sh-sci: improve clock framework support

Use enable/disable hooks for clock framework integration.
Make sure we control the clock for the serial console as well.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

2 files changed, 47 insertions, 31 deletions

diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 408624ae7fec..3daf76725ac6 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -76,8 +76,10 @@ struct sci_port {
 	int			break_flag;
 
 #ifdef CONFIG_HAVE_CLK
-	/* Port clock */
-	struct clk		*clk;
+	/* Interface clock */
+	struct clk		*iclk;
+	/* Data clock */
+	struct clk		*dclk;
 #endif
 	struct list_head	node;
 };
@@ -166,12 +168,12 @@ static void h8300_sci_config(struct uart_port *port, unsigned int ctrl)
 		*mstpcrl &= ~mask;
 }
 
-static inline void h8300_sci_enable(struct uart_port *port)
+static void h8300_sci_enable(struct uart_port *port)
 {
 	h8300_sci_config(port, sci_enable);
 }
 
-static inline void h8300_sci_disable(struct uart_port *port)
+static void h8300_sci_disable(struct uart_port *port)
 {
 	h8300_sci_config(port, sci_disable);
 }
@@ -742,13 +744,34 @@ static int sci_notifier(struct notifier_block *self,
 	    (phase == CPUFREQ_RESUMECHANGE)) {
 		spin_lock_irqsave(&priv->lock, flags);
 		list_for_each_entry(sci_port, &priv->ports, node)
-			sci_port->port.uartclk = clk_get_rate(sci_port->clk);
+			sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
 
 		spin_unlock_irqrestore(&priv->lock, flags);
 	}
 
 	return NOTIFY_OK;
 }
+
+static void sci_clk_enable(struct uart_port *port)
+{
+	struct sci_port *sci_port = to_sci_port(port);
+
+	clk_enable(sci_port->dclk);
+	sci_port->port.uartclk = clk_get_rate(sci_port->dclk);
+
+	if (sci_port->iclk)
+		clk_enable(sci_port->iclk);
+}
+
+static void sci_clk_disable(struct uart_port *port)
+{
+	struct sci_port *sci_port = to_sci_port(port);
+
+	if (sci_port->iclk)
+		clk_disable(sci_port->iclk);
+
+	clk_disable(sci_port->dclk);
+}
 #endif
 
 static int sci_request_irq(struct sci_port *port)
@@ -880,10 +903,6 @@ static int sci_startup(struct uart_port *port)
 	if (s->enable)
 		s->enable(port);
 
-#ifdef CONFIG_HAVE_CLK
-	s->clk = clk_get(NULL, "module_clk");
-#endif
-
 	sci_request_irq(s);
 	sci_start_tx(port);
 	sci_start_rx(port, 1);
@@ -901,11 +920,6 @@ static void sci_shutdown(struct uart_port *port)
 
 	if (s->disable)
 		s->disable(port);
-
-#ifdef CONFIG_HAVE_CLK
-	clk_put(s->clk);
-	s->clk = NULL;
-#endif
 }
 
 static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
@@ -1048,7 +1062,8 @@ static struct uart_ops sci_uart_ops = {
 #endif
 };
 
-static void __devinit sci_init_single(struct sci_port *sci_port,
+static void __devinit sci_init_single(struct platform_device *dev,
+				      struct sci_port *sci_port,
 				      unsigned int index,
 				      struct plat_sci_port *p)
 {
@@ -1064,14 +1079,10 @@ static void __devinit sci_init_single(struct sci_port *sci_port,
 #endif
 	sci_port->port.uartclk	= CONFIG_CPU_CLOCK;
 #elif defined(CONFIG_HAVE_CLK)
-	/*
-	 * XXX: We should use a proper SCI/SCIF clock
-	 */
-	{
-		struct clk *clk = clk_get(NULL, "module_clk");
-		sci_port->port.uartclk = clk_get_rate(clk);
-		clk_put(clk);
-	}
+	sci_port->iclk		= p->clk ? clk_get(&dev->dev, p->clk) : NULL;
+	sci_port->dclk		= clk_get(&dev->dev, "module_clk");
+	sci_port->enable	= sci_clk_enable;
+	sci_port->disable	= sci_clk_disable;
 #else
 #error "Need a valid uartclk"
 #endif
@@ -1085,9 +1096,11 @@ static void __devinit sci_init_single(struct sci_port *sci_port,
 
 	sci_port->port.irq	= p->irqs[SCIx_TXI_IRQ];
 	sci_port->port.flags	= p->flags;
+	sci_port->port.dev	= &dev->dev;
 	sci_port->type		= sci_port->port.type = p->type;
 
 	memcpy(&sci_port->irqs, &p->irqs, sizeof(p->irqs));
+
 }
 
 #ifdef CONFIG_SERIAL_SH_SCI_CONSOLE
@@ -1111,14 +1124,21 @@ static void serial_console_write(struct console *co, const char *s,
 				 unsigned count)
 {
 	struct uart_port *port = co->data;
+	struct sci_port *sci_port = to_sci_port(port);
 	unsigned short bits;
 
-	uart_console_write(co->data, s, count, serial_console_putchar);
+	if (sci_port->enable)
+		sci_port->enable(port);
+
+	uart_console_write(port, s, count, serial_console_putchar);
 
 	/* wait until fifo is empty and last bit has been transmitted */
 	bits = SCxSR_TDxE(port) | SCxSR_TEND(port);
 	while ((sci_in(port, SCxSR) & bits) != bits)
 		cpu_relax();
+
+	if (sci_port->disable);
+		sci_port->disable(port);
 }
 
 static int __init serial_console_setup(struct console *co, char *options)
@@ -1152,11 +1172,6 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (!port->type)
 		return -ENODEV;
 
-#ifdef CONFIG_HAVE_CLK
-	if (!sci_port->clk)
-		sci_port->clk = clk_get(NULL, "module_clk");
-#endif
-
 	sci_config_port(port, 0);
 
 	if (sci_port->enable)
@@ -1171,6 +1186,7 @@ static int __init serial_console_setup(struct console *co, char *options)
 	if (ret == 0)
 		sci_stop_rx(port);
 #endif
+	/* TODO: disable clock */
 	return ret;
 }
 
@@ -1250,8 +1266,7 @@ static int __devinit sci_probe_single(struct platform_device *dev,
 		return 0;
 	}
 
-	sciport->port.dev = &dev->dev;
-	sci_init_single(sciport, index, p);
+	sci_init_single(dev, sciport, index, p);
 
 	ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
 	if (ret)
diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h
index 717059d6791f..1c297ddc9d5a 100644
--- a/include/linux/serial_sci.h
+++ b/include/linux/serial_sci.h
@@ -25,6 +25,7 @@ struct plat_sci_port {
 	unsigned int	irqs[SCIx_NR_IRQS];	/* ERI, RXI, TXI, BRI */
 	unsigned int	type;			/* SCI / SCIF / IRDA */
 	upf_t		flags;			/* UPF_* flags */
+	char		*clk;			/* clock string */
 };
 
 #endif /* __LINUX_SERIAL_SCI_H */