diff options
author | Arnd Bergmann | 2020-12-09 00:04:34 +0100 |
---|---|---|
committer | Arnd Bergmann | 2020-12-09 00:04:35 +0100 |
commit | 456983022454b2ea5db8de3129c327dba4bf1108 (patch) | |
tree | b0a076b924574829154d9989be63453b715049b6 | |
parent | 261078ab9002d0b5aff807b374425ef8120a84f4 (diff) | |
parent | 29952fea5e85083374d19cb0a33206962e087d5b (diff) |
Merge tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Veyron backlight fix, another fix for dtbs-check and some additions
to the rk3288-based VMARC boards.
* tag 'v5.11-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add SDIO0 node for VMARC SOM
ARM: dts: rockchip: Add rtc node for VMARC SOM
ARM: dts: rockchip: rename wdt nodename to watchdog on rv1108
ARM: dts: rockchip: Remove 0 point from brightness-levels on rk3288-veyron
Link: https://lore.kernel.org/r/4582475.GXAFRqVoOG@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-rw-r--r-- | arch/arm/boot/dts/rk3288-veyron-jaq.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/rk3288-veyron-tiger.dts | 2 | ||||
-rw-r--r-- | arch/arm/boot/dts/rk3288-vmarc-som.dtsi | 40 | ||||
-rw-r--r-- | arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi | 21 | ||||
-rw-r--r-- | arch/arm/boot/dts/rv1108.dtsi | 2 | ||||
-rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi | 16 |
7 files changed, 81 insertions, 4 deletions
diff --git a/arch/arm/boot/dts/rk3288-veyron-jaq.dts b/arch/arm/boot/dts/rk3288-veyron-jaq.dts index af77ab20586d..4a148cf1defc 100644 --- a/arch/arm/boot/dts/rk3288-veyron-jaq.dts +++ b/arch/arm/boot/dts/rk3288-veyron-jaq.dts @@ -20,7 +20,7 @@ &backlight { /* Jaq panel PWM must be >= 3%, so start non-zero brightness at 8 */ - brightness-levels = <0 8 255>; + brightness-levels = <8 255>; num-interpolated-steps = <247>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index f8b69e0a16a0..82fc6fba9999 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -39,7 +39,7 @@ &backlight { /* Minnie panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; }; diff --git a/arch/arm/boot/dts/rk3288-veyron-tiger.dts b/arch/arm/boot/dts/rk3288-veyron-tiger.dts index 069f0c2c1fdf..52a84cbe7a90 100644 --- a/arch/arm/boot/dts/rk3288-veyron-tiger.dts +++ b/arch/arm/boot/dts/rk3288-veyron-tiger.dts @@ -23,7 +23,7 @@ &backlight { /* Tiger panel PWM must be >= 1%, so start non-zero brightness at 3 */ - brightness-levels = <0 3 255>; + brightness-levels = <3 255>; num-interpolated-steps = <252>; }; diff --git a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi index 4a373f5aa600..0ae2bd150e37 100644 --- a/arch/arm/boot/dts/rk3288-vmarc-som.dtsi +++ b/arch/arm/boot/dts/rk3288-vmarc-som.dtsi @@ -231,6 +231,23 @@ }; }; +&i2c1 { + clock-frequency = <400000>; + status = "okay"; + + hym8563: rtc@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + interrupt-parent = <&gpio5>; + interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "hym8563"; + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + }; +}; + &i2c5 { status = "okay"; }; @@ -241,10 +258,17 @@ gpio1830-supply = <&vcc_18>; gpio30-supply = <&vcc_io>; sdcard-supply = <&vccio_sd>; + wifi-supply = <&vcc_wl>; status = "okay"; }; &pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = <5 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + pcfg_pull_none_drv_8ma: pcfg-pull-none-drv-8ma { drive-strength = <8>; }; @@ -260,6 +284,12 @@ }; }; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + sdmmc { sdmmc_bus4: sdmmc-bus4 { rockchip,pins = @@ -291,6 +321,16 @@ }; }; +&sdio_pwrseq { + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>; /* WIFI_REG_ON */ +}; + &usbphy { status = "okay"; }; diff --git a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi index 26b53eac4706..da1d548b7330 100644 --- a/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi +++ b/arch/arm/boot/dts/rockchip-radxa-dalang-carrier.dtsi @@ -15,6 +15,14 @@ #clock-cells = <0>; }; + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&hym8563>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + }; + vcc12v_dcin: vcc12v-dcin-regulator { compatible = "regulator-fixed"; regulator-name = "vcc12v_dcin"; @@ -78,6 +86,19 @@ status = "okay"; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rv1108.dtsi b/arch/arm/boot/dts/rv1108.dtsi index a1a08cb9364e..e491964b1c3d 100644 --- a/arch/arm/boot/dts/rv1108.dtsi +++ b/arch/arm/boot/dts/rv1108.dtsi @@ -299,7 +299,7 @@ clock-names = "timer", "pclk"; }; - watchdog: wdt@10360000 { + watchdog: watchdog@10360000 { compatible = "snps,dw-wdt"; reg = <0x10360000 0x100>; interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi index 5d087be04af8..7257494d2831 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399pro-vmarc-som.dtsi @@ -353,6 +353,12 @@ }; }; + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + vbus_host { usb1_en_oc: usb1-en-oc { rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>; @@ -371,6 +377,16 @@ pmu1830-supply = <&vcc_1v8>; }; +&sdio_pwrseq { + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>; +}; + &sdhci { bus-width = <8>; mmc-hs400-1_8v; |