Merge branch 'imx/cleanup' into next/cleanup

23 files changed, 379 insertions, 493 deletions

diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index db6394a77e85..6cc821384ccd 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -8,9 +8,8 @@ obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o
 obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
 obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 
-obj-$(CONFIG_SOC_IMX31) += mm-imx31.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx35.o cpu-imx35.o clock-imx35.o ehci-imx35.o
-obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
 
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
diff --git a/arch/arm/mach-imx/cache-l2x0.c b/arch/arm/mach-imx/cache-l2x0.c
deleted file mode 100644
index 69d1322add3c..000000000000
--- a/arch/arm/mach-imx/cache-l2x0.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Pengutronix
- * Sascha Hauer <s.hauer@pengutronix.de>
- * Juergen Beisert <j.beisert@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/kernel.h>
-
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/hardware.h>
-
-static int mxc_init_l2x0(void)
-{
-	void __iomem *l2x0_base;
-	void __iomem *clkctl_base;
-
-	if (!cpu_is_mx31() && !cpu_is_mx35())
-		return 0;
-
-/*
- * First of all, we must repair broken chip settings. There are some
- * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
- * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
- * Workaraound is to setup the correct register setting prior enabling the
- * L2 cache. This should not hurt already working CPUs, as they are using the
- * same value.
- */
-#define L2_MEM_VAL 0x10
-
-	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
-	if (clkctl_base != NULL) {
-		writel(0x00000515, clkctl_base + L2_MEM_VAL);
-		iounmap(clkctl_base);
-	} else {
-		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
-	}
-
-	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
-	if (IS_ERR(l2x0_base)) {
-		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
-				PTR_ERR(l2x0_base));
-		return 0;
-	}
-
-	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
-
-	return 0;
-}
-arch_initcall(mxc_init_l2x0);
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
new file mode 100644
index 000000000000..9f0e82ec3398
--- /dev/null
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -0,0 +1,256 @@
+/*
+ *  Copyright (C) 1999,2000 Arm Limited
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *    - add MX31 specific definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/err.h>
+
+#include <asm/pgtable.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/map.h>
+
+#include <mach/common.h>
+#include <mach/devices-common.h>
+#include <mach/hardware.h>
+#include <mach/iomux-v3.h>
+#include <mach/irqs.h>
+
+static void imx3_idle(void)
+{
+	unsigned long reg = 0;
+	__asm__ __volatile__(
+		/* disable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"bic %0, %0, #0x00001000\n"
+		"bic %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		/* invalidate I cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c5, 0\n"
+		/* clear and invalidate D cache */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c14, 0\n"
+		/* WFI */
+		"mov %0, #0\n"
+		"mcr p15, 0, %0, c7, c0, 4\n"
+		"nop\n" "nop\n" "nop\n" "nop\n"
+		"nop\n" "nop\n" "nop\n"
+		/* enable I and D cache */
+		"mrc p15, 0, %0, c1, c0, 0\n"
+		"orr %0, %0, #0x00001000\n"
+		"orr %0, %0, #0x00000004\n"
+		"mcr p15, 0, %0, c1, c0, 0\n"
+		: "=r" (reg));
+}
+
+static void __iomem *imx3_ioremap(unsigned long phys_addr, size_t size,
+				  unsigned int mtype)
+{
+	if (mtype == MT_DEVICE) {
+		/*
+		 * Access all peripherals below 0x80000000 as nonshared device
+		 * on mx3, but leave l2cc alone.  Otherwise cache corruptions
+		 * can occur.
+		 */
+		if (phys_addr < 0x80000000 &&
+				!addr_in_module(phys_addr, MX3x_L2CC))
+			mtype = MT_DEVICE_NONSHARED;
+	}
+
+	return __arm_ioremap(phys_addr, size, mtype);
+}
+
+void imx3_init_l2x0(void)
+{
+	void __iomem *l2x0_base;
+	void __iomem *clkctl_base;
+
+/*
+ * First of all, we must repair broken chip settings. There are some
+ * i.MX35 CPUs in the wild, comming with bogus L2 cache settings. These
+ * misconfigured CPUs will run amok immediately when the L2 cache gets enabled.
+ * Workaraound is to setup the correct register setting prior enabling the
+ * L2 cache. This should not hurt already working CPUs, as they are using the
+ * same value.
+ */
+#define L2_MEM_VAL 0x10
+
+	clkctl_base = ioremap(MX35_CLKCTL_BASE_ADDR, 4096);
+	if (clkctl_base != NULL) {
+		writel(0x00000515, clkctl_base + L2_MEM_VAL);
+		iounmap(clkctl_base);
+	} else {
+		pr_err("L2 cache: Cannot fix timing. Trying to continue without\n");
+	}
+
+	l2x0_base = ioremap(MX3x_L2CC_BASE_ADDR, 4096);
+	if (IS_ERR(l2x0_base)) {
+		printk(KERN_ERR "remapping L2 cache area failed with %ld\n",
+				PTR_ERR(l2x0_base));
+		return;
+	}
+
+	l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+}
+
+static struct map_desc mx31_io_desc[] __initdata = {
+	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+/*
+ * This function initializes the memory map. It is called during the
+ * system startup to create static physical to virtual memory mappings
+ * for the IO modules.
+ */
+void __init mx31_map_io(void)
+{
+	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
+}
+
+static struct map_desc mx35_io_desc[] __initdata = {
+	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
+	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
+	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
+};
+
+void __init mx35_map_io(void)
+{
+	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
+}
+
+void __init imx31_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX31);
+	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init imx35_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX35);
+	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
+	imx_idle = imx3_idle;
+	imx_ioremap = imx3_ioremap;
+}
+
+void __init mx31_init_irq(void)
+{
+	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
+}
+
+void __init mx35_init_irq(void)
+{
+	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
+}
+
+static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
+	.per_2_per_addr = 1677,
+};
+
+static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
+	.ap_2_ap_addr = 423,
+	.ap_2_bp_addr = 829,
+	.bp_2_ap_addr = 1029,
+};
+
+static struct sdma_platform_data imx31_sdma_pdata __initdata = {
+	.fw_name = "sdma-imx31-to2.bin",
+	.script_addrs = &imx31_to2_sdma_script,
+};
+
+void __init imx31_soc_init(void)
+{
+	int to_version = mx31_revision() >> 4;
+
+	imx3_init_l2x0();
+
+	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+
+	if (to_version == 1) {
+		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
+			strlen(imx31_sdma_pdata.fw_name));
+		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
+	}
+
+	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
+}
+
+static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
+	.ap_2_ap_addr = 642,
+	.uart_2_mcu_addr = 817,
+	.mcu_2_app_addr = 747,
+	.uartsh_2_mcu_addr = 1183,
+	.per_2_shp_addr = 1033,
+	.mcu_2_shp_addr = 961,
+	.ata_2_mcu_addr = 1333,
+	.mcu_2_ata_addr = 1252,
+	.app_2_mcu_addr = 683,
+	.shp_2_per_addr = 1111,
+	.shp_2_mcu_addr = 892,
+};
+
+static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
+	.ap_2_ap_addr = 729,
+	.uart_2_mcu_addr = 904,
+	.per_2_app_addr = 1597,
+	.mcu_2_app_addr = 834,
+	.uartsh_2_mcu_addr = 1270,
+	.per_2_shp_addr = 1120,
+	.mcu_2_shp_addr = 1048,
+	.ata_2_mcu_addr = 1429,
+	.mcu_2_ata_addr = 1339,
+	.app_2_per_addr = 1531,
+	.app_2_mcu_addr = 770,
+	.shp_2_per_addr = 1198,
+	.shp_2_mcu_addr = 979,
+};
+
+static struct sdma_platform_data imx35_sdma_pdata __initdata = {
+	.fw_name = "sdma-imx35-to2.bin",
+	.script_addrs = &imx35_to2_sdma_script,
+};
+
+void __init imx35_soc_init(void)
+{
+	int to_version = mx35_revision() >> 4;
+
+	imx3_init_l2x0();
+
+	/* i.mx35 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
+	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
+	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
+
+	if (to_version == 1) {
+		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
+			strlen(imx35_sdma_pdata.fw_name));
+		imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
+	}
+
+	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
+}
diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c
deleted file mode 100644
index b7c55e7db000..000000000000
--- a/arch/arm/mach-imx/mm-imx31.c
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx31_io_desc[] __initdata = {
-	imx_map_entry(MX31, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX31, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX31, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx31_map_io(void)
-{
-	iotable_init(mx31_io_desc, ARRAY_SIZE(mx31_io_desc));
-}
-
-void __init imx31_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX31);
-	mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
-}
-
-void __init mx31_init_irq(void)
-{
-	mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = {
-	.per_2_per_addr = 1677,
-};
-
-static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = {
-	.ap_2_ap_addr = 423,
-	.ap_2_bp_addr = 829,
-	.bp_2_ap_addr = 1029,
-};
-
-static struct sdma_platform_data imx31_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx31-to2.bin",
-	.script_addrs = &imx31_to2_sdma_script,
-};
-
-void __init imx31_soc_init(void)
-{
-	int to_version = mx31_revision() >> 4;
-
-	mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
-
-	if (to_version == 1) {
-		strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
-			strlen(imx31_sdma_pdata.fw_name));
-		imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script;
-	}
-
-	imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata);
-}
diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c
deleted file mode 100644
index f49bac7a1ede..000000000000
--- a/arch/arm/mach-imx/mm-imx35.c
+++ /dev/null
@@ -1,109 +0,0 @@
-/*
- *  Copyright (C) 1999,2000 Arm Limited
- *  Copyright (C) 2000 Deep Blue Solutions Ltd
- *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
- *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- *    - add MX31 specific definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/err.h>
-
-#include <asm/pgtable.h>
-#include <asm/mach/map.h>
-#include <asm/hardware/cache-l2x0.h>
-
-#include <mach/common.h>
-#include <mach/devices-common.h>
-#include <mach/hardware.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-static struct map_desc mx35_io_desc[] __initdata = {
-	imx_map_entry(MX35, X_MEMC, MT_DEVICE),
-	imx_map_entry(MX35, AVIC, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS1, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, AIPS2, MT_DEVICE_NONSHARED),
-	imx_map_entry(MX35, SPBA0, MT_DEVICE_NONSHARED),
-};
-
-void __init mx35_map_io(void)
-{
-	iotable_init(mx35_io_desc, ARRAY_SIZE(mx35_io_desc));
-}
-
-void __init imx35_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX35);
-	mxc_iomux_v3_init(MX35_IO_ADDRESS(MX35_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
-}
-
-void __init mx35_init_irq(void)
-{
-	mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR));
-}
-
-static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = {
-	.ap_2_ap_addr = 642,
-	.uart_2_mcu_addr = 817,
-	.mcu_2_app_addr = 747,
-	.uartsh_2_mcu_addr = 1183,
-	.per_2_shp_addr = 1033,
-	.mcu_2_shp_addr = 961,
-	.ata_2_mcu_addr = 1333,
-	.mcu_2_ata_addr = 1252,
-	.app_2_mcu_addr = 683,
-	.shp_2_per_addr = 1111,
-	.shp_2_mcu_addr = 892,
-};
-
-static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = {
-	.ap_2_ap_addr = 729,
-	.uart_2_mcu_addr = 904,
-	.per_2_app_addr = 1597,
-	.mcu_2_app_addr = 834,
-	.uartsh_2_mcu_addr = 1270,
-	.per_2_shp_addr = 1120,
-	.mcu_2_shp_addr = 1048,
-	.ata_2_mcu_addr = 1429,
-	.mcu_2_ata_addr = 1339,
-	.app_2_per_addr = 1531,
-	.app_2_mcu_addr = 770,
-	.shp_2_per_addr = 1198,
-	.shp_2_mcu_addr = 979,
-};
-
-static struct sdma_platform_data imx35_sdma_pdata __initdata = {
-	.fw_name = "sdma-imx35-to2.bin",
-	.script_addrs = &imx35_to2_sdma_script,
-};
-
-void __init imx35_soc_init(void)
-{
-	int to_version = mx35_revision() >> 4;
-
-	/* i.mx35 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0);
-	mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0);
-	mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0);
-
-	if (to_version == 1) {
-		strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin",
-			strlen(imx35_sdma_pdata.fw_name));
-		imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script;
-	}
-
-	imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata);
-}
diff --git a/arch/arm/mach-imx/pm-imx27.c b/arch/arm/mach-imx/pm-imx27.c
index acf17691d2cc..e455d2f855bf 100644
--- a/arch/arm/mach-imx/pm-imx27.c
+++ b/arch/arm/mach-imx/pm-imx27.c
@@ -11,7 +11,7 @@
 #include <linux/suspend.h>
 #include <linux/io.h>
 #include <mach/system.h>
-#include <mach/mx27.h>
+#include <mach/hardware.h>
 
 static int mx27_suspend_enter(suspend_state_t state)
 {
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 7f452433a690..9565304b7282 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -4,7 +4,6 @@
 
 # Object file lists.
 obj-y   := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
-obj-$(CONFIG_SOC_IMX50) += mm-mx50.o
 
 obj-$(CONFIG_PM) += pm-imx5.o
 obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c
deleted file mode 100644
index 77e374c726fa..000000000000
--- a/arch/arm/mach-mx5/mm-mx50.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
-
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
-
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/iomux-v3.h>
-#include <mach/irqs.h>
-
-/*
- * Define the MX50 memory map.
- */
-static struct map_desc mx50_io_desc[] __initdata = {
-	imx_map_entry(MX50, TZIC, MT_DEVICE),
-	imx_map_entry(MX50, SPBA0, MT_DEVICE),
-	imx_map_entry(MX50, AIPS1, MT_DEVICE),
-	imx_map_entry(MX50, AIPS2, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx50_map_io(void)
-{
-	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
-}
-
-void __init imx50_init_early(void)
-{
-	mxc_set_cpu_type(MXC_CPU_MX50);
-	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
-	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
-}
-
-void __init mx50_init_irq(void)
-{
-	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
-}
-
-void __init imx50_soc_init(void)
-{
-	/* i.mx50 has the i.mx31 type gpio */
-	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
-	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
-	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
-	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
-	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
-	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
-}
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c
index fcc5c4ce53f1..26eacc9d0d90 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-mx5/mm.c
@@ -21,12 +21,27 @@
 #include <mach/devices-common.h>
 #include <mach/iomux-v3.h>
 
+static void imx5_idle(void)
+{
+	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+}
+
+/*
+ * Define the MX50 memory map.
+ */
+static struct map_desc mx50_io_desc[] __initdata = {
+	imx_map_entry(MX50, TZIC, MT_DEVICE),
+	imx_map_entry(MX50, SPBA0, MT_DEVICE),
+	imx_map_entry(MX50, AIPS1, MT_DEVICE),
+	imx_map_entry(MX50, AIPS2, MT_DEVICE),
+};
+
 /*
  * Define the MX51 memory map.
  */
 static struct map_desc mx51_io_desc[] __initdata = {
+	imx_map_entry(MX51, TZIC, MT_DEVICE),
 	imx_map_entry(MX51, IRAM, MT_DEVICE),
-	imx_map_entry(MX51, DEBUG, MT_DEVICE),
 	imx_map_entry(MX51, AIPS1, MT_DEVICE),
 	imx_map_entry(MX51, SPBA0, MT_DEVICE),
 	imx_map_entry(MX51, AIPS2, MT_DEVICE),
@@ -36,6 +51,7 @@ static struct map_desc mx51_io_desc[] __initdata = {
  * Define the MX53 memory map.
  */
 static struct map_desc mx53_io_desc[] __initdata = {
+	imx_map_entry(MX53, TZIC, MT_DEVICE),
 	imx_map_entry(MX53, AIPS1, MT_DEVICE),
 	imx_map_entry(MX53, SPBA0, MT_DEVICE),
 	imx_map_entry(MX53, AIPS2, MT_DEVICE),
@@ -46,21 +62,34 @@ static struct map_desc mx53_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
+void __init mx50_map_io(void)
+{
+	iotable_init(mx50_io_desc, ARRAY_SIZE(mx50_io_desc));
+}
+
 void __init mx51_map_io(void)
 {
 	iotable_init(mx51_io_desc, ARRAY_SIZE(mx51_io_desc));
 }
 
+void __init mx53_map_io(void)
+{
+	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+}
+
+void __init imx50_init_early(void)
+{
+	mxc_set_cpu_type(MXC_CPU_MX50);
+	mxc_iomux_v3_init(MX50_IO_ADDRESS(MX50_IOMUXC_BASE_ADDR));
+	mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR));
+}
+
 void __init imx51_init_early(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX51);
 	mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR));
 	mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG1_BASE_ADDR));
-}
-
-void __init mx53_map_io(void)
-{
-	iotable_init(mx53_io_desc, ARRAY_SIZE(mx53_io_desc));
+	imx_idle = imx5_idle;
 }
 
 void __init imx53_init_early(void)
@@ -70,35 +99,19 @@ void __init imx53_init_early(void)
 	mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR));
 }
 
-void __init mx51_init_irq(void)
+void __init mx50_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	if (mx51_revision() < IMX_CHIP_REVISION_2_0)
-		tzic_addr = MX51_TZIC_BASE_ADDR_TO1;
-	else
-		tzic_addr = MX51_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
+	tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR));
+}
 
-	tzic_init_irq(tzic_virt);
+void __init mx51_init_irq(void)
+{
+	tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR));
 }
 
 void __init mx53_init_irq(void)
 {
-	unsigned long tzic_addr;
-	void __iomem *tzic_virt;
-
-	tzic_addr = MX53_TZIC_BASE_ADDR;
-
-	tzic_virt = ioremap(tzic_addr, SZ_16K);
-	if (!tzic_virt)
-		panic("unable to map TZIC interrupt controller\n");
-
-	tzic_init_irq(tzic_virt);
+	tzic_init_irq(MX53_IO_ADDRESS(MX53_TZIC_BASE_ADDR));
 }
 
 static struct sdma_script_start_addrs imx51_sdma_script __initdata = {
@@ -138,6 +151,17 @@ static struct sdma_platform_data imx53_sdma_pdata __initdata = {
 	.script_addrs = &imx53_sdma_script,
 };
 
+void __init imx50_soc_init(void)
+{
+	/* i.mx50 has the i.mx31 type gpio */
+	mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH);
+	mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH);
+	mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH);
+	mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH);
+	mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH);
+	mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH);
+}
+
 void __init imx51_soc_init(void)
 {
 	/* i.mx51 has the i.mx31 type gpio */
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
index e4529af0da72..0624fb8edffb 100644
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ b/arch/arm/mach-mx5/pm-imx5.c
@@ -14,7 +14,8 @@
 #include <linux/err.h>
 #include <asm/cacheflush.h>
 #include <asm/tlbflush.h>
-#include <mach/system.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
 #include "crm_regs.h"
 
 static struct clk *gpc_dvfs_clk;
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-mx5/system.c
index 76ae8dc33e00..144ebebc4a61 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-mx5/system.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <mach/hardware.h>
+#include <mach/common.h>
 #include "crm_regs.h"
 
 /* set cpu low power mode before WFI instruction. This function is called
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index 6c38262a3aaa..ea8dcb7742bc 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,11 +1,11 @@
 # Common support
-obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o
+obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o mm.o
 
 obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
-obj-$(CONFIG_SOC_IMX23) += clock-mx23.o mm-mx23.o
-obj-$(CONFIG_SOC_IMX28) += clock-mx28.o mm-mx28.o
+obj-$(CONFIG_SOC_IMX23) += clock-mx23.o
+obj-$(CONFIG_SOC_IMX28) += clock-mx28.o
 
 obj-$(CONFIG_MACH_STMP378X_DEVB) += mach-stmp378x_devb.o
 obj-$(CONFIG_MACH_MX23EVK) += mach-mx23evk.o
diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c
index 3f86e7a4d2cc..8b3aa7afdae0 100644
--- a/arch/arm/mach-mxs/mach-mx28evk.c
+++ b/arch/arm/mach-mxs/mach-mx28evk.c
@@ -351,6 +351,11 @@ static struct mxs_mmc_platform_data mx28evk_mmc_pdata[] __initdata = {
 	},
 };
 
+static struct gpio mx28evk_lcd_gpios[] = {
+	{ MX28EVK_LCD_ENABLE, GPIOF_OUT_INIT_HIGH, "lcd-enable" },
+	{ MX28EVK_BL_ENABLE, GPIOF_OUT_INIT_HIGH, "bl-enable" },
+};
+
 static void __init mx28evk_init(void)
 {
 	int ret;
@@ -377,19 +382,12 @@ static void __init mx28evk_init(void)
 		mx28_add_flexcan(1, &mx28evk_flexcan_pdata[1]);
 	}
 
-	ret = gpio_request_one(MX28EVK_LCD_ENABLE, GPIOF_DIR_OUT, "lcd-enable");
+	ret = gpio_request_array(mx28evk_lcd_gpios,
+				 ARRAY_SIZE(mx28evk_lcd_gpios));
 	if (ret)
-		pr_warn("failed to request gpio lcd-enable: %d\n", ret);
+		pr_warn("failed to request gpio pins for lcd: %d\n", ret);
 	else
-		gpio_set_value(MX28EVK_LCD_ENABLE, 1);
-
-	ret = gpio_request_one(MX28EVK_BL_ENABLE, GPIOF_DIR_OUT, "bl-enable");
-	if (ret)
-		pr_warn("failed to request gpio bl-enable: %d\n", ret);
-	else
-		gpio_set_value(MX28EVK_BL_ENABLE, 1);
-
-	mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
+		mx28_add_mxsfb(&mx28evk_mxsfb_pdata);
 
 	/* power on mmc slot by writing 0 to the gpio */
 	ret = gpio_request_one(MX28EVK_MMC0_SLOT_POWER, GPIOF_OUT_INIT_LOW,
@@ -402,7 +400,8 @@ static void __init mx28evk_init(void)
 			       "mmc1-slot-power");
 	if (ret)
 		pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret);
-	mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
+	else
+		mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]);
 
 	gpio_led_register_device(0, &mx28evk_led_data);
 }
diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c
deleted file mode 100644
index 1b2345ac1a87..000000000000
--- a/arch/arm/mach-mxs/mm-mx23.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License.  You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- *
- * Create static mapping between physical to virtual memory.
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/mx23.h>
-#include <mach/common.h>
-#include <mach/iomux.h>
-
-/*
- * Define the MX23 memory map.
- */
-static struct map_desc mx23_io_desc[] __initdata = {
-	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
-	mxs_map_entry(MX23, IO, MT_DEVICE),
-};
-
-/*
- * This function initializes the memory map. It is called during the
- * system startup to create static physical to virtual memory mappings
- * for the IO modules.
- */
-void __init mx23_map_io(void)
-{
-	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
-}
-
-void __init mx23_init_irq(void)
-{
-	icoll_init_irq();
-}
diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm.c
index b6e18ddb92c0..50af5ceebf6d 100644
--- a/arch/arm/mach-mxs/mm-mx28.c
+++ b/arch/arm/mach-mxs/mm.c
@@ -16,11 +16,20 @@
 
 #include <asm/mach/map.h>
 
+#include <mach/mx23.h>
 #include <mach/mx28.h>
 #include <mach/common.h>
 #include <mach/iomux.h>
 
 /*
+ * Define the MX23 memory map.
+ */
+static struct map_desc mx23_io_desc[] __initdata = {
+	mxs_map_entry(MX23, OCRAM, MT_DEVICE),
+	mxs_map_entry(MX23, IO, MT_DEVICE),
+};
+
+/*
  * Define the MX28 memory map.
  */
 static struct map_desc mx28_io_desc[] __initdata = {
@@ -33,6 +42,16 @@ static struct map_desc mx28_io_desc[] __initdata = {
  * system startup to create static physical to virtual memory mappings
  * for the IO modules.
  */
+void __init mx23_map_io(void)
+{
+	iotable_init(mx23_io_desc, ARRAY_SIZE(mx23_io_desc));
+}
+
+void __init mx23_init_irq(void)
+{
+	icoll_init_irq();
+}
+
 void __init mx28_map_io(void)
 {
 	iotable_init(mx28_io_desc, ARRAY_SIZE(mx28_io_desc));
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 91d810cef6fa..d7149d1bd32c 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -71,4 +71,15 @@ extern void mxc_arch_reset_init(void __iomem *);
 extern void mx51_efikamx_reset(void);
 extern int mx53_revision(void);
 extern int mx53_display_revision(void);
+
+enum mxc_cpu_pwr_mode {
+	WAIT_CLOCKED,		/* wfi only */
+	WAIT_UNCLOCKED,		/* WAIT */
+	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
+	STOP_POWER_ON,		/* just STOP */
+	STOP_POWER_OFF,		/* STOP + SRPG */
+};
+
+extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h
index f57ec47d6fd5..eba3118adfbb 100644
--- a/arch/arm/plat-mxc/include/mach/hardware.h
+++ b/arch/arm/plat-mxc/include/mach/hardware.h
@@ -81,11 +81,16 @@
  *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  * mx51:
+ *	TZIC	0xe0000000+0x004000	->	0xf5000000+0x004000
  *	IRAM	0x1ffe0000+0x020000	->	0xf4fe0000+0x020000
- *	DEBUG	0x60000000+0x100000	->	0xf5000000+0x100000
  *	SPBA0	0x70000000+0x100000	->	0xf5400000+0x100000
  *	AIPS1	0x73f00000+0x100000	->	0xf5700000+0x100000
  *	AIPS2	0x83f00000+0x100000	->	0xf4300000+0x100000
+ * mx53:
+ *	TZIC	0x0fffc000+0x004000	->	0xf4bfc000+0x004000
+ *	SPBA0	0x50000000+0x100000	->	0xf5400000+0x100000
+ *	AIPS1	0x53f00000+0x100000	->	0xf5700000+0x100000
+ *	AIPS2	0x63f00000+0x100000	->	0xf5300000+0x100000
  */
 #define IMX_IO_P2V(x)	(						\
 			0xf4000000 +					\
diff --git a/arch/arm/plat-mxc/include/mach/io.h b/arch/arm/plat-mxc/include/mach/io.h
index 4347a87d2bb0..338300b18b00 100644
--- a/arch/arm/plat-mxc/include/mach/io.h
+++ b/arch/arm/plat-mxc/include/mach/io.h
@@ -14,32 +14,22 @@
 /* Allow IO space to be anywhere in the memory */
 #define IO_SPACE_LIMIT 0xffffffff
 
-#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35)
-#include <mach/hardware.h>
-
 #define __arch_ioremap __imx_ioremap
 #define __arch_iounmap __iounmap
 
 #define addr_in_module(addr, mod) \
 	((unsigned long)(addr) - mod ## _BASE_ADDR < mod ## _SIZE)
 
+extern void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int);
+
 static inline void __iomem *
 __imx_ioremap(unsigned long phys_addr, size_t size, unsigned int mtype)
 {
-	if (mtype == MT_DEVICE && (cpu_is_mx31() || cpu_is_mx35())) {
-		/*
-		 * Access all peripherals below 0x80000000 as nonshared device
-		 * on mx3, but leave l2cc alone.  Otherwise cache corruptions
-		 * can occur.
-		 */
-		if (phys_addr < 0x80000000 &&
-				!addr_in_module(phys_addr, MX3x_L2CC))
-			mtype = MT_DEVICE_NONSHARED;
-	}
-
-	return __arm_ioremap(phys_addr, size, mtype);
+	if (imx_ioremap != NULL)
+		return imx_ioremap(phys_addr, size, mtype);
+	else
+		return __arm_ioremap(phys_addr, size, mtype);
 }
-#endif
 
 /* io address mapping macro */
 #define __io(a)		__typesafe_io(a)
diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h
index 9666e31956b7..cdf07c65ec1e 100644
--- a/arch/arm/plat-mxc/include/mach/mx51.h
+++ b/arch/arm/plat-mxc/include/mach/mx51.h
@@ -18,18 +18,6 @@
 #define MX51_GPU_CTRL_BASE_ADDR		0x30000000
 #define MX51_IPU_CTRL_BASE_ADDR		0x40000000
 
-#define MX51_DEBUG_BASE_ADDR		0x60000000
-#define MX51_DEBUG_SIZE			SZ_1M
-
-#define MX51_ETB_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x01000)
-#define MX51_ETM_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x02000)
-#define MX51_TPIU_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x03000)
-#define MX51_CTI0_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x04000)
-#define MX51_CTI1_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x05000)
-#define MX51_CTI2_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x06000)
-#define MX51_CTI3_BASE_ADDR		(MX51_DEBUG_BASE_ADDR + 0x07000)
-#define MX51_CORTEX_DBG_BASE_ADDR	(MX51_DEBUG_BASE_ADDR + 0x08000)
-
 /*
  * SPBA global module enabled #0
  */
@@ -135,6 +123,7 @@
 
 #define MX51_GPU2D_BASE_ADDR		0xd0000000
 #define MX51_TZIC_BASE_ADDR		0xe0000000
+#define MX51_TZIC_SIZE			SZ_16K
 
 #define MX51_IO_P2V(x)			IMX_IO_P2V(x)
 #define MX51_IO_ADDRESS(x)		IOMEM(MX51_IO_P2V(x))
@@ -353,7 +342,4 @@ extern int mx51_revision(void);
 extern void mx51_display_revision(void);
 #endif
 
-/* tape-out 1 defines */
-#define MX51_TZIC_BASE_ADDR_TO1		0x8fffc000
-
 #endif	/* ifndef __MACH_MX51_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h
index 5e3c3236ebf3..a37e8c353994 100644
--- a/arch/arm/plat-mxc/include/mach/mx53.h
+++ b/arch/arm/plat-mxc/include/mach/mx53.h
@@ -9,6 +9,7 @@
 
 /* TZIC */
 #define MX53_TZIC_BASE_ADDR		0x0FFFC000
+#define MX53_TZIC_SIZE			SZ_16K
 
 /*
  * AHCI SATA
diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h
index 09879235a9f5..00a78193c681 100644
--- a/arch/arm/plat-mxc/include/mach/mxc.h
+++ b/arch/arm/plat-mxc/include/mach/mxc.h
@@ -183,13 +183,6 @@ struct cpu_op {
 };
 
 int tzic_enable_wake(int is_idle);
-enum mxc_cpu_pwr_mode {
-	WAIT_CLOCKED,		/* wfi only */
-	WAIT_UNCLOCKED,		/* WAIT */
-	WAIT_UNCLOCKED_POWER_OFF,	/* WAIT + SRPG */
-	STOP_POWER_ON,		/* just STOP */
-	STOP_POWER_OFF,		/* STOP + SRPG */
-};
 
 extern struct cpu_op *(*get_cpu_op)(int *op);
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h
index 51f02a9d41a3..cf88b3593fba 100644
--- a/arch/arm/plat-mxc/include/mach/system.h
+++ b/arch/arm/plat-mxc/include/mach/system.h
@@ -17,41 +17,12 @@
 #ifndef __ASM_ARCH_MXC_SYSTEM_H__
 #define __ASM_ARCH_MXC_SYSTEM_H__
 
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
+extern void (*imx_idle)(void);
 
 static inline void arch_idle(void)
 {
-	/* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */
-	if (cpu_is_mx31() || cpu_is_mx35()) {
-		unsigned long reg = 0;
-		__asm__ __volatile__(
-			/* disable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"bic %0, %0, #0x00001000\n"
-			"bic %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			/* invalidate I cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c5, 0\n"
-			/* clear and invalidate D cache */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c14, 0\n"
-			/* WFI */
-			"mov %0, #0\n"
-			"mcr p15, 0, %0, c7, c0, 4\n"
-			"nop\n" "nop\n" "nop\n" "nop\n"
-			"nop\n" "nop\n" "nop\n"
-			/* enable I and D cache */
-			"mrc p15, 0, %0, c1, c0, 0\n"
-			"orr %0, %0, #0x00001000\n"
-			"orr %0, %0, #0x00000004\n"
-			"mcr p15, 0, %0, c1, c0, 0\n"
-			: "=r" (reg));
-	} else if (cpu_is_mx51())
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+	if (imx_idle != NULL)
+		(imx_idle)();
 	else
 		cpu_do_idle();
 }
diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c
index 8024f2ac177c..9dad8dcc2ea9 100644
--- a/arch/arm/plat-mxc/system.c
+++ b/arch/arm/plat-mxc/system.c
@@ -28,6 +28,9 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
+void (*imx_idle)(void) = NULL;
+void __iomem *(*imx_ioremap)(unsigned long, size_t, unsigned int) = NULL;
+
 static void __iomem *wdog_base;
 
 /*