diff options
| author | Jernej Skrabec | 2021-02-09 18:58:57 +0100 |
|---|---|---|
| committer | Maxime Ripard | 2021-02-10 11:19:56 +0100 |
| commit | 50791f5d7b6a14b388f46c8885f71d1b98216d1d (patch) | |
| tree | 84da1bd23227a2b8295a8b69148fa3b40f717d07 | |
| parent | 873e5bb9fbd99e4a26c448b5c7af942a6d7aa60d (diff) | |
drm/sun4i: tcon: set sync polarity for tcon1 channel
Channel 1 has polarity bits for vsync and hsync signals but driver never
sets them. It turns out that with pre-HDMI2 controllers seemingly there
is no issue if polarity is not set. However, with HDMI2 controllers
(H6) there often comes to de-synchronization due to phase shift. This
causes flickering screen. It's safe to assume that similar issues might
happen also with pre-HDMI2 controllers.
Solve issue with setting vsync and hsync polarity. Note that display
stacks with tcon top have polarity bits actually in tcon0 polarity
register.
Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.c | 25 | ||||
| -rw-r--r-- | drivers/gpu/drm/sun4i/sun4i_tcon.h | 6 |
2 files changed, 31 insertions, 0 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c index eaaf5d70e352..1e643bc7e786 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.c +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c @@ -689,6 +689,30 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon, SUN4I_TCON1_BASIC5_V_SYNC(vsync) | SUN4I_TCON1_BASIC5_H_SYNC(hsync)); + /* Setup the polarity of multiple signals */ + if (tcon->quirks->polarity_in_ch0) { + val = 0; + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE; + + regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val); + } else { + /* according to vendor driver, this bit must be always set */ + val = SUN4I_TCON1_IO_POL_UNKNOWN; + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + val |= SUN4I_TCON1_IO_POL_HSYNC_POSITIVE; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + val |= SUN4I_TCON1_IO_POL_VSYNC_POSITIVE; + + regmap_write(tcon->regs, SUN4I_TCON1_IO_POL_REG, val); + } + /* Map output pins to channel 1 */ regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG, SUN4I_TCON_GCTL_IOMAP_MASK, @@ -1517,6 +1541,7 @@ static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = { static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = { .has_channel_1 = true, + .polarity_in_ch0 = true, .set_mux = sun8i_r40_tcon_tv_set_mux, }; diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h index cfbf4e6c1679..ee555318e3c2 100644 --- a/drivers/gpu/drm/sun4i/sun4i_tcon.h +++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h @@ -153,6 +153,11 @@ #define SUN4I_TCON1_BASIC5_V_SYNC(height) (((height) - 1) & 0x3ff) #define SUN4I_TCON1_IO_POL_REG 0xf0 +/* there is no documentation about this bit */ +#define SUN4I_TCON1_IO_POL_UNKNOWN BIT(26) +#define SUN4I_TCON1_IO_POL_HSYNC_POSITIVE BIT(25) +#define SUN4I_TCON1_IO_POL_VSYNC_POSITIVE BIT(24) + #define SUN4I_TCON1_IO_TRI_REG 0xf4 #define SUN4I_TCON_ECC_FIFO_REG 0xf8 @@ -235,6 +240,7 @@ struct sun4i_tcon_quirks { bool needs_de_be_mux; /* sun6i needs mux to select backend */ bool needs_edp_reset; /* a80 edp reset needed for tcon0 access */ bool supports_lvds; /* Does the TCON support an LVDS output? */ + bool polarity_in_ch0; /* some tcon1 channels have polarity bits in tcon0 pol register */ u8 dclk_min_div; /* minimum divider for TCON0 DCLK */ /* callback to handle tcon muxing options */ |