rtl8192cu: Prevent Ooops under rtl92c_set_fw_rsvdpagepkt

rtl92c_set_fw_rsvdpagepkt is used by rtl8192cu and its pci sibling rtl8192ce.
rtl_cmd_send_packet crashes when called inside rtl8192cu because it works on
memory allocated only by rtl8192ce.
Fix the crash by calling a dummy function when used in rtl8192cu.
Comparision with the realtek vendor driver makes me think, something is missing in
the dummy function.
Short test as WPA2 station show good results connected to an 802.11g basestation.
Traffic stops after few MBytes as WPA2 station connected to an 802.11n basestation.

Signed-off-by: Karsten Wiese <fzuuzf@googlemail.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

5 files changed, 26 insertions, 6 deletions

diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
index a00861b26ece..29983bc96a89 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.c
@@ -656,7 +656,8 @@ static u8 reserved_page_packet[TOTAL_RESERVED_PKT_LEN] = {
 	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
 };
 
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw,
+	 bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *))
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
@@ -722,7 +723,10 @@ void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
 	memcpy((u8 *)skb_put(skb, totalpacketlen),
 	       &reserved_page_packet, totalpacketlen);
 
-	rtstatus = rtl_cmd_send_packet(hw, skb);
+	if (cmd_send_packet)
+		rtstatus = cmd_send_packet(hw, skb);
+	else
+		rtstatus = rtl_cmd_send_packet(hw, skb);
 
 	if (rtstatus)
 		b_dlok = true;
diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
index a815bd6273da..b64ae45dc674 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192c/fw_common.h
@@ -109,7 +109,9 @@ void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw, u8 element_id,
 			 u32 cmd_len, u8 *p_cmdbuffer);
 void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
 void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
+void rtl92c_set_fw_rsvdpagepkt
+	(struct ieee80211_hw *hw,
+	 bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *));
 void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
 void usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, void *data, u16 len);
 void rtl92c_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 8ec0f031f48a..55357d69397a 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -459,7 +459,7 @@ void rtl92ce_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 				rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
 					       tmp_reg422 & (~BIT(6)));
 
-				rtl92c_set_fw_rsvdpagepkt(hw, 0);
+				rtl92c_set_fw_rsvdpagepkt(hw, NULL);
 
 				_rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
 				_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
index 04aa0b5f5b3d..873363acbacf 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.c
@@ -1592,6 +1592,20 @@ void rtl92cu_get_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 	}
 }
 
+bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+  /* Currently nothing happens here.
+   * Traffic stops after some seconds in WPA2 802.11n mode.
+   * Maybe because rtl8192cu chip should be set from here?
+   * If I understand correctly, the realtek vendor driver sends some urbs
+   * if its "here".
+   *
+   * This is maybe necessary:
+   * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
+   */
+	return true;
+}
+
 void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
@@ -1939,7 +1953,8 @@ void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
 					recover = true;
 				rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
 					       tmp_reg422 & (~BIT(6)));
-				rtl92c_set_fw_rsvdpagepkt(hw, 0);
+				rtl92c_set_fw_rsvdpagepkt(hw,
+							  &usb_cmd_send_packet);
 				_rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
 				_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
 				if (recover)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
index 0f7812e0c8aa..c1e33b0228c0 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192cu/hw.h
@@ -104,7 +104,6 @@ bool rtl92cu_gpio_radio_on_off_checking(struct ieee80211_hw *hw, u8 * valid);
 void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
 int rtl92c_download_fw(struct ieee80211_hw *hw);
 void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
 void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
 void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw,
 			 u8 element_id, u32 cmd_len, u8 *p_cmdbuffer);