Merge tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki: "These are ARM cpufreq updates and operating performance points (OPP) updates plus one cpuidle update adding a new trace point. Specifics: - Fix return error code in mtk_cpu_dvfs_info_init (Yang Yingliang). - Minor cleanups and support for new boards for Qcom cpufreq drivers (Bryan O'Donoghue, Konrad Dybcio, Pierre Gondois, and Yicong Yang). - Fix sparse warnings for Tegra cpufreq driver (Viresh Kumar). - Make dev_pm_opp_set_regulators() accept NULL terminated list (Viresh Kumar). - Add dev_pm_opp_set_config() and friends and migrate other users and helpers to using them (Viresh Kumar). - Add support for multiple clocks for a device (Viresh Kumar and Krzysztof Kozlowski). - Configure resources before adding OPP table for Venus (Stanimir Varbanov). - Keep reference count up for opp->np and opp_table->np while they are still in use (Liang He). - Minor OPP cleanups (Viresh Kumar and Yang Li). - Add a trace event for cpuidle to track missed (too deep or too shallow) wakeups (Kajetan Puchalski)" * tag 'pm-5.20-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (55 commits) cpuidle: Add cpu_idle_miss trace event venus: pm_helpers: Fix warning in OPP during probe OPP: Don't drop opp->np reference while it is still in use OPP: Don't drop opp_table->np reference while it is still in use cpufreq: tegra194: Staticize struct tegra_cpufreq_soc instances dt-bindings: cpufreq: cpufreq-qcom-hw: Add SM6375 compatible dt-bindings: opp: Add msm8939 to the compatible list dt-bindings: opp: Add missing compat devices dt-bindings: opp: opp-v2-kryo-cpu: Fix example binding checks cpufreq: Change order of online() CB and policy->cpus modification cpufreq: qcom-hw: Remove deprecated irq_set_affinity_hint() call cpufreq: qcom-hw: Disable LMH irq when disabling policy cpufreq: qcom-hw: Reset cancel_throttle when policy is re-enabled cpufreq: qcom-cpufreq-hw: use HZ_PER_KHZ macro in units.h cpufreq: mediatek: fix error return code in mtk_cpu_dvfs_info_init() OPP: Remove dev{m}_pm_opp_of_add_table_noclk() PM / devfreq: tegra30: Register config_clks helper OPP: Allow config_clks helper for single clk case OPP: Provide a simple implementation to configure multiple clocks OPP: Assert clk_count == 1 for single clk helpers ...
author: Linus Torvalds 2022-08-08 14:29:00 -0700
committer: Linus Torvalds 2022-08-08 14:29:00 -0700
commit: 507f811f205c17fd6f64e8d34d4bf91cd01b07a2 (patch)
tree: 72f4abfa45964c4cb4f06cdaaf463fd84e5e7581
parent: 033c88d58b66a5bf61a9a4f0029c4fb771f0555e (diff)
parent: c3f834df191ac2e5e58c215b9110e7e19553100f (diff)
33 files changed, 1418 insertions, 1282 deletions
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
index 2f1b8b6852a0..24fa3d87a40b 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml
@@ -25,6 +25,7 @@ properties:
       - description: v2 of CPUFREQ HW (EPSS)
         items:
           - enum:
+              - qcom,sm6375-cpufreq-epss
               - qcom,sm8250-cpufreq-epss
           - const: qcom,cpufreq-epss
 
diff --git a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
index 10b3a7a4af36..a11e1b867379 100644
--- a/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
+++ b/Documentation/devicetree/bindings/cpufreq/qcom-cpufreq-nvmem.yaml
@@ -22,6 +22,13 @@ select:
     compatible:
       contains:
         enum:
+          - qcom,apq8064
+          - qcom,apq8096
+          - qcom,ipq8064
+          - qcom,msm8939
+          - qcom,msm8960
+          - qcom,msm8974
+          - qcom,msm8996
           - qcom,qcs404
   required:
     - compatible
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
index 76c8acd981b3..66d0ec763f0b 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -50,6 +50,16 @@ patternProperties:
           property to uniquely identify the OPP nodes exists. Devices like power
           domains must have another (implementation dependent) property.
 
+          Entries for multiple clocks shall be provided in the same field, as
+          array of frequencies.  The OPP binding doesn't provide any provisions
+          to relate the values to their clocks or the order in which the clocks
+          need to be configured and that is left for the implementation
+          specific binding.
+        minItems: 1
+        maxItems: 16
+        items:
+          maxItems: 1
+
       opp-microvolt:
         description: |
           Voltage for the OPP
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
index 30f7b596d609..59663e897dae 100644
--- a/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
+++ b/Documentation/devicetree/bindings/opp/opp-v2-kryo-cpu.yaml
@@ -98,6 +98,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 0>;
                 operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_0>;
                 L2_0: l2-cache {
@@ -115,6 +117,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 0>;
                 operating-points-v2 = <&cluster0_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_0>;
             };
@@ -128,6 +132,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 1>;
                 operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_1>;
                 L2_1: l2-cache {
@@ -145,6 +151,8 @@ examples:
                 capacity-dmips-mhz = <1024>;
                 clocks = <&kryocc 1>;
                 operating-points-v2 = <&cluster1_opp>;
+                power-domains = <&cpr>;
+                power-domain-names = "cpr";
                 #cooling-cells = <2>;
                 next-level-cache = <&L2_1>;
             };
@@ -182,18 +190,21 @@ examples:
                 opp-microvolt = <905000 905000 1140000>;
                 opp-supported-hw = <0x7>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
             };
             opp-1401600000 {
                 opp-hz = /bits/ 64 <1401600000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x5>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp2>;
             };
             opp-1593600000 {
                 opp-hz = /bits/ 64 <1593600000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x1>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp3>;
             };
         };
 
@@ -207,24 +218,28 @@ examples:
                 opp-microvolt = <905000 905000 1140000>;
                 opp-supported-hw = <0x7>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp1>;
             };
             opp-1804800000 {
                 opp-hz = /bits/ 64 <1804800000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x6>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp4>;
             };
             opp-1900800000 {
                 opp-hz = /bits/ 64 <1900800000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x4>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp5>;
             };
             opp-2150400000 {
                 opp-hz = /bits/ 64 <2150400000>;
                 opp-microvolt = <1140000 905000 1140000>;
                 opp-supported-hw = <0x1>;
                 clock-latency-ns = <200000>;
+                required-opps = <&cpr_opp6>;
             };
         };
 
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index 8fcaba541539..d69d13a26414 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -29,9 +29,9 @@ struct private_data {
 
 	cpumask_var_t cpus;
 	struct device *cpu_dev;
-	struct opp_table *opp_table;
 	struct cpufreq_frequency_table *freq_table;
 	bool have_static_opps;
+	int opp_token;
 };
 
 static LIST_HEAD(priv_list);
@@ -193,7 +193,7 @@ static int dt_cpufreq_early_init(struct device *dev, int cpu)
 	struct private_data *priv;
 	struct device *cpu_dev;
 	bool fallback = false;
-	const char *reg_name;
+	const char *reg_name[] = { NULL, NULL };
 	int ret;
 
 	/* Check if this CPU is already covered by some other policy */
@@ -218,12 +218,11 @@ static int dt_cpufreq_early_init(struct device *dev, int cpu)
 	 * OPP layer will be taking care of regulators now, but it needs to know
 	 * the name of the regulator first.
 	 */
-	reg_name = find_supply_name(cpu_dev);
-	if (reg_name) {
-		priv->opp_table = dev_pm_opp_set_regulators(cpu_dev, &reg_name,
-							    1);
-		if (IS_ERR(priv->opp_table)) {
-			ret = PTR_ERR(priv->opp_table);
+	reg_name[0] = find_supply_name(cpu_dev);
+	if (reg_name[0]) {
+		priv->opp_token = dev_pm_opp_set_regulators(cpu_dev, reg_name);
+		if (priv->opp_token < 0) {
+			ret = priv->opp_token;
 			if (ret != -EPROBE_DEFER)
 				dev_err(cpu_dev, "failed to set regulators: %d\n",
 					ret);
@@ -295,7 +294,7 @@ static int dt_cpufreq_early_init(struct device *dev, int cpu)
 out:
 	if (priv->have_static_opps)
 		dev_pm_opp_of_cpumask_remove_table(priv->cpus);
-	dev_pm_opp_put_regulators(priv->opp_table);
+	dev_pm_opp_put_regulators(priv->opp_token);
 free_cpumask:
 	free_cpumask_var(priv->cpus);
 	return ret;
@@ -309,7 +308,7 @@ static void dt_cpufreq_release(void)
 		dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &priv->freq_table);
 		if (priv->have_static_opps)
 			dev_pm_opp_of_cpumask_remove_table(priv->cpus);
-		dev_pm_opp_put_regulators(priv->opp_table);
+		dev_pm_opp_put_regulators(priv->opp_token);
 		free_cpumask_var(priv->cpus);
 		list_del(&priv->node);
 	}
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 954eef26685f..7820c4e74289 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1348,15 +1348,15 @@ static int cpufreq_online(unsigned int cpu)
 	}
 
 	if (!new_policy && cpufreq_driver->online) {
+		/* Recover policy->cpus using related_cpus */
+		cpumask_copy(policy->cpus, policy->related_cpus);
+
 		ret = cpufreq_driver->online(policy);
 		if (ret) {
 			pr_debug("%s: %d: initialization failed\n", __func__,
 				 __LINE__);
 			goto out_exit_policy;
 		}
-
-		/* Recover policy->cpus using related_cpus */
-		cpumask_copy(policy->cpus, policy->related_cpus);
 	} else {
 		cpumask_copy(policy->cpus, cpumask_of(cpu));
 
diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c
index 3fe9125156b4..76e553af2071 100644
--- a/drivers/cpufreq/imx-cpufreq-dt.c
+++ b/drivers/cpufreq/imx-cpufreq-dt.c
@@ -31,8 +31,8 @@
 
 /* cpufreq-dt device registered by imx-cpufreq-dt */
 static struct platform_device *cpufreq_dt_pdev;
-static struct opp_table *cpufreq_opp_table;
 static struct device *cpu_dev;
+static int cpufreq_opp_token;
 
 enum IMX7ULP_CPUFREQ_CLKS {
 	ARM,
@@ -153,9 +153,9 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n",
 			speed_grade, mkt_segment, supported_hw[0], supported_hw[1]);
 
-	cpufreq_opp_table = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2);
-	if (IS_ERR(cpufreq_opp_table)) {
-		ret = PTR_ERR(cpufreq_opp_table);
+	cpufreq_opp_token = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2);
+	if (cpufreq_opp_token < 0) {
+		ret = cpufreq_opp_token;
 		dev_err(&pdev->dev, "Failed to set supported opp: %d\n", ret);
 		return ret;
 	}
@@ -163,7 +163,7 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev)
 	cpufreq_dt_pdev = platform_device_register_data(
 			&pdev->dev, "cpufreq-dt", -1, NULL, 0);
 	if (IS_ERR(cpufreq_dt_pdev)) {
-		dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+		dev_pm_opp_put_supported_hw(cpufreq_opp_token);
 		ret = PTR_ERR(cpufreq_dt_pdev);
 		dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
 		return ret;
@@ -176,7 +176,7 @@ static int imx_cpufreq_dt_remove(struct platform_device *pdev)
 {
 	platform_device_unregister(cpufreq_dt_pdev);
 	if (!of_machine_is_compatible("fsl,imx7ulp"))
-		dev_pm_opp_put_supported_hw(cpufreq_opp_table);
+		dev_pm_opp_put_supported_hw(cpufreq_opp_token);
 	else
 		clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
 
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 76f6b3884e6b..7f2680bc9a0f 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -478,6 +478,7 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
 	if (info->soc_data->ccifreq_supported) {
 		info->vproc_on_boot = regulator_get_voltage(info->proc_reg);
 		if (info->vproc_on_boot < 0) {
+			ret = info->vproc_on_boot;
 			dev_err(info->cpu_dev,
 				"invalid Vproc value: %d\n", info->vproc_on_boot);
 			goto out_disable_inter_clock;
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 36c79580fba2..d5ef3c66c762 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -15,6 +15,7 @@
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
 #include <linux/spinlock.h>
+#include <linux/units.h>
 
 #define LUT_MAX_ENTRIES			40U
 #define LUT_SRC				GENMASK(31, 30)
@@ -26,8 +27,6 @@
 
 #define GT_IRQ_STATUS			BIT(2)
 
-#define HZ_PER_KHZ			1000
-
 struct qcom_cpufreq_soc_data {
 	u32 reg_enable;
 	u32 reg_domain_state;
@@ -428,7 +427,7 @@ static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
 		return 0;
 	}
 
-	ret = irq_set_affinity_hint(data->throttle_irq, policy->cpus);
+	ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus);
 	if (ret)
 		dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n",
 			data->irq_name, data->throttle_irq);
@@ -445,7 +444,11 @@ static int qcom_cpufreq_hw_cpu_online(struct cpufreq_policy *policy)
 	if (data->throttle_irq <= 0)
 		return 0;
 
-	ret = irq_set_affinity_hint(data->throttle_irq, policy->cpus);
+	mutex_lock(&data->throttle_lock);
+	data->cancel_throttle = false;
+	mutex_unlock(&data->throttle_lock);
+
+	ret = irq_set_affinity_and_hint(data->throttle_irq, policy->cpus);
 	if (ret)
 		dev_err(&pdev->dev, "Failed to set CPU affinity of %s[%d]\n",
 			data->irq_name, data->throttle_irq);
@@ -465,7 +468,8 @@ static int qcom_cpufreq_hw_cpu_offline(struct cpufreq_policy *policy)
 	mutex_unlock(&data->throttle_lock);
 
 	cancel_delayed_work_sync(&data->throttle_work);
-	irq_set_affinity_hint(data->throttle_irq, NULL);
+	irq_set_affinity_and_hint(data->throttle_irq, NULL);
+	disable_irq_nosync(data->throttle_irq);
 
 	return 0;
 }
diff --git a/drivers/cpufreq/qcom-cpufreq-nvmem.c b/drivers/cpufreq/qcom-cpufreq-nvmem.c
index 6dfa86971a75..863548f59c3e 100644
--- a/drivers/cpufreq/qcom-cpufreq-nvmem.c
+++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c
@@ -55,9 +55,7 @@ struct qcom_cpufreq_match_data {
 };
 
 struct qcom_cpufreq_drv {
-	struct opp_table **names_opp_tables;
-	struct opp_table **hw_opp_tables;
-	struct opp_table **genpd_opp_tables;
+	int *opp_tokens;
 	u32 versions;
 	const struct qcom_cpufreq_match_data *data;
 };
@@ -315,72 +313,43 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	}
 	of_node_put(np);
 
-	drv->names_opp_tables = kcalloc(num_possible_cpus(),
-				  sizeof(*drv->names_opp_tables),
+	drv->opp_tokens = kcalloc(num_possible_cpus(), sizeof(*drv->opp_tokens),
 				  GFP_KERNEL);
-	if (!drv->names_opp_tables) {
+	if (!drv->opp_tokens) {
 		ret = -ENOMEM;
 		goto free_drv;
 	}
-	drv->hw_opp_tables = kcalloc(num_possible_cpus(),
-				  sizeof(*drv->hw_opp_tables),
-				  GFP_KERNEL);
-	if (!drv->hw_opp_tables) {
-		ret = -ENOMEM;
-		goto free_opp_names;
-	}
-
-	drv->genpd_opp_tables = kcalloc(num_possible_cpus(),
-					sizeof(*drv->genpd_opp_tables),
-					GFP_KERNEL);
-	if (!drv->genpd_opp_tables) {
-		ret = -ENOMEM;
-		goto free_opp;
-	}
 
 	for_each_possible_cpu(cpu) {
+		struct dev_pm_opp_config config = {
+			.supported_hw = NULL,
+		};
+
 		cpu_dev = get_cpu_device(cpu);
 		if (NULL == cpu_dev) {
 			ret = -ENODEV;
-			goto free_genpd_opp;
+			goto free_opp;
 		}
 
 		if (drv->data->get_version) {
+			config.supported_hw = &drv->versions;
+			config.supported_hw_count = 1;
 
-			if (pvs_name) {
-				drv->names_opp_tables[cpu] = dev_pm_opp_set_prop_name(
-								     cpu_dev,
-								     pvs_name);
-				if (IS_ERR(drv->names_opp_tables[cpu])) {
-					ret = PTR_ERR(drv->names_opp_tables[cpu]);
-					dev_err(cpu_dev, "Failed to add OPP name %s\n",
-						pvs_name);
-					goto free_opp;
-				}
-			}
-
-			drv->hw_opp_tables[cpu] = dev_pm_opp_set_supported_hw(
-									 cpu_dev, &drv->versions, 1);
-			if (IS_ERR(drv->hw_opp_tables[cpu])) {
-				ret = PTR_ERR(drv->hw_opp_tables[cpu]);
-				dev_err(cpu_dev,
-					"Failed to set supported hardware\n");
-				goto free_genpd_opp;
-			}
+			if (pvs_name)
+				config.prop_name = pvs_name;
 		}
 
 		if (drv->data->genpd_names) {
-			drv->genpd_opp_tables[cpu] =
-				dev_pm_opp_attach_genpd(cpu_dev,
-							drv->data->genpd_names,
-							NULL);
-			if (IS_ERR(drv->genpd_opp_tables[cpu])) {
-				ret = PTR_ERR(drv->genpd_opp_tables[cpu]);
-				if (ret != -EPROBE_DEFER)
-					dev_err(cpu_dev,
-						"Could not attach to pm_domain: %d\n",
-						ret);
-				goto free_genpd_opp;
+			config.genpd_names = drv->data->genpd_names;
+			config.virt_devs = NULL;
+		}
+
+		if (config.supported_hw || config.genpd_names) {
+			drv->opp_tokens[cpu] = dev_pm_opp_set_config(cpu_dev, &config);
+			if (drv->opp_tokens[cpu] < 0) {
+				ret = drv->opp_tokens[cpu];
+				dev_err(cpu_dev, "Failed to set OPP config\n");
+				goto free_opp;
 			}
 		}
 	}
@@ -395,27 +364,10 @@ static int qcom_cpufreq_probe(struct platform_device *pdev)
 	ret = PTR_ERR(cpufreq_dt_pdev);
 	dev_err(cpu_dev, "Failed to register platform device\n");
 
-free_genpd_opp:
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR(drv->genpd_opp_tables[cpu]))
-			break;
-		dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
-	}
-	kfree(drv->genpd_opp_tables);
 free_opp:
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR(drv->names_opp_tables[cpu]))
-			break;
-		dev_pm_opp_put_prop_name(drv->names_opp_tables[cpu]);
-	}
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR(drv->hw_opp_tables[cpu]))
-			break;
-		dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
-	}
-	kfree(drv->hw_opp_tables);
-free_opp_names:
-	kfree(drv->names_opp_tables);
+	for_each_possible_cpu(cpu)
+		dev_pm_opp_clear_config(drv->opp_tokens[cpu]);
+	kfree(drv->opp_tokens);
 free_drv:
 	kfree(drv);
 
@@ -429,15 +381,10 @@ static int qcom_cpufreq_remove(struct platform_device *pdev)
 
 	platform_device_unregister(cpufreq_dt_pdev);
 
-	for_each_possible_cpu(cpu) {
-		dev_pm_opp_put_supported_hw(drv->names_opp_tables[cpu]);
-		dev_pm_opp_put_supported_hw(drv->hw_opp_tables[cpu]);
-		dev_pm_opp_detach_genpd(drv->genpd_opp_tables[cpu]);
-	}
+	for_each_possible_cpu(cpu)
+		dev_pm_opp_clear_config(drv->opp_tokens[cpu]);
 
-	kfree(drv->names_opp_tables);
-	kfree(drv->hw_opp_tables);
-	kfree(drv->genpd_opp_tables);
+	kfree(drv->opp_tokens);
 	kfree(drv);
 
 	return 0;
diff --git a/drivers/cpufreq/sti-cpufreq.c b/drivers/cpufreq/sti-cpufreq.c
index fdb0a722d881..a67df90848c2 100644
--- a/drivers/cpufreq/sti-cpufreq.c
+++ b/drivers/cpufreq/sti-cpufreq.c
@@ -156,9 +156,13 @@ static int sti_cpufreq_set_opp_info(void)
 	unsigned int hw_info_offset;
 	unsigned int version[VERSION_ELEMENTS];
 	int pcode, substrate, major, minor;
-	int ret;
+	int opp_token, ret;
 	char name[MAX_PCODE_NAME_LEN];
-	struct opp_table *opp_table;
+	struct dev_pm_opp_config config = {
+		.supported_hw = version,
+		.supported_hw_count = ARRAY_SIZE(version),
+		.prop_name = name,
+	};
 
 	reg_fields = sti_cpufreq_match();
 	if (!reg_fields) {
@@ -210,21 +214,14 @@ use_defaults:
 
 	snprintf(name, MAX_PCODE_NAME_LEN, "pcode%d", pcode);
 
-	opp_table = dev_pm_opp_set_prop_name(dev, name);
-	if (IS_ERR(opp_table)) {
-		dev_err(dev, "Failed to set prop name\n");
-		return PTR_ERR(opp_table);
-	}
-
 	version[0] = BIT(major);
 	version[1] = BIT(minor);
 	version[2] = BIT(substrate);
 
-	opp_table = dev_pm_opp_set_supported_hw(dev, version, VERSION_ELEMENTS);
-	if (IS_ERR(opp_table)) {
-		dev_err(dev, "Failed to set supported hardware\n");
-		ret = PTR_ERR(opp_table);
-		goto err_put_prop_name;
+	opp_token = dev_pm_opp_set_config(dev, &config);
+	if (opp_token < 0) {
+		dev_err(dev, "Failed to set OPP config\n");
+		return opp_token;
 	}
 
 	dev_dbg(dev, "pcode: %d major: %d minor: %d substrate: %d\n",
@@ -233,10 +230,6 @@ use_defaults:
 		version[0], version[1], version[2]);
 
 	return 0;
-
-err_put_prop_name:
-	dev_pm_opp_put_prop_name(opp_table);
-	return ret;
 }
 
 static int sti_cpufreq_fetch_syscon_registers(void)
diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
index 75e1bf3a08f7..a4922580ce06 100644
--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
@@ -86,20 +86,20 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
 
 static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
 {
-	struct opp_table **opp_tables;
+	int *opp_tokens;
 	char name[MAX_NAME_LEN];
 	unsigned int cpu;
 	u32 speed = 0;
 	int ret;
 
-	opp_tables = kcalloc(num_possible_cpus(), sizeof(*opp_tables),
+	opp_tokens = kcalloc(num_possible_cpus(), sizeof(*opp_tokens),
 			     GFP_KERNEL);
-	if (!opp_tables)
+	if (!opp_tokens)
 		return -ENOMEM;
 
 	ret = sun50i_cpufreq_get_efuse(&speed);
 	if (ret) {
-		kfree(opp_tables);
+		kfree(opp_tokens);
 		return ret;
 	}
 
@@ -113,9 +113,9 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
 			goto free_opp;
 		}
 
-		opp_tables[cpu] = dev_pm_opp_set_prop_name(cpu_dev, name);
-		if (IS_ERR(opp_tables[cpu])) {
-			ret = PTR_ERR(opp_tables[cpu]);
+		opp_tokens[cpu] = dev_pm_opp_set_prop_name(cpu_dev, name);
+		if (opp_tokens[cpu] < 0) {
+			ret = opp_tokens[cpu];
 			pr_err("Failed to set prop name\n");
 			goto free_opp;
 		}
@@ -124,7 +124,7 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
 	cpufreq_dt_pdev = platform_device_register_simple("cpufreq-dt", -1,
 							  NULL, 0);
 	if (!IS_ERR(cpufreq_dt_pdev)) {
-		platform_set_drvdata(pdev, opp_tables);
+		platform_set_drvdata(pdev, opp_tokens);
 		return 0;
 	}
 
@@ -132,27 +132,24 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
 	pr_err("Failed to register platform device\n");
 
 free_opp:
-	for_each_possible_cpu(cpu) {
-		if (IS_ERR_OR_NULL(opp_tables[cpu]))
-			break;
-		dev_pm_opp_put_prop_name(opp_tables[cpu]);
-	}
-	kfree(opp_tables);
+	for_each_possible_cpu(cpu)
+		dev_pm_opp_put_prop_name(opp_tokens[cpu]);
+	kfree(opp_tokens);
 
 	return ret;
 }
 
 static int sun50i_cpufreq_nvmem_remove(struct platform_device *pdev)
 {
-	struct opp_table **opp_tables = platform_get_drvdata(pdev);
+	int *opp_tokens = platform_get_drvdata(pdev);
 	unsigned int cpu;
 
 	platform_device_unregister(cpufreq_dt_pdev);
 
 	for_each_possible_cpu(cpu)
-		dev_pm_opp_put_prop_name(opp_tables[cpu]);
+		dev_pm_opp_put_prop_name(opp_tokens[cpu]);
 
-	kfree(opp_tables);
+	kfree(opp_tokens);
 
 	return 0;
 }
diff --git a/drivers/cpufreq/tegra194-cpufreq.c b/drivers/cpufreq/tegra194-cpufreq.c
index 2a6a98764a8c..1216046cf4c2 100644
--- a/drivers/cpufreq/tegra194-cpufreq.c
+++ b/drivers/cpufreq/tegra194-cpufreq.c
@@ -162,7 +162,7 @@ static struct tegra_cpufreq_ops tegra234_cpufreq_ops = {
 	.set_cpu_ndiv = tegra234_set_cpu_ndiv,
 };
 
-const struct tegra_cpufreq_soc tegra234_cpufreq_soc = {
+static const struct tegra_cpufreq_soc tegra234_cpufreq_soc = {
 	.ops = &tegra234_cpufreq_ops,
 	.actmon_cntr_base = 0x9000,
 	.maxcpus_per_cluster = 4,
@@ -430,7 +430,7 @@ static struct tegra_cpufreq_ops tegra194_cpufreq_ops = {
 	.set_cpu_ndiv = tegra194_set_cpu_ndiv,
 };
 
-const struct tegra_cpufreq_soc tegra194_cpufreq_soc = {
+static const struct tegra_cpufreq_soc tegra194_cpufreq_soc = {
 	.ops = &tegra194_cpufreq_ops,
 	.maxcpus_per_cluster = 2,
 };
diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c
index e8db3d75be25..ab7ac7df9e62 100644
--- a/drivers/cpufreq/tegra20-cpufreq.c
+++ b/drivers/cpufreq/tegra20-cpufreq.c
@@ -32,9 +32,9 @@ static bool cpu0_node_has_opp_v2_prop(void)
 	return ret;
 }
 
-static void tegra20_cpufreq_put_supported_hw(void *opp_table)
+static void tegra20_cpufreq_put_supported_hw(void *opp_token)
 {
-	dev_pm_opp_put_supported_hw(opp_table);
+	dev_pm_opp_put_supported_hw((unsigned long) opp_token);
 }
 
 static void tegra20_cpufreq_dt_unregister(void *cpufreq_dt)
@@ -45,7 +45,6 @@ static void tegra20_cpufreq_dt_unregister(void *cpufreq_dt)
 static int tegra20_cpufreq_probe(struct platform_device *pdev)
 {
 	struct platform_device *cpufreq_dt;
-	struct opp_table *opp_table;
 	struct device *cpu_dev;
 	u32 versions[2];
 	int err;
@@ -71,16 +70,15 @@ static int tegra20_cpufreq_probe(struct platform_device *pdev)
 	if (WARN_ON(!cpu_dev))
 		return -ENODEV;
 
-	opp_table = dev_pm_opp_set_supported_hw(cpu_dev, versions, 2);
-	err = PTR_ERR_OR_ZERO(opp_table);
-	if (err) {
+	err = dev_pm_opp_set_supported_hw(cpu_dev, versions, 2);
+	if (err < 0) {
 		dev_err(&pdev->dev, "failed to set supported hw: %d\n", err);
 		return err;
 	}
 
 	err = devm_add_action_or_reset(&pdev->dev,
 				       tegra20_cpufreq_put_supported_hw,
-				       opp_table);
+				       (void *)((unsigned long) err));
 	if (err)
 		return err;
 
diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c
index 8f9fdd864391..df85a77d476b 100644
--- a/drivers/cpufreq/ti-cpufreq.c
+++ b/drivers/cpufreq/ti-cpufreq.c
@@ -60,7 +60,6 @@ struct ti_cpufreq_data {
 	struct device_node *opp_node;
 	struct regmap *syscon;
 	const struct ti_cpufreq_soc_data *soc_data;
-	struct opp_table *opp_table;
 };
 
 static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data,
@@ -173,7 +172,7 @@ static struct ti_cpufreq_soc_data omap34xx_soc_data = {
  *    seems to always read as 0).
  */
 
-static const char * const omap3_reg_names[] = {"cpu0", "vbb"};
+static const char * const omap3_reg_names[] = {"cpu0", "vbb", NULL};
 
 static struct ti_cpufreq_soc_data omap36xx_soc_data = {
 	.reg_names = omap3_reg_names,
@@ -324,10 +323,13 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
 {
 	u32 version[VERSION_COUNT];
 	const struct of_device_id *match;
-	struct opp_table *ti_opp_table;
 	struct ti_cpufreq_data *opp_data;
-	const char * const default_reg_names[] = {"vdd", "vbb"};
+	const char * const default_reg_names[] = {"vdd", "vbb", NULL};
 	int ret;
+	struct dev_pm_opp_config config = {
+		.supported_hw = version,
+		.supported_hw_count = ARRAY_SIZE(version),
+	};
 
 	match = dev_get_platdata(&pdev->dev);
 	if (!match)
@@ -370,33 +372,21 @@ static int ti_cpufreq_probe(struct platform_device *pdev)
 	if (ret)
 		goto fail_put_node;
 
-	ti_opp_table = dev_pm_opp_set_supported_hw(opp_data->cpu_dev,
-						   version, VERSION_COUNT);
-	if (IS_ERR(ti_opp_table)) {
-		dev_err(opp_data->cpu_dev,
-			"Failed to set supported hardware\n");
-		ret = PTR_ERR(ti_opp_table);
-		goto fail_put_node;
-	}
-
-	opp_data->opp_table = ti_opp_table;
-
 	if (opp_data->soc_data->multi_regulator) {
-		const char * const *reg_names = default_reg_names;
-
 		if (opp_data->soc_data->reg_names)
-			reg_names = opp_data->soc_data->reg_names;
-		ti_opp_table = dev_pm_opp_set_regulators(opp_data->cpu_dev,
-							 reg_names,
-							 ARRAY_SIZE(default_reg_names));
-		if (IS_ERR(ti_opp_table)) {
-			dev_pm_opp_put_supported_hw(opp_data->opp_table);
-			ret =  PTR_ERR(ti_opp_table);
-			goto fail_put_node;
-		}
+			config.regulator_names = opp_data->soc_data->reg_names;
+		else
+			config.regulator_names = default_reg_names;
+	}
+
+	ret = dev_pm_opp_set_config(opp_data->cpu_dev, &config);
+	if (ret < 0) {
+		dev_err(opp_data->cpu_dev, "Failed to set OPP config\n");
+		goto fail_put_node;
 	}
 
 	of_node_put(opp_data->opp_node);
+
 register_cpufreq_dt:
 	platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
 
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index 62dd956025f3..6eceb1988243 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -8,6 +8,7 @@
  * This code is licenced under the GPL.
  */
 
+#include "linux/percpu-defs.h"
 #include <linux/clockchips.h>
 #include <linux/kernel.h>
 #include <linux/mutex.h>
@@ -279,6 +280,7 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 
 				/* Shallower states are enabled, so update. */
 				dev->states_usage[entered_state].above++;
+				trace_cpu_idle_miss(dev->cpu, entered_state, false);
 				break;
 			}
 		} else if (diff > delay) {
@@ -290,8 +292,10 @@ int cpuidle_enter_state(struct cpuidle_device *dev, struct cpuidle_driver *drv,
 				 * Update if a deeper state would have been a
 				 * better match for the observed idle duration.
 				 */
-				if (diff - delay >= drv->states[i].target_residency_ns)
+				if (diff - delay >= drv->states[i].target_residency_ns) {
 					dev->states_usage[entered_state].below++;
+					trace_cpu_idle_miss(dev->cpu, entered_state, true);
+				}
 
 				break;
 			}
diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index f7dcc44f9414..027e8f336acc 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -33,7 +33,7 @@ struct exynos_bus {
 
 	unsigned long curr_freq;
 
-	struct opp_table *opp_table;
+	int opp_token;
 	struct clk *clk;
 	unsigned int ratio;
 };
@@ -161,8 +161,7 @@ static void exynos_bus_exit(struct device *dev)
 
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
-	dev_pm_opp_put_regulators(bus->opp_table);
-	bus->opp_table = NULL;
+	dev_pm_opp_put_regulators(bus->opp_token);
 }
 
 static void exynos_bus_passive_exit(struct device *dev)
@@ -179,18 +178,16 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
 					struct exynos_bus *bus)
 {
 	struct device *dev = bus->dev;
-	struct opp_table *opp_table;
-	const char *vdd = "vdd";
+	const char *supplies[] = { "vdd", NULL };
 	int i, ret, count, size;
 
-	opp_table = dev_pm_opp_set_regulators(dev, &vdd, 1);
-	if (IS_ERR(opp_table)) {
-		ret = PTR_ERR(opp_table);
+	ret = dev_pm_opp_set_regulators(dev, supplies);
+	if (ret < 0) {
 		dev_err(dev, "failed to set regulators %d\n", ret);
 		return ret;
 	}
 
-	bus->opp_table = opp_table;
+	bus->opp_token = ret;
 
 	/*
 	 * Get the devfreq-event devices to get the current utilization of
@@ -236,8 +233,7 @@ static int exynos_bus_parent_parse_of(struct device_node *np,
 	return 0;
 
 err_regulator:
-	dev_pm_opp_put_regulators(bus->opp_table);
-	bus->opp_table = NULL;
+	dev_pm_opp_put_regulators(bus->opp_token);
 
 	return ret;
 }
@@ -459,8 +455,7 @@ err:
 	dev_pm_opp_of_remove_table(dev);
 	clk_disable_unprepare(bus->clk);
 err_reg:
-	dev_pm_opp_put_regulators(bus->opp_table);
-	bus->opp_table = NULL;
+	dev_pm_opp_put_regulators(bus->opp_token);
 
 	return ret;
 }
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 585a95fe2bd6..503376b894b6 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -821,6 +821,15 @@ static int devm_tegra_devfreq_init_hw(struct device *dev,
 	return err;
 }
 
+static int tegra_devfreq_config_clks_nop(struct device *dev,
+					 struct opp_table *opp_table,
+					 struct dev_pm_opp *opp, void *data,
+					 bool scaling_down)
+{
+	/* We want to skip clk configuration via dev_pm_opp_set_opp() */
+	return 0;
+}
+
 static int tegra_devfreq_probe(struct platform_device *pdev)
 {
 	u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
@@ -830,6 +839,13 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 	unsigned int i;
 	long rate;
 	int err;
+	const char *clk_names[] = { "actmon", NULL };
+	struct dev_pm_opp_config config = {
+		.supported_hw = &hw_version,
+		.supported_hw_count = 1,
+		.clk_names = clk_names,
+		.config_clks = tegra_devfreq_config_clks_nop,
+	};
 
 	tegra = devm_kzalloc(&pdev->dev, sizeof(*tegra), GFP_KERNEL);
 	if (!tegra)
@@ -874,13 +890,13 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	err = devm_pm_opp_set_supported_hw(&pdev->dev, &hw_version, 1);
+	err = devm_pm_opp_set_config(&pdev->dev, &config);
 	if (err) {
-		dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err);
+		dev_err(&pdev->dev, "Failed to set OPP config: %d\n", err);
 		return err;
 	}
 
-	err = devm_pm_opp_of_add_table_noclk(&pdev->dev, 0);
+	err = devm_pm_opp_of_add_table_indexed(&pdev->dev, 0);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err);
 		return err;
diff --git a/drivers/gpu/drm/lima/lima_devfreq.c b/drivers/gpu/drm/lima/lima_devfreq.c
index 8989e215dfc9..011be7ff51e1 100644
--- a/drivers/gpu/drm/lima/lima_devfreq.c
+++ b/drivers/gpu/drm/lima/lima_devfreq.c
@@ -111,6 +111,12 @@ int lima_devfreq_init(struct lima_device *ldev)
 	struct dev_pm_opp *opp;
 	unsigned long cur_freq;
 	int ret;
+	const char *regulator_names[] = { "mali", NULL };
+	const char *clk_names[] = { "core", NULL };
+	struct dev_pm_opp_config config = {
+		.regulator_names = regulator_names,
+		.clk_names = clk_names,
+	};
 
 	if (!device_property_present(dev, "operating-points-v2"))
 		/* Optional, continue without devfreq */
@@ -118,11 +124,7 @@ int lima_devfreq_init(struct lima_device *ldev)
 
 	spin_lock_init(&ldevfreq->lock);
 
-	ret = devm_pm_opp_set_clkname(dev, "core");
-	if (ret)
-		return ret;
-
-	ret = devm_pm_opp_set_regulators(dev, (const char *[]){ "mali" }, 1);
+	ret = devm_pm_opp_set_config(dev, &config);
 	if (ret) {
 		/* Continue if the optional regulator is missing */
 		if (ret != -ENODEV)
diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
index 194af7f607a6..5110cd9b2425 100644
--- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c
+++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c
@@ -101,8 +101,7 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev)
 		return 0;
 	}
 
-	ret = devm_pm_opp_set_regulators(dev, pfdev->comp->supply_names,
-					 pfdev->comp->num_supplies);
+	ret = devm_pm_opp_set_regulators(dev, pfdev->comp->supply_names);
 	if (ret) {
 		/* Continue if the optional regulator is missing */
 		if (ret != -ENODEV) {
diff --git a/drivers/gpu/drm/panfrost/panfrost_drv.c b/drivers/gpu/drm/panfrost/panfrost_drv.c
index 2d870cf73b07..2fa5afe21288 100644
--- a/drivers/gpu/drm/panfrost/panfrost_drv.c
+++ b/drivers/gpu/drm/panfrost/panfrost_drv.c
@@ -626,24 +626,29 @@ static int panfrost_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const char * const default_supplies[] = { "mali" };
+/*
+ * The OPP core wants the supply names to be NULL terminated, but we need the
+ * correct num_supplies value for regulator core. Hence, we NULL terminate here
+ * and then initialize num_supplies with ARRAY_SIZE - 1.
+ */
+static const char * const default_supplies[] = { "mali", NULL };
 static const struct panfrost_compatible default_data = {
-	.num_supplies = ARRAY_SIZE(default_supplies),
+	.num_supplies = ARRAY_SIZE(default_supplies) - 1,
 	.supply_names = default_supplies,
 	.num_pm_domains = 1, /* optional */
 	.pm_domain_names = NULL,
 };
 
 static const struct panfrost_compatible amlogic_data = {
-	.num_supplies = ARRAY_SIZE(default_supplies),
+	.num_supplies = ARRAY_SIZE(default_supplies) - 1,
 	.supply_names = default_supplies,
 	.vendor_quirk = panfrost_gpu_amlogic_quirk,
 };
 
-static const char * const mediatek_mt8183_supplies[] = { "mali", "sram" };
+static const char * const mediatek_mt8183_supplies[] = { "mali", "sram", NULL };
 static const char * const mediatek_mt8183_pm_domains[] = { "core0", "core1", "core2" };
 static const struct panfrost_compatible mediatek_mt8183_data = {
-	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies),
+	.num_supplies = ARRAY_SIZE(mediatek_mt8183_supplies) - 1,
 	.supply_names = mediatek_mt8183_supplies,
 	.num_pm_domains = ARRAY_SIZE(mediatek_mt8183_pm_domains),
 	.pm_domain_names = mediatek_mt8183_pm_domains,
diff --git a/drivers/media/platform/qcom/venus/pm_helpers.c b/drivers/media/platform/qcom/venus/pm_helpers.c
index cb48c5ff3dee..c93d2906e4c7 100644
--- a/drivers/media/platform/qcom/venus/pm_helpers.c
+++ b/drivers/media/platform/qcom/venus/pm_helpers.c
@@ -875,7 +875,7 @@ static int vcodec_domains_get(struct venus_core *core)
 	}
 
 skip_pmdomains:
-	if (!core->has_opp_table)
+	if (!core->res->opp_pmdomain)
 		return 0;
 
 	/* Attach the power domain for setting performance state */
@@ -1007,6 +1007,10 @@ static int core_get_v4(struct venus_core *core)
 	if (ret)
 		return ret;
 
+	ret = vcodec_domains_get(core);
+	if (ret)
+		return ret;
+
 	if (core->res->opp_pmdomain) {
 		ret = devm_pm_opp_of_add_table(dev);
 		if (!ret) {
@@ -1017,10 +1021,6 @@ static int core_get_v4(struct venus_core *core)
 		}
 	}
 
-	ret = vcodec_domains_get(core);
-	if (ret)
-		return ret;
-
 	return 0;
 }
 
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 908f8d5392b2..85bc936c02f9 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -1395,15 +1395,14 @@ err_msg:
 static int tegra_emc_opp_table_init(struct tegra_emc *emc)
 {
 	u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
-	struct opp_table *hw_opp_table;
-	int err;
+	int opp_token, err;
 
-	hw_opp_table = dev_pm_opp_set_supported_hw(emc->dev, &hw_version, 1);
-	err = PTR_ERR_OR_ZERO(hw_opp_table);
-	if (err) {
+	err = dev_pm_opp_set_supported_hw(emc->dev, &hw_version, 1);
+	if (err < 0) {
 		dev_err(emc->dev, "failed to set OPP supported HW: %d\n", err);
 		return err;
 	}
+	opp_token = err;
 
 	err = dev_pm_opp_of_add_table(emc->dev);
 	if (err) {
@@ -1430,7 +1429,7 @@ static int tegra_emc_opp_table_init(struct tegra_emc *emc)
 remove_table:
 	dev_pm_opp_of_remove_table(emc->dev);
 put_hw_table:
-	dev_pm_opp_put_supported_hw(hw_opp_table);
+	dev_pm_opp_put_supported_hw(opp_token);
 
 	return err;
 }
diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 84063eaebb91..77d1ba3a4154 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -13,11 +13,12 @@
 #include <linux/clk.h>
 #include <linux/errno.h>
 #include <linux/err.h>
-#include <linux/slab.h>
 #include <linux/device.h>
 #include <linux/export.h>
 #include <linux/pm_domain.h>
 #include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/xarray.h>
 
 #include "opp.h"
 
@@ -36,6 +37,9 @@ DEFINE_MUTEX(opp_table_lock);
 /* Flag indicating that opp_tables list is being updated at the moment */
 static bool opp_tables_busy;
 
+/* OPP ID allocator */
+static DEFINE_XARRAY_ALLOC1(opp_configs);
+
 static bool _find_opp_dev(const struct device *dev, struct opp_table *opp_table)
 {
 	struct opp_device *opp_dev;
@@ -93,6 +97,18 @@ struct opp_table *_find_opp_table(struct device *dev)
 	return opp_table;
 }
 
+/*
+ * Returns true if multiple clocks aren't there, else returns false with WARN.
+ *
+ * We don't force clk_count == 1 here as there are users who don't have a clock
+ * representation in the OPP table and manage the clock configuration themselves
+ * in an platform specific way.
+ */
+static bool assert_single_clk(struct opp_table *opp_table)
+{
+	return !WARN_ON(opp_table->clk_count > 1);
+}
+
 /**
  * dev_pm_opp_get_voltage() - Gets the voltage corresponding to an opp
  * @opp:	opp for which voltage has to be returned for
@@ -114,6 +130,31 @@ unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_voltage);
 
 /**
+ * dev_pm_opp_get_supplies() - Gets the supply information corresponding to an opp
+ * @opp:	opp for which voltage has to be returned for
+ * @supplies:	Placeholder for copying the supply information.
+ *
+ * Return: negative error number on failure, 0 otherwise on success after
+ * setting @supplies.
+ *
+ * This can be used for devices with any number of power supplies. The caller
+ * must ensure the @supplies array must contain space for each regulator.
+ */
+int dev_pm_opp_get_supplies(struct dev_pm_opp *opp,
+			    struct dev_pm_opp_supply *supplies)
+{
+	if (IS_ERR_OR_NULL(opp) || !supplies) {
+		pr_err("%s: Invalid parameters\n", __func__);
+		return -EINVAL;
+	}
+
+	memcpy(supplies, opp->supplies,
+	       sizeof(*supplies) * opp->opp_table->regulator_count);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_get_supplies);
+
+/**
  * dev_pm_opp_get_power() - Gets the power corresponding to an opp
  * @opp:	opp for which power has to be returned for
  *
@@ -152,7 +193,10 @@ unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp)
 		return 0;
 	}
 
-	return opp->rate;
+	if (!assert_single_clk(opp->opp_table))
+		return 0;
+
+	return opp->rates[0];
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
 
@@ -398,6 +442,154 @@ int dev_pm_opp_get_opp_count(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
 
+/* Helpers to read keys */
+static unsigned long _read_freq(struct dev_pm_opp *opp, int index)
+{
+	return opp->rates[0];
+}
+
+static unsigned long _read_level(struct dev_pm_opp *opp, int index)
+{
+	return opp->level;
+}
+
+static unsigned long _read_bw(struct dev_pm_opp *opp, int index)
+{
+	return opp->bandwidth[index].peak;
+}
+
+/* Generic comparison helpers */
+static bool _compare_exact(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			   unsigned long opp_key, unsigned long key)
+{
+	if (opp_key == key) {
+		*opp = temp_opp;
+		return true;
+	}
+
+	return false;
+}
+
+static bool _compare_ceil(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			  unsigned long opp_key, unsigned long key)
+{
+	if (opp_key >= key) {
+		*opp = temp_opp;
+		return true;
+	}
+
+	return false;
+}
+
+static bool _compare_floor(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			   unsigned long opp_key, unsigned long key)
+{
+	if (opp_key > key)
+		return true;
+
+	*opp = temp_opp;
+	return false;
+}
+
+/* Generic key finding helpers */
+static struct dev_pm_opp *_opp_table_find_key(struct opp_table *opp_table,
+		unsigned long *key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index),
+		bool (*compare)(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+				unsigned long opp_key, unsigned long key),
+		bool (*assert)(struct opp_table *opp_table))
+{
+	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
+
+	/* Assert that the requirement is met */
+	if (assert && !assert(opp_table))
+		return ERR_PTR(-EINVAL);
+
+	mutex_lock(&opp_table->lock);
+
+	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
+		if (temp_opp->available == available) {
+			if (compare(&opp, temp_opp, read(temp_opp, index), *key))
+				break;
+		}
+	}
+
+	/* Increment the reference count of OPP */
+	if (!IS_ERR(opp)) {
+		*key = read(opp, index);
+		dev_pm_opp_get(opp);
+	}
+
+	mutex_unlock(&opp_table->lock);
+
+	return opp;
+}
+
+static struct dev_pm_opp *
+_find_key(struct device *dev, unsigned long *key, int index, bool available,
+	  unsigned long (*read)(struct dev_pm_opp *opp, int index),
+	  bool (*compare)(struct dev_pm_opp **opp, struct dev_pm_opp *temp_opp,
+			  unsigned long opp_key, unsigned long key),
+	  bool (*assert)(struct opp_table *opp_table))
+{
+	struct opp_table *opp_table;
+	struct dev_pm_opp *opp;
+
+	opp_table = _find_opp_table(dev);
+	if (IS_ERR(opp_table)) {
+		dev_err(dev, "%s: OPP table not found (%ld)\n", __func__,
+			PTR_ERR(opp_table));
+		return ERR_CAST(opp_table);
+	}
+
+	opp = _opp_table_find_key(opp_table, key, index, available, read,
+				  compare, assert);
+
+	dev_pm_opp_put_opp_table(opp_table);
+
+	return opp;
+}
+
+static struct dev_pm_opp *_find_key_exact(struct device *dev,
+		unsigned long key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index),
+		bool (*assert)(struct opp_table *opp_table))
+{
+	/*
+	 * The value of key will be updated here, but will be ignored as the
+	 * caller doesn't need it.
+	 */
+	return _find_key(dev, &key, index, available, read, _compare_exact,
+			 assert);
+}
+
+static struct dev_pm_opp *_opp_table_find_key_ceil(struct opp_table *opp_table,
+		unsigned long *key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index),
+		bool (*assert)(struct opp_table *opp_table))
+{
+	return _opp_table_find_key(opp_table, key, index, available, read,
+				   _compare_ceil, assert);
+}
+
+static struct dev_pm_opp *_find_key_ceil(struct device *dev, unsigned long *key,
+		int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index),
+		bool (*assert)(struct opp_table *opp_table))
+{
+	return _find_key(dev, key, index, available, read, _compare_ceil,
+			 assert);
+}
+
+static struct dev_pm_opp *_find_key_floor(struct device *dev,
+		unsigned long *key, int index, bool available,
+		unsigned long (*read)(struct dev_pm_opp *opp, int index),
+		bool (*assert)(struct opp_table *opp_table))
+{
+	return _find_key(dev, key, index, available, read, _compare_floor,
+			 assert);
+}
+
 /**
  * dev_pm_opp_find_freq_exact() - search for an exact frequency
  * @dev:		device for which we do this operation
@@ -422,61 +614,18 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_get_opp_count);
  * use.
  */
 struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
-					      unsigned long freq,
-					      bool available)
+		unsigned long freq, bool available)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		int r = PTR_ERR(opp_table);
-
-		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r);
-		return ERR_PTR(r);
-	}
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available == available &&
-				temp_opp->rate == freq) {
-			opp = temp_opp;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
+	return _find_key_exact(dev, freq, 0, available, _read_freq,
+			       assert_single_clk);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_exact);
 
 static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table,
 						   unsigned long *freq)
 {
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->rate >= *freq) {
-			opp = temp_opp;
-			*freq = opp->rate;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-
-	return opp;
+	return _opp_table_find_key_ceil(opp_table, freq, 0, true, _read_freq,
+					assert_single_clk);
 }
 
 /**
@@ -500,23 +649,7 @@ static noinline struct dev_pm_opp *_find_freq_ceil(struct opp_table *opp_table,
 struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
 					     unsigned long *freq)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *opp;
-
-	if (!dev || !freq) {
-		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	opp = _find_freq_ceil(opp_table, freq);
-
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
+	return _find_key_ceil(dev, freq, 0, true, _read_freq, assert_single_clk);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil);
 
@@ -541,98 +674,11 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil);
 struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					      unsigned long *freq)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !freq) {
-		dev_err(dev, "%s: Invalid argument freq=%p\n", __func__, freq);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available) {
-			/* go to the next node, before choosing prev */
-			if (temp_opp->rate > *freq)
-				break;
-			else
-				opp = temp_opp;
-		}
-	}
-
-	/* Increment the reference count of OPP */
-	if (!IS_ERR(opp))
-		dev_pm_opp_get(opp);
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	if (!IS_ERR(opp))
-		*freq = opp->rate;
-
-	return opp;
+	return _find_key_floor(dev, freq, 0, true, _read_freq, assert_single_clk);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_floor);
 
 /**
- * dev_pm_opp_find_freq_ceil_by_volt() - Find OPP with highest frequency for
- *					 target voltage.
- * @dev:	Device for which we do this operation.
- * @u_volt:	Target voltage.
- *
- * Search for OPP with highest (ceil) frequency and has voltage <= u_volt.
- *
- * Return: matching *opp, else returns ERR_PTR in case of error which should be
- * handled using IS_ERR.
- *
- * Error return values can be:
- * EINVAL:	bad parameters
- *
- * The callers are required to call dev_pm_opp_put() for the returned OPP after
- * use.
- */
-struct dev_pm_opp *dev_pm_opp_find_freq_ceil_by_volt(struct device *dev,
-						     unsigned long u_volt)
-{
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !u_volt) {
-		dev_err(dev, "%s: Invalid argument volt=%lu\n", __func__,
-			u_volt);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available) {
-			if (temp_opp->supplies[0].u_volt > u_volt)
-				break;
-			opp = temp_opp;
-		}
-	}
-
-	/* Increment the reference count of OPP */
-	if (!IS_ERR(opp))
-		dev_pm_opp_get(opp);
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil_by_volt);
-
-/**
  * dev_pm_opp_find_level_exact() - search for an exact level
  * @dev:		device for which we do this operation
  * @level:		level to search for
@@ -650,33 +696,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_freq_ceil_by_volt);
 struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev,
 					       unsigned int level)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		int r = PTR_ERR(opp_table);
-
-		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r);
-		return ERR_PTR(r);
-	}
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->level == level) {
-			opp = temp_opp;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return opp;
+	return _find_key_exact(dev, level, 0, true, _read_level, NULL);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_exact);
 
@@ -698,33 +718,11 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_exact);
 struct dev_pm_opp *dev_pm_opp_find_level_ceil(struct device *dev,
 					      unsigned int *level)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table)) {
-		int r = PTR_ERR(opp_table);
-
-		dev_err(dev, "%s: OPP table not found (%d)\n", __func__, r);
-		return ERR_PTR(r);
-	}
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->level >= *level) {
-			opp = temp_opp;
-			*level = opp->level;
-
-			/* Increment the reference count of OPP */
-			dev_pm_opp_get(opp);
-			break;
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
+	unsigned long temp = *level;
+	struct dev_pm_opp *opp;
 
+	opp = _find_key_ceil(dev, &temp, 0, true, _read_level, NULL);
+	*level = temp;
 	return opp;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil);
@@ -732,7 +730,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil);
 /**
  * dev_pm_opp_find_bw_ceil() - Search for a rounded ceil bandwidth
  * @dev:	device for which we do this operation
- * @freq:	start bandwidth
+ * @bw:	start bandwidth
  * @index:	which bandwidth to compare, in case of OPPs with several values
  *
  * Search for the matching floor *available* OPP from a starting bandwidth
@@ -748,42 +746,14 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_level_ceil);
  * The callers are required to call dev_pm_opp_put() for the returned OPP after
  * use.
  */
-struct dev_pm_opp *dev_pm_opp_find_bw_ceil(struct device *dev,
-					   unsigned int *bw, int index)
+struct dev_pm_opp *dev_pm_opp_find_bw_ceil(struct device *dev, unsigned int *bw,
+					   int index)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !bw) {
-		dev_err(dev, "%s: Invalid argument bw=%p\n", __func__, bw);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	if (index >= opp_table->path_count)
-		return ERR_PTR(-EINVAL);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->bandwidth) {
-			if (temp_opp->bandwidth[index].peak >= *bw) {
-				opp = temp_opp;
-				*bw = opp->bandwidth[index].peak;
-
-				/* Increment the reference count of OPP */
-				dev_pm_opp_get(opp);
-				break;
-			}
-		}
-	}
-
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
+	unsigned long temp = *bw;
+	struct dev_pm_opp *opp;
 
+	opp = _find_key_ceil(dev, &temp, index, true, _read_bw, NULL);
+	*bw = temp;
 	return opp;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_ceil);
@@ -791,7 +761,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_ceil);
 /**
  * dev_pm_opp_find_bw_floor() - Search for a rounded floor bandwidth
  * @dev:	device for which we do this operation
- * @freq:	start bandwidth
+ * @bw:	start bandwidth
  * @index:	which bandwidth to compare, in case of OPPs with several values
  *
  * Search for the matching floor *available* OPP from a starting bandwidth
@@ -810,41 +780,11 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_ceil);
 struct dev_pm_opp *dev_pm_opp_find_bw_floor(struct device *dev,
 					    unsigned int *bw, int index)
 {
-	struct opp_table *opp_table;
-	struct dev_pm_opp *temp_opp, *opp = ERR_PTR(-ERANGE);
-
-	if (!dev || !bw) {
-		dev_err(dev, "%s: Invalid argument bw=%p\n", __func__, bw);
-		return ERR_PTR(-EINVAL);
-	}
-
-	opp_table = _find_opp_table(dev);
-	if (IS_ERR(opp_table))
-		return ERR_CAST(opp_table);
-
-	if (index >= opp_table->path_count)
-		return ERR_PTR(-EINVAL);
-
-	mutex_lock(&opp_table->lock);
-
-	list_for_each_entry(temp_opp, &opp_table->opp_list, node) {
-		if (temp_opp->available && temp_opp->bandwidth) {
-			/* go to the next node, before choosing prev */
-			if (temp_opp->bandwidth[index].peak > *bw)
-				break;
-			opp = temp_opp;
-		}
-	}
-
-	/* Increment the reference count of OPP */
-	if (!IS_ERR(opp))
-		dev_pm_opp_get(opp);
-	mutex_unlock(&opp_table->lock);
-	dev_pm_opp_put_opp_table(opp_table);
-
-	if (!IS_ERR(opp))
-		*bw = opp->bandwidth[index].peak;
+	unsigned long temp = *bw;
+	struct dev_pm_opp *opp;
 
+	opp = _find_key_floor(dev, &temp, index, true, _read_bw, NULL);
+	*bw = temp;
 	return opp;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_find_bw_floor);
@@ -874,80 +814,97 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg,
 	return ret;
 }
 
-static inline int _generic_set_opp_clk_only(struct device *dev, struct clk *clk,
-					    unsigned long freq)
+static int
+_opp_config_clk_single(struct device *dev, struct opp_table *opp_table,
+		       struct dev_pm_opp *opp, void *data, bool scaling_down)
 {
+	unsigned long *target = data;
+	unsigned long freq;
 	int ret;
 
-	/* We may reach here for devices which don't change frequency */
-	if (IS_ERR(clk))
-		return 0;
+	/* One of target and opp must be available */
+	if (target) {
+		freq = *target;
+	} else if (opp) {
+		freq = opp->rates[0];
+	} else {
+		WARN_ON(1);
+		return -EINVAL;
+	}
 
-	ret = clk_set_rate(clk, freq);
+	ret = clk_set_rate(opp_table->clk, freq);
 	if (ret) {
 		dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
 			ret);
+	} else {
+		opp_table->rate_clk_single = freq;
 	}
 
 	return ret;
 }
 
-static int _generic_set_opp_regulator(struct opp_table *opp_table,
-				      struct device *dev,
-				      struct dev_pm_opp *opp,
-				      unsigned long freq,
-				      int scaling_down)
+/*
+ * Simple implementation for configuring multiple clocks. Configure clocks in
+ * the order in which they are present in the array while scaling up.
+ */
+int dev_pm_opp_config_clks_simple(struct device *dev,
+		struct opp_table *opp_table, struct dev_pm_opp *opp, void *data,
+		bool scaling_down)
 {
-	struct regulator *reg = opp_table->regulators[0];
-	struct dev_pm_opp *old_opp = opp_table->current_opp;
+	int ret, i;
+
+	if (scaling_down) {
+		for (i = opp_table->clk_count - 1; i >= 0; i--) {
+			ret = clk_set_rate(opp_table->clks[i], opp->rates[i]);
+			if (ret) {
+				dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
+					ret);
+				return ret;
+			}
+		}
+	} else {
+		for (i = 0; i < opp_table->clk_count; i++) {
+			ret = clk_set_rate(opp_table->clks[i], opp->rates[i]);
+			if (ret) {
+				dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
+					ret);
+				return ret;
+			}
+		}
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_config_clks_simple);
+
+static int _opp_config_regulator_single(struct device *dev,
+			struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp,
+			struct regulator **regulators, unsigned int count)
+{
+	struct regulator *reg = regulators[0];
 	int ret;
 
 	/* This function only supports single regulator per device */
-	if (WARN_ON(opp_table->regulator_count > 1)) {
+	if (WARN_ON(count > 1)) {
 		dev_err(dev, "multiple regulators are not supported\n");
 		return -EINVAL;
 	}
 
-	/* Scaling up? Scale voltage before frequency */
-	if (!scaling_down) {
-		ret = _set_opp_voltage(dev, reg, opp->supplies);
-		if (ret)
-			goto restore_voltage;
-	}
-
-	/* Change frequency */
-	ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
+	ret = _set_opp_voltage(dev, reg, new_opp->supplies);
 	if (ret)
-		goto restore_voltage;
-
-	/* Scaling down? Scale voltage after frequency */
-	if (scaling_down) {
-		ret = _set_opp_voltage(dev, reg, opp->supplies);
-		if (ret)
-			goto restore_freq;
-	}
+		return ret;
 
 	/*
 	 * Enable the regulator after setting its voltages, otherwise it breaks
 	 * some boot-enabled regulators.
 	 */
-	if (unlikely(!opp_table->enabled)) {
+	if (unlikely(!new_opp->opp_table->enabled)) {
 		ret = regulator_enable(reg);
 		if (ret < 0)
 			dev_warn(dev, "Failed to enable regulator: %d", ret);
 	}
 
 	return 0;
-
-restore_freq:
-	if (_generic_set_opp_clk_only(dev, opp_table->clk, old_opp->rate))
-		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
-			__func__, old_opp->rate);
-restore_voltage:
-	/* This shouldn't harm even if the voltages weren't updated earlier */
-	_set_opp_voltage(dev, reg, old_opp->supplies);
-
-	return ret;
 }
 
 static int _set_opp_bw(const struct opp_table *opp_table,
@@ -978,36 +935,6 @@ static int _set_opp_bw(const struct opp_table *opp_table,
 	return 0;
 }
 
-static int _set_opp_custom(const struct opp_table *opp_table,
-			   struct device *dev, struct dev_pm_opp *opp,
-			   unsigned long freq)
-{
-	struct dev_pm_set_opp_data *data = opp_table->set_opp_data;
-	struct dev_pm_opp *old_opp = opp_table->current_opp;
-	int size;
-
-	/*
-	 * We support this only if dev_pm_opp_set_regulators() was called
-	 * earlier.
-	 */
-	if (opp_table->sod_supplies) {
-		size = sizeof(*old_opp->supplies) * opp_table->regulator_count;
-		memcpy(data->old_opp.supplies, old_opp->supplies, size);
-		memcpy(data->new_opp.supplies, opp->supplies, size);
-		data->regulator_count = opp_table->regulator_count;
-	} else {
-		data->regulator_count = 0;
-	}
-
-	data->regulators = opp_table->regulators;
-	data->clk = opp_table->clk;
-	data->dev = dev;
-	data->old_opp.rate = old_opp->rate;
-	data->new_opp.rate = freq;
-
-	return opp_table->set_opp(data);
-}
-
 static int _set_required_opp(struct device *dev, struct device *pd_dev,
 			     struct dev_pm_opp *opp, int i)
 {
@@ -1019,7 +946,7 @@ static int _set_required_opp(struct device *dev, struct device *pd_dev,
 
 	ret = dev_pm_genpd_set_performance_state(pd_dev, pstate);
 	if (ret) {
-		dev_err(dev, "Failed to set performance rate of %s: %d (%d)\n",
+		dev_err(dev, "Failed to set performance state of %s: %d (%d)\n",
 			dev_name(pd_dev), pstate, ret);
 	}
 
@@ -1138,7 +1065,7 @@ static int _disable_opp_table(struct device *dev, struct opp_table *opp_table)
 }
 
 static int _set_opp(struct device *dev, struct opp_table *opp_table,
-		    struct dev_pm_opp *opp, unsigned long freq)
+		    struct dev_pm_opp *opp, void *clk_data, bool forced)
 {
 	struct dev_pm_opp *old_opp;
 	int scaling_down, ret;
@@ -1153,18 +1080,17 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
 	old_opp = opp_table->current_opp;
 
 	/* Return early if nothing to do */
-	if (old_opp == opp && opp_table->current_rate == freq &&
-	    opp_table->enabled) {
+	if (!forced && old_opp == opp && opp_table->enabled) {
 		dev_dbg(dev, "%s: OPPs are same, nothing to do\n", __func__);
 		return 0;
 	}
 
 	dev_dbg(dev, "%s: switching OPP: Freq %lu -> %lu Hz, Level %u -> %u, Bw %u -> %u\n",
-		__func__, opp_table->current_rate, freq, old_opp->level,
+		__func__, old_opp->rates[0], opp->rates[0], old_opp->level,
 		opp->level, old_opp->bandwidth ? old_opp->bandwidth[0].peak : 0,
 		opp->bandwidth ? opp->bandwidth[0].peak : 0);
 
-	scaling_down = _opp_compare_key(old_opp, opp);
+	scaling_down = _opp_compare_key(opp_table, old_opp, opp);
 	if (scaling_down == -1)
 		scaling_down = 0;
 
@@ -1181,23 +1107,38 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
 			dev_err(dev, "Failed to set bw: %d\n", ret);
 			return ret;
 		}
-	}
 
-	if (opp_table->set_opp) {
-		ret = _set_opp_custom(opp_table, dev, opp, freq);
-	} else if (opp_table->regulators) {
-		ret = _generic_set_opp_regulator(opp_table, dev, opp, freq,
-						 scaling_down);
-	} else {
-		/* Only frequency scaling */
-		ret = _generic_set_opp_clk_only(dev, opp_table->clk, freq);
+		if (opp_table->config_regulators) {
+			ret = opp_table->config_regulators(dev, old_opp, opp,
+							   opp_table->regulators,
+							   opp_table->regulator_count);
+			if (ret) {
+				dev_err(dev, "Failed to set regulator voltages: %d\n",
+					ret);
+				return ret;
+			}
+		}
 	}
 
-	if (ret)
-		return ret;
+	if (opp_table->config_clks) {
+		ret = opp_table->config_clks(dev, opp_table, opp, clk_data, scaling_down);
+		if (ret)
+			return ret;
+	}
 
 	/* Scaling down? Configure required OPPs after frequency */
 	if (scaling_down) {
+		if (opp_table->config_regulators) {
+			ret = opp_table->config_regulators(dev, old_opp, opp,
+							   opp_table->regulators,
+							   opp_table->regulator_count);
+			if (ret) {
+				dev_err(dev, "Failed to set regulator voltages: %d\n",
+					ret);
+				return ret;
+			}
+		}
+
 		ret = _set_opp_bw(opp_table, opp, dev);
 		if (ret) {
 			dev_err(dev, "Failed to set bw: %d\n", ret);
@@ -1217,7 +1158,6 @@ static int _set_opp(struct device *dev, struct opp_table *opp_table,
 	/* Make sure current_opp doesn't get freed */
 	dev_pm_opp_get(opp);
 	opp_table->current_opp = opp;
-	opp_table->current_rate = freq;
 
 	return ret;
 }
@@ -1238,6 +1178,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	struct opp_table *opp_table;
 	unsigned long freq = 0, temp_freq;
 	struct dev_pm_opp *opp = NULL;
+	bool forced = false;
 	int ret;
 
 	opp_table = _find_opp_table(dev);
@@ -1255,7 +1196,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		 * equivalent to a clk_set_rate()
 		 */
 		if (!_get_opp_count(opp_table)) {
-			ret = _generic_set_opp_clk_only(dev, opp_table->clk, target_freq);
+			ret = opp_table->config_clks(dev, opp_table, NULL,
+						     &target_freq, false);
 			goto put_opp_table;
 		}
 
@@ -1276,12 +1218,22 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 				__func__, freq, ret);
 			goto put_opp_table;
 		}
+
+		/*
+		 * An OPP entry specifies the highest frequency at which other
+		 * properties of the OPP entry apply. Even if the new OPP is
+		 * same as the old one, we may still reach here for a different
+		 * value of the frequency. In such a case, do not abort but
+		 * configure the hardware to the desired frequency forcefully.
+		 */
+		forced = opp_table->rate_clk_single != target_freq;
 	}
 
-	ret = _set_opp(dev, opp_table, opp, freq);
+	ret = _set_opp(dev, opp_table, opp, &target_freq, forced);
 
 	if (target_freq)
 		dev_pm_opp_put(opp);
+
 put_opp_table:
 	dev_pm_opp_put_opp_table(opp_table);
 	return ret;
@@ -1309,7 +1261,7 @@ int dev_pm_opp_set_opp(struct device *dev, struct dev_pm_opp *opp)
 		return PTR_ERR(opp_table);
 	}
 
-	ret = _set_opp(dev, opp_table, opp, opp ? opp->rate : 0);
+	ret = _set_opp(dev, opp_table, opp, NULL, false);
 	dev_pm_opp_put_opp_table(opp_table);
 
 	return ret;
@@ -1366,6 +1318,8 @@ static struct opp_table *_allocate_opp_table(struct device *dev, int index)
 	INIT_LIST_HEAD(&opp_table->dev_list);
 	INIT_LIST_HEAD(&opp_table->lazy);
 
+	opp_table->clk = ERR_PTR(-ENODEV);
+
 	/* Mark regulator count uninitialized */
 	opp_table->regulator_count = -1;
 
@@ -1412,20 +1366,38 @@ static struct opp_table *_update_opp_table_clk(struct device *dev,
 	int ret;
 
 	/*
-	 * Return early if we don't need to get clk or we have already tried it
+	 * Return early if we don't need to get clk or we have already done it
 	 * earlier.
 	 */
-	if (!getclk || IS_ERR(opp_table) || opp_table->clk)
+	if (!getclk || IS_ERR(opp_table) || !IS_ERR(opp_table->clk) ||
+	    opp_table->clks)
 		return opp_table;
 
 	/* Find clk for the device */
 	opp_table->clk = clk_get(dev, NULL);
 
 	ret = PTR_ERR_OR_ZERO(opp_table->clk);
-	if (!ret)
+	if (!ret) {
+		opp_table->config_clks = _opp_config_clk_single;
+		opp_table->clk_count = 1;
 		return opp_table;
+	}
 
 	if (ret == -ENOENT) {
+		/*
+		 * There are few platforms which don't want the OPP core to
+		 * manage device's clock settings. In such cases neither the
+		 * platform provides the clks explicitly to us, nor the DT
+		 * contains a valid clk entry. The OPP nodes in DT may still
+		 * contain "opp-hz" property though, which we need to parse and
+		 * allow the platform to find an OPP based on freq later on.
+		 *
+		 * This is a simple solution to take care of such corner cases,
+		 * i.e. make the clk_count 1, which lets us allocate space for
+		 * frequency in opp->rates and also parse the entries in DT.
+		 */
+		opp_table->clk_count = 1;
+
 		dev_dbg(dev, "%s: Couldn't find clock: %d\n", __func__, ret);
 		return opp_table;
 	}
@@ -1528,7 +1500,7 @@ static void _opp_table_kref_release(struct kref *kref)
 
 	_of_clear_opp_table(opp_table);
 
-	/* Release clk */
+	/* Release automatically acquired single clk */
 	if (!IS_ERR(opp_table->clk))
 		clk_put(opp_table->clk);
 
@@ -1581,7 +1553,7 @@ static void _opp_kref_release(struct kref *kref)
 	 * frequency/voltage list.
 	 */
 	blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_REMOVE, opp);
-	_of_opp_free_required_opps(opp_table, opp);
+	_of_clear_opp(opp_table, opp);
 	opp_debug_remove_one(opp);
 	kfree(opp);
 }
@@ -1613,10 +1585,13 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq)
 	if (IS_ERR(opp_table))
 		return;
 
+	if (!assert_single_clk(opp_table))
+		goto put_table;
+
 	mutex_lock(&opp_table->lock);
 
 	list_for_each_entry(iter, &opp_table->opp_list, node) {
-		if (iter->rate == freq) {
+		if (iter->rates[0] == freq) {
 			opp = iter;
 			break;
 		}
@@ -1634,6 +1609,7 @@ void dev_pm_opp_remove(struct device *dev, unsigned long freq)
 			 __func__, freq);
 	}
 
+put_table:
 	/* Drop the reference taken by _find_opp_table() */
 	dev_pm_opp_put_opp_table(opp_table);
 }
@@ -1720,26 +1696,31 @@ void dev_pm_opp_remove_all_dynamic(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_remove_all_dynamic);
 
-struct dev_pm_opp *_opp_allocate(struct opp_table *table)
+struct dev_pm_opp *_opp_allocate(struct opp_table *opp_table)
 {
 	struct dev_pm_opp *opp;
-	int supply_count, supply_size, icc_size;
+	int supply_count, supply_size, icc_size, clk_size;
 
 	/* Allocate space for at least one supply */
-	supply_count = table->regulator_count > 0 ? table->regulator_count : 1;
+	supply_count = opp_table->regulator_count > 0 ?
+			opp_table->regulator_count : 1;
 	supply_size = sizeof(*opp->supplies) * supply_count;
-	icc_size = sizeof(*opp->bandwidth) * table->path_count;
+	clk_size = sizeof(*opp->rates) * opp_table->clk_count;
+	icc_size = sizeof(*opp->bandwidth) * opp_table->path_count;
 
 	/* allocate new OPP node and supplies structures */
-	opp = kzalloc(sizeof(*opp) + supply_size + icc_size, GFP_KERNEL);
-
+	opp = kzalloc(sizeof(*opp) + supply_size + clk_size + icc_size, GFP_KERNEL);
 	if (!opp)
 		return NULL;
 
-	/* Put the supplies at the end of the OPP structure as an empty array */
+	/* Put the supplies, bw and clock at the end of the OPP structure */
 	opp->supplies = (struct dev_pm_opp_supply *)(opp + 1);
+
+	opp->rates = (unsigned long *)(opp->supplies + supply_count);
+
 	if (icc_size)
-		opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp->supplies + supply_count);
+		opp->bandwidth = (struct dev_pm_opp_icc_bw *)(opp->rates + opp_table->clk_count);
+
 	INIT_LIST_HEAD(&opp->node);
 
 	return opp;
@@ -1770,15 +1751,57 @@ static bool _opp_supported_by_regulators(struct dev_pm_opp *opp,
 	return true;
 }
 
-int _opp_compare_key(struct dev_pm_opp *opp1, struct dev_pm_opp *opp2)
+static int _opp_compare_rate(struct opp_table *opp_table,
+			     struct dev_pm_opp *opp1, struct dev_pm_opp *opp2)
+{
+	int i;
+
+	for (i = 0; i < opp_table->clk_count; i++) {
+		if (opp1->rates[i] != opp2->rates[i])
+			return opp1->rates[i] < opp2->rates[i] ? -1 : 1;
+	}
+
+	/* Same rates for both OPPs */
+	return 0;
+}
+
+static int _opp_compare_bw(struct opp_table *opp_table, struct dev_pm_opp *opp1,
+			   struct dev_pm_opp *opp2)
 {
-	if (opp1->rate != opp2->rate)
-		return opp1->rate < opp2->rate ? -1 : 1;
-	if (opp1->bandwidth && opp2->bandwidth &&
-	    opp1->bandwidth[0].peak != opp2->bandwidth[0].peak)
-		return opp1->bandwidth[0].peak < opp2->bandwidth[0].peak ? -1 : 1;
+	int i;
+
+	for (i = 0; i < opp_table->path_count; i++) {
+		if (opp1->bandwidth[i].peak != opp2->bandwidth[i].peak)
+			return opp1->bandwidth[i].peak < opp2->bandwidth[i].peak ? -1 : 1;
+	}
+
+	/* Same bw for both OPPs */
+	return 0;
+}
+
+/*
+ * Returns
+ * 0: opp1 == opp2
+ * 1: opp1 > opp2
+ * -1: opp1 < opp2
+ */
+int _opp_compare_key(struct opp_table *opp_table, struct dev_pm_opp *opp1,
+		     struct dev_pm_opp *opp2)
+{
+	int ret;
+
+	ret = _opp_compare_rate(opp_table, opp1, opp2);
+	if (ret)
+		return ret;
+
+	ret = _opp_compare_bw(opp_table, opp1, opp2);
+	if (ret)
+		return ret;
+
 	if (opp1->level != opp2->level)
 		return opp1->level < opp2->level ? -1 : 1;
+
+	/* Duplicate OPPs */
 	return 0;
 }
 
@@ -1798,7 +1821,7 @@ static int _opp_is_duplicate(struct device *dev, struct dev_pm_opp *new_opp,
 	 * loop.
 	 */
 	list_for_each_entry(opp, &opp_table->opp_list, node) {
-		opp_cmp = _opp_compare_key(new_opp, opp);
+		opp_cmp = _opp_compare_key(opp_table, new_opp, opp);
 		if (opp_cmp > 0) {
 			*head = &opp->node;
 			continue;
@@ -1809,8 +1832,8 @@ static int _opp_is_duplicate(struct device *dev, struct dev_pm_opp *new_opp,
 
 		/* Duplicate OPPs */
 		dev_warn(dev, "%s: duplicate OPPs detected. Existing: freq: %lu, volt: %lu, enabled: %d. New: freq: %lu, volt: %lu, enabled: %d\n",
-			 __func__, opp->rate, opp->supplies[0].u_volt,
-			 opp->available, new_opp->rate,
+			 __func__, opp->rates[0], opp->supplies[0].u_volt,
+			 opp->available, new_opp->rates[0],
 			 new_opp->supplies[0].u_volt, new_opp->available);
 
 		/* Should we compare voltages for all regulators here ? */
@@ -1831,7 +1854,7 @@ void _required_opps_available(struct dev_pm_opp *opp, int count)
 
 		opp->available = false;
 		pr_warn("%s: OPP not supported by required OPP %pOF (%lu)\n",
-			 __func__, opp->required_opps[i]->np, opp->rate);
+			 __func__, opp->required_opps[i]->np, opp->rates[0]);
 		return;
 	}
 }
@@ -1847,7 +1870,7 @@ void _required_opps_available(struct dev_pm_opp *opp, int count)
  *  should be considered an error by the callers of _opp_add().
  */
 int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
-	     struct opp_table *opp_table, bool rate_not_available)
+	     struct opp_table *opp_table)
 {
 	struct list_head *head;
 	int ret;
@@ -1872,7 +1895,7 @@ int _opp_add(struct device *dev, struct dev_pm_opp *new_opp,
 	if (!_opp_supported_by_regulators(new_opp, opp_table)) {
 		new_opp->available = false;
 		dev_warn(dev, "%s: OPP not supported by regulators (%lu)\n",
-			 __func__, new_opp->rate);
+			 __func__, new_opp->rates[0]);
 	}
 
 	/* required-opps not fully initialized yet */
@@ -1913,12 +1936,15 @@ int _opp_add_v1(struct opp_table *opp_table, struct device *dev,
 	unsigned long tol;
 	int ret;
 
+	if (!assert_single_clk(opp_table))
+		return -EINVAL;
+
 	new_opp = _opp_allocate(opp_table);
 	if (!new_opp)
 		return -ENOMEM;
 
 	/* populate the opp table */
-	new_opp->rate = freq;
+	new_opp->rates[0] = freq;
 	tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
 	new_opp->supplies[0].u_volt = u_volt;
 	new_opp->supplies[0].u_volt_min = u_volt - tol;
@@ -1926,7 +1952,7 @@ int _opp_add_v1(struct opp_table *opp_table, struct device *dev,
 	new_opp->available = true;
 	new_opp->dynamic = dynamic;
 
-	ret = _opp_add(dev, new_opp, opp_table, false);
+	ret = _opp_add(dev, new_opp, opp_table);
 	if (ret) {
 		/* Don't return error for duplicate OPPs */
 		if (ret == -EBUSY)
@@ -1948,7 +1974,7 @@ free_opp:
 }
 
 /**
- * dev_pm_opp_set_supported_hw() - Set supported platforms
+ * _opp_set_supported_hw() - Set supported platforms
  * @dev: Device for which supported-hw has to be set.
  * @versions: Array of hierarchy of versions to match.
  * @count: Number of elements in the array.
@@ -1958,87 +1984,42 @@ free_opp:
  * OPPs, which are available for those versions, based on its 'opp-supported-hw'
  * property.
  */
-struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev,
-			const u32 *versions, unsigned int count)
+static int _opp_set_supported_hw(struct opp_table *opp_table,
+				 const u32 *versions, unsigned int count)
 {
-	struct opp_table *opp_table;
-
-	opp_table = _add_opp_table(dev, false);
-	if (IS_ERR(opp_table))
-		return opp_table;
-
-	/* Make sure there are no concurrent readers while updating opp_table */
-	WARN_ON(!list_empty(&opp_table->opp_list));
-
 	/* Another CPU that shares the OPP table has set the property ? */
 	if (opp_table->supported_hw)
-		return opp_table;
+		return 0;
 
 	opp_table->supported_hw = kmemdup(versions, count * sizeof(*versions),
 					GFP_KERNEL);
-	if (!opp_table->supported_hw) {
-		dev_pm_opp_put_opp_table(opp_table);
-		return ERR_PTR(-ENOMEM);
-	}
+	if (!opp_table->supported_hw)
+		return -ENOMEM;
 
 	opp_table->supported_hw_count = count;
 
-	return opp_table;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_supported_hw);
 
 /**
- * dev_pm_opp_put_supported_hw() - Releases resources blocked for supported hw
- * @opp_table: OPP table returned by dev_pm_opp_set_supported_hw().
+ * _opp_put_supported_hw() - Releases resources blocked for supported hw
+ * @opp_table: OPP table returned by _opp_set_supported_hw().
  *
  * This is required only for the V2 bindings, and is called for a matching
- * dev_pm_opp_set_supported_hw(). Until this is called, the opp_table structure
+ * _opp_set_supported_hw(). Until this is called, the opp_table structure
  * will not be freed.
  */
-void dev_pm_opp_put_supported_hw(struct opp_table *opp_table)
-{
-	if (unlikely(!opp_table))
-		return;
-
-	kfree(opp_table->supported_hw);
-	opp_table->supported_hw = NULL;
-	opp_table->supported_hw_count = 0;
-
-	dev_pm_opp_put_opp_table(opp_table);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_supported_hw);
-
-static void devm_pm_opp_supported_hw_release(void *data)
+static void _opp_put_supported_hw(struct opp_table *opp_table)
 {
-	dev_pm_opp_put_supported_hw(data);
-}
-
-/**
- * devm_pm_opp_set_supported_hw() - Set supported platforms
- * @dev: Device for which supported-hw has to be set.
- * @versions: Array of hierarchy of versions to match.
- * @count: Number of elements in the array.
- *
- * This is a resource-managed variant of dev_pm_opp_set_supported_hw().
- *
- * Return: 0 on success and errorno otherwise.
- */
-int devm_pm_opp_set_supported_hw(struct device *dev, const u32 *versions,
-				 unsigned int count)
-{
-	struct opp_table *opp_table;
-
-	opp_table = dev_pm_opp_set_supported_hw(dev, versions, count);
-	if (IS_ERR(opp_table))
-		return PTR_ERR(opp_table);
-
-	return devm_add_action_or_reset(dev, devm_pm_opp_supported_hw_release,
-					opp_table);
+	if (opp_table->supported_hw) {
+		kfree(opp_table->supported_hw);
+		opp_table->supported_hw = NULL;
+		opp_table->supported_hw_count = 0;
+	}
 }
-EXPORT_SYMBOL_GPL(devm_pm_opp_set_supported_hw);
 
 /**
- * dev_pm_opp_set_prop_name() - Set prop-extn name
+ * _opp_set_prop_name() - Set prop-extn name
  * @dev: Device for which the prop-name has to be set.
  * @name: name to postfix to properties.
  *
@@ -2047,53 +2028,36 @@ EXPORT_SYMBOL_GPL(devm_pm_opp_set_supported_hw);
  * which the extension will apply are opp-microvolt and opp-microamp. OPP core
  * should postfix the property name with -<name> while looking for them.
  */
-struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name)
+static int _opp_set_prop_name(struct opp_table *opp_table, const char *name)
 {
-	struct opp_table *opp_table;
-
-	opp_table = _add_opp_table(dev, false);
-	if (IS_ERR(opp_table))
-		return opp_table;
-
-	/* Make sure there are no concurrent readers while updating opp_table */
-	WARN_ON(!list_empty(&opp_table->opp_list));
-
 	/* Another CPU that shares the OPP table has set the property ? */
-	if (opp_table->prop_name)
-		return opp_table;
-
-	opp_table->prop_name = kstrdup(name, GFP_KERNEL);
 	if (!opp_table->prop_name) {
-		dev_pm_opp_put_opp_table(opp_table);
-		return ERR_PTR(-ENOMEM);
+		opp_table->prop_name = kstrdup(name, GFP_KERNEL);
+		if (!opp_table->prop_name)
+			return -ENOMEM;
 	}
 
-	return opp_table;
+	return 0;
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_prop_name);
 
 /**
- * dev_pm_opp_put_prop_name() - Releases resources blocked for prop-name
- * @opp_table: OPP table returned by dev_pm_opp_set_prop_name().
+ * _opp_put_prop_name() - Releases resources blocked for prop-name
+ * @opp_table: OPP table returned by _opp_set_prop_name().
  *
  * This is required only for the V2 bindings, and is called for a matching
- * dev_pm_opp_set_prop_name(). Until this is called, the opp_table structure
+ * _opp_set_prop_name(). Until this is called, the opp_table structure
  * will not be freed.
  */
-void dev_pm_opp_put_prop_name(struct opp_table *opp_table)
+static void _opp_put_prop_name(struct opp_table *opp_table)
 {
-	if (unlikely(!opp_table))
-		return;
-
-	kfree(opp_table->prop_name);
-	opp_table->prop_name = NULL;
-
-	dev_pm_opp_put_opp_table(opp_table);
+	if (opp_table->prop_name) {
+		kfree(opp_table->prop_name);
+		opp_table->prop_name = NULL;
+	}
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
 
 /**
- * dev_pm_opp_set_regulators() - Set regulator names for the device
+ * _opp_set_regulators() - Set regulator names for the device
  * @dev: Device for which regulator name is being set.
  * @names: Array of pointers to the names of the regulator.
  * @count: Number of regulators.
@@ -2104,36 +2068,29 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_put_prop_name);
  *
  * This must be called before any OPPs are initialized for the device.
  */
-struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
-					    const char * const names[],
-					    unsigned int count)
+static int _opp_set_regulators(struct opp_table *opp_table, struct device *dev,
+			       const char * const names[])
 {
-	struct dev_pm_opp_supply *supplies;
-	struct opp_table *opp_table;
+	const char * const *temp = names;
 	struct regulator *reg;
-	int ret, i;
+	int count = 0, ret, i;
 
-	opp_table = _add_opp_table(dev, false);
-	if (IS_ERR(opp_table))
-		return opp_table;
+	/* Count number of regulators */
+	while (*temp++)
+		count++;
 
-	/* This should be called before OPPs are initialized */
-	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
-		ret = -EBUSY;
-		goto err;
-	}
+	if (!count)
+		return -EINVAL;
 
 	/* Another CPU that shares the OPP table has set the regulators ? */
 	if (opp_table->regulators)
-		return opp_table;
+		return 0;
 
 	opp_table->regulators = kmalloc_array(count,
 					      sizeof(*opp_table->regulators),
 					      GFP_KERNEL);
-	if (!opp_table->regulators) {
-		ret = -ENOMEM;
-		goto err;
-	}
+	if (!opp_table->regulators)
+		return -ENOMEM;
 
 	for (i = 0; i < count; i++) {
 		reg = regulator_get_optional(dev, names[i]);
@@ -2149,21 +2106,11 @@ struct opp_table *dev_pm_opp_set_regulators(struct device *dev,
 
 	opp_table->regulator_count = count;
 
-	supplies = kmalloc_array(count * 2, sizeof(*supplies), GFP_KERNEL);
-	if (!supplies) {
-		ret = -ENOMEM;
-		goto free_regulators;
-	}
-
-	mutex_lock(&opp_table->lock);
-	opp_table->sod_supplies = supplies;
-	if (opp_table->set_opp_data) {
-		opp_table->set_opp_data->old_opp.supplies = supplies;
-		opp_table->set_opp_data->new_opp.supplies = supplies + count;
-	}
-	mutex_unlock(&opp_table->lock);
+	/* Set generic config_regulators() for single regulators here */
+	if (count == 1)
+		opp_table->config_regulators = _opp_config_regulator_single;
 
-	return opp_table;
+	return 0;
 
 free_regulators:
 	while (i != 0)
@@ -2172,26 +2119,20 @@ free_regulators:
 	kfree(opp_table->regulators);
 	opp_table->regulators = NULL;
 	opp_table->regulator_count = -1;
-err:
-	dev_pm_opp_put_opp_table(opp_table);
 
-	return ERR_PTR(ret);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_regulators);
 
 /**
- * dev_pm_opp_put_regulators() - Releases resources blocked for regulator
- * @opp_table: OPP table returned from dev_pm_opp_set_regulators().
+ * _opp_put_regulators() - Releases resources blocked for regulator
+ * @opp_table: OPP table returned from _opp_set_regulators().
  */
-void dev_pm_opp_put_regulators(struct opp_table *opp_table)
+static void _opp_put_regulators(struct opp_table *opp_table)
 {
 	int i;
 
-	if (unlikely(!opp_table))
-		return;
-
 	if (!opp_table->regulators)
-		goto put_opp_table;
+		return;
 
 	if (opp_table->enabled) {
 		for (i = opp_table->regulator_count - 1; i >= 0; i--)
@@ -2201,252 +2142,158 @@ void dev_pm_opp_put_regulators(struct opp_table *opp_table)
 	for (i = opp_table->regulator_count - 1; i >= 0; i--)
 		regulator_put(opp_table->regulators[i]);
 
-	mutex_lock(&opp_table->lock);
-	if (opp_table->set_opp_data) {
-		opp_table->set_opp_data->old_opp.supplies = NULL;
-		opp_table->set_opp_data->new_opp.supplies = NULL;
-	}
-
-	kfree(opp_table->sod_supplies);
-	opp_table->sod_supplies = NULL;
-	mutex_unlock(&opp_table->lock);
-
 	kfree(opp_table->regulators);
 	opp_table->regulators = NULL;
 	opp_table->regulator_count = -1;
-
-put_opp_table:
-	dev_pm_opp_put_opp_table(opp_table);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_regulators);
 
-static void devm_pm_opp_regulators_release(void *data)
+static void _put_clks(struct opp_table *opp_table, int count)
 {
-	dev_pm_opp_put_regulators(data);
-}
-
-/**
- * devm_pm_opp_set_regulators() - Set regulator names for the device
- * @dev: Device for which regulator name is being set.
- * @names: Array of pointers to the names of the regulator.
- * @count: Number of regulators.
- *
- * This is a resource-managed variant of dev_pm_opp_set_regulators().
- *
- * Return: 0 on success and errorno otherwise.
- */
-int devm_pm_opp_set_regulators(struct device *dev,
-			       const char * const names[],
-			       unsigned int count)
-{
-	struct opp_table *opp_table;
+	int i;
 
-	opp_table = dev_pm_opp_set_regulators(dev, names, count);
-	if (IS_ERR(opp_table))
-		return PTR_ERR(opp_table);
+	for (i = count - 1; i >= 0; i--)
+		clk_put(opp_table->clks[i]);
 
-	return devm_add_action_or_reset(dev, devm_pm_opp_regulators_release,
-					opp_table);
+	kfree(opp_table->clks);
+	opp_table->clks = NULL;
 }
-EXPORT_SYMBOL_GPL(devm_pm_opp_set_regulators);
 
 /**
- * dev_pm_opp_set_clkname() - Set clk name for the device
- * @dev: Device for which clk name is being set.
- * @name: Clk name.
- *
- * In order to support OPP switching, OPP layer needs to get pointer to the
- * clock for the device. Simple cases work fine without using this routine (i.e.
- * by passing connection-id as NULL), but for a device with multiple clocks
- * available, the OPP core needs to know the exact name of the clk to use.
+ * _opp_set_clknames() - Set clk names for the device
+ * @dev: Device for which clk names is being set.
+ * @names: Clk names.
+ *
+ * In order to support OPP switching, OPP layer needs to get pointers to the
+ * clocks for the device. Simple cases work fine without using this routine
+ * (i.e. by passing connection-id as NULL), but for a device with multiple
+ * clocks available, the OPP core needs to know the exact names of the clks to
+ * use.
  *
  * This must be called before any OPPs are initialized for the device.
  */
-struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name)
+static int _opp_set_clknames(struct opp_table *opp_table, struct device *dev,
+			     const char * const names[],
+			     config_clks_t config_clks)
 {
-	struct opp_table *opp_table;
-	int ret;
+	const char * const *temp = names;
+	int count = 0, ret, i;
+	struct clk *clk;
 
-	opp_table = _add_opp_table(dev, false);
-	if (IS_ERR(opp_table))
-		return opp_table;
+	/* Count number of clks */
+	while (*temp++)
+		count++;
 
-	/* This should be called before OPPs are initialized */
-	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
-		ret = -EBUSY;
-		goto err;
-	}
+	/*
+	 * This is a special case where we have a single clock, whose connection
+	 * id name is NULL, i.e. first two entries are NULL in the array.
+	 */
+	if (!count && !names[1])
+		count = 1;
 
-	/* clk shouldn't be initialized at this point */
-	if (WARN_ON(opp_table->clk)) {
-		ret = -EBUSY;
-		goto err;
-	}
+	/* Fail early for invalid configurations */
+	if (!count || (!config_clks && count > 1))
+		return -EINVAL;
 
-	/* Find clk for the device */
-	opp_table->clk = clk_get(dev, name);
-	if (IS_ERR(opp_table->clk)) {
-		ret = dev_err_probe(dev, PTR_ERR(opp_table->clk),
-				    "%s: Couldn't find clock\n", __func__);
-		goto err;
-	}
+	/* Another CPU that shares the OPP table has set the clkname ? */
+	if (opp_table->clks)
+		return 0;
 
-	return opp_table;
+	opp_table->clks = kmalloc_array(count, sizeof(*opp_table->clks),
+					GFP_KERNEL);
+	if (!opp_table->clks)
+		return -ENOMEM;
 
-err:
-	dev_pm_opp_put_opp_table(opp_table);
+	/* Find clks for the device */
+	for (i = 0; i < count; i++) {
+		clk = clk_get(dev, names[i]);
+		if (IS_ERR(clk)) {
+			ret = dev_err_probe(dev, PTR_ERR(clk),
+					    "%s: Couldn't find clock with name: %s\n",
+					    __func__, names[i]);
+			goto free_clks;
+		}
 
-	return ERR_PTR(ret);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_set_clkname);
+		opp_table->clks[i] = clk;
+	}
 
-/**
- * dev_pm_opp_put_clkname() - Releases resources blocked for clk.
- * @opp_table: OPP table returned from dev_pm_opp_set_clkname().
- */
-void dev_pm_opp_put_clkname(struct opp_table *opp_table)
-{
-	if (unlikely(!opp_table))
-		return;
+	opp_table->clk_count = count;
+	opp_table->config_clks = config_clks;
 
-	clk_put(opp_table->clk);
-	opp_table->clk = ERR_PTR(-EINVAL);
+	/* Set generic single clk set here */
+	if (count == 1) {
+		if (!opp_table->config_clks)
+			opp_table->config_clks = _opp_config_clk_single;
 
-	dev_pm_opp_put_opp_table(opp_table);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_put_clkname);
+		/*
+		 * We could have just dropped the "clk" field and used "clks"
+		 * everywhere. Instead we kept the "clk" field around for
+		 * following reasons:
+		 *
+		 * - avoiding clks[0] everywhere else.
+		 * - not running single clk helpers for multiple clk usecase by
+		 *   mistake.
+		 *
+		 * Since this is single-clk case, just update the clk pointer
+		 * too.
+		 */
+		opp_table->clk = opp_table->clks[0];
+	}
 
-static void devm_pm_opp_clkname_release(void *data)
-{
-	dev_pm_opp_put_clkname(data);
+	return 0;
+
+free_clks:
+	_put_clks(opp_table, i);
+	return ret;
 }
 
 /**
- * devm_pm_opp_set_clkname() - Set clk name for the device
- * @dev: Device for which clk name is being set.
- * @name: Clk name.
- *
- * This is a resource-managed variant of dev_pm_opp_set_clkname().
- *
- * Return: 0 on success and errorno otherwise.
+ * _opp_put_clknames() - Releases resources blocked for clks.
+ * @opp_table: OPP table returned from _opp_set_clknames().
  */
-int devm_pm_opp_set_clkname(struct device *dev, const char *name)
+static void _opp_put_clknames(struct opp_table *opp_table)
 {
-	struct opp_table *opp_table;
+	if (!opp_table->clks)
+		return;
 
-	opp_table = dev_pm_opp_set_clkname(dev, name);
-	if (IS_ERR(opp_table))
-		return PTR_ERR(opp_table);
+	opp_table->config_clks = NULL;
+	opp_table->clk = ERR_PTR(-ENODEV);
 
-	return devm_add_action_or_reset(dev, devm_pm_opp_clkname_release,
-					opp_table);
+	_put_clks(opp_table, opp_table->clk_count);
 }
-EXPORT_SYMBOL_GPL(devm_pm_opp_set_clkname);
 
 /**
- * dev_pm_opp_register_set_opp_helper() - Register custom set OPP helper
+ * _opp_set_config_regulators_helper() - Register custom set regulator helper.
  * @dev: Device for which the helper is getting registered.
- * @set_opp: Custom set OPP helper.
+ * @config_regulators: Custom set regulator helper.
  *
- * This is useful to support complex platforms (like platforms with multiple
- * regulators per device), instead of the generic OPP set rate helper.
+ * This is useful to support platforms with multiple regulators per device.
  *
  * This must be called before any OPPs are initialized for the device.
  */
-struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev,
-			int (*set_opp)(struct dev_pm_set_opp_data *data))
+static int _opp_set_config_regulators_helper(struct opp_table *opp_table,
+		struct device *dev, config_regulators_t config_regulators)
 {
-	struct dev_pm_set_opp_data *data;
-	struct opp_table *opp_table;
-
-	if (!set_opp)
-		return ERR_PTR(-EINVAL);
-
-	opp_table = _add_opp_table(dev, false);
-	if (IS_ERR(opp_table))
-		return opp_table;
-
-	/* This should be called before OPPs are initialized */
-	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
-		dev_pm_opp_put_opp_table(opp_table);
-		return ERR_PTR(-EBUSY);
-	}
-
 	/* Another CPU that shares the OPP table has set the helper ? */
-	if (opp_table->set_opp)
-		return opp_table;
+	if (!opp_table->config_regulators)
+		opp_table->config_regulators = config_regulators;
 
-	data = kzalloc(sizeof(*data), GFP_KERNEL);
-	if (!data)
-		return ERR_PTR(-ENOMEM);
-
-	mutex_lock(&opp_table->lock);
-	opp_table->set_opp_data = data;
-	if (opp_table->sod_supplies) {
-		data->old_opp.supplies = opp_table->sod_supplies;
-		data->new_opp.supplies = opp_table->sod_supplies +
-					 opp_table->regulator_count;
-	}
-	mutex_unlock(&opp_table->lock);
-
-	opp_table->set_opp = set_opp;
-
-	return opp_table;
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_register_set_opp_helper);
-
-/**
- * dev_pm_opp_unregister_set_opp_helper() - Releases resources blocked for
- *					   set_opp helper
- * @opp_table: OPP table returned from dev_pm_opp_register_set_opp_helper().
- *
- * Release resources blocked for platform specific set_opp helper.
- */
-void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table)
-{
-	if (unlikely(!opp_table))
-		return;
-
-	opp_table->set_opp = NULL;
-
-	mutex_lock(&opp_table->lock);
-	kfree(opp_table->set_opp_data);
-	opp_table->set_opp_data = NULL;
-	mutex_unlock(&opp_table->lock);
-
-	dev_pm_opp_put_opp_table(opp_table);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_unregister_set_opp_helper);
-
-static void devm_pm_opp_unregister_set_opp_helper(void *data)
-{
-	dev_pm_opp_unregister_set_opp_helper(data);
+	return 0;
 }
 
 /**
- * devm_pm_opp_register_set_opp_helper() - Register custom set OPP helper
- * @dev: Device for which the helper is getting registered.
- * @set_opp: Custom set OPP helper.
- *
- * This is a resource-managed version of dev_pm_opp_register_set_opp_helper().
+ * _opp_put_config_regulators_helper() - Releases resources blocked for
+ *					 config_regulators helper.
+ * @opp_table: OPP table returned from _opp_set_config_regulators_helper().
  *
- * Return: 0 on success and errorno otherwise.
+ * Release resources blocked for platform specific config_regulators helper.
  */
-int devm_pm_opp_register_set_opp_helper(struct device *dev,
-					int (*set_opp)(struct dev_pm_set_opp_data *data))
+static void _opp_put_config_regulators_helper(struct opp_table *opp_table)
 {
-	struct opp_table *opp_table;
-
-	opp_table = dev_pm_opp_register_set_opp_helper(dev, set_opp);
-	if (IS_ERR(opp_table))
-		return PTR_ERR(opp_table);
-
-	return devm_add_action_or_reset(dev, devm_pm_opp_unregister_set_opp_helper,
-					opp_table);
+	if (opp_table->config_regulators)
+		opp_table->config_regulators = NULL;
 }
-EXPORT_SYMBOL_GPL(devm_pm_opp_register_set_opp_helper);
 
-static void _opp_detach_genpd(struct opp_table *opp_table)
+static void _detach_genpd(struct opp_table *opp_table)
 {
 	int index;
 
@@ -2466,7 +2313,7 @@ static void _opp_detach_genpd(struct opp_table *opp_table)
 }
 
 /**
- * dev_pm_opp_attach_genpd - Attach genpd(s) for the device and save virtual device pointer
+ * _opp_attach_genpd - Attach genpd(s) for the device and save virtual device pointer
  * @dev: Consumer device for which the genpd is getting attached.
  * @names: Null terminated array of pointers containing names of genpd to attach.
  * @virt_devs: Pointer to return the array of virtual devices.
@@ -2487,30 +2334,23 @@ static void _opp_detach_genpd(struct opp_table *opp_table)
  * The order of entries in the names array must match the order in which
  * "required-opps" are added in DT.
  */
-struct opp_table *dev_pm_opp_attach_genpd(struct device *dev,
-		const char * const *names, struct device ***virt_devs)
+static int _opp_attach_genpd(struct opp_table *opp_table, struct device *dev,
+			const char * const *names, struct device ***virt_devs)
 {
-	struct opp_table *opp_table;
 	struct device *virt_dev;
 	int index = 0, ret = -EINVAL;
 	const char * const *name = names;
 
-	opp_table = _add_opp_table(dev, false);
-	if (IS_ERR(opp_table))
-		return opp_table;
-
 	if (opp_table->genpd_virt_devs)
-		return opp_table;
+		return 0;
 
 	/*
 	 * If the genpd's OPP table isn't already initialized, parsing of the
 	 * required-opps fail for dev. We should retry this after genpd's OPP
 	 * table is added.
 	 */
-	if (!opp_table->required_opp_count) {
-		ret = -EPROBE_DEFER;
-		goto put_table;
-	}
+	if (!opp_table->required_opp_count)
+		return -EPROBE_DEFER;
 
 	mutex_lock(&opp_table->genpd_virt_dev_lock);
 
@@ -2528,8 +2368,8 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev,
 		}
 
 		virt_dev = dev_pm_domain_attach_by_name(dev, *name);
-		if (IS_ERR(virt_dev)) {
-			ret = PTR_ERR(virt_dev);
+		if (IS_ERR_OR_NULL(virt_dev)) {
+			ret = PTR_ERR(virt_dev) ? : -ENODEV;
 			dev_err(dev, "Couldn't attach to pm_domain: %d\n", ret);
 			goto err;
 		}
@@ -2543,73 +2383,230 @@ struct opp_table *dev_pm_opp_attach_genpd(struct device *dev,
 		*virt_devs = opp_table->genpd_virt_devs;
 	mutex_unlock(&opp_table->genpd_virt_dev_lock);
 
-	return opp_table;
+	return 0;
 
 err:
-	_opp_detach_genpd(opp_table);
+	_detach_genpd(opp_table);
 unlock:
 	mutex_unlock(&opp_table->genpd_virt_dev_lock);
+	return ret;
 
-put_table:
-	dev_pm_opp_put_opp_table(opp_table);
-
-	return ERR_PTR(ret);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_attach_genpd);
 
 /**
- * dev_pm_opp_detach_genpd() - Detach genpd(s) from the device.
- * @opp_table: OPP table returned by dev_pm_opp_attach_genpd().
+ * _opp_detach_genpd() - Detach genpd(s) from the device.
+ * @opp_table: OPP table returned by _opp_attach_genpd().
  *
  * This detaches the genpd(s), resets the virtual device pointers, and puts the
  * OPP table.
  */
-void dev_pm_opp_detach_genpd(struct opp_table *opp_table)
+static void _opp_detach_genpd(struct opp_table *opp_table)
 {
-	if (unlikely(!opp_table))
-		return;
-
 	/*
 	 * Acquire genpd_virt_dev_lock to make sure virt_dev isn't getting
 	 * used in parallel.
 	 */
 	mutex_lock(&opp_table->genpd_virt_dev_lock);
-	_opp_detach_genpd(opp_table);
+	_detach_genpd(opp_table);
 	mutex_unlock(&opp_table->genpd_virt_dev_lock);
-
-	dev_pm_opp_put_opp_table(opp_table);
 }
-EXPORT_SYMBOL_GPL(dev_pm_opp_detach_genpd);
 
-static void devm_pm_opp_detach_genpd(void *data)
+static void _opp_clear_config(struct opp_config_data *data)
 {
-	dev_pm_opp_detach_genpd(data);
+	if (data->flags & OPP_CONFIG_GENPD)
+		_opp_detach_genpd(data->opp_table);
+	if (data->flags & OPP_CONFIG_REGULATOR)
+		_opp_put_regulators(data->opp_table);
+	if (data->flags & OPP_CONFIG_SUPPORTED_HW)
+		_opp_put_supported_hw(data->opp_table);
+	if (data->flags & OPP_CONFIG_REGULATOR_HELPER)
+		_opp_put_config_regulators_helper(data->opp_table);
+	if (data->flags & OPP_CONFIG_PROP_NAME)
+		_opp_put_prop_name(data->opp_table);
+	if (data->flags & OPP_CONFIG_CLK)
+		_opp_put_clknames(data->opp_table);
+
+	dev_pm_opp_put_opp_table(data->opp_table);
+	kfree(data);
 }
 
 /**
- * devm_pm_opp_attach_genpd - Attach genpd(s) for the device and save virtual
- *			      device pointer
- * @dev: Consumer device for which the genpd is getting attached.
- * @names: Null terminated array of pointers containing names of genpd to attach.
- * @virt_devs: Pointer to return the array of virtual devices.
+ * dev_pm_opp_set_config() - Set OPP configuration for the device.
+ * @dev: Device for which configuration is being set.
+ * @config: OPP configuration.
  *
- * This is a resource-managed version of dev_pm_opp_attach_genpd().
+ * This allows all device OPP configurations to be performed at once.
  *
- * Return: 0 on success and errorno otherwise.
+ * This must be called before any OPPs are initialized for the device. This may
+ * be called multiple times for the same OPP table, for example once for each
+ * CPU that share the same table. This must be balanced by the same number of
+ * calls to dev_pm_opp_clear_config() in order to free the OPP table properly.
+ *
+ * This returns a token to the caller, which must be passed to
+ * dev_pm_opp_clear_config() to free the resources later. The value of the
+ * returned token will be >= 1 for success and negative for errors. The minimum
+ * value of 1 is chosen here to make it easy for callers to manage the resource.
  */
-int devm_pm_opp_attach_genpd(struct device *dev, const char * const *names,
-			     struct device ***virt_devs)
+int dev_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config)
 {
 	struct opp_table *opp_table;
+	struct opp_config_data *data;
+	unsigned int id;
+	int ret;
 
-	opp_table = dev_pm_opp_attach_genpd(dev, names, virt_devs);
-	if (IS_ERR(opp_table))
+	data = kmalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	opp_table = _add_opp_table(dev, false);
+	if (IS_ERR(opp_table)) {
+		kfree(data);
 		return PTR_ERR(opp_table);
+	}
+
+	data->opp_table = opp_table;
+	data->flags = 0;
+
+	/* This should be called before OPPs are initialized */
+	if (WARN_ON(!list_empty(&opp_table->opp_list))) {
+		ret = -EBUSY;
+		goto err;
+	}
+
+	/* Configure clocks */
+	if (config->clk_names) {
+		ret = _opp_set_clknames(opp_table, dev, config->clk_names,
+					config->config_clks);
+		if (ret)
+			goto err;
+
+		data->flags |= OPP_CONFIG_CLK;
+	} else if (config->config_clks) {
+		/* Don't allow config callback without clocks */
+		ret = -EINVAL;
+		goto err;
+	}
+
+	/* Configure property names */
+	if (config->prop_name) {
+		ret = _opp_set_prop_name(opp_table, config->prop_name);
+		if (ret)
+			goto err;
+
+		data->flags |= OPP_CONFIG_PROP_NAME;
+	}
+
+	/* Configure config_regulators helper */
+	if (config->config_regulators) {
+		ret = _opp_set_config_regulators_helper(opp_table, dev,
+						config->config_regulators);
+		if (ret)
+			goto err;
+
+		data->flags |= OPP_CONFIG_REGULATOR_HELPER;
+	}
 
-	return devm_add_action_or_reset(dev, devm_pm_opp_detach_genpd,
-					opp_table);
+	/* Configure supported hardware */
+	if (config->supported_hw) {
+		ret = _opp_set_supported_hw(opp_table, config->supported_hw,
+					    config->supported_hw_count);
+		if (ret)
+			goto err;
+
+		data->flags |= OPP_CONFIG_SUPPORTED_HW;
+	}
+
+	/* Configure supplies */
+	if (config->regulator_names) {
+		ret = _opp_set_regulators(opp_table, dev,
+					  config->regulator_names);
+		if (ret)
+			goto err;
+
+		data->flags |= OPP_CONFIG_REGULATOR;
+	}
+
+	/* Attach genpds */
+	if (config->genpd_names) {
+		ret = _opp_attach_genpd(opp_table, dev, config->genpd_names,
+					config->virt_devs);
+		if (ret)
+			goto err;
+
+		data->flags |= OPP_CONFIG_GENPD;
+	}
+
+	ret = xa_alloc(&opp_configs, &id, data, XA_LIMIT(1, INT_MAX),
+		       GFP_KERNEL);
+	if (ret)
+		goto err;
+
+	return id;
+
+err:
+	_opp_clear_config(data);
+	return ret;
 }
-EXPORT_SYMBOL_GPL(devm_pm_opp_attach_genpd);
+EXPORT_SYMBOL_GPL(dev_pm_opp_set_config);
+
+/**
+ * dev_pm_opp_clear_config() - Releases resources blocked for OPP configuration.
+ * @opp_table: OPP table returned from dev_pm_opp_set_config().
+ *
+ * This allows all device OPP configurations to be cleared at once. This must be
+ * called once for each call made to dev_pm_opp_set_config(), in order to free
+ * the OPPs properly.
+ *
+ * Currently the first call itself ends up freeing all the OPP configurations,
+ * while the later ones only drop the OPP table reference. This works well for
+ * now as we would never want to use an half initialized OPP table and want to
+ * remove the configurations together.
+ */
+void dev_pm_opp_clear_config(int token)
+{
+	struct opp_config_data *data;
+
+	/*
+	 * This lets the callers call this unconditionally and keep their code
+	 * simple.
+	 */
+	if (unlikely(token <= 0))
+		return;
+
+	data = xa_erase(&opp_configs, token);
+	if (WARN_ON(!data))
+		return;
+
+	_opp_clear_config(data);
+}
+EXPORT_SYMBOL_GPL(dev_pm_opp_clear_config);
+
+static void devm_pm_opp_config_release(void *token)
+{
+	dev_pm_opp_clear_config((unsigned long)token);
+}
+
+/**
+ * devm_pm_opp_set_config() - Set OPP configuration for the device.
+ * @dev: Device for which configuration is being set.
+ * @config: OPP configuration.
+ *
+ * This allows all device OPP configurations to be performed at once.
+ * This is a resource-managed variant of dev_pm_opp_set_config().
+ *
+ * Return: 0 on success and errorno otherwise.
+ */
+int devm_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config)
+{
+	int token = dev_pm_opp_set_config(dev, config);
+
+	if (token < 0)
+		return token;
+
+	return devm_add_action_or_reset(dev, devm_pm_opp_config_release,
+					(void *) ((unsigned long) token));
+}
+EXPORT_SYMBOL_GPL(devm_pm_opp_set_config);
 
 /**
  * dev_pm_opp_xlate_required_opp() - Find required OPP for @src_table OPP.
@@ -2795,11 +2792,16 @@ static int _opp_set_availability(struct device *dev, unsigned long freq,
 		return r;
 	}
 
+	if (!assert_single_clk(opp_table)) {
+		r = -EINVAL;
+		goto put_table;
+	}
+
 	mutex_lock(&opp_table->lock);
 
 	/* Do we have the frequency? */
 	list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
-		if (tmp_opp->rate == freq) {
+		if (tmp_opp->rates[0] == freq) {
 			opp = tmp_opp;
 			break;
 		}
@@ -2866,11 +2868,16 @@ int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
 		return r;
 	}
 
+	if (!assert_single_clk(opp_table)) {
+		r = -EINVAL;
+		goto put_table;
+	}
+
 	mutex_lock(&opp_table->lock);
 
 	/* Do we have the frequency? */
 	list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
-		if (tmp_opp->rate == freq) {
+		if (tmp_opp->rates[0] == freq) {
 			opp = tmp_opp;
 			break;
 		}
@@ -2897,11 +2904,11 @@ int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
 				     opp);
 
 	dev_pm_opp_put(opp);
-	goto adjust_put_table;
+	goto put_table;
 
 adjust_unlock:
 	mutex_unlock(&opp_table->lock);
-adjust_put_table:
+put_table:
 	dev_pm_opp_put_opp_table(opp_table);
 	return r;
 }
diff --git a/drivers/opp/cpu.c b/drivers/opp/cpu.c
index 5004335cf0de..3c3506021501 100644
--- a/drivers/opp/cpu.c
+++ b/drivers/opp/cpu.c
@@ -41,7 +41,7 @@
  * the table if any of the mentioned functions have been invoked in the interim.
  */
 int dev_pm_opp_init_cpufreq_table(struct device *dev,
-				  struct cpufreq_frequency_table **table)
+				  struct cpufreq_frequency_table **opp_table)
 {
 	struct dev_pm_opp *opp;
 	struct cpufreq_frequency_table *freq_table = NULL;
@@ -76,7 +76,7 @@ int dev_pm_opp_init_cpufreq_table(struct device *dev,
 	freq_table[i].driver_data = i;
 	freq_table[i].frequency = CPUFREQ_TABLE_END;
 
-	*table = &freq_table[0];
+	*opp_table = &freq_table[0];
 
 out:
 	if (ret)
@@ -94,13 +94,13 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_init_cpufreq_table);
  * Free up the table allocated by dev_pm_opp_init_cpufreq_table
  */
 void dev_pm_opp_free_cpufreq_table(struct device *dev,
-				   struct cpufreq_frequency_table **table)
+				   struct cpufreq_frequency_table **opp_table)
 {
-	if (!table)
+	if (!opp_table)
 		return;
 
-	kfree(*table);
-	*table = NULL;
+	kfree(*opp_table);
+	*opp_table = NULL;
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_free_cpufreq_table);
 #endif	/* CONFIG_CPU_FREQ */
diff --git a/drivers/opp/debugfs.c b/drivers/opp/debugfs.c
index 1b6e5c55c3ed..96a30a032c5f 100644
--- a/drivers/opp/debugfs.c
+++ b/drivers/opp/debugfs.c
@@ -74,6 +74,24 @@ static void opp_debug_create_bw(struct dev_pm_opp *opp,
 	}
 }
 
+static void opp_debug_create_clks(struct dev_pm_opp *opp,
+				  struct opp_table *opp_table,
+				  struct dentry *pdentry)
+{
+	char name[12];
+	int i;
+
+	if (opp_table->clk_count == 1) {
+		debugfs_create_ulong("rate_hz", S_IRUGO, pdentry, &opp->rates[0]);
+		return;
+	}
+
+	for (i = 0; i < opp_table->clk_count; i++) {
+		snprintf(name, sizeof(name), "rate_hz_%d", i);
+		debugfs_create_ulong(name, S_IRUGO, pdentry, &opp->rates[i]);
+	}
+}
+
 static void opp_debug_create_supplies(struct dev_pm_opp *opp,
 				      struct opp_table *opp_table,
 				      struct dentry *pdentry)
@@ -117,10 +135,11 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 	 * Get directory name for OPP.
 	 *
 	 * - Normally rate is unique to each OPP, use it to get unique opp-name.
-	 * - For some devices rate isn't available, use index instead.
+	 * - For some devices rate isn't available or there are multiple, use
+	 *   index instead for them.
 	 */
-	if (likely(opp->rate))
-		id = opp->rate;
+	if (likely(opp_table->clk_count == 1 && opp->rates[0]))
+		id = opp->rates[0];
 	else
 		id = _get_opp_count(opp_table);
 
@@ -134,7 +153,6 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 	debugfs_create_bool("turbo", S_IRUGO, d, &opp->turbo);
 	debugfs_create_bool("suspend", S_IRUGO, d, &opp->suspend);
 	debugfs_create_u32("performance_state", S_IRUGO, d, &opp->pstate);
-	debugfs_create_ulong("rate_hz", S_IRUGO, d, &opp->rate);
 	debugfs_create_u32("level", S_IRUGO, d, &opp->level);
 	debugfs_create_ulong("clock_latency_ns", S_IRUGO, d,
 			     &opp->clock_latency_ns);
@@ -142,6 +160,7 @@ void opp_debug_create_one(struct dev_pm_opp *opp, struct opp_table *opp_table)
 	opp->of_name = of_node_full_name(opp->np);
 	debugfs_create_str("of_name", S_IRUGO, d, (char **)&opp->of_name);
 
+	opp_debug_create_clks(opp, opp_table, d);
 	opp_debug_create_supplies(opp, opp_table, d);
 	opp_debug_create_bw(opp, opp_table, d);
 
diff --git a/drivers/opp/of.c b/drivers/opp/of.c
index eb89c9a75985..605d68673f92 100644
--- a/drivers/opp/of.c
+++ b/drivers/opp/of.c
@@ -242,20 +242,20 @@ void _of_init_opp_table(struct opp_table *opp_table, struct device *dev,
 	opp_table->np = opp_np;
 
 	_opp_table_alloc_required_tables(opp_table, dev, opp_np);
-	of_node_put(opp_np);
 }
 
 void _of_clear_opp_table(struct opp_table *opp_table)
 {
 	_opp_table_free_required_tables(opp_table);
+	of_node_put(opp_table->np);
 }
 
 /*
  * Release all resources previously acquired with a call to
  * _of_opp_alloc_required_opps().
  */
-void _of_opp_free_required_opps(struct opp_table *opp_table,
-				struct dev_pm_opp *opp)
+static void _of_opp_free_required_opps(struct opp_table *opp_table,
+				       struct dev_pm_opp *opp)
 {
 	struct dev_pm_opp **required_opps = opp->required_opps;
 	int i;
@@ -275,6 +275,12 @@ void _of_opp_free_required_opps(struct opp_table *opp_table,
 	kfree(required_opps);
 }
 
+void _of_clear_opp(struct opp_table *opp_table, struct dev_pm_opp *opp)
+{
+	_of_opp_free_required_opps(opp_table, opp);
+	of_node_put(opp->np);
+}
+
 /* Populate all required OPPs which are part of "required-opps" list */
 static int _of_opp_alloc_required_opps(struct opp_table *opp_table,
 				       struct dev_pm_opp *opp)
@@ -767,7 +773,51 @@ void dev_pm_opp_of_remove_table(struct device *dev)
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_of_remove_table);
 
-static int _read_bw(struct dev_pm_opp *new_opp, struct opp_table *table,
+static int _read_rate(struct dev_pm_opp *new_opp, struct opp_table *opp_table,
+		      struct device_node *np)
+{
+	struct property *prop;
+	int i, count, ret;
+	u64 *rates;
+
+	prop = of_find_property(np, "opp-hz", NULL);
+	if (!prop)
+		return -ENODEV;
+
+	count = prop->length / sizeof(u64);
+	if (opp_table->clk_count != count) {
+		pr_err("%s: Count mismatch between opp-hz and clk_count (%d %d)\n",
+		       __func__, count, opp_table->clk_count);
+		return -EINVAL;
+	}
+
+	rates = kmalloc_array(count, sizeof(*rates), GFP_KERNEL);
+	if (!rates)
+		return -ENOMEM;
+
+	ret = of_property_read_u64_array(np, "opp-hz", rates, count);
+	if (ret) {
+		pr_err("%s: Error parsing opp-hz: %d\n", __func__, ret);
+	} else {
+		/*
+		 * Rate is defined as an unsigned long in clk API, and so
+		 * casting explicitly to its type. Must be fixed once rate is 64
+		 * bit guaranteed in clk API.
+		 */
+		for (i = 0; i < count; i++) {
+			new_opp->rates[i] = (unsigned long)rates[i];
+
+			/* This will happen for frequencies > 4.29 GHz */
+			WARN_ON(new_opp->rates[i] != rates[i]);
+		}
+	}
+
+	kfree(rates);
+
+	return ret;
+}
+
+static int _read_bw(struct dev_pm_opp *new_opp, struct opp_table *opp_table,
 		    struct device_node *np, bool peak)
 {
 	const char *name = peak ? "opp-peak-kBps" : "opp-avg-kBps";
@@ -780,9 +830,9 @@ static int _read_bw(struct dev_pm_opp *new_opp, struct opp_table *table,
 		return -ENODEV;
 
 	count = prop->length / sizeof(u32);
-	if (table->path_count != count) {
+	if (opp_table->path_count != count) {
 		pr_err("%s: Mismatch between %s and paths (%d %d)\n",
-				__func__, name, count, table->path_count);
+				__func__, name, count, opp_table->path_count);
 		return -EINVAL;
 	}
 
@@ -808,34 +858,27 @@ out:
 	return ret;
 }
 
-static int _read_opp_key(struct dev_pm_opp *new_opp, struct opp_table *table,
-			 struct device_node *np, bool *rate_not_available)
+static int _read_opp_key(struct dev_pm_opp *new_opp,
+			 struct opp_table *opp_table, struct device_node *np)
 {
 	bool found = false;
-	u64 rate;
 	int ret;
 
-	ret = of_property_read_u64(np, "opp-hz", &rate);
-	if (!ret) {
-		/*
-		 * Rate is defined as an unsigned long in clk API, and so
-		 * casting explicitly to its type. Must be fixed once rate is 64
-		 * bit guaranteed in clk API.
-		 */
-		new_opp->rate = (unsigned long)rate;
+	ret = _read_rate(new_opp, opp_table, np);
+	if (!ret)
 		found = true;
-	}
-	*rate_not_available = !!ret;
+	else if (ret != -ENODEV)
+		return ret;
 
 	/*
 	 * Bandwidth consists of peak and average (optional) values:
 	 * opp-peak-kBps = <path1_value path2_value>;
 	 * opp-avg-kBps = <path1_value path2_value>;
 	 */
-	ret = _read_bw(new_opp, table, np, true);
+	ret = _read_bw(new_opp, opp_table, np, true);
 	if (!ret) {
 		found = true;
-		ret = _read_bw(new_opp, table, np, false);
+		ret = _read_bw(new_opp, opp_table, np, false);
 	}
 
 	/* The properties were found but we failed to parse them */
@@ -881,13 +924,12 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
 	struct dev_pm_opp *new_opp;
 	u32 val;
 	int ret;
-	bool rate_not_available = false;
 
 	new_opp = _opp_allocate(opp_table);
 	if (!new_opp)
 		return ERR_PTR(-ENOMEM);
 
-	ret = _read_opp_key(new_opp, opp_table, np, &rate_not_available);
+	ret = _read_opp_key(new_opp, opp_table, np);
 	if (ret < 0) {
 		dev_err(dev, "%s: opp key field not found\n", __func__);
 		goto free_opp;
@@ -895,14 +937,14 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
 
 	/* Check if the OPP supports hardware's hierarchy of versions or not */
 	if (!_opp_is_supported(dev, opp_table, np)) {
-		dev_dbg(dev, "OPP not supported by hardware: %lu\n",
-			new_opp->rate);
+		dev_dbg(dev, "OPP not supported by hardware: %s\n",
+			of_node_full_name(np));
 		goto free_opp;
 	}
 
 	new_opp->turbo = of_property_read_bool(np, "turbo-mode");
 
-	new_opp->np = np;
+	new_opp->np = of_node_get(np);
 	new_opp->dynamic = false;
 	new_opp->available = true;
 
@@ -920,7 +962,7 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
 	if (opp_table->is_genpd)
 		new_opp->pstate = pm_genpd_opp_to_performance_state(dev, new_opp);
 
-	ret = _opp_add(dev, new_opp, opp_table, rate_not_available);
+	ret = _opp_add(dev, new_opp, opp_table);
 	if (ret) {
 		/* Don't return error for duplicate OPPs */
 		if (ret == -EBUSY)
@@ -931,8 +973,8 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
 	/* OPP to select on device suspend */
 	if (of_property_read_bool(np, "opp-suspend")) {
 		if (opp_table->suspend_opp) {
-			/* Pick the OPP with higher rate as suspend OPP */
-			if (new_opp->rate > opp_table->suspend_opp->rate) {
+			/* Pick the OPP with higher rate/bw/level as suspend OPP */
+			if (_opp_compare_key(opp_table, new_opp, opp_table->suspend_opp) == 1) {
 				opp_table->suspend_opp->suspend = false;
 				new_opp->suspend = true;
 				opp_table->suspend_opp = new_opp;
@@ -947,7 +989,7 @@ static struct dev_pm_opp *_opp_add_static_v2(struct opp_table *opp_table,
 		opp_table->clock_latency_ns_max = new_opp->clock_latency_ns;
 
 	pr_debug("%s: turbo:%d rate:%lu uv:%lu uvmin:%lu uvmax:%lu latency:%lu level:%u\n",
-		 __func__, new_opp->turbo, new_opp->rate,
+		 __func__, new_opp->turbo, new_opp->rates[0],
 		 new_opp->supplies[0].u_volt, new_opp->supplies[0].u_volt_min,
 		 new_opp->supplies[0].u_volt_max, new_opp->clock_latency_ns,
 		 new_opp->level);
@@ -1084,7 +1126,7 @@ remove_static_opp:
 	return ret;
 }
 
-static int _of_add_table_indexed(struct device *dev, int index, bool getclk)
+static int _of_add_table_indexed(struct device *dev, int index)
 {
 	struct opp_table *opp_table;
 	int ret, count;
@@ -1100,7 +1142,7 @@ static int _of_add_table_indexed(struct device *dev, int index, bool getclk)
 			index = 0;
 	}
 
-	opp_table = _add_opp_table_indexed(dev, index, getclk);
+	opp_table = _add_opp_table_indexed(dev, index, true);
 	if (IS_ERR(opp_table))
 		return PTR_ERR(opp_table);
 
@@ -1124,11 +1166,11 @@ static void devm_pm_opp_of_table_release(void *data)
 	dev_pm_opp_of_remove_table(data);
 }
 
-static int _devm_of_add_table_indexed(struct device *dev, int index, bool getclk)
+static int _devm_of_add_table_indexed(struct device *dev, int index)
 {
 	int ret;
 
-	ret = _of_add_table_indexed(dev, index, getclk);
+	ret = _of_add_table_indexed(dev, index);
 	if (ret)
 		return ret;
 
@@ -1156,7 +1198,7 @@ static int _devm_of_add_table_indexed(struct device *dev, int index, bool getclk
  */
 int devm_pm_opp_of_add_table(struct device *dev)
 {
-	return _devm_of_add_table_indexed(dev, 0, true);
+	return _devm_of_add_table_indexed(dev, 0);
 }
 EXPORT_SYMBOL_GPL(devm_pm_opp_of_add_table);
 
@@ -1179,7 +1221,7 @@ EXPORT_SYMBOL_GPL(devm_pm_opp_of_add_table);
  */
 int dev_pm_opp_of_add_table(struct device *dev)
 {
-	return _of_add_table_indexed(dev, 0, true);
+	return _of_add_table_indexed(dev, 0);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
 
@@ -1195,7 +1237,7 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table);
  */
 int dev_pm_opp_of_add_table_indexed(struct device *dev, int index)
 {
-	return _of_add_table_indexed(dev, index, true);
+	return _of_add_table_indexed(dev, index);
 }
 EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_indexed);
 
@@ -1208,42 +1250,10 @@ EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_indexed);
  */
 int devm_pm_opp_of_add_table_indexed(struct device *dev, int index)
 {
-	return _devm_of_add_table_indexed(dev, index, true);
+	return _devm_of_add_table_indexed(dev, index);
 }
 EXPORT_SYMBOL_GPL(devm_pm_opp_of_add_table_indexed);
 
-/**
- * dev_pm_opp_of_add_table_noclk() - Initialize indexed opp table from device
- *		tree without getting clk for device.
- * @dev:	device pointer used to lookup OPP table.
- * @index:	Index number.
- *
- * Register the initial OPP table with the OPP library for given device only
- * using the "operating-points-v2" property. Do not try to get the clk for the
- * device.
- *
- * Return: Refer to dev_pm_opp_of_add_table() for return values.
- */
-int dev_pm_opp_of_add_table_noclk(struct device *dev, int index)
-{
-	return _of_add_table_indexed(dev, index, false);
-}
-EXPORT_SYMBOL_GPL(dev_pm_opp_of_add_table_noclk);
-
-/**
- * devm_pm_opp_of_add_table_noclk() - Initialize indexed opp table from device
- *		tree without getting clk for device.
- * @dev:	device pointer used to lookup OPP table.
- * @index:	Index number.
- *
- * This is a resource-managed variant of dev_pm_opp_of_add_table_noclk().
- */
-int devm_pm_opp_of_add_table_noclk(struct device *dev, int index)
-{
-	return _devm_of_add_table_indexed(dev, index, false);
-}
-EXPORT_SYMBOL_GPL(devm_pm_opp_of_add_table_noclk);
-
 /* CPU device specific helpers */
 
 /**
diff --git a/drivers/opp/opp.h b/drivers/opp/opp.h
index 45e3a55239a1..3a6e077df386 100644
--- a/drivers/opp/opp.h
+++ b/drivers/opp/opp.h
@@ -28,6 +28,27 @@ extern struct mutex opp_table_lock;
 
 extern struct list_head opp_tables, lazy_opp_tables;
 
+/* OPP Config flags */
+#define OPP_CONFIG_CLK			BIT(0)
+#define OPP_CONFIG_REGULATOR		BIT(1)
+#define OPP_CONFIG_REGULATOR_HELPER	BIT(2)
+#define OPP_CONFIG_PROP_NAME		BIT(3)
+#define OPP_CONFIG_SUPPORTED_HW		BIT(4)
+#define OPP_CONFIG_GENPD		BIT(5)
+
+/**
+ * struct opp_config_data - data for set config operations
+ * @opp_table: OPP table
+ * @flags: OPP config flags
+ *
+ * This structure stores the OPP config information for each OPP table
+ * configuration by the callers.
+ */
+struct opp_config_data {
+	struct opp_table *opp_table;
+	unsigned int flags;
+};
+
 /*
  * Internal data structure organization with the OPP layer library is as
  * follows:
@@ -58,7 +79,7 @@ extern struct list_head opp_tables, lazy_opp_tables;
  * @suspend:	true if suspend OPP
  * @removed:	flag indicating that OPP's reference is dropped by OPP core.
  * @pstate: Device's power domain's performance state.
- * @rate:	Frequency in hertz
+ * @rates:	Frequencies in hertz
  * @level:	Performance level
  * @supplies:	Power supplies voltage/current values
  * @bandwidth:	Interconnect bandwidth values
@@ -81,7 +102,7 @@ struct dev_pm_opp {
 	bool suspend;
 	bool removed;
 	unsigned int pstate;
-	unsigned long rate;
+	unsigned long *rates;
 	unsigned int level;
 
 	struct dev_pm_opp_supply *supplies;
@@ -138,7 +159,7 @@ enum opp_table_access {
  * @clock_latency_ns_max: Max clock latency in nanoseconds.
  * @parsed_static_opps: Count of devices for which OPPs are initialized from DT.
  * @shared_opp: OPP is shared between multiple devices.
- * @current_rate: Currently configured frequency.
+ * @rate_clk_single: Currently configured frequency for single clk.
  * @current_opp: Currently configured OPP for the table.
  * @suspend_opp: Pointer to OPP to be used during device suspend.
  * @genpd_virt_dev_lock: Mutex protecting the genpd virtual device pointers.
@@ -149,7 +170,11 @@ enum opp_table_access {
  * @supported_hw: Array of version number to support.
  * @supported_hw_count: Number of elements in supported_hw array.
  * @prop_name: A name to postfix to many DT properties, while parsing them.
- * @clk: Device's clock handle
+ * @config_clks: Platform specific config_clks() callback.
+ * @clks: Device's clock handles, for multiple clocks.
+ * @clk: Device's clock handle, for single clock.
+ * @clk_count: Number of clocks.
+ * @config_regulators: Platform specific config_regulators() callback.
  * @regulators: Supply regulators
  * @regulator_count: Number of power supply regulators. Its value can be -1
  * (uninitialized), 0 (no opp-microvolt property) or > 0 (has opp-microvolt
@@ -159,9 +184,6 @@ enum opp_table_access {
  * @enabled: Set to true if the device's resources are enabled/configured.
  * @genpd_performance_state: Device's power domain support performance state.
  * @is_genpd: Marks if the OPP table belongs to a genpd.
- * @set_opp: Platform specific set_opp callback
- * @sod_supplies: Set opp data supplies
- * @set_opp_data: Data to be passed to set_opp callback
  * @dentry:	debugfs dentry pointer of the real device directory (not links).
  * @dentry_name: Name of the real dentry.
  *
@@ -188,7 +210,7 @@ struct opp_table {
 
 	unsigned int parsed_static_opps;
 	enum opp_table_access shared_opp;
-	unsigned long current_rate;
+	unsigned long rate_clk_single;
 	struct dev_pm_opp *current_opp;
 	struct dev_pm_opp *suspend_opp;
 
@@ -200,7 +222,11 @@ struct opp_table {
 	unsigned int *supported_hw;
 	unsigned int supported_hw_count;
 	const char *prop_name;
+	config_clks_t config_clks;
+	struct clk **clks;
 	struct clk *clk;
+	int clk_count;
+	config_regulators_t config_regulators;
 	struct regulator **regulators;
 	int regulator_count;
 	struct icc_path **paths;
@@ -209,10 +235,6 @@ struct opp_table {
 	bool genpd_performance_state;
 	bool is_genpd;
 
-	int (*set_opp)(struct dev_pm_set_opp_data *data);
-	struct dev_pm_opp_supply *sod_supplies;
-	struct dev_pm_set_opp_data *set_opp_data;
-
 #ifdef CONFIG_DEBUG_FS
 	struct dentry *dentry;
 	char dentry_name[NAME_MAX];
@@ -228,8 +250,8 @@ struct opp_table *_find_opp_table(struct device *dev);
 struct opp_device *_add_opp_dev(const struct device *dev, struct opp_table *opp_table);
 struct dev_pm_opp *_opp_allocate(struct opp_table *opp_table);
 void _opp_free(struct dev_pm_opp *opp);
-int _opp_compare_key(struct dev_pm_opp *opp1, struct dev_pm_opp *opp2);
-int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table, bool rate_not_available);
+int _opp_compare_key(struct opp_table *opp_table, struct dev_pm_opp *opp1, struct dev_pm_opp *opp2);
+int _opp_add(struct device *dev, struct dev_pm_opp *new_opp, struct opp_table *opp_table);
 int _opp_add_v1(struct opp_table *opp_table, struct device *dev, unsigned long freq, long u_volt, bool dynamic);
 void _dev_pm_opp_cpumask_remove_table(const struct cpumask *cpumask, int last_cpu);
 struct opp_table *_add_opp_table_indexed(struct device *dev, int index, bool getclk);
@@ -245,14 +267,12 @@ static inline bool lazy_linking_pending(struct opp_table *opp_table)
 void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index);
 void _of_clear_opp_table(struct opp_table *opp_table);
 struct opp_table *_managed_opp(struct device *dev, int index);
-void _of_opp_free_required_opps(struct opp_table *opp_table,
-				struct dev_pm_opp *opp);
+void _of_clear_opp(struct opp_table *opp_table, struct dev_pm_opp *opp);
 #else
 static inline void _of_init_opp_table(struct opp_table *opp_table, struct device *dev, int index) {}
 static inline void _of_clear_opp_table(struct opp_table *opp_table) {}
 static inline struct opp_table *_managed_opp(struct device *dev, int index) { return NULL; }
-static inline void _of_opp_free_required_opps(struct opp_table *opp_table,
-					      struct dev_pm_opp *opp) {}
+static inline void _of_clear_opp(struct opp_table *opp_table, struct dev_pm_opp *opp) {}
 #endif
 
 #ifdef CONFIG_DEBUG_FS
diff --git a/drivers/opp/ti-opp-supply.c b/drivers/opp/ti-opp-supply.c
index bd4771f388ab..8f3f13fbbb25 100644
--- a/drivers/opp/ti-opp-supply.c
+++ b/drivers/opp/ti-opp-supply.c
@@ -36,11 +36,15 @@ struct ti_opp_supply_optimum_voltage_table {
  * @vdd_table:	Optimized voltage mapping table
  * @num_vdd_table: number of entries in vdd_table
  * @vdd_absolute_max_voltage_uv: absolute maximum voltage in UV for the supply
+ * @old_supplies: Placeholder for supplies information for old OPP.
+ * @new_supplies: Placeholder for supplies information for new OPP.
  */
 struct ti_opp_supply_data {
 	struct ti_opp_supply_optimum_voltage_table *vdd_table;
 	u32 num_vdd_table;
 	u32 vdd_absolute_max_voltage_uv;
+	struct dev_pm_opp_supply old_supplies[2];
+	struct dev_pm_opp_supply new_supplies[2];
 };
 
 static struct ti_opp_supply_data opp_data;
@@ -266,27 +270,32 @@ static int _opp_set_voltage(struct device *dev,
 	return 0;
 }
 
-/**
- * ti_opp_supply_set_opp() - do the opp supply transition
- * @data:	information on regulators and new and old opps provided by
- *		opp core to use in transition
- *
- * Return: If successful, 0, else appropriate error value.
- */
-static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data)
+/* Do the opp supply transition */
+static int ti_opp_config_regulators(struct device *dev,
+			struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp,
+			struct regulator **regulators, unsigned int count)
 {
-	struct dev_pm_opp_supply *old_supply_vdd = &data->old_opp.supplies[0];
-	struct dev_pm_opp_supply *old_supply_vbb = &data->old_opp.supplies[1];
-	struct dev_pm_opp_supply *new_supply_vdd = &data->new_opp.supplies[0];
-	struct dev_pm_opp_supply *new_supply_vbb = &data->new_opp.supplies[1];
-	struct device *dev = data->dev;
-	unsigned long old_freq = data->old_opp.rate, freq = data->new_opp.rate;
-	struct clk *clk = data->clk;
-	struct regulator *vdd_reg = data->regulators[0];
-	struct regulator *vbb_reg = data->regulators[1];
+	struct dev_pm_opp_supply *old_supply_vdd = &opp_data.old_supplies[0];
+	struct dev_pm_opp_supply *old_supply_vbb = &opp_data.old_supplies[1];
+	struct dev_pm_opp_supply *new_supply_vdd = &opp_data.new_supplies[0];
+	struct dev_pm_opp_supply *new_supply_vbb = &opp_data.new_supplies[1];
+	struct regulator *vdd_reg = regulators[0];
+	struct regulator *vbb_reg = regulators[1];
+	unsigned long old_freq, freq;
 	int vdd_uv;
 	int ret;
 
+	/* We must have two regulators here */
+	WARN_ON(count != 2);
+
+	/* Fetch supplies and freq information from OPP core */
+	ret = dev_pm_opp_get_supplies(new_opp, opp_data.new_supplies);
+	WARN_ON(ret);
+
+	old_freq = dev_pm_opp_get_freq(old_opp);
+	freq = dev_pm_opp_get_freq(new_opp);
+	WARN_ON(!old_freq || !freq);
+
 	vdd_uv = _get_optimal_vdd_voltage(dev, &opp_data,
 					  new_supply_vdd->u_volt);
 
@@ -303,39 +312,24 @@ static int ti_opp_supply_set_opp(struct dev_pm_set_opp_data *data)
 		ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb");
 		if (ret)
 			goto restore_voltage;
-	}
-
-	/* Change frequency */
-	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n",
-		__func__, old_freq, freq);
-
-	ret = clk_set_rate(clk, freq);
-	if (ret) {
-		dev_err(dev, "%s: failed to set clock rate: %d\n", __func__,
-			ret);
-		goto restore_voltage;
-	}
-
-	/* Scaling down? Scale voltage after frequency */
-	if (freq < old_freq) {
+	} else {
 		ret = _opp_set_voltage(dev, new_supply_vbb, 0, vbb_reg, "vbb");
 		if (ret)
-			goto restore_freq;
+			goto restore_voltage;
 
 		ret = _opp_set_voltage(dev, new_supply_vdd, vdd_uv, vdd_reg,
 				       "vdd");
 		if (ret)
-			goto restore_freq;
+			goto restore_voltage;
 	}
 
 	return 0;
 
-restore_freq:
-	ret = clk_set_rate(clk, old_freq);
-	if (ret)
-		dev_err(dev, "%s: failed to restore old-freq (%lu Hz)\n",
-			__func__, old_freq);
 restore_voltage:
+	/* Fetch old supplies information only if required */
+	ret = dev_pm_opp_get_supplies(old_opp, opp_data.old_supplies);
+	WARN_ON(ret);
+
 	/* This shouldn't harm even if the voltages weren't updated earlier */
 	if (old_supply_vdd->u_volt) {
 		ret = _opp_set_voltage(dev, old_supply_vbb, 0, vbb_reg, "vbb");
@@ -405,9 +399,8 @@ static int ti_opp_supply_probe(struct platform_device *pdev)
 			return ret;
 	}
 
-	ret = PTR_ERR_OR_ZERO(dev_pm_opp_register_set_opp_helper(cpu_dev,
-								 ti_opp_supply_set_opp));
-	if (ret)
+	ret = dev_pm_opp_set_config_regulators(cpu_dev, ti_opp_config_regulators);
+	if (ret < 0)
 		_free_optimized_voltages(dev, &opp_data);
 
 	return ret;
diff --git a/drivers/soc/tegra/common.c b/drivers/soc/tegra/common.c
index 32c346b72635..dff6d5ef4e46 100644
--- a/drivers/soc/tegra/common.c
+++ b/drivers/soc/tegra/common.c
@@ -107,30 +107,47 @@ int devm_tegra_core_dev_init_opp_table(struct device *dev,
 {
 	u32 hw_version;
 	int err;
-
-	err = devm_pm_opp_set_clkname(dev, NULL);
-	if (err) {
-		dev_err(dev, "failed to set OPP clk: %d\n", err);
-		return err;
-	}
-
-	/* Tegra114+ doesn't support OPP yet */
-	if (!of_machine_is_compatible("nvidia,tegra20") &&
-	    !of_machine_is_compatible("nvidia,tegra30"))
-		return -ENODEV;
-
-	if (of_machine_is_compatible("nvidia,tegra20"))
+	/*
+	 * The clk's connection id to set is NULL and this is a NULL terminated
+	 * array, hence two NULL entries.
+	 */
+	const char *clk_names[] = { NULL, NULL };
+	struct dev_pm_opp_config config = {
+		/*
+		 * For some devices we don't have any OPP table in the DT, and
+		 * in order to use the same code path for all the devices, we
+		 * create a dummy OPP table for them via this. The dummy OPP
+		 * table is only capable of doing clk_set_rate() on invocation
+		 * of dev_pm_opp_set_rate() and doesn't provide any other
+		 * functionality.
+		 */
+		.clk_names = clk_names,
+	};
+
+	if (of_machine_is_compatible("nvidia,tegra20")) {
 		hw_version = BIT(tegra_sku_info.soc_process_id);
-	else
+		config.supported_hw = &hw_version;
+		config.supported_hw_count = 1;
+	} else if (of_machine_is_compatible("nvidia,tegra30")) {
 		hw_version = BIT(tegra_sku_info.soc_speedo_id);
+		config.supported_hw = &hw_version;
+		config.supported_hw_count = 1;
+	}
 
-	err = devm_pm_opp_set_supported_hw(dev, &hw_version, 1);
+	err = devm_pm_opp_set_config(dev, &config);
 	if (err) {
-		dev_err(dev, "failed to set OPP supported HW: %d\n", err);
+		dev_err(dev, "failed to set OPP config: %d\n", err);
 		return err;
 	}
 
 	/*
+	 * Tegra114+ doesn't support OPP yet, return early for non tegra20/30
+	 * case.
+	 */
+	if (!config.supported_hw)
+		return -ENODEV;
+
+	/*
 	 * Older device-trees have an empty OPP table, we will get
 	 * -ENODEV from devm_pm_opp_of_add_table() in this case.
 	 */
diff --git a/drivers/soc/tegra/pmc.c b/drivers/soc/tegra/pmc.c
index 5611d14d3ba2..6a4b8f7e7948 100644
--- a/drivers/soc/tegra/pmc.c
+++ b/drivers/soc/tegra/pmc.c
@@ -1384,7 +1384,7 @@ tegra_pmc_core_pd_opp_to_performance_state(struct generic_pm_domain *genpd,
 static int tegra_pmc_core_pd_add(struct tegra_pmc *pmc, struct device_node *np)
 {
 	struct generic_pm_domain *genpd;
-	const char *rname = "core";
+	const char *rname[] = { "core", NULL};
 	int err;
 
 	genpd = devm_kzalloc(pmc->dev, sizeof(*genpd), GFP_KERNEL);
@@ -1395,7 +1395,7 @@ static int tegra_pmc_core_pd_add(struct tegra_pmc *pmc, struct device_node *np)
 	genpd->set_performance_state = tegra_pmc_core_pd_set_performance_state;
 	genpd->opp_to_performance_state = tegra_pmc_core_pd_opp_to_performance_state;
 
-	err = devm_pm_opp_set_regulators(pmc->dev, &rname, 1);
+	err = devm_pm_opp_set_regulators(pmc->dev, rname);
 	if (err)
 		return dev_err_probe(pmc->dev, err,
 				     "failed to set core OPP regulator\n");
diff --git a/include/linux/pm_opp.h b/include/linux/pm_opp.h
index 6708b4ec244d..dc1fb5890792 100644
--- a/include/linux/pm_opp.h
+++ b/include/linux/pm_opp.h
@@ -57,37 +57,39 @@ struct dev_pm_opp_icc_bw {
 	u32 peak;
 };
 
-/**
- * struct dev_pm_opp_info - OPP freq/voltage/current values
- * @rate:	Target clk rate in hz
- * @supplies:	Array of voltage/current values for all power supplies
- *
- * This structure stores the freq/voltage/current values for a single OPP.
- */
-struct dev_pm_opp_info {
-	unsigned long rate;
-	struct dev_pm_opp_supply *supplies;
-};
+typedef int (*config_regulators_t)(struct device *dev,
+			struct dev_pm_opp *old_opp, struct dev_pm_opp *new_opp,
+			struct regulator **regulators, unsigned int count);
+
+typedef int (*config_clks_t)(struct device *dev, struct opp_table *opp_table,
+			struct dev_pm_opp *opp, void *data, bool scaling_down);
 
 /**
- * struct dev_pm_set_opp_data - Set OPP data
- * @old_opp:	Old OPP info
- * @new_opp:	New OPP info
- * @regulators:	Array of regulator pointers
- * @regulator_count: Number of regulators
- * @clk:	Pointer to clk
- * @dev:	Pointer to the struct device
+ * struct dev_pm_opp_config - Device OPP configuration values
+ * @clk_names: Clk names, NULL terminated array.
+ * @config_clks: Custom set clk helper.
+ * @prop_name: Name to postfix to properties.
+ * @config_regulators: Custom set regulator helper.
+ * @supported_hw: Array of hierarchy of versions to match.
+ * @supported_hw_count: Number of elements in the array.
+ * @regulator_names: Array of pointers to the names of the regulator, NULL terminated.
+ * @genpd_names: Null terminated array of pointers containing names of genpd to
+ *		 attach.
+ * @virt_devs: Pointer to return the array of virtual devices.
  *
- * This structure contains all information required for setting an OPP.
+ * This structure contains platform specific OPP configurations for the device.
  */
-struct dev_pm_set_opp_data {
-	struct dev_pm_opp_info old_opp;
-	struct dev_pm_opp_info new_opp;
-
-	struct regulator **regulators;
-	unsigned int regulator_count;
-	struct clk *clk;
-	struct device *dev;
+struct dev_pm_opp_config {
+	/* NULL terminated */
+	const char * const *clk_names;
+	config_clks_t config_clks;
+	const char *prop_name;
+	config_regulators_t config_regulators;
+	const unsigned int *supported_hw;
+	unsigned int supported_hw_count;
+	const char * const *regulator_names;
+	const char * const *genpd_names;
+	struct device ***virt_devs;
 };
 
 #if defined(CONFIG_PM_OPP)
@@ -97,6 +99,8 @@ void dev_pm_opp_put_opp_table(struct opp_table *opp_table);
 
 unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
 
+int dev_pm_opp_get_supplies(struct dev_pm_opp *opp, struct dev_pm_opp_supply *supplies);
+
 unsigned long dev_pm_opp_get_power(struct dev_pm_opp *opp);
 
 unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
@@ -119,8 +123,6 @@ struct dev_pm_opp *dev_pm_opp_find_freq_exact(struct device *dev,
 					      bool available);
 struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 					      unsigned long *freq);
-struct dev_pm_opp *dev_pm_opp_find_freq_ceil_by_volt(struct device *dev,
-						     unsigned long u_volt);
 
 struct dev_pm_opp *dev_pm_opp_find_level_exact(struct device *dev,
 					       unsigned int level);
@@ -154,23 +156,13 @@ int dev_pm_opp_disable(struct device *dev, unsigned long freq);
 int dev_pm_opp_register_notifier(struct device *dev, struct notifier_block *nb);
 int dev_pm_opp_unregister_notifier(struct device *dev, struct notifier_block *nb);
 
-struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count);
-void dev_pm_opp_put_supported_hw(struct opp_table *opp_table);
-int devm_pm_opp_set_supported_hw(struct device *dev, const u32 *versions, unsigned int count);
-struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name);
-void dev_pm_opp_put_prop_name(struct opp_table *opp_table);
-struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count);
-void dev_pm_opp_put_regulators(struct opp_table *opp_table);
-int devm_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count);
-struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name);
-void dev_pm_opp_put_clkname(struct opp_table *opp_table);
-int devm_pm_opp_set_clkname(struct device *dev, const char *name);
-struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
-void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table);
-int devm_pm_opp_register_set_opp_helper(struct device *dev, int (*set_opp)(struct dev_pm_set_opp_data *data));
-struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs);
-void dev_pm_opp_detach_genpd(struct opp_table *opp_table);
-int devm_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs);
+int dev_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config);
+int devm_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config);
+void dev_pm_opp_clear_config(int token);
+int dev_pm_opp_config_clks_simple(struct device *dev,
+		struct opp_table *opp_table, struct dev_pm_opp *opp, void *data,
+		bool scaling_down);
+
 struct dev_pm_opp *dev_pm_opp_xlate_required_opp(struct opp_table *src_table, struct opp_table *dst_table, struct dev_pm_opp *src_opp);
 int dev_pm_opp_xlate_performance_state(struct opp_table *src_table, struct opp_table *dst_table, unsigned int pstate);
 int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq);
@@ -198,6 +190,11 @@ static inline unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp)
 	return 0;
 }
 
+static inline int dev_pm_opp_get_supplies(struct dev_pm_opp *opp, struct dev_pm_opp_supply *supplies)
+{
+	return -EOPNOTSUPP;
+}
+
 static inline unsigned long dev_pm_opp_get_power(struct dev_pm_opp *opp)
 {
 	return 0;
@@ -274,12 +271,6 @@ static inline struct dev_pm_opp *dev_pm_opp_find_freq_floor(struct device *dev,
 	return ERR_PTR(-EOPNOTSUPP);
 }
 
-static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil_by_volt(struct device *dev,
-					unsigned long u_volt)
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
 static inline struct dev_pm_opp *dev_pm_opp_find_freq_ceil(struct device *dev,
 					unsigned long *freq)
 {
@@ -342,79 +333,21 @@ static inline int dev_pm_opp_unregister_notifier(struct device *dev, struct noti
 	return -EOPNOTSUPP;
 }
 
-static inline struct opp_table *dev_pm_opp_set_supported_hw(struct device *dev,
-							    const u32 *versions,
-							    unsigned int count)
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void dev_pm_opp_put_supported_hw(struct opp_table *opp_table) {}
-
-static inline int devm_pm_opp_set_supported_hw(struct device *dev,
-					       const u32 *versions,
-					       unsigned int count)
-{
-	return -EOPNOTSUPP;
-}
-
-static inline struct opp_table *dev_pm_opp_register_set_opp_helper(struct device *dev,
-			int (*set_opp)(struct dev_pm_set_opp_data *data))
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void dev_pm_opp_unregister_set_opp_helper(struct opp_table *opp_table) {}
-
-static inline int devm_pm_opp_register_set_opp_helper(struct device *dev,
-				    int (*set_opp)(struct dev_pm_set_opp_data *data))
-{
-	return -EOPNOTSUPP;
-}
-
-static inline struct opp_table *dev_pm_opp_set_prop_name(struct device *dev, const char *name)
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void dev_pm_opp_put_prop_name(struct opp_table *opp_table) {}
-
-static inline struct opp_table *dev_pm_opp_set_regulators(struct device *dev, const char * const names[], unsigned int count)
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void dev_pm_opp_put_regulators(struct opp_table *opp_table) {}
-
-static inline int devm_pm_opp_set_regulators(struct device *dev,
-					     const char * const names[],
-					     unsigned int count)
+static inline int dev_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config)
 {
 	return -EOPNOTSUPP;
 }
 
-static inline struct opp_table *dev_pm_opp_set_clkname(struct device *dev, const char *name)
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void dev_pm_opp_put_clkname(struct opp_table *opp_table) {}
-
-static inline int devm_pm_opp_set_clkname(struct device *dev, const char *name)
+static inline int devm_pm_opp_set_config(struct device *dev, struct dev_pm_opp_config *config)
 {
 	return -EOPNOTSUPP;
 }
 
-static inline struct opp_table *dev_pm_opp_attach_genpd(struct device *dev, const char * const *names, struct device ***virt_devs)
-{
-	return ERR_PTR(-EOPNOTSUPP);
-}
-
-static inline void dev_pm_opp_detach_genpd(struct opp_table *opp_table) {}
+static inline void dev_pm_opp_clear_config(int token) {}
 
-static inline int devm_pm_opp_attach_genpd(struct device *dev,
-					   const char * const *names,
-					   struct device ***virt_devs)
+static inline int dev_pm_opp_config_clks_simple(struct device *dev,
+		struct opp_table *opp_table, struct dev_pm_opp *opp, void *data,
+		bool scaling_down)
 {
 	return -EOPNOTSUPP;
 }
@@ -469,8 +402,6 @@ static inline int dev_pm_opp_sync_regulators(struct device *dev)
 int dev_pm_opp_of_add_table(struct device *dev);
 int dev_pm_opp_of_add_table_indexed(struct device *dev, int index);
 int devm_pm_opp_of_add_table_indexed(struct device *dev, int index);
-int dev_pm_opp_of_add_table_noclk(struct device *dev, int index);
-int devm_pm_opp_of_add_table_noclk(struct device *dev, int index);
 void dev_pm_opp_of_remove_table(struct device *dev);
 int devm_pm_opp_of_add_table(struct device *dev);
 int dev_pm_opp_of_cpumask_add_table(const struct cpumask *cpumask);
@@ -501,16 +432,6 @@ static inline int devm_pm_opp_of_add_table_indexed(struct device *dev, int index
 	return -EOPNOTSUPP;
 }
 
-static inline int dev_pm_opp_of_add_table_noclk(struct device *dev, int index)
-{
-	return -EOPNOTSUPP;
-}
-
-static inline int devm_pm_opp_of_add_table_noclk(struct device *dev, int index)
-{
-	return -EOPNOTSUPP;
-}
-
 static inline void dev_pm_opp_of_remove_table(struct device *dev)
 {
 }
@@ -565,4 +486,149 @@ static inline int dev_pm_opp_of_find_icc_paths(struct device *dev, struct opp_ta
 }
 #endif
 
+/* OPP Configuration helpers */
+
+/* Regulators helpers */
+static inline int dev_pm_opp_set_regulators(struct device *dev,
+					    const char * const names[])
+{
+	struct dev_pm_opp_config config = {
+		.regulator_names = names,
+	};
+
+	return dev_pm_opp_set_config(dev, &config);
+}
+
+static inline void dev_pm_opp_put_regulators(int token)
+{
+	dev_pm_opp_clear_config(token);
+}
+
+static inline int devm_pm_opp_set_regulators(struct device *dev,
+					     const char * const names[])
+{
+	struct dev_pm_opp_config config = {
+		.regulator_names = names,
+	};
+
+	return devm_pm_opp_set_config(dev, &config);
+}
+
+/* Supported-hw helpers */
+static inline int dev_pm_opp_set_supported_hw(struct device *dev,
+					      const u32 *versions,
+					      unsigned int count)
+{
+	struct dev_pm_opp_config config = {
+		.supported_hw = versions,
+		.supported_hw_count = count,
+	};
+
+	return dev_pm_opp_set_config(dev, &config);
+}
+
+static inline void dev_pm_opp_put_supported_hw(int token)
+{
+	dev_pm_opp_clear_config(token);
+}
+
+static inline int devm_pm_opp_set_supported_hw(struct device *dev,
+					       const u32 *versions,
+					       unsigned int count)
+{
+	struct dev_pm_opp_config config = {
+		.supported_hw = versions,
+		.supported_hw_count = count,
+	};
+
+	return devm_pm_opp_set_config(dev, &config);
+}
+
+/* clkname helpers */
+static inline int dev_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+	const char *names[] = { name, NULL };
+	struct dev_pm_opp_config config = {
+		.clk_names = names,
+	};
+
+	return dev_pm_opp_set_config(dev, &config);
+}
+
+static inline void dev_pm_opp_put_clkname(int token)
+{
+	dev_pm_opp_clear_config(token);
+}
+
+static inline int devm_pm_opp_set_clkname(struct device *dev, const char *name)
+{
+	const char *names[] = { name, NULL };
+	struct dev_pm_opp_config config = {
+		.clk_names = names,
+	};
+
+	return devm_pm_opp_set_config(dev, &config);
+}
+
+/* config-regulators helpers */
+static inline int dev_pm_opp_set_config_regulators(struct device *dev,
+						   config_regulators_t helper)
+{
+	struct dev_pm_opp_config config = {
+		.config_regulators = helper,
+	};
+
+	return dev_pm_opp_set_config(dev, &config);
+}
+
+static inline void dev_pm_opp_put_config_regulators(int token)
+{
+	dev_pm_opp_clear_config(token);
+}
+
+/* genpd helpers */
+static inline int dev_pm_opp_attach_genpd(struct device *dev,
+					  const char * const *names,
+					  struct device ***virt_devs)
+{
+	struct dev_pm_opp_config config = {
+		.genpd_names = names,
+		.virt_devs = virt_devs,
+	};
+
+	return dev_pm_opp_set_config(dev, &config);
+}
+
+static inline void dev_pm_opp_detach_genpd(int token)
+{
+	dev_pm_opp_clear_config(token);
+}
+
+static inline int devm_pm_opp_attach_genpd(struct device *dev,
+					   const char * const *names,
+					   struct device ***virt_devs)
+{
+	struct dev_pm_opp_config config = {
+		.genpd_names = names,
+		.virt_devs = virt_devs,
+	};
+
+	return devm_pm_opp_set_config(dev, &config);
+}
+
+/* prop-name helpers */
+static inline int dev_pm_opp_set_prop_name(struct device *dev, const char *name)
+{
+	struct dev_pm_opp_config config = {
+		.prop_name = name,
+	};
+
+	return dev_pm_opp_set_config(dev, &config);
+}
+
+static inline void dev_pm_opp_put_prop_name(int token)
+{
+	dev_pm_opp_clear_config(token);
+}
+
 #endif		/* __LINUX_OPP_H__ */
diff --git a/include/trace/events/power.h b/include/trace/events/power.h
index c708521e4ed5..77f14f7a11d4 100644
--- a/include/trace/events/power.h
+++ b/include/trace/events/power.h
@@ -40,6 +40,28 @@ DEFINE_EVENT(cpu, cpu_idle,
 	TP_ARGS(state, cpu_id)
 );
 
+TRACE_EVENT(cpu_idle_miss,
+
+	TP_PROTO(unsigned int cpu_id, unsigned int state, bool below),
+
+	TP_ARGS(cpu_id, state, below),
+
+	TP_STRUCT__entry(
+		__field(u32,		cpu_id)
+		__field(u32,		state)
+		__field(bool,		below)
+	),
+
+	TP_fast_assign(
+		__entry->cpu_id = cpu_id;
+		__entry->state = state;
+		__entry->below = below;
+	),
+
+	TP_printk("cpu_id=%lu state=%lu type=%s", (unsigned long)__entry->cpu_id,
+		(unsigned long)__entry->state, (__entry->below)?"below":"above")
+);
+
 TRACE_EVENT(powernv_throttle,
 
 	TP_PROTO(int chip_id, const char *reason, int pmax),
author	Linus Torvalds	2022-08-08 14:29:00 -0700
committer	Linus Torvalds	2022-08-08 14:29:00 -0700
commit	507f811f205c17fd6f64e8d34d4bf91cd01b07a2 (patch)
tree	72f4abfa45964c4cb4f06cdaaf463fd84e5e7581
parent	033c88d58b66a5bf61a9a4f0029c4fb771f0555e (diff)
parent	c3f834df191ac2e5e58c215b9110e7e19553100f (diff)