diff options
| author | Mathieu Malaterre | 2018-02-11 22:59:18 +0800 |
|---|---|---|
| committer | Ley Foon Tan | 2018-02-11 23:04:47 +0800 |
| commit | 5d13c73179983f8692adf397e65f2f57c613a917 (patch) | |
| tree | 80458c02e8798b906aa83f621a8d354ca161fe22 | |
| parent | d8a5b80568a9cb66810e75b182018e9edb68e8ff (diff) | |
nios2: dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
| -rw-r--r-- | arch/nios2/boot/dts/3c120_devboard.dts | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/arch/nios2/boot/dts/3c120_devboard.dts b/arch/nios2/boot/dts/3c120_devboard.dts index 36ccdf05837d..56f4b5df6d65 100644 --- a/arch/nios2/boot/dts/3c120_devboard.dts +++ b/arch/nios2/boot/dts/3c120_devboard.dts @@ -29,7 +29,7 @@ #address-cells = <1>; #size-cells = <0>; - cpu: cpu@0x0 { + cpu: cpu@0 { device_type = "cpu"; compatible = "altr,nios2-1.0"; reg = <0x00000000>; @@ -69,7 +69,7 @@ compatible = "altr,avalon", "simple-bus"; bus-frequency = <125000000>; - pb_cpu_to_io: bridge@0x8000000 { + pb_cpu_to_io: bridge@8000000 { compatible = "simple-bus"; reg = <0x08000000 0x00800000>; #address-cells = <1>; @@ -83,7 +83,7 @@ <0x00008000 0x08008000 0x00000020>, <0x00400000 0x08400000 0x00000020>; - timer_1ms: timer@0x400000 { + timer_1ms: timer@400000 { compatible = "altr,timer-1.0"; reg = <0x00400000 0x00000020>; interrupt-parent = <&cpu>; @@ -91,7 +91,7 @@ clock-frequency = <125000000>; }; - timer_0: timer@0x8000 { + timer_0: timer@8000 { compatible = "altr,timer-1.0"; reg = < 0x00008000 0x00000020 >; interrupt-parent = < &cpu >; @@ -99,14 +99,14 @@ clock-frequency = < 125000000 >; }; - jtag_uart: serial@0x4d50 { + jtag_uart: serial@4d50 { compatible = "altr,juart-1.0"; reg = <0x00004d50 0x00000008>; interrupt-parent = <&cpu>; interrupts = <1>; }; - tse_mac: ethernet@0x4000 { + tse_mac: ethernet@4000 { compatible = "altr,tse-1.0"; reg = <0x00004000 0x00000400>, <0x00004400 0x00000040>, @@ -133,7 +133,7 @@ }; }; - uart: serial@0x4c80 { + uart: serial@4c80 { compatible = "altr,uart-1.0"; reg = <0x00004c80 0x00000020>; interrupt-parent = <&cpu>; @@ -143,7 +143,7 @@ }; }; - cfi_flash_64m: flash@0x0 { + cfi_flash_64m: flash@0 { compatible = "cfi-flash"; reg = <0x00000000 0x04000000>; bank-width = <2>; |