Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  MAINTAINERS: add myself as maintainer of USB/IP
  usb: r8a66597-hcd: fix cannot detect low/full speed device
  USB: ehci-ath79: fix a NULL pointer dereference
  USB: Add new FT232H chip to drivers/usb/serial/ftdi_sio.c
  usb/isp1760: Fix bug preventing the unlinking of control urbs
  USB: Fix up URB error codes to reflect implementation.
  xhci: Always set urb->status to zero for isoc endpoints.
  xhci: Add reset on resume quirk for asrock p67 host
  xHCI 1.0: Incompatible Device Error
  USB: don't let errors prevent system sleep
  USB: don't let the hub driver prevent system sleep
  USB: change maintainership of ohci-hcd and ehci-hcd
  xHCI 1.0: Force Stopped Event(FSE)
  xhci: Don't warn about zeroed bMaxBurst descriptor field.
  USB: Free bandwidth when usb_disable_device is called.
  xhci: Reject double add of active endpoints.
  USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big.
  usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO
  usb: musb: host: compare status for negative error values

21 files changed, 164 insertions, 34 deletions

diff --git a/Documentation/usb/error-codes.txt b/Documentation/usb/error-codes.txt
index d83703ea74b2..b3f606b81a03 100644
--- a/Documentation/usb/error-codes.txt
+++ b/Documentation/usb/error-codes.txt
@@ -76,6 +76,13 @@ A transfer's actual_length may be positive even when an error has been
 reported.  That's because transfers often involve several packets, so that
 one or more packets could finish before an error stops further endpoint I/O.
 
+For isochronous URBs, the urb status value is non-zero only if the URB is
+unlinked, the device is removed, the host controller is disabled, or the total
+transferred length is less than the requested length and the URB_SHORT_NOT_OK
+flag is set.  Completion handlers for isochronous URBs should only see
+urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.
+Individual frame descriptor status fields may report more status codes.
+
 
 0			Transfer completed successfully
 
@@ -132,7 +139,7 @@ one or more packets could finish before an error stops further endpoint I/O.
 			device removal events immediately.
 
 -EXDEV			ISO transfer only partially completed
-			look at individual frame status for details
+			(only set in iso_frame_desc[n].status, not urb->status)
 
 -EINVAL			ISO madness, if this happens: Log off and go home
 
diff --git a/MAINTAINERS b/MAINTAINERS
index f0358cd91de3..d2dcef7cd9b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6434,8 +6434,9 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6465,6 +6466,12 @@ S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
+USB/IP DRIVERS
+M:	Matt Mooney <mfm@muteddisk.com>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	drivers/staging/usbip/
+
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
@@ -6494,8 +6501,9 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Orphan
+S:	Maintained
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index aa3cc465a601..34e3da5aa72a 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -1187,13 +1187,22 @@ static int usb_suspend_both(struct usb_device *udev, pm_message_t msg)
 		for (i = n - 1; i >= 0; --i) {
 			intf = udev->actconfig->interface[i];
 			status = usb_suspend_interface(udev, intf, msg);
+
+			/* Ignore errors during system sleep transitions */
+			if (!(msg.event & PM_EVENT_AUTO))
+				status = 0;
 			if (status != 0)
 				break;
 		}
 	}
-	if (status == 0)
+	if (status == 0) {
 		status = usb_suspend_device(udev, msg);
 
+		/* Again, ignore errors during system sleep transitions */
+		if (!(msg.event & PM_EVENT_AUTO))
+			status = 0;
+	}
+
 	/* If the suspend failed, resume interfaces that did get suspended */
 	if (status != 0) {
 		msg.event ^= (PM_EVENT_SUSPEND | PM_EVENT_RESUME);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 90ae1753dda1..a428aa080a36 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -1634,6 +1634,7 @@ void usb_disconnect(struct usb_device **pdev)
 {
 	struct usb_device	*udev = *pdev;
 	int			i;
+	struct usb_hcd		*hcd = bus_to_hcd(udev->bus);
 
 	if (!udev) {
 		pr_debug ("%s nodev\n", __func__);
@@ -1661,7 +1662,9 @@ void usb_disconnect(struct usb_device **pdev)
 	 * so that the hardware is now fully quiesced.
 	 */
 	dev_dbg (&udev->dev, "unregistering device\n");
+	mutex_lock(hcd->bandwidth_mutex);
 	usb_disable_device(udev, 0);
+	mutex_unlock(hcd->bandwidth_mutex);
 	usb_hcd_synchronize_unlinks(udev);
 
 	usb_remove_ep_devs(&udev->ep0);
@@ -2362,6 +2365,10 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
 				USB_DEVICE_REMOTE_WAKEUP, 0,
 				NULL, 0,
 				USB_CTRL_SET_TIMEOUT);
+
+		/* System sleep transitions should never fail */
+		if (!(msg.event & PM_EVENT_AUTO))
+			status = 0;
 	} else {
 		/* device has up to 10 msec to fully suspend */
 		dev_dbg(&udev->dev, "usb %ssuspend\n",
@@ -2611,16 +2618,15 @@ static int hub_suspend(struct usb_interface *intf, pm_message_t msg)
 	struct usb_device	*hdev = hub->hdev;
 	unsigned		port1;
 
-	/* fail if children aren't already suspended */
+	/* Warn if children aren't already suspended */
 	for (port1 = 1; port1 <= hdev->maxchild; port1++) {
 		struct usb_device	*udev;
 
 		udev = hdev->children [port1-1];
 		if (udev && udev->can_submit) {
-			if (!(msg.event & PM_EVENT_AUTO))
-				dev_dbg(&intf->dev, "port %d nyet suspended\n",
-						port1);
-			return -EBUSY;
+			dev_warn(&intf->dev, "port %d nyet suspended\n", port1);
+			if (msg.event & PM_EVENT_AUTO)
+				return -EBUSY;
 		}
 	}
 
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 5701e857392b..64c7ab4702df 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1135,10 +1135,13 @@ void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf,
  * Deallocates hcd/hardware state for the endpoints (nuking all or most
  * pending urbs) and usbcore state for the interfaces, so that usbcore
  * must usb_set_configuration() before any interfaces could be used.
+ *
+ * Must be called with hcd->bandwidth_mutex held.
  */
 void usb_disable_device(struct usb_device *dev, int skip_ep0)
 {
 	int i;
+	struct usb_hcd *hcd = bus_to_hcd(dev->bus);
 
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
@@ -1172,6 +1175,16 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
 
 	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
 		skip_ep0 ? "non-ep0" : "all");
+	if (hcd->driver->check_bandwidth) {
+		/* First pass: Cancel URBs, leave endpoint pointers intact. */
+		for (i = skip_ep0; i < 16; ++i) {
+			usb_disable_endpoint(dev, i, false);
+			usb_disable_endpoint(dev, i + USB_DIR_IN, false);
+		}
+		/* Remove endpoints from the host controller internal state */
+		usb_hcd_alloc_bandwidth(dev, NULL, NULL, NULL);
+		/* Second pass: remove endpoint pointers */
+	}
 	for (i = skip_ep0; i < 16; ++i) {
 		usb_disable_endpoint(dev, i, true);
 		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
@@ -1727,6 +1740,7 @@ free_interfaces:
 	/* if it's already configured, clear out old state first.
 	 * getting rid of old interfaces means unbinding their drivers.
 	 */
+	mutex_lock(hcd->bandwidth_mutex);
 	if (dev->state != USB_STATE_ADDRESS)
 		usb_disable_device(dev, 1);	/* Skip ep0 */
 
@@ -1739,7 +1753,6 @@ free_interfaces:
 	 * host controller will not allow submissions to dropped endpoints.  If
 	 * this call fails, the device state is unchanged.
 	 */
-	mutex_lock(hcd->bandwidth_mutex);
 	ret = usb_hcd_alloc_bandwidth(dev, cp, NULL, NULL);
 	if (ret < 0) {
 		mutex_unlock(hcd->bandwidth_mutex);
diff --git a/drivers/usb/host/ehci-ath79.c b/drivers/usb/host/ehci-ath79.c
index 98cc8a13169c..aa248c2f2c60 100644
--- a/drivers/usb/host/ehci-ath79.c
+++ b/drivers/usb/host/ehci-ath79.c
@@ -44,7 +44,6 @@ static int ehci_ath79_init(struct usb_hcd *hcd)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	struct platform_device *pdev = to_platform_device(hcd->self.controller);
 	const struct platform_device_id *id;
-	int hclength;
 	int ret;
 
 	id = platform_get_device_id(pdev);
@@ -53,20 +52,23 @@ static int ehci_ath79_init(struct usb_hcd *hcd)
 		return -EINVAL;
 	}
 
-	hclength = HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
 	switch (id->driver_data) {
 	case EHCI_ATH79_IP_V1:
 		ehci->has_synopsys_hc_bug = 1;
 
 		ehci->caps = hcd->regs;
-		ehci->regs = hcd->regs + hclength;
+		ehci->regs = hcd->regs +
+			HC_LENGTH(ehci,
+				  ehci_readl(ehci, &ehci->caps->hc_capbase));
 		break;
 
 	case EHCI_ATH79_IP_V2:
 		hcd->has_tt = 1;
 
 		ehci->caps = hcd->regs + 0x100;
-		ehci->regs = hcd->regs + 0x100 + hclength;
+		ehci->regs = hcd->regs + 0x100 +
+			HC_LENGTH(ehci,
+				  ehci_readl(ehci, &ehci->caps->hc_capbase));
 		break;
 
 	default:
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index b435ed67dd5c..f8030ee928e8 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1,4 +1,8 @@
 /*
+ * Enhanced Host Controller Interface (EHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
+ *
  * Copyright (c) 2000-2004 by David Brownell
  *
  * This program is free software; you can redistribute it and/or modify it
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index c9e6e454c625..55d3d5859ac5 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1555,7 +1555,7 @@ static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
 
 	/* We need to forcefully reclaim the slot since some transfers never
 	   return, e.g. interrupt transfers and NAKed bulk transfers. */
-	if (usb_pipebulk(urb->pipe)) {
+	if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
 		skip_map = reg_read32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG);
 		skip_map |= (1 << qh->slot);
 		reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, skip_map);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9aa10bdf3918..f9cf3f04b742 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -1,5 +1,7 @@
 /*
- * OHCI HCD (Host Controller Driver) for USB.
+ * Open Host Controller Interface (OHCI) driver for USB.
+ *
+ * Maintainer: Alan Stern <stern@rowland.harvard.edu>
  *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c
index db6f8b9c19b6..4586369dda00 100644
--- a/drivers/usb/host/r8a66597-hcd.c
+++ b/drivers/usb/host/r8a66597-hcd.c
@@ -2517,6 +2517,7 @@ static int __devinit r8a66597_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&r8a66597->child_device);
 
 	hcd->rsrc_start = res->start;
+	hcd->has_tt = 1;
 
 	ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | irq_trigger);
 	if (ret != 0) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 0f8e1d29a858..fcb7f7efc86d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1215,8 +1215,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
 		/* dig out max burst from ep companion desc */
 		max_packet = ep->ss_ep_comp.bMaxBurst;
-		if (!max_packet)
-			xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n");
 		ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
 		break;
 	case USB_SPEED_HIGH:
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 17541d09eabb..cb16de213f64 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -29,6 +29,9 @@
 #define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
 
+#define PCI_VENDOR_ID_ETRON		0x1b6f
+#define PCI_DEVICE_ID_ASROCK_P67	0x7023
+
 static const char hcd_name[] = "xhci_hcd";
 
 /* called after powerup, by probe or system-pm "wakeup" */
@@ -134,6 +137,11 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
 		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
 		xhci->limit_active_eps = 64;
 	}
+	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
+			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
+		xhci->quirks |= XHCI_RESET_ON_RESUME;
+		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
+	}
 
 	/* Make sure the HC is halted. */
 	retval = xhci_halt(xhci);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 800f417c7309..70cacbbe7fb9 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1733,6 +1733,7 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		frame->status = -EOVERFLOW;
 		skip_td = true;
 		break;
+	case COMP_DEV_ERR:
 	case COMP_STALL:
 		frame->status = -EPROTO;
 		skip_td = true;
@@ -1767,9 +1768,6 @@ static int process_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 		}
 	}
 
-	if ((idx == urb_priv->length - 1) && *status == -EINPROGRESS)
-		*status = 0;
-
 	return finish_td(xhci, td, event_trb, event, ep, status, false);
 }
 
@@ -1787,8 +1785,7 @@ static int skip_isoc_td(struct xhci_hcd *xhci, struct xhci_td *td,
 	idx = urb_priv->td_cnt;
 	frame = &td->urb->iso_frame_desc[idx];
 
-	/* The transfer is partly done */
-	*status = -EXDEV;
+	/* The transfer is partly done. */
 	frame->status = -EXDEV;
 
 	/* calc actual length */
@@ -2016,6 +2013,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 				 TRB_TO_SLOT_ID(le32_to_cpu(event->flags)),
 				 ep_index);
 		goto cleanup;
+	case COMP_DEV_ERR:
+		xhci_warn(xhci, "WARN: detect an incompatible device");
+		status = -EPROTO;
+		break;
 	case COMP_MISSED_INT:
 		/*
 		 * When encounter missed service error, one or more isoc tds
@@ -2063,6 +2064,20 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		/* Is this a TRB in the currently executing TD? */
 		event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
 				td->last_trb, event_dma);
+
+		/*
+		 * Skip the Force Stopped Event. The event_trb(event_dma) of FSE
+		 * is not in the current TD pointed by ep_ring->dequeue because
+		 * that the hardware dequeue pointer still at the previous TRB
+		 * of the current TD. The previous TRB maybe a Link TD or the
+		 * last TRB of the previous TD. The command completion handle
+		 * will take care the rest.
+		 */
+		if (!event_seg && trb_comp_code == COMP_STOP_INVAL) {
+			ret = 0;
+			goto cleanup;
+		}
+
 		if (!event_seg) {
 			if (!ep->skip ||
 			    !usb_endpoint_xfer_isoc(&td->urb->ep->desc)) {
@@ -2158,6 +2173,11 @@ cleanup:
 						urb->transfer_buffer_length,
 						status);
 			spin_unlock(&xhci->lock);
+			/* EHCI, UHCI, and OHCI always unconditionally set the
+			 * urb->status of an isochronous endpoint to 0.
+			 */
+			if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
+				status = 0;
 			usb_hcd_giveback_urb(bus_to_hcd(urb->dev->bus), urb, status);
 			spin_lock(&xhci->lock);
 		}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 06e7023258d0..f5fe1ac301ab 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -759,6 +759,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 		msleep(100);
 
 	spin_lock_irq(&xhci->lock);
+	if (xhci->quirks & XHCI_RESET_ON_RESUME)
+		hibernated = true;
 
 	if (!hibernated) {
 		/* step 1: restore register */
@@ -1401,6 +1403,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	u32 added_ctxs;
 	unsigned int last_ctx;
 	u32 new_add_flags, new_drop_flags, new_slot_info;
+	struct xhci_virt_device *virt_dev;
 	int ret = 0;
 
 	ret = xhci_check_args(hcd, udev, ep, 1, true, __func__);
@@ -1425,11 +1428,25 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		return 0;
 	}
 
-	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
-	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	virt_dev = xhci->devs[udev->slot_id];
+	in_ctx = virt_dev->in_ctx;
+	out_ctx = virt_dev->out_ctx;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
 	ep_index = xhci_get_endpoint_index(&ep->desc);
 	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
+
+	/* If this endpoint is already in use, and the upper layers are trying
+	 * to add it again without dropping it, reject the addition.
+	 */
+	if (virt_dev->eps[ep_index].ring &&
+			!(le32_to_cpu(ctrl_ctx->drop_flags) &
+				xhci_get_endpoint_flag(&ep->desc))) {
+		xhci_warn(xhci, "Trying to add endpoint 0x%x "
+				"without dropping it.\n",
+				(unsigned int) ep->desc.bEndpointAddress);
+		return -EINVAL;
+	}
+
 	/* If the HCD has already noted the endpoint is enabled,
 	 * ignore this request.
 	 */
@@ -1445,8 +1462,7 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	 * process context, not interrupt context (or so documenation
 	 * for usb_set_interface() and usb_set_configuration() claim).
 	 */
-	if (xhci_endpoint_init(xhci, xhci->devs[udev->slot_id],
-				udev, ep, GFP_NOIO) < 0) {
+	if (xhci_endpoint_init(xhci, virt_dev, udev, ep, GFP_NOIO) < 0) {
 		dev_dbg(&udev->dev, "%s - could not initialize ep %#x\n",
 				__func__, ep->desc.bEndpointAddress);
 		return -ENOMEM;
@@ -1537,6 +1553,11 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
 				"and endpoint is not disabled.\n");
 		ret = -EINVAL;
 		break;
+	case COMP_DEV_ERR:
+		dev_warn(&udev->dev, "ERROR: Incompatible device for endpoint "
+				"configure command.\n");
+		ret = -ENODEV;
+		break;
 	case COMP_SUCCESS:
 		dev_dbg(&udev->dev, "Successful Endpoint Configure command\n");
 		ret = 0;
@@ -1571,6 +1592,11 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
 		xhci_dbg_ctx(xhci, virt_dev->out_ctx, 1);
 		ret = -EINVAL;
 		break;
+	case COMP_DEV_ERR:
+		dev_warn(&udev->dev, "ERROR: Incompatible device for evaluate "
+				"context command.\n");
+		ret = -ENODEV;
+		break;
 	case COMP_MEL_ERR:
 		/* Max Exit Latency too large error */
 		dev_warn(&udev->dev, "WARN: Max Exit Latency too large\n");
@@ -2853,6 +2879,11 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 		dev_warn(&udev->dev, "Device not responding to set address.\n");
 		ret = -EPROTO;
 		break;
+	case COMP_DEV_ERR:
+		dev_warn(&udev->dev, "ERROR: Incompatible device for address "
+				"device command.\n");
+		ret = -ENODEV;
+		break;
 	case COMP_SUCCESS:
 		xhci_dbg(xhci, "Successful Address Device command\n");
 		break;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 7d1ea3bf5e1f..d8bbf5ccb10d 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -874,6 +874,8 @@ struct xhci_transfer_event {
 #define COMP_PING_ERR	20
 /* Event Ring is full */
 #define COMP_ER_FULL	21
+/* Incompatible Device Error */
+#define COMP_DEV_ERR	22
 /* Missed Service Error - HC couldn't service an isoc ep within interval */
 #define COMP_MISSED_INT	23
 /* Successfully stopped command ring */
@@ -1308,6 +1310,7 @@ struct xhci_hcd {
  */
 #define XHCI_EP_LIMIT_QUIRK	(1 << 5)
 #define XHCI_BROKEN_MSI		(1 << 6)
+#define XHCI_RESET_ON_RESUME	(1 << 7)
 	unsigned int		num_active_eps;
 	unsigned int		limit_active_eps;
 	/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index 0a50a35e1853..6aeb363e63e7 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -1524,6 +1524,12 @@ static void musb_gadget_fifo_flush(struct usb_ep *ep)
 		csr = musb_readw(epio, MUSB_TXCSR);
 		if (csr & MUSB_TXCSR_FIFONOTEMPTY) {
 			csr |= MUSB_TXCSR_FLUSHFIFO | MUSB_TXCSR_P_WZC_BITS;
+			/*
+			 * Setting both TXPKTRDY and FLUSHFIFO makes controller
+			 * to interrupt current FIFO loading, but not flushing
+			 * the already loaded ones.
+			 */
+			csr &= ~MUSB_TXCSR_TXPKTRDY;
 			musb_writew(epio, MUSB_TXCSR, csr);
 			/* REVISIT may be inappropriate w/o FIFONOTEMPTY ... */
 			musb_writew(epio, MUSB_TXCSR, csr);
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 7295e316bdfc..8b2473fa0f47 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -1575,7 +1575,7 @@ void musb_host_rx(struct musb *musb, u8 epnum)
 			/* even if there was an error, we did the dma
 			 * for iso_frame_desc->length
 			 */
-			if (d->status != EILSEQ && d->status != -EOVERFLOW)
+			if (d->status != -EILSEQ && d->status != -EOVERFLOW)
 				d->status = 0;
 
 			if (++qh->iso_idx >= urb->number_of_packets)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 162728977553..2e06b90aa1f8 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -179,6 +179,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FTDI_VID, FTDI_232RL_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_8U2232C_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_4232H_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_232H_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_MICRO_CHAMELEON_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RELAIS_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_OPENDCC_PID) },
@@ -848,7 +849,8 @@ static const char *ftdi_chip_name[] = {
 	[FT2232C] = "FT2232C",
 	[FT232RL] = "FT232RL",
 	[FT2232H] = "FT2232H",
-	[FT4232H] = "FT4232H"
+	[FT4232H] = "FT4232H",
+	[FT232H]  = "FT232H"
 };
 
 
@@ -1168,6 +1170,7 @@ static __u32 get_ftdi_divisor(struct tty_struct *tty,
 		break;
 	case FT2232H: /* FT2232H chip */
 	case FT4232H: /* FT4232H chip */
+	case FT232H:  /* FT232H chip */
 		if ((baud <= 12000000) & (baud >= 1200)) {
 			div_value = ftdi_2232h_baud_to_divisor(baud);
 		} else if (baud < 1200) {
@@ -1429,9 +1432,12 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 	} else if (version < 0x600) {
 		/* Assume it's an FT232BM (or FT245BM) */
 		priv->chip_type = FT232BM;
-	} else {
-		/* Assume it's an FT232R */
+	} else if (version < 0x900) {
+		/* Assume it's an FT232RL */
 		priv->chip_type = FT232RL;
+	} else {
+		/* Assume it's an FT232H */
+		priv->chip_type = FT232H;
 	}
 	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
 }
@@ -1559,7 +1565,8 @@ static int create_sysfs_attrs(struct usb_serial_port *port)
 		     priv->chip_type == FT2232C ||
 		     priv->chip_type == FT232RL ||
 		     priv->chip_type == FT2232H ||
-		     priv->chip_type == FT4232H)) {
+		     priv->chip_type == FT4232H ||
+		     priv->chip_type == FT232H)) {
 			retval = device_create_file(&port->dev,
 						    &dev_attr_latency_timer);
 		}
@@ -1580,7 +1587,8 @@ static void remove_sysfs_attrs(struct usb_serial_port *port)
 		    priv->chip_type == FT2232C ||
 		    priv->chip_type == FT232RL ||
 		    priv->chip_type == FT2232H ||
-		    priv->chip_type == FT4232H) {
+		    priv->chip_type == FT4232H ||
+                    priv->chip_type == FT232H) {
 			device_remove_file(&port->dev, &dev_attr_latency_timer);
 		}
 	}
@@ -2212,6 +2220,7 @@ static int ftdi_tiocmget(struct tty_struct *tty)
 	case FT232RL:
 	case FT2232H:
 	case FT4232H:
+	case FT232H:
 		len = 2;
 		break;
 	default:
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 213fe3d61282..19584faa86f9 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -156,7 +156,8 @@ enum ftdi_chip_type {
 	FT2232C = 4,
 	FT232RL = 5,
 	FT2232H = 6,
-	FT4232H = 7
+	FT4232H = 7,
+	FT232H  = 8
 };
 
 enum ftdi_sio_baudrate {
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index ab1fcdf3c378..19156d1049fe 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -22,6 +22,7 @@
 #define FTDI_8U232AM_ALT_PID 0x6006 /* FTDI's alternate PID for above */
 #define FTDI_8U2232C_PID 0x6010 /* Dual channel device */
 #define FTDI_4232H_PID 0x6011 /* Quad channel hi-speed device */
+#define FTDI_232H_PID  0x6014 /* Single channel hi-speed device */
 #define FTDI_SIO_PID	0x8372	/* Product Id SIO application of 8U100AX */
 #define FTDI_232RL_PID  0xFBFA  /* Product ID for FT232RL */
 
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index c6d92a530086..ea8445689c85 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1745,6 +1745,7 @@ static int ti_download_firmware(struct ti_device *tdev)
 	}
 	if (fw_p->size > TI_FIRMWARE_BUF_SIZE) {
 		dev_err(&dev->dev, "%s - firmware too large %zu\n", __func__, fw_p->size);
+		release_firmware(fw_p);
 		return -ENOENT;
 	}