Merge tag 'regulator-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown: "A quiet regulator API release, a few new drivers and some fixes but nothing too notable. There will also be some updates for the PWM regulator coming through the PWM tree which provide much smoother operation when taking over an already running PWM regulator after boot using some new PWM APIs. Summary: - Support for configuration of the initial suspend state from DT. - New drivers for Mediatek MT6323, Ricoh RN5T567 and X-Powers AXP809" * tag 'regulator-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (38 commits) regulator: da9053/52: Fix incorrectly stated minimum and maximum voltage limits regulator: mt6323: Constify struct regulator_ops regulator: mt6323: Fix module description regulator: mt6323: Add support for MT6323 regulator regulator: Add document for MT6323 regulator regulator: da9210: addition of device tree support regulator: act8865: Fix missing of_node_put() in act8865_pdata_from_dt() regulator: qcom_smd: Avoid overlapping linear voltage ranges regulator: s2mps11: Fix the voltage linear range for s2mps15 regulator: pwm: Fix regulator ramp delay for continuous mode regulator: da9211: add descriptions for da9212/da9214 mfd: rn5t618: Register restart handler mfd: rn5t618: Register power off callback optionally regulator: rn5t618: Add RN5T567 PMIC support mfd: rn5t618: Add Ricoh RN5T567 PMIC support ARM: dts: meson: minix-neo-x8: define PMIC as power controller regulator: tps65218: force set power-up/down strobe to 3 for dcdc3 regulator: tps65218: Enable suspend configuration regulator: tps65217: Enable suspend configuration regulator: qcom_spmi: Add support for get_mode/set_mode on switches ...
author: Linus Torvalds 2016-07-26 19:40:43 -0700
committer: Linus Torvalds 2016-07-26 19:40:43 -0700
commit: 6097d55e10a7e190279e99318a0e075c8d1dce9e (patch)
tree: 39c49a19bf0b1b5f9a8ce1f06412517ecc2dd133
parent: ae9799975ccf5f1b2c30227d6d02aa4129750a64 (diff)
parent: a485f5fc8c8e631c32c65e5ee2bb5719400435d6 (diff)
43 files changed, 1357 insertions, 215 deletions
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index d20b1034e967..585a95546288 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -22,6 +22,11 @@ Optional properties:
 		      AXP152/20X: range:  750-1875, Default: 1.5 MHz
 		      AXP22X/80X: range: 1800-4050, Default: 3   MHz
 
+- x-powers,drive-vbus-en: axp221 / axp223 only boolean, set this when the
+		  N_VBUSEN pin is used as an output pin to control an external
+		  regulator to drive the OTG VBus, rather then as an input pin
+		  which signals whether the board is driving OTG VBus or not.
+
 - <input>-supply: a phandle to the regulator supply node. May be omitted if
 		  inputs are unregulated, such as using the IPSOUT output
 		  from the PMIC.
@@ -79,6 +84,7 @@ ELDO3		: LDO		: eldoin-supply		: shared supply
 LDO_IO0		: LDO		: ips-supply		: GPIO 0
 LDO_IO1		: LDO		: ips-supply		: GPIO 1
 RTC_LDO		: LDO		: ips-supply		: always on
+DRIVEVBUS	: Enable output	: drivevbus-supply	: external regulator
 
 AXP809 regulators, type, and corresponding input supply names:
 
diff --git a/Documentation/devicetree/bindings/mfd/rn5t618.txt b/Documentation/devicetree/bindings/mfd/rn5t618.txt
index 937785a3eddc..9e6770b105c9 100644
--- a/Documentation/devicetree/bindings/mfd/rn5t618.txt
+++ b/Documentation/devicetree/bindings/mfd/rn5t618.txt
@@ -1,18 +1,21 @@
-* Ricoh RN5T618 PMIC
+* Ricoh RN5T567/RN5T618 PMIC
 
-Ricoh RN5T618 is a power management IC which integrates 3 step-down
-DCDC converters, 7 low-dropout regulators, a Li-ion battery charger,
-fuel gauge, ADC, GPIOs and a watchdog timer. It can be controlled
-through a I2C interface.
+Ricoh RN5T567/RN5T618 is a power management IC family which integrates
+3 to 4 step-down DCDC converters, 7 low-dropout regulators, GPIOs and
+a watchdog timer. The RN5T618 provides additionally a Li-ion battery
+charger, fuel gauge and an ADC. It can be controlled through an I2C
+interface.
 
 Required properties:
- - compatible: should be "ricoh,rn5t618"
+ - compatible: must be one of
+		"ricoh,rn5t567"
+		"ricoh,rn5t618"
  - reg: the I2C slave address of the device
 
 Sub-nodes:
  - regulators: the node is required if the regulator functionality is
-   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, LDO1,
-   LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
+   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
+   (RN5T567), LDO1, LDO2, LDO3, LDO4, LDO5, LDORTC1 and LDORTC2.
    The common bindings for each individual regulator can be found in:
    Documentation/devicetree/bindings/regulator/regulator.txt
 
diff --git a/Documentation/devicetree/bindings/regulator/da9210.txt b/Documentation/devicetree/bindings/regulator/da9210.txt
index 7aa9b1fa6b21..58065ca9e3b4 100644
--- a/Documentation/devicetree/bindings/regulator/da9210.txt
+++ b/Documentation/devicetree/bindings/regulator/da9210.txt
@@ -1,4 +1,4 @@
-* Dialog Semiconductor DA9210 Voltage Regulator
+* Dialog Semiconductor DA9210 Multi-phase 12A DCDC BUCK Converter
 
 Required properties:
 
@@ -18,8 +18,12 @@ Example:
 		compatible = "dlg,da9210";
 		reg = <0x68>;
 
-		regulator-min-microvolt = <900000>;
-		regulator-max-microvolt = <1000000>;
+		interrupt-parent = <...>;
+		interrupts = <...>;
+
+		regulator-min-microvolt = <300000>;
+		regulator-max-microvolt = <1570000>;
+		regulator-min-microamp = <1600000>;
+		regulator-max-microamp = <4600000>;
 		regulator-boot-on;
-		regulator-always-on;
 	};
diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt
index c620493e8dbe..0f2a6f8fcafd 100644
--- a/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -1,7 +1,8 @@
-* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator
 
 Required properties:
-- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
+- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213"
+  or "dlg,da9214" or "dlg,da9215"
 - reg: I2C slave address, usually 0x68.
 - interrupts: the interrupt outputs of the controller
 - regulators: A node that houses a sub-node for each regulator within the
@@ -30,6 +31,25 @@ Example 1) DA9211
 				regulator-max-microamp 	= <5000000>;
 				enable-gpios = <&gpio 27 0>;
 			};
+		};
+	};
+
+Example 2) DA9212
+
+	pmic: da9212@68 {
+		compatible = "dlg,da9212";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <2000000>;
+				regulator-max-microamp 	= <5000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
 			BUCKB {
 				regulator-name = "VBUCKB";
 				regulator-min-microvolt = < 300000>;
@@ -41,7 +61,7 @@ Example 1) DA9211
 		};
 	};
 
-Example 2) DA9213
+Example 3) DA9213
 	pmic: da9213@68 {
 		compatible = "dlg,da9213";
 		reg = <0x68>;
@@ -56,6 +76,24 @@ Example 2) DA9213
 				regulator-max-microamp 	= <6000000>;
 				enable-gpios = <&gpio 27 0>;
 			};
+		};
+	};
+
+Example 4) DA9214
+	pmic: da9214@68 {
+		compatible = "dlg,da9214";
+		reg = <0x68>;
+		interrupts = <3 27>;
+
+		regulators {
+			BUCKA {
+				regulator-name = "VBUCKA";
+				regulator-min-microvolt = < 300000>;
+				regulator-max-microvolt = <1570000>;
+				regulator-min-microamp 	= <3000000>;
+				regulator-max-microamp 	= <6000000>;
+				enable-gpios = <&gpio 27 0>;
+			};
 			BUCKB {
 				regulator-name = "VBUCKB";
 				regulator-min-microvolt = < 300000>;
@@ -67,8 +105,7 @@ Example 2) DA9213
 		};
 	};
 
-
-Example 3) DA9215
+Example 5) DA9215
 	pmic: da9215@68 {
 		compatible = "dlg,da9215";
 		reg = <0x68>;
diff --git a/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
new file mode 100644
index 000000000000..c35d878b0960
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6323-regulator.txt
@@ -0,0 +1,237 @@
+Mediatek MT6323 Regulator Driver
+
+All voltage regulators are defined as subnodes of the regulators node. A list
+of regulators provided by this controller are defined as subnodes of the
+PMIC's node. Each regulator is named according to its regulator type,
+buck_<name> and ldo_<name>. The definition for each of these nodes is defined
+using the standard binding for regulators at
+Documentation/devicetree/bindings/regulator/regulator.txt.
+
+The valid names for regulators are::
+BUCK:
+  buck_vproc, buck_vsys, buck_vpa
+LDO:
+  ldo_vtcxo, ldo_vcn28, ldo_vcn33_bt, ldo_vcn33_wifi, ldo_va, ldo_vcama,
+  ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, ldo_vemc3v3, ldo_vgp1, ldo_vgp2,
+  ldo_vgp3, ldo_vcn18, ldo_vsim1, ldo_vsim2, ldo_vrtc, ldo_vcamaf, ldo_vibr,
+  ldo_vrf18, ldo_vm, ldo_vio18, ldo_vcamd, ldo_vcamio
+
+Example:
+
+	pmic: mt6323 {
+		mt6323regulator: regulators {
+			mt6323_vproc_reg: buck_vproc{
+				regulator-name = "vproc";
+				regulator-min-microvolt = < 700000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <12500>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vsys_reg: buck_vsys{
+				regulator-name = "vsys";
+				regulator-min-microvolt = <1400000>;
+				regulator-max-microvolt = <2987500>;
+				regulator-ramp-delay = <25000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vpa_reg: buck_vpa{
+				regulator-name = "vpa";
+				regulator-min-microvolt = < 500000>;
+				regulator-max-microvolt = <3650000>;
+			};
+
+			mt6323_vtcxo_reg: ldo_vtcxo{
+				regulator-name = "vtcxo";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <90>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcn28_reg: ldo_vcn28{
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_bt_reg: ldo_vcn33_bt{
+				regulator-name = "vcn33_bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_vcn33_wifi_reg: ldo_vcn33_wifi{
+				regulator-name = "vcn33_wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3600000>;
+				regulator-enable-ramp-delay = <185>;
+			};
+
+			mt6323_va_reg: ldo_va{
+				regulator-name = "va";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcama_reg: ldo_vcama{
+				regulator-name = "vcama";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vio28_reg: ldo_vio28{
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vusb_reg: ldo_vusb{
+				regulator-name = "vusb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmc_reg: ldo_vmc{
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vmch_reg: ldo_vmch{
+				regulator-name = "vmch";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vemc3v3_reg: ldo_vemc3v3{
+				regulator-name = "vemc3v3";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+				regulator-boot-on;
+			};
+
+			mt6323_vgp1_reg: ldo_vgp1{
+				regulator-name = "vgp1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp2_reg: ldo_vgp2{
+				regulator-name = "vgp2";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vgp3_reg: ldo_vgp3{
+				regulator-name = "vgp3";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcn18_reg: ldo_vcn18{
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim1_reg: ldo_vsim1{
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vsim2_reg: ldo_vsim2{
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vrtc_reg: ldo_vrtc{
+				regulator-name = "vrtc";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamaf_reg: ldo_vcamaf{
+				regulator-name = "vcamaf";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vibr_reg: ldo_vibr{
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <36>;
+			};
+
+			mt6323_vrf18_reg: ldo_vrf18{
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1825000>;
+				regulator-max-microvolt = <1825000>;
+				regulator-enable-ramp-delay = <187>;
+			};
+
+			mt6323_vm_reg: ldo_vm{
+				regulator-name = "vm";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vio18_reg: ldo_vio18{
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			mt6323_vcamd_reg: ldo_vcamd{
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+
+			mt6323_vcamio_reg: ldo_vcamio{
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <216>;
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
index ed936f0f34f2..dd6f59cf1455 100644
--- a/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/pwm-regulator.txt
@@ -38,13 +38,18 @@ NB: To be clear, if voltage-table is provided, then the device will be used
 in Voltage Table Mode.  If no voltage-table is provided, then the device will
 be used in Continuous Voltage Mode.
 
+Optional properties:
+--------------------
+- enable-gpios:		GPIO to use to enable/disable the regulator
+
 Any property defined as part of the core regulator binding can also be used.
 (See: ../regulator/regulator.txt)
 
-Continuous Voltage Example:
+Continuous Voltage With Enable GPIO Example:
 	pwm_regulator {
 		compatible = "pwm-regulator;
 		pwms = <&pwm1 0 8448 0>;
+		enable-gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
 		regulator-min-microvolt = <1016000>;
 		regulator-max-microvolt = <1114000>;
 		regulator-name = "vdd_logic";
diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
index 46c6f3ed1a1c..0fa3b0fac129 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt
@@ -113,9 +113,9 @@ pm8916:
 	l14, l15, l16, l17, l18
 
 pm8941:
-	s1, s2, s3, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14,
-	l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
-	mvs1, mvs2
+	s1, s2, s3, s4, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13,
+	l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, lvs1, lvs2, lvs3,
+	5vs1, 5vs2
 
 pm8994:
 	s1, s2, s3, s4, s5, s6, s7, s8, s9, s10, s11, s12, l1, l2, l3, l4, l5,
diff --git a/arch/arm/boot/dts/meson8-minix-neo-x8.dts b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
index 4f536bb1f002..8bceb8d343f6 100644
--- a/arch/arm/boot/dts/meson8-minix-neo-x8.dts
+++ b/arch/arm/boot/dts/meson8-minix-neo-x8.dts
@@ -80,6 +80,7 @@
 	pmic@32 {
 		compatible = "ricoh,rn5t618";
 		reg = <0x32>;
+		system-power-controller;
 
 		regulators {
 		};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 1bcf601de5bc..ff031a7735a5 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -852,13 +852,14 @@ config MFD_RK808
 	  including interrupts, RTC, LDO & DCDC regulators, and onkey.
 
 config MFD_RN5T618
-	tristate "Ricoh RN5T5618 PMIC"
+	tristate "Ricoh RN5T567/618 PMIC"
 	depends on I2C
+	depends on OF
 	select MFD_CORE
 	select REGMAP_I2C
 	help
-	  Say yes here to add support for the Ricoh RN5T618 PMIC. This
-	  driver provides common support for accessing the device,
+	  Say yes here to add support for the Ricoh RN5T567 or R5T618 PMIC.
+	  This driver provides common support for accessing the device,
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
diff --git a/drivers/mfd/rn5t618.c b/drivers/mfd/rn5t618.c
index 0ad51d792feb..ee94080e1cbb 100644
--- a/drivers/mfd/rn5t618.c
+++ b/drivers/mfd/rn5t618.c
@@ -2,6 +2,7 @@
  * MFD core driver for Ricoh RN5T618 PMIC
  *
  * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ * Copyright (C) 2016 Toradex AG
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -11,10 +12,13 @@
  * along with this program. If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/rn5t618.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/reboot.h>
 #include <linux/regmap.h>
 
 static const struct mfd_cell rn5t618_cells[] = {
@@ -48,28 +52,64 @@ static const struct regmap_config rn5t618_regmap_config = {
 };
 
 static struct rn5t618 *rn5t618_pm_power_off;
+static struct notifier_block rn5t618_restart_handler;
 
-static void rn5t618_power_off(void)
+static void rn5t618_trigger_poweroff_sequence(bool repower)
 {
 	/* disable automatic repower-on */
 	regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_REPCNT,
-			   RN5T618_REPCNT_REPWRON, 0);
+			   RN5T618_REPCNT_REPWRON,
+			   repower ? RN5T618_REPCNT_REPWRON : 0);
 	/* start power-off sequence */
 	regmap_update_bits(rn5t618_pm_power_off->regmap, RN5T618_SLPCNT,
 			   RN5T618_SLPCNT_SWPWROFF, RN5T618_SLPCNT_SWPWROFF);
 }
 
+static void rn5t618_power_off(void)
+{
+	rn5t618_trigger_poweroff_sequence(false);
+}
+
+static int rn5t618_restart(struct notifier_block *this,
+			    unsigned long mode, void *cmd)
+{
+	rn5t618_trigger_poweroff_sequence(true);
+
+	/*
+	 * Re-power factor detection on PMIC side is not instant. 1ms
+	 * proved to be enough time until reset takes effect.
+	 */
+	mdelay(1);
+
+	return NOTIFY_DONE;
+}
+
+static const struct of_device_id rn5t618_of_match[] = {
+	{ .compatible = "ricoh,rn5t567", .data = (void *)RN5T567 },
+	{ .compatible = "ricoh,rn5t618", .data = (void *)RN5T618 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rn5t618_of_match);
+
 static int rn5t618_i2c_probe(struct i2c_client *i2c,
 			     const struct i2c_device_id *id)
 {
+	const struct of_device_id *of_id;
 	struct rn5t618 *priv;
 	int ret;
 
+	of_id = of_match_device(rn5t618_of_match, &i2c->dev);
+	if (!of_id) {
+		dev_err(&i2c->dev, "Failed to find matching DT ID\n");
+		return -EINVAL;
+	}
+
 	priv = devm_kzalloc(&i2c->dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
 	i2c_set_clientdata(i2c, priv);
+	priv->variant = (long)of_id->data;
 
 	priv->regmap = devm_regmap_init_i2c(i2c, &rn5t618_regmap_config);
 	if (IS_ERR(priv->regmap)) {
@@ -85,9 +125,21 @@ static int rn5t618_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
-	if (!pm_power_off) {
-		rn5t618_pm_power_off = priv;
-		pm_power_off = rn5t618_power_off;
+	rn5t618_pm_power_off = priv;
+	if (of_device_is_system_power_controller(i2c->dev.of_node)) {
+		if (!pm_power_off)
+			pm_power_off = rn5t618_power_off;
+		else
+			dev_warn(&i2c->dev, "Poweroff callback already assigned\n");
+	}
+
+	rn5t618_restart_handler.notifier_call = rn5t618_restart;
+	rn5t618_restart_handler.priority = 192;
+
+	ret = register_restart_handler(&rn5t618_restart_handler);
+	if (ret) {
+		dev_err(&i2c->dev, "cannot register restart handler, %d\n", ret);
+		return ret;
 	}
 
 	return 0;
@@ -105,12 +157,6 @@ static int rn5t618_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
-static const struct of_device_id rn5t618_of_match[] = {
-	{ .compatible = "ricoh,rn5t618" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, rn5t618_of_match);
-
 static const struct i2c_device_id rn5t618_i2c_id[] = {
 	{ }
 };
@@ -129,5 +175,5 @@ static struct i2c_driver rn5t618_i2c_driver = {
 module_i2c_driver(rn5t618_i2c_driver);
 
 MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
-MODULE_DESCRIPTION("Ricoh RN5T618 MFD driver");
+MODULE_DESCRIPTION("Ricoh RN5T567/618 MFD driver");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 144cbf5b3e5a..6c88e31c01f7 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -498,6 +498,15 @@ config REGULATOR_MT6311
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6323
+	tristate "MediaTek MT6323 PMIC"
+	depends on MFD_MT6397
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6323 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6397
 	tristate "MediaTek MT6397 PMIC"
 	depends on MFD_MT6397
@@ -543,12 +552,12 @@ config REGULATOR_PCF50633
 	 on PCF50633
 
 config REGULATOR_PFUZE100
-	tristate "Freescale PFUZE100/PFUZE200 regulator driver"
+	tristate "Freescale PFUZE100/200/3000 regulator driver"
 	depends on I2C
 	select REGMAP_I2C
 	help
 	  Say y here to support the regulators found on the Freescale
-	  PFUZE100/PFUZE200 PMIC.
+	  PFUZE100/200/3000 PMIC.
 
 config REGULATOR_PV88060
 	tristate "Powerventure Semiconductor PV88060 regulator"
@@ -636,10 +645,11 @@ config REGULATOR_RK808
 	  outputs which can be controlled by i2c communication.
 
 config REGULATOR_RN5T618
-	tristate "Ricoh RN5T618 voltage regulators"
+	tristate "Ricoh RN5T567/618 voltage regulators"
 	depends on MFD_RN5T618
 	help
-	  Say y here to support the regulators found on Ricoh RN5T618 PMIC.
+	  Say y here to support the regulators found on Ricoh RN5T567 or
+	  RN5T618 PMIC.
 
 config REGULATOR_RT5033
 	tristate "Richtek RT5033 Regulators"
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 85a1d44a3939..f3da9eea9ab6 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -65,6 +65,7 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
+obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o
diff --git a/drivers/regulator/act8865-regulator.c b/drivers/regulator/act8865-regulator.c
index a1cd0d4f8257..7652477e6a9d 100644
--- a/drivers/regulator/act8865-regulator.c
+++ b/drivers/regulator/act8865-regulator.c
@@ -395,12 +395,6 @@ static int act8865_pdata_from_dt(struct device *dev,
 	struct act8865_regulator_data *regulator;
 	struct of_regulator_match *matches;
 
-	np = of_get_child_by_name(dev->of_node, "regulators");
-	if (!np) {
-		dev_err(dev, "missing 'regulators' subnode in DT\n");
-		return -EINVAL;
-	}
-
 	switch (type) {
 	case ACT8600:
 		matches = act8600_matches;
@@ -419,6 +413,12 @@ static int act8865_pdata_from_dt(struct device *dev,
 		return -EINVAL;
 	}
 
+	np = of_get_child_by_name(dev->of_node, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return -EINVAL;
+	}
+
 	matched = of_regulator_match(dev, np, matches, num_matches);
 	of_node_put(np);
 	if (matched <= 0)
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 514a5e8fdbab..6d9ac76a772f 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -36,6 +36,8 @@
 
 #define AXP20X_FREQ_DCDC_MASK		0x0f
 
+#define AXP22X_MISC_N_VBUSEN_FUNC	BIT(4)
+
 #define AXP_DESC_IO(_family, _id, _match, _supply, _min, _max, _step, _vreg,	\
 		    _vmask, _ereg, _emask, _enable_val, _disable_val)		\
 	[_family##_##_id] = {							\
@@ -230,6 +232,73 @@ static const struct regulator_desc axp22x_regulators[] = {
 	AXP_DESC_FIXED(AXP22X, RTC_LDO, "rtc_ldo", "ips", 3000),
 };
 
+static const struct regulator_desc axp22x_drivevbus_regulator = {
+	.name		= "drivevbus",
+	.supply_name	= "drivevbus",
+	.of_match	= of_match_ptr("drivevbus"),
+	.regulators_node = of_match_ptr("regulators"),
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.enable_reg	= AXP20X_VBUS_IPSOUT_MGMT,
+	.enable_mask	= BIT(2),
+	.ops		= &axp20x_ops_sw,
+};
+
+static const struct regulator_linear_range axp809_dcdc4_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x0, 0x2f, 20000),
+	REGULATOR_LINEAR_RANGE(1800000, 0x30, 0x38, 100000),
+};
+
+static const struct regulator_linear_range axp809_dldo1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0x0, 0x1a, 100000),
+	REGULATOR_LINEAR_RANGE(3400000, 0x1b, 0x1f, 200000),
+};
+
+static const struct regulator_desc axp809_regulators[] = {
+	AXP_DESC(AXP809, DCDC1, "dcdc1", "vin1", 1600, 3400, 100,
+		 AXP22X_DCDC1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(1)),
+	AXP_DESC(AXP809, DCDC2, "dcdc2", "vin2", 600, 1540, 20,
+		 AXP22X_DCDC2_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(2)),
+	AXP_DESC(AXP809, DCDC3, "dcdc3", "vin3", 600, 1860, 20,
+		 AXP22X_DCDC3_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1, BIT(3)),
+	AXP_DESC_RANGES(AXP809, DCDC4, "dcdc4", "vin4", axp809_dcdc4_ranges,
+			57, AXP22X_DCDC4_V_OUT, 0x3f, AXP22X_PWR_OUT_CTRL1,
+			BIT(4)),
+	AXP_DESC(AXP809, DCDC5, "dcdc5", "vin5", 1000, 2550, 50,
+		 AXP22X_DCDC5_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(5)),
+	/* secondary switchable output of DCDC1 */
+	AXP_DESC_SW(AXP809, DC1SW, "dc1sw", NULL, AXP22X_PWR_OUT_CTRL2,
+		    BIT(7)),
+	/* LDO regulator internally chained to DCDC5 */
+	AXP_DESC(AXP809, DC5LDO, "dc5ldo", NULL, 700, 1400, 100,
+		 AXP22X_DC5LDO_V_OUT, 0x7, AXP22X_PWR_OUT_CTRL1, BIT(0)),
+	AXP_DESC(AXP809, ALDO1, "aldo1", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(6)),
+	AXP_DESC(AXP809, ALDO2, "aldo2", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL1, BIT(7)),
+	AXP_DESC(AXP809, ALDO3, "aldo3", "aldoin", 700, 3300, 100,
+		 AXP22X_ALDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(5)),
+	AXP_DESC_RANGES(AXP809, DLDO1, "dldo1", "dldoin", axp809_dldo1_ranges,
+			32, AXP22X_DLDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2,
+			BIT(3)),
+	AXP_DESC(AXP809, DLDO2, "dldo2", "dldoin", 700, 3300, 100,
+		 AXP22X_DLDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(4)),
+	AXP_DESC(AXP809, ELDO1, "eldo1", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO1_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(0)),
+	AXP_DESC(AXP809, ELDO2, "eldo2", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO2_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(1)),
+	AXP_DESC(AXP809, ELDO3, "eldo3", "eldoin", 700, 3300, 100,
+		 AXP22X_ELDO3_V_OUT, 0x1f, AXP22X_PWR_OUT_CTRL2, BIT(2)),
+	AXP_DESC_IO(AXP809, LDO_IO0, "ldo_io0", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO0_V_OUT, 0x1f, AXP20X_GPIO0_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_IO(AXP809, LDO_IO1, "ldo_io1", "ips", 700, 3300, 100,
+		    AXP22X_LDO_IO1_V_OUT, 0x1f, AXP20X_GPIO1_CTRL, 0x07,
+		    AXP22X_IO_ENABLED, AXP22X_IO_DISABLED),
+	AXP_DESC_FIXED(AXP809, RTC_LDO, "rtc_ldo", "ips", 1800),
+	AXP_DESC_SW(AXP809, SW, "sw", "swin", AXP22X_PWR_OUT_CTRL2, BIT(6)),
+};
+
 static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 {
 	struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
@@ -245,6 +314,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		break;
 	case AXP221_ID:
 	case AXP223_ID:
+	case AXP809_ID:
 		min = 1800;
 		max = 4050;
 		def = 3000;
@@ -324,6 +394,7 @@ static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 work
 
 	case AXP221_ID:
 	case AXP223_ID:
+	case AXP809_ID:
 		if (id < AXP22X_DCDC1 || id > AXP22X_DCDC5)
 			return -EINVAL;
 
@@ -352,8 +423,9 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	};
 	int ret, i, nregulators;
 	u32 workmode;
-	const char *axp22x_dc1_name = axp22x_regulators[AXP22X_DCDC1].name;
-	const char *axp22x_dc5_name = axp22x_regulators[AXP22X_DCDC5].name;
+	const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
+	const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
+	bool drivevbus = false;
 
 	switch (axp20x->variant) {
 	case AXP202_ID:
@@ -365,6 +437,12 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 	case AXP223_ID:
 		regulators = axp22x_regulators;
 		nregulators = AXP22X_REG_ID_MAX;
+		drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
+						  "x-powers,drive-vbus-en");
+		break;
+	case AXP809_ID:
+		regulators = axp809_regulators;
+		nregulators = AXP809_REG_ID_MAX;
 		break;
 	default:
 		dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
@@ -388,22 +466,22 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		 * part of this loop to see where we save the DT defined
 		 * name.
 		 */
-		if (regulators == axp22x_regulators) {
-			if (i == AXP22X_DC1SW) {
-				new_desc = devm_kzalloc(&pdev->dev,
-							sizeof(*desc),
-							GFP_KERNEL);
-				*new_desc = regulators[i];
-				new_desc->supply_name = axp22x_dc1_name;
-				desc = new_desc;
-			} else if (i == AXP22X_DC5LDO) {
-				new_desc = devm_kzalloc(&pdev->dev,
-							sizeof(*desc),
-							GFP_KERNEL);
-				*new_desc = regulators[i];
-				new_desc->supply_name = axp22x_dc5_name;
-				desc = new_desc;
-			}
+		if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
+		    (regulators == axp809_regulators && i == AXP809_DC1SW)) {
+			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
+						GFP_KERNEL);
+			*new_desc = regulators[i];
+			new_desc->supply_name = dcdc1_name;
+			desc = new_desc;
+		}
+
+		if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
+		    (regulators == axp809_regulators && i == AXP809_DC5LDO)) {
+			new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
+						GFP_KERNEL);
+			*new_desc = regulators[i];
+			new_desc->supply_name = dcdc5_name;
+			desc = new_desc;
 		}
 
 		rdev = devm_regulator_register(&pdev->dev, desc, &config);
@@ -426,16 +504,29 @@ static int axp20x_regulator_probe(struct platform_device *pdev)
 		/*
 		 * Save AXP22X DCDC1 / DCDC5 regulator names for later.
 		 */
-		if (regulators == axp22x_regulators) {
-			/* Can we use rdev->constraints->name instead? */
-			if (i == AXP22X_DCDC1)
-				of_property_read_string(rdev->dev.of_node,
-							"regulator-name",
-							&axp22x_dc1_name);
-			else if (i == AXP22X_DCDC5)
-				of_property_read_string(rdev->dev.of_node,
-							"regulator-name",
-							&axp22x_dc5_name);
+		if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
+		    (regulators == axp809_regulators && i == AXP809_DCDC1))
+			of_property_read_string(rdev->dev.of_node,
+						"regulator-name",
+						&dcdc1_name);
+
+		if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
+		    (regulators == axp809_regulators && i == AXP809_DCDC5))
+			of_property_read_string(rdev->dev.of_node,
+						"regulator-name",
+						&dcdc5_name);
+	}
+
+	if (drivevbus) {
+		/* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
+		regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
+				   AXP22X_MISC_N_VBUSEN_FUNC, 0);
+		rdev = devm_regulator_register(&pdev->dev,
+					       &axp22x_drivevbus_regulator,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "Failed to register drivevbus\n");
+			return PTR_ERR(rdev);
 		}
 	}
 
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ec8184d53f13..db320e8fa865 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2509,33 +2509,6 @@ int regulator_is_enabled(struct regulator *regulator)
 EXPORT_SYMBOL_GPL(regulator_is_enabled);
 
 /**
- * regulator_can_change_voltage - check if regulator can change voltage
- * @regulator: regulator source
- *
- * Returns positive if the regulator driver backing the source/client
- * can change its voltage, false otherwise. Useful for detecting fixed
- * or dummy regulators and disabling voltage change logic in the client
- * driver.
- */
-int regulator_can_change_voltage(struct regulator *regulator)
-{
-	struct regulator_dev	*rdev = regulator->rdev;
-
-	if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) {
-		if (rdev->desc->n_voltages - rdev->desc->linear_min_sel > 1)
-			return 1;
-
-		if (rdev->desc->continuous_voltage_range &&
-		    rdev->constraints->min_uV && rdev->constraints->max_uV &&
-		    rdev->constraints->min_uV != rdev->constraints->max_uV)
-			return 1;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(regulator_can_change_voltage);
-
-/**
  * regulator_count_voltages - count regulator_list_voltage() selectors
  * @regulator: regulator source
  *
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 1050cb77561a..9ececfef42d6 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -333,7 +333,7 @@ static const struct regulator_ops da9052_ldo_ops = {
 static struct da9052_regulator_info da9052_regulator_info[] = {
 	DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
 	DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
-	DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
+	DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
 	DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0),
 	DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
 	DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
@@ -350,8 +350,8 @@ static struct da9052_regulator_info da9052_regulator_info[] = {
 static struct da9052_regulator_info da9053_regulator_info[] = {
 	DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO),
 	DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO),
-	DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO),
-	DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0),
+	DA9052_DCDC(BUCK3, 25, 950, 2525, 6, 6, DA9052_SUPPLY_VBMEMGO),
+	DA9052_DCDC(BUCK4, 25, 950, 2525, 6, 6, 0),
 	DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0),
 	DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO),
 	DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO),
diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index 01c0e3709b66..d0496d6b0934 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -21,12 +21,11 @@
 #include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
-#include <linux/slab.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
+#include <linux/of_device.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
 
@@ -179,6 +178,13 @@ error_i2c:
 /*
  * I2C driver interface functions
  */
+
+static const struct of_device_id da9210_dt_ids[] = {
+	{ .compatible = "dlg,da9210", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, da9210_dt_ids);
+
 static int da9210_i2c_probe(struct i2c_client *i2c,
 			    const struct i2c_device_id *id)
 {
@@ -188,6 +194,16 @@ static int da9210_i2c_probe(struct i2c_client *i2c,
 	struct regulator_dev *rdev = NULL;
 	struct regulator_config config = { };
 	int error;
+	const struct of_device_id *match;
+
+	if (i2c->dev.of_node && !pdata) {
+		match = of_match_device(of_match_ptr(da9210_dt_ids),
+						&i2c->dev);
+		if (!match) {
+			dev_err(&i2c->dev, "Error: No device match found\n");
+			return -ENODEV;
+		}
+	}
 
 	chip = devm_kzalloc(&i2c->dev, sizeof(struct da9210), GFP_KERNEL);
 	if (!chip)
@@ -264,6 +280,7 @@ MODULE_DEVICE_TABLE(i2c, da9210_i2c_id);
 static struct i2c_driver da9210_regulator_driver = {
 	.driver = {
 		.name = "da9210",
+		.of_match_table = of_match_ptr(da9210_dt_ids),
 	},
 	.probe = da9210_i2c_probe,
 	.id_table = da9210_i2c_id,
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index 236abf473db5..aa47280efd32 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -1,5 +1,6 @@
 /*
- * da9211-regulator.c - Regulator device driver for DA9211/DA9213/DA9215
+ * da9211-regulator.c - Regulator device driver for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This library is free software; you can redistribute it and/or
@@ -493,7 +494,9 @@ static int da9211_i2c_probe(struct i2c_client *i2c,
 
 static const struct i2c_device_id da9211_i2c_id[] = {
 	{"da9211", DA9211},
+	{"da9212", DA9212},
 	{"da9213", DA9213},
+	{"da9214", DA9214},
 	{"da9215", DA9215},
 	{},
 };
@@ -502,8 +505,10 @@ MODULE_DEVICE_TABLE(i2c, da9211_i2c_id);
 #ifdef CONFIG_OF
 static const struct of_device_id da9211_dt_ids[] = {
 	{ .compatible = "dlg,da9211", .data = &da9211_i2c_id[0] },
-	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[1] },
-	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[2] },
+	{ .compatible = "dlg,da9212", .data = &da9211_i2c_id[1] },
+	{ .compatible = "dlg,da9213", .data = &da9211_i2c_id[2] },
+	{ .compatible = "dlg,da9214", .data = &da9211_i2c_id[3] },
+	{ .compatible = "dlg,da9215", .data = &da9211_i2c_id[4] },
 	{},
 };
 MODULE_DEVICE_TABLE(of, da9211_dt_ids);
@@ -521,5 +526,5 @@ static struct i2c_driver da9211_regulator_driver = {
 module_i2c_driver(da9211_regulator_driver);
 
 MODULE_AUTHOR("James Ban <James.Ban.opensource@diasemi.com>");
-MODULE_DESCRIPTION("Regulator device driver for Dialog DA9211/DA9213/DA9215");
+MODULE_DESCRIPTION("DA9211/DA9212/DA9213/DA9214/DA9215 regulator driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/da9211-regulator.h b/drivers/regulator/da9211-regulator.h
index d6ad96fc64d3..b841bbf330cc 100644
--- a/drivers/regulator/da9211-regulator.h
+++ b/drivers/regulator/da9211-regulator.h
@@ -1,5 +1,6 @@
 /*
- * da9211-regulator.h - Regulator definitions for DA9211/DA9213/DA9215
+ * da9211-regulator.h - Regulator definitions for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index ff62d69ba0be..988a7472c2ab 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -79,18 +79,8 @@ of_get_fixed_voltage_config(struct device *dev,
 		config->enabled_at_boot = true;
 
 	config->gpio = of_get_named_gpio(np, "gpio", 0);
-	/*
-	 * of_get_named_gpio() currently returns ENODEV rather than
-	 * EPROBE_DEFER. This code attempts to be compatible with both
-	 * for now; the ENODEV check can be removed once the API is fixed.
-	 * of_get_named_gpio() doesn't differentiate between a missing
-	 * property (which would be fine here, since the GPIO is optional)
-	 * and some other error. Patches have been posted for both issues.
-	 * Once they are check in, we should replace this with:
-	 * if (config->gpio < 0 && config->gpio != -ENOENT)
-	 */
-	if ((config->gpio == -ENODEV) || (config->gpio == -EPROBE_DEFER))
-		return ERR_PTR(-EPROBE_DEFER);
+	if ((config->gpio < 0) && (config->gpio != -ENOENT))
+		return ERR_PTR(config->gpio);
 
 	of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
 
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
index b4ffd113ba21..e504b9148226 100644
--- a/drivers/regulator/lp873x-regulator.c
+++ b/drivers/regulator/lp873x-regulator.c
@@ -20,7 +20,7 @@
 #include <linux/mfd/lp873x.h>
 
 #define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
-			 _delay, _lr, _nlr, _cr)			\
+			 _delay, _lr, _cr)				\
 	[_id] = {							\
 		.desc = {						\
 			.name			= _name,		\
@@ -37,7 +37,7 @@
 			.enable_mask		= _em,			\
 			.ramp_delay		= _delay,		\
 			.linear_ranges		= _lr,			\
-			.n_linear_ranges	= _nlr,			\
+			.n_linear_ranges	= ARRAY_SIZE(_lr),	\
 		},							\
 		.ctrl2_reg = _cr,					\
 	}
@@ -175,22 +175,20 @@ static const struct lp873x_regulator regulators[] = {
 			 256, LP873X_REG_BUCK0_VOUT,
 			 LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
 			 LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
-			 buck0_buck1_ranges, 4, LP873X_REG_BUCK0_CTRL_2),
+			 buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),
 	LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
 			 256, LP873X_REG_BUCK1_VOUT,
 			 LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
 			 LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
-			 buck0_buck1_ranges, 4, LP873X_REG_BUCK1_CTRL_2),
+			 buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),
 	LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
 			 LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
 			 LP873X_REG_LDO0_CTRL,
-			 LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 1,
-			 0xFF),
+			 LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF),
 	LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
 			 LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
 			 LP873X_REG_LDO1_CTRL,
-			 LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 1,
-			 0xFF),
+			 LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF),
 };
 
 static int lp873x_regulator_probe(struct platform_device *pdev)
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 08d2f13eca00..3958f50c5975 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -271,22 +271,18 @@ static int max8973_set_ramp_delay(struct regulator_dev *rdev,
 	struct max8973_chip *max = rdev_get_drvdata(rdev);
 	unsigned int control;
 	int ret;
-	int ret_val;
 
 	/* Set ramp delay */
-	if (ramp_delay < 25000) {
+	if (ramp_delay <= 12000)
 		control = MAX8973_RAMP_12mV_PER_US;
-		ret_val = 12000;
-	} else if (ramp_delay < 50000) {
+	else if (ramp_delay <= 25000)
 		control = MAX8973_RAMP_25mV_PER_US;
-		ret_val = 25000;
-	} else if (ramp_delay < 200000) {
+	else if (ramp_delay <= 50000)
 		control = MAX8973_RAMP_50mV_PER_US;
-		ret_val = 50000;
-	} else {
+	else if (ramp_delay <= 200000)
 		control = MAX8973_RAMP_200mV_PER_US;
-		ret_val = 200000;
-	}
+	else
+		return -EINVAL;
 
 	ret = regmap_update_bits(max->regmap, MAX8973_CONTROL1,
 			MAX8973_RAMP_MASK, control);
diff --git a/drivers/regulator/mt6323-regulator.c b/drivers/regulator/mt6323-regulator.c
new file mode 100644
index 000000000000..b7b9670f0979
--- /dev/null
+++ b/drivers/regulator/mt6323-regulator.c
@@ -0,0 +1,425 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/mfd/mt6323/registers.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6323-regulator.h>
+#include <linux/regulator/of_regulator.h>
+
+#define MT6323_LDO_MODE_NORMAL	0
+#define MT6323_LDO_MODE_LP	1
+
+/*
+ * MT6323 regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @qi: Mask for query enable signal status of regulators
+ * @vselon_reg: Register sections for hardware control mode of bucks
+ * @vselctrl_reg: Register for controlling the buck control mode.
+ * @vselctrl_mask: Mask for query buck's voltage control mode.
+ */
+struct mt6323_regulator_info {
+	struct regulator_desc desc;
+	u32 qi;
+	u32 vselon_reg;
+	u32 vselctrl_reg;
+	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+};
+
+#define MT6323_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
+		vosel, vosel_mask, voselon, vosel_ctrl)			\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_range_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = (max - min)/step + 1,			\
+		.linear_ranges = volt_ranges,				\
+		.n_linear_ranges = ARRAY_SIZE(volt_ranges),		\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(0),					\
+	},								\
+	.qi = BIT(13),							\
+	.vselon_reg = voselon,						\
+	.vselctrl_reg = vosel_ctrl,					\
+	.vselctrl_mask = BIT(1),					\
+}
+
+#define MT6323_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
+		vosel_mask, _modeset_reg, _modeset_mask)		\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_table_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = ARRAY_SIZE(ldo_volt_table),		\
+		.volt_table = ldo_volt_table,				\
+		.vsel_reg = vosel,					\
+		.vsel_mask = vosel_mask,				\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+#define MT6323_REG_FIXED(match, vreg, enreg, enbit, volt,		\
+		_modeset_reg, _modeset_mask)				\
+[MT6323_ID_##vreg] = {							\
+	.desc = {							\
+		.name = #vreg,						\
+		.of_match = of_match_ptr(match),			\
+		.ops = &mt6323_volt_fixed_ops,				\
+		.type = REGULATOR_VOLTAGE,				\
+		.id = MT6323_ID_##vreg,					\
+		.owner = THIS_MODULE,					\
+		.n_voltages = 1,					\
+		.enable_reg = enreg,					\
+		.enable_mask = BIT(enbit),				\
+		.min_uV = volt,						\
+	},								\
+	.qi = BIT(15),							\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = _modeset_mask,					\
+}
+
+static const struct regulator_linear_range buck_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250),
+};
+
+static const struct regulator_linear_range buck_volt_range2[] = {
+	REGULATOR_LINEAR_RANGE(1400000, 0, 0x7f, 12500),
+};
+
+static const struct regulator_linear_range buck_volt_range3[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0, 0x3f, 50000),
+};
+
+static const u32 ldo_volt_table1[] = {
+	3300000, 3400000, 3500000, 3600000,
+};
+
+static const u32 ldo_volt_table2[] = {
+	1500000, 1800000, 2500000, 2800000,
+};
+
+static const u32 ldo_volt_table3[] = {
+	1800000, 3300000,
+};
+
+static const u32 ldo_volt_table4[] = {
+	3000000, 3300000,
+};
+
+static const u32 ldo_volt_table5[] = {
+	1200000, 1300000, 1500000, 1800000, 2000000, 2800000, 3000000, 3300000,
+};
+
+static const u32 ldo_volt_table6[] = {
+	1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000,
+};
+
+static const u32 ldo_volt_table7[] = {
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table8[] = {
+	1800000, 3000000,
+};
+
+static const u32 ldo_volt_table9[] = {
+	1200000, 1350000, 1500000, 1800000,
+};
+
+static const u32 ldo_volt_table10[] = {
+	1200000, 1300000, 1500000, 1800000,
+};
+
+static int mt6323_get_status(struct regulator_dev *rdev)
+{
+	int ret;
+	u32 regval;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	ret = regmap_read(rdev->regmap, info->desc.enable_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static int mt6323_ldo_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	int ret, val = 0;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support set_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	switch (mode) {
+	case REGULATOR_MODE_STANDBY:
+		val = MT6323_LDO_MODE_LP;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6323_LDO_MODE_NORMAL;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	val <<= ffs(info->modeset_mask) - 1;
+
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				  info->modeset_mask, val);
+
+	return ret;
+}
+
+static unsigned int mt6323_ldo_get_mode(struct regulator_dev *rdev)
+{
+	unsigned int val;
+	unsigned int mode;
+	int ret;
+	struct mt6323_regulator_info *info = rdev_get_drvdata(rdev);
+
+	if (!info->modeset_mask) {
+		dev_err(&rdev->dev, "regulator %s doesn't support get_mode\n",
+			info->desc.name);
+		return -EINVAL;
+	}
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &val);
+	if (ret < 0)
+		return ret;
+
+	val &= info->modeset_mask;
+	val >>= ffs(info->modeset_mask) - 1;
+
+	if (val & 0x1)
+		mode = REGULATOR_MODE_STANDBY;
+	else
+		mode = REGULATOR_MODE_NORMAL;
+
+	return mode;
+}
+
+static const struct regulator_ops mt6323_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+};
+
+static const struct regulator_ops mt6323_volt_table_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_iterate,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+	.set_mode = mt6323_ldo_set_mode,
+	.get_mode = mt6323_ldo_get_mode,
+};
+
+static const struct regulator_ops mt6323_volt_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6323_get_status,
+	.set_mode = mt6323_ldo_set_mode,
+	.get_mode = mt6323_ldo_get_mode,
+};
+
+/* The array is indexed by id(MT6323_ID_XXX) */
+static struct mt6323_regulator_info mt6323_regulators[] = {
+	MT6323_BUCK("buck_vproc", VPROC, 700000, 1493750, 6250,
+		buck_volt_range1, MT6323_VPROC_CON7, MT6323_VPROC_CON9, 0x7f,
+		MT6323_VPROC_CON10, MT6323_VPROC_CON5),
+	MT6323_BUCK("buck_vsys", VSYS, 1400000, 2987500, 12500,
+		buck_volt_range2, MT6323_VSYS_CON7, MT6323_VSYS_CON9, 0x7f,
+		MT6323_VSYS_CON10, MT6323_VSYS_CON5),
+	MT6323_BUCK("buck_vpa", VPA, 500000, 3650000, 50000,
+		buck_volt_range3, MT6323_VPA_CON7, MT6323_VPA_CON9,
+		0x3f, MT6323_VPA_CON10, MT6323_VPA_CON5),
+	MT6323_REG_FIXED("ldo_vtcxo", VTCXO, MT6323_ANALDO_CON1, 10, 2800000,
+		MT6323_ANALDO_CON1, 0x2),
+	MT6323_REG_FIXED("ldo_vcn28", VCN28, MT6323_ANALDO_CON19, 12, 2800000,
+		MT6323_ANALDO_CON20, 0x2),
+	MT6323_LDO("ldo_vcn33_bt", VCN33_BT, ldo_volt_table1,
+		MT6323_ANALDO_CON16, 7, MT6323_ANALDO_CON16, 0xC,
+		MT6323_ANALDO_CON21, 0x2),
+	MT6323_LDO("ldo_vcn33_wifi", VCN33_WIFI, ldo_volt_table1,
+		MT6323_ANALDO_CON17, 12, MT6323_ANALDO_CON16, 0xC,
+		MT6323_ANALDO_CON21, 0x2),
+	MT6323_REG_FIXED("ldo_va", VA, MT6323_ANALDO_CON2, 14, 2800000,
+		MT6323_ANALDO_CON2, 0x2),
+	MT6323_LDO("ldo_vcama", VCAMA, ldo_volt_table2,
+		MT6323_ANALDO_CON4, 15, MT6323_ANALDO_CON10, 0x60, -1, 0),
+	MT6323_REG_FIXED("ldo_vio28", VIO28, MT6323_DIGLDO_CON0, 14, 2800000,
+		MT6323_DIGLDO_CON0, 0x2),
+	MT6323_REG_FIXED("ldo_vusb", VUSB, MT6323_DIGLDO_CON2, 14, 3300000,
+		MT6323_DIGLDO_CON2, 0x2),
+	MT6323_LDO("ldo_vmc", VMC, ldo_volt_table3,
+		MT6323_DIGLDO_CON3, 12, MT6323_DIGLDO_CON24, 0x10,
+		MT6323_DIGLDO_CON3, 0x2),
+	MT6323_LDO("ldo_vmch", VMCH, ldo_volt_table4,
+		MT6323_DIGLDO_CON5, 14, MT6323_DIGLDO_CON26, 0x80,
+		MT6323_DIGLDO_CON5, 0x2),
+	MT6323_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table4,
+		MT6323_DIGLDO_CON6, 14, MT6323_DIGLDO_CON27, 0x80,
+		MT6323_DIGLDO_CON6, 0x2),
+	MT6323_LDO("ldo_vgp1", VGP1, ldo_volt_table5,
+		MT6323_DIGLDO_CON7, 15, MT6323_DIGLDO_CON28, 0xE0,
+		MT6323_DIGLDO_CON7, 0x2),
+	MT6323_LDO("ldo_vgp2", VGP2, ldo_volt_table6,
+		MT6323_DIGLDO_CON8, 15, MT6323_DIGLDO_CON29, 0xE0,
+		MT6323_DIGLDO_CON8, 0x2),
+	MT6323_LDO("ldo_vgp3", VGP3, ldo_volt_table7,
+		MT6323_DIGLDO_CON9, 15, MT6323_DIGLDO_CON30, 0x60,
+		MT6323_DIGLDO_CON9, 0x2),
+	MT6323_REG_FIXED("ldo_vcn18", VCN18, MT6323_DIGLDO_CON11, 14, 1800000,
+		MT6323_DIGLDO_CON11, 0x2),
+	MT6323_LDO("ldo_vsim1", VSIM1, ldo_volt_table8,
+		MT6323_DIGLDO_CON13, 15, MT6323_DIGLDO_CON34, 0x20,
+		MT6323_DIGLDO_CON13, 0x2),
+	MT6323_LDO("ldo_vsim2", VSIM2, ldo_volt_table8,
+		MT6323_DIGLDO_CON14, 15, MT6323_DIGLDO_CON35, 0x20,
+		MT6323_DIGLDO_CON14, 0x2),
+	MT6323_REG_FIXED("ldo_vrtc", VRTC, MT6323_DIGLDO_CON15, 8, 2800000,
+		-1, 0),
+	MT6323_LDO("ldo_vcamaf", VCAMAF, ldo_volt_table5,
+		MT6323_DIGLDO_CON31, 15, MT6323_DIGLDO_CON32, 0xE0,
+		MT6323_DIGLDO_CON31, 0x2),
+	MT6323_LDO("ldo_vibr", VIBR, ldo_volt_table5,
+		MT6323_DIGLDO_CON39, 15, MT6323_DIGLDO_CON40, 0xE0,
+		MT6323_DIGLDO_CON39, 0x2),
+	MT6323_REG_FIXED("ldo_vrf18", VRF18, MT6323_DIGLDO_CON45, 15, 1825000,
+		MT6323_DIGLDO_CON45, 0x2),
+	MT6323_LDO("ldo_vm", VM, ldo_volt_table9,
+		MT6323_DIGLDO_CON47, 14, MT6323_DIGLDO_CON48, 0x30,
+		MT6323_DIGLDO_CON47, 0x2),
+	MT6323_REG_FIXED("ldo_vio18", VIO18, MT6323_DIGLDO_CON49, 14, 1800000,
+		MT6323_DIGLDO_CON49, 0x2),
+	MT6323_LDO("ldo_vcamd", VCAMD, ldo_volt_table10,
+		MT6323_DIGLDO_CON51, 14, MT6323_DIGLDO_CON52, 0x60,
+		MT6323_DIGLDO_CON51, 0x2),
+	MT6323_REG_FIXED("ldo_vcamio", VCAMIO, MT6323_DIGLDO_CON53, 14, 1800000,
+		MT6323_DIGLDO_CON53, 0x2),
+};
+
+static int mt6323_set_buck_vosel_reg(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+	int i;
+	u32 regval;
+
+	for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+		if (mt6323_regulators[i].vselctrl_reg) {
+			if (regmap_read(mt6323->regmap,
+				mt6323_regulators[i].vselctrl_reg,
+				&regval) < 0) {
+				dev_err(&pdev->dev,
+					"Failed to read buck ctrl\n");
+				return -EIO;
+			}
+
+			if (regval & mt6323_regulators[i].vselctrl_mask) {
+				mt6323_regulators[i].desc.vsel_reg =
+				mt6323_regulators[i].vselon_reg;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mt6323_regulator_probe(struct platform_device *pdev)
+{
+	struct mt6397_chip *mt6323 = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+	u32 reg_value;
+
+	/* Query buck controller to select activated voltage register part */
+	if (mt6323_set_buck_vosel_reg(pdev))
+		return -EIO;
+
+	/* Read PMIC chip revision to update constraints and voltage table */
+	if (regmap_read(mt6323->regmap, MT6323_CID, &reg_value) < 0) {
+		dev_err(&pdev->dev, "Failed to read Chip ID\n");
+		return -EIO;
+	}
+	dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value);
+
+	for (i = 0; i < MT6323_MAX_REGULATOR; i++) {
+		config.dev = &pdev->dev;
+		config.driver_data = &mt6323_regulators[i];
+		config.regmap = mt6323->regmap;
+		rdev = devm_regulator_register(&pdev->dev,
+				&mt6323_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "failed to register %s\n",
+				mt6323_regulators[i].desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+	return 0;
+}
+
+static const struct platform_device_id mt6323_platform_ids[] = {
+	{"mt6323-regulator", 0},
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, mt6323_platform_ids);
+
+static struct platform_driver mt6323_regulator_driver = {
+	.driver = {
+		.name = "mt6323-regulator",
+	},
+	.probe = mt6323_regulator_probe,
+	.id_table = mt6323_platform_ids,
+};
+
+module_platform_driver(mt6323_regulator_driver);
+
+MODULE_AUTHOR("Chen Zhong <chen.zhong@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6323 PMIC");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c
index 17a5b6c2d6a9..c6c6aa85e4e8 100644
--- a/drivers/regulator/mt6397-regulator.c
+++ b/drivers/regulator/mt6397-regulator.c
@@ -23,6 +23,9 @@
 #include <linux/regulator/mt6397-regulator.h>
 #include <linux/regulator/of_regulator.h>
 
+#define MT6397_BUCK_MODE_AUTO	0
+#define MT6397_BUCK_MODE_FORCE_PWM	1
+
 /*
  * MT6397 regulators' information
  *
@@ -38,10 +41,14 @@ struct mt6397_regulator_info {
 	u32 vselon_reg;
 	u32 vselctrl_reg;
 	u32 vselctrl_mask;
+	u32 modeset_reg;
+	u32 modeset_mask;
+	u32 modeset_shift;
 };
 
 #define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg,	\
-		vosel, vosel_mask, voselon, vosel_ctrl)			\
+		vosel, vosel_mask, voselon, vosel_ctrl, _modeset_reg,	\
+		_modeset_shift)					\
 [MT6397_ID_##vreg] = {							\
 	.desc = {							\
 		.name = #vreg,						\
@@ -62,6 +69,9 @@ struct mt6397_regulator_info {
 	.vselon_reg = voselon,						\
 	.vselctrl_reg = vosel_ctrl,					\
 	.vselctrl_mask = BIT(1),					\
+	.modeset_reg = _modeset_reg,					\
+	.modeset_mask = BIT(_modeset_shift),				\
+	.modeset_shift = _modeset_shift					\
 }
 
 #define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel,	\
@@ -145,6 +155,63 @@ static const u32 ldo_volt_table7[] = {
 	1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000,
 };
 
+static int mt6397_regulator_set_mode(struct regulator_dev *rdev,
+				     unsigned int mode)
+{
+	struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret, val;
+
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		val = MT6397_BUCK_MODE_FORCE_PWM;
+		break;
+	case REGULATOR_MODE_NORMAL:
+		val = MT6397_BUCK_MODE_AUTO;
+		break;
+	default:
+		ret = -EINVAL;
+		goto err_mode;
+	}
+
+	dev_dbg(&rdev->dev, "mt6397 buck set_mode %#x, %#x, %#x, %#x\n",
+		info->modeset_reg, info->modeset_mask,
+		info->modeset_shift, val);
+
+	val <<= info->modeset_shift;
+	ret = regmap_update_bits(rdev->regmap, info->modeset_reg,
+				 info->modeset_mask, val);
+err_mode:
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to set mt6397 buck mode: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static unsigned int mt6397_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct mt6397_regulator_info *info = rdev_get_drvdata(rdev);
+	int ret, regval;
+
+	ret = regmap_read(rdev->regmap, info->modeset_reg, &regval);
+	if (ret != 0) {
+		dev_err(&rdev->dev,
+			"Failed to get mt6397 buck mode: %d\n", ret);
+		return ret;
+	}
+
+	switch ((regval & info->modeset_mask) >> info->modeset_shift) {
+	case MT6397_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	case MT6397_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	default:
+		return -EINVAL;
+	}
+}
+
 static int mt6397_get_status(struct regulator_dev *rdev)
 {
 	int ret;
@@ -160,7 +227,7 @@ static int mt6397_get_status(struct regulator_dev *rdev)
 	return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
 }
 
-static struct regulator_ops mt6397_volt_range_ops = {
+static const struct regulator_ops mt6397_volt_range_ops = {
 	.list_voltage = regulator_list_voltage_linear_range,
 	.map_voltage = regulator_map_voltage_linear_range,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -170,9 +237,11 @@ static struct regulator_ops mt6397_volt_range_ops = {
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.get_status = mt6397_get_status,
+	.set_mode = mt6397_regulator_set_mode,
+	.get_mode = mt6397_regulator_get_mode,
 };
 
-static struct regulator_ops mt6397_volt_table_ops = {
+static const struct regulator_ops mt6397_volt_table_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.map_voltage = regulator_map_voltage_iterate,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -184,7 +253,7 @@ static struct regulator_ops mt6397_volt_table_ops = {
 	.get_status = mt6397_get_status,
 };
 
-static struct regulator_ops mt6397_volt_fixed_ops = {
+static const struct regulator_ops mt6397_volt_fixed_ops = {
 	.list_voltage = regulator_list_voltage_linear,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -196,28 +265,30 @@ static struct regulator_ops mt6397_volt_fixed_ops = {
 static struct mt6397_regulator_info mt6397_regulators[] = {
 	MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f,
-		MT6397_VCA15_CON10, MT6397_VCA15_CON5),
+		MT6397_VCA15_CON10, MT6397_VCA15_CON5, MT6397_VCA15_CON2, 11),
 	MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f,
-		MT6397_VPCA7_CON10, MT6397_VPCA7_CON5),
+		MT6397_VPCA7_CON10, MT6397_VPCA7_CON5, MT6397_VPCA7_CON2, 8),
 	MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9,
-		0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5),
+		0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5,
+		MT6397_VSRMCA15_CON2, 8),
 	MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9,
-		0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5),
+		0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5,
+		MT6397_VSRMCA7_CON2, 8),
 	MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250,
 		buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f,
-		MT6397_VCORE_CON10, MT6397_VCORE_CON5),
+		MT6397_VCORE_CON10, MT6397_VCORE_CON5, MT6397_VCORE_CON2, 8),
 	MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1,
 		MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f,
-		MT6397_VGPU_CON10, MT6397_VGPU_CON5),
+		MT6397_VGPU_CON10, MT6397_VGPU_CON5, MT6397_VGPU_CON2, 8),
 	MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2,
 		MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f,
-		MT6397_VDRM_CON10, MT6397_VDRM_CON5),
+		MT6397_VDRM_CON10, MT6397_VDRM_CON5, MT6397_VDRM_CON2, 8),
 	MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000,
 		buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f,
-		MT6397_VIO18_CON10, MT6397_VIO18_CON5),
+		MT6397_VIO18_CON10, MT6397_VIO18_CON5, MT6397_VIO18_CON2, 8),
 	MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000),
 	MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000),
 	MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1,
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index cd828dbf9d52..4f613ec99500 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -163,6 +163,9 @@ static void of_get_regulation_constraints(struct device_node *np,
 					"regulator-suspend-microvolt", &pval))
 			suspend_state->uV = pval;
 
+		if (i == PM_SUSPEND_MEM)
+			constraints->initial_state = PM_SUSPEND_MEM;
+
 		of_node_put(suspend_np);
 		suspend_state = NULL;
 		suspend_np = NULL;
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 2a44e5dd9c2a..cb18b5c4f2db 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -70,6 +70,7 @@ struct pfuze_chip {
 	struct device *dev;
 	struct pfuze_regulator regulator_descs[PFUZE100_MAX_REGULATOR];
 	struct regulator_dev *regulators[PFUZE100_MAX_REGULATOR];
+	struct pfuze_regulator *pfuze_regulators;
 };
 
 static const int pfuze100_swbst[] = {
@@ -334,8 +335,6 @@ static struct pfuze_regulator pfuze3000_regulators[] = {
 	PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000),
 };
 
-static struct pfuze_regulator *pfuze_regulators;
-
 #ifdef CONFIG_OF
 /* PFUZE100 */
 static struct of_regulator_match pfuze100_matches[] = {
@@ -563,21 +562,21 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 	/* use the right regulators after identify the right device */
 	switch (pfuze_chip->chip_id) {
 	case PFUZE3000:
-		pfuze_regulators = pfuze3000_regulators;
+		pfuze_chip->pfuze_regulators = pfuze3000_regulators;
 		regulator_num = ARRAY_SIZE(pfuze3000_regulators);
 		sw_check_start = PFUZE3000_SW2;
 		sw_check_end = PFUZE3000_SW2;
 		sw_hi = 1 << 3;
 		break;
 	case PFUZE200:
-		pfuze_regulators = pfuze200_regulators;
+		pfuze_chip->pfuze_regulators = pfuze200_regulators;
 		regulator_num = ARRAY_SIZE(pfuze200_regulators);
 		sw_check_start = PFUZE200_SW2;
 		sw_check_end = PFUZE200_SW3B;
 		break;
 	case PFUZE100:
 	default:
-		pfuze_regulators = pfuze100_regulators;
+		pfuze_chip->pfuze_regulators = pfuze100_regulators;
 		regulator_num = ARRAY_SIZE(pfuze100_regulators);
 		sw_check_start = PFUZE100_SW2;
 		sw_check_end = PFUZE100_SW4;
@@ -587,7 +586,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		(pfuze_chip->chip_id == PFUZE100) ? "100" :
 		((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000"));
 
-	memcpy(pfuze_chip->regulator_descs, pfuze_regulators,
+	memcpy(pfuze_chip->regulator_descs, pfuze_chip->pfuze_regulators,
 		sizeof(pfuze_chip->regulator_descs));
 
 	ret = pfuze_parse_regulators_dt(pfuze_chip);
@@ -631,7 +630,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 			devm_regulator_register(&client->dev, desc, &config);
 		if (IS_ERR(pfuze_chip->regulators[i])) {
 			dev_err(&client->dev, "register regulator%s failed\n",
-				pfuze_regulators[i].desc.name);
+				pfuze_chip->pfuze_regulators[i].desc.name);
 			return PTR_ERR(pfuze_chip->regulators[i]);
 		}
 	}
@@ -650,5 +649,5 @@ static struct i2c_driver pfuze_driver = {
 module_i2c_driver(pfuze_driver);
 
 MODULE_AUTHOR("Robin Gong <b38343@freescale.com>");
-MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/PFUZE200 PMIC");
+MODULE_DESCRIPTION("Regulator Driver for Freescale PFUZE100/200/3000 PMIC");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c
index c448b727f5f8..6c4afc73ecac 100644
--- a/drivers/regulator/pv88060-regulator.c
+++ b/drivers/regulator/pv88060-regulator.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -25,8 +24,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
 #include "pv88060-regulator.h"
 
 #define PV88060_MAX_REGULATORS	14
diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
index d7107566c429..81950bdb1cc4 100644
--- a/drivers/regulator/pv88080-regulator.c
+++ b/drivers/regulator/pv88080-regulator.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -25,8 +24,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
 #include "pv88080-regulator.h"
 
 #define PV88080_MAX_REGULATORS	3
diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c
index 0057c6740d6f..421641175352 100644
--- a/drivers/regulator/pv88090-regulator.c
+++ b/drivers/regulator/pv88090-regulator.c
@@ -14,7 +14,6 @@
  */
 
 #include <linux/err.h>
-#include <linux/gpio.h>
 #include <linux/i2c.h>
 #include <linux/module.h>
 #include <linux/init.h>
@@ -25,8 +24,6 @@
 #include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/regulator/of_regulator.h>
-#include <linux/proc_fs.h>
-#include <linux/uaccess.h>
 #include "pv88090-regulator.h"
 
 #define PV88090_MAX_REGULATORS	5
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index fafa3488e960..666bc3bb52ef 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -20,6 +20,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pwm.h>
+#include <linux/gpio/consumer.h>
 
 struct pwm_regulator_data {
 	/*  Shared */
@@ -38,6 +39,9 @@ struct pwm_regulator_data {
 
 	/* Continuous voltage */
 	int volt_uV;
+
+	/* Enable GPIO */
+	struct gpio_desc *enb_gpio;
 };
 
 struct pwm_voltages {
@@ -94,6 +98,9 @@ static int pwm_regulator_enable(struct regulator_dev *dev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
 
+	if (drvdata->enb_gpio)
+		gpiod_set_value_cansleep(drvdata->enb_gpio, 1);
+
 	return pwm_enable(drvdata->pwm);
 }
 
@@ -103,6 +110,9 @@ static int pwm_regulator_disable(struct regulator_dev *dev)
 
 	pwm_disable(drvdata->pwm);
 
+	if (drvdata->enb_gpio)
+		gpiod_set_value_cansleep(drvdata->enb_gpio, 0);
+
 	return 0;
 }
 
@@ -110,6 +120,9 @@ static int pwm_regulator_is_enabled(struct regulator_dev *dev)
 {
 	struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
 
+	if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio))
+		return false;
+
 	return pwm_is_enabled(drvdata->pwm);
 }
 
@@ -132,6 +145,7 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 	unsigned int duty_pulse;
 	u64 req_period;
 	u32 rem;
+	int old_uV = pwm_regulator_get_voltage(rdev);
 	int ret;
 
 	pwm_get_args(drvdata->pwm, &pargs);
@@ -159,15 +173,14 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
 		return ret;
 	}
 
-	ret = pwm_enable(drvdata->pwm);
-	if (ret) {
-		dev_err(&rdev->dev, "Failed to enable PWM: %d\n", ret);
-		return ret;
-	}
 	drvdata->volt_uV = min_uV;
 
-	/* Delay required by PWM regulator to settle to the new voltage */
-	usleep_range(ramp_delay, ramp_delay + 1000);
+	if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev))
+		return 0;
+
+	/* Ramp delay is in uV/uS. Adjust to uS and delay */
+	ramp_delay = DIV_ROUND_UP(abs(min_uV - old_uV), ramp_delay);
+	usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
 
 	return 0;
 }
@@ -253,6 +266,7 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 	struct regulator_dev *regulator;
 	struct regulator_config config = { };
 	struct device_node *np = pdev->dev.of_node;
+	enum gpiod_flags gpio_flags;
 	int ret;
 
 	if (!np) {
@@ -290,6 +304,18 @@ static int pwm_regulator_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	if (init_data->constraints.boot_on || init_data->constraints.always_on)
+		gpio_flags = GPIOD_OUT_HIGH;
+	else
+		gpio_flags = GPIOD_OUT_LOW;
+	drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
+						    gpio_flags);
+	if (IS_ERR(drvdata->enb_gpio)) {
+		ret = PTR_ERR(drvdata->enb_gpio);
+		dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret);
+		return ret;
+	}
+
 	/*
 	 * FIXME: pwm_apply_args() should be removed when switching to the
 	 * atomic PWM API.
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index 6c7fe4778793..5022fa8d10c6 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -211,7 +211,7 @@ static const struct regulator_desc pma8084_switch = {
 static const struct regulator_desc pm8x41_hfsmps = {
 	.linear_ranges = (struct regulator_linear_range[]) {
 		REGULATOR_LINEAR_RANGE( 375000,  0,  95, 12500),
-		REGULATOR_LINEAR_RANGE(1550000, 96, 158, 25000),
+		REGULATOR_LINEAR_RANGE(1575000, 96, 158, 25000),
 	},
 	.n_linear_ranges = 2,
 	.n_voltages = 159,
diff --git a/drivers/regulator/qcom_spmi-regulator.c b/drivers/regulator/qcom_spmi-regulator.c
index 84cce21e98cd..16c5f84e06a7 100644
--- a/drivers/regulator/qcom_spmi-regulator.c
+++ b/drivers/regulator/qcom_spmi-regulator.c
@@ -1085,6 +1085,8 @@ static struct regulator_ops spmi_vs_ops = {
 	.set_pull_down		= spmi_regulator_common_set_pull_down,
 	.set_soft_start		= spmi_regulator_common_set_soft_start,
 	.set_over_current_protection = spmi_regulator_vs_ocp,
+	.set_mode		= spmi_regulator_common_set_mode,
+	.get_mode		= spmi_regulator_common_get_mode,
 };
 
 static struct regulator_ops spmi_boost_ops = {
@@ -1496,6 +1498,7 @@ static const struct spmi_regulator_data pm8941_regulators[] = {
 	{ "s1", 0x1400, "vdd_s1", },
 	{ "s2", 0x1700, "vdd_s2", },
 	{ "s3", 0x1a00, "vdd_s3", },
+	{ "s4", 0xa000, },
 	{ "l1", 0x4000, "vdd_l1_l3", },
 	{ "l2", 0x4100, "vdd_l2_lvs_1_2_3", },
 	{ "l3", 0x4200, "vdd_l1_l3", },
@@ -1523,8 +1526,8 @@ static const struct spmi_regulator_data pm8941_regulators[] = {
 	{ "lvs1", 0x8000, "vdd_l2_lvs_1_2_3", },
 	{ "lvs2", 0x8100, "vdd_l2_lvs_1_2_3", },
 	{ "lvs3", 0x8200, "vdd_l2_lvs_1_2_3", },
-	{ "mvs1", 0x8300, "vin_5vs", },
-	{ "mvs2", 0x8400, "vin_5vs", },
+	{ "5vs1", 0x8300, "vin_5vs", "ocp-5vs1", },
+	{ "5vs2", 0x8400, "vin_5vs", "ocp-5vs2", },
 	{ }
 };
 
diff --git a/drivers/regulator/rn5t618-regulator.c b/drivers/regulator/rn5t618-regulator.c
index b85ceb8ff911..9c930eb68cda 100644
--- a/drivers/regulator/rn5t618-regulator.c
+++ b/drivers/regulator/rn5t618-regulator.c
@@ -46,6 +46,23 @@ static struct regulator_ops rn5t618_reg_ops = {
 		.vsel_mask	= (vmask),				\
 	}
 
+static struct regulator_desc rn5t567_regulators[] = {
+	/* DCDC */
+	REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
+	REG(DCDC2, DC2CTL, BIT(0), DC2DAC, 0xff, 600000, 3500000, 12500),
+	REG(DCDC3, DC3CTL, BIT(0), DC3DAC, 0xff, 600000, 3500000, 12500),
+	REG(DCDC4, DC4CTL, BIT(0), DC4DAC, 0xff, 600000, 3500000, 12500),
+	/* LDO */
+	REG(LDO1, LDOEN1, BIT(0), LDO1DAC, 0x7f, 900000, 3500000, 25000),
+	REG(LDO2, LDOEN1, BIT(1), LDO2DAC, 0x7f, 900000, 3500000, 25000),
+	REG(LDO3, LDOEN1, BIT(2), LDO3DAC, 0x7f, 600000, 3500000, 25000),
+	REG(LDO4, LDOEN1, BIT(3), LDO4DAC, 0x7f, 900000, 3500000, 25000),
+	REG(LDO5, LDOEN1, BIT(4), LDO5DAC, 0x7f, 900000, 3500000, 25000),
+	/* LDO RTC */
+	REG(LDORTC1, LDOEN2, BIT(4), LDORTCDAC, 0x7f, 1200000, 3500000, 25000),
+	REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
+};
+
 static struct regulator_desc rn5t618_regulators[] = {
 	/* DCDC */
 	REG(DCDC1, DC1CTL, BIT(0), DC1DAC, 0xff, 600000, 3500000, 12500),
@@ -67,18 +84,33 @@ static int rn5t618_regulator_probe(struct platform_device *pdev)
 	struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
+	struct regulator_desc *regulators;
 	int i;
 
+	switch (rn5t618->variant) {
+	case RN5T567:
+		regulators = rn5t567_regulators;
+		break;
+	case RN5T618:
+		regulators = rn5t618_regulators;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	config.dev = pdev->dev.parent;
+	config.regmap = rn5t618->regmap;
+
 	for (i = 0; i < RN5T618_REG_NUM; i++) {
-		config.dev = pdev->dev.parent;
-		config.regmap = rn5t618->regmap;
+		if (!regulators[i].name)
+			continue;
 
 		rdev = devm_regulator_register(&pdev->dev,
-					       &rn5t618_regulators[i],
+					       &regulators[i],
 					       &config);
 		if (IS_ERR(rdev)) {
 			dev_err(&pdev->dev, "failed to register %s regulator\n",
-				rn5t618_regulators[i].name);
+				regulators[i].name);
 			return PTR_ERR(rdev);
 		}
 	}
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 02fb6b4ea820..d838e77dd947 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -750,7 +750,7 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges3[] = {
 
 /* voltage range for s2mps15 LDO 7, 8, 9 and 10 */
 static const struct regulator_linear_range s2mps15_ldo_voltage_ranges4[] = {
-	REGULATOR_LINEAR_RANGE(700000, 0xc, 0x18, 25000),
+	REGULATOR_LINEAR_RANGE(700000, 0x10, 0x20, 25000),
 };
 
 /* voltage range for s2mps15 LDO 1 */
@@ -760,12 +760,12 @@ static const struct regulator_linear_range s2mps15_ldo_voltage_ranges5[] = {
 
 /* voltage range for s2mps15 BUCK 1, 2, 3, 4, 5, 6 and 7 */
 static const struct regulator_linear_range s2mps15_buck_voltage_ranges1[] = {
-	REGULATOR_LINEAR_RANGE(500000, 0x20, 0xb0, 6250),
+	REGULATOR_LINEAR_RANGE(500000, 0x20, 0xc0, 6250),
 };
 
 /* voltage range for s2mps15 BUCK 8, 9 and 10 */
 static const struct regulator_linear_range s2mps15_buck_voltage_ranges2[] = {
-	REGULATOR_LINEAR_RANGE(1000000, 0x20, 0xc0, 12500),
+	REGULATOR_LINEAR_RANGE(1000000, 0x20, 0x78, 12500),
 };
 
 static const struct regulator_desc s2mps15_regulators[] = {
diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c
index adbe4fc5cf07..2d12b9af3540 100644
--- a/drivers/regulator/tps65217-regulator.c
+++ b/drivers/regulator/tps65217-regulator.c
@@ -28,7 +28,7 @@
 #include <linux/mfd/tps65217.h>
 
 #define TPS65217_REGULATOR(_name, _id, _of_match, _ops, _n, _vr, _vm, _em, \
-                           _t, _lr, _nlr) \
+			   _t, _lr, _nlr,  _sr, _sm)	\
 	{						\
 		.name		= _name,		\
 		.id		= _id,			\
@@ -45,6 +45,8 @@
 		.volt_table	= _t,			\
 		.linear_ranges	= _lr,			\
 		.n_linear_ranges = _nlr,		\
+		.bypass_reg	= _sr,			\
+		.bypass_mask	= _sm,			\
 	}						\
 
 static const unsigned int LDO1_VSEL_table[] = {
@@ -118,6 +120,35 @@ static int tps65217_pmic_set_voltage_sel(struct regulator_dev *dev,
 	return ret;
 }
 
+static int tps65217_pmic_set_suspend_enable(struct regulator_dev *dev)
+{
+	struct tps65217 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
+		return -EINVAL;
+
+	return tps65217_clear_bits(tps, dev->desc->bypass_reg,
+				   dev->desc->bypass_mask,
+				   TPS65217_PROTECT_L1);
+}
+
+static int tps65217_pmic_set_suspend_disable(struct regulator_dev *dev)
+{
+	struct tps65217 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4)
+		return -EINVAL;
+
+	if (!tps->strobes[rid])
+		return -EINVAL;
+
+	return tps65217_set_bits(tps, dev->desc->bypass_reg,
+				 dev->desc->bypass_mask,
+				 tps->strobes[rid], TPS65217_PROTECT_L1);
+}
+
 /* Operations permitted on DCDCx, LDO2, LDO3 and LDO4 */
 static struct regulator_ops tps65217_pmic_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -127,6 +158,8 @@ static struct regulator_ops tps65217_pmic_ops = {
 	.set_voltage_sel	= tps65217_pmic_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_suspend_enable	= tps65217_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65217_pmic_set_suspend_disable,
 };
 
 /* Operations permitted on LDO1 */
@@ -138,41 +171,50 @@ static struct regulator_ops tps65217_pmic_ldo1_ops = {
 	.set_voltage_sel	= tps65217_pmic_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_table,
 	.map_voltage		= regulator_map_voltage_ascend,
+	.set_suspend_enable	= tps65217_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65217_pmic_set_suspend_disable,
 };
 
 static const struct regulator_desc regulators[] = {
 	TPS65217_REGULATOR("DCDC1", TPS65217_DCDC_1, "dcdc1",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC1,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC1_EN,
-			   NULL, tps65217_uv1_ranges, 2),
+			   NULL, tps65217_uv1_ranges, 2, TPS65217_REG_SEQ1,
+			   TPS65217_SEQ1_DC1_SEQ_MASK),
 	TPS65217_REGULATOR("DCDC2", TPS65217_DCDC_2, "dcdc2",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC2,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC2_EN,
 			   NULL, tps65217_uv1_ranges,
-			   ARRAY_SIZE(tps65217_uv1_ranges)),
+			   ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ1,
+			   TPS65217_SEQ1_DC2_SEQ_MASK),
 	TPS65217_REGULATOR("DCDC3", TPS65217_DCDC_3, "dcdc3",
 			   tps65217_pmic_ops, 64, TPS65217_REG_DEFDCDC3,
 			   TPS65217_DEFDCDCX_DCDC_MASK, TPS65217_ENABLE_DC3_EN,
-			   NULL, tps65217_uv1_ranges, 1),
+			   NULL, tps65217_uv1_ranges, 1, TPS65217_REG_SEQ2,
+			   TPS65217_SEQ2_DC3_SEQ_MASK),
 	TPS65217_REGULATOR("LDO1", TPS65217_LDO_1, "ldo1",
 			   tps65217_pmic_ldo1_ops, 16, TPS65217_REG_DEFLDO1,
 			   TPS65217_DEFLDO1_LDO1_MASK, TPS65217_ENABLE_LDO1_EN,
-			   LDO1_VSEL_table, NULL, 0),
+			   LDO1_VSEL_table, NULL, 0, TPS65217_REG_SEQ2,
+			   TPS65217_SEQ2_LDO1_SEQ_MASK),
 	TPS65217_REGULATOR("LDO2", TPS65217_LDO_2, "ldo2", tps65217_pmic_ops,
 			   64, TPS65217_REG_DEFLDO2,
 			   TPS65217_DEFLDO2_LDO2_MASK, TPS65217_ENABLE_LDO2_EN,
 			   NULL, tps65217_uv1_ranges,
-			   ARRAY_SIZE(tps65217_uv1_ranges)),
+			   ARRAY_SIZE(tps65217_uv1_ranges), TPS65217_REG_SEQ3,
+			   TPS65217_SEQ3_LDO2_SEQ_MASK),
 	TPS65217_REGULATOR("LDO3", TPS65217_LDO_3, "ldo3", tps65217_pmic_ops,
 			   32, TPS65217_REG_DEFLS1, TPS65217_DEFLDO3_LDO3_MASK,
 			   TPS65217_ENABLE_LS1_EN | TPS65217_DEFLDO3_LDO3_EN,
 			   NULL, tps65217_uv2_ranges,
-			   ARRAY_SIZE(tps65217_uv2_ranges)),
+			   ARRAY_SIZE(tps65217_uv2_ranges), TPS65217_REG_SEQ3,
+			   TPS65217_SEQ3_LDO3_SEQ_MASK),
 	TPS65217_REGULATOR("LDO4", TPS65217_LDO_4, "ldo4", tps65217_pmic_ops,
 			   32, TPS65217_REG_DEFLS2, TPS65217_DEFLDO4_LDO4_MASK,
 			   TPS65217_ENABLE_LS2_EN | TPS65217_DEFLDO4_LDO4_EN,
 			   NULL, tps65217_uv2_ranges,
-			   ARRAY_SIZE(tps65217_uv2_ranges)),
+			   ARRAY_SIZE(tps65217_uv2_ranges), TPS65217_REG_SEQ4,
+			   TPS65217_SEQ4_LDO4_SEQ_MASK),
 };
 
 static int tps65217_regulator_probe(struct platform_device *pdev)
@@ -181,13 +223,18 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
 	struct tps65217_board *pdata = dev_get_platdata(tps->dev);
 	struct regulator_dev *rdev;
 	struct regulator_config config = { };
-	int i;
+	int i, ret;
+	unsigned int val;
 
 	if (tps65217_chip_id(tps) != TPS65217) {
 		dev_err(&pdev->dev, "Invalid tps chip version\n");
 		return -ENODEV;
 	}
 
+	/* Allocate memory for strobes */
+	tps->strobes = devm_kzalloc(&pdev->dev, sizeof(u8) *
+				    TPS65217_NUM_REGULATOR, GFP_KERNEL);
+
 	platform_set_drvdata(pdev, tps);
 
 	for (i = 0; i < TPS65217_NUM_REGULATOR; i++) {
@@ -205,6 +252,10 @@ static int tps65217_regulator_probe(struct platform_device *pdev)
 				pdev->name);
 			return PTR_ERR(rdev);
 		}
+
+		/* Store default strobe info */
+		ret = tps65217_reg_read(tps, regulators[i].bypass_reg, &val);
+		tps->strobes[i] = val & regulators[i].bypass_mask;
 	}
 
 	return 0;
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index a5e5634eeb9e..d1e631d64a20 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -31,7 +31,7 @@ enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
 			   DCDC5, DCDC6, LDO1, LS3 };
 
 #define TPS65218_REGULATOR(_name, _id, _type, _ops, _n, _vr, _vm, _er, _em, \
-			    _cr, _cm, _lr, _nlr, _delay, _fuv)		\
+			   _cr, _cm, _lr, _nlr, _delay, _fuv, _sr, _sm)	\
 	{							\
 		.name			= _name,		\
 		.id			= _id,			\
@@ -49,7 +49,9 @@ enum tps65218_regulators { DCDC1, DCDC2, DCDC3, DCDC4,
 		.linear_ranges		= _lr,			\
 		.n_linear_ranges	= _nlr,			\
 		.ramp_delay		= _delay,		\
-		.fixed_uV		= _fuv			\
+		.fixed_uV		= _fuv,			\
+		.bypass_reg	= _sr,				\
+		.bypass_mask	= _sm,				\
 	}							\
 
 #define TPS65218_INFO(_id, _nm, _min, _max)	\
@@ -157,6 +159,40 @@ static int tps65218_pmic_disable(struct regulator_dev *dev)
 				   dev->desc->enable_mask, TPS65218_PROTECT_L1);
 }
 
+static int tps65218_pmic_set_suspend_enable(struct regulator_dev *dev)
+{
+	struct tps65218 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
+		return -EINVAL;
+
+	return tps65218_clear_bits(tps, dev->desc->bypass_reg,
+				   dev->desc->bypass_mask,
+				   TPS65218_PROTECT_L1);
+}
+
+static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
+{
+	struct tps65218 *tps = rdev_get_drvdata(dev);
+	unsigned int rid = rdev_get_id(dev);
+
+	if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
+		return -EINVAL;
+
+	if (!tps->info[rid]->strobe) {
+		if (rid == TPS65218_DCDC_3)
+			tps->info[rid]->strobe = 3;
+		else
+			return -EINVAL;
+	}
+
+	return tps65218_set_bits(tps, dev->desc->bypass_reg,
+				 dev->desc->bypass_mask,
+				 tps->info[rid]->strobe,
+				 TPS65218_PROTECT_L1);
+}
+
 /* Operations permitted on DCDC1, DCDC2 */
 static struct regulator_ops tps65218_dcdc12_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
@@ -167,6 +203,8 @@ static struct regulator_ops tps65218_dcdc12_ops = {
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
 	.set_voltage_time_sel	= regulator_set_voltage_time_sel,
+	.set_suspend_enable	= tps65218_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65218_pmic_set_suspend_disable,
 };
 
 /* Operations permitted on DCDC3, DCDC4 and LDO1 */
@@ -178,6 +216,8 @@ static struct regulator_ops tps65218_ldo1_dcdc34_ops = {
 	.set_voltage_sel	= tps65218_pmic_set_voltage_sel,
 	.list_voltage		= regulator_list_voltage_linear_range,
 	.map_voltage		= regulator_map_voltage_linear_range,
+	.set_suspend_enable	= tps65218_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65218_pmic_set_suspend_disable,
 };
 
 static const int ls3_currents[] = { 100, 200, 500, 1000 };
@@ -247,6 +287,8 @@ static struct regulator_ops tps65218_dcdc56_pmic_ops = {
 	.is_enabled		= regulator_is_enabled_regmap,
 	.enable			= tps65218_pmic_enable,
 	.disable		= tps65218_pmic_disable,
+	.set_suspend_enable	= tps65218_pmic_set_suspend_enable,
+	.set_suspend_disable	= tps65218_pmic_set_suspend_disable,
 };
 
 static const struct regulator_desc regulators[] = {
@@ -254,42 +296,47 @@ static const struct regulator_desc regulators[] = {
 			   tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC1,
 			   TPS65218_CONTROL_DCDC1_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC1_EN, 0, 0, dcdc1_dcdc2_ranges,
-			   2, 4000, 0),
+			   2, 4000, 0, TPS65218_REG_SEQ3,
+			   TPS65218_SEQ3_DC1_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC2", TPS65218_DCDC_2, REGULATOR_VOLTAGE,
 			   tps65218_dcdc12_ops, 64, TPS65218_REG_CONTROL_DCDC2,
 			   TPS65218_CONTROL_DCDC2_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC2_EN, 0, 0, dcdc1_dcdc2_ranges,
-			   2, 4000, 0),
+			   2, 4000, 0, TPS65218_REG_SEQ3,
+			   TPS65218_SEQ3_DC2_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC3", TPS65218_DCDC_3, REGULATOR_VOLTAGE,
 			   tps65218_ldo1_dcdc34_ops, 64,
 			   TPS65218_REG_CONTROL_DCDC3,
 			   TPS65218_CONTROL_DCDC3_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC3_EN, 0, 0, ldo1_dcdc3_ranges, 2,
-			   0, 0),
+			   0, 0, TPS65218_REG_SEQ4, TPS65218_SEQ4_DC3_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC4", TPS65218_DCDC_4, REGULATOR_VOLTAGE,
 			   tps65218_ldo1_dcdc34_ops, 53,
 			   TPS65218_REG_CONTROL_DCDC4,
 			   TPS65218_CONTROL_DCDC4_MASK, TPS65218_REG_ENABLE1,
 			   TPS65218_ENABLE1_DC4_EN, 0, 0, dcdc4_ranges, 2,
-			   0, 0),
+			   0, 0, TPS65218_REG_SEQ4, TPS65218_SEQ4_DC4_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC5", TPS65218_DCDC_5, REGULATOR_VOLTAGE,
 			   tps65218_dcdc56_pmic_ops, 1, -1, -1,
 			   TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC5_EN, 0, 0,
-			   NULL, 0, 0, 1000000),
+			   NULL, 0, 0, 1000000, TPS65218_REG_SEQ5,
+			   TPS65218_SEQ5_DC5_SEQ_MASK),
 	TPS65218_REGULATOR("DCDC6", TPS65218_DCDC_6, REGULATOR_VOLTAGE,
 			   tps65218_dcdc56_pmic_ops, 1, -1, -1,
 			   TPS65218_REG_ENABLE1, TPS65218_ENABLE1_DC6_EN, 0, 0,
-			   NULL, 0, 0, 1800000),
+			   NULL, 0, 0, 1800000, TPS65218_REG_SEQ5,
+			   TPS65218_SEQ5_DC6_SEQ_MASK),
 	TPS65218_REGULATOR("LDO1", TPS65218_LDO_1, REGULATOR_VOLTAGE,
 			   tps65218_ldo1_dcdc34_ops, 64,
 			   TPS65218_REG_CONTROL_LDO1,
 			   TPS65218_CONTROL_LDO1_MASK, TPS65218_REG_ENABLE2,
 			   TPS65218_ENABLE2_LDO1_EN, 0, 0, ldo1_dcdc3_ranges,
-			   2, 0, 0),
+			   2, 0, 0, TPS65218_REG_SEQ6,
+			   TPS65218_SEQ6_LDO1_SEQ_MASK),
 	TPS65218_REGULATOR("LS3", TPS65218_LS_3, REGULATOR_CURRENT,
 			   tps65218_ls3_ops, 0, 0, 0, TPS65218_REG_ENABLE2,
 			   TPS65218_ENABLE2_LS3_EN, TPS65218_REG_CONFIG2,
-			   TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0),
+			   TPS65218_CONFIG2_LS3ILIM_MASK, NULL, 0, 0, 0, 0, 0),
 };
 
 static int tps65218_regulator_probe(struct platform_device *pdev)
@@ -300,7 +347,8 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
 	struct regulator_dev *rdev;
 	const struct of_device_id	*match;
 	struct regulator_config config = { };
-	int id;
+	int id, ret;
+	unsigned int val;
 
 	match = of_match_device(tps65218_of_match, &pdev->dev);
 	if (!match)
@@ -327,6 +375,12 @@ static int tps65218_regulator_probe(struct platform_device *pdev)
 		return PTR_ERR(rdev);
 	}
 
+	ret = tps65218_reg_read(tps, regulators[id].bypass_reg, &val);
+	if (ret)
+		return ret;
+
+	tps->info[id]->strobe = val & regulators[id].bypass_mask;
+
 	return 0;
 }
 
diff --git a/drivers/regulator/twl-regulator.c b/drivers/regulator/twl-regulator.c
index faeb5ee92c9e..210681d6b743 100644
--- a/drivers/regulator/twl-regulator.c
+++ b/drivers/regulator/twl-regulator.c
@@ -905,7 +905,7 @@ static struct regulator_ops twlsmps_ops = {
 			twl4030reg_map_mode)
 #define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
 		TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
-			0x0, TWL6030, twl6030fixed_ops, 0x0)
+			0x0, TWL6030, twl6030fixed_ops, NULL)
 
 #define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
 static const struct twlreg_info TWL4030_INFO_##label = { \
diff --git a/include/linux/mfd/rn5t618.h b/include/linux/mfd/rn5t618.h
index c72d5344f3b3..cadc6543909d 100644
--- a/include/linux/mfd/rn5t618.h
+++ b/include/linux/mfd/rn5t618.h
@@ -20,6 +20,7 @@
 #define RN5T618_OTPVER			0x01
 #define RN5T618_IODAC			0x02
 #define RN5T618_VINDAC			0x03
+#define RN5T618_OUT32KEN		0x05
 #define RN5T618_CPUCNT			0x06
 #define RN5T618_PSWR			0x07
 #define RN5T618_PONHIS			0x09
@@ -38,6 +39,7 @@
 #define RN5T618_DC1_SLOT		0x16
 #define RN5T618_DC2_SLOT		0x17
 #define RN5T618_DC3_SLOT		0x18
+#define RN5T618_DC4_SLOT		0x19
 #define RN5T618_LDO1_SLOT		0x1b
 #define RN5T618_LDO2_SLOT		0x1c
 #define RN5T618_LDO3_SLOT		0x1d
@@ -54,12 +56,16 @@
 #define RN5T618_DC2CTL2			0x2f
 #define RN5T618_DC3CTL			0x30
 #define RN5T618_DC3CTL2			0x31
+#define RN5T618_DC4CTL			0x32
+#define RN5T618_DC4CTL2			0x33
 #define RN5T618_DC1DAC			0x36
 #define RN5T618_DC2DAC			0x37
 #define RN5T618_DC3DAC			0x38
+#define RN5T618_DC4DAC			0x39
 #define RN5T618_DC1DAC_SLP		0x3b
 #define RN5T618_DC2DAC_SLP		0x3c
 #define RN5T618_DC3DAC_SLP		0x3d
+#define RN5T618_DC4DAC_SLP		0x3e
 #define RN5T618_DCIREN			0x40
 #define RN5T618_DCIRQ			0x41
 #define RN5T618_DCIRMON			0x42
@@ -211,6 +217,7 @@ enum {
 	RN5T618_DCDC1,
 	RN5T618_DCDC2,
 	RN5T618_DCDC3,
+	RN5T618_DCDC4,
 	RN5T618_LDO1,
 	RN5T618_LDO2,
 	RN5T618_LDO3,
@@ -221,8 +228,14 @@ enum {
 	RN5T618_REG_NUM,
 };
 
+enum {
+	RN5T567 = 0,
+	RN5T618,
+};
+
 struct rn5t618 {
 	struct regmap *regmap;
+	long variant;
 };
 
 #endif /* __LINUX_MFD_RN5T618_H */
diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h
index ac7fba44d7e4..1c88231496d3 100644
--- a/include/linux/mfd/tps65217.h
+++ b/include/linux/mfd/tps65217.h
@@ -257,6 +257,7 @@ struct tps65217 {
 	unsigned long id;
 	struct regulator_desc desc[TPS65217_NUM_REGULATOR];
 	struct regmap *regmap;
+	u8 *strobes;
 };
 
 static inline struct tps65217 *dev_to_tps65217(struct device *dev)
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index d58f3b5f585a..7fdf5326f34e 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -246,6 +246,7 @@ enum tps65218_irqs {
  * @name:		Voltage regulator name
  * @min_uV:		minimum micro volts
  * @max_uV:		minimum micro volts
+ * @strobe:		sequencing strobe value for the regulator
  *
  * This data is used to check the regualtor voltage limits while setting.
  */
@@ -254,6 +255,7 @@ struct tps_info {
 	const char *name;
 	int min_uV;
 	int max_uV;
+	int strobe;
 };
 
 /**
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 48603506f8de..cae500b2c1d7 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -224,7 +224,6 @@ int regulator_bulk_force_disable(int num_consumers,
 void regulator_bulk_free(int num_consumers,
 			 struct regulator_bulk_data *consumers);
 
-int regulator_can_change_voltage(struct regulator *regulator);
 int regulator_count_voltages(struct regulator *regulator);
 int regulator_list_voltage(struct regulator *regulator, unsigned selector);
 int regulator_is_supported_voltage(struct regulator *regulator,
@@ -436,11 +435,6 @@ static inline void regulator_bulk_free(int num_consumers,
 {
 }
 
-static inline int regulator_can_change_voltage(struct regulator *regulator)
-{
-	return 0;
-}
-
 static inline int regulator_set_voltage(struct regulator *regulator,
 					int min_uV, int max_uV)
 {
diff --git a/include/linux/regulator/da9211.h b/include/linux/regulator/da9211.h
index a43a5ca1167b..80cb40b7c88d 100644
--- a/include/linux/regulator/da9211.h
+++ b/include/linux/regulator/da9211.h
@@ -1,5 +1,6 @@
 /*
- * da9211.h - Regulator device driver for DA9211/DA9213/DA9215
+ * da9211.h - Regulator device driver for DA9211/DA9212
+ * /DA9213/DA9214/DA9215
  * Copyright (C) 2015  Dialog Semiconductor Ltd.
  *
  * This program is free software; you can redistribute it and/or
@@ -22,7 +23,9 @@
 
 enum da9211_chip_id {
 	DA9211,
+	DA9212,
 	DA9213,
+	DA9214,
 	DA9215,
 };
 
diff --git a/include/linux/regulator/mt6323-regulator.h b/include/linux/regulator/mt6323-regulator.h
new file mode 100644
index 000000000000..67011cd1ce55
--- /dev/null
+++ b/include/linux/regulator/mt6323-regulator.h
@@ -0,0 +1,52 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Chen Zhong <chen.zhong@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6323_H
+#define __LINUX_REGULATOR_MT6323_H
+
+enum {
+	MT6323_ID_VPROC = 0,
+	MT6323_ID_VSYS,
+	MT6323_ID_VPA,
+	MT6323_ID_VTCXO,
+	MT6323_ID_VCN28,
+	MT6323_ID_VCN33_BT,
+	MT6323_ID_VCN33_WIFI,
+	MT6323_ID_VA,
+	MT6323_ID_VCAMA,
+	MT6323_ID_VIO28 = 9,
+	MT6323_ID_VUSB,
+	MT6323_ID_VMC,
+	MT6323_ID_VMCH,
+	MT6323_ID_VEMC3V3,
+	MT6323_ID_VGP1,
+	MT6323_ID_VGP2,
+	MT6323_ID_VGP3,
+	MT6323_ID_VCN18,
+	MT6323_ID_VSIM1,
+	MT6323_ID_VSIM2,
+	MT6323_ID_VRTC,
+	MT6323_ID_VCAMAF,
+	MT6323_ID_VIBR,
+	MT6323_ID_VRF18,
+	MT6323_ID_VM,
+	MT6323_ID_VIO18,
+	MT6323_ID_VCAMD,
+	MT6323_ID_VCAMIO,
+	MT6323_ID_RG_MAX,
+};
+
+#define MT6323_MAX_REGULATOR	MT6323_ID_RG_MAX
+
+#endif /* __LINUX_REGULATOR_MT6323_H */
author	Linus Torvalds	2016-07-26 19:40:43 -0700
committer	Linus Torvalds	2016-07-26 19:40:43 -0700
commit	6097d55e10a7e190279e99318a0e075c8d1dce9e (patch)
tree	39c49a19bf0b1b5f9a8ce1f06412517ecc2dd133
parent	ae9799975ccf5f1b2c30227d6d02aa4129750a64 (diff)
parent	a485f5fc8c8e631c32c65e5ee2bb5719400435d6 (diff)