XDMA_TYPE_VDMA,
+};
+
struct xilinx_dma_config {
enum xdma_ip_type dmatype;
int (*clk_init)(struct platform_device *pdev, struct clk **axi_clk,
diff --git a/include/linux/dma/xilinx_dma.h b/include/linux/dma/xilinx_dma.h
index 3ae300052553..34b98f276ed0 100644
--- a/include/linux/dma/xilinx_dma.h
+++ b/include/linux/dma/xilinx_dma.h
@@ -41,20 +41,6 @@ struct xilinx_vdma_config {
int ext_fsync;
};
-/**
- * enum xdma_ip_type: DMA IP type.
- *
- * XDMA_TYPE_AXIDMA: Axi dma ip.
- * XDMA_TYPE_CDMA: Axi cdma ip.
- * XDMA_TYPE_VDMA: Axi vdma ip.
- *
- */
-enum xdma_ip_type {
- XDMA_TYPE_AXIDMA = 0,
- XDMA_TYPE_CDMA,
- XDMA_TYPE_VDMA,
-};
-
int xilinx_vdma_channel_set_config(struct dma_chan *dchan,
struct xilinx_vdma_config *cfg);
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 8319101170fc..f838764993eb 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -329,7 +329,7 @@ enum dma_slave_buswidth {
* @src_addr_width: this is the width in bytes of the source (RX)
* register where DMA data shall be read. If the source
* is memory this may be ignored depending on architecture.
- * Legal values: 1, 2, 4, 8.
+ * Legal values: 1, 2, 3, 4, 8, 16, 32, 64.
* @dst_addr_width: same as src_addr_width but for destination
* target (TX) mutatis mutandis.
* @src_maxburst: the maximum number of words (note: words, as in
@@ -404,14 +404,16 @@ enum dma_residue_granularity {
DMA_RESIDUE_GRANULARITY_BURST = 2,
};
-/* struct dma_slave_caps - expose capabilities of a slave channel only
- *
- * @src_addr_widths: bit mask of src addr widths the channel supports
- * @dst_addr_widths: bit mask of dstn addr widths the channel supports
- * @directions: bit mask of slave direction the channel supported
- * since the enum dma_transfer_direction is not defined as bits for each
- * type of direction, the dma controller should fill (1 << <TYPE>) and same
- * should be checked by controller as well
+/**
+ * struct dma_slave_caps - expose capabilities of a slave channel only
+ * @src_addr_widths: bit mask of src addr widths the channel supports.
+ * Width is specified in bytes, e.g. for a channel supporting
+ * a width of 4 the mask should have BIT(4) set.
+ * @dst_addr_widths: bit mask of dst addr widths the channel supports
+ * @directions: bit mask of slave directions the channel supports.
+ * Since the enum dma_transfer_direction is not defined as bit flag for
+ * each type, the dma controller should set BIT(<TYPE>) and same
+ * should be checked by controller as well
* @max_burst: max burst capability per-transfer
* @cmd_pause: true, if pause and thereby resume is supported
* @cmd_terminate: true, if terminate cmd is supported
@@ -678,11 +680,13 @@ struct dma_filter {
* @dev_id: unique device ID
* @dev: struct device reference for dma mapping api
* @src_addr_widths: bit mask of src addr widths the device supports
+ * Width is specified in bytes, e.g. for a device supporting
+ * a width of 4 the mask should have BIT(4) set.
* @dst_addr_widths: bit mask of dst addr widths the device supports
- * @directions: bit mask of slave direction the device supports since
- * the enum dma_transfer_direction is not defined as bits for
- * each type of direction, the dma controller should fill (1 <<
- * <TYPE>) and same should be checked by controller as well
+ * @directions: bit mask of slave directions the device supports.
+ * Since the enum dma_transfer_direction is not defined as bit flag for
+ * each type, the dma controller should set BIT(<TYPE>) and same
+ * should be checked by controller as well
* @max_burst: max burst capability per-transfer
* @residue_granularity: granularity of the transfer residue reported
* by tx_status