diff options
author | Vladimir Oltean | 2019-05-02 23:23:30 +0300 |
---|---|---|
committer | David S. Miller | 2019-05-03 10:49:17 -0400 |
commit | 8aa9ebccae87621d997707e4f25e53fddd7e30e4 (patch) | |
tree | 31fca4070adc3ba2cd7f17f84838f73d7fac95d8 | |
parent | 554aae35007e49f533d3d10e788295f7141725bc (diff) |
net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch
At this moment the following is supported:
* Link state management through phylib
* Autonomous L2 forwarding managed through iproute2 bridge commands.
IP termination must be done currently through the master netdevice,
since the switch is unmanaged at this point and using
DSA_TAG_PROTO_NONE.
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Georg Waibel <georg.waibel@sensor-technik.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r-- | MAINTAINERS | 6 | ||||
-rw-r--r-- | drivers/net/dsa/Kconfig | 2 | ||||
-rw-r--r-- | drivers/net/dsa/Makefile | 1 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/Kconfig | 16 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/Makefile | 8 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105.h | 138 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_clocking.c | 598 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_dynamic_config.c | 489 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_dynamic_config.h | 43 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 928 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_spi.c | 553 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_static_config.c | 949 | ||||
-rw-r--r-- | drivers/net/dsa/sja1105/sja1105_static_config.h | 250 | ||||
-rw-r--r-- | include/linux/dsa/sja1105.h | 19 |
14 files changed, 4000 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index ff029f3d0f13..25db3db8fe38 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -11120,6 +11120,12 @@ S: Maintained F: Documentation/devicetree/bindings/sound/sgtl5000.txt F: sound/soc/codecs/sgtl5000* +NXP SJA1105 ETHERNET SWITCH DRIVER +M: Vladimir Oltean <olteanv@gmail.com> +L: linux-kernel@vger.kernel.org +S: Maintained +F: drivers/net/dsa/sja1105 + NXP TDA998X DRM DRIVER M: Russell King <linux@armlinux.org.uk> S: Maintained diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig index 82560b710681..c6c5ecdbcaef 100644 --- a/drivers/net/dsa/Kconfig +++ b/drivers/net/dsa/Kconfig @@ -51,6 +51,8 @@ source "drivers/net/dsa/microchip/Kconfig" source "drivers/net/dsa/mv88e6xxx/Kconfig" +source "drivers/net/dsa/sja1105/Kconfig" + config NET_DSA_QCA8K tristate "Qualcomm Atheros QCA8K Ethernet switch family support" depends on NET_DSA diff --git a/drivers/net/dsa/Makefile b/drivers/net/dsa/Makefile index 82e5d794c41f..fefb6aaa82ba 100644 --- a/drivers/net/dsa/Makefile +++ b/drivers/net/dsa/Makefile @@ -18,3 +18,4 @@ obj-$(CONFIG_NET_DSA_VITESSE_VSC73XX) += vitesse-vsc73xx.o obj-y += b53/ obj-y += microchip/ obj-y += mv88e6xxx/ +obj-y += sja1105/ diff --git a/drivers/net/dsa/sja1105/Kconfig b/drivers/net/dsa/sja1105/Kconfig new file mode 100644 index 000000000000..038685bb9d57 --- /dev/null +++ b/drivers/net/dsa/sja1105/Kconfig @@ -0,0 +1,16 @@ +config NET_DSA_SJA1105 +tristate "NXP SJA1105 Ethernet switch family support" + depends on NET_DSA && SPI + select PACKING + select CRC32 + help + This is the driver for the NXP SJA1105 automotive Ethernet switch + family. These are 5-port devices and are managed over an SPI + interface. Probing is handled based on OF bindings and so is the + linkage to phylib. The driver supports the following revisions: + - SJA1105E (Gen. 1, No TT-Ethernet) + - SJA1105T (Gen. 1, TT-Ethernet) + - SJA1105P (Gen. 2, No SGMII, No TT-Ethernet) + - SJA1105Q (Gen. 2, No SGMII, TT-Ethernet) + - SJA1105R (Gen. 2, SGMII, No TT-Ethernet) + - SJA1105S (Gen. 2, SGMII, TT-Ethernet) diff --git a/drivers/net/dsa/sja1105/Makefile b/drivers/net/dsa/sja1105/Makefile new file mode 100644 index 000000000000..d3237b313a4e --- /dev/null +++ b/drivers/net/dsa/sja1105/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_NET_DSA_SJA1105) += sja1105.o + +sja1105-objs := \ + sja1105_spi.o \ + sja1105_main.o \ + sja1105_clocking.o \ + sja1105_static_config.o \ + sja1105_dynamic_config.o \ diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h new file mode 100644 index 000000000000..e01cb854cbcd --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -0,0 +1,138 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_H +#define _SJA1105_H + +#include <linux/dsa/sja1105.h> +#include <net/dsa.h> +#include "sja1105_static_config.h" + +#define SJA1105_NUM_PORTS 5 +#define SJA1105_NUM_TC 8 +#define SJA1105ET_FDB_BIN_SIZE 4 + +/* Keeps the different addresses between E/T and P/Q/R/S */ +struct sja1105_regs { + u64 device_id; + u64 prod_id; + u64 status; + u64 rgu; + u64 config; + u64 rmii_pll1; + u64 pad_mii_tx[SJA1105_NUM_PORTS]; + u64 cgu_idiv[SJA1105_NUM_PORTS]; + u64 rgmii_pad_mii_tx[SJA1105_NUM_PORTS]; + u64 mii_tx_clk[SJA1105_NUM_PORTS]; + u64 mii_rx_clk[SJA1105_NUM_PORTS]; + u64 mii_ext_tx_clk[SJA1105_NUM_PORTS]; + u64 mii_ext_rx_clk[SJA1105_NUM_PORTS]; + u64 rgmii_tx_clk[SJA1105_NUM_PORTS]; + u64 rmii_ref_clk[SJA1105_NUM_PORTS]; + u64 rmii_ext_tx_clk[SJA1105_NUM_PORTS]; + u64 mac[SJA1105_NUM_PORTS]; + u64 mac_hl1[SJA1105_NUM_PORTS]; + u64 mac_hl2[SJA1105_NUM_PORTS]; + u64 qlevel[SJA1105_NUM_PORTS]; +}; + +struct sja1105_info { + u64 device_id; + /* Needed for distinction between P and R, and between Q and S + * (since the parts with/without SGMII share the same + * switch core and device_id) + */ + u64 part_no; + const struct sja1105_dynamic_table_ops *dyn_ops; + const struct sja1105_table_ops *static_ops; + const struct sja1105_regs *regs; + int (*reset_cmd)(const void *ctx, const void *data); + const char *name; +}; + +struct sja1105_private { + struct sja1105_static_config static_config; + const struct sja1105_info *info; + struct gpio_desc *reset_gpio; + struct spi_device *spidev; + struct dsa_switch *ds; +}; + +#include "sja1105_dynamic_config.h" + +struct sja1105_spi_message { + u64 access; + u64 read_count; + u64 address; +}; + +typedef enum { + SPI_READ = 0, + SPI_WRITE = 1, +} sja1105_spi_rw_mode_t; + +/* From sja1105_spi.c */ +int sja1105_spi_send_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + void *packed_buf, size_t size_bytes); +int sja1105_spi_send_int(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u64 *value, u64 size_bytes); +int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 base_addr, + void *packed_buf, u64 buf_len); +int sja1105_static_config_upload(struct sja1105_private *priv); + +extern struct sja1105_info sja1105e_info; +extern struct sja1105_info sja1105t_info; +extern struct sja1105_info sja1105p_info; +extern struct sja1105_info sja1105q_info; +extern struct sja1105_info sja1105r_info; +extern struct sja1105_info sja1105s_info; + +/* From sja1105_clocking.c */ + +typedef enum { + XMII_MAC = 0, + XMII_PHY = 1, +} sja1105_mii_role_t; + +typedef enum { + XMII_MODE_MII = 0, + XMII_MODE_RMII = 1, + XMII_MODE_RGMII = 2, +} sja1105_phy_interface_t; + +typedef enum { + SJA1105_SPEED_10MBPS = 3, + SJA1105_SPEED_100MBPS = 2, + SJA1105_SPEED_1000MBPS = 1, + SJA1105_SPEED_AUTO = 0, +} sja1105_speed_t; + +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port); +int sja1105_clocking_setup(struct sja1105_private *priv); + +/* From sja1105_dynamic_config.c */ + +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry); +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep); + +/* Common implementations for the static and dynamic configs */ +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op); + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c new file mode 100644 index 000000000000..598544297931 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -0,0 +1,598 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include <linux/packing.h> +#include "sja1105.h" + +#define SJA1105_SIZE_CGU_CMD 4 + +struct sja1105_cfg_pad_mii_tx { + u64 d32_os; + u64 d32_ipud; + u64 d10_os; + u64 d10_ipud; + u64 ctrl_os; + u64 ctrl_ipud; + u64 clk_os; + u64 clk_ih; + u64 clk_ipud; +}; + +/* UM10944 Table 82. + * IDIV_0_C to IDIV_4_C control registers + * (addr. 10000Bh to 10000Fh) + */ +struct sja1105_cgu_idiv { + u64 clksrc; + u64 autoblock; + u64 idiv; + u64 pd; +}; + +/* PLL_1_C control register + * + * SJA1105 E/T: UM10944 Table 81 (address 10000Ah) + * SJA1105 P/Q/R/S: UM11040 Table 116 (address 10000Ah) + */ +struct sja1105_cgu_pll_ctrl { + u64 pllclksrc; + u64 msel; + u64 autoblock; + u64 psel; + u64 direct; + u64 fbsel; + u64 bypass; + u64 pd; +}; + +enum { + CLKSRC_MII0_TX_CLK = 0x00, + CLKSRC_MII0_RX_CLK = 0x01, + CLKSRC_MII1_TX_CLK = 0x02, + CLKSRC_MII1_RX_CLK = 0x03, + CLKSRC_MII2_TX_CLK = 0x04, + CLKSRC_MII2_RX_CLK = 0x05, + CLKSRC_MII3_TX_CLK = 0x06, + CLKSRC_MII3_RX_CLK = 0x07, + CLKSRC_MII4_TX_CLK = 0x08, + CLKSRC_MII4_RX_CLK = 0x09, + CLKSRC_PLL0 = 0x0B, + CLKSRC_PLL1 = 0x0E, + CLKSRC_IDIV0 = 0x11, + CLKSRC_IDIV1 = 0x12, + CLKSRC_IDIV2 = 0x13, + CLKSRC_IDIV3 = 0x14, + CLKSRC_IDIV4 = 0x15, +}; + +/* UM10944 Table 83. + * MIIx clock control registers 1 to 30 + * (addresses 100013h to 100035h) + */ +struct sja1105_cgu_mii_ctrl { + u64 clksrc; + u64 autoblock; + u64 pd; +}; + +static void sja1105_cgu_idiv_packing(void *buf, struct sja1105_cgu_idiv *idiv, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &idiv->clksrc, 28, 24, size, op); + sja1105_packing(buf, &idiv->autoblock, 11, 11, size, op); + sja1105_packing(buf, &idiv->idiv, 5, 2, size, op); + sja1105_packing(buf, &idiv->pd, 0, 0, size, op); +} + +static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port, + bool enabled, int factor) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + struct sja1105_cgu_idiv idiv; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + if (enabled && factor != 1 && factor != 10) { + dev_err(dev, "idiv factor must be 1 or 10\n"); + return -ERANGE; + } + + /* Payload for packed_buf */ + idiv.clksrc = 0x0A; /* 25MHz */ + idiv.autoblock = 1; /* Block clk automatically */ + idiv.idiv = factor - 1; /* Divide by 1 or 10 */ + idiv.pd = enabled ? 0 : 1; /* Power down? */ + sja1105_cgu_idiv_packing(packed_buf, &idiv, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->cgu_idiv[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static void +sja1105_cgu_mii_control_packing(void *buf, struct sja1105_cgu_mii_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->clksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_mii_role_t role) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_tx_clk; + const int mac_clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + const int phy_clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (role == XMII_MAC) + clksrc = mac_clk_sources[port]; + else + clksrc = phy_clk_sources[port]; + + /* Payload for packed_buf */ + mii_tx_clk.clksrc = clksrc; + mii_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_tx_clk[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_RX_CLK, + CLKSRC_MII1_RX_CLK, + CLKSRC_MII2_RX_CLK, + CLKSRC_MII3_RX_CLK, + CLKSRC_MII4_RX_CLK, + }; + + /* Payload for packed_buf */ + mii_rx_clk.clksrc = clk_sources[port]; + mii_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_rx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_rx_clk[port], packed_buf, + SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + /* Payload for packed_buf */ + mii_ext_tx_clk.clksrc = clk_sources[port]; + mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl mii_ext_rx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_IDIV0, + CLKSRC_IDIV1, + CLKSRC_IDIV2, + CLKSRC_IDIV3, + CLKSRC_IDIV4, + }; + + /* Payload for packed_buf */ + mii_ext_rx_clk.clksrc = clk_sources[port]; + mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + mii_ext_rx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &mii_ext_rx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->mii_ext_rx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_mii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring MII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* If role is MAC, disable IDIV + * If role is PHY, enable IDIV and configure for 1/1 divider + */ + rc = sja1105_cgu_idiv_config(priv, port, (role == XMII_PHY), 1); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_TX_CLK_n + * * If role is MAC, select TX_CLK_n + * * If role is PHY, select IDIV_n + */ + rc = sja1105_cgu_mii_tx_clk_config(priv, port, role); + if (rc < 0) + return rc; + + /* Configure CLKSRC of MII_RX_CLK_n + * Select RX_CLK_n + */ + rc = sja1105_cgu_mii_rx_clk_config(priv, port); + if (rc < 0) + return rc; + + if (role == XMII_PHY) { + /* Per MII spec, the PHY (which is us) drives the TX_CLK pin */ + + /* Configure CLKSRC of EXT_TX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + + /* Configure CLKSRC of EXT_RX_CLK_n + * Select IDIV_n + */ + rc = sja1105_cgu_mii_ext_rx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +static void +sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->pllclksrc, 28, 24, size, op); + sja1105_packing(buf, &cmd->msel, 23, 16, size, op); + sja1105_packing(buf, &cmd->autoblock, 11, 11, size, op); + sja1105_packing(buf, &cmd->psel, 9, 8, size, op); + sja1105_packing(buf, &cmd->direct, 7, 7, size, op); + sja1105_packing(buf, &cmd->fbsel, 6, 6, size, op); + sja1105_packing(buf, &cmd->bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->pd, 0, 0, size, op); +} + +static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv, + int port, sja1105_speed_t speed) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl txc; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + int clksrc; + + if (speed == SJA1105_SPEED_1000MBPS) { + clksrc = CLKSRC_PLL0; + } else { + int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, + CLKSRC_IDIV3, CLKSRC_IDIV4}; + clksrc = clk_sources[port]; + } + + /* RGMII: 125MHz for 1000, 25MHz for 100, 2.5MHz for 10 */ + txc.clksrc = clksrc; + /* Autoblock clk while changing clksrc */ + txc.autoblock = 1; + /* Power Down off => enabled */ + txc.pd = 0; + sja1105_cgu_mii_control_packing(packed_buf, &txc, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rgmii_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +/* AGU */ +static void +sja1105_cfg_pad_mii_tx_packing(void *buf, struct sja1105_cfg_pad_mii_tx *cmd, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &cmd->d32_os, 28, 27, size, op); + sja1105_packing(buf, &cmd->d32_ipud, 25, 24, size, op); + sja1105_packing(buf, &cmd->d10_os, 20, 19, size, op); + sja1105_packing(buf, &cmd->d10_ipud, 17, 16, size, op); + sja1105_packing(buf, &cmd->ctrl_os, 12, 11, size, op); + sja1105_packing(buf, &cmd->ctrl_ipud, 9, 8, size, op); + sja1105_packing(buf, &cmd->clk_os, 4, 3, size, op); + sja1105_packing(buf, &cmd->clk_ih, 2, 2, size, op); + sja1105_packing(buf, &cmd->clk_ipud, 1, 0, size, op); +} + +static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_tx pad_mii_tx; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + /* Payload */ + pad_mii_tx.d32_os = 3; /* TXD[3:2] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d10_os = 3; /* TXD[1:0] output stage: */ + /* high noise/high speed */ + pad_mii_tx.d32_ipud = 2; /* TXD[3:2] input stage: */ + /* plain input (default) */ + pad_mii_tx.d10_ipud = 2; /* TXD[1:0] input stage: */ + /* plain input (default) */ + pad_mii_tx.ctrl_os = 3; /* TX_CTL / TX_ER output stage */ + pad_mii_tx.ctrl_ipud = 2; /* TX_CTL / TX_ER input stage (default) */ + pad_mii_tx.clk_os = 3; /* TX_CLK output stage */ + pad_mii_tx.clk_ih = 0; /* TX_CLK input hysteresis (default) */ + pad_mii_tx.clk_ipud = 2; /* TX_CLK input stage (default) */ + sja1105_cfg_pad_mii_tx_packing(packed_buf, &pad_mii_tx, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rgmii_pad_mii_tx[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port) +{ + struct device *dev = priv->ds->dev; + struct sja1105_mac_config_entry *mac; + sja1105_speed_t speed; + int rc; + + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + speed = mac[port].speed; + + dev_dbg(dev, "Configuring port %d RGMII at speed %dMbps\n", + port, speed); + + switch (speed) { + case SJA1105_SPEED_1000MBPS: + /* 1000Mbps, IDIV disabled (125 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + break; + case SJA1105_SPEED_100MBPS: + /* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 1); + break; + case SJA1105_SPEED_10MBPS: + /* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */ + rc = sja1105_cgu_idiv_config(priv, port, true, 10); + break; + case SJA1105_SPEED_AUTO: + /* Skip CGU configuration if there is no speed available + * (e.g. link is not established yet) + */ + dev_dbg(dev, "Speed not available, skipping CGU config\n"); + return 0; + default: + rc = -EINVAL; + } + + if (rc < 0) { + dev_err(dev, "Failed to configure idiv\n"); + return rc; + } + rc = sja1105_cgu_rgmii_tx_clk_config(priv, port, speed); + if (rc < 0) { + dev_err(dev, "Failed to configure RGMII Tx clock\n"); + return rc; + } + rc = sja1105_rgmii_cfg_pad_tx_config(priv, port); + if (rc < 0) { + dev_err(dev, "Failed to configure Tx pad registers\n"); + return rc; + } + return 0; +} + +static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, + int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ref_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + const int clk_sources[] = { + CLKSRC_MII0_TX_CLK, + CLKSRC_MII1_TX_CLK, + CLKSRC_MII2_TX_CLK, + CLKSRC_MII3_TX_CLK, + CLKSRC_MII4_TX_CLK, + }; + + /* Payload for packed_buf */ + ref_clk.clksrc = clk_sources[port]; + ref_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ref_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ref_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rmii_ref_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int +sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port) +{ + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cgu_mii_ctrl ext_tx_clk; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + /* Payload for packed_buf */ + ext_tx_clk.clksrc = CLKSRC_PLL1; + ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ + ext_tx_clk.pd = 0; /* Power Down off => enabled */ + sja1105_cgu_mii_control_packing(packed_buf, &ext_tx_clk, PACK); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, + regs->rmii_ext_tx_clk[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + +static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1105_cgu_pll_ctrl pll = {0}; + struct device *dev = priv->ds->dev; + int rc; + + /* PLL1 must be enabled and output 50 Mhz. + * This is done by writing first 0x0A010941 to + * the PLL_1_C register and then deasserting + * power down (PD) 0x0A010940. + */ + + /* Step 1: PLL1 setup for 50Mhz */ + pll.pllclksrc = 0xA; + pll.msel = 0x1; + pll.autoblock = 0x1; + pll.psel = 0x1; + pll.direct = 0x0; + pll.fbsel = 0x1; + pll.bypass = 0x0; + pll.pd = 0x1; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to configure PLL1 for 50MHz\n"); + return rc; + } + + /* Step 2: Enable PLL1 */ + pll.pd = 0x0; + + sja1105_cgu_pll_control_packing(packed_buf, &pll, PACK); + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rmii_pll1, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc < 0) { + dev_err(dev, "failed to enable PLL1\n"); + return rc; + } + return rc; +} + +static int sja1105_rmii_clocking_setup(struct sja1105_private *priv, int port, + sja1105_mii_role_t role) +{ + struct device *dev = priv->ds->dev; + int rc; + + dev_dbg(dev, "Configuring RMII-%s clocking\n", + (role == XMII_MAC) ? "MAC" : "PHY"); + /* AH1601.pdf chapter 2.5.1. Sources */ + if (role == XMII_MAC) { + /* Configure and enable PLL1 for 50Mhz output */ + rc = sja1105_cgu_rmii_pll_config(priv); + if (rc < 0) + return rc; + } + /* Disable IDIV for this port */ + rc = sja1105_cgu_idiv_config(priv, port, false, 1); + if (rc < 0) + return rc; + /* Source to sink mappings */ + rc = sja1105_cgu_rmii_ref_clk_config(priv, port); + if (rc < 0) + return rc; + if (role == XMII_MAC) { + rc = sja1105_cgu_rmii_ext_tx_clk_config(priv, port); + if (rc < 0) + return rc; + } + return 0; +} + +int sja1105_clocking_setup_port(struct sja1105_private *priv, int port) +{ + struct sja1105_xmii_params_entry *mii; + struct device *dev = priv->ds->dev; + sja1105_phy_interface_t phy_mode; + sja1105_mii_role_t role; + int rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + + /* RGMII etc */ + phy_mode = mii->xmii_mode[port]; + /* MAC or PHY, for applicable types (not RGMII) */ + role = mii->phy_mac[port]; + + switch (phy_mode) { + case XMII_MODE_MII: + rc = sja1105_mii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RMII: + rc = sja1105_rmii_clocking_setup(priv, port, role); + break; + case XMII_MODE_RGMII: + rc = sja1105_rgmii_clocking_setup(priv, port); + break; + default: + dev_err(dev, "Invalid interface mode specified: %d\n", + phy_mode); + return -EINVAL; + } + if (rc) + dev_err(dev, "Clocking setup for port %d failed: %d\n", + port, rc); + return rc; +} + +int sja1105_clocking_setup(struct sja1105_private *priv) +{ + int port, rc; + + for (port = 0; port < SJA1105_NUM_PORTS; port++) { + rc = sja1105_clocking_setup_port(priv, port); + if (rc < 0) + return rc; + } + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.c b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c new file mode 100644 index 000000000000..d8f145488063 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.c @@ -0,0 +1,489 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105.h" + +#define SJA1105_SIZE_DYN_CMD 4 + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105PQRS_SIZE_L2_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY) + +#define SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + 4 + SJA1105_SIZE_VLAN_LOOKUP_ENTRY) + +#define SJA1105_SIZE_L2_FORWARDING_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105_SIZE_L2_FORWARDING_ENTRY) + +#define SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY) + +#define SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD \ + (SJA1105_SIZE_DYN_CMD + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY) + +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD \ + SJA1105_SIZE_DYN_CMD + +#define SJA1105_MAX_DYN_CMD_SIZE \ + SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD + +static void +sja1105pqrs_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - The hardware takes the 'index' field within + * struct sja1105_l2_lookup_entry as the index on which this command + * will operate. However it will ignore everything else, so 'index' + * is logically part of command but physically part of entry. + * Populate the 'index' entry field from within the command callback, + * such that our API doesn't need to ask for a full-blown entry + * structure when e.g. a delete is requested. + */ + sja1105_packing(buf, &cmd->index, 29, 20, + SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, op); + /* TODO hostcmd */ +} + +static void +sja1105et_l2_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->errors, 29, 29, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above. */ + sja1105_packing(buf, &cmd->index, 29, 20, + SJA1105ET_SIZE_L2_LOOKUP_ENTRY, op); +} + +static void +sja1105et_mgmt_route_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + u64 mgmtroute = 1; + + sja1105et_l2_lookup_cmd_packing(buf, cmd, op); + if (op == PACK) + sja1105_pack(p, &mgmtroute, 26, 26, SJA1105_SIZE_DYN_CMD); +} + +static size_t sja1105et_mgmt_route_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_mgmt_entry *entry = entry_ptr; + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + + /* UM10944: To specify if a PTP egress timestamp shall be captured on + * each port upon transmission of the frame, the LSB of VLANID in the + * ENTRY field provided by the host must be set. + * Bit 1 of VLANID then specifies the register where the timestamp for + * this port is stored in. + */ + sja1105_packing(buf, &entry->tsreg, 85, 85, size, op); + sja1105_packing(buf, &entry->takets, 84, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + return size; +} + +/* In E/T, entry is at addresses 0x27-0x28. There is a 4 byte gap at 0x29, + * and command is at 0x2a. Similarly in P/Q/R/S there is a 1 register gap + * between entry (0x2d, 0x2e) and command (0x30). + */ +static void +sja1105_vlan_lookup_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_VLAN_LOOKUP_ENTRY + 4; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->rdwrset, 30, 30, size, op); + sja1105_packing(p, &cmd->valident, 27, 27, size, op); + /* Hack - see comments above, applied for 'vlanid' field of + * struct sja1105_vlan_lookup_entry. + */ + sja1105_packing(buf, &cmd->index, 38, 27, + SJA1105_SIZE_VLAN_LOOKUP_ENTRY, op); +} + +static void +sja1105_l2_forwarding_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + u8 *p = buf + SJA1105_SIZE_L2_FORWARDING_ENTRY; + const int size = SJA1105_SIZE_DYN_CMD; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 4, 0, size, op); +} + +static void +sja1105et_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_DYN_CMD; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + + sja1105_packing(reg1, &cmd->valid, 31, 31, size, op); + sja1105_packing(reg1, &cmd->index, 26, 24, size, op); +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + /* Yup, user manual definitions are reversed */ + u8 *reg1 = buf + 4; + u8 *reg2 = buf; + + sja1105_packing(reg1, &entry->speed, 30, 29, size, op); + sja1105_packing(reg1, &entry->drpdtag, 23, 23, size, op); + sja1105_packing(reg1, &entry->drpuntag, 22, 22, size, op); + sja1105_packing(reg1, &entry->retag, 21, 21, size, op); + sja1105_packing(reg1, &entry->dyn_learn, 20, 20, size, op); + sja1105_packing(reg1, &entry->egress, 19, 19, size, op); + sja1105_packing(reg1, &entry->ingress, 18, 18, size, op); + sja1105_packing(reg1, &entry->ing_mirr, 17, 17, size, op); + sja1105_packing(reg1, &entry->egr_mirr, 16, 16, size, op); + sja1105_packing(reg1, &entry->vlanprio, 14, 12, size, op); + sja1105_packing(reg1, &entry->vlanid, 11, 0, size, op); + sja1105_packing(reg2, &entry->tp_delin, 31, 16, size, op); + sja1105_packing(reg2, &entry->tp_delout, 15, 0, size, op); + /* MAC configuration table entries which can't be reconfigured: + * top, base, enabled, ifg, maxage, drpnona664 + */ + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105pqrs_mac_config_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_MAC_CONFIG_DYN_ENTRY; + u8 *p = buf + SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + + sja1105_packing(p, &cmd->valid, 31, 31, size, op); + sja1105_packing(p, &cmd->errors, 30, 30, size, op); + sja1105_packing(p, &cmd->rdwrset, 29, 29, size, op); + sja1105_packing(p, &cmd->index, 2, 0, size, op); +} + +static void +sja1105et_l2_lookup_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + sja1105_packing(buf, &cmd->valid, 31, 31, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->poly, 7, 0, + SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +static void +sja1105et_general_params_cmd_packing(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op) +{ + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &cmd->valid, 31, 31, size, op); + sja1105_packing(buf, &cmd->errors, 30, 30, size, op); +} + +static size_t +sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + struct sja1105_general_params_entry *entry = entry_ptr; + const int size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD; + + sja1105_packing(buf, &entry->mirr_port, 2, 0, size, op); + /* Bogus return value, not used anywhere */ + return 0; +} + +#define OP_READ BIT(0) +#define OP_WRITE BIT(1) +#define OP_DEL BIT(2) + +/* SJA1105E/T: First generation */ +struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105et_l2_lookup_entry_packing, + .cmd_packing = sja1105et_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_MGMT_ROUTE] = { + .entry_packing = sja1105et_mgmt_route_entry_packing, + .cmd_packing = sja1105et_mgmt_route_cmd_packing, + .access = (OP_READ | OP_WRITE), + .max_entry_count = SJA1105_NUM_PORTS, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x20, + }, + [BLK_IDX_L2_POLICING] = {0}, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x27, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105et_mac_config_entry_packing, + .cmd_packing = sja1105et_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x36, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105et_l2_lookup_params_entry_packing, + .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105et_general_params_entry_packing, + .cmd_packing = sja1105et_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x34, + }, + [BLK_IDX_XMII_PARAMS] = {0}, +}; + +/* SJA1105P/Q/R/S: Second generation: TODO */ +struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN] = { + [BLK_IDX_L2_LOOKUP] = { + .entry_packing = sja1105pqrs_l2_lookup_entry_packing, + .cmd_packing = sja1105pqrs_l2_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_DYN_CMD, + .addr = 0x24, + }, + [BLK_IDX_L2_POLICING] = {0}, + [BLK_IDX_VLAN_LOOKUP] = { + .entry_packing = sja1105_vlan_lookup_entry_packing, + .cmd_packing = sja1105_vlan_lookup_cmd_packing, + .access = (OP_READ | OP_WRITE | OP_DEL), + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + .packed_size = SJA1105_SIZE_VLAN_LOOKUP_DYN_CMD, + .addr = 0x2D, + }, + [BLK_IDX_L2_FORWARDING] = { + .entry_packing = sja1105_l2_forwarding_entry_packing, + .cmd_packing = sja1105_l2_forwarding_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105_SIZE_L2_FORWARDING_DYN_CMD, + .addr = 0x2A, + }, + [BLK_IDX_MAC_CONFIG] = { + .entry_packing = sja1105pqrs_mac_config_entry_packing, + .cmd_packing = sja1105pqrs_mac_config_cmd_packing, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105PQRS_SIZE_MAC_CONFIG_DYN_CMD, + .addr = 0x4B, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .entry_packing = sja1105et_l2_lookup_params_entry_packing, + .cmd_packing = sja1105et_l2_lookup_params_cmd_packing, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + .access = (OP_READ | OP_WRITE), + .packed_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_DYN_CMD, + .addr = 0x38, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = {0}, + [BLK_IDX_GENERAL_PARAMS] = { + .entry_packing = sja1105et_general_params_entry_packing, + .cmd_packing = sja1105et_general_params_cmd_packing, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + .access = OP_WRITE, + .packed_size = SJA1105ET_SIZE_GENERAL_PARAMS_DYN_CMD, + .addr = 0x34, + }, + [BLK_IDX_XMII_PARAMS] = {0}, +}; + +int sja1105_dynamic_config_read(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int retries = 3; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= ops->max_entry_count) + return -ERANGE; + if (!(ops->access & OP_READ)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + if (!ops->cmd_packing) + return -EOPNOTSUPP; + if (!ops->entry_packing) + return -EOPNOTSUPP; + + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_READ; /* Action is read */ + cmd.index = index; + ops->cmd_packing(packed_buf, &cmd, PACK); + + /* Send SPI write operation: read config table entry */ + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + /* Loop until we have confirmation that hardware has finished + * processing the command and has cleared the VALID field + */ + do { + memset(packed_buf, 0, ops->packed_size); + + /* Retrieve the read operation's result */ + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + cmd = (struct sja1105_dyn_cmd) {0}; + ops->cmd_packing(packed_buf, &cmd, UNPACK); + /* UM10944: [valident] will always be found cleared + * during a read access with MGMTROUTE set. + * So don't error out in that case. + */ + if (!cmd.valident && blk_idx != BLK_IDX_MGMT_ROUTE) + return -EINVAL; + cpu_relax(); + } while (cmd.valid && --retries); + + if (cmd.valid) + return -ETIMEDOUT; + + /* Don't dereference possibly NULL pointer - maybe caller + * only wanted to see whether the entry existed or not. + */ + if (entry) + ops->entry_packing(packed_buf, entry, UNPACK); + return 0; +} + +int sja1105_dynamic_config_write(struct sja1105_private *priv, + enum sja1105_blk_idx blk_idx, + int index, void *entry, bool keep) +{ + const struct sja1105_dynamic_table_ops *ops; + struct sja1105_dyn_cmd cmd = {0}; + /* SPI payload buffer */ + u8 packed_buf[SJA1105_MAX_DYN_CMD_SIZE] = {0}; + int rc; + + if (blk_idx >= BLK_IDX_MAX_DYN) + return -ERANGE; + + ops = &priv->info->dyn_ops[blk_idx]; + + if (index >= ops->max_entry_count) + return -ERANGE; + if (!(ops->access & OP_WRITE)) + return -EOPNOTSUPP; + if (!keep && !(ops->access & OP_DEL)) + return -EOPNOTSUPP; + if (ops->packed_size > SJA1105_MAX_DYN_CMD_SIZE) + return -ERANGE; + + cmd.valident = keep; /* If false, deletes entry */ + cmd.valid = true; /* Trigger action on table entry */ + cmd.rdwrset = SPI_WRITE; /* Action is write */ + cmd.index = index; + + if (!ops->cmd_packing) + return -EOPNOTSUPP; + ops->cmd_packing(packed_buf, &cmd, PACK); + + if (!ops->entry_packing) + return -EOPNOTSUPP; + /* Don't dereference potentially NULL pointer if just + * deleting a table entry is what was requested. For cases + * where 'index' field is physically part of entry structure, + * and needed here, we deal with that in the cmd_packing callback. + */ + if (keep) + ops->entry_packing(packed_buf, entry, PACK); + + /* Send SPI write operation: read config table entry */ + rc = sja1105_spi_send_packed_buf(priv, SPI_WRITE, ops->addr, + packed_buf, ops->packed_size); + if (rc < 0) + return rc; + + cmd = (struct sja1105_dyn_cmd) {0}; + ops->cmd_packing(packed_buf, &cmd, UNPACK); + if (cmd.errors) + return -EINVAL; + + return 0; +} diff --git a/drivers/net/dsa/sja1105/sja1105_dynamic_config.h b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h new file mode 100644 index 000000000000..77be59546a55 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_dynamic_config.h @@ -0,0 +1,43 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_DYNAMIC_CONFIG_H +#define _SJA1105_DYNAMIC_CONFIG_H + +#include "sja1105.h" +#include <linux/packing.h> + +struct sja1105_dyn_cmd { + u64 valid; + u64 rdwrset; + u64 errors; + u64 valident; + u64 index; +}; + +struct sja1105_dynamic_table_ops { + /* This returns size_t just to keep same prototype as the + * static config ops, of which we are reusing some functions. + */ + size_t (*entry_packing)(void *buf, void *entry_ptr, enum packing_op op); + void (*cmd_packing)(void *buf, struct sja1105_dyn_cmd *cmd, + enum packing_op op); + size_t max_entry_count; + size_t packed_size; + u64 addr; + u8 access; +}; + +struct sja1105_mgmt_entry { + u64 tsreg; + u64 takets; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; +}; + +extern struct sja1105_dynamic_table_ops sja1105et_dyn_ops[BLK_IDX_MAX_DYN]; +extern struct sja1105_dynamic_table_ops sja1105pqrs_dyn_ops[BLK_IDX_MAX_DYN]; + +#endif diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c new file mode 100644 index 000000000000..7d2ad2db0d88 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -0,0 +1,928 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/printk.h> +#include <linux/spi/spi.h> +#include <linux/errno.h> +#include <linux/gpio/consumer.h> +#include <linux/of.h> +#include <linux/of_net.h> +#include <linux/of_mdio.h> +#include <linux/of_device.h> +#include <linux/netdev_features.h> +#include <linux/netdevice.h> +#include <linux/if_bridge.h> +#include <linux/if_ether.h> +#include "sja1105.h" + +static void sja1105_hw_reset(struct gpio_desc *gpio, unsigned int pulse_len, + unsigned int startup_delay) +{ + gpiod_set_value_cansleep(gpio, 1); + /* Wait for minimum reset pulse length */ + msleep(pulse_len); + gpiod_set_value_cansleep(gpio, 0); + /* Wait until chip is ready after reset */ + msleep(startup_delay); +} + +static void +sja1105_port_allow_traffic(struct sja1105_l2_forwarding_entry *l2_fwd, + int from, int to, bool allow) +{ + if (allow) { + l2_fwd[from].bc_domain |= BIT(to); + l2_fwd[from].reach_port |= BIT(to); + l2_fwd[from].fl_domain |= BIT(to); + } else { + l2_fwd[from].bc_domain &= ~BIT(to); + l2_fwd[from].reach_port &= ~BIT(to); + l2_fwd[from].fl_domain &= ~BIT(to); + } +} + +/* Structure used to temporarily transport device tree + * settings into sja1105_setup + */ +struct sja1105_dt_port { + phy_interface_t phy_mode; + sja1105_mii_role_t role; +}; + +static int sja1105_init_mac_settings(struct sja1105_private *priv) +{ + struct sja1105_mac_config_entry default_mac = { + /* Enable all 8 priority queues on egress. + * Every queue i holds top[i] - base[i] frames. + * Sum of top[i] - base[i] is 511 (max hardware limit). + */ + .top = {0x3F, 0x7F, 0xBF, 0xFF, 0x13F, 0x17F, 0x1BF, 0x1FF}, + .base = {0x0, 0x40, 0x80, 0xC0, 0x100, 0x140, 0x180, 0x1C0}, + .enabled = {true, true, true, true, true, true, true, true}, + /* Keep standard IFG of 12 bytes on egress. */ + .ifg = 0, + /* Always put the MAC speed in automatic mode, where it can be + * retrieved from the PHY object through phylib and + * sja1105_adjust_port_config. + */ + .speed = SJA1105_SPEED_AUTO, + /* No static correction for 1-step 1588 events */ + .tp_delin = 0, + .tp_delout = 0, + /* Disable aging for critical TTEthernet traffic */ + .maxage = 0xFF, + /* Internal VLAN (pvid) to apply to untagged ingress */ + .vlanprio = 0, + .vlanid = 0, + .ing_mirr = false, + .egr_mirr = false, + /* Don't drop traffic with other EtherType than ETH_P_IP */ + .drpnona664 = false, + /* Don't drop double-tagged traffic */ + .drpdtag = false, + /* Don't drop untagged traffic */ + .drpuntag = false, + /* Don't retag 802.1p (VID 0) traffic with the pvid */ + .retag = false, + /* Enable learning and I/O on user ports by default. */ + .dyn_learn = true, + .egress = false, + .ingress = false, + }; + struct sja1105_mac_config_entry *mac; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_MAC_CONFIG]; + + /* Discard previous MAC Configuration Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_NUM_PORTS, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + /* Override table based on phylib DT bindings */ + table->entry_count = SJA1105_NUM_PORTS; + + mac = table->entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) + mac[i] = default_mac; + + return 0; +} + +static int sja1105_init_mii_settings(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + struct device *dev = &priv->spidev->dev; + struct sja1105_xmii_params_entry *mii; + struct sja1105_table *table; + int i; + + table = &priv->static_config.tables[BLK_IDX_XMII_PARAMS]; + + /* Discard previous xMII Mode Parameters Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_XMII_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + /* Override table based on phylib DT bindings */ + table->entry_count = SJA1105_MAX_XMII_PARAMS_COUNT; + + mii = table->entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + switch (ports[i].phy_mode) { + case PHY_INTERFACE_MODE_MII: + mii->xmii_mode[i] = XMII_MODE_MII; + break; + case PHY_INTERFACE_MODE_RMII: + mii->xmii_mode[i] = XMII_MODE_RMII; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + mii->xmii_mode[i] = XMII_MODE_RGMII; + break; + default: + dev_err(dev, "Unsupported PHY mode %s!\n", + phy_modes(ports[i].phy_mode)); + } + + mii->phy_mac[i] = ports[i].role; + } + return 0; +} + +static int sja1105_init_static_fdb(struct sja1105_private *priv) +{ + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + return 0; +} + +static int sja1105_init_l2_lookup_params(struct sja1105_private *priv) +{ + struct sja1105_table *table; + struct sja1105_l2_lookup_params_entry default_l2_lookup_params = { + /* TODO Learned FDB entries are never forgotten */ + .maxage = 0, + /* All entries within a FDB bin are available for learning */ + .dyn_tbsz = SJA1105ET_FDB_BIN_SIZE, + /* 2^8 + 2^5 + 2^3 + 2^2 + 2^1 + 1 in Koopman notation */ + .poly = 0x97, + /* This selects between Independent VLAN Learning (IVL) and + * Shared VLAN Learning (SVL) + */ + .shared_learn = false, + /* Don't discard management traffic based on ENFPORT - + * we don't perform SMAC port enforcement anyway, so + * what we are setting here doesn't matter. + */ + .no_enf_hostprt = false, + /* Don't learn SMAC for mac_fltres1 and mac_fltres0. + * Maybe correlate with no_linklocal_learn from bridge driver? + */ + .no_mgmt_learn = true, + }; + + table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_l2_lookup_params_entry *)table->entries)[0] = + default_l2_lookup_params; + + return 0; +} + +static int sja1105_init_static_vlan(struct sja1105_private *priv) +{ + struct sja1105_table *table; + struct sja1105_vlan_lookup_entry pvid = { + .ving_mirr = 0, + .vegr_mirr = 0, + .vmemb_port = 0, + .vlan_bc = 0, + .tag_port = 0, + .vlanid = 0, + }; + int i; + + table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; + + /* The static VLAN table will only contain the initial pvid of 0. + */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(1, table->ops->unpacked_entry_size, + GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = 1; + + /* VLAN ID 0: all DT-defined ports are members; no restrictions on + * forwarding; always transmit priority-tagged frames as untagged. + */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + pvid.vmemb_port |= BIT(i); + pvid.vlan_bc |= BIT(i); + pvid.tag_port &= ~BIT(i); + } + + ((struct sja1105_vlan_lookup_entry *)table->entries)[0] = pvid; + return 0; +} + +static int sja1105_init_l2_forwarding(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_entry *l2fwd; + struct sja1105_table *table; + int i, j; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_COUNT; + + l2fwd = table->entries; + + /* First 5 entries define the forwarding rules */ + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + unsigned int upstream = dsa_upstream_port(priv->ds, i); + + for (j = 0; j < SJA1105_NUM_TC; j++) + l2fwd[i].vlan_pmap[j] = j; + + if (i == upstream) + continue; + + sja1105_port_allow_traffic(l2fwd, i, upstream, true); + sja1105_port_allow_traffic(l2fwd, upstream, i, true); + } + /* Next 8 entries define VLAN PCP mapping from ingress to egress. + * Create a one-to-one mapping. + */ + for (i = 0; i < SJA1105_NUM_TC; i++) + for (j = 0; j < SJA1105_NUM_PORTS; j++) + l2fwd[SJA1105_NUM_PORTS + i].vlan_pmap[j] = i; + + return 0; +} + +static int sja1105_init_l2_forwarding_params(struct sja1105_private *priv) +{ + struct sja1105_l2_forwarding_params_entry default_l2fwd_params = { + /* Disallow dynamic reconfiguration of vlan_pmap */ + .max_dynp = 0, + /* Use a single memory partition for all ingress queues */ + .part_spc = { SJA1105_MAX_FRAME_MEMORY, 0, 0, 0, 0, 0, 0, 0 }, + }; + struct sja1105_table *table; + + table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_l2_forwarding_params_entry *)table->entries)[0] = + default_l2fwd_params; + + return 0; +} + +static int sja1105_init_general_params(struct sja1105_private *priv) +{ + struct sja1105_general_params_entry default_general_params = { + /* Disallow dynamic changing of the mirror port */ + .mirr_ptacu = 0, + .switchid = priv->ds->index, + /* Priority queue for link-local frames trapped to CPU */ + .hostprio = 0, + .mac_fltres1 = SJA1105_LINKLOCAL_FILTER_A, + .mac_flt1 = SJA1105_LINKLOCAL_FILTER_A_MASK, + .incl_srcpt1 = true, + .send_meta1 = false, + .mac_fltres0 = SJA1105_LINKLOCAL_FILTER_B, + .mac_flt0 = SJA1105_LINKLOCAL_FILTER_B_MASK, + .incl_srcpt0 = true, + .send_meta0 = false, + /* The destination for traffic matching mac_fltres1 and + * mac_fltres0 on all ports except host_port. Such traffic + * receieved on host_port itself would be dropped, except + * by installing a temporary 'management route' + */ + .host_port = dsa_upstream_port(priv->ds, 0), + /* Same as host port */ + .mirr_port = dsa_upstream_port(priv->ds, 0), + /* Link-local traffic received on casc_port will be forwarded + * to host_port without embedding the source port and device ID + * info in the destination MAC address (presumably because it + * is a cascaded port and a downstream SJA switch already did + * that). Default to an invalid port (to disable the feature) + * and overwrite this if we find any DSA (cascaded) ports. + */ + .casc_port = SJA1105_NUM_PORTS, + /* No TTEthernet */ + .vllupformat = 0, + .vlmarker = 0, + .vlmask = 0, + /* Only update correctionField for 1-step PTP (L2 transport) */ + .ignore2stf = 0, + .tpid = ETH_P_8021Q, + .tpid2 = ETH_P_8021Q, + }; + struct sja1105_table *table; + int i; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) + if (dsa_is_dsa_port(priv->ds, i)) + default_general_params.casc_port = i; + + table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; + + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_GENERAL_PARAMS_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT; + + /* This table only has a single entry */ + ((struct sja1105_general_params_entry *)table->entries)[0] = + default_general_params; + + return 0; +} + +#define SJA1105_RATE_MBPS(speed) (((speed) * 64000) / 1000) + +static inline void +sja1105_setup_policer(struct sja1105_l2_policing_entry *policing, + int index) +{ + policing[index].sharindx = index; + policing[index].smax = 65535; /* Burst size in bytes */ + policing[index].rate = SJA1105_RATE_MBPS(1000); + policing[index].maxlen = ETH_FRAME_LEN + VLAN_HLEN + ETH_FCS_LEN; + policing[index].partition = 0; +} + +static int sja1105_init_l2_policing(struct sja1105_private *priv) +{ + struct sja1105_l2_policing_entry *policing; + struct sja1105_table *table; + int i, j, k; + + table = &priv->static_config.tables[BLK_IDX_L2_POLICING]; + + /* Discard previous L2 Policing Table */ + if (table->entry_count) { + kfree(table->entries); + table->entry_count = 0; + } + + table->entries = kcalloc(SJA1105_MAX_L2_POLICING_COUNT, + table->ops->unpacked_entry_size, GFP_KERNEL); + if (!table->entries) + return -ENOMEM; + + table->entry_count = SJA1105_MAX_L2_POLICING_COUNT; + + policing = table->entries; + + /* k sweeps through all unicast policers (0-39). + * bcast sweeps through policers 40-44. + */ + for (i = 0, k = 0; i < SJA1105_NUM_PORTS; i++) { + int bcast = (SJA1105_NUM_PORTS * SJA1105_NUM_TC) + i; + + for (j = 0; j < SJA1105_NUM_TC; j++, k++) + sja1105_setup_policer(policing, k); + + /* Set up this port's policer for broadcast traffic */ + sja1105_setup_policer(policing, bcast); + } + return 0; +} + +static int sja1105_static_config_load(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + int rc; + + sja1105_static_config_free(&priv->static_config); + rc = sja1105_static_config_init(&priv->static_config, + priv->info->static_ops, + priv->info->device_id); + if (rc) + return rc; + + /* Build static configuration */ + rc = sja1105_init_mac_settings(priv); + if (rc < 0) + return rc; + rc = sja1105_init_mii_settings(priv, ports); + if (rc < 0) + return rc; + rc = sja1105_init_static_fdb(priv); + if (rc < 0) + return rc; + rc = sja1105_init_static_vlan(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_lookup_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_forwarding_params(priv); + if (rc < 0) + return rc; + rc = sja1105_init_l2_policing(priv); + if (rc < 0) + return rc; + rc = sja1105_init_general_params(priv); + if (rc < 0) + return rc; + + /* Send initial configuration to hardware via SPI */ + return sja1105_static_config_upload(priv); +} + +static int sja1105_parse_ports_node(struct sja1105_private *priv, + struct sja1105_dt_port *ports, + struct device_node *ports_node) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *child; + + for_each_child_of_node(ports_node, child) { + struct device_node *phy_node; + int phy_mode; + u32 index; + + /* Get switch port number from DT */ + if (of_property_read_u32(child, "reg", &index) < 0) { + dev_err(dev, "Port number not defined in device tree " + "(property \"reg\")\n"); + return -ENODEV; + } + + /* Get PHY mode from DT */ + phy_mode = of_get_phy_mode(child); + if (phy_mode < 0) { + dev_err(dev, "Failed to read phy-mode or " + "phy-interface-type property for port %d\n", + index); + return -ENODEV; + } + ports[index].phy_mode = phy_mode; + + phy_node = of_parse_phandle(child, "phy-handle", 0); + if (!phy_node) { + if (!of_phy_is_fixed_link(child)) { + dev_err(dev, "phy-handle or fixed-link " + "properties missing!\n"); + return -ENODEV; + } + /* phy-handle is missing, but fixed-link isn't. + * So it's a fixed link. Default to PHY role. + */ + ports[index].role = XMII_PHY; + } else { + /* phy-handle present => put port in MAC role */ + ports[index].role = XMII_MAC; + of_node_put(phy_node); + } + + /* The MAC/PHY role can be overridden with explicit bindings */ + if (of_property_read_bool(child, "sja1105,role-mac")) + ports[index].role = XMII_MAC; + else if (of_property_read_bool(child, "sja1105,role-phy")) + ports[index].role = XMII_PHY; + } + + return 0; +} + +static int sja1105_parse_dt(struct sja1105_private *priv, + struct sja1105_dt_port *ports) +{ + struct device *dev = &priv->spidev->dev; + struct device_node *switch_node = dev->of_node; + struct device_node *ports_node; + int rc; + + ports_node = of_get_child_by_name(switch_node, "ports"); + if (!ports_node) { + dev_err(dev, "Incorrect bindings: absent \"ports\" node\n"); + return -ENODEV; + } + + rc = sja1105_parse_ports_node(priv, ports, ports_node); + of_node_put(ports_node); + + return rc; +} + +/* Convert back and forth MAC speed from Mbps to SJA1105 encoding */ +static int sja1105_speed[] = { + [SJA1105_SPEED_AUTO] = 0, + [SJA1105_SPEED_10MBPS] = 10, + [SJA1105_SPEED_100MBPS] = 100, + [SJA1105_SPEED_1000MBPS] = 1000, +}; + +static sja1105_speed_t sja1105_get_speed_cfg(unsigned int speed_mbps) +{ + int i; + + for (i = SJA1105_SPEED_AUTO; i <= SJA1105_SPEED_1000MBPS; i++) + if (sja1105_speed[i] == speed_mbps) + return i; + return -EINVAL; +} + +/* Set link speed and enable/disable traffic I/O in the MAC configuration + * for a specific port. + * + * @speed_mbps: If 0, leave the speed unchanged, else adapt MAC to PHY speed. + * @enabled: Manage Rx and Tx settings for this port. Overrides the static + * configuration settings. + */ +static int sja1105_adjust_port_config(struct sja1105_private *priv, int port, + int speed_mbps, bool enabled) +{ + struct sja1105_xmii_params_entry *mii; + struct sja1105_mac_config_entry *mac; + struct device *dev = priv->ds->dev; + sja1105_phy_interface_t phy_mode; + sja1105_speed_t speed; + int rc; + + mii = priv->static_config.tables[BLK_IDX_XMII_PARAMS].entries; + mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; + + speed = sja1105_get_speed_cfg(speed_mbps); + if (speed_mbps && speed < 0) { + dev_err(dev, "Invalid speed %iMbps\n", speed_mbps); + return -EINVAL; + } + + /* If requested, overwrite SJA1105_SPEED_AUTO from the static MAC + * configuration table, since this will be used for the clocking setup, + * and we no longer need to store it in the static config (already told + * hardware we want auto during upload phase). + */ + if (speed_mbps) + mac[port].speed = speed; + else + mac[port].speed = SJA1105_SPEED_AUTO; + + /* On P/Q/R/S, one can read from the device via the MAC reconfiguration + * tables. On E/T, MAC reconfig tables are not readable, only writable. + * We have to *know* what the MAC looks like. For the sake of keeping + * the code common, we'll use the static configuration tables as a + * reasonable approximation for both E/T and P/Q/R/S. + */ + mac[port].ingress = enabled; + mac[port].egress = enabled; + + /* Write to the dynamic reconfiguration tables */ + rc = sja1105_dynamic_config_write(priv, BLK_IDX_MAC_CONFIG, + port, &mac[port], true); + if (rc < 0) { + dev_err(dev, "Failed to write MAC config: %d\n", rc); + return rc; + } + + /* Reconfigure the PLLs for the RGMII interfaces (required 125 MHz at + * gigabit, 25 MHz at 100 Mbps and 2.5 MHz at 10 Mbps). For MII and + * RMII no change of the clock setup is required. Actually, changing + * the clock setup does interrupt the clock signal for a certain time + * which causes trouble for all PHYs relying on this signal. + */ + if (!enabled) + return 0; + + phy_mode = mii->xmii_mode[port]; + if (phy_mode != XMII_MODE_RGMII) + return 0; + + return sja1105_clocking_setup_port(priv, port); +} + +static void sja1105_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct sja1105_private *priv = ds->priv; + + if (!phydev->link) + sja1105_adjust_port_config(priv, port, 0, false); + else + sja1105_adjust_port_config(priv, port, phydev->speed, true); +} + +static int sja1105_bridge_member(struct dsa_switch *ds, int port, + struct net_device *br, bool member) +{ + struct sja1105_l2_forwarding_entry *l2_fwd; + struct sja1105_private *priv = ds->priv; + int i, rc; + + l2_fwd = priv->static_config.tables[BLK_IDX_L2_FORWARDING].entries; + + for (i = 0; i < SJA1105_NUM_PORTS; i++) { + /* Add this port to the forwarding matrix of the + * other ports in the same bridge, and viceversa. + */ + if (!dsa_is_user_port(ds, i)) + continue; + /* For the ports already under the bridge, only one thing needs + * to be done, and that is to add this port to their + * reachability domain. So we can perform the SPI write for + * them immediately. However, for this port itself (the one + * that is new to the bridge), we need to add all other ports + * to its reachability domain. So we do that incrementally in + * this loop, and perform the SPI write only at the end, once + * the domain contains all other bridge ports. + */ + if (i == port) + continue; + if (dsa_to_port(ds, i)->bridge_dev != br) + continue; + sja1105_port_allow_traffic(l2_fwd, i, port, member); + sja1105_port_allow_traffic(l2_fwd, port, i, member); + + rc = sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + i, &l2_fwd[i], true); + if (rc < 0) + return rc; + } + + return sja1105_dynamic_config_write(priv, BLK_IDX_L2_FORWARDING, + port, &l2_fwd[port], true); +} + +static int sja1105_bridge_join(struct dsa_switch *ds, int port, + struct net_device *br) +{ + return sja1105_bridge_member(ds, port, br, true); +} + +static void sja1105_bridge_leave(struct dsa_switch *ds, int port, + struct net_device *br) +{ + sja1105_bridge_member(ds, port, br, false); +} + +static enum dsa_tag_protocol +sja1105_get_tag_protocol(struct dsa_switch *ds, int port) +{ + return DSA_TAG_PROTO_NONE; +} + +/* The programming model for the SJA1105 switch is "all-at-once" via static + * configuration tables. Some of these can be dynamically modified at runtime, + * but not the xMII mode parameters table. + * Furthermode, some PHYs may not have crystals for generating their clocks + * (e.g. RMII). Instead, their 50MHz clock is supplied via the SJA1105 port's + * ref_clk pin. So port clocking needs to be initialized early, before + * connecting to PHYs is attempted, otherwise they won't respond through MDIO. + * Setting correct PHY link speed does not matter now. + * But dsa_slave_phy_setup is called later than sja1105_setup, so the PHY + * bindings are not yet parsed by DSA core. We need to parse early so that we + * can populate the xMII mode parameters table. + */ +static int sja1105_setup(struct dsa_switch *ds) +{ + struct sja1105_dt_port ports[SJA1105_NUM_PORTS]; + struct sja1105_private *priv = ds->priv; + int rc; + + rc = sja1105_parse_dt(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "Failed to parse DT: %d\n", rc); + return rc; + } + /* Create and send configuration down to device */ + rc = sja1105_static_config_load(priv, ports); + if (rc < 0) { + dev_err(ds->dev, "Failed to load static config: %d\n", rc); + return rc; + } + /* Configure the CGU (PHY link modes and speeds) */ + rc = sja1105_clocking_setup(priv); + if (rc < 0) { + dev_err(ds->dev, "Failed to configure MII clocking: %d\n", rc); + return rc; + } + + return 0; +} + +static const struct dsa_switch_ops sja1105_switch_ops = { + .get_tag_protocol = sja1105_get_tag_protocol, + .setup = sja1105_setup, + .adjust_link = sja1105_adjust_link, + .port_bridge_join = sja1105_bridge_join, + .port_bridge_leave = sja1105_bridge_leave, +}; + +static int sja1105_check_device_id(struct sja1105_private *priv) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 prod_id[SJA1105_SIZE_DEVICE_ID] = {0}; + struct device *dev = &priv->spidev->dev; + u64 device_id; + u64 part_no; + int rc; + + rc = sja1105_spi_send_int(priv, SPI_READ, regs->device_id, + &device_id, SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + if (device_id != priv->info->device_id) { + dev_err(dev, "Expected device ID 0x%llx but read 0x%llx\n", + priv->info->device_id, device_id); + return -ENODEV; + } + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, regs->prod_id, + prod_id, SJA1105_SIZE_DEVICE_ID); + if (rc < 0) + return rc; + + sja1105_unpack(prod_id, &part_no, 19, 4, SJA1105_SIZE_DEVICE_ID); + + if (part_no != priv->info->part_no) { + dev_err(dev, "Expected part number 0x%llx but read 0x%llx\n", + priv->info->part_no, part_no); + return -ENODEV; + } + + return 0; +} + +static int sja1105_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct sja1105_private *priv; + struct dsa_switch *ds; + int rc; + + if (!dev->of_node) { + dev_err(dev, "No DTS bindings for SJA1105 driver\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(struct sja1105_private), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* Configure the optional reset pin and bring up switch */ + priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(priv->reset_gpio)) + dev_dbg(dev, "reset-gpios not defined, ignoring\n"); + else + sja1105_hw_reset(priv->reset_gpio, 1, 1); + + /* Populate our driver private structure (priv) based on + * the device tree node that was probed (spi) + */ + priv->spidev = spi; + spi_set_drvdata(spi, priv); + + /* Configure the SPI bus */ + spi->bits_per_word = 8; + rc = spi_setup(spi); + if (rc < 0) { + dev_err(dev, "Could not init SPI\n"); + return rc; + } + + priv->info = of_device_get_match_data(dev); + + /* Detect hardware device */ + rc = sja1105_check_device_id(priv); + if (rc < 0) { + dev_err(dev, "Device ID check failed: %d\n", rc); + return rc; + } + + dev_info(dev, "Probed switch chip: %s\n", priv->info->name); + + ds = dsa_switch_alloc(dev, SJA1105_NUM_PORTS); + if (!ds) + return -ENOMEM; + + ds->ops = &sja1105_switch_ops; + ds->priv = priv; + priv->ds = ds; + + return dsa_register_switch(priv->ds); +} + +static int sja1105_remove(struct spi_device *spi) +{ + struct sja1105_private *priv = spi_get_drvdata(spi); + + dsa_unregister_switch(priv->ds); + sja1105_static_config_free(&priv->static_config); + return 0; +} + +static const struct of_device_id sja1105_dt_ids[] = { + { .compatible = "nxp,sja1105e", .data = &sja1105e_info }, + { .compatible = "nxp,sja1105t", .data = &sja1105t_info }, + { .compatible = "nxp,sja1105p", .data = &sja1105p_info }, + { .compatible = "nxp,sja1105q", .data = &sja1105q_info }, + { .compatible = "nxp,sja1105r", .data = &sja1105r_info }, + { .compatible = "nxp,sja1105s", .data = &sja1105s_info }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, sja1105_dt_ids); + +static struct spi_driver sja1105_driver = { + .driver = { + .name = "sja1105", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sja1105_dt_ids), + }, + .probe = sja1105_probe, + .remove = sja1105_remove, +}; + +module_spi_driver(sja1105_driver); + +MODULE_AUTHOR("Vladimir Oltean <olteanv@gmail.com>"); +MODULE_AUTHOR("Georg Waibel <georg.waibel@sensor-technik.de>"); +MODULE_DESCRIPTION("SJA1105 Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/net/dsa/sja1105/sja1105_spi.c b/drivers/net/dsa/sja1105/sja1105_spi.c new file mode 100644 index 000000000000..07890bbf40f8 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_spi.c @@ -0,0 +1,553 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018, Sensor-Technik Wiedemann GmbH + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include <linux/spi/spi.h> +#include <linux/packing.h> +#include "sja1105.h" + +#define SJA1105_SIZE_RESET_CMD 4 +#define SJA1105_SIZE_SPI_MSG_HEADER 4 +#define SJA1105_SIZE_SPI_MSG_MAXLEN (64 * 4) +#define SJA1105_SIZE_SPI_TRANSFER_MAX \ + (SJA1105_SIZE_SPI_MSG_HEADER + SJA1105_SIZE_SPI_MSG_MAXLEN) + +static int sja1105_spi_transfer(const struct sja1105_private *priv, + const void *tx, void *rx, int size) +{ + struct spi_device *spi = priv->spidev; + struct spi_transfer transfer = { + .tx_buf = tx, + .rx_buf = rx, + .len = size, + }; + struct spi_message msg; + int rc; + + if (size > SJA1105_SIZE_SPI_TRANSFER_MAX) { + dev_err(&spi->dev, "SPI message (%d) longer than max of %d\n", + size, SJA1105_SIZE_SPI_TRANSFER_MAX); + return -EMSGSIZE; + } + + spi_message_init(&msg); + spi_message_add_tail(&transfer, &msg); + + rc = spi_sync(spi, &msg); + if (rc < 0) { + dev_err(&spi->dev, "SPI transfer failed: %d\n", rc); + return rc; + } + + return rc; +} + +static void +sja1105_spi_message_pack(void *buf, const struct sja1105_spi_message *msg) +{ + const int size = SJA1105_SIZE_SPI_MSG_HEADER; + + memset(buf, 0, size); + + sja1105_pack(buf, &msg->access, 31, 31, size); + sja1105_pack(buf, &msg->read_count, 30, 25, size); + sja1105_pack(buf, &msg->address, 24, 4, size); +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr, taking size_bytes from *packed_buf + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr, writing size_bytes into *packed_buf + * + * This function should only be called if it is priorly known that + * @size_bytes is smaller than SIZE_SPI_MSG_MAXLEN. Larger packed buffers + * are chunked in smaller pieces by sja1105_spi_send_long_packed_buf below. + */ +int sja1105_spi_send_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + void *packed_buf, size_t size_bytes) +{ + u8 tx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0}; + u8 rx_buf[SJA1105_SIZE_SPI_TRANSFER_MAX] = {0}; + const int msg_len = size_bytes + SJA1105_SIZE_SPI_MSG_HEADER; + struct sja1105_spi_message msg = {0}; + int rc; + + if (msg_len > SJA1105_SIZE_SPI_TRANSFER_MAX) + return -ERANGE; + + msg.access = rw; + msg.address = reg_addr; + if (rw == SPI_READ) + msg.read_count = size_bytes / 4; + + sja1105_spi_message_pack(tx_buf, &msg); + + if (rw == SPI_WRITE) + memcpy(tx_buf + SJA1105_SIZE_SPI_MSG_HEADER, + packed_buf, size_bytes); + + rc = sja1105_spi_transfer(priv, tx_buf, rx_buf, msg_len); + if (rc < 0) + return rc; + + if (rw == SPI_READ) + memcpy(packed_buf, rx_buf + SJA1105_SIZE_SPI_MSG_HEADER, + size_bytes); + + return 0; +} + +/* If @rw is: + * - SPI_WRITE: creates and sends an SPI write message at absolute + * address reg_addr, taking size_bytes from *packed_buf + * - SPI_READ: creates and sends an SPI read message from absolute + * address reg_addr, writing size_bytes into *packed_buf + * + * The u64 *value is unpacked, meaning that it's stored in the native + * CPU endianness and directly usable by software running on the core. + * + * This is a wrapper around sja1105_spi_send_packed_buf(). + */ +int sja1105_spi_send_int(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 reg_addr, + u64 *value, u64 size_bytes) +{ + u8 packed_buf[SJA1105_SIZE_SPI_MSG_MAXLEN]; + int rc; + + if (size_bytes > SJA1105_SIZE_SPI_MSG_MAXLEN) + return -ERANGE; + + if (rw == SPI_WRITE) + sja1105_pack(packed_buf, value, 8 * size_bytes - 1, 0, + size_bytes); + + rc = sja1105_spi_send_packed_buf(priv, rw, reg_addr, packed_buf, + size_bytes); + + if (rw == SPI_READ) + sja1105_unpack(packed_buf, value, 8 * size_bytes - 1, 0, + size_bytes); + + return rc; +} + +/* Should be used if a @packed_buf larger than SJA1105_SIZE_SPI_MSG_MAXLEN + * must be sent/received. Splitting the buffer into chunks and assembling + * those into SPI messages is done automatically by this function. + */ +int sja1105_spi_send_long_packed_buf(const struct sja1105_private *priv, + sja1105_spi_rw_mode_t rw, u64 base_addr, + void *packed_buf, u64 buf_len) +{ + struct chunk { + void *buf_ptr; + int len; + u64 spi_address; + } chunk; + int distance_to_end; + int rc; + + /* Initialize chunk */ + chunk.buf_ptr = packed_buf; + chunk.spi_address = base_addr; + chunk.len = min_t(int, buf_len, SJA1105_SIZE_SPI_MSG_MAXLEN); + + while (chunk.len) { + rc = sja1105_spi_send_packed_buf(priv, rw, chunk.spi_address, + chunk.buf_ptr, chunk.len); + if (rc < 0) + return rc; + + chunk.buf_ptr += chunk.len; + chunk.spi_address += chunk.len / 4; + distance_to_end = (uintptr_t)(packed_buf + buf_len - + chunk.buf_ptr); + chunk.len = min(distance_to_end, SJA1105_SIZE_SPI_MSG_MAXLEN); + } + + return 0; +} + +/* Back-ported structure from UM11040 Table 112. + * Reset control register (addr. 100440h) + * In the SJA1105 E/T, only warm_rst and cold_rst are + * supported (exposed in UM10944 as rst_ctrl), but the bit + * offsets of warm_rst and cold_rst are actually reversed. + */ +struct sja1105_reset_cmd { + u64 switch_rst; + u64 cfg_rst; + u64 car_rst; + u64 otp_rst; + u64 warm_rst; + u64 cold_rst; + u64 por_rst; +}; + +static void +sja1105et_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset) +{ + const int size = SJA1105_SIZE_RESET_CMD; + + memset(buf, 0, size); + + sja1105_pack(buf, &reset->cold_rst, 3, 3, size); + sja1105_pack(buf, &reset->warm_rst, 2, 2, size); +} + +static void +sja1105pqrs_reset_cmd_pack(void *buf, const struct sja1105_reset_cmd *reset) +{ + const int size = SJA1105_SIZE_RESET_CMD; + + memset(buf, 0, size); + + sja1105_pack(buf, &reset->switch_rst, 8, 8, size); + sja1105_pack(buf, &reset->cfg_rst, 7, 7, size); + sja1105_pack(buf, &reset->car_rst, 5, 5, size); + sja1105_pack(buf, &reset->otp_rst, 4, 4, size); + sja1105_pack(buf, &reset->warm_rst, 3, 3, size); + sja1105_pack(buf, &reset->cold_rst, 2, 2, size); + sja1105_pack(buf, &reset->por_rst, 1, 1, size); +} + +static int sja1105et_reset_cmd(const void *ctx, const void *data) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_reset_cmd *reset = data; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + u8 packed_buf[SJA1105_SIZE_RESET_CMD]; + + if (reset->switch_rst || + reset->cfg_rst || + reset->car_rst || + reset->otp_rst || + reset->por_rst) { + dev_err(dev, "Only warm and cold reset is supported " + "for SJA1105 E/T!\n"); + return -EINVAL; + } + + if (reset->warm_rst) + dev_dbg(dev, "Warm reset requested\n"); + if (reset->cold_rst) + dev_dbg(dev, "Cold reset requested\n"); + + sja1105et_reset_cmd_pack(packed_buf, reset); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu, + packed_buf, SJA1105_SIZE_RESET_CMD); +} + +static int sja1105pqrs_reset_cmd(const void *ctx, const void *data) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_reset_cmd *reset = data; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = priv->ds->dev; + u8 packed_buf[SJA1105_SIZE_RESET_CMD]; + + if (reset->switch_rst) + dev_dbg(dev, "Main reset for all functional modules requested\n"); + if (reset->cfg_rst) + dev_dbg(dev, "Chip configuration reset requested\n"); + if (reset->car_rst) + dev_dbg(dev, "Clock and reset control logic reset requested\n"); + if (reset->otp_rst) + dev_dbg(dev, "OTP read cycle for reading product " + "config settings requested\n"); + if (reset->warm_rst) + dev_dbg(dev, "Warm reset requested\n"); + if (reset->cold_rst) + dev_dbg(dev, "Cold reset requested\n"); + if (reset->por_rst) + dev_dbg(dev, "Power-on reset requested\n"); + + sja1105pqrs_reset_cmd_pack(packed_buf, reset); + + return sja1105_spi_send_packed_buf(priv, SPI_WRITE, regs->rgu, + packed_buf, SJA1105_SIZE_RESET_CMD); +} + +static int sja1105_cold_reset(const struct sja1105_private *priv) +{ + struct sja1105_reset_cmd reset = {0}; + + reset.cold_rst = 1; + return priv->info->reset_cmd(priv, &reset); +} + +struct sja1105_status { + u64 configs; + u64 crcchkl; + u64 ids; + u64 crcchkg; +}; + +/* This is not reading the entire General Status area, which is also + * divergent between E/T and P/Q/R/S, but only the relevant bits for + * ensuring that the static config upload procedure was successful. + */ +static void sja1105_status_unpack(void *buf, struct sja1105_status *status) +{ + /* So that addition translates to 4 bytes */ + u32 *p = buf; + + /* device_id is missing from the buffer, but we don't + * want to diverge from the manual definition of the + * register addresses, so we'll back off one step with + * the register pointer, and never access p[0]. + */ + p--; + sja1105_unpack(p + 0x1, &status->configs, 31, 31, 4); + sja1105_unpack(p + 0x1, &status->crcchkl, 30, 30, 4); + sja1105_unpack(p + 0x1, &status->ids, 29, 29, 4); + sja1105_unpack(p + 0x1, &status->crcchkg, 28, 28, 4); +} + +static int sja1105_status_get(struct sja1105_private *priv, + struct sja1105_status *status) +{ + const struct sja1105_regs *regs = priv->info->regs; + u8 packed_buf[4]; + int rc; + + rc = sja1105_spi_send_packed_buf(priv, SPI_READ, + regs->status, + packed_buf, 4); + if (rc < 0) + return rc; + + sja1105_status_unpack(packed_buf, status); + + return 0; +} + +/* Not const because unpacking priv->static_config into buffers and preparing + * for upload requires the recalculation of table CRCs and updating the + * structures with these. + */ +static int +static_config_buf_prepare_for_upload(struct sja1105_private *priv, + void *config_buf, int buf_len) +{ + struct sja1105_static_config *config = &priv->static_config; + struct sja1105_table_header final_header; + sja1105_config_valid_t valid; + char *final_header_ptr; + int crc_len; + + valid = sja1105_static_config_check_valid(config); + if (valid != SJA1105_CONFIG_OK) { + dev_err(&priv->spidev->dev, + sja1105_static_config_error_msg[valid]); + return -EINVAL; + } + + /* Write Device ID and config tables to config_buf */ + sja1105_static_config_pack(config_buf, config); + /* Recalculate CRC of the last header (right now 0xDEADBEEF). + * Don't include the CRC field itself. + */ + crc_len = buf_len - 4; + /* Read the whole table header */ + final_header_ptr = config_buf + buf_len - SJA1105_SIZE_TABLE_HEADER; + sja1105_table_header_packing(final_header_ptr, &final_header, UNPACK); + /* Modify */ + final_header.crc = sja1105_crc32(config_buf, crc_len); + /* Rewrite */ + sja1105_table_header_packing(final_header_ptr, &final_header, PACK); + + return 0; +} + +#define RETRIES 10 + +int sja1105_static_config_upload(struct sja1105_private *priv) +{ + struct sja1105_static_config *config = &priv->static_config; + const struct sja1105_regs *regs = priv->info->regs; + struct device *dev = &priv->spidev->dev; + struct sja1105_status status; + int rc, retries = RETRIES; + u8 *config_buf; + int buf_len; + + buf_len = sja1105_static_config_get_length(config); + config_buf = kcalloc(buf_len, sizeof(char), GFP_KERNEL); + if (!config_buf) + return -ENOMEM; + + rc = static_config_buf_prepare_for_upload(priv, config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Invalid config, cannot upload\n"); + return -EINVAL; + } + do { + /* Put the SJA1105 in programming mode */ + rc = sja1105_cold_reset(priv); + if (rc < 0) { + dev_err(dev, "Failed to reset switch, retrying...\n"); + continue; + } + /* Wait for the switch to come out of reset */ + usleep_range(1000, 5000); + /* Upload the static config to the device */ + rc = sja1105_spi_send_long_packed_buf(priv, SPI_WRITE, + regs->config, + config_buf, buf_len); + if (rc < 0) { + dev_err(dev, "Failed to upload config, retrying...\n"); + continue; + } + /* Check that SJA1105 responded well to the config upload */ + rc = sja1105_status_get(priv, &status); + if (rc < 0) + continue; + + if (status.ids == 1) { + dev_err(dev, "Mismatch between hardware and static config " + "device id. Wrote 0x%llx, wants 0x%llx\n", + config->device_id, priv->info->device_id); + continue; + } + if (status.crcchkl == 1) { + dev_err(dev, "Switch reported invalid local CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.crcchkg == 1) { + dev_err(dev, "Switch reported invalid global CRC on " + "the uploaded config, retrying...\n"); + continue; + } + if (status.configs == 0) { + dev_err(dev, "Switch reported that configuration is " + "invalid, retrying...\n"); + continue; + } + } while (--retries && (status.crcchkl == 1 || status.crcchkg == 1 || + status.configs == 0 || status.ids == 1)); + + if (!retries) { + rc = -EIO; + dev_err(dev, "Failed to upload config to device, giving up\n"); + goto out; + } else if (retries != RETRIES - 1) { + dev_info(dev, "Succeeded after %d tried\n", RETRIES - retries); + } + + dev_info(dev, "Reset switch and programmed static config\n"); +out: + kfree(config_buf); + return rc; +} + +struct sja1105_regs sja1105et_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .config = 0x020000, + .rgu = 0x100440, + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + /* UM10944.pdf, Table 86, ACU Register overview */ + .rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, + .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, + .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, + /* UM10944.pdf, Table 78, CGU Register overview */ + .mii_tx_clk = {0x100013, 0x10001A, 0x100021, 0x100028, 0x10002F}, + .mii_rx_clk = {0x100014, 0x10001B, 0x100022, 0x100029, 0x100030}, + .mii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, + .mii_ext_rx_clk = {0x100019, 0x100020, 0x100027, 0x10002E, 0x100035}, + .rgmii_tx_clk = {0x100016, 0x10001D, 0x100024, 0x10002B, 0x100032}, + .rmii_ref_clk = {0x100015, 0x10001C, 0x100023, 0x10002A, 0x100031}, + .rmii_ext_tx_clk = {0x100018, 0x10001F, 0x100026, 0x10002D, 0x100034}, +}; + +struct sja1105_regs sja1105pqrs_regs = { + .device_id = 0x0, + .prod_id = 0x100BC3, + .status = 0x1, + .config = 0x020000, + .rgu = 0x100440, + .pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .rmii_pll1 = 0x10000A, + .cgu_idiv = {0x10000B, 0x10000C, 0x10000D, 0x10000E, 0x10000F}, + /* UM10944.pdf, Table 86, ACU Register overview */ + .rgmii_pad_mii_tx = {0x100800, 0x100802, 0x100804, 0x100806, 0x100808}, + .mac = {0x200, 0x202, 0x204, 0x206, 0x208}, + .mac_hl1 = {0x400, 0x410, 0x420, 0x430, 0x440}, + .mac_hl2 = {0x600, 0x610, 0x620, 0x630, 0x640}, + /* UM11040.pdf, Table 114 */ + .mii_tx_clk = {0x100013, 0x100019, 0x10001F, 0x100025, 0x10002B}, + .mii_rx_clk = {0x100014, 0x10001A, 0x100020, 0x100026, 0x10002C}, + .mii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .mii_ext_rx_clk = {0x100018, 0x10001E, 0x100024, 0x10002A, 0x100030}, + .rgmii_tx_clk = {0x100016, 0x10001C, 0x100022, 0x100028, 0x10002E}, + .rmii_ref_clk = {0x100015, 0x10001B, 0x100021, 0x100027, 0x10002D}, + .rmii_ext_tx_clk = {0x100017, 0x10001D, 0x100023, 0x100029, 0x10002F}, + .qlevel = {0x604, 0x614, 0x624, 0x634, 0x644}, +}; + +struct sja1105_info sja1105e_info = { + .device_id = SJA1105E_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105e_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .reset_cmd = sja1105et_reset_cmd, + .regs = &sja1105et_regs, + .name = "SJA1105E", +}; +struct sja1105_info sja1105t_info = { + .device_id = SJA1105T_DEVICE_ID, + .part_no = SJA1105ET_PART_NO, + .static_ops = sja1105t_table_ops, + .dyn_ops = sja1105et_dyn_ops, + .reset_cmd = sja1105et_reset_cmd, + .regs = &sja1105et_regs, + .name = "SJA1105T", +}; +struct sja1105_info sja1105p_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105P_PART_NO, + .static_ops = sja1105p_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105P", +}; +struct sja1105_info sja1105q_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105Q_PART_NO, + .static_ops = sja1105q_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105Q", +}; +struct sja1105_info sja1105r_info = { + .device_id = SJA1105PR_DEVICE_ID, + .part_no = SJA1105R_PART_NO, + .static_ops = sja1105r_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .reset_cmd = sja1105pqrs_reset_cmd, + .regs = &sja1105pqrs_regs, + .name = "SJA1105R", +}; +struct sja1105_info sja1105s_info = { + .device_id = SJA1105QS_DEVICE_ID, + .part_no = SJA1105S_PART_NO, + .static_ops = sja1105s_table_ops, + .dyn_ops = sja1105pqrs_dyn_ops, + .regs = &sja1105pqrs_regs, + .reset_cmd = sja1105pqrs_reset_cmd, + .name = "SJA1105S", +}; diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.c b/drivers/net/dsa/sja1105/sja1105_static_config.c new file mode 100644 index 000000000000..84ee623c6336 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.c @@ -0,0 +1,949 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#include "sja1105_static_config.h" +#include <linux/crc32.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/errno.h> + +/* Convenience wrappers over the generic packing functions. These take into + * account the SJA1105 memory layout quirks and provide some level of + * programmer protection against incorrect API use. The errors are not expected + * to occur durring runtime, therefore printing and swallowing them here is + * appropriate instead of clutterring up higher-level code. + */ +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len) +{ + int rc = packing(buf, (u64 *)val, start, end, len, + PACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len) +{ + int rc = packing((void *)buf, val, start, end, len, + UNPACK, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + else if (rc == -ERANGE) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + dump_stack(); +} + +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op) +{ + int rc = packing(buf, val, start, end, len, op, QUIRK_LSW32_IS_FIRST); + + if (likely(!rc)) + return; + + if (rc == -EINVAL) { + pr_err("Start bit (%d) expected to be larger than end (%d)\n", + start, end); + } else if (rc == -ERANGE) { + if ((start - end + 1) > 64) + pr_err("Field %d-%d too large for 64 bits!\n", + start, end); + else + pr_err("Cannot store %llx inside bits %d-%d (would truncate)\n", + *val, start, end); + } + dump_stack(); +} + +/* Little-endian Ethernet CRC32 of data packed as big-endian u32 words */ +u32 sja1105_crc32(const void *buf, size_t len) +{ + unsigned int i; + u64 word; + u32 crc; + + /* seed */ + crc = ~0; + for (i = 0; i < len; i += 4) { + sja1105_unpack((void *)buf + i, &word, 31, 0, 4); + crc = crc32_le(crc, (u8 *)&word, 4); + } + return ~crc; +} + +static size_t sja1105et_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 319, 319, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 318, 318, size, op); + sja1105_packing(buf, &entry->switchid, 317, 315, size, op); + sja1105_packing(buf, &entry->hostprio, 314, 312, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 311, 264, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 263, 216, size, op); + sja1105_packing(buf, &entry->mac_flt1, 215, 168, size, op); + sja1105_packing(buf, &entry->mac_flt0, 167, 120, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 119, 119, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 118, 118, size, op); + sja1105_packing(buf, &entry->send_meta1, 117, 117, size, op); + sja1105_packing(buf, &entry->send_meta0, 116, 116, size, op); + sja1105_packing(buf, &entry->casc_port, 115, 113, size, op); + sja1105_packing(buf, &entry->host_port, 112, 110, size, op); + sja1105_packing(buf, &entry->mirr_port, 109, 107, size, op); + sja1105_packing(buf, &entry->vlmarker, 106, 75, size, op); + sja1105_packing(buf, &entry->vlmask, 74, 43, size, op); + sja1105_packing(buf, &entry->tpid, 42, 27, size, op); + sja1105_packing(buf, &entry->ignore2stf, 26, 26, size, op); + sja1105_packing(buf, &entry->tpid2, 25, 10, size, op); + return size; +} + +static size_t +sja1105pqrs_general_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY; + struct sja1105_general_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vllupformat, 351, 351, size, op); + sja1105_packing(buf, &entry->mirr_ptacu, 350, 350, size, op); + sja1105_packing(buf, &entry->switchid, 349, 347, size, op); + sja1105_packing(buf, &entry->hostprio, 346, 344, size, op); + sja1105_packing(buf, &entry->mac_fltres1, 343, 296, size, op); + sja1105_packing(buf, &entry->mac_fltres0, 295, 248, size, op); + sja1105_packing(buf, &entry->mac_flt1, 247, 200, size, op); + sja1105_packing(buf, &entry->mac_flt0, 199, 152, size, op); + sja1105_packing(buf, &entry->incl_srcpt1, 151, 151, size, op); + sja1105_packing(buf, &entry->incl_srcpt0, 150, 150, size, op); + sja1105_packing(buf, &entry->send_meta1, 149, 149, size, op); + sja1105_packing(buf, &entry->send_meta0, 148, 148, size, op); + sja1105_packing(buf, &entry->casc_port, 147, 145, size, op); + sja1105_packing(buf, &entry->host_port, 144, 142, size, op); + sja1105_packing(buf, &entry->mirr_port, 141, 139, size, op); + sja1105_packing(buf, &entry->vlmarker, 138, 107, size, op); + sja1105_packing(buf, &entry->vlmask, 106, 75, size, op); + sja1105_packing(buf, &entry->tpid, 74, 59, size, op); + sja1105_packing(buf, &entry->ignore2stf, 58, 58, size, op); + sja1105_packing(buf, &entry->tpid2, 57, 42, size, op); + sja1105_packing(buf, &entry->queue_ts, 41, 41, size, op); + sja1105_packing(buf, &entry->egrmirrvid, 40, 29, size, op); + sja1105_packing(buf, &entry->egrmirrpcp, 28, 26, size, op); + sja1105_packing(buf, &entry->egrmirrdei, 25, 25, size, op); + sja1105_packing(buf, &entry->replay_port, 24, 22, size, op); + return size; +} + +static size_t +sja1105_l2_forwarding_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY; + struct sja1105_l2_forwarding_params_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->max_dynp, 95, 93, size, op); + for (i = 0, offset = 13; i < 8; i++, offset += 10) + sja1105_packing(buf, &entry->part_spc[i], + offset + 9, offset + 0, size, op); + return size; +} + +size_t sja1105_l2_forwarding_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_FORWARDING_ENTRY; + struct sja1105_l2_forwarding_entry *entry = entry_ptr; + int offset, i; + + sja1105_packing(buf, &entry->bc_domain, 63, 59, size, op); + sja1105_packing(buf, &entry->reach_port, 58, 54, size, op); + sja1105_packing(buf, &entry->fl_domain, 53, 49, size, op); + for (i = 0, offset = 25; i < 8; i++, offset += 3) + sja1105_packing(buf, &entry->vlan_pmap[i], + offset + 2, offset + 0, size, op); + return size; +} + +static size_t +sja1105et_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->maxage, 31, 17, size, op); + sja1105_packing(buf, &entry->dyn_tbsz, 16, 14, size, op); + sja1105_packing(buf, &entry->poly, 13, 6, size, op); + sja1105_packing(buf, &entry->shared_learn, 5, 5, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 4, 4, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 3, 3, size, op); + return size; +} + +static size_t +sja1105pqrs_l2_lookup_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY; + struct sja1105_l2_lookup_params_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->maxage, 57, 43, size, op); + sja1105_packing(buf, &entry->shared_learn, 27, 27, size, op); + sja1105_packing(buf, &entry->no_enf_hostprt, 26, 26, size, op); + sja1105_packing(buf, &entry->no_mgmt_learn, 25, 25, size, op); + return size; +} + +size_t sja1105et_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->vlanid, 95, 84, size, op); + sja1105_packing(buf, &entry->macaddr, 83, 36, size, op); + sja1105_packing(buf, &entry->destports, 35, 31, size, op); + sja1105_packing(buf, &entry->enfport, 30, 30, size, op); + sja1105_packing(buf, &entry->index, 29, 20, size, op); + return size; +} + +size_t sja1105pqrs_l2_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY; + struct sja1105_l2_lookup_entry *entry = entry_ptr; + + /* These are static L2 lookup entries, so the structure + * should match UM11040 Table 16/17 definitions when + * LOCKEDS is 1. + */ + sja1105_packing(buf, &entry->vlanid, 81, 70, size, op); + sja1105_packing(buf, &entry->macaddr, 69, 22, size, op); + sja1105_packing(buf, &entry->destports, 21, 17, size, op); + sja1105_packing(buf, &entry->enfport, 16, 16, size, op); + sja1105_packing(buf, &entry->index, 15, 6, size, op); + return size; +} + +static size_t sja1105_l2_policing_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_L2_POLICING_ENTRY; + struct sja1105_l2_policing_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->sharindx, 63, 58, size, op); + sja1105_packing(buf, &entry->smax, 57, 42, size, op); + sja1105_packing(buf, &entry->rate, 41, 26, size, op); + sja1105_packing(buf, &entry->maxlen, 25, 15, size, op); + sja1105_packing(buf, &entry->partition, 14, 12, size, op); + return size; +} + +static size_t sja1105et_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 72; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 71, 67, size, op); + sja1105_packing(buf, &entry->speed, 66, 65, size, op); + sja1105_packing(buf, &entry->tp_delin, 64, 49, size, op); + sja1105_packing(buf, &entry->tp_delout, 48, 33, size, op); + sja1105_packing(buf, &entry->maxage, 32, 25, size, op); + sja1105_packing(buf, &entry->vlanprio, 24, 22, size, op); + sja1105_packing(buf, &entry->vlanid, 21, 10, size, op); + sja1105_packing(buf, &entry->ing_mirr, 9, 9, size, op); + sja1105_packing(buf, &entry->egr_mirr, 8, 8, size, op); + sja1105_packing(buf, &entry->drpnona664, 7, 7, size, op); + sja1105_packing(buf, &entry->drpdtag, 6, 6, size, op); + sja1105_packing(buf, &entry->drpuntag, 5, 5, size, op); + sja1105_packing(buf, &entry->retag, 4, 4, size, op); + sja1105_packing(buf, &entry->dyn_learn, 3, 3, size, op); + sja1105_packing(buf, &entry->egress, 2, 2, size, op); + sja1105_packing(buf, &entry->ingress, 1, 1, size, op); + return size; +} + +size_t sja1105pqrs_mac_config_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY; + struct sja1105_mac_config_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 104; i < 8; i++, offset += 19) { + sja1105_packing(buf, &entry->enabled[i], + offset + 0, offset + 0, size, op); + sja1105_packing(buf, &entry->base[i], + offset + 9, offset + 1, size, op); + sja1105_packing(buf, &entry->top[i], + offset + 18, offset + 10, size, op); + } + sja1105_packing(buf, &entry->ifg, 103, 99, size, op); + sja1105_packing(buf, &entry->speed, 98, 97, size, op); + sja1105_packing(buf, &entry->tp_delin, 96, 81, size, op); + sja1105_packing(buf, &entry->tp_delout, 80, 65, size, op); + sja1105_packing(buf, &entry->maxage, 64, 57, size, op); + sja1105_packing(buf, &entry->vlanprio, 56, 54, size, op); + sja1105_packing(buf, &entry->vlanid, 53, 42, size, op); + sja1105_packing(buf, &entry->ing_mirr, 41, 41, size, op); + sja1105_packing(buf, &entry->egr_mirr, 40, 40, size, op); + sja1105_packing(buf, &entry->drpnona664, 39, 39, size, op); + sja1105_packing(buf, &entry->drpdtag, 38, 38, size, op); + sja1105_packing(buf, &entry->drpuntag, 35, 35, size, op); + sja1105_packing(buf, &entry->retag, 34, 34, size, op); + sja1105_packing(buf, &entry->dyn_learn, 33, 33, size, op); + sja1105_packing(buf, &entry->egress, 32, 32, size, op); + sja1105_packing(buf, &entry->ingress, 31, 31, size, op); + return size; +} + +size_t sja1105_vlan_lookup_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY; + struct sja1105_vlan_lookup_entry *entry = entry_ptr; + + sja1105_packing(buf, &entry->ving_mirr, 63, 59, size, op); + sja1105_packing(buf, &entry->vegr_mirr, 58, 54, size, op); + sja1105_packing(buf, &entry->vmemb_port, 53, 49, size, op); + sja1105_packing(buf, &entry->vlan_bc, 48, 44, size, op); + sja1105_packing(buf, &entry->tag_port, 43, 39, size, op); + sja1105_packing(buf, &entry->vlanid, 38, 27, size, op); + return size; +} + +static size_t sja1105_xmii_params_entry_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_XMII_PARAMS_ENTRY; + struct sja1105_xmii_params_entry *entry = entry_ptr; + int offset, i; + + for (i = 0, offset = 17; i < 5; i++, offset += 3) { + sja1105_packing(buf, &entry->xmii_mode[i], + offset + 1, offset + 0, size, op); + sja1105_packing(buf, &entry->phy_mac[i], + offset + 2, offset + 2, size, op); + } + return size; +} + +size_t sja1105_table_header_packing(void *buf, void *entry_ptr, + enum packing_op op) +{ + const size_t size = SJA1105_SIZE_TABLE_HEADER; + struct sja1105_table_header *entry = entry_ptr; + + sja1105_packing(buf, &entry->block_id, 31, 24, size, op); + sja1105_packing(buf, &entry->len, 55, 32, size, op); + sja1105_packing(buf, &entry->crc, 95, 64, size, op); + return size; +} + +/* WARNING: the *hdr pointer is really non-const, because it is + * modifying the CRC of the header for a 2-stage packing operation + */ +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr) +{ + /* First pack the table as-is, then calculate the CRC, and + * finally put the proper CRC into the packed buffer + */ + memset(buf, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(buf, hdr, PACK); + hdr->crc = sja1105_crc32(buf, SJA1105_SIZE_TABLE_HEADER - 4); + sja1105_pack(buf + SJA1105_SIZE_TABLE_HEADER - 4, &hdr->crc, 31, 0, 4); +} + +static void sja1105_table_write_crc(u8 *table_start, u8 *crc_ptr) +{ + u64 computed_crc; + int len_bytes; + + len_bytes = (uintptr_t)(crc_ptr - table_start); + computed_crc = sja1105_crc32(table_start, len_bytes); + sja1105_pack(crc_ptr, &computed_crc, 31, 0, 4); +} + +/* The block IDs that the switches support are unfortunately sparse, so keep a + * mapping table to "block indices" and translate back and forth so that we + * don't waste useless memory in struct sja1105_static_config. + * Also, since the block id comes from essentially untrusted input (unpacking + * the static config from userspace) it has to be sanitized (range-checked) + * before blindly indexing kernel memory with the blk_idx. + */ +static u64 blk_id_map[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = BLKID_L2_LOOKUP, + [BLK_IDX_L2_POLICING] = BLKID_L2_POLICING, + [BLK_IDX_VLAN_LOOKUP] = BLKID_VLAN_LOOKUP, + [BLK_IDX_L2_FORWARDING] = BLKID_L2_FORWARDING, + [BLK_IDX_MAC_CONFIG] = BLKID_MAC_CONFIG, + [BLK_IDX_L2_LOOKUP_PARAMS] = BLKID_L2_LOOKUP_PARAMS, + [BLK_IDX_L2_FORWARDING_PARAMS] = BLKID_L2_FORWARDING_PARAMS, + [BLK_IDX_GENERAL_PARAMS] = BLKID_GENERAL_PARAMS, + [BLK_IDX_XMII_PARAMS] = BLKID_XMII_PARAMS, +}; + +const char *sja1105_static_config_error_msg[] = { + [SJA1105_CONFIG_OK] = "", + [SJA1105_MISSING_L2_POLICING_TABLE] = + "l2-policing-table needs to have at least one entry", + [SJA1105_MISSING_L2_FORWARDING_TABLE] = + "l2-forwarding-table is either missing or incomplete", + [SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE] = + "l2-forwarding-parameters-table is missing", + [SJA1105_MISSING_GENERAL_PARAMS_TABLE] = + "general-parameters-table is missing", + [SJA1105_MISSING_VLAN_TABLE] = + "vlan-lookup-table needs to have at least the default untagged VLAN", + [SJA1105_MISSING_XMII_TABLE] = + "xmii-table is missing", + [SJA1105_MISSING_MAC_TABLE] = + "mac-configuration-table needs to contain an entry for each port", + [SJA1105_OVERCOMMITTED_FRAME_MEMORY] = + "Not allowed to overcommit frame memory. L2 memory partitions " + "and VL memory partitions share the same space. The sum of all " + "16 memory partitions is not allowed to be larger than 929 " + "128-byte blocks (or 910 with retagging). Please adjust " + "l2-forwarding-parameters-table.part_spc and/or " + "vl-forwarding-parameters-table.partspc.", +}; + +sja1105_config_valid_t +static_config_check_memory_size(const struct sja1105_table *tables) +{ + const struct sja1105_l2_forwarding_params_entry *l2_fwd_params; + int i, mem = 0; + + l2_fwd_params = tables[BLK_IDX_L2_FORWARDING_PARAMS].entries; + + for (i = 0; i < 8; i++) + mem += l2_fwd_params->part_spc[i]; + + if (mem > SJA1105_MAX_FRAME_MEMORY) + return SJA1105_OVERCOMMITTED_FRAME_MEMORY; + + return SJA1105_CONFIG_OK; +} + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config) +{ + const struct sja1105_table *tables = config->tables; +#define IS_FULL(blk_idx) \ + (tables[blk_idx].entry_count == tables[blk_idx].ops->max_entry_count) + + if (tables[BLK_IDX_L2_POLICING].entry_count == 0) + return SJA1105_MISSING_L2_POLICING_TABLE; + + if (tables[BLK_IDX_VLAN_LOOKUP].entry_count == 0) + return SJA1105_MISSING_VLAN_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING)) + return SJA1105_MISSING_L2_FORWARDING_TABLE; + + if (!IS_FULL(BLK_IDX_MAC_CONFIG)) + return SJA1105_MISSING_MAC_TABLE; + + if (!IS_FULL(BLK_IDX_L2_FORWARDING_PARAMS)) + return SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_GENERAL_PARAMS)) + return SJA1105_MISSING_GENERAL_PARAMS_TABLE; + + if (!IS_FULL(BLK_IDX_XMII_PARAMS)) + return SJA1105_MISSING_XMII_TABLE; + + return static_config_check_memory_size(tables); +#undef IS_FULL +} + +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config) +{ + struct sja1105_table_header header = {0}; + enum sja1105_blk_idx i; + char *p = buf; + int j; + + sja1105_pack(p, &config->device_id, 31, 0, 4); + p += SJA1105_SIZE_DEVICE_ID; + + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + char *table_start; + + table = &config->tables[i]; + if (!table->entry_count) + continue; + + header.block_id = blk_id_map[i]; + header.len = table->entry_count * + table->ops->packed_entry_size / 4; + sja1105_table_header_pack_with_crc(p, &header); + p += SJA1105_SIZE_TABLE_HEADER; + table_start = p; + for (j = 0; j < table->entry_count; j++) { + u8 *entry_ptr = table->entries; + + entry_ptr += j * table->ops->unpacked_entry_size; + memset(p, 0, table->ops->packed_entry_size); + table->ops->packing(p, entry_ptr, PACK); + p += table->ops->packed_entry_size; + } + sja1105_table_write_crc(table_start, p); + p += 4; + } + /* Final header: + * Block ID does not matter + * Length of 0 marks that header is final + * CRC will be replaced on-the-fly on "config upload" + */ + header.block_id = 0; + header.len = 0; + header.crc = 0xDEADBEEF; + memset(p, 0, SJA1105_SIZE_TABLE_HEADER); + sja1105_table_header_packing(p, &header, PACK); +} + +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config) +{ + unsigned int sum; + unsigned int header_count; + enum sja1105_blk_idx i; + + /* Ending header */ + header_count = 1; + sum = SJA1105_SIZE_DEVICE_ID; + + /* Tables (headers and entries) */ + for (i = 0; i < BLK_IDX_MAX; i++) { + const struct sja1105_table *table; + + table = &config->tables[i]; + if (table->entry_count) + header_count++; + + sum += table->ops->packed_entry_size * table->entry_count; + } + /* Headers have an additional CRC at the end */ + sum += header_count * (SJA1105_SIZE_TABLE_HEADER + 4); + /* Last header does not have an extra CRC because there is no data */ + sum -= 4; + + return sum; +} + +/* Compatibility matrices */ + +/* SJA1105E: First generation, no TTEthernet */ +struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105T: First generation, TTEthernet */ +struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105et_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105et_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105ET_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105et_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105et_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105P: Second generation, no TTEthernet, no SGMII */ +struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105Q: Second generation, TTEthernet, no SGMII */ +struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105R: Second generation, no TTEthernet, SGMII */ +struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +/* SJA1105S: Second generation, TTEthernet, SGMII */ +struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX] = { + [BLK_IDX_L2_LOOKUP] = { + .packing = sja1105pqrs_l2_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_COUNT, + }, + [BLK_IDX_L2_POLICING] = { + .packing = sja1105_l2_policing_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_policing_entry), + .packed_entry_size = SJA1105_SIZE_L2_POLICING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_POLICING_COUNT, + }, + [BLK_IDX_VLAN_LOOKUP] = { + .packing = sja1105_vlan_lookup_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_vlan_lookup_entry), + .packed_entry_size = SJA1105_SIZE_VLAN_LOOKUP_ENTRY, + .max_entry_count = SJA1105_MAX_VLAN_LOOKUP_COUNT, + }, + [BLK_IDX_L2_FORWARDING] = { + .packing = sja1105_l2_forwarding_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_COUNT, + }, + [BLK_IDX_MAC_CONFIG] = { + .packing = sja1105pqrs_mac_config_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_mac_config_entry), + .packed_entry_size = SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY, + .max_entry_count = SJA1105_MAX_MAC_CONFIG_COUNT, + }, + [BLK_IDX_L2_LOOKUP_PARAMS] = { + .packing = sja1105pqrs_l2_lookup_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_lookup_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT, + }, + [BLK_IDX_L2_FORWARDING_PARAMS] = { + .packing = sja1105_l2_forwarding_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_l2_forwarding_params_entry), + .packed_entry_size = SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT, + }, + [BLK_IDX_GENERAL_PARAMS] = { + .packing = sja1105pqrs_general_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_general_params_entry), + .packed_entry_size = SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_GENERAL_PARAMS_COUNT, + }, + [BLK_IDX_XMII_PARAMS] = { + .packing = sja1105_xmii_params_entry_packing, + .unpacked_entry_size = sizeof(struct sja1105_xmii_params_entry), + .packed_entry_size = SJA1105_SIZE_XMII_PARAMS_ENTRY, + .max_entry_count = SJA1105_MAX_XMII_PARAMS_COUNT, + }, +}; + +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id) +{ + enum sja1105_blk_idx i; + + *config = (struct sja1105_static_config) {0}; + + /* Transfer static_ops array from priv into per-table ops + * for handier access + */ + for (i = 0; i < BLK_IDX_MAX; i++) + config->tables[i].ops = &static_ops[i]; + + config->device_id = device_id; + return 0; +} + +void sja1105_static_config_free(struct sja1105_static_config *config) +{ + enum sja1105_blk_idx i; + + for (i = 0; i < BLK_IDX_MAX; i++) { + if (config->tables[i].entry_count) { + kfree(config->tables[i].entries); + config->tables[i].entry_count = 0; + } + } +} diff --git a/drivers/net/dsa/sja1105/sja1105_static_config.h b/drivers/net/dsa/sja1105/sja1105_static_config.h new file mode 100644 index 000000000000..7b0a02fe3147 --- /dev/null +++ b/drivers/net/dsa/sja1105/sja1105_static_config.h @@ -0,0 +1,250 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright (c) 2016-2018, NXP Semiconductors + * Copyright (c) 2018-2019, Vladimir Oltean <olteanv@gmail.com> + */ +#ifndef _SJA1105_STATIC_CONFIG_H +#define _SJA1105_STATIC_CONFIG_H + +#include <linux/packing.h> +#include <linux/types.h> +#include <asm/types.h> + +#define SJA1105_SIZE_DEVICE_ID 4 +#define SJA1105_SIZE_TABLE_HEADER 12 +#define SJA1105_SIZE_L2_POLICING_ENTRY 8 +#define SJA1105_SIZE_VLAN_LOOKUP_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_ENTRY 8 +#define SJA1105_SIZE_L2_FORWARDING_PARAMS_ENTRY 12 +#define SJA1105_SIZE_XMII_PARAMS_ENTRY 4 +#define SJA1105ET_SIZE_L2_LOOKUP_ENTRY 12 +#define SJA1105ET_SIZE_MAC_CONFIG_ENTRY 28 +#define SJA1105ET_SIZE_L2_LOOKUP_PARAMS_ENTRY 4 +#define SJA1105ET_SIZE_GENERAL_PARAMS_ENTRY 40 +#define SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY 20 +#define SJA1105PQRS_SIZE_MAC_CONFIG_ENTRY 32 +#define SJA1105PQRS_SIZE_L2_LOOKUP_PARAMS_ENTRY 16 +#define SJA1105PQRS_SIZE_GENERAL_PARAMS_ENTRY 44 + +/* UM10944.pdf Page 11, Table 2. Configuration Blocks */ +enum { + BLKID_L2_LOOKUP = 0x05, + BLKID_L2_POLICING = 0x06, + BLKID_VLAN_LOOKUP = 0x07, + BLKID_L2_FORWARDING = 0x08, + BLKID_MAC_CONFIG = 0x09, + BLKID_L2_LOOKUP_PARAMS = 0x0D, + BLKID_L2_FORWARDING_PARAMS = 0x0E, + BLKID_GENERAL_PARAMS = 0x11, + BLKID_XMII_PARAMS = 0x4E, +}; + +enum sja1105_blk_idx { + BLK_IDX_L2_LOOKUP = 0, + BLK_IDX_L2_POLICING, + BLK_IDX_VLAN_LOOKUP, + BLK_IDX_L2_FORWARDING, + BLK_IDX_MAC_CONFIG, + BLK_IDX_L2_LOOKUP_PARAMS, + BLK_IDX_L2_FORWARDING_PARAMS, + BLK_IDX_GENERAL_PARAMS, + BLK_IDX_XMII_PARAMS, + BLK_IDX_MAX, + /* Fake block indices that are only valid for dynamic access */ + BLK_IDX_MGMT_ROUTE, + BLK_IDX_MAX_DYN, + BLK_IDX_INVAL = -1, +}; + +#define SJA1105_MAX_L2_LOOKUP_COUNT 1024 +#define SJA1105_MAX_L2_POLICING_COUNT 45 +#define SJA1105_MAX_VLAN_LOOKUP_COUNT 4096 +#define SJA1105_MAX_L2_FORWARDING_COUNT 13 +#define SJA1105_MAX_MAC_CONFIG_COUNT 5 +#define SJA1105_MAX_L2_LOOKUP_PARAMS_COUNT 1 +#define SJA1105_MAX_L2_FORWARDING_PARAMS_COUNT 1 +#define SJA1105_MAX_GENERAL_PARAMS_COUNT 1 +#define SJA1105_MAX_XMII_PARAMS_COUNT 1 + +#define SJA1105_MAX_FRAME_MEMORY 929 + +#define SJA1105E_DEVICE_ID 0x9C00000Cull +#define SJA1105T_DEVICE_ID 0x9E00030Eull +#define SJA1105PR_DEVICE_ID 0xAF00030Eull +#define SJA1105QS_DEVICE_ID 0xAE00030Eull + +#define SJA1105ET_PART_NO 0x9A83 +#define SJA1105P_PART_NO 0x9A84 +#define SJA1105Q_PART_NO 0x9A85 +#define SJA1105R_PART_NO 0x9A86 +#define SJA1105S_PART_NO 0x9A87 + +struct sja1105_general_params_entry { + u64 vllupformat; + u64 mirr_ptacu; + u64 switchid; + u64 hostprio; + u64 mac_fltres1; + u64 mac_fltres0; + u64 mac_flt1; + u64 mac_flt0; + u64 incl_srcpt1; + u64 incl_srcpt0; + u64 send_meta1; + u64 send_meta0; + u64 casc_port; + u64 host_port; + u64 mirr_port; + u64 vlmarker; + u64 vlmask; + u64 tpid; + u64 ignore2stf; + u64 tpid2; + /* P/Q/R/S only */ + u64 queue_ts; + u64 egrmirrvid; + u64 egrmirrpcp; + u64 egrmirrdei; + u64 replay_port; +}; + +struct sja1105_vlan_lookup_entry { + u64 ving_mirr; + u64 vegr_mirr; + u64 vmemb_port; + u64 vlan_bc; + u64 tag_port; + u64 vlanid; +}; + +struct sja1105_l2_lookup_entry { + u64 vlanid; + u64 macaddr; + u64 destports; + u64 enfport; + u64 index; +}; + +struct sja1105_l2_lookup_params_entry { + u64 maxage; /* Shared */ + u64 dyn_tbsz; /* E/T only */ + u64 poly; /* E/T only */ + u64 shared_learn; /* Shared */ + u64 no_enf_hostprt; /* Shared */ + u64 no_mgmt_learn; /* Shared */ +}; + +struct sja1105_l2_forwarding_entry { + u64 bc_domain; + u64 reach_port; + u64 fl_domain; + u64 vlan_pmap[8]; +}; + +struct sja1105_l2_forwarding_params_entry { + u64 max_dynp; + u64 part_spc[8]; +}; + +struct sja1105_l2_policing_entry { + u64 sharindx; + u64 smax; + u64 rate; + u64 maxlen; + u64 partition; +}; + +struct sja1105_mac_config_entry { + u64 top[8]; + u64 base[8]; + u64 enabled[8]; + u64 ifg; + u64 speed; + u64 tp_delin; + u64 tp_delout; + u64 maxage; + u64 vlanprio; + u64 vlanid; + u64 ing_mirr; + u64 egr_mirr; + u64 drpnona664; + u64 drpdtag; + u64 drpuntag; + u64 retag; + u64 dyn_learn; + u64 egress; + u64 ingress; +}; + +struct sja1105_xmii_params_entry { + u64 phy_mac[5]; + u64 xmii_mode[5]; +}; + +struct sja1105_table_header { + u64 block_id; + u64 len; + u64 crc; +}; + +struct sja1105_table_ops { + size_t (*packing)(void *buf, void *entry_ptr, enum packing_op op); + size_t unpacked_entry_size; + size_t packed_entry_size; + size_t max_entry_count; +}; + +struct sja1105_table { + const struct sja1105_table_ops *ops; + size_t entry_count; + void *entries; +}; + +struct sja1105_static_config { + u64 device_id; + struct sja1105_table tables[BLK_IDX_MAX]; +}; + +extern struct sja1105_table_ops sja1105e_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105t_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105p_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105q_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105r_table_ops[BLK_IDX_MAX]; +extern struct sja1105_table_ops sja1105s_table_ops[BLK_IDX_MAX]; + +size_t sja1105_table_header_packing(void *buf, void *hdr, enum packing_op op); +void +sja1105_table_header_pack_with_crc(void *buf, struct sja1105_table_header *hdr); +size_t +sja1105_static_config_get_length(const struct sja1105_static_config *config); + +typedef enum { + SJA1105_CONFIG_OK = 0, + SJA1105_MISSING_L2_POLICING_TABLE, + SJA1105_MISSING_L2_FORWARDING_TABLE, + SJA1105_MISSING_L2_FORWARDING_PARAMS_TABLE, + SJA1105_MISSING_GENERAL_PARAMS_TABLE, + SJA1105_MISSING_VLAN_TABLE, + SJA1105_MISSING_XMII_TABLE, + SJA1105_MISSING_MAC_TABLE, + SJA1105_OVERCOMMITTED_FRAME_MEMORY, +} sja1105_config_valid_t; + +extern const char *sja1105_static_config_error_msg[]; + +sja1105_config_valid_t +sja1105_static_config_check_valid(const struct sja1105_static_config *config); +void +sja1105_static_config_pack(void *buf, struct sja1105_static_config *config); +int sja1105_static_config_init(struct sja1105_static_config *config, + const struct sja1105_table_ops *static_ops, + u64 device_id); +void sja1105_static_config_free(struct sja1105_static_config *config); + +u32 sja1105_crc32(const void *buf, size_t len); + +void sja1105_pack(void *buf, const u64 *val, int start, int end, size_t len); +void sja1105_unpack(const void *buf, u64 *val, int start, int end, size_t len); +void sja1105_packing(void *buf, u64 *val, int start, int end, + size_t len, enum packing_op op); + +#endif diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h new file mode 100644 index 000000000000..30559d1d0e1b --- /dev/null +++ b/include/linux/dsa/sja1105.h @@ -0,0 +1,19 @@ +/* SPDX-License-Identifier: GPL-2.0 + * Copyright (c) 2019, Vladimir Oltean <olteanv@gmail.com> + */ + +/* Included by drivers/net/dsa/sja1105/sja1105.h */ + +#ifndef _NET_DSA_SJA1105_H +#define _NET_DSA_SJA1105_H + +/* The switch can only be convinced to stay in unmanaged mode and not trap any + * link-local traffic by actually telling it to filter frames sent at the + * 00:00:00:00:00:00 destination MAC. + */ +#define SJA1105_LINKLOCAL_FILTER_A 0x000000000000ull +#define SJA1105_LINKLOCAL_FILTER_A_MASK 0xFFFFFFFFFFFFull +#define SJA1105_LINKLOCAL_FILTER_B 0x000000000000ull +#define SJA1105_LINKLOCAL_FILTER_B_MASK 0xFFFFFFFFFFFFull + +#endif /* _NET_DSA_SJA1105_H */ |