diff options
| author | Linus Torvalds | 2015-06-26 15:53:22 -0700 |
|---|---|---|
| committer | Linus Torvalds | 2015-06-26 15:53:22 -0700 |
| commit | 8c7febe83915332276cab49e89f6580bb963fb9a (patch) | |
| tree | c6ffa5fbdef402f8c6e2d75b19dcce813fd21ded | |
| parent | 23908db413eccd77084b09c9b0a4451dfb0524c0 (diff) | |
| parent | 71206b9f8120eb513c621d4f31906577bb658df3 (diff) | |
Merge tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver updates from Greg KH:
"Here's the tty and serial driver patches for 4.2-rc1.
A number of individual driver updates, some code cleanups, and other
minor things, full details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'tty-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (152 commits)
Doc: serial-rs485.txt: update RS485 driver interface
Doc: tty.txt: remove mention of the BKL
MAINTAINERS: tty: add serial docs directory
serial: sprd: check for NULL after calling devm_clk_get
serial: 8250_pci: Correct uartclk for xr17v35x expansion chips
serial: 8250_pci: Add support for 12 port Exar boards
serial: 8250_uniphier: add bindings document for UniPhier UART
serial: core: cleanup in uart_get_baud_rate()
serial: stm32-usart: Add STM32 USART Driver
tty/serial: kill off set_irq_flags usage
tty: move linux/gsmmux.h to uapi
doc: dt: add documentation for nxp,lpc1850-uart
serial: 8250: add LPC18xx/43xx UART driver
serial: 8250_uniphier: add UniPhier serial driver
serial: 8250_dw: support ACPI platforms with integrated DMA engine
serial: of_serial: check the return value of clk_prepare_enable()
serial: of_serial: use devm_clk_get() instead of clk_get()
serial: earlycon: Add support for big-endian MMIO accesses
serial: sirf: use hrtimer for data rx
serial: sirf: correct the fifo empty_bit
...
97 files changed, 3233 insertions, 1802 deletions
diff --git a/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt new file mode 100644 index 000000000000..4163e7eb7763 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/arm_sbsa_uart.txt @@ -0,0 +1,10 @@ +* ARM SBSA defined generic UART +This UART uses a subset of the PL011 registers and consequently lives +in the PL011 driver. It's baudrate and other communication parameters +cannot be adjusted at runtime, so it lacks a clock specifier here. + +Required properties: +- compatible: must be "arm,sbsa-uart" +- reg: exactly one register range +- interrupts: exactly one interrupt specifier +- current-speed: the (fixed) baud rate set by the firmware diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt index 44152261e5c5..8d63f1da07aa 100644 --- a/Documentation/devicetree/bindings/serial/mtk-uart.txt +++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt @@ -14,7 +14,14 @@ Required properties: - interrupts: A single interrupt specifier. -- clocks: Clock driving the hardware. +- clocks : Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: + - "baud": The clock the baudrate is derived from + - "bus": The bus clock for register accesses (optional) + +For compatibility with older device trees an unnamed clock is used for the +baud clock if the baudclk does not exist. Do not use this for new designs. Example: @@ -22,5 +29,6 @@ Example: compatible = "mediatek,mt6589-uart", "mediatek,mt6577-uart"; reg = <0x11006000 0x400>; interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>; - clocks = <&uart_clk>; + clocks = <&uart_clk>, <&bus_clk>; + clock-names = "baud", "bus"; }; diff --git a/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt new file mode 100644 index 000000000000..04e23e63ee4f --- /dev/null +++ b/Documentation/devicetree/bindings/serial/nxp,lpc1850-uart.txt @@ -0,0 +1,28 @@ +* NXP LPC1850 UART + +Required properties: +- compatible : "nxp,lpc1850-uart", "ns16550a". +- reg : offset and length of the register set for the device. +- interrupts : should contain uart interrupt. +- clocks : phandle to the input clocks. +- clock-names : required elements: "uartclk", "reg". + +Optional properties: +- dmas : Two or more DMA channel specifiers following the + convention outlined in bindings/dma/dma.txt +- dma-names : Names for the dma channels, if present. There must + be at least one channel named "tx" for transmit + and named "rx" for receive. + +Since it's also possible to also use the of_serial.c driver all +parameters from 8250.txt also apply but are optional. + +Example: +uart0: serial@40081000 { + compatible = "nxp,lpc1850-uart", "ns16550a"; + reg = <0x40081000 0x1000>; + reg-shift = <2>; + interrupts = <24>; + clocks = <&ccu2 CLK_APB0_UART0>, <&ccu1 CLK_CPU_UART0>; + clock-names = "uartclk", "reg"; +}; diff --git a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt index 246c795668dc..fbfe53635a3a 100644 --- a/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt +++ b/Documentation/devicetree/bindings/serial/nxp,sc16is7xx.txt @@ -1,4 +1,5 @@ * NXP SC16IS7xx advanced Universal Asynchronous Receiver-Transmitter (UART) +* i2c as bus Required properties: - compatible: Should be one of the following: @@ -31,3 +32,39 @@ Example: gpio-controller; #gpio-cells = <2>; }; + +* spi as bus + +Required properties: +- compatible: Should be one of the following: + - "nxp,sc16is740" for NXP SC16IS740, + - "nxp,sc16is741" for NXP SC16IS741, + - "nxp,sc16is750" for NXP SC16IS750, + - "nxp,sc16is752" for NXP SC16IS752, + - "nxp,sc16is760" for NXP SC16IS760, + - "nxp,sc16is762" for NXP SC16IS762. +- reg: SPI chip select number. +- interrupt-parent: The phandle for the interrupt controller that + services interrupts for this IC. +- interrupts: Specifies the interrupt source of the parent interrupt + controller. The format of the interrupt specifier depends on the + parent interrupt controller. +- clocks: phandle to the IC source clock. + +Optional properties: +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be two. The first cell is the GPIO number and + the second cell is used to specify the GPIO polarity: + 0 = active high, + 1 = active low. + +Example: + sc16is750: sc16is750@0 { + compatible = "nxp,sc16is750"; + reg = <0>; + clocks = <&clk20m>; + interrupt-parent = <&gpio3>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 7534d46e9ad8..e84b13a8eda3 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -45,6 +45,11 @@ Required properties: Note: Each enabled SCIx UART should have an alias correctly numbered in the "aliases" node. +Optional properties: + - dmas: Must contain a list of two references to DMA specifiers, one for + transmission, and one for reception. + - dma-names: Must contain a list of two DMA names, "tx" and "rx". + Example: aliases { serial0 = &scifa0; @@ -57,4 +62,6 @@ Example: interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp2_clks R8A7790_CLK_SCIFA0>; clock-names = "sci_ick"; + dmas = <&dmac0 0x21>, <&dmac0 0x22>; + dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/serial/sirf-uart.txt b/Documentation/devicetree/bindings/serial/sirf-uart.txt index f0c39261c5d4..67e2a0aeb042 100644 --- a/Documentation/devicetree/bindings/serial/sirf-uart.txt +++ b/Documentation/devicetree/bindings/serial/sirf-uart.txt @@ -2,8 +2,7 @@ Required properties: - compatible : Should be "sirf,prima2-uart", "sirf, prima2-usp-uart", - "sirf,atlas7-uart" or "sirf,atlas7-bt-uart" which means - uart located in BT module and used for BT. + "sirf,atlas7-uart" or "sirf,atlas7-usp-uart". - reg : Offset and length of the register set for the device - interrupts : Should contain uart interrupt - fifosize : Should define hardware rx/tx fifo size @@ -33,15 +32,3 @@ usp@b0090000 { rts-gpios = <&gpio 15 0>; cts-gpios = <&gpio 46 0>; }; - -for uart use in BT module, -uart6: uart@11000000 { - cell-index = <6>; - compatible = "sirf,atlas7-bt-uart", "sirf,atlas7-uart"; - reg = <0x11000000 0x1000>; - interrupts = <0 100 0>; - clocks = <&clks 138>, <&clks 140>, <&clks 141>; - clock-names = "uart", "general", "noc"; - fifosize = <128>; - status = "disabled"; -} diff --git a/Documentation/devicetree/bindings/serial/uniphier-uart.txt b/Documentation/devicetree/bindings/serial/uniphier-uart.txt new file mode 100644 index 000000000000..0b3892a7a528 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/uniphier-uart.txt @@ -0,0 +1,23 @@ +UniPhier UART controller + +Required properties: +- compatible: should be "socionext,uniphier-uart". +- reg: offset and length of the register set for the device. +- interrupts: a single interrupt specifier. +- clocks: phandle to the input clock. + +Optional properties: +- fifo-size: the RX/TX FIFO size. Defaults to 64 if not specified. + +Example: + aliases { + serial0 = &serial0; + }; + + serial0: serial@54006800 { + compatible = "socionext,uniphier-uart"; + reg = <0x54006800 0x40>; + interrupts = <0 33 4>; + clocks = <&uart_clk>; + fifo-size = <64>; + }; diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 1e18efe3a4ed..8bb54c95cece 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -972,14 +972,15 @@ bytes respectively. Such letter suffixes can also be entirely omitted. uart[8250],io,<addr>[,options] uart[8250],mmio,<addr>[,options] uart[8250],mmio32,<addr>[,options] + uart[8250],mmio32be,<addr>[,options] uart[8250],0x<addr>[,options] Start an early, polled-mode console on the 8250/16550 UART at the specified I/O port or MMIO address. MMIO inter-register address stride is either 8-bit - (mmio) or 32-bit (mmio32). - If none of [io|mmio|mmio32], <addr> is assumed to be - equivalent to 'mmio'. 'options' are specified in the - same format described for "console=ttyS<n>"; if + (mmio) or 32-bit (mmio32 or mmio32be). + If none of [io|mmio|mmio32|mmio32be], <addr> is assumed + to be equivalent to 'mmio'. 'options' are specified + in the same format described for "console=ttyS<n>"; if unspecified, the h/w is not initialized. pl011,<addr> diff --git a/Documentation/serial/serial-rs485.txt b/Documentation/serial/serial-rs485.txt index 39dac95422a3..2253b8b45a74 100644 --- a/Documentation/serial/serial-rs485.txt +++ b/Documentation/serial/serial-rs485.txt @@ -33,50 +33,10 @@ the values given by the device tree. Any driver for devices capable of working both as RS232 and RS485 should - provide at least the following ioctls: - - - TIOCSRS485 (typically associated with number 0x542F). This ioctl is used - to enable/disable RS485 mode from user-space - - - TIOCGRS485 (typically associated with number 0x542E). This ioctl is used - to get RS485 mode from kernel-space (i.e., driver) to user-space. - - In other words, the serial driver should contain a code similar to the next - one: - - static struct uart_ops atmel_pops = { - /* ... */ - .ioctl = handle_ioctl, - }; - - static int handle_ioctl(struct uart_port *port, - unsigned int cmd, - unsigned long arg) - { - struct serial_rs485 rs485conf; - - switch (cmd) { - case TIOCSRS485: - if (copy_from_user(&rs485conf, - (struct serial_rs485 *) arg, - sizeof(rs485conf))) - return -EFAULT; - - /* ... */ - break; - - case TIOCGRS485: - if (copy_to_user((struct serial_rs485 *) arg, - ..., - sizeof(rs485conf))) - return -EFAULT; - /* ... */ - break; - - /* ... */ - } - } - + implement the rs485_config callback in the uart_port structure. The + serial_core calls rs485_config to do the device specific part in response + to TIOCSRS485 and TIOCGRS485 ioctls (see below). The rs485_config callback + receives a pointer to struct serial_rs485. 4. USAGE FROM USER-LEVEL @@ -85,7 +45,7 @@ #include <linux/serial.h> - /* Driver-specific ioctls: */ + /* RS485 ioctls: */ #define TIOCGRS485 0x542E #define TIOCSRS485 0x542F diff --git a/Documentation/serial/tty.txt b/Documentation/serial/tty.txt index dbe6623fed1c..973c8ad3f959 100644 --- a/Documentation/serial/tty.txt +++ b/Documentation/serial/tty.txt @@ -4,9 +4,6 @@ Your guide to the ancient and twisted locking policies of the tty layer and the warped logic behind them. Beware all ye who read on. -FIXME: still need to work out the full set of BKL assumptions and document -them so they can eventually be killed off. - Line Discipline --------------- diff --git a/MAINTAINERS b/MAINTAINERS index 35c5d7223b8c..df6007824715 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -10316,6 +10316,7 @@ M: Greg Kroah-Hartman <gregkh@linuxfoundation.org> M: Jiri Slaby <jslaby@suse.cz> S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git +F: Documentation/serial/ F: drivers/tty/ F: drivers/tty/serial/serial_core.c F: include/linux/serial_core.h diff --git a/arch/alpha/include/asm/serial.h b/arch/alpha/include/asm/serial.h index 9d263e8d8ccc..22909b83f473 100644 --- a/arch/alpha/include/asm/serial.h +++ b/arch/alpha/include/asm/serial.h @@ -13,7 +13,7 @@ #define BASE_BAUD ( 1843200 / 16 ) /* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) #define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) #else diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 5662a872689b..873dbfcc7dc9 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1350,6 +1350,9 @@ void edma_stop(unsigned channel) edma_shadow0_write_array(ctlr, SH_SECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); + /* clear possibly pending completion interrupt */ + edma_shadow0_write_array(ctlr, SH_ICR, j, mask); + pr_debug("EDMA: EER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_EER, j)); diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h index d00d732784b1..b550ada7321b 100644 --- a/arch/blackfin/include/asm/bfin_serial.h +++ b/arch/blackfin/include/asm/bfin_serial.h @@ -22,9 +22,9 @@ defined(CONFIG_BFIN_UART2_CTSRTS) || \ defined(CONFIG_BFIN_UART3_CTSRTS) # if defined(BFIN_UART_BF54X_STYLE) || defined(BFIN_UART_BF60X_STYLE) -# define CONFIG_SERIAL_BFIN_HARD_CTSRTS +# define SERIAL_BFIN_HARD_CTSRTS # else -# define CONFIG_SERIAL_BFIN_CTSRTS +# define SERIAL_BFIN_CTSRTS # endif #endif @@ -50,8 +50,8 @@ struct bfin_serial_port { #elif ANOMALY_05000363 unsigned int anomaly_threshold; #endif -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +#if defined(SERIAL_BFIN_CTSRTS) || \ + defined(SERIAL_BFIN_HARD_CTSRTS) int cts_pin; int rts_pin; #endif diff --git a/arch/m68k/include/asm/serial.h b/arch/m68k/include/asm/serial.h index 7267536adbcc..06d0cb19b4e1 100644 --- a/arch/m68k/include/asm/serial.h +++ b/arch/m68k/include/asm/serial.h @@ -17,7 +17,7 @@ #define BASE_BAUD ( 1843200 / 16 ) /* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) #define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) #else diff --git a/arch/mn10300/include/asm/serial.h b/arch/mn10300/include/asm/serial.h index 23a799293599..c1990218f18c 100644 --- a/arch/mn10300/include/asm/serial.h +++ b/arch/mn10300/include/asm/serial.h @@ -13,7 +13,7 @@ #define _ASM_SERIAL_H /* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ #define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ) #define STD_COM4_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_AUTO_IRQ) #else @@ -21,7 +21,7 @@ #define STD_COM4_FLAGS ASYNC_BOOT_AUTOCONF #endif -#ifdef CONFIG_SERIAL_MANY_PORTS +#ifdef CONFIG_SERIAL_8250_MANY_PORTS #define FOURPORT_FLAGS ASYNC_FOURPORT #define ACCENT_FLAGS 0 #define BOCA_FLAGS 0 diff --git a/arch/x86/include/asm/serial.h b/arch/x86/include/asm/serial.h index 8378b8c9109c..bb658211edad 100644 --- a/arch/x86/include/asm/serial.h +++ b/arch/x86/include/asm/serial.h @@ -11,7 +11,7 @@ #define BASE_BAUD (1843200/16) /* Standard COM flags (except for COM4, because of the 8514 problem) */ -#ifdef CONFIG_SERIAL_DETECT_IRQ +#ifdef CONFIG_SERIAL_8250_DETECT_IRQ # define STD_COMX_FLAGS (UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ) # define STD_COM4_FLAGS (UPF_BOOT_AUTOCONF | 0 | UPF_AUTO_IRQ) #else diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index bf09db7ca9ee..88853af69489 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -300,8 +300,7 @@ static int edma_dma_pause(struct dma_chan *chan) { struct edma_chan *echan = to_edma_chan(chan); - /* Pause/Resume only allowed with cyclic mode */ - if (!echan->edesc || !echan->edesc->cyclic) + if (!echan->edesc) return -EINVAL; edma_pause(echan->ch_num); @@ -312,10 +311,6 @@ static int edma_dma_resume(struct dma_chan *chan) { struct edma_chan *echan = to_edma_chan(chan); - /* Pause/Resume only allowed with cyclic mode */ - if (!echan->edesc->cyclic) - return -EINVAL; - edma_resume(echan->ch_num); return 0; } diff --git a/drivers/input/serio/serport.c b/drivers/input/serio/serport.c index 69175b825346..9c927d35c1f5 100644 --- a/drivers/input/serio/serport.c +++ b/drivers/input/serio/serport.c @@ -167,7 +167,6 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u { struct serport *serport = (struct serport*) tty->disc_data; struct serio *serio; - char name[64]; if (test_and_set_bit(SERPORT_BUSY, &serport->flags)) return -EBUSY; @@ -177,7 +176,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u return -ENOMEM; strlcpy(serio->name, "Serial port", sizeof(serio->name)); - snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty, name)); + snprintf(serio->phys, sizeof(serio->phys), "%s/serio0", tty_name(tty)); serio->id = serport->id; serio->id.type = SERIO_RS232; serio->write = serport_serio_write; @@ -187,7 +186,7 @@ static ssize_t serport_ldisc_read(struct tty_struct * tty, struct file * file, u serio->dev.parent = tty->dev; serio_register_port(serport->serio); - printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty, name)); + printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty)); wait_event_interruptible(serport->wait, test_bit(SERPORT_DEAD, &serport->flags)); serio_unregister_port(serport->serio); diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c index b2d760055952..e53d9a512c6d 100644 --- a/drivers/tty/amiserial.c +++ b/drivers/tty/amiserial.c @@ -966,9 +966,7 @@ static void rs_throttle(struct tty_struct * tty) struct serial_state *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), + printk("throttle %s: %d....\n", tty_name(tty), tty->ldisc.chars_in_buffer(tty)); #endif @@ -991,9 +989,7 @@ static void rs_unthrottle(struct tty_struct * tty) struct serial_state *info = tty->driver_data; unsigned long flags; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %d....\n", tty_name(tty, buf), + printk("unthrottle %s: %d....\n", tty_name(tty), tty->ldisc.chars_in_buffer(tty)); #endif @@ -1786,7 +1782,8 @@ static int __exit amiga_serial_remove(struct platform_device *pdev) struct serial_state *state = platform_get_drvdata(pdev); /* printk("Unloading %s: version %s\n", serial_name, serial_version); */ - if ((error = tty_unregister_driver(serial_driver))) + error = tty_unregister_driver(serial_driver); + if (error) printk("SERIAL: failed to unregister serial driver (%d)\n", error); put_tty_driver(serial_driver); diff --git a/drivers/tty/cyclades.c b/drivers/tty/cyclades.c index fd66f57390d0..87f6578c6f4a 100644 --- a/drivers/tty/cyclades.c +++ b/drivers/tty/cyclades.c @@ -2861,9 +2861,7 @@ static void cy_throttle(struct tty_struct *tty) unsigned long flags; #ifdef CY_DEBUG_THROTTLE - char buf[64]; - - printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty, buf), + printk(KERN_DEBUG "cyc:throttle %s: %ld...ttyC%d\n", tty_name(tty), tty->ldisc.chars_in_buffer(tty), info->line); #endif @@ -2902,10 +2900,8 @@ static void cy_unthrottle(struct tty_struct *tty) unsigned long flags; #ifdef CY_DEBUG_THROTTLE - char buf[64]; - printk(KERN_DEBUG "cyc:unthrottle %s: %ld...ttyC%d\n", - tty_name(tty, buf), tty_chars_in_buffer(tty), info->line); + tty_name(tty), tty_chars_in_buffer(tty), info->line); #endif if (serial_paranoia_check(info, tty->name, "cy_unthrottle")) diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig index 8902f9b4df71..2509d057b99c 100644 --- a/drivers/tty/hvc/Kconfig +++ b/drivers/tty/hvc/Kconfig @@ -42,13 +42,6 @@ config HVC_RTAS help IBM Console device driver which makes use of RTAS -config HVC_BEAT - bool "Toshiba's Beat Hypervisor Console support" - depends on PPC_CELLEB - select HVC_DRIVER - help - Toshiba's Cell Reference Set Beat Console device driver - config HVC_IUCV bool "z/VM IUCV Hypervisor console support (VM only)" depends on S390 diff --git a/drivers/tty/hvc/Makefile b/drivers/tty/hvc/Makefile index 4ca3723b0a3a..6a2702be76d1 100644 --- a/drivers/tty/hvc/Makefile +++ b/drivers/tty/hvc/Makefile @@ -4,7 +4,6 @@ obj-$(CONFIG_HVC_OLD_HVSI) += hvsi.o obj-$(CONFIG_HVC_RTAS) += hvc_rtas.o obj-$(CONFIG_HVC_TILE) += hvc_tile.o obj-$(CONFIG_HVC_DCC) += hvc_dcc.o -obj-$(CONFIG_HVC_BEAT) += hvc_beat.o obj-$(CONFIG_HVC_DRIVER) += hvc_console.o obj-$(CONFIG_HVC_IRQ) += hvc_irq.o obj-$(CONFIG_HVC_XEN) += hvc_xen.o diff --git a/drivers/tty/hvc/hvc_beat.c b/drivers/tty/hvc/hvc_beat.c deleted file mode 100644 index 1560d235449e..000000000000 --- a/drivers/tty/hvc/hvc_beat.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * Beat hypervisor console driver - * - * (C) Copyright 2006 TOSHIBA CORPORATION - * - * This code is based on drivers/char/hvc_rtas.c: - * (C) Copyright IBM Corporation 2001-2005 - * (C) Copyright Red Hat, Inc. 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/string.h> -#include <linux/console.h> -#include <asm/prom.h> -#include <asm/hvconsole.h> -#include <asm/firmware.h> - -#include "hvc_console.h" - -extern int64_t beat_get_term_char(uint64_t, uint64_t *, uint64_t *, uint64_t *); -extern int64_t beat_put_term_char(uint64_t, uint64_t, uint64_t, uint64_t); - -struct hvc_struct *hvc_beat_dev = NULL; - -/* bug: only one queue is available regardless of vtermno */ -static int hvc_beat_get_chars(uint32_t vtermno, char *buf, int cnt) -{ - static unsigned char q[sizeof(unsigned long) * 2] - __attribute__((aligned(sizeof(unsigned long)))); - static int qlen = 0; - u64 got; - -again: - if (qlen) { - if (qlen > cnt) { - memcpy(buf, q, cnt); - qlen -= cnt; - memmove(q + cnt, q, qlen); - return cnt; - } else { /* qlen <= cnt */ - int r; - - memcpy(buf, q, qlen); - r = qlen; - qlen = 0; - return r; - } - } - if (beat_get_term_char(vtermno, &got, - ((u64 *)q), ((u64 *)q) + 1) == 0) { - qlen = got; - goto again; - } - return 0; -} - -static int hvc_beat_put_chars(uint32_t vtermno, const char *buf, int cnt) -{ - unsigned long kb[2]; - int rest, nlen; - - for (rest = cnt; rest > 0; rest -= nlen) { - nlen = (rest > 16) ? 16 : rest; - memcpy(kb, buf, nlen); - beat_put_term_char(vtermno, nlen, kb[0], kb[1]); - buf += nlen; - } - return cnt; -} - -static const struct hv_ops hvc_beat_get_put_ops = { - .get_chars = hvc_beat_get_chars, - .put_chars = hvc_beat_put_chars, -}; - -static int hvc_beat_useit = 1; - -static int hvc_beat_config(char *p) -{ - hvc_beat_useit = simple_strtoul(p, NULL, 0); - return 0; -} - -static int __init hvc_beat_console_init(void) -{ - if (hvc_beat_useit && of_machine_is_compatible("Beat")) { - hvc_instantiate(0, 0, &hvc_beat_get_put_ops); - } - return 0; -} - -/* temp */ -static int __init hvc_beat_init(void) -{ - struct hvc_struct *hp; - - if (!firmware_has_feature(FW_FEATURE_BEAT)) - return -ENODEV; - - hp = hvc_alloc(0, 0, &hvc_beat_get_put_ops, 16); - if (IS_ERR(hp)) - return PTR_ERR(hp); - hvc_beat_dev = hp; - return 0; -} - -static void __exit hvc_beat_exit(void) -{ - if (hvc_beat_dev) - hvc_remove(hvc_beat_dev); -} - -module_init(hvc_beat_init); -module_exit(hvc_beat_exit); - -__setup("hvc_beat=", hvc_beat_config); - -console_initcall(hvc_beat_console_init); diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index 4fcec1d793a7..4e9c4cc9e1b5 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -319,7 +319,8 @@ static int hvc_install(struct tty_driver *driver, struct tty_struct *tty) int rc; /* Auto increments kref reference if found. */ - if (!(hp = hvc_get_by_index(tty->index))) + hp = hvc_get_by_index(tty->index); + if (!hp) return -ENODEV; tty->driver_data = hp; diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c index 81ff7e1bfb1a..f7ff97c0ad34 100644 --- a/drivers/tty/hvc/hvcs.c +++ b/drivers/tty/hvc/hvcs.c @@ -1044,8 +1044,8 @@ static int hvcs_enable_device(struct hvcs_struct *hvcsd, uint32_t unit_address, * It is possible that the vty-server was removed between the time that * the conn was registered and now. */ - if (!(rc = request_irq(irq, &hvcs_handle_interrupt, - 0, "ibmhvcs", hvcsd))) { + rc = request_irq(irq, &hvcs_handle_interrupt, 0, "ibmhvcs", hvcsd); + if (!rc) { /* * It is possible the vty-server was removed after the irq was * requested but before we have time to enable interrupts. diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 2c34c3249972..382d3fcba6cc 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -161,7 +161,7 @@ struct gsm_dlci { struct net_device *net; /* network interface, if created */ }; -/* DLCI 0, 62/63 are special or reseved see gsmtty_open */ +/* DLCI 0, 62/63 are special or reserved see gsmtty_open */ #define NUM_DLCI 64 @@ -2274,7 +2274,6 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, const unsigned char *dp; char *f; int i; - char buf[64]; char flags = TTY_NORMAL; if (debug & 4) @@ -2296,7 +2295,7 @@ static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp, break; default: WARN_ONCE(1, "%s: unknown flag %d\n", - tty_name(tty, buf), flags); + tty_name(tty), flags); break; } } diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 396344cb011f..c9c27f69e101 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1190,13 +1190,12 @@ static void n_tty_receive_break(struct tty_struct *tty) static void n_tty_receive_overrun(struct tty_struct *tty) { struct n_tty_data *ldata = tty->disc_data; - char buf[64]; ldata->num_overrun++; if (time_after(jiffies, ldata->overrun_time + HZ) || time_after(ldata->overrun_time, jiffies)) { printk(KERN_WARNING "%s: %d input overrun(s)\n", - tty_name(tty, buf), + tty_name(tty), ldata->num_overrun); ldata->overrun_time = jiffies; ldata->num_overrun = 0; @@ -1471,8 +1470,6 @@ static void n_tty_receive_char_closing(struct tty_struct *tty, unsigned char c) static void n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) { - char buf[64]; - switch (flag) { case TTY_BREAK: n_tty_receive_break(tty); @@ -1486,7 +1483,7 @@ n_tty_receive_char_flagged(struct tty_struct *tty, unsigned char c, char flag) break; default: printk(KERN_ERR "%s: unknown flag %d\n", - tty_name(tty, buf), flag); + tty_name(tty), flag); break; } } diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c index 74885af8c7bd..80f9de907563 100644 --- a/drivers/tty/nozomi.c +++ b/drivers/tty/nozomi.c @@ -140,8 +140,8 @@ static int debug; #define R_FCR 0x0000 /* Flow Control Register */ #define R_IER 0x0004 /* Interrupt Enable Register */ -#define CONFIG_MAGIC 0xEFEFFEFE -#define TOGGLE_VALID 0x0000 +#define NOZOMI_CONFIG_MAGIC 0xEFEFFEFE +#define TOGGLE_VALID 0x0000 /* Definition of interrupt tokens */ #define MDM_DL1 0x0001 @@ -660,9 +660,9 @@ static int nozomi_read_config_table(struct nozomi *dc) read_mem32((u32 *) &dc->config_table, dc->base_addr + 0, sizeof(struct config_table)); - if (dc->config_table.signature != CONFIG_MAGIC) { + if (dc->config_table.signature != NOZOMI_CONFIG_MAGIC) { dev_err(&dc->pdev->dev, "ConfigTable Bad! 0x%08X != 0x%08X\n", - dc->config_table.signature, CONFIG_MAGIC); + dc->config_table.signature, NOZOMI_CONFIG_MAGIC); return 0; } diff --git a/drivers/tty/rocket.h b/drivers/tty/rocket.h index ec863f35f1a9..c11a9392f219 100644 --- a/drivers/tty/rocket.h +++ b/drivers/tty/rocket.h @@ -44,7 +44,7 @@ struct rocket_version { #define ROCKET_HUP_NOTIFY 0x00000004 #define ROCKET_SPLIT_TERMIOS 0x00000008 #define ROCKET_SPD_MASK 0x00000070 -#define ROCKET_SPD_HI 0x00000010 /* Use 56000 instead of 38400 bps */ +#define ROCKET_SPD_HI 0x00000010 /* Use 57600 instead of 38400 bps */ #define ROCKET_SPD_VHI 0x00000020 /* Use 115200 instead of 38400 bps */ #define ROCKET_SPD_SHI 0x00000030 /* Use 230400 instead of 38400 bps */ #define ROCKET_SPD_WARP 0x00000040 /* Use 460800 instead of 38400 bps */ diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c index 5dc9c4bfa66e..748c18f8c8cd 100644 --- a/drivers/tty/serial/68328serial.c +++ b/drivers/tty/serial/68328serial.c @@ -508,7 +508,8 @@ static void change_speed(struct m68k_serial *info, struct tty_struct *tty) int i; cflag = tty->termios.c_cflag; - if (!(port = info->port)) + port = info->port; + if (!port) return; ustcnt = uart->ustcnt; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 4506e405c8f3..37fff12dd4d0 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -85,19 +85,6 @@ static unsigned int skip_txen_test; /* force skip of txen test at init time */ #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -#ifdef CONFIG_SERIAL_8250_DETECT_IRQ -#define CONFIG_SERIAL_DETECT_IRQ 1 -#endif -#ifdef CONFIG_SERIAL_8250_MANY_PORTS -#define CONFIG_SERIAL_MANY_PORTS 1 -#endif - -/* - * HUB6 is always on. This will be removed once the header - * files have been cleaned. - */ -#define CONFIG_HUB6 1 - #include <asm/serial.h> /* * SERIAL_PORT_DFNS tells us about built-in ports that have no @@ -2019,8 +2006,9 @@ EXPORT_SYMBOL_GPL(serial8250_do_set_mctrl); static void serial8250_set_mctrl(struct uart_port *port, unsigned int mctrl) { if (port->set_mctrl) - return port->set_mctrl(port, mctrl); - return serial8250_do_set_mctrl(port, mctrl); + port->set_mctrl(port, mctrl); + else + serial8250_do_set_mctrl(port, mctrl); } static void serial8250_break_ctl(struct uart_port *port, int break_state) @@ -3548,6 +3536,9 @@ static struct console univ8250_console = { static int __init univ8250_console_init(void) { + if (nr_uarts == 0) + return -ENODEV; + serial8250_isa_init_ports(); register_console(&univ8250_console); return 0; @@ -3578,7 +3569,7 @@ int __init early_serial_setup(struct uart_port *port) { struct uart_port *p; - if (port->line >= ARRAY_SIZE(serial8250_ports)) + if (port->line >= ARRAY_SIZE(serial8250_ports) || nr_uarts == 0) return -ENODEV; serial8250_isa_init_ports(); @@ -3850,7 +3841,6 @@ int serial8250_register_8250_port(struct uart_8250_port *up) uart->port.mapbase = up->port.mapbase; uart->port.mapsize = up->port.mapsize; uart->port.private_data = up->port.private_data; - uart->port.fifosize = up->port.fifosize; uart->tx_loadsz = up->tx_loadsz; uart->capabilities = up->capabilities; uart->port.throttle = up->port.throttle; @@ -3945,6 +3935,9 @@ static int __init serial8250_init(void) { int ret; + if (nr_uarts == 0) + return -ENODEV; + serial8250_isa_init_ports(); printk(KERN_INFO "Serial: 8250/16550 driver, " diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 176f18f2e3ab..d48b50641e9a 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -377,6 +377,16 @@ static int dw8250_probe_of(struct uart_port *p, return 0; } +static bool dw8250_idma_filter(struct dma_chan *chan, void *param) +{ + struct device *dev = param; + + if (dev != chan->device->dev->parent) + return false; + + return true; +} + static int dw8250_probe_acpi(struct uart_8250_port *up, struct dw8250_data *data) { @@ -389,8 +399,15 @@ static int dw8250_probe_acpi(struct uart_8250_port *up, p->serial_out = dw8250_serial_out32; p->regshift = 2; - up->dma = &data->dma; + /* Platforms with iDMA */ + if (platform_get_resource_byname(to_platform_device(up->port.dev), + IORESOURCE_MEM, "lpss_priv")) { + data->dma.rx_param = up->port.dev->parent; + data->dma.tx_param = up->port.dev->parent; + data->dma.fn = dw8250_idma_filter; + } + up->dma = &data->dma; up->dma->rxconf.src_maxburst = p->fifosize / 4; up->dma->txconf.dst_maxburst = p->fifosize / 4; diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 6c0fd8b9d1c3..771dda29a0f8 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -131,7 +131,7 @@ static void __init init_port(struct earlycon_device *device) serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); } -static int __init early_serial8250_setup(struct earlycon_device *device, +int __init early_serial8250_setup(struct earlycon_device *device, const char *options) { if (!(device->port.membase || device->port.iobase)) diff --git a/drivers/tty/serial/8250/8250_lpc18xx.c b/drivers/tty/serial/8250/8250_lpc18xx.c new file mode 100644 index 000000000000..99cd478851ff --- /dev/null +++ b/drivers/tty/serial/8250/8250_lpc18xx.c @@ -0,0 +1,230 @@ +/* + * Serial port driver for NXP LPC18xx/43xx UART + * + * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> + * + * Based on 8250_mtk.c: + * Copyright (c) 2014 MundoReader S.L. + * Matthias Brugger <matthias.bgg@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include "8250.h" + +/* Additional LPC18xx/43xx 8250 registers and bits */ +#define LPC18XX_UART_RS485CTRL (0x04c / sizeof(u32)) +#define LPC18XX_UART_RS485CTRL_NMMEN BIT(0) +#define LPC18XX_UART_RS485CTRL_DCTRL BIT(4) +#define LPC18XX_UART_RS485CTRL_OINV BIT(5) +#define LPC18XX_UART_RS485DLY (0x054 / sizeof(u32)) +#define LPC18XX_UART_RS485DLY_MAX 255 + +struct lpc18xx_uart_data { + struct uart_8250_dma dma; + struct clk *clk_uart; + struct clk *clk_reg; + int line; +}; + +static int lpc18xx_rs485_config(struct uart_port *port, + struct serial_rs485 *rs485) +{ + struct uart_8250_port *up = up_to_u8250p(port); + u32 rs485_ctrl_reg = 0; + u32 rs485_dly_reg = 0; + unsigned baud_clk; + + if (rs485->flags & SER_RS485_ENABLED) + memset(rs485->padding, 0, sizeof(rs485->padding)); + else + memset(rs485, 0, sizeof(*rs485)); + + rs485->flags &= SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | + SER_RS485_RTS_AFTER_SEND; + + if (rs485->flags & SER_RS485_ENABLED) { + rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_NMMEN | + LPC18XX_UART_RS485CTRL_DCTRL; + + if (rs485->flags & SER_RS485_RTS_ON_SEND) { + rs485_ctrl_reg |= LPC18XX_UART_RS485CTRL_OINV; + rs485->flags &= ~SER_RS485_RTS_AFTER_SEND; + } else { + rs485->flags |= SER_RS485_RTS_AFTER_SEND; + } + } + + if (rs485->delay_rts_after_send) { + baud_clk = port->uartclk / up->dl_read(up); + rs485_dly_reg = DIV_ROUND_UP(rs485->delay_rts_after_send + * baud_clk, MSEC_PER_SEC); + + if (rs485_dly_reg > LPC18XX_UART_RS485DLY_MAX) + rs485_dly_reg = LPC18XX_UART_RS485DLY_MAX; + + /* Calculate the resulting delay in ms */ + rs485->delay_rts_after_send = (rs485_dly_reg * MSEC_PER_SEC) + / baud_clk; + } + + /* Delay RTS before send not supported */ + rs485->delay_rts_before_send = 0; + + serial_out(up, LPC18XX_UART_RS485CTRL, rs485_ctrl_reg); + serial_out(up, LPC18XX_UART_RS485DLY, rs485_dly_reg); + + port->rs485 = *rs485; + + return 0; +} + +static void lpc18xx_uart_serial_out(struct uart_port *p, int offset, int value) +{ + /* + * For DMA mode one must ensure that the UART_FCR_DMA_SELECT + * bit is set when FIFO is enabled. Even if DMA is not used + * setting this bit doesn't seem to affect anything. + */ + if (offset == UART_FCR && (value & UART_FCR_ENABLE_FIFO)) + value |= UART_FCR_DMA_SELECT; + + offset = offset << p->regshift; + writel(value, p->membase + offset); +} + +static int lpc18xx_serial_probe(struct platform_device *pdev) +{ + struct lpc18xx_uart_data *data; + struct uart_8250_port uart; + struct resource *res; + int irq, ret; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "irq not found"); + return irq; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "memory resource not found"); + return -EINVAL; + } + + memset(&uart, 0, sizeof(uart)); + + uart.port.membase = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + if (!uart.port.membase) + return -ENOMEM; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->clk_uart = devm_clk_get(&pdev->dev, "uartclk"); + if (IS_ERR(data->clk_uart)) { + dev_err(&pdev->dev, "uart clock not found\n"); + return PTR_ERR(data->clk_uart); + } + + data->clk_reg = devm_clk_get(&pdev->dev, "reg"); + if (IS_ERR(data->clk_reg)) { + dev_err(&pdev->dev, "reg clock not found\n"); + return PTR_ERR(data->clk_reg); + } + + ret = clk_prepare_enable(data->clk_reg); + if (ret) { + dev_err(&pdev->dev, "unable to enable reg clock\n"); + return ret; + } + + ret = clk_prepare_enable(data->clk_uart); + if (ret) { + dev_err(&pdev->dev, "unable to enable uart clock\n"); + goto dis_clk_reg; + } + + ret = of_alias_get_id(pdev->dev.of_node, "serial"); + if (ret >= 0) + uart.port.line = ret; + + data->dma.rx_param = data; + data->dma.tx_param = data; + + spin_lock_init(&uart.port.lock); + uart.port.dev = &pdev->dev; + uart.port.irq = irq; + uart.port.iotype = UPIO_MEM32; + uart.port.mapbase = res->start; + uart.port.regshift = 2; + uart.port.type = PORT_16550A; + uart.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE | UPF_SKIP_TEST; + uart.port.uartclk = clk_get_rate(data->clk_uart); + uart.port.private_data = data; + uart.port.rs485_config = lpc18xx_rs485_config; + uart.port.serial_out = lpc18xx_uart_serial_out; + + uart.dma = &data->dma; + uart.dma->rxconf.src_maxburst = 1; + uart.dma->txconf.dst_maxburst = 1; + + ret = serial8250_register_8250_port(&uart); + if (ret < 0) { + dev_err(&pdev->dev, "unable to register 8250 port\n"); + goto dis_uart_clk; + } + + data->line = ret; + platform_set_drvdata(pdev, data); + + return 0; + +dis_uart_clk: + clk_disable_unprepare(data->clk_uart); +dis_clk_reg: + clk_disable_unprepare(data->clk_reg); + return ret; +} + +static int lpc18xx_serial_remove(struct platform_device *pdev) +{ + struct lpc18xx_uart_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + clk_disable_unprepare(data->clk_uart); + clk_disable_unprepare(data->clk_reg); + + return 0; +} + +static const struct of_device_id lpc18xx_serial_match[] = { + { .compatible = "nxp,lpc1850-uart" }, + { }, +}; +MODULE_DEVICE_TABLE(of, lpc18xx_serial_match); + +static struct platform_driver lpc18xx_serial_driver = { + .probe = lpc18xx_serial_probe, + .remove = lpc18xx_serial_remove, + .driver = { + .name = "lpc18xx-uart", + .of_match_table = lpc18xx_serial_match, + }, +}; +module_platform_driver(lpc18xx_serial_driver); + +MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>"); +MODULE_DESCRIPTION("Serial port driver NXP LPC18xx/43xx devices"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 7a11fac775c4..78883ca64ddd 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -34,6 +34,7 @@ struct mtk8250_data { int line; struct clk *uart_clk; + struct clk *bus_clk; }; static void @@ -115,6 +116,36 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, tty_termios_encode_baud_rate(termios, baud, baud); } +static int mtk8250_runtime_suspend(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + + clk_disable_unprepare(data->uart_clk); + clk_disable_unprepare(data->bus_clk); + + return 0; +} + +static int mtk8250_runtime_resume(struct device *dev) +{ + struct mtk8250_data *data = dev_get_drvdata(dev); + int err; + + err = clk_prepare_enable(data->uart_clk); + if (err) { + dev_warn(dev, "Can't enable clock\n"); + return err; + } + + err = clk_prepare_enable(data->bus_clk); + if (err) { + dev_warn(dev, "Can't enable bus clock\n"); + return err; + } + + return 0; +} + static void mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) { @@ -130,22 +161,24 @@ mtk8250_do_pm(struct uart_port *port, unsigned int state, unsigned int old) static int mtk8250_probe_of(struct platform_device *pdev, struct uart_port *p, struct mtk8250_data *data) { - int err; - struct device_node *np = pdev->dev.of_node; - - data->uart_clk = of_clk_get(np, 0); + data->uart_clk = devm_clk_get(&pdev->dev, "baud"); if (IS_ERR(data->uart_clk)) { - dev_warn(&pdev->dev, "Can't get timer clock\n"); - return PTR_ERR(data->uart_clk); + /* + * For compatibility with older device trees try unnamed + * clk when no baud clk can be found. + */ + data->uart_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->uart_clk)) { + dev_warn(&pdev->dev, "Can't get uart clock\n"); + return PTR_ERR(data->uart_clk); + } + + return 0; } - err = clk_prepare_enable(data->uart_clk); - if (err) { - dev_warn(&pdev->dev, "Can't prepare clock\n"); - clk_put(data->uart_clk); - return err; - } - p->uartclk = clk_get_rate(data->uart_clk); + data->bus_clk = devm_clk_get(&pdev->dev, "bus"); + if (IS_ERR(data->bus_clk)) + return PTR_ERR(data->bus_clk); return 0; } @@ -190,19 +223,24 @@ static int mtk8250_probe(struct platform_device *pdev) uart.port.regshift = 2; uart.port.private_data = data; uart.port.set_termios = mtk8250_set_termios; + uart.port.uartclk = clk_get_rate(data->uart_clk); /* Disable Rate Fix function */ writel(0x0, uart.port.membase + (MTK_UART_RATE_FIX << uart.port.regshift)); - data->line = serial8250_register_8250_port(&uart); - if (data->line < 0) - return data->line; - platform_set_drvdata(pdev, data); - pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); + if (!pm_runtime_enabled(&pdev->dev)) { + err = mtk8250_runtime_resume(&pdev->dev); + if (err) + return err; + } + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) + return data->line; return 0; } @@ -214,13 +252,13 @@ static int mtk8250_remove(struct platform_device *pdev) pm_runtime_get_sync(&pdev->dev); serial8250_unregister_port(data->line); - if (!IS_ERR(data->uart_clk)) { - clk_disable_unprepare(data->uart_clk); - clk_put(data->uart_clk); - } pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); + + if (!pm_runtime_status_suspended(&pdev->dev)) + mtk8250_runtime_suspend(&pdev->dev); + return 0; } @@ -244,28 +282,6 @@ static int mtk8250_resume(struct device *dev) } #endif /* CONFIG_PM_SLEEP */ -#ifdef CONFIG_PM -static int mtk8250_runtime_suspend(struct device *dev) -{ - struct mtk8250_data *data = dev_get_drvdata(dev); - - if (!IS_ERR(data->uart_clk)) - clk_disable_unprepare(data->uart_clk); - - return 0; -} - -static int mtk8250_runtime_resume(struct device *dev) -{ - struct mtk8250_data *data = dev_get_drvdata(dev); - - if (!IS_ERR(data->uart_clk)) - clk_prepare_enable(data->uart_clk); - - return 0; -} -#endif - static const struct dev_pm_ops mtk8250_pm_ops = { SET_SYSTEM_SLEEP_PM_OPS(mtk8250_suspend, mtk8250_resume) SET_RUNTIME_PM_OPS(mtk8250_runtime_suspend, mtk8250_runtime_resume, @@ -289,6 +305,21 @@ static struct platform_driver mtk8250_platform_driver = { }; module_platform_driver(mtk8250_platform_driver); +#ifdef CONFIG_SERIAL_8250_CONSOLE +static int __init early_mtk8250_setup(struct earlycon_device *device, + const char *options) +{ + if (!device->port.membase) + return -ENODEV; + + device->port.iotype = UPIO_MEM32; + + return early_serial8250_setup(device, NULL); +} + +OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup); +#endif + MODULE_AUTHOR("Matthias Brugger"); MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("Mediatek 8250 serial port driver"); diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index dce1a23706e8..978204333c94 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -98,6 +98,7 @@ struct omap8250_priv { struct pm_qos_request pm_qos_request; struct work_struct qos_work; struct uart_8250_dma omap8250_dma; + spinlock_t rx_dma_lock; }; static u32 uart_read(struct uart_8250_port *up, u32 reg) @@ -726,14 +727,21 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir); static void __dma_rx_do_complete(struct uart_8250_port *p, bool error) { + struct omap8250_priv *priv = p->port.private_data; struct uart_8250_dma *dma = p->dma; struct tty_port *tty_port = &p->port.state->port; struct dma_tx_state state; int count; + unsigned long flags; dma_sync_single_for_cpu(dma->rxchan->device->dev, dma->rx_addr, dma->rx_size, DMA_FROM_DEVICE); + spin_lock_irqsave(&priv->rx_dma_lock, flags); + + if (!dma->rx_running) + goto unlock; + dma->rx_running = 0; dmaengine_tx_status(dma->rxchan, dma->rx_cookie, &state); dmaengine_terminate_all(dma->rxchan); @@ -742,6 +750,9 @@ static void __dma_rx_do_complete(struct uart_8250_port *p, bool error) tty_insert_flip_string(tty_port, dma->rx_buf, count); p->port.icount.rx += count; +unlock: + spin_unlock_irqrestore(&priv->rx_dma_lock, flags); + if (!error) omap_8250_rx_dma(p, 0); @@ -753,28 +764,45 @@ static void __dma_rx_complete(void *param) __dma_rx_do_complete(param, false); } +static void omap_8250_rx_dma_flush(struct uart_8250_port *p) +{ + struct omap8250_priv *priv = p->port.private_data; + struct uart_8250_dma *dma = p->dma; + unsigned long flags; + + spin_lock_irqsave(&priv->rx_dma_lock, flags); + + if (!dma->rx_running) { + spin_unlock_irqrestore(&priv->rx_dma_lock, flags); + return; + } + + dmaengine_pause(dma->rxchan); + + spin_unlock_irqrestore(&priv->rx_dma_lock, flags); + + __dma_rx_do_complete(p, true); +} + static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir) { + struct omap8250_priv *priv = p->port.private_data; struct uart_8250_dma *dma = p->dma; + int err = 0; struct dma_async_tx_descriptor *desc; + unsigned long flags; switch (iir & 0x3f) { case UART_IIR_RLSI: /* 8250_core handles errors and break interrupts */ - if (dma->rx_running) { - dmaengine_pause(dma->rxchan); - __dma_rx_do_complete(p, true); - } + omap_8250_rx_dma_flush(p); return -EIO; case UART_IIR_RX_TIMEOUT: /* * If RCVR FIFO trigger level was not reached, complete the * transfer and let 8250_core copy the remaining data. */ - if (dma->rx_running) { - dmaengine_pause(dma->rxchan); - __dma_rx_do_complete(p, true); - } + omap_8250_rx_dma_flush(p); return -ETIMEDOUT; case UART_IIR_RDI: /* @@ -786,24 +814,25 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir) * the DMA won't do anything soon so we have to cancel the DMA * transfer and purge the FIFO manually. */ - if (dma->rx_running) { - dmaengine_pause(dma->rxchan); - __dma_rx_do_complete(p, true); - } + omap_8250_rx_dma_flush(p); return -ETIMEDOUT; default: break; } + spin_lock_irqsave(&priv->rx_dma_lock, flags); + if (dma->rx_running) - return 0; + goto out; desc = dmaengine_prep_slave_single(dma->rxchan, dma->rx_addr, dma->rx_size, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); - if (!desc) - return -EBUSY; + if (!desc) { + err = -EBUSY; + goto out; + } dma->rx_running = 1; desc->callback = __dma_rx_complete; @@ -815,7 +844,9 @@ static int omap_8250_rx_dma(struct uart_8250_port *p, unsigned int iir) dma->rx_size, DMA_FROM_DEVICE); dma_async_issue_pending(dma->rxchan); - return 0; +out: + spin_unlock_irqrestore(&priv->rx_dma_lock, flags); + return err; } static int omap_8250_tx_dma(struct uart_8250_port *p); @@ -1129,6 +1160,8 @@ static int omap8250_probe(struct platform_device *pdev) priv->latency); INIT_WORK(&priv->qos_work, omap8250_uart_qos_work); + spin_lock_init(&priv->rx_dma_lock); + device_init_wakeup(&pdev->dev, true); pm_runtime_use_autosuspend(&pdev->dev); pm_runtime_set_autosuspend_delay(&pdev->dev, -1); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 46bcebba54b2..e55f18b93fe7 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1823,6 +1823,9 @@ static int pci_eg20t_init(struct pci_dev *dev) #endif } +#define PCI_DEVICE_ID_EXAR_XR17V4358 0x4358 +#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 + static int pci_xr17c154_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -1832,6 +1835,15 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static inline int +xr17v35x_has_slave(struct serial_private *priv) +{ + const int dev_id = priv->dev->device; + + return ((dev_id == PCI_DEVICE_ID_EXAR_XR17V4358) || + (dev_id == PCI_DEVICE_ID_EXAR_XR17V8358)); +} + static int pci_xr17v35x_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -1846,6 +1858,13 @@ pci_xr17v35x_setup(struct serial_private *priv, port->port.flags |= UPF_EXAR_EFR; /* + * Setup the uart clock for the devices on expansion slot to + * half the clock speed of the main chip (which is 125MHz) + */ + if (xr17v35x_has_slave(priv) && idx >= 8) + port->port.uartclk = (7812500 * 16 / 2); + + /* * Setup Multipurpose Input/Output pins. */ if (idx == 0) { @@ -1998,8 +2017,6 @@ pci_wch_ch38x_setup(struct serial_private *priv, #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 -#define PCI_DEVICE_ID_EXAR_XR17V8358 0x8358 - /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 #define PCI_SUBDEVICE_ID_UNKNOWN_0x1588 0x1588 @@ -2524,6 +2541,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { }, { .vendor = PCI_VENDOR_ID_EXAR, + .device = PCI_DEVICE_ID_EXAR_XR17V4358, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = pci_xr17v35x_setup, + }, + { + .vendor = PCI_VENDOR_ID_EXAR, .device = PCI_DEVICE_ID_EXAR_XR17V8358, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, @@ -3008,6 +3032,7 @@ enum pci_board_num_t { pbn_exar_XR17V352, pbn_exar_XR17V354, pbn_exar_XR17V358, + pbn_exar_XR17V4358, pbn_exar_XR17V8358, pbn_exar_ibm_saturn, pbn_pasemi_1682M, @@ -3695,6 +3720,14 @@ static struct pciserial_board pci_boards[] = { .reg_shift = 0, .first_offset = 0, }, + [pbn_exar_XR17V4358] = { + .flags = FL_BASE0, + .num_ports = 12, + .base_baud = 7812500, + .uart_offset = 0x400, + .reg_shift = 0, + .first_offset = 0, + }, [pbn_exar_XR17V8358] = { .flags = FL_BASE0, .num_ports = 16, @@ -5112,6 +5145,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_exar_XR17V358 }, + { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V4358, + PCI_ANY_ID, PCI_ANY_ID, + 0, + 0, pbn_exar_XR17V4358 }, { PCI_VENDOR_ID_EXAR, PCI_DEVICE_ID_EXAR_XR17V8358, PCI_ANY_ID, PCI_ANY_ID, 0, diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c new file mode 100644 index 000000000000..7d79425c2b09 --- /dev/null +++ b/drivers/tty/serial/8250/8250_uniphier.c @@ -0,0 +1,257 @@ +/* + * Copyright (C) 2015 Masahiro Yamada <yamada.masahiro@socionext.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> + +#include "8250.h" + +/* Most (but not all) of UniPhier UART devices have 64-depth FIFO. */ +#define UNIPHIER_UART_DEFAULT_FIFO_SIZE 64 + +#define UNIPHIER_UART_CHAR_FCR 3 /* Character / FIFO Control Register */ +#define UNIPHIER_UART_LCR_MCR 4 /* Line/Modem Control Register */ +#define UNIPHIER_UART_LCR_SHIFT 8 +#define UNIPHIER_UART_DLR 9 /* Divisor Latch Register */ + +struct uniphier8250_priv { + int line; + struct clk *clk; + spinlock_t atomic_write_lock; +}; + +/* + * The register map is slightly different from that of 8250. + * IO callbacks must be overridden for correct access to FCR, LCR, and MCR. + */ +static unsigned int uniphier_serial_in(struct uart_port *p, int offset) +{ + unsigned int valshift = 0; + + switch (offset) { + case UART_LCR: + valshift = UNIPHIER_UART_LCR_SHIFT; + /* fall through */ + case UART_MCR: + offset = UNIPHIER_UART_LCR_MCR; + break; + default: + break; + } + + offset <<= p->regshift; + + /* + * The return value must be masked with 0xff because LCR and MCR reside + * in the same register that must be accessed by 32-bit write/read. + * 8 or 16 bit access to this hardware result in unexpected behavior. + */ + return (readl(p->membase + offset) >> valshift) & 0xff; +} + +static void uniphier_serial_out(struct uart_port *p, int offset, int value) +{ + unsigned int valshift = 0; + bool normal = false; + + switch (offset) { + case UART_FCR: + offset = UNIPHIER_UART_CHAR_FCR; + break; + case UART_LCR: + valshift = UNIPHIER_UART_LCR_SHIFT; + /* Divisor latch access bit does not exist. */ + value &= ~(UART_LCR_DLAB << valshift); + /* fall through */ + case UART_MCR: + offset = UNIPHIER_UART_LCR_MCR; + break; + default: + normal = true; + break; + } + + offset <<= p->regshift; + + if (normal) { + writel(value, p->membase + offset); + } else { + /* + * Special case: two registers share the same address that + * must be 32-bit accessed. As this is not longer atomic safe, + * take a lock just in case. + */ + struct uniphier8250_priv *priv = p->private_data; + unsigned long flags; + u32 tmp; + + spin_lock_irqsave(&priv->atomic_write_lock, flags); + tmp = readl(p->membase + offset); + tmp &= ~(0xff << valshift); + tmp |= value << valshift; + writel(tmp, p->membase + offset); + spin_unlock_irqrestore(&priv->atomic_write_lock, flags); + } +} + +/* + * This hardware does not have the divisor latch access bit. + * The divisor latch register exists at different address. + * Override dl_read/write callbacks. + */ +static int uniphier_serial_dl_read(struct uart_8250_port *up) +{ + return readl(up->port.membase + UNIPHIER_UART_DLR); +} + +static void uniphier_serial_dl_write(struct uart_8250_port *up, int value) +{ + writel(value, up->port.membase + UNIPHIER_UART_DLR); +} + +static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port, + struct uniphier8250_priv *priv) +{ + int ret; + u32 prop; + struct device_node *np = dev->of_node; + + ret = of_alias_get_id(np, "serial"); + if (ret < 0) { + dev_err(dev, "failed to get alias id\n"); + return ret; + } + port->line = priv->line = ret; + + /* Get clk rate through clk driver */ + priv->clk = devm_clk_get(dev, NULL); + if (IS_ERR(priv->clk)) { + dev_err(dev, "failed to get clock\n"); + return PTR_ERR(priv->clk); + } + + ret = clk_prepare_enable(priv->clk); + if (ret < 0) + return ret; + + port->uartclk = clk_get_rate(priv->clk); + + /* Check for fifo size */ + if (of_property_read_u32(np, "fifo-size", &prop) == 0) + port->fifosize = prop; + else + port->fifosize = UNIPHIER_UART_DEFAULT_FIFO_SIZE; + + return 0; +} + +static int uniphier_uart_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct uart_8250_port up; + struct uniphier8250_priv *priv; + struct resource *regs; + void __iomem *membase; + int irq; + int ret; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "failed to get memory resource"); + return -EINVAL; + } + + membase = devm_ioremap(dev, regs->start, resource_size(regs)); + if (!membase) + return -ENOMEM; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(dev, "failed to get IRQ number"); + return irq; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + memset(&up, 0, sizeof(up)); + + ret = uniphier_of_serial_setup(dev, &up.port, priv); + if (ret < 0) + return ret; + + spin_lock_init(&priv->atomic_write_lock); + + up.port.dev = dev; + up.port.private_data = priv; + up.port.mapbase = regs->start; + up.port.mapsize = resource_size(regs); + up.port.membase = membase; + up.port.irq = irq; + + up.port.type = PORT_16550A; + up.port.iotype = UPIO_MEM32; + up.port.regshift = 2; + up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE; + up.capabilities = UART_CAP_FIFO; + + up.port.serial_in = uniphier_serial_in; + up.port.serial_out = uniphier_serial_out; + up.dl_read = uniphier_serial_dl_read; + up.dl_write = uniphier_serial_dl_write; + + ret = serial8250_register_8250_port(&up); + if (ret < 0) { + dev_err(dev, "failed to register 8250 port\n"); + return ret; + } + + platform_set_drvdata(pdev, priv); + + return 0; +} + +static int uniphier_uart_remove(struct platform_device *pdev) +{ + struct uniphier8250_priv *priv = platform_get_drvdata(pdev); + + serial8250_unregister_port(priv->line); + clk_disable_unprepare(priv->clk); + + return 0; +} + +static const struct of_device_id uniphier_uart_match[] = { + { .compatible = "socionext,uniphier-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, uniphier_uart_match); + +static struct platform_driver uniphier_uart_platform_driver = { + .probe = uniphier_uart_probe, + .remove = uniphier_uart_remove, + .driver = { + .name = "uniphier-uart", + .of_match_table = uniphier_uart_match, + }, +}; +module_platform_driver(uniphier_uart_platform_driver); + +MODULE_AUTHOR("Masahiro Yamada <yamada.masahiro@socionext.com>"); +MODULE_DESCRIPTION("UniPhier UART driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index c35070356528..a74a8e4717d4 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -336,9 +336,24 @@ config SERIAL_8250_FINTEK LPC to 4 UART. This device has some RS485 functionality not available through the PNP driver. If unsure, say N. +config SERIAL_8250_LPC18XX + bool "NXP LPC18xx/43xx serial port support" + depends on SERIAL_8250 && OF && (ARCH_LPC18XX || COMPILE_TEST) + default ARCH_LPC18XX + help + If you have a LPC18xx/43xx based board and want to use the + serial port, say Y to this option. If unsure, say Y. + config SERIAL_8250_MT6577 bool "Mediatek serial port support" depends on SERIAL_8250 && ARCH_MEDIATEK help If you have a Mediatek based board and want to use the serial port, say Y to this option. If unsure, say N. + +config SERIAL_8250_UNIPHIER + tristate "Support for UniPhier on-chip UART" + depends on SERIAL_8250 && ARCH_UNIPHIER + help + If you have a UniPhier based board and want to use the on-chip + serial ports, say Y to this option. If unsure, say N. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 31e7cdc6865c..6fa22ffad63d 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -22,4 +22,6 @@ obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o +obj-$(CONFIG_SERIAL_8250_LPC18XX) += 8250_lpc18xx.o obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o +obj-$(CONFIG_SERIAL_8250_UNIPHIER) += 8250_uniphier.o diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index dea1eff6a92c..76e65b714471 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -241,7 +241,6 @@ config SERIAL_SAMSUNG tristate "Samsung SoC serial support" depends on PLAT_SAMSUNG || ARCH_EXYNOS select SERIAL_CORE - select SERIAL_EARLYCON help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not @@ -277,6 +276,7 @@ config SERIAL_SAMSUNG_CONSOLE bool "Support for console on Samsung SoC serial port" depends on SERIAL_SAMSUNG=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON help Allow selection of the S3C24XX on-board serial ports for use as an virtual console. @@ -1179,15 +1179,42 @@ config SERIAL_SCCNXP_CONSOLE help Support for console on SCCNXP serial ports. +config SERIAL_SC16IS7XX_CORE + tristate + config SERIAL_SC16IS7XX - tristate "SC16IS7xx serial support" - depends on I2C - select SERIAL_CORE - select REGMAP_I2C if I2C - help - This selects support for SC16IS7xx serial ports. - Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, - SC16IS760 and SC16IS762. + tristate "SC16IS7xx serial support" + select SERIAL_CORE + depends on I2C || SPI_MASTER + help + This selects support for SC16IS7xx serial ports. + Supported ICs are SC16IS740, SC16IS741, SC16IS750, SC16IS752, + SC16IS760 and SC16IS762. Select supported buses using options below. + +config SERIAL_SC16IS7XX_I2C + bool "SC16IS7xx for I2C interface" + depends on SERIAL_SC16IS7XX + depends on I2C + select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX + select REGMAP_I2C if I2C + default y + help + Enable SC16IS7xx driver on I2C bus, + If required say y, and say n to i2c if not required, + Enabled by default to support oldconfig. + You must select at least one bus for the driver to be built. + +config SERIAL_SC16IS7XX_SPI + bool "SC16IS7xx for spi interface" + depends on SERIAL_SC16IS7XX + depends on SPI_MASTER + select SERIAL_SC16IS7XX_CORE if SERIAL_SC16IS7XX + select REGMAP_SPI if SPI_MASTER + help + Enable SC16IS7xx driver on SPI bus, + If required say y, and say n to spi if not required, + This is additional support to exsisting driver. + You must select at least one bus for the driver to be built. config SERIAL_BFIN_SPORT tristate "Blackfin SPORT emulate UART" @@ -1349,7 +1376,7 @@ config SERIAL_ALTERA_UART_CONSOLE config SERIAL_IFX6X60 tristate "SPI protocol driver for Infineon 6x60 modem (EXPERIMENTAL)" - depends on GPIOLIB && SPI + depends on GPIOLIB && SPI && HAS_DMA help Support for the IFX6x60 modem devices on Intel MID platforms. @@ -1378,14 +1405,6 @@ config SERIAL_PCH_UART_CONSOLE (the system console is the device which receives all kernel messages and warnings and which allows logins in single user mode). -config SERIAL_MSM_SMD - bool "Enable tty device interface for some SMD ports" - default n - depends on MSM_SMD - help - Enables userspace clients to read and write to some streaming SMD - ports via tty device interface for MSM chipset. - config SERIAL_MXS_AUART depends on ARCH_MXS tristate "MXS AUART support" @@ -1589,6 +1608,23 @@ config SERIAL_SPRD_CONSOLE with "earlycon" on the kernel command line. The console is enabled when early_param is processed. +config SERIAL_STM32 + tristate "STMicroelectronics STM32 serial port support" + select SERIAL_CORE + depends on ARM || COMPILE_TEST + help + This driver is for the on-chip Serial Controller on + STMicroelectronics STM32 MCUs. + USART supports Rx & Tx functionality. + It support all industry standard baud rates. + + If unsure, say N. + +config SERIAL_STM32_CONSOLE + bool "Support for console on STM32" + depends on SERIAL_STM32=y + select SERIAL_CORE_CONSOLE + endmenu config SERIAL_MCTRL_GPIO diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index c3ac3d930b33..5ab41119b3dc 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -53,7 +53,7 @@ obj-$(CONFIG_SERIAL_SB1250_DUART) += sb1250-duart.o obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o obj-$(CONFIG_SERIAL_ETRAXFS) += etraxfs-uart.o obj-$(CONFIG_SERIAL_SCCNXP) += sccnxp.o -obj-$(CONFIG_SERIAL_SC16IS7XX) += sc16is7xx.o +obj-$(CONFIG_SERIAL_SC16IS7XX_CORE) += sc16is7xx.o obj-$(CONFIG_SERIAL_JSM) += jsm/ obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o @@ -79,7 +79,6 @@ obj-$(CONFIG_SERIAL_ALTERA_JTAGUART) += altera_jtaguart.o obj-$(CONFIG_SERIAL_VT8500) += vt8500_serial.o obj-$(CONFIG_SERIAL_IFX6X60) += ifx6x60.o obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o -obj-$(CONFIG_SERIAL_MSM_SMD) += msm_smd_tty.o obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o @@ -93,6 +92,7 @@ obj-$(CONFIG_SERIAL_FSL_LPUART) += fsl_lpuart.o obj-$(CONFIG_SERIAL_CONEXANT_DIGICOLOR) += digicolor-usart.o obj-$(CONFIG_SERIAL_MEN_Z135) += men_z135_uart.o obj-$(CONFIG_SERIAL_SPRD) += sprd_serial.o +obj-$(CONFIG_SERIAL_STM32) += stm32-usart.o # GPIOLIB helpers for modem control lines obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c index 0fefdd8931a2..32df2a0cb060 100644 --- a/drivers/tty/serial/altera_jtaguart.c +++ b/drivers/tty/serial/altera_jtaguart.c @@ -387,7 +387,7 @@ console_initcall(altera_jtaguart_console_init); #define ALTERA_JTAGUART_CONSOLE NULL -#endif /* CONFIG_ALTERA_JTAGUART_CONSOLE */ +#endif /* CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE */ static struct uart_driver altera_jtaguart_driver = { .owner = THIS_MODULE, diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index b2859fe07e14..fd87a6f574e3 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -493,7 +493,7 @@ console_initcall(altera_uart_console_init); #define ALTERA_UART_CONSOLE NULL -#endif /* CONFIG_ALTERA_UART_CONSOLE */ +#endif /* CONFIG_SERIAL_ALTERA_UART_CONSOLE */ /* * Define the altera_uart UART driver structure. diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 763eb20fe321..50cf5b10ceed 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -58,7 +58,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/sizes.h> #include <linux/io.h> -#include <linux/workqueue.h> +#include <linux/acpi.h> #define UART_NR 14 @@ -79,6 +79,8 @@ struct vendor_data { bool oversampling; bool dma_threshold; bool cts_event_workaround; + bool always_enabled; + bool fixed_options; unsigned int (*get_fifosize)(struct amba_device *dev); }; @@ -95,9 +97,19 @@ static struct vendor_data vendor_arm = { .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, + .always_enabled = false, + .fixed_options = false, .get_fifosize = get_fifosize_arm, }; +static struct vendor_data vendor_sbsa = { + .oversampling = false, + .dma_threshold = false, + .cts_event_workaround = false, + .always_enabled = true, + .fixed_options = true, +}; + static unsigned int get_fifosize_st(struct amba_device *dev) { return 64; @@ -110,6 +122,8 @@ static struct vendor_data vendor_st = { .oversampling = true, .dma_threshold = true, .cts_event_workaround = true, + .always_enabled = false, + .fixed_options = false, .get_fifosize = get_fifosize_st, }; @@ -157,9 +171,8 @@ struct uart_amba_port { unsigned int lcrh_tx; /* vendor-specific */ unsigned int lcrh_rx; /* vendor-specific */ unsigned int old_cr; /* state during shutdown */ - struct delayed_work tx_softirq_work; bool autorts; - unsigned int tx_irq_seen; /* 0=none, 1=1, 2=2 or more */ + unsigned int fixed_baud; /* vendor-set fixed baud rate */ char type[12]; #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ @@ -1172,15 +1185,14 @@ static void pl011_stop_tx(struct uart_port *port) pl011_dma_tx_stop(uap); } -static bool pl011_tx_chars(struct uart_amba_port *uap); +static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); /* Start TX with programmed I/O only (no DMA) */ static void pl011_start_tx_pio(struct uart_amba_port *uap) { uap->im |= UART011_TXIM; writew(uap->im, uap->port.membase + UART011_IMSC); - if (!uap->tx_irq_seen) - pl011_tx_chars(uap); + pl011_tx_chars(uap, false); } static void pl011_start_tx(struct uart_port *port) @@ -1247,15 +1259,11 @@ __acquires(&uap->port.lock) spin_lock(&uap->port.lock); } -/* - * Transmit a character - * - * Returns true if the character was successfully queued to the FIFO. - * Returns false otherwise. - */ -static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c) +static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, + bool from_irq) { - if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + if (unlikely(!from_irq) && + readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) return false; /* unable to transmit character */ writew(c, uap->port.membase + UART01x_DR); @@ -1264,70 +1272,41 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c) return true; } -static bool pl011_tx_chars(struct uart_amba_port *uap) +static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq) { struct circ_buf *xmit = &uap->port.state->xmit; - int count; - - if (unlikely(uap->tx_irq_seen < 2)) - /* - * Initial FIFO fill level unknown: we must check TXFF - * after each write, so just try to fill up the FIFO. - */ - count = uap->fifosize; - else /* tx_irq_seen >= 2 */ - /* - * FIFO initially at least half-empty, so we can simply - * write half the FIFO without polling TXFF. - - * Note: the *first* TX IRQ can still race with - * pl011_start_tx_pio(), which can result in the FIFO - * being fuller than expected in that case. - */ - count = uap->fifosize >> 1; - - /* - * If the FIFO is full we're guaranteed a TX IRQ at some later point, - * and can't transmit immediately in any case: - */ - if (unlikely(uap->tx_irq_seen < 2 && - readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF)) - return false; + int count = uap->fifosize >> 1; if (uap->port.x_char) { - if (!pl011_tx_char(uap, uap->port.x_char)) - goto done; + if (!pl011_tx_char(uap, uap->port.x_char, from_irq)) + return; uap->port.x_char = 0; --count; } if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) { pl011_stop_tx(&uap->port); - goto done; + return; } /* If we are using DMA mode, try to send some characters. */ if (pl011_dma_tx_irq(uap)) - goto done; + return; - while (count-- > 0 && pl011_tx_char(uap, xmit->buf[xmit->tail])) { - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - if (uart_circ_empty(xmit)) + do { + if (likely(from_irq) && count-- == 0) break; - } + + if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq)) + break; + + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + } while (!uart_circ_empty(xmit)); if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uap->port); - if (uart_circ_empty(xmit)) { + if (uart_circ_empty(xmit)) pl011_stop_tx(&uap->port); - goto done; - } - - if (unlikely(!uap->tx_irq_seen)) - schedule_delayed_work(&uap->tx_softirq_work, uap->port.timeout); - -done: - return false; } static void pl011_modem_status(struct uart_amba_port *uap) @@ -1354,26 +1333,23 @@ static void pl011_modem_status(struct uart_amba_port *uap) wake_up_interruptible(&uap->port.state->port.delta_msr_wait); } -static void pl011_tx_softirq(struct work_struct *work) +static void check_apply_cts_event_workaround(struct uart_amba_port *uap) { - struct delayed_work *dwork = to_delayed_work(work); - struct uart_amba_port *uap = - container_of(dwork, struct uart_amba_port, tx_softirq_work); - - spin_lock(&uap->port.lock); - while (pl011_tx_chars(uap)) ; - spin_unlock(&uap->port.lock); -} + unsigned int dummy_read; -static void pl011_tx_irq_seen(struct uart_amba_port *uap) -{ - if (likely(uap->tx_irq_seen > 1)) + if (!uap->vendor->cts_event_workaround) return; - uap->tx_irq_seen++; - if (uap->tx_irq_seen < 2) - /* first TX IRQ */ - cancel_delayed_work(&uap->tx_softirq_work); + /* workaround to make sure that all bits are unlocked.. */ + writew(0x00, uap->port.membase + UART011_ICR); + + /* + * WA: introduce 26ns(1 uart clk) delay before W1C; + * single apb access will incur 2 pclk(133.12Mhz) delay, + * so add 2 dummy reads + */ + dummy_read = readw(uap->port.membase + UART011_ICR); + dummy_read = readw(uap->port.membase + UART011_ICR); } static irqreturn_t pl011_int(int irq, void *dev_id) @@ -1381,25 +1357,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id) struct uart_amba_port *uap = dev_id; unsigned long flags; unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT; + u16 imsc; int handled = 0; - unsigned int dummy_read; spin_lock_irqsave(&uap->port.lock, flags); - status = readw(uap->port.membase + UART011_MIS); + imsc = readw(uap->port.membase + UART011_IMSC); + status = readw(uap->port.membase + UART011_RIS) & imsc; if (status) { do { - if (uap->vendor->cts_event_workaround) { - /* workaround to make sure that all bits are unlocked.. */ - writew(0x00, uap->port.membase + UART011_ICR); - - /* - * WA: introduce 26ns(1 uart clk) delay before W1C; - * single apb access will incur 2 pclk(133.12Mhz) delay, - * so add 2 dummy reads - */ - dummy_read = readw(uap->port.membase + UART011_ICR); - dummy_read = readw(uap->port.membase + UART011_ICR); - } + check_apply_cts_event_workaround(uap); writew(status & ~(UART011_TXIS|UART011_RTIS| UART011_RXIS), @@ -1414,15 +1380,13 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (status & (UART011_DSRMIS|UART011_DCDMIS| UART011_CTSMIS|UART011_RIMIS)) pl011_modem_status(uap); - if (status & UART011_TXIS) { - pl011_tx_irq_seen(uap); - pl011_tx_chars(uap); - } + if (status & UART011_TXIS) + pl011_tx_chars(uap, true); if (pass_counter-- == 0) break; - status = readw(uap->port.membase + UART011_MIS); + status = readw(uap->port.membase + UART011_RIS) & imsc; } while (status != 0); handled = 1; } @@ -1617,6 +1581,32 @@ static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) } } +static int pl011_allocate_irq(struct uart_amba_port *uap) +{ + writew(uap->im, uap->port.membase + UART011_IMSC); + + return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); +} + +/* + * Enable interrupts, only timeouts when using DMA + * if initial RX DMA job failed, start in interrupt mode + * as well. + */ +static void pl011_enable_interrupts(struct uart_amba_port *uap) +{ + spin_lock_irq(&uap->port.lock); + + /* Clear out any spuriously appearing RX interrupts */ + writew(UART011_RTIS | UART011_RXIS, + uap->port.membase + UART011_ICR); + uap->im = UART011_RTIM; + if (!pl011_dma_rx_running(uap)) + uap->im |= UART011_RXIM; + writew(uap->im, uap->port.membase + UART011_IMSC); + spin_unlock_irq(&uap->port.lock); +} + static int pl011_startup(struct uart_port *port) { struct uart_amba_port *uap = @@ -1628,20 +1618,12 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - writew(uap->im, uap->port.membase + UART011_IMSC); - - /* - * Allocate the IRQ - */ - retval = request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); + retval = pl011_allocate_irq(uap); if (retval) goto clk_dis; writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); - /* Assume that TX IRQ doesn't work until we see one: */ - uap->tx_irq_seen = 0; - spin_lock_irq(&uap->port.lock); /* restore RTS and DTR */ @@ -1659,20 +1641,7 @@ static int pl011_startup(struct uart_port *port) /* Startup DMA */ pl011_dma_startup(uap); - /* - * Finally, enable interrupts, only timeouts when using DMA - * if initial RX DMA job failed, start in interrupt mode - * as well. - */ - spin_lock_irq(&uap->port.lock); - /* Clear out any spuriously appearing RX interrupts */ - writew(UART011_RTIS | UART011_RXIS, - uap->port.membase + UART011_ICR); - uap->im = UART011_RTIM; - if (!pl011_dma_rx_running(uap)) - uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); - spin_unlock_irq(&uap->port.lock); + pl011_enable_interrupts(uap); return 0; @@ -1681,6 +1650,28 @@ static int pl011_startup(struct uart_port *port) return retval; } +static int sbsa_uart_startup(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + int retval; + + retval = pl011_hwinit(port); + if (retval) + return retval; + + retval = pl011_allocate_irq(uap); + if (retval) + return retval; + + /* The SBSA UART does not support any modem status lines. */ + uap->old_status = 0; + + pl011_enable_interrupts(uap); + + return 0; +} + static void pl011_shutdown_channel(struct uart_amba_port *uap, unsigned int lcrh) { @@ -1691,36 +1682,15 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap, writew(val, uap->port.membase + lcrh); } -static void pl011_shutdown(struct uart_port *port) +/* + * disable the port. It should not disable RTS and DTR. + * Also RTS and DTR state should be preserved to restore + * it during startup(). + */ +static void pl011_disable_uart(struct uart_amba_port *uap) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); unsigned int cr; - cancel_delayed_work_sync(&uap->tx_softirq_work); - - /* - * disable all interrupts - */ - spin_lock_irq(&uap->port.lock); - uap->im = 0; - writew(uap->im, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); - spin_unlock_irq(&uap->port.lock); - - pl011_dma_shutdown(uap); - - /* - * Free the interrupt - */ - free_irq(uap->port.irq, uap); - - /* - * disable the port - * disable the port. It should not disable RTS and DTR. - * Also RTS and DTR state should be preserved to restore - * it during startup(). - */ uap->autorts = false; spin_lock_irq(&uap->port.lock); cr = readw(uap->port.membase + UART011_CR); @@ -1736,6 +1706,32 @@ static void pl011_shutdown(struct uart_port *port) pl011_shutdown_channel(uap, uap->lcrh_rx); if (uap->lcrh_rx != uap->lcrh_tx) pl011_shutdown_channel(uap, uap->lcrh_tx); +} + +static void pl011_disable_interrupts(struct uart_amba_port *uap) +{ + spin_lock_irq(&uap->port.lock); + + /* mask all interrupts and clear all pending ones */ + uap->im = 0; + writew(uap->im, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + + spin_unlock_irq(&uap->port.lock); +} + +static void pl011_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + pl011_disable_interrupts(uap); + + pl011_dma_shutdown(uap); + + free_irq(uap->port.irq, uap); + + pl011_disable_uart(uap); /* * Shut down the clock producer @@ -1756,6 +1752,51 @@ static void pl011_shutdown(struct uart_port *port) uap->port.ops->flush_buffer(port); } +static void sbsa_uart_shutdown(struct uart_port *port) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + pl011_disable_interrupts(uap); + + free_irq(uap->port.irq, uap); + + if (uap->port.ops->flush_buffer) + uap->port.ops->flush_buffer(port); +} + +static void +pl011_setup_status_masks(struct uart_port *port, struct ktermios *termios) +{ + port->read_status_mask = UART011_DR_OE | 255; + if (termios->c_iflag & INPCK) + port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= UART011_DR_BE; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= UART011_DR_BE; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= UART011_DR_OE; + } + + /* + * Ignore all characters if CREAD is not set. + */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= UART_DUMMY_DR_RX; +} + static void pl011_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -1820,33 +1861,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, */ uart_update_timeout(port, termios->c_cflag, baud); - port->read_status_mask = UART011_DR_OE | 255; - if (termios->c_iflag & INPCK) - port->read_status_mask |= UART011_DR_FE | UART011_DR_PE; - if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) - port->read_status_mask |= UART011_DR_BE; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART011_DR_FE | UART011_DR_PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= UART011_DR_BE; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= UART011_DR_OE; - } - - /* - * Ignore all characters if CREAD is not set. - */ - if ((termios->c_cflag & CREAD) == 0) - port->ignore_status_mask |= UART_DUMMY_DR_RX; + pl011_setup_status_masks(port, termios); if (UART_ENABLE_MS(port, termios->c_cflag)) pl011_enable_ms(port); @@ -1901,6 +1916,27 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, spin_unlock_irqrestore(&port->lock, flags); } +static void +sbsa_uart_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + unsigned long flags; + + tty_termios_encode_baud_rate(termios, uap->fixed_baud, uap->fixed_baud); + + /* The SBSA UART only supports 8n1 without hardware flow control. */ + termios->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD); + termios->c_cflag &= ~(CMSPAR | CRTSCTS); + termios->c_cflag |= CS8 | CLOCAL; + + spin_lock_irqsave(&port->lock, flags); + uart_update_timeout(port, CS8, uap->fixed_baud); + pl011_setup_status_masks(port, termios); + spin_unlock_irqrestore(&port->lock, flags); +} + static const char *pl011_type(struct uart_port *port) { struct uart_amba_port *uap = @@ -1976,6 +2012,37 @@ static struct uart_ops amba_pl011_pops = { #endif }; +static void sbsa_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} + +static unsigned int sbsa_uart_get_mctrl(struct uart_port *port) +{ + return 0; +} + +static const struct uart_ops sbsa_uart_pops = { + .tx_empty = pl011_tx_empty, + .set_mctrl = sbsa_uart_set_mctrl, + .get_mctrl = sbsa_uart_get_mctrl, + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, + .startup = sbsa_uart_startup, + .shutdown = sbsa_uart_shutdown, + .set_termios = sbsa_uart_set_termios, + .type = pl011_type, + .release_port = pl011_release_port, + .request_port = pl011_request_port, + .config_port = pl011_config_port, + .verify_port = pl011_verify_port, +#ifdef CONFIG_CONSOLE_POLL + .poll_init = pl011_hwinit, + .poll_get_char = pl011_get_poll_char, + .poll_put_char = pl011_put_poll_char, +#endif +}; + static struct uart_amba_port *amba_ports[UART_NR]; #ifdef CONFIG_SERIAL_AMBA_PL011_CONSOLE @@ -1994,7 +2061,7 @@ static void pl011_console_write(struct console *co, const char *s, unsigned int count) { struct uart_amba_port *uap = amba_ports[co->index]; - unsigned int status, old_cr, new_cr; + unsigned int status, old_cr = 0, new_cr; unsigned long flags; int locked = 1; @@ -2011,10 +2078,12 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) /* * First save the CR then disable the interrupts */ - old_cr = readw(uap->port.membase + UART011_CR); - new_cr = old_cr & ~UART011_CR_CTSEN; - new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(new_cr, uap->port.membase + UART011_CR); + if (!uap->vendor->always_enabled) { + old_cr = readw(uap->port.membase + UART011_CR); + new_cr = old_cr & ~UART011_CR_CTSEN; + new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + writew(new_cr, uap->port.membase + UART011_CR); + } uart_console_write(&uap->port, s, count, pl011_console_putchar); @@ -2025,7 +2094,8 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) do { status = readw(uap->port.membase + UART01x_FR); } while (status & UART01x_FR_BUSY); - writew(old_cr, uap->port.membase + UART011_CR); + if (!uap->vendor->always_enabled) + writew(old_cr, uap->port.membase + UART011_CR); if (locked) spin_unlock(&uap->port.lock); @@ -2106,10 +2176,15 @@ static int __init pl011_console_setup(struct console *co, char *options) uap->port.uartclk = clk_get_rate(uap->clk); - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - pl011_console_get_options(uap, &baud, &parity, &bits); + if (uap->vendor->fixed_options) { + baud = uap->fixed_baud; + } else { + if (options) + uart_parse_options(options, + &baud, &parity, &bits, &flow); + else + pl011_console_get_options(uap, &baud, &parity, &bits); + } return uart_set_options(&uap->port, co, baud, parity, bits, flow); } @@ -2201,97 +2276,126 @@ static int pl011_probe_dt_alias(int index, struct device *dev) return ret; } -static int pl011_probe(struct amba_device *dev, const struct amba_id *id) +/* unregisters the driver also if no more ports are left */ +static void pl011_unregister_port(struct uart_amba_port *uap) { - struct uart_amba_port *uap; - struct vendor_data *vendor = id->data; - void __iomem *base; - int i, ret; + int i; + bool busy = false; + + for (i = 0; i < ARRAY_SIZE(amba_ports); i++) { + if (amba_ports[i] == uap) + amba_ports[i] = NULL; + else if (amba_ports[i]) + busy = true; + } + pl011_dma_remove(uap); + if (!busy) + uart_unregister_driver(&amba_reg); +} + +static int pl011_find_free_port(void) +{ + int i; for (i = 0; i < ARRAY_SIZE(amba_ports); i++) if (amba_ports[i] == NULL) - break; - - if (i == ARRAY_SIZE(amba_ports)) - return -EBUSY; + return i; - uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port), - GFP_KERNEL); - if (uap == NULL) - return -ENOMEM; + return -EBUSY; +} - i = pl011_probe_dt_alias(i, &dev->dev); +static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, + struct resource *mmiobase, int index) +{ + void __iomem *base; - base = devm_ioremap(&dev->dev, dev->res.start, - resource_size(&dev->res)); + base = devm_ioremap_resource(dev, mmiobase); if (!base) return -ENOMEM; - uap->clk = devm_clk_get(&dev->dev, NULL); - if (IS_ERR(uap->clk)) - return PTR_ERR(uap->clk); + index = pl011_probe_dt_alias(index, dev); - uap->vendor = vendor; - uap->lcrh_rx = vendor->lcrh_rx; - uap->lcrh_tx = vendor->lcrh_tx; uap->old_cr = 0; - uap->fifosize = vendor->get_fifosize(dev); - uap->port.dev = &dev->dev; - uap->port.mapbase = dev->res.start; + uap->port.dev = dev; + uap->port.mapbase = mmiobase->start; uap->port.membase = base; uap->port.iotype = UPIO_MEM; - uap->port.irq = dev->irq[0]; uap->port.fifosize = uap->fifosize; - uap->port.ops = &amba_pl011_pops; uap->port.flags = UPF_BOOT_AUTOCONF; - uap->port.line = i; - INIT_DELAYED_WORK(&uap->tx_softirq_work, pl011_tx_softirq); + uap->port.line = index; - /* Ensure interrupts from this UART are masked and cleared */ - writew(0, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); + amba_ports[index] = uap; - snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); + return 0; +} - amba_ports[i] = uap; +static int pl011_register_port(struct uart_amba_port *uap) +{ + int ret; - amba_set_drvdata(dev, uap); + /* Ensure interrupts from this UART are masked and cleared */ + writew(0, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); if (!amba_reg.state) { ret = uart_register_driver(&amba_reg); if (ret < 0) { - dev_err(&dev->dev, + dev_err(uap->port.dev, "Failed to register AMBA-PL011 driver\n"); return ret; } } ret = uart_add_one_port(&amba_reg, &uap->port); - if (ret) { - amba_ports[i] = NULL; - uart_unregister_driver(&amba_reg); - } + if (ret) + pl011_unregister_port(uap); return ret; } +static int pl011_probe(struct amba_device *dev, const struct amba_id *id) +{ + struct uart_amba_port *uap; + struct vendor_data *vendor = id->data; + int portnr, ret; + + portnr = pl011_find_free_port(); + if (portnr < 0) + return portnr; + + uap = devm_kzalloc(&dev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); + if (!uap) + return -ENOMEM; + + uap->clk = devm_clk_get(&dev->dev, NULL); + if (IS_ERR(uap->clk)) + return PTR_ERR(uap->clk); + + uap->vendor = vendor; + uap->lcrh_rx = vendor->lcrh_rx; + uap->lcrh_tx = vendor->lcrh_tx; + uap->fifosize = vendor->get_fifosize(dev); + uap->port.irq = dev->irq[0]; + uap->port.ops = &amba_pl011_pops; + + snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); + + ret = pl011_setup_port(&dev->dev, uap, &dev->res, portnr); + if (ret) + return ret; + + amba_set_drvdata(dev, uap); + + return pl011_register_port(uap); +} + static int pl011_remove(struct amba_device *dev) { struct uart_amba_port *uap = amba_get_drvdata(dev); - bool busy = false; - int i; uart_remove_one_port(&amba_reg, &uap->port); - - for (i = 0; i < ARRAY_SIZE(amba_ports); i++) - if (amba_ports[i] == uap) - amba_ports[i] = NULL; - else if (amba_ports[i]) - busy = true; - - pl011_dma_remove(uap); - if (!busy) - uart_unregister_driver(&amba_reg); + pl011_unregister_port(uap); return 0; } @@ -2319,6 +2423,86 @@ static int pl011_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pl011_dev_pm_ops, pl011_suspend, pl011_resume); +static int sbsa_uart_probe(struct platform_device *pdev) +{ + struct uart_amba_port *uap; + struct resource *r; + int portnr, ret; + int baudrate; + + /* + * Check the mandatory baud rate parameter in the DT node early + * so that we can easily exit with the error. + */ + if (pdev->dev.of_node) { + struct device_node *np = pdev->dev.of_node; + + ret = of_property_read_u32(np, "current-speed", &baudrate); + if (ret) + return ret; + } else { + baudrate = 115200; + } + + portnr = pl011_find_free_port(); + if (portnr < 0) + return portnr; + + uap = devm_kzalloc(&pdev->dev, sizeof(struct uart_amba_port), + GFP_KERNEL); + if (!uap) + return -ENOMEM; + + uap->vendor = &vendor_sbsa; + uap->fifosize = 32; + uap->port.irq = platform_get_irq(pdev, 0); + uap->port.ops = &sbsa_uart_pops; + uap->fixed_baud = baudrate; + + snprintf(uap->type, sizeof(uap->type), "SBSA"); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + ret = pl011_setup_port(&pdev->dev, uap, r, portnr); + if (ret) + return ret; + + platform_set_drvdata(pdev, uap); + + return pl011_register_port(uap); +} + +static int sbsa_uart_remove(struct platform_device *pdev) +{ + struct uart_amba_port *uap = platform_get_drvdata(pdev); + + uart_remove_one_port(&amba_reg, &uap->port); + pl011_unregister_port(uap); + return 0; +} + +static const struct of_device_id sbsa_uart_of_match[] = { + { .compatible = "arm,sbsa-uart", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sbsa_uart_of_match); + +static const struct acpi_device_id sbsa_uart_acpi_match[] = { + { "ARMH0011", 0 }, + {}, +}; +MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match); + +static struct platform_driver arm_sbsa_uart_platform_driver = { + .probe = sbsa_uart_probe, + .remove = sbsa_uart_remove, + .driver = { + .name = "sbsa-uart", + .of_match_table = of_match_ptr(sbsa_uart_of_match), + .acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match), + }, +}; + static struct amba_id pl011_ids[] = { { .id = 0x00041011, @@ -2349,11 +2533,14 @@ static int __init pl011_init(void) { printk(KERN_INFO "Serial: AMBA PL011 UART driver\n"); + if (platform_driver_register(&arm_sbsa_uart_platform_driver)) + pr_warn("could not register SBSA UART platform driver\n"); return amba_driver_register(&pl011_driver); } static void __exit pl011_exit(void) { + platform_driver_unregister(&arm_sbsa_uart_platform_driver); amba_driver_unregister(&pl011_driver); } diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 27dade29646b..2a8f528153e7 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -165,6 +165,7 @@ struct atmel_uart_port { struct tasklet_struct tasklet; unsigned int irq_status; unsigned int irq_status_prev; + unsigned int status_change; struct circ_buf rx_ring; @@ -315,8 +316,7 @@ static int atmel_config_rs485(struct uart_port *port, if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if ((rs485conf->delay_rts_after_send) > 0) - UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); + UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); @@ -354,8 +354,7 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl) /* override mode to RS485 if needed, otherwise keep the current mode */ if (port->rs485.flags & SER_RS485_ENABLED) { - if ((port->rs485.delay_rts_after_send) > 0) - UART_PUT_TTGR(port, port->rs485.delay_rts_after_send); + UART_PUT_TTGR(port, port->rs485.delay_rts_after_send); mode &= ~ATMEL_US_USMODE; mode |= ATMEL_US_USMODE_RS485; } @@ -1177,6 +1176,9 @@ atmel_handle_status(struct uart_port *port, unsigned int pending, if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC | ATMEL_US_CTSIC)) { atmel_port->irq_status = status; + atmel_port->status_change = atmel_port->irq_status ^ + atmel_port->irq_status_prev; + atmel_port->irq_status_prev = status; tasklet_schedule(&atmel_port->tasklet); } } @@ -1523,17 +1525,14 @@ static void atmel_tasklet_func(unsigned long data) { struct uart_port *port = (struct uart_port *)data; struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); - unsigned int status; - unsigned int status_change; + unsigned int status = atmel_port->irq_status; + unsigned int status_change = atmel_port->status_change; /* The interrupt handler does not take the lock */ spin_lock(&port->lock); atmel_port->schedule_tx(port); - status = atmel_port->irq_status; - status_change = status ^ atmel_port->irq_status_prev; - if (status_change & (ATMEL_US_RI | ATMEL_US_DSR | ATMEL_US_DCD | ATMEL_US_CTS)) { /* TODO: All reads to CSR will clear these interrupts! */ @@ -1548,7 +1547,7 @@ static void atmel_tasklet_func(unsigned long data) wake_up_interruptible(&port->state->port.delta_msr_wait); - atmel_port->irq_status_prev = status; + atmel_port->status_change = 0; } atmel_port->schedule_rx(port); @@ -2061,8 +2060,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, /* mode */ if (port->rs485.flags & SER_RS485_ENABLED) { - if ((port->rs485.delay_rts_after_send) > 0) - UART_PUT_TTGR(port, port->rs485.delay_rts_after_send); + UART_PUT_TTGR(port, port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else if (termios->c_cflag & CRTSCTS) { /* RS232 with hardware handshake (RTS/CTS) */ diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c index 155781ece050..ae3cf94b146b 100644 --- a/drivers/tty/serial/bfin_uart.c +++ b/drivers/tty/serial/bfin_uart.c @@ -74,8 +74,8 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart); static void bfin_serial_reset_irda(struct uart_port *port); -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +#if defined(SERIAL_BFIN_CTSRTS) || \ + defined(SERIAL_BFIN_HARD_CTSRTS) static unsigned int bfin_serial_get_mctrl(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; @@ -110,7 +110,7 @@ static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) struct bfin_serial_port *uart = dev_id; struct uart_port *uport = &uart->port; unsigned int status = bfin_serial_get_mctrl(uport); -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS +#ifdef SERIAL_BFIN_HARD_CTSRTS UART_CLEAR_SCTS(uart); if (uport->hw_stopped) { @@ -700,7 +700,7 @@ static int bfin_serial_startup(struct uart_port *port) # endif #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef SERIAL_BFIN_CTSRTS if (uart->cts_pin >= 0) { if (request_irq(gpio_to_irq(uart->cts_pin), bfin_serial_mctrl_cts_int, @@ -718,7 +718,7 @@ static int bfin_serial_startup(struct uart_port *port) gpio_direction_output(uart->rts_pin, 0); } #endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS +#ifdef SERIAL_BFIN_HARD_CTSRTS if (uart->cts_pin >= 0) { if (request_irq(uart->status_irq, bfin_serial_mctrl_cts_int, 0, "BFIN_UART_MODEM_STATUS", uart)) { @@ -766,13 +766,13 @@ static void bfin_serial_shutdown(struct uart_port *port) free_irq(uart->tx_irq, uart); #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef SERIAL_BFIN_CTSRTS if (uart->cts_pin >= 0) free_irq(gpio_to_irq(uart->cts_pin), uart); if (uart->rts_pin >= 0) gpio_free(uart->rts_pin); #endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS +#ifdef SERIAL_BFIN_HARD_CTSRTS if (uart->cts_pin >= 0) free_irq(uart->status_irq, uart); #endif @@ -788,7 +788,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, unsigned int ier, lcr = 0; unsigned long timeout; -#ifdef CONFIG_SERIAL_BFIN_CTSRTS +#ifdef SERIAL_BFIN_CTSRTS if (old == NULL && uart->cts_pin != -1) termios->c_cflag |= CRTSCTS; else if (uart->cts_pin == -1) @@ -1110,8 +1110,8 @@ bfin_serial_console_setup(struct console *co, char *options) int baud = 57600; int bits = 8; int parity = 'n'; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +# if defined(SERIAL_BFIN_CTSRTS) || \ + defined(SERIAL_BFIN_HARD_CTSRTS) int flow = 'r'; # else int flow = 'n'; @@ -1322,8 +1322,8 @@ static int bfin_serial_probe(struct platform_device *pdev) init_timer(&(uart->rx_dma_timer)); #endif -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +#if defined(SERIAL_BFIN_CTSRTS) || \ + defined(SERIAL_BFIN_HARD_CTSRTS) res = platform_get_resource(pdev, IORESOURCE_IO, 0); if (res == NULL) uart->cts_pin = -1; diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 0c1825b0b41d..3e4470af5c50 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -56,10 +56,6 @@ static char *serial_version = "$Revision: 1.25 $"; #error "RX_TIMEOUT_TICKS == 0 not allowed, use 1" #endif -#if defined(CONFIG_ETRAX_RS485_ON_PA) && defined(CONFIG_ETRAX_RS485_ON_PORT_G) -#error "Disable either CONFIG_ETRAX_RS485_ON_PA or CONFIG_ETRAX_RS485_ON_PORT_G" -#endif - /* * All of the compatibilty code so we can compile serial.c against * older kernels is hidden in serial_compat.h @@ -455,30 +451,6 @@ static struct e100_serial rs_table[] = { static struct fast_timer fast_timers[NR_PORTS]; #endif -#ifdef CONFIG_ETRAX_SERIAL_PROC_ENTRY -#define PROCSTAT(x) x -struct ser_statistics_type { - int overrun_cnt; - int early_errors_cnt; - int ser_ints_ok_cnt; - int errors_cnt; - unsigned long int processing_flip; - unsigned long processing_flip_still_room; - unsigned long int timeout_flush_cnt; - int rx_dma_ints; - int tx_dma_ints; - int rx_tot; - int tx_tot; -}; - -static struct ser_statistics_type ser_stat[NR_PORTS]; - -#else - -#define PROCSTAT(x) - -#endif /* CONFIG_ETRAX_SERIAL_PROC_ENTRY */ - /* RS-485 */ #if defined(CONFIG_ETRAX_RS485) #ifdef CONFIG_ETRAX_FAST_TIMER @@ -487,9 +459,6 @@ static struct fast_timer fast_timers_rs485[NR_PORTS]; #if defined(CONFIG_ETRAX_RS485_ON_PA) static int rs485_pa_bit = CONFIG_ETRAX_RS485_ON_PA_BIT; #endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) -static int rs485_port_g_bit = CONFIG_ETRAX_RS485_ON_PORT_G_BIT; -#endif #endif /* Info and macros needed for each ports extra control/status signals. */ @@ -739,10 +708,10 @@ static unsigned char dummy_ser[NR_PORTS] = {0xFF, 0xFF, 0xFF,0xFF}; defined(CONFIG_ETRAX_SER1_DTR_RI_DSR_CD_MIXED) || \ defined(CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED) || \ defined(CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_MIXED) -#define CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED +#define ETRAX_SERX_DTR_RI_DSR_CD_MIXED #endif -#ifdef CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED +#ifdef ETRAX_SERX_DTR_RI_DSR_CD_MIXED /* The pins can be mixed on PA and PB */ #define CONTROL_PINS_PORT_NOT_USED(line) \ &dummy_ser[line], &dummy_ser[line], \ @@ -835,7 +804,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] = #endif } }; -#else /* CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ +#else /* ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ /* All pins are on either PA or PB for each serial port */ #define CONTROL_PINS_PORT_NOT_USED(line) \ @@ -917,7 +886,7 @@ static const struct control_pins e100_modem_pins[NR_PORTS] = #endif } }; -#endif /* !CONFIG_ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ +#endif /* !ETRAX_SERX_DTR_RI_DSR_CD_MIXED */ #define E100_RTS_MASK 0x20 #define E100_CTS_MASK 0x40 @@ -1367,16 +1336,6 @@ e100_enable_rs485(struct tty_struct *tty, struct serial_rs485 *r) #if defined(CONFIG_ETRAX_RS485_ON_PA) *R_PORT_PA_DATA = port_pa_data_shadow |= (1 << rs485_pa_bit); #endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - rs485_port_g_bit, 1); -#endif -#if defined(CONFIG_ETRAX_RS485_LTC1387) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 1); - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 1); -#endif info->rs485 = *r; @@ -1676,7 +1635,8 @@ alloc_recv_buffer(unsigned int size) { struct etrax_recv_buffer *buffer; - if (!(buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC))) + buffer = kmalloc(sizeof *buffer + size, GFP_ATOMIC); + if (!buffer) return NULL; buffer->next = NULL; @@ -1712,7 +1672,8 @@ add_char_and_flag(struct e100_serial *info, unsigned char data, unsigned char fl { struct etrax_recv_buffer *buffer; if (info->uses_dma_in) { - if (!(buffer = alloc_recv_buffer(4))) + buffer = alloc_recv_buffer(4); + if (!buffer) return 0; buffer->length = 1; @@ -1750,7 +1711,8 @@ static unsigned int handle_descr_data(struct e100_serial *info, append_recv_buffer(info, buffer); - if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); + if (!buffer) panic("%s: Failed to allocate memory for receive buffer!\n", __func__); descr->buf = virt_to_phys(buffer->buffer); @@ -1841,7 +1803,6 @@ static void receive_chars_dma(struct e100_serial *info) */ unsigned char data = info->ioport[REG_DATA]; - PROCSTAT(ser_stat[info->line].errors_cnt++); DEBUG_LOG(info->line, "#dERR: s d 0x%04X\n", ((rstat & SER_ERROR_MASK) << 8) | data); @@ -1867,7 +1828,8 @@ static int start_recv_dma(struct e100_serial *info) /* Set up the receiving descriptors */ for (i = 0; i < SERIAL_RECV_DESCRIPTORS; i++) { - if (!(buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE))) + buffer = alloc_recv_buffer(SERIAL_DESCR_BUF_SIZE); + if (!buffer) panic("%s: Failed to allocate memory for receive buffer!\n", __func__); descr[i].ctrl = d_int; @@ -1943,7 +1905,6 @@ tr_interrupt(int irq, void *dev_id) /* Read jiffies_usec first, * we want this time to be as late as possible */ - PROCSTAT(ser_stat[info->line].tx_dma_ints++); info->last_tx_active_usec = GET_JIFFIES_USEC(); info->last_tx_active = jiffies; transmit_chars_dma(info); @@ -2022,7 +1983,6 @@ static int force_eop_if_needed(struct e100_serial *info) */ if (!info->forced_eop) { info->forced_eop = 1; - PROCSTAT(ser_stat[info->line].timeout_flush_cnt++); TIMERD(DEBUG_LOG(info->line, "timeout EOP %i\n", info->line)); FORCE_EOP(info); } @@ -2374,7 +2334,6 @@ static void handle_ser_rx_interrupt(struct e100_serial *info) DEBUG_LOG(info->line, "#iERR s d %04X\n", ((rstat & SER_ERROR_MASK) << 8) | data); } - PROCSTAT(ser_stat[info->line].early_errors_cnt++); } else { /* It was a valid byte, now let the DMA do the rest */ unsigned long curr_time_u = GET_JIFFIES_USEC(); unsigned long curr_time = jiffies; @@ -2407,7 +2366,6 @@ static void handle_ser_rx_interrupt(struct e100_serial *info) DINTR2(DEBUG_LOG(info->line, "ser_rx OK %d\n", info->line)); info->break_detected_cnt = 0; - PROCSTAT(ser_stat[info->line].ser_ints_ok_cnt++); } /* Restarting the DMA never hurts */ *info->icmdadr = IO_STATE(R_DMA_CH6_CMD, cmd, restart); @@ -2867,19 +2825,6 @@ change_speed(struct e100_serial *info) *R_SERIAL_PRESCALE = divisor; info->baud = SERIAL_PRESCALE_BASE/divisor; } -#ifdef CONFIG_ETRAX_EXTERN_PB6CLK_ENABLED - else if ((info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8 && - info->custom_divisor == 1) || - (info->baud_base==CONFIG_ETRAX_EXTERN_PB6CLK_FREQ && - info->custom_divisor == 8)) { - /* ext_clk selected */ - alt_source = - IO_STATE(R_ALT_SER_BAUDRATE, ser0_rec, extern) | - IO_STATE(R_ALT_SER_BAUDRATE, ser0_tr, extern); - DBAUD(printk("using external baudrate: %lu\n", CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8)); - info->baud = CONFIG_ETRAX_EXTERN_PB6CLK_FREQ/8; - } -#endif else { /* Bad baudbase, we don't support using timer0 @@ -3216,9 +3161,7 @@ rs_throttle(struct tty_struct * tty) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %lu....\n", tty_name(tty, buf), + printk("throttle %s: %lu....\n", tty_name(tty), (unsigned long)tty->ldisc.chars_in_buffer(tty)); #endif DFLOW(DEBUG_LOG(info->line,"rs_throttle %lu\n", tty->ldisc.chars_in_buffer(tty))); @@ -3238,9 +3181,7 @@ rs_unthrottle(struct tty_struct * tty) { struct e100_serial *info = (struct e100_serial *)tty->driver_data; #ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("unthrottle %s: %lu....\n", tty_name(tty, buf), + printk("unthrottle %s: %lu....\n", tty_name(tty), (unsigned long)tty->ldisc.chars_in_buffer(tty)); #endif DFLOW(DEBUG_LOG(info->line,"rs_unthrottle ldisc %d\n", tty->ldisc.chars_in_buffer(tty))); @@ -3725,16 +3666,6 @@ rs_close(struct tty_struct *tty, struct file * filp) #if defined(CONFIG_ETRAX_RS485_ON_PA) *R_PORT_PA_DATA = port_pa_data_shadow &= ~(1 << rs485_pa_bit); #endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - rs485_port_g_bit, 0); -#endif -#if defined(CONFIG_ETRAX_RS485_LTC1387) - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_DXEN_PORT_G_BIT, 0); - REG_SHADOW_SET(R_PORT_G_DATA, port_g_data_shadow, - CONFIG_ETRAX_RS485_LTC1387_RXEN_PORT_G_BIT, 0); -#endif } #endif @@ -4263,15 +4194,6 @@ static int __init rs_init(void) return -EBUSY; } #endif -#if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit, - rs485_port_g_bit)) { - printk(KERN_ERR "ETRAX100LX serial: Could not allocate " - "RS485 pin\n"); - put_tty_driver(driver); - return -EBUSY; - } -#endif #endif /* Initialize the tty_driver structure */ diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index 6dc471e30e79..f09636083426 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -72,6 +72,7 @@ static int __init parse_options(struct earlycon_device *device, char *options) switch (port->iotype) { case UPIO_MEM32: + case UPIO_MEM32BE: port->regshift = 2; /* fall-through */ case UPIO_MEM: port->mapbase = addr; @@ -90,9 +91,11 @@ static int __init parse_options(struct earlycon_device *device, char *options) strlcpy(device->options, options, length); } - if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32) + if (port->iotype == UPIO_MEM || port->iotype == UPIO_MEM32 || + port->iotype == UPIO_MEM32BE) pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", - (port->iotype == UPIO_MEM32) ? "32" : "", + (port->iotype == UPIO_MEM) ? "" : + (port->iotype == UPIO_MEM32) ? "32" : "32be", (unsigned long long)port->mapbase, device->options); else @@ -133,7 +136,7 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match) * * Registers the earlycon console matching the earlycon specified * in the param string @buf. Acceptable param strings are of the form - * <name>,io|mmio|mmio32,<addr>,<options> + * <name>,io|mmio|mmio32|mmio32be,<addr>,<options> * <name>,0x<addr>,<options> * <name>,<options> * <name> diff --git a/drivers/tty/serial/icom.c b/drivers/tty/serial/icom.c index 45fc323b95e6..ffc7cb2585a6 100644 --- a/drivers/tty/serial/icom.c +++ b/drivers/tty/serial/icom.c @@ -1504,7 +1504,8 @@ static int icom_probe(struct pci_dev *dev, return retval; } - if ( (retval = pci_request_regions(dev, "icom"))) { + retval = pci_request_regions(dev, "icom"); + if (retval) { dev_err(&dev->dev, "pci_request_regions FAILED\n"); pci_disable_device(dev); return retval; @@ -1512,7 +1513,8 @@ static int icom_probe(struct pci_dev *dev, pci_set_master(dev); - if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) { + retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg); + if (retval) { dev_err(&dev->dev, "PCI Config read FAILED\n"); return retval; } @@ -1556,9 +1558,8 @@ static int icom_probe(struct pci_dev *dev, } /* save off irq and request irq line */ - if ( (retval = request_irq(dev->irq, icom_interrupt, - IRQF_SHARED, ICOM_DRIVER_NAME, - (void *) icom_adapter))) { + retval = request_irq(dev->irq, icom_interrupt, IRQF_SHARED, ICOM_DRIVER_NAME, (void *)icom_adapter); + if (retval) { goto probe_exit2; } diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c index 590390970996..536a33b99be9 100644 --- a/drivers/tty/serial/ifx6x60.c +++ b/drivers/tty/serial/ifx6x60.c @@ -1175,7 +1175,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ret = request_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_spi_reset_interrupt, IRQF_TRIGGER_RISING|IRQF_TRIGGER_FALLING, DRVNAME, - (void *)ifx_dev); + ifx_dev); if (ret) { dev_err(&spi->dev, "Unable to get irq %x\n", gpio_to_irq(ifx_dev->gpio.reset_out)); @@ -1185,9 +1185,8 @@ static int ifx_spi_spi_probe(struct spi_device *spi) ret = ifx_spi_reset(ifx_dev); ret = request_irq(gpio_to_irq(ifx_dev->gpio.srdy), - ifx_spi_srdy_interrupt, - IRQF_TRIGGER_RISING, DRVNAME, - (void *)ifx_dev); + ifx_spi_srdy_interrupt, IRQF_TRIGGER_RISING, DRVNAME, + ifx_dev); if (ret) { dev_err(&spi->dev, "Unable to get irq %x", gpio_to_irq(ifx_dev->gpio.srdy)); @@ -1212,7 +1211,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi) return 0; error_ret7: - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); + free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev); error_ret6: gpio_free(ifx_dev->gpio.srdy); error_ret5: @@ -1243,8 +1242,8 @@ static int ifx_spi_spi_remove(struct spi_device *spi) /* stop activity */ tasklet_kill(&ifx_dev->io_work_tasklet); /* free irq */ - free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), (void *)ifx_dev); - free_irq(gpio_to_irq(ifx_dev->gpio.srdy), (void *)ifx_dev); + free_irq(gpio_to_irq(ifx_dev->gpio.reset_out), ifx_dev); + free_irq(gpio_to_irq(ifx_dev->gpio.srdy), ifx_dev); gpio_free(ifx_dev->gpio.srdy); gpio_free(ifx_dev->gpio.mrdy); @@ -1381,7 +1380,7 @@ static void __exit ifx_spi_exit(void) /* unregister */ tty_unregister_driver(tty_drv); put_tty_driver(tty_drv); - spi_unregister_driver((void *)&ifx_spi_driver); + spi_unregister_driver(&ifx_spi_driver); unregister_reboot_notifier(&ifx_modem_reboot_notifier_block); } @@ -1420,7 +1419,7 @@ static int __init ifx_spi_init(void) goto err_free_tty; } - result = spi_register_driver((void *)&ifx_spi_driver); + result = spi_register_driver(&ifx_spi_driver); if (result) { pr_err("%s: spi_register_driver failed(%d)", DRVNAME, result); @@ -1436,7 +1435,7 @@ static int __init ifx_spi_init(void) return 0; err_unreg_spi: - spi_unregister_driver((void *)&ifx_spi_driver); + spi_unregister_driver(&ifx_spi_driver); err_unreg_tty: tty_unregister_driver(tty_drv); err_free_tty: diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 88250395b0ce..2c90dc31bfaa 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -239,7 +239,7 @@ static struct imx_uart_data imx_uart_devdata[] = { }, }; -static struct platform_device_id imx_uart_devtype[] = { +static const struct platform_device_id imx_uart_devtype[] = { { .name = "imx1-uart", .driver_data = (kernel_ulong_t) &imx_uart_devdata[IMX1_UART], @@ -853,7 +853,7 @@ static void imx_break_ctl(struct uart_port *port, int break_state) #define TXTL 2 /* reset default */ #define RXTL 1 /* reset default */ -static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) +static void imx_setup_ufcr(struct imx_port *sport, unsigned int mode) { unsigned int val; @@ -861,7 +861,6 @@ static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); val |= TXTL << UFCR_TXTL_SHF | RXTL; writel(val, sport->port.membase + UFCR); - return 0; } #define RX_BUF_SIZE (PAGE_SIZE) @@ -1122,6 +1121,12 @@ static int imx_startup(struct uart_port *port) writel(temp & ~UCR4_DREN, sport->port.membase + UCR4); + /* Can we enable the DMA support? */ + if (is_imx6q_uart(sport) && !uart_console(port) && + !sport->dma_is_inited) + imx_uart_dma_init(sport); + + spin_lock_irqsave(&sport->port.lock, flags); /* Reset fifo's and state machines */ i = 100; @@ -1132,13 +1137,6 @@ static int imx_startup(struct uart_port *port) while (!(readl(sport->port.membase + UCR2) & UCR2_SRST) && (--i > 0)) udelay(1); - /* Can we enable the DMA support? */ - if (is_imx6q_uart(sport) && !uart_console(port) && - !sport->dma_is_inited) - imx_uart_dma_init(sport); - - spin_lock_irqsave(&sport->port.lock, flags); - /* * Finally, clear and enable interrupts */ diff --git a/drivers/tty/serial/ioc3_serial.c b/drivers/tty/serial/ioc3_serial.c index abd7ea26ed9a..27b5fefac171 100644 --- a/drivers/tty/serial/ioc3_serial.c +++ b/drivers/tty/serial/ioc3_serial.c @@ -2137,7 +2137,8 @@ ioc3uart_probe(struct ioc3_submodule *is, struct ioc3_driver_data *idd) /* register port with the serial core */ - if ((ret = ioc3_serial_core_attach(is, idd))) + ret = ioc3_serial_core_attach(is, idd); + if (ret) goto out4; Num_of_ioc3_cards++; diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c index aa28209f44c1..e5c42fef69d2 100644 --- a/drivers/tty/serial/ioc4_serial.c +++ b/drivers/tty/serial/ioc4_serial.c @@ -1011,7 +1011,8 @@ static irqreturn_t ioc4_intr(int irq, void *arg) */ for (xx = 0; xx < num_intrs; xx++) { intr_info = &soft->is_intr_type[intr_type].is_intr_info[xx]; - if ((this_mir = this_ir & intr_info->sd_bits)) { + this_mir = this_ir & intr_info->sd_bits; + if (this_mir) { /* Disable owned interrupts, call handler */ handled++; write_ireg(soft, intr_info->sd_bits, IOC4_W_IEC, @@ -2865,10 +2866,12 @@ ioc4_serial_attach_one(struct ioc4_driver_data *idd) /* register port with the serial core - 1 rs232, 1 rs422 */ - if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232))) + ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS232); + if (ret) goto out4; - if ((ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422))) + ret = ioc4_serial_core_attach(idd->idd_pdev, PROTO_RS422); + if (ret) goto out5; Num_of_ioc4_cards++; diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c index 129dc5be6028..117df151627d 100644 --- a/drivers/tty/serial/kgdb_nmi.c +++ b/drivers/tty/serial/kgdb_nmi.c @@ -173,18 +173,18 @@ static int kgdb_nmi_poll_one_knock(void) bool kgdb_nmi_poll_knock(void) { if (kgdb_nmi_knock < 0) - return 1; + return true; while (1) { int ret; ret = kgdb_nmi_poll_one_knock(); if (ret == NO_POLL_CHAR) - return 0; + return false; else if (ret == 1) break; } - return 1; + return true; } /* diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index a9b0ab38a68c..02eb32217685 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -597,7 +597,7 @@ console_initcall(mcf_console_init); #define MCF_CONSOLE NULL /****************************************************************************/ -#endif /* CONFIG_MCF_CONSOLE */ +#endif /* CONFIG_SERIAL_MCF_CONSOLE */ /****************************************************************************/ /* diff --git a/drivers/tty/serial/meson_uart.c b/drivers/tty/serial/meson_uart.c index 67c036702629..0fc83c962d10 100644 --- a/drivers/tty/serial/meson_uart.c +++ b/drivers/tty/serial/meson_uart.c @@ -370,7 +370,7 @@ static int meson_uart_verify_port(struct uart_port *port, static void meson_uart_release_port(struct uart_port *port) { if (port->flags & UPF_IOREMAP) { - iounmap(port->membase); + devm_iounmap(port->dev, port->membase); port->membase = NULL; } } diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 1589f17c1fca..6fc07eb9d74e 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -405,7 +405,7 @@ static struct psc_ops mpc5200b_psc_ops = { .get_mr1 = mpc52xx_psc_get_mr1, }; -#endif /* CONFIG_MPC52xx */ +#endif /* CONFIG_PPC_MPC52xx */ #ifdef CONFIG_PPC_MPC512x #define FIFO_512x(port) ((struct mpc512x_psc_fifo __iomem *)(PSC(port)+1)) diff --git a/drivers/tty/serial/mpsc.c b/drivers/tty/serial/mpsc.c index 856fd5a5fa3c..82bb6d1fe23b 100644 --- a/drivers/tty/serial/mpsc.c +++ b/drivers/tty/serial/mpsc.c @@ -913,7 +913,8 @@ static int mpsc_make_ready(struct mpsc_port_info *pi) if (!pi->ready) { mpsc_init_hw(pi); - if ((rc = mpsc_alloc_ring_mem(pi))) + rc = mpsc_alloc_ring_mem(pi); + if (rc) return rc; mpsc_init_rings(pi); pi->ready = 1; @@ -1895,7 +1896,8 @@ static int mpsc_shared_drv_probe(struct platform_device *dev) int rc = -ENODEV; if (dev->id == 0) { - if (!(rc = mpsc_shared_map_regs(dev))) { + rc = mpsc_shared_map_regs(dev); + if (!rc) { pdata = (struct mpsc_shared_pdata *) dev_get_platdata(&dev->dev); @@ -2081,14 +2083,16 @@ static int mpsc_drv_probe(struct platform_device *dev) if (dev->id < MPSC_NUM_CTLRS) { pi = &mpsc_ports[dev->id]; - if (!(rc = mpsc_drv_map_regs(pi, dev))) { + rc = mpsc_drv_map_regs(pi, dev); + if (!rc) { mpsc_drv_get_platform_data(pi, dev, dev->id); pi->port.dev = &dev->dev; - if (!(rc = mpsc_make_ready(pi))) { + rc = mpsc_make_ready(pi); + if (!rc) { spin_lock_init(&pi->tx_lock); - if (!(rc = uart_add_one_port(&mpsc_reg, - &pi->port))) { + rc = uart_add_one_port(&mpsc_reg, &pi->port); + if (!rc) { rc = 0; } else { mpsc_release_port((struct uart_port *) @@ -2136,9 +2140,12 @@ static int __init mpsc_drv_init(void) memset(mpsc_ports, 0, sizeof(mpsc_ports)); memset(&mpsc_shared_regs, 0, sizeof(mpsc_shared_regs)); - if (!(rc = uart_register_driver(&mpsc_reg))) { - if (!(rc = platform_driver_register(&mpsc_shared_driver))) { - if ((rc = platform_driver_register(&mpsc_driver))) { + rc = uart_register_driver(&mpsc_reg); + if (!rc) { + rc = platform_driver_register(&mpsc_shared_driver); + if (!rc) { + rc = platform_driver_register(&mpsc_driver); + if (rc) { platform_driver_unregister(&mpsc_shared_driver); uart_unregister_driver(&mpsc_reg); } diff --git a/drivers/tty/serial/msm_smd_tty.c b/drivers/tty/serial/msm_smd_tty.c deleted file mode 100644 index 1238ac370bff..000000000000 --- a/drivers/tty/serial/msm_smd_tty.c +++ /dev/null @@ -1,232 +0,0 @@ -/* - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2011, Code Aurora Forum. All rights reserved. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/cdev.h> -#include <linux/device.h> -#include <linux/wait.h> - -#include <linux/tty.h> -#include <linux/tty_driver.h> -#include <linux/tty_flip.h> - -#include <mach/msm_smd.h> - -#define MAX_SMD_TTYS 32 - -struct smd_tty_info { - struct tty_port port; - smd_channel_t *ch; -}; - -struct smd_tty_channel_desc { - int id; - const char *name; -}; - -static struct smd_tty_info smd_tty[MAX_SMD_TTYS]; - -static const struct smd_tty_channel_desc smd_default_tty_channels[] = { - { .id = 0, .name = "SMD_DS" }, - { .id = 27, .name = "SMD_GPSNMEA" }, -}; - -static const struct smd_tty_channel_desc *smd_tty_channels = - smd_default_tty_channels; -static int smd_tty_channels_len = ARRAY_SIZE(smd_default_tty_channels); - -static void smd_tty_notify(void *priv, unsigned event) -{ - unsigned char *ptr; - int avail; - struct smd_tty_info *info = priv; - struct tty_struct *tty; - - if (event != SMD_EVENT_DATA) - return; - - tty = tty_port_tty_get(&info->port); - if (!tty) - return; - - for (;;) { - if (test_bit(TTY_THROTTLED, &tty->flags)) - break; - avail = smd_read_avail(info->ch); - if (avail == 0) - break; - - avail = tty_prepare_flip_string(&info->port, &ptr, avail); - - if (smd_read(info->ch, ptr, avail) != avail) { - /* shouldn't be possible since we're in interrupt - ** context here and nobody else could 'steal' our - ** characters. - */ - pr_err("OOPS - smd_tty_buffer mismatch?!"); - } - - tty_flip_buffer_push(&info->port); - } - - /* XXX only when writable and necessary */ - tty_wakeup(tty); - tty_kref_put(tty); -} - -static int smd_tty_port_activate(struct tty_port *tport, struct tty_struct *tty) -{ - struct smd_tty_info *info = container_of(tport, struct smd_tty_info, - port); - int i, res = 0; - const char *name = NULL; - - for (i = 0; i < smd_tty_channels_len; i++) { - if (smd_tty_channels[i].id == tty->index) { - name = smd_tty_channels[i].name; - break; - } - } - if (!name) - return -ENODEV; - - if (info->ch) - smd_kick(info->ch); - else - res = smd_open(name, &info->ch, info, smd_tty_notify); - - if (!res) - tty->driver_data = info; - - return res; -} - -static void smd_tty_port_shutdown(struct tty_port *tport) -{ - struct smd_tty_info *info = container_of(tport, struct smd_tty_info, - port); - - if (info->ch) { - smd_close(info->ch); - info->ch = 0; - } -} - -static int smd_tty_open(struct tty_struct *tty, struct file *f) -{ - struct smd_tty_info *info = smd_tty + tty->index; - - return tty_port_open(&info->port, tty, f); -} - -static void smd_tty_close(struct tty_struct *tty, struct file *f) -{ - struct smd_tty_info *info = tty->driver_data; - - tty_port_close(&info->port, tty, f); -} - -static int smd_tty_write(struct tty_struct *tty, - const unsigned char *buf, int len) -{ - struct smd_tty_info *info = tty->driver_data; - int avail; - - /* if we're writing to a packet channel we will - ** never be able to write more data than there - ** is currently space for - */ - avail = smd_write_avail(info->ch); - if (len > avail) - len = avail; - - return smd_write(info->ch, buf, len); -} - -static int smd_tty_write_room(struct tty_struct *tty) -{ - struct smd_tty_info *info = tty->driver_data; - return smd_write_avail(info->ch); -} - -static int smd_tty_chars_in_buffer(struct tty_struct *tty) -{ - struct smd_tty_info *info = tty->driver_data; - return smd_read_avail(info->ch); -} - -static void smd_tty_unthrottle(struct tty_struct *tty) -{ - struct smd_tty_info *info = tty->driver_data; - smd_kick(info->ch); -} - -static const struct tty_port_operations smd_tty_port_ops = { - .shutdown = smd_tty_port_shutdown, - .activate = smd_tty_port_activate, -}; - -static const struct tty_operations smd_tty_ops = { - .open = smd_tty_open, - .close = smd_tty_close, - .write = smd_tty_write, - .write_room = smd_tty_write_room, - .chars_in_buffer = smd_tty_chars_in_buffer, - .unthrottle = smd_tty_unthrottle, -}; - -static struct tty_driver *smd_tty_driver; - -static int __init smd_tty_init(void) -{ - int ret, i; - - smd_tty_driver = alloc_tty_driver(MAX_SMD_TTYS); - if (smd_tty_driver == 0) - return -ENOMEM; - - smd_tty_driver->driver_name = "smd_tty_driver"; - smd_tty_driver->name = "smd"; - smd_tty_driver->major = 0; - smd_tty_driver->minor_start = 0; - smd_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - smd_tty_driver->subtype = SERIAL_TYPE_NORMAL; - smd_tty_driver->init_termios = tty_std_termios; - smd_tty_driver->init_termios.c_iflag = 0; - smd_tty_driver->init_termios.c_oflag = 0; - smd_tty_driver->init_termios.c_cflag = B38400 | CS8 | CREAD; - smd_tty_driver->init_termios.c_lflag = 0; - smd_tty_driver->flags = TTY_DRIVER_RESET_TERMIOS | - TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV; - tty_set_operations(smd_tty_driver, &smd_tty_ops); - - ret = tty_register_driver(smd_tty_driver); - if (ret) - return ret; - - for (i = 0; i < smd_tty_channels_len; i++) { - struct tty_port *port = &smd_tty[smd_tty_channels[i].id].port; - tty_port_init(port); - port->ops = &smd_tty_port_ops; - tty_port_register_device(port, smd_tty_driver, - smd_tty_channels[i].id, NULL); - } - - return 0; -} - -module_init(smd_tty_init); diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index f7e5825b55ab..13cf7738fbdc 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -169,7 +169,7 @@ struct mxs_auart_port { bool ms_irq_enabled; }; -static struct platform_device_id mxs_auart_devtype[] = { +static const struct platform_device_id mxs_auart_devtype[] = { { .name = "mxs-auart-imx23", .driver_data = IMX23_AUART }, { .name = "mxs-auart-imx28", .driver_data = IMX28_AUART }, { /* sentinel */ } diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 137381e649e5..6823df99bd76 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -67,14 +67,17 @@ static int of_platform_serial_setup(struct platform_device *ofdev, if (of_property_read_u32(np, "clock-frequency", &clk)) { /* Get clk rate through clk driver if present */ - info->clk = clk_get(&ofdev->dev, NULL); + info->clk = devm_clk_get(&ofdev->dev, NULL); if (IS_ERR(info->clk)) { dev_warn(&ofdev->dev, "clk or clock-frequency not defined\n"); return PTR_ERR(info->clk); } - clk_prepare_enable(info->clk); + ret = clk_prepare_enable(info->clk); + if (ret < 0) + return ret; + clk = clk_get_rate(info->clk); } /* If current-speed was set, then try not to change it. */ @@ -188,7 +191,6 @@ static int of_platform_serial_probe(struct platform_device *ofdev) { struct uart_8250_port port8250; memset(&port8250, 0, sizeof(port8250)); - port.type = port_type; port8250.port = port; if (port.fifosize) diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index a0ae942d9562..67d0c213b1c7 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -348,7 +348,7 @@ static void s3c24xx_serial_start_next_tx(struct s3c24xx_uart_port *ourport) s3c24xx_serial_start_tx_dma(ourport, count); } -void s3c24xx_serial_start_tx(struct uart_port *port) +static void s3c24xx_serial_start_tx(struct uart_port *port) { struct s3c24xx_uart_port *ourport = to_ourport(port); struct circ_buf *xmit = &port->state->xmit; @@ -2337,7 +2337,7 @@ static struct s3c24xx_serial_drv_data exynos5433_serial_drv_data = { #define EXYNOS5433_SERIAL_DRV_DATA (kernel_ulong_t)NULL #endif -static struct platform_device_id s3c24xx_serial_driver_ids[] = { +static const struct platform_device_id s3c24xx_serial_driver_ids[] = { { .name = "s3c2410-uart", .driver_data = S3C2410_SERIAL_DRV_DATA, diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 468354ef7baa..9e6576004a42 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -25,6 +25,7 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/tty_flip.h> +#include <linux/spi/spi.h> #include <linux/uaccess.h> #define SC16IS7XX_NAME "sc16is7xx" @@ -300,25 +301,38 @@ struct sc16is7xx_devtype { int nr_uart; }; +#define SC16IS7XX_RECONF_MD (1 << 0) +#define SC16IS7XX_RECONF_IER (1 << 1) +#define SC16IS7XX_RECONF_RS485 (1 << 2) + +struct sc16is7xx_one_config { + unsigned int flags; + u8 ier_clear; +}; + struct sc16is7xx_one { struct uart_port port; - struct work_struct tx_work; - struct work_struct md_work; + struct kthread_work tx_work; + struct kthread_work reg_work; + struct sc16is7xx_one_config config; }; struct sc16is7xx_port { struct uart_driver uart; struct sc16is7xx_devtype *devtype; struct regmap *regmap; - struct mutex mutex; struct clk *clk; #ifdef CONFIG_GPIOLIB struct gpio_chip gpio; #endif unsigned char buf[SC16IS7XX_FIFO_SIZE]; + struct kthread_worker kworker; + struct task_struct *kworker_task; + struct kthread_work irq_work; struct sc16is7xx_one p[0]; }; +#define to_sc16is7xx_port(p,e) ((container_of((p), struct sc16is7xx_port, e))) #define to_sc16is7xx_one(p,e) ((container_of((p), struct sc16is7xx_one, e))) static u8 sc16is7xx_port_read(struct uart_port *port, u8 reg) @@ -615,9 +629,7 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) !!(msr & SC16IS7XX_MSR_CTS_BIT)); break; case SC16IS7XX_IIR_THRI_SRC: - mutex_lock(&s->mutex); sc16is7xx_handle_tx(port); - mutex_unlock(&s->mutex); break; default: dev_err_ratelimited(port->dev, @@ -628,81 +640,115 @@ static void sc16is7xx_port_irq(struct sc16is7xx_port *s, int portno) } while (1); } -static irqreturn_t sc16is7xx_ist(int irq, void *dev_id) +static void sc16is7xx_ist(struct kthread_work *ws) { - struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; + struct sc16is7xx_port *s = to_sc16is7xx_port(ws, irq_work); int i; for (i = 0; i < s->uart.nr; ++i) sc16is7xx_port_irq(s, i); +} + +static irqreturn_t sc16is7xx_irq(int irq, void *dev_id) +{ + struct sc16is7xx_port *s = (struct sc16is7xx_port *)dev_id; + + queue_kthread_work(&s->kworker, &s->irq_work); return IRQ_HANDLED; } -static void sc16is7xx_wq_proc(struct work_struct *ws) +static void sc16is7xx_tx_proc(struct kthread_work *ws) { - struct sc16is7xx_one *one = to_sc16is7xx_one(ws, tx_work); - struct sc16is7xx_port *s = dev_get_drvdata(one->port.dev); + struct uart_port *port = &(to_sc16is7xx_one(ws, tx_work)->port); + + if ((port->rs485.flags & SER_RS485_ENABLED) && + (port->rs485.delay_rts_before_send > 0)) + msleep(port->rs485.delay_rts_before_send); - mutex_lock(&s->mutex); - sc16is7xx_handle_tx(&one->port); - mutex_unlock(&s->mutex); + sc16is7xx_handle_tx(port); } -static void sc16is7xx_stop_tx(struct uart_port* port) +static void sc16is7xx_reconf_rs485(struct uart_port *port) { - struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - struct circ_buf *xmit = &one->port.state->xmit; - - /* handle rs485 */ - if (port->rs485.flags & SER_RS485_ENABLED) { - /* do nothing if current tx not yet completed */ - int lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); - if (!(lsr & SC16IS7XX_LSR_TEMT_BIT)) - return; - - if (uart_circ_empty(xmit) && - (port->rs485.delay_rts_after_send > 0)) - mdelay(port->rs485.delay_rts_after_send); + const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT | + SC16IS7XX_EFCR_RTS_INVERT_BIT; + u32 efcr = 0; + struct serial_rs485 *rs485 = &port->rs485; + unsigned long irqflags; + + spin_lock_irqsave(&port->lock, irqflags); + if (rs485->flags & SER_RS485_ENABLED) { + efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT; + + if (rs485->flags & SER_RS485_RTS_AFTER_SEND) + efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT; } + spin_unlock_irqrestore(&port->lock, irqflags); - sc16is7xx_port_update(port, SC16IS7XX_IER_REG, - SC16IS7XX_IER_THRI_BIT, - 0); + sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr); } -static void sc16is7xx_stop_rx(struct uart_port* port) +static void sc16is7xx_reg_proc(struct kthread_work *ws) { + struct sc16is7xx_one *one = to_sc16is7xx_one(ws, reg_work); + struct sc16is7xx_one_config config; + unsigned long irqflags; + + spin_lock_irqsave(&one->port.lock, irqflags); + config = one->config; + memset(&one->config, 0, sizeof(one->config)); + spin_unlock_irqrestore(&one->port.lock, irqflags); + + if (config.flags & SC16IS7XX_RECONF_MD) + sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, + SC16IS7XX_MCR_LOOP_BIT, + (one->port.mctrl & TIOCM_LOOP) ? + SC16IS7XX_MCR_LOOP_BIT : 0); + + if (config.flags & SC16IS7XX_RECONF_IER) + sc16is7xx_port_update(&one->port, SC16IS7XX_IER_REG, + config.ier_clear, 0); + + if (config.flags & SC16IS7XX_RECONF_RS485) + sc16is7xx_reconf_rs485(&one->port); +} + +static void sc16is7xx_ier_clear(struct uart_port *port, u8 bit) +{ + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - one->port.read_status_mask &= ~SC16IS7XX_LSR_DR_BIT; - sc16is7xx_port_update(port, SC16IS7XX_IER_REG, - SC16IS7XX_LSR_DR_BIT, - 0); + one->config.flags |= SC16IS7XX_RECONF_IER; + one->config.ier_clear |= bit; + queue_kthread_work(&s->kworker, &one->reg_work); +} + +static void sc16is7xx_stop_tx(struct uart_port *port) +{ + sc16is7xx_ier_clear(port, SC16IS7XX_IER_THRI_BIT); +} + +static void sc16is7xx_stop_rx(struct uart_port *port) +{ + sc16is7xx_ier_clear(port, SC16IS7XX_IER_RDI_BIT); } static void sc16is7xx_start_tx(struct uart_port *port) { + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - /* handle rs485 */ - if ((port->rs485.flags & SER_RS485_ENABLED) && - (port->rs485.delay_rts_before_send > 0)) { - mdelay(port->rs485.delay_rts_before_send); - } - - if (!work_pending(&one->tx_work)) - schedule_work(&one->tx_work); + queue_kthread_work(&s->kworker, &one->tx_work); } static unsigned int sc16is7xx_tx_empty(struct uart_port *port) { - unsigned int lvl, lsr; + unsigned int lsr; - lvl = sc16is7xx_port_read(port, SC16IS7XX_TXLVL_REG); lsr = sc16is7xx_port_read(port, SC16IS7XX_LSR_REG); - return ((lsr & SC16IS7XX_LSR_THRE_BIT) && !lvl) ? TIOCSER_TEMT : 0; + return (lsr & SC16IS7XX_LSR_TEMT_BIT) ? TIOCSER_TEMT : 0; } static unsigned int sc16is7xx_get_mctrl(struct uart_port *port) @@ -713,21 +759,13 @@ static unsigned int sc16is7xx_get_mctrl(struct uart_port *port) return TIOCM_DSR | TIOCM_CAR; } -static void sc16is7xx_md_proc(struct work_struct *ws) -{ - struct sc16is7xx_one *one = to_sc16is7xx_one(ws, md_work); - - sc16is7xx_port_update(&one->port, SC16IS7XX_MCR_REG, - SC16IS7XX_MCR_LOOP_BIT, - (one->port.mctrl & TIOCM_LOOP) ? - SC16IS7XX_MCR_LOOP_BIT : 0); -} - static void sc16is7xx_set_mctrl(struct uart_port *port, unsigned int mctrl) { + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); - schedule_work(&one->md_work); + one->config.flags |= SC16IS7XX_RECONF_MD; + queue_kthread_work(&s->kworker, &one->reg_work); } static void sc16is7xx_break_ctl(struct uart_port *port, int break_state) @@ -831,9 +869,8 @@ static void sc16is7xx_set_termios(struct uart_port *port, static int sc16is7xx_config_rs485(struct uart_port *port, struct serial_rs485 *rs485) { - const u32 mask = SC16IS7XX_EFCR_AUTO_RS485_BIT | - SC16IS7XX_EFCR_RTS_INVERT_BIT; - u32 efcr = 0; + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + struct sc16is7xx_one *one = to_sc16is7xx_one(port, port); if (rs485->flags & SER_RS485_ENABLED) { bool rts_during_rx, rts_during_tx; @@ -841,21 +878,23 @@ static int sc16is7xx_config_rs485(struct uart_port *port, rts_during_rx = rs485->flags & SER_RS485_RTS_AFTER_SEND; rts_during_tx = rs485->flags & SER_RS485_RTS_ON_SEND; - efcr |= SC16IS7XX_EFCR_AUTO_RS485_BIT; - - if (!rts_during_rx && rts_during_tx) - /* default */; - else if (rts_during_rx && !rts_during_tx) - efcr |= SC16IS7XX_EFCR_RTS_INVERT_BIT; - else + if (rts_during_rx == rts_during_tx) dev_err(port->dev, "unsupported RTS signalling on_send:%d after_send:%d - exactly one of RS485 RTS flags should be set\n", rts_during_tx, rts_during_rx); - } - sc16is7xx_port_update(port, SC16IS7XX_EFCR_REG, mask, efcr); + /* + * RTS signal is handled by HW, it's timing can't be influenced. + * However, it's sometimes useful to delay TX even without RTS + * control therefore we try to handle .delay_rts_before_send. + */ + if (rs485->delay_rts_after_send) + return -EINVAL; + } port->rs485 = *rs485; + one->config.flags |= SC16IS7XX_RECONF_RS485; + queue_kthread_work(&s->kworker, &one->reg_work); return 0; } @@ -916,6 +955,8 @@ static int sc16is7xx_startup(struct uart_port *port) static void sc16is7xx_shutdown(struct uart_port *port) { + struct sc16is7xx_port *s = dev_get_drvdata(port->dev); + /* Disable all interrupts */ sc16is7xx_port_write(port, SC16IS7XX_IER_REG, 0); /* Disable TX/RX */ @@ -926,6 +967,8 @@ static void sc16is7xx_shutdown(struct uart_port *port) SC16IS7XX_EFCR_TXDISABLE_BIT); sc16is7xx_power(port, 0); + + flush_kthread_worker(&s->kworker); } static const char *sc16is7xx_type(struct uart_port *port) @@ -1043,6 +1086,7 @@ static int sc16is7xx_probe(struct device *dev, struct sc16is7xx_devtype *devtype, struct regmap *regmap, int irq, unsigned long flags) { + struct sched_param sched_param = { .sched_priority = MAX_RT_PRIO / 2 }; unsigned long freq, *pfreq = dev_get_platdata(dev); int i, ret; struct sc16is7xx_port *s; @@ -1084,6 +1128,16 @@ static int sc16is7xx_probe(struct device *dev, goto out_clk; } + init_kthread_worker(&s->kworker); + init_kthread_work(&s->irq_work, sc16is7xx_ist); + s->kworker_task = kthread_run(kthread_worker_fn, &s->kworker, + "sc16is7xx"); + if (IS_ERR(s->kworker_task)) { + ret = PTR_ERR(s->kworker_task); + goto out_uart; + } + sched_setscheduler(s->kworker_task, SCHED_FIFO, &sched_param); + #ifdef CONFIG_GPIOLIB if (devtype->nr_gpio) { /* Setup GPIO cotroller */ @@ -1099,12 +1153,10 @@ static int sc16is7xx_probe(struct device *dev, s->gpio.can_sleep = 1; ret = gpiochip_add(&s->gpio); if (ret) - goto out_uart; + goto out_thread; } #endif - mutex_init(&s->mutex); - for (i = 0; i < devtype->nr_uart; ++i) { /* Initialize port data */ s->p[i].port.line = i; @@ -1123,10 +1175,9 @@ static int sc16is7xx_probe(struct device *dev, sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_EFCR_REG, SC16IS7XX_EFCR_RXDISABLE_BIT | SC16IS7XX_EFCR_TXDISABLE_BIT); - /* Initialize queue for start TX */ - INIT_WORK(&s->p[i].tx_work, sc16is7xx_wq_proc); - /* Initialize queue for changing mode */ - INIT_WORK(&s->p[i].md_work, sc16is7xx_md_proc); + /* Initialize kthread work structs */ + init_kthread_work(&s->p[i].tx_work, sc16is7xx_tx_proc); + init_kthread_work(&s->p[i].reg_work, sc16is7xx_reg_proc); /* Register port */ uart_add_one_port(&s->uart, &s->p[i].port); /* Go to suspend mode */ @@ -1134,22 +1185,23 @@ static int sc16is7xx_probe(struct device *dev, } /* Setup interrupt */ - ret = devm_request_threaded_irq(dev, irq, NULL, sc16is7xx_ist, - IRQF_ONESHOT | flags, dev_name(dev), s); + ret = devm_request_irq(dev, irq, sc16is7xx_irq, + IRQF_ONESHOT | flags, dev_name(dev), s); if (!ret) return 0; for (i = 0; i < s->uart.nr; i++) uart_remove_one_port(&s->uart, &s->p[i].port); - mutex_destroy(&s->mutex); - #ifdef CONFIG_GPIOLIB if (devtype->nr_gpio) gpiochip_remove(&s->gpio); -out_uart: +out_thread: #endif + kthread_stop(s->kworker_task); + +out_uart: uart_unregister_driver(&s->uart); out_clk: @@ -1170,13 +1222,13 @@ static int sc16is7xx_remove(struct device *dev) #endif for (i = 0; i < s->uart.nr; i++) { - cancel_work_sync(&s->p[i].tx_work); - cancel_work_sync(&s->p[i].md_work); uart_remove_one_port(&s->uart, &s->p[i].port); sc16is7xx_power(&s->p[i].port, 0); } - mutex_destroy(&s->mutex); + flush_kthread_worker(&s->kworker); + kthread_stop(s->kworker_task); + uart_unregister_driver(&s->uart); if (!IS_ERR(s->clk)) clk_disable_unprepare(s->clk); @@ -1204,6 +1256,75 @@ static struct regmap_config regcfg = { .precious_reg = sc16is7xx_regmap_precious, }; +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI +static int sc16is7xx_spi_probe(struct spi_device *spi) +{ + struct sc16is7xx_devtype *devtype; + unsigned long flags = 0; + struct regmap *regmap; + int ret; + + /* Setup SPI bus */ + spi->bits_per_word = 8; + /* only supports mode 0 on SC16IS762 */ + spi->mode = spi->mode ? : SPI_MODE_0; + spi->max_speed_hz = spi->max_speed_hz ? : 15000000; + ret = spi_setup(spi); + if (ret) + return ret; + + if (spi->dev.of_node) { + const struct of_device_id *of_id = + of_match_device(sc16is7xx_dt_ids, &spi->dev); + + devtype = (struct sc16is7xx_devtype *)of_id->data; + } else { + const struct spi_device_id *id_entry = spi_get_device_id(spi); + + devtype = (struct sc16is7xx_devtype *)id_entry->driver_data; + flags = IRQF_TRIGGER_FALLING; + } + + regcfg.max_register = (0xf << SC16IS7XX_REG_SHIFT) | + (devtype->nr_uart - 1); + regmap = devm_regmap_init_spi(spi, ®cfg); + + return sc16is7xx_probe(&spi->dev, devtype, regmap, spi->irq, flags); +} + +static int sc16is7xx_spi_remove(struct spi_device *spi) +{ + return sc16is7xx_remove(&spi->dev); +} + +static const struct spi_device_id sc16is7xx_spi_id_table[] = { + { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, + { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, + { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, + { "sc16is762", (kernel_ulong_t)&sc16is762_devtype, }, + { } +}; + +MODULE_DEVICE_TABLE(spi, sc16is7xx_spi_id_table); + +static struct spi_driver sc16is7xx_spi_uart_driver = { + .driver = { + .name = SC16IS7XX_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(sc16is7xx_dt_ids), + }, + .probe = sc16is7xx_spi_probe, + .remove = sc16is7xx_spi_remove, + .id_table = sc16is7xx_spi_id_table, +}; + +MODULE_ALIAS("spi:sc16is7xx"); +#endif + +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C static int sc16is7xx_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -1235,6 +1356,8 @@ static int sc16is7xx_i2c_remove(struct i2c_client *client) static const struct i2c_device_id sc16is7xx_i2c_id_table[] = { { "sc16is74x", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is740", (kernel_ulong_t)&sc16is74x_devtype, }, + { "sc16is741", (kernel_ulong_t)&sc16is74x_devtype, }, { "sc16is750", (kernel_ulong_t)&sc16is750_devtype, }, { "sc16is752", (kernel_ulong_t)&sc16is752_devtype, }, { "sc16is760", (kernel_ulong_t)&sc16is760_devtype, }, @@ -1253,8 +1376,43 @@ static struct i2c_driver sc16is7xx_i2c_uart_driver = { .remove = sc16is7xx_i2c_remove, .id_table = sc16is7xx_i2c_id_table, }; -module_i2c_driver(sc16is7xx_i2c_uart_driver); + MODULE_ALIAS("i2c:sc16is7xx"); +#endif + +static int __init sc16is7xx_init(void) +{ + int ret = 0; +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + ret = i2c_add_driver(&sc16is7xx_i2c_uart_driver); + if (ret < 0) { + pr_err("failed to init sc16is7xx i2c --> %d\n", ret); + return ret; + } +#endif + +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI + ret = spi_register_driver(&sc16is7xx_spi_uart_driver); + if (ret < 0) { + pr_err("failed to init sc16is7xx spi --> %d\n", ret); + return ret; + } +#endif + return ret; +} +module_init(sc16is7xx_init); + +static void __exit sc16is7xx_exit(void) +{ +#ifdef CONFIG_SERIAL_SC16IS7XX_I2C + i2c_del_driver(&sc16is7xx_i2c_uart_driver); +#endif + +#ifdef CONFIG_SERIAL_SC16IS7XX_SPI + spi_unregister_driver(&sc16is7xx_spi_uart_driver); +#endif +} +module_exit(sc16is7xx_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Jon Ringle <jringle@gridpoint.com>"); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 1d5ea3964ee5..cf0133ae762d 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -131,8 +131,8 @@ struct tegra_uart_port { struct dma_async_tx_descriptor *rx_dma_desc; dma_cookie_t tx_cookie; dma_cookie_t rx_cookie; - int tx_bytes_requested; - int rx_bytes_requested; + unsigned int tx_bytes_requested; + unsigned int rx_bytes_requested; }; static void tegra_uart_start_next_tx(struct tegra_uart_port *tup); @@ -234,6 +234,22 @@ static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl) tup->lcr_shadow = lcr; } +/** + * tegra_uart_wait_cycle_time: Wait for N UART clock periods + * + * @tup: Tegra serial port data structure. + * @cycles: Number of clock periods to wait. + * + * Tegra UARTs are clocked at 16X the baud/bit rate and hence the UART + * clock speed is 16X the current baud rate. + */ +static void tegra_uart_wait_cycle_time(struct tegra_uart_port *tup, + unsigned int cycles) +{ + if (tup->current_baud) + udelay(DIV_ROUND_UP(cycles * 1000000, tup->current_baud * 16)); +} + /* Wait for a symbol-time. */ static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup, unsigned int syms) @@ -263,8 +279,12 @@ static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits) /* Dummy read to ensure the write is posted */ tegra_uart_read(tup, UART_SCR); - /* Wait for the flush to propagate. */ - tegra_uart_wait_sym_time(tup, 1); + /* + * For all tegra devices (up to t210), there is a hardware issue that + * requires software to wait for 32 UART clock periods for the flush + * to propagate, otherwise data could be lost. + */ + tegra_uart_wait_cycle_time(tup, 32); } static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud) @@ -388,9 +408,9 @@ static void tegra_uart_tx_dma_complete(void *args) struct circ_buf *xmit = &tup->uport.state->xmit; struct dma_tx_state state; unsigned long flags; - int count; + unsigned int count; - dmaengine_tx_status(tup->tx_dma_chan, tup->rx_cookie, &state); + dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state); count = tup->tx_bytes_requested - state.residue; async_tx_ack(tup->tx_dma_desc); spin_lock_irqsave(&tup->uport.lock, flags); @@ -480,7 +500,7 @@ static void tegra_uart_stop_tx(struct uart_port *u) struct tegra_uart_port *tup = to_tegra_uport(u); struct circ_buf *xmit = &tup->uport.state->xmit; struct dma_tx_state state; - int count; + unsigned int count; if (tup->tx_in_progress != TEGRA_UART_TX_DMA) return; @@ -530,10 +550,15 @@ static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup, } static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup, - struct tty_port *tty, int count) + struct tty_port *tty, + unsigned int count) { int copied; + /* If count is zero, then there is no data to be copied */ + if (!count) + return; + tup->uport.icount.rx += count; if (!tty) { dev_err(tup->uport.dev, "No tty port\n"); @@ -555,21 +580,30 @@ static void tegra_uart_rx_dma_complete(void *args) { struct tegra_uart_port *tup = args; struct uart_port *u = &tup->uport; - int count = tup->rx_bytes_requested; + unsigned int count = tup->rx_bytes_requested; struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); struct tty_port *port = &u->state->port; unsigned long flags; + struct dma_tx_state state; + enum dma_status status; - async_tx_ack(tup->rx_dma_desc); spin_lock_irqsave(&u->lock, flags); + status = dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state); + + if (status == DMA_IN_PROGRESS) { + dev_dbg(tup->uport.dev, "RX DMA is in progress\n"); + goto done; + } + + async_tx_ack(tup->rx_dma_desc); + /* Deactivate flow control to stop sender */ if (tup->rts_active) set_rts(tup, false); /* If we are here, DMA is stopped */ - if (count) - tegra_uart_copy_rx_to_tty(tup, port, count); + tegra_uart_copy_rx_to_tty(tup, port, count); tegra_uart_handle_rx_pio(tup, port); if (tty) { @@ -584,6 +618,7 @@ static void tegra_uart_rx_dma_complete(void *args) if (tup->rts_active) set_rts(tup, true); +done: spin_unlock_irqrestore(&u->lock, flags); } @@ -594,7 +629,7 @@ static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup, struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); struct tty_port *port = &tup->uport.state->port; struct uart_port *u = &tup->uport; - int count; + unsigned int count; /* Deactivate flow control to stop sender */ if (tup->rts_active) @@ -606,8 +641,7 @@ static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup, count = tup->rx_bytes_requested - state.residue; /* If we are here, DMA is stopped */ - if (count) - tegra_uart_copy_rx_to_tty(tup, port, count); + tegra_uart_copy_rx_to_tty(tup, port, count); tegra_uart_handle_rx_pio(tup, port); if (tty) { @@ -865,6 +899,16 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B; tegra_uart_write(tup, tup->fcr_shadow, UART_FCR); + /* Dummy read to ensure the write is posted */ + tegra_uart_read(tup, UART_SCR); + + /* + * For all tegra devices (up to t210), there is a hardware issue that + * requires software to wait for 3 UART clock periods after enabling + * the TX fifo, otherwise data could be lost. + */ + tegra_uart_wait_cycle_time(tup, 3); + /* * Initialize the UART with default configuration * (115200, N, 8, 1) so that the receive DMA buffer may be @@ -905,6 +949,28 @@ static int tegra_uart_hw_init(struct tegra_uart_port *tup) return 0; } +static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup, + bool dma_to_memory) +{ + if (dma_to_memory) { + dmaengine_terminate_all(tup->rx_dma_chan); + dma_release_channel(tup->rx_dma_chan); + dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE, + tup->rx_dma_buf_virt, tup->rx_dma_buf_phys); + tup->rx_dma_chan = NULL; + tup->rx_dma_buf_phys = 0; + tup->rx_dma_buf_virt = NULL; + } else { + dmaengine_terminate_all(tup->tx_dma_chan); + dma_release_channel(tup->tx_dma_chan); + dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys, + UART_XMIT_SIZE, DMA_TO_DEVICE); + tup->tx_dma_chan = NULL; + tup->tx_dma_buf_phys = 0; + tup->tx_dma_buf_virt = NULL; + } +} + static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, bool dma_to_memory) { @@ -933,67 +999,39 @@ static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup, dma_release_channel(dma_chan); return -ENOMEM; } + dma_sconfig.src_addr = tup->uport.mapbase; + dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; + dma_sconfig.src_maxburst = 4; + tup->rx_dma_chan = dma_chan; + tup->rx_dma_buf_virt = dma_buf; + tup->rx_dma_buf_phys = dma_phys; } else { dma_phys = dma_map_single(tup->uport.dev, tup->uport.state->xmit.buf, UART_XMIT_SIZE, DMA_TO_DEVICE); + if (dma_mapping_error(tup->uport.dev, dma_phys)) { + dev_err(tup->uport.dev, "dma_map_single tx failed\n"); + dma_release_channel(dma_chan); + return -ENOMEM; + } dma_buf = tup->uport.state->xmit.buf; - } - - if (dma_to_memory) { - dma_sconfig.src_addr = tup->uport.mapbase; - dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; - dma_sconfig.src_maxburst = 4; - } else { dma_sconfig.dst_addr = tup->uport.mapbase; dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; dma_sconfig.dst_maxburst = 16; + tup->tx_dma_chan = dma_chan; + tup->tx_dma_buf_virt = dma_buf; + tup->tx_dma_buf_phys = dma_phys; } ret = dmaengine_slave_config(dma_chan, &dma_sconfig); if (ret < 0) { dev_err(tup->uport.dev, "Dma slave config failed, err = %d\n", ret); - goto scrub; + tegra_uart_dma_channel_free(tup, dma_to_memory); + return ret; } - if (dma_to_memory) { - tup->rx_dma_chan = dma_chan; - tup->rx_dma_buf_virt = dma_buf; - tup->rx_dma_buf_phys = dma_phys; - } else { - tup->tx_dma_chan = dma_chan; - tup->tx_dma_buf_virt = dma_buf; - tup->tx_dma_buf_phys = dma_phys; - } return 0; - -scrub: - dma_release_channel(dma_chan); - return ret; -} - -static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup, - bool dma_to_memory) -{ - struct dma_chan *dma_chan; - - if (dma_to_memory) { - dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE, - tup->rx_dma_buf_virt, tup->rx_dma_buf_phys); - dma_chan = tup->rx_dma_chan; - tup->rx_dma_chan = NULL; - tup->rx_dma_buf_phys = 0; - tup->rx_dma_buf_virt = NULL; - } else { - dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys, - UART_XMIT_SIZE, DMA_TO_DEVICE); - dma_chan = tup->tx_dma_chan; - tup->tx_dma_chan = NULL; - tup->tx_dma_buf_phys = 0; - tup->tx_dma_buf_virt = NULL; - } - dma_release_channel(dma_chan); } static int tegra_uart_startup(struct uart_port *u) @@ -1060,8 +1098,6 @@ static void tegra_uart_shutdown(struct uart_port *u) tegra_uart_dma_channel_free(tup, true); tegra_uart_dma_channel_free(tup, false); free_irq(u->irq, tup); - - tegra_uart_flush_buffer(u); } static void tegra_uart_enable_ms(struct uart_port *u) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index 0b7bb12dfc68..7ae1592f7ec9 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -335,18 +335,29 @@ unsigned int uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, struct ktermios *old, unsigned int min, unsigned int max) { - unsigned int try, baud, altbaud = 38400; + unsigned int try; + unsigned int baud; + unsigned int altbaud; int hung_up = 0; upf_t flags = port->flags & UPF_SPD_MASK; - if (flags == UPF_SPD_HI) + switch (flags) { + case UPF_SPD_HI: altbaud = 57600; - else if (flags == UPF_SPD_VHI) + break; + case UPF_SPD_VHI: altbaud = 115200; - else if (flags == UPF_SPD_SHI) + break; + case UPF_SPD_SHI: altbaud = 230400; - else if (flags == UPF_SPD_WARP) + break; + case UPF_SPD_WARP: altbaud = 460800; + break; + default: + altbaud = 38400; + break; + } for (try = 0; try < 2; try++) { baud = tty_termios_baud_rate(termios); @@ -894,12 +905,10 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, * need to rate-limit; it's CAP_SYS_ADMIN only. */ if (uport->flags & UPF_SPD_MASK) { - char buf[64]; - dev_notice(uport->dev, "%s sets custom speed on %s. This is deprecated.\n", current->comm, - tty_name(port->tty, buf)); + tty_name(port->tty)); } uart_change_speed(tty, state, NULL); } @@ -1816,8 +1825,8 @@ uart_get_console(struct uart_port *ports, int nr, struct console *co) * @options: ptr for <options> field; NULL if not present (out) * * Decodes earlycon kernel command line parameters of the form - * earlycon=<name>,io|mmio|mmio32,<addr>,<options> - * console=<name>,io|mmio|mmio32,<addr>,<options> + * earlycon=<name>,io|mmio|mmio32|mmio32be,<addr>,<options> + * console=<name>,io|mmio|mmio32|mmio32be,<addr>,<options> * * The optional form * earlycon=<name>,0x<addr>,<options> @@ -1835,6 +1844,9 @@ int uart_parse_earlycon(char *p, unsigned char *iotype, unsigned long *addr, } else if (strncmp(p, "mmio32,", 7) == 0) { *iotype = UPIO_MEM32; p += 7; + } else if (strncmp(p, "mmio32be,", 9) == 0) { + *iotype = UPIO_MEM32BE; + p += 9; } else if (strncmp(p, "io,", 3) == 0) { *iotype = UPIO_PORT; p += 3; diff --git a/drivers/tty/serial/serial_ks8695.c b/drivers/tty/serial/serial_ks8695.c index 5c79bdab985d..b4decf8787de 100644 --- a/drivers/tty/serial/serial_ks8695.c +++ b/drivers/tty/serial/serial_ks8695.c @@ -328,7 +328,7 @@ static int ks8695uart_startup(struct uart_port *port) { int retval; - set_irq_flags(KS8695_IRQ_UART_TX, IRQF_VALID | IRQF_NOAUTOEN); + irq_modify_status(KS8695_IRQ_UART_TX, IRQ_NOREQUEST, IRQ_NOAUTOEN); tx_enable(port, 0); rx_enable(port, 1); ms_enable(port, 1); diff --git a/drivers/tty/serial/serial_mctrl_gpio.c b/drivers/tty/serial/serial_mctrl_gpio.c index d7b846d41630..402f7fb54133 100644 --- a/drivers/tty/serial/serial_mctrl_gpio.c +++ b/drivers/tty/serial/serial_mctrl_gpio.c @@ -49,8 +49,7 @@ void mctrl_gpio_set(struct mctrl_gpios *gpios, unsigned int mctrl) unsigned int count = 0; for (i = 0; i < UART_GPIO_MAX; i++) - if (!IS_ERR_OR_NULL(gpios->gpio[i]) && - mctrl_gpios_desc[i].dir_out) { + if (gpios->gpio[i] && mctrl_gpios_desc[i].dir_out) { desc_array[count] = gpios->gpio[i]; value_array[count] = !!(mctrl & mctrl_gpios_desc[i].mctrl); count++; @@ -118,7 +117,7 @@ void mctrl_gpio_free(struct device *dev, struct mctrl_gpios *gpios) enum mctrl_gpio_idx i; for (i = 0; i < UART_GPIO_MAX; i++) - if (!IS_ERR_OR_NULL(gpios->gpio[i])) + if (gpios->gpio[i]) devm_gpiod_put(dev, gpios->gpio[i]); devm_kfree(dev, gpios); } diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 95772cf4e7b0..1b2f894bdc9e 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -81,7 +81,8 @@ struct sci_port { /* Platform configuration */ struct plat_sci_port *cfg; - int overrun_bit; + unsigned int overrun_reg; + unsigned int overrun_mask; unsigned int error_mask; unsigned int sampling_rate; resource_size_t reg_size; @@ -168,6 +169,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -188,6 +191,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -207,6 +212,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, [HSSRR] = sci_reg_invalid, + [SCPCR] = { 0x30, 16 }, + [SCPDR] = { 0x34, 16 }, }, /* @@ -226,6 +233,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, [HSSRR] = sci_reg_invalid, + [SCPCR] = { 0x30, 16 }, + [SCPDR] = { 0x34, 16 }, }, /* @@ -246,6 +255,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = { 0x20, 16 }, [SCLSR] = { 0x24, 16 }, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -265,6 +276,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -284,6 +297,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = { 0x20, 16 }, [SCLSR] = { 0x24, 16 }, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -303,6 +318,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = { 0x20, 16 }, [SCLSR] = { 0x24, 16 }, [HSSRR] = { 0x40, 16 }, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -323,6 +340,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = sci_reg_invalid, [SCLSR] = { 0x24, 16 }, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -343,6 +362,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = { 0x24, 16 }, [SCLSR] = { 0x28, 16 }, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, /* @@ -363,6 +384,8 @@ static struct plat_sci_reg sci_regmap[SCIx_NR_REGTYPES][SCIx_NR_REGS] = { [SCSPTR] = sci_reg_invalid, [SCLSR] = sci_reg_invalid, [HSSRR] = sci_reg_invalid, + [SCPCR] = sci_reg_invalid, + [SCPDR] = sci_reg_invalid, }, }; @@ -781,7 +804,7 @@ static int sci_handle_errors(struct uart_port *port) struct sci_port *s = to_sci_port(port); /* Handle overruns */ - if (status & (1 << s->overrun_bit)) { + if (status & s->overrun_mask) { port->icount.overrun++; /* overrun error */ @@ -844,32 +867,17 @@ static int sci_handle_fifo_overrun(struct uart_port *port) struct tty_port *tport = &port->state->port; struct sci_port *s = to_sci_port(port); struct plat_sci_reg *reg; - int copied = 0, offset; - u16 status, bit; - - switch (port->type) { - case PORT_SCIF: - case PORT_HSCIF: - offset = SCLSR; - break; - case PORT_SCIFA: - case PORT_SCIFB: - offset = SCxSR; - break; - default: - return 0; - } + int copied = 0; + u16 status; - reg = sci_getreg(port, offset); + reg = sci_getreg(port, s->overrun_reg); if (!reg->size) return 0; - status = serial_port_in(port, offset); - bit = 1 << s->overrun_bit; - - if (status & bit) { - status &= ~bit; - serial_port_out(port, offset, status); + status = serial_port_in(port, s->overrun_reg); + if (status & s->overrun_mask) { + status &= ~s->overrun_mask; + serial_port_out(port, s->overrun_reg, status); port->icount.overrun++; @@ -1021,15 +1029,11 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) ssr_status = serial_port_in(port, SCxSR); scr_status = serial_port_in(port, SCSCR); - switch (port->type) { - case PORT_SCIF: - case PORT_HSCIF: - orer_status = serial_port_in(port, SCLSR); - break; - case PORT_SCIFA: - case PORT_SCIFB: + if (s->overrun_reg == SCxSR) orer_status = ssr_status; - break; + else { + if (sci_getreg(port, s->overrun_reg)->size) + orer_status = serial_port_in(port, s->overrun_reg); } err_enabled = scr_status & port_rx_irq_mask(port); @@ -1059,7 +1063,7 @@ static irqreturn_t sci_mpxed_interrupt(int irq, void *ptr) ret = sci_br_interrupt(irq, ptr); /* Overrun Interrupt */ - if (orer_status & (1 << s->overrun_bit)) + if (orer_status & s->overrun_mask) sci_handle_fifo_overrun(port); return ret; @@ -2226,32 +2230,38 @@ static int sci_init_single(struct platform_device *dev, switch (p->type) { case PORT_SCIFB: port->fifosize = 256; - sci_port->overrun_bit = 9; + sci_port->overrun_reg = SCxSR; + sci_port->overrun_mask = SCIFA_ORER; sampling_rate = 16; break; case PORT_HSCIF: port->fifosize = 128; sampling_rate = 0; - sci_port->overrun_bit = 0; + sci_port->overrun_reg = SCLSR; + sci_port->overrun_mask = SCLSR_ORER; break; case PORT_SCIFA: port->fifosize = 64; - sci_port->overrun_bit = 9; + sci_port->overrun_reg = SCxSR; + sci_port->overrun_mask = SCIFA_ORER; sampling_rate = 16; break; case PORT_SCIF: port->fifosize = 16; if (p->regtype == SCIx_SH7705_SCIF_REGTYPE) { - sci_port->overrun_bit = 9; + sci_port->overrun_reg = SCxSR; + sci_port->overrun_mask = SCIFA_ORER; sampling_rate = 16; } else { - sci_port->overrun_bit = 0; + sci_port->overrun_reg = SCLSR; + sci_port->overrun_mask = SCLSR_ORER; sampling_rate = 32; } break; default: port->fifosize = 1; - sci_port->overrun_bit = 5; + sci_port->overrun_reg = SCxSR; + sci_port->overrun_mask = SCI_ORER; sampling_rate = 32; break; } @@ -2297,15 +2307,11 @@ static int sci_init_single(struct platform_device *dev, SCI_DEFAULT_ERROR_MASK : SCIF_DEFAULT_ERROR_MASK; /* - * Establish sensible defaults for the overrun detection, unless - * the part has explicitly disabled support for it. - */ - - /* * Make the error mask inclusive of overrun detection, if * supported. */ - sci_port->error_mask |= 1 << sci_port->overrun_bit; + if (sci_port->overrun_reg == SCxSR) + sci_port->error_mask |= sci_port->overrun_mask; port->type = p->type; port->flags = UPF_FIXED_PORT | p->flags; diff --git a/drivers/tty/serial/sh-sci.h b/drivers/tty/serial/sh-sci.h index d5db81a0a430..3393f67b4e84 100644 --- a/drivers/tty/serial/sh-sci.h +++ b/drivers/tty/serial/sh-sci.h @@ -1,7 +1,115 @@ +#include <linux/bitops.h> #include <linux/serial_core.h> #include <linux/io.h> #include <linux/gpio.h> +#define SCI_MAJOR 204 +#define SCI_MINOR_START 8 + + +/* + * SCI register subset common for all port types. + * Not all registers will exist on all parts. + */ +enum { + SCSMR, /* Serial Mode Register */ + SCBRR, /* Bit Rate Register */ + SCSCR, /* Serial Control Register */ + SCxSR, /* Serial Status Register */ + SCFCR, /* FIFO Control Register */ + SCFDR, /* FIFO Data Count Register */ + SCxTDR, /* Transmit (FIFO) Data Register */ + SCxRDR, /* Receive (FIFO) Data Register */ + SCLSR, /* Line Status Register */ + SCTFDR, /* Transmit FIFO Data Count Register */ + SCRFDR, /* Receive FIFO Data Count Register */ + SCSPTR, /* Serial Port Register */ + HSSRR, /* Sampling Rate Register */ + SCPCR, /* Serial Port Control Register */ + SCPDR, /* Serial Port Data Register */ + + SCIx_NR_REGS, +}; + + +/* SCSMR (Serial Mode Register) */ +#define SCSMR_CHR BIT(6) /* 7-bit Character Length */ +#define SCSMR_PE BIT(5) /* Parity Enable */ +#define SCSMR_ODD BIT(4) /* Odd Parity */ +#define SCSMR_STOP BIT(3) /* Stop Bit Length */ +#define SCSMR_CKS 0x0003 /* Clock Select */ + +/* Serial Control Register, SCIFA/SCIFB only bits */ +#define SCSCR_TDRQE BIT(15) /* Tx Data Transfer Request Enable */ +#define SCSCR_RDRQE BIT(14) /* Rx Data Transfer Request Enable */ + +/* SCxSR (Serial Status Register) on SCI */ +#define SCI_TDRE BIT(7) /* Transmit Data Register Empty */ +#define SCI_RDRF BIT(6) /* Receive Data Register Full */ +#define SCI_ORER BIT(5) /* Overrun Error */ +#define SCI_FER BIT(4) /* Framing Error */ +#define SCI_PER BIT(3) /* Parity Error */ +#define SCI_TEND BIT(2) /* Transmit End */ +#define SCI_RESERVED 0x03 /* All reserved bits */ + +#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) + +#define SCI_RDxF_CLEAR ~(SCI_RESERVED | SCI_RDRF) +#define SCI_ERROR_CLEAR ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER) +#define SCI_TDxE_CLEAR ~(SCI_RESERVED | SCI_TEND | SCI_TDRE) +#define SCI_BREAK_CLEAR ~(SCI_RESERVED | SCI_PER | SCI_FER | SCI_ORER) + +/* SCxSR (Serial Status Register) on SCIF, SCIFA, SCIFB, HSCIF */ +#define SCIF_ER BIT(7) /* Receive Error */ +#define SCIF_TEND BIT(6) /* Transmission End */ +#define SCIF_TDFE BIT(5) /* Transmit FIFO Data Empty */ +#define SCIF_BRK BIT(4) /* Break Detect */ +#define SCIF_FER BIT(3) /* Framing Error */ +#define SCIF_PER BIT(2) /* Parity Error */ +#define SCIF_RDF BIT(1) /* Receive FIFO Data Full */ +#define SCIF_DR BIT(0) /* Receive Data Ready */ +/* SCIF only (optional) */ +#define SCIF_PERC 0xf000 /* Number of Parity Errors */ +#define SCIF_FERC 0x0f00 /* Number of Framing Errors */ +/*SCIFA/SCIFB and SCIF on SH7705/SH7720/SH7721 only */ +#define SCIFA_ORER BIT(9) /* Overrun Error */ + +#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_BRK | SCIF_ER) + +#define SCIF_RDxF_CLEAR ~(SCIF_DR | SCIF_RDF) +#define SCIF_ERROR_CLEAR ~(SCIFA_ORER | SCIF_PER | SCIF_FER | SCIF_ER) +#define SCIF_TDxE_CLEAR ~(SCIF_TDFE) +#define SCIF_BREAK_CLEAR ~(SCIF_PER | SCIF_FER | SCIF_BRK) + +/* SCFCR (FIFO Control Register) */ +#define SCFCR_MCE BIT(3) /* Modem Control Enable */ +#define SCFCR_TFRST BIT(2) /* Transmit FIFO Data Register Reset */ +#define SCFCR_RFRST BIT(1) /* Receive FIFO Data Register Reset */ +#define SCFCR_LOOP BIT(0) /* Loopback Test */ + +/* SCLSR (Line Status Register) on (H)SCIF */ +#define SCLSR_ORER BIT(0) /* Overrun Error */ + +/* SCSPTR (Serial Port Register), optional */ +#define SCSPTR_RTSIO BIT(7) /* Serial Port RTS Pin Input/Output */ +#define SCSPTR_RTSDT BIT(6) /* Serial Port RTS Pin Data */ +#define SCSPTR_CTSIO BIT(5) /* Serial Port CTS Pin Input/Output */ +#define SCSPTR_CTSDT BIT(4) /* Serial Port CTS Pin Data */ +#define SCSPTR_SPB2IO BIT(1) /* Serial Port Break Input/Output */ +#define SCSPTR_SPB2DT BIT(0) /* Serial Port Break Data */ + +/* HSSRR HSCIF */ +#define HSCIF_SRE BIT(15) /* Sampling Rate Register Enable */ + +/* SCPCR (Serial Port Control Register), SCIFA/SCIFB only */ +#define SCPCR_RTSC BIT(4) /* Serial Port RTS Pin / Output Pin */ +#define SCPCR_CTSC BIT(3) /* Serial Port CTS Pin / Input Pin */ + +/* SCPDR (Serial Port Data Register), SCIFA/SCIFB only */ +#define SCPDR_RTSD BIT(4) /* Serial Port RTS Output Pin Data */ +#define SCPDR_CTSD BIT(3) /* Serial Port CTS Input Pin Data */ + + #define SCxSR_TEND(port) (((port)->type == PORT_SCI) ? SCI_TEND : SCIF_TEND) #define SCxSR_RDxF(port) (((port)->type == PORT_SCI) ? SCI_RDRF : SCIF_RDF) #define SCxSR_TDxE(port) (((port)->type == PORT_SCI) ? SCI_TDRE : SCIF_TDFE) @@ -15,24 +123,24 @@ defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ defined(CONFIG_ARCH_SH73A0) || \ - defined(CONFIG_ARCH_SH7372) || \ defined(CONFIG_ARCH_R8A7740) -# define SCxSR_RDxF_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfffc) -# define SCxSR_ERROR_CLEAR(port) (serial_port_in(port, SCxSR) & 0xfd73) -# define SCxSR_TDxE_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffdf) -# define SCxSR_BREAK_CLEAR(port) (serial_port_in(port, SCxSR) & 0xffe3) +# define SCxSR_RDxF_CLEAR(port) \ + (serial_port_in(port, SCxSR) & SCIF_RDxF_CLEAR) +# define SCxSR_ERROR_CLEAR(port) \ + (serial_port_in(port, SCxSR) & SCIF_ERROR_CLEAR) +# define SCxSR_TDxE_CLEAR(port) \ + (serial_port_in(port, SCxSR) & SCIF_TDxE_CLEAR) +# define SCxSR_BREAK_CLEAR(port) \ + (serial_port_in(port, SCxSR) & SCIF_BREAK_CLEAR) #else -# define SCxSR_RDxF_CLEAR(port) (((port)->type == PORT_SCI) ? 0xbc : 0x00fc) -# define SCxSR_ERROR_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x0073) -# define SCxSR_TDxE_CLEAR(port) (((port)->type == PORT_SCI) ? 0x78 : 0x00df) -# define SCxSR_BREAK_CLEAR(port) (((port)->type == PORT_SCI) ? 0xc4 : 0x00e3) +# define SCxSR_RDxF_CLEAR(port) \ + ((((port)->type == PORT_SCI) ? SCI_RDxF_CLEAR : SCIF_RDxF_CLEAR) & 0xff) +# define SCxSR_ERROR_CLEAR(port) \ + ((((port)->type == PORT_SCI) ? SCI_ERROR_CLEAR : SCIF_ERROR_CLEAR) & 0xff) +# define SCxSR_TDxE_CLEAR(port) \ + ((((port)->type == PORT_SCI) ? SCI_TDxE_CLEAR : SCIF_TDxE_CLEAR) & 0xff) +# define SCxSR_BREAK_CLEAR(port) \ + ((((port)->type == PORT_SCI) ? SCI_BREAK_CLEAR : SCIF_BREAK_CLEAR) & 0xff) #endif -/* SCFCR */ -#define SCFCR_RFRST 0x0002 -#define SCFCR_TFRST 0x0004 -#define SCFCR_MCE 0x0008 - -#define SCI_MAJOR 204 -#define SCI_MINOR_START 8 diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c index 9de3eabe5737..653cdd5fb508 100644 --- a/drivers/tty/serial/sirfsoc_uart.c +++ b/drivers/tty/serial/sirfsoc_uart.c @@ -36,8 +36,6 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count); static struct uart_driver sirfsoc_uart_drv; static void sirfsoc_uart_tx_dma_complete_callback(void *param); -static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port); -static void sirfsoc_uart_rx_dma_complete_callback(void *param); static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = { {4000000, 2359296}, {3500000, 1310721}, @@ -59,50 +57,7 @@ static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = { {9600, 1114979}, }; -static struct sirfsoc_uart_port sirfsoc_uart_ports[SIRFSOC_UART_NR] = { - [0] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 0, - }, - }, - [1] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 1, - }, - }, - [2] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 2, - }, - }, - [3] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 3, - }, - }, - [4] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 4, - }, - }, - [5] = { - .port = { - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF, - .line = 5, - }, - }, -}; +static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR]; static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port) { @@ -116,8 +71,7 @@ static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port) struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status); - - return (reg & ufifo_st->ff_empty(port->line)) ? TIOCSER_TEMT : 0; + return (reg & ufifo_st->ff_empty(port)) ? TIOCSER_TEMT : 0; } static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port) @@ -152,6 +106,26 @@ static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0; unsigned int current_val; + if (mctrl & TIOCM_LOOP) { + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) + wr_regl(port, ureg->sirfsoc_line_ctrl, + rd_regl(port, ureg->sirfsoc_line_ctrl) | + SIRFUART_LOOP_BACK); + else + wr_regl(port, ureg->sirfsoc_mode1, + rd_regl(port, ureg->sirfsoc_mode1) | + SIRFSOC_USP_LOOP_BACK_CTRL); + } else { + if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) + wr_regl(port, ureg->sirfsoc_line_ctrl, + rd_regl(port, ureg->sirfsoc_line_ctrl) & + ~SIRFUART_LOOP_BACK); + else + wr_regl(port, ureg->sirfsoc_mode1, + rd_regl(port, ureg->sirfsoc_mode1) & + ~SIRFSOC_USP_LOOP_BACK_CTRL); + } + if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled) return; if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { @@ -182,16 +156,19 @@ static void sirfsoc_uart_stop_tx(struct uart_port *port) rd_regl(port, ureg->sirfsoc_int_en_reg) & ~uint_en->sirfsoc_txfifo_empty_en); else - wr_regl(port, SIRFUART_INT_EN_CLR, + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, uint_en->sirfsoc_txfifo_empty_en); } } else { + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port, + ureg->sirfsoc_tx_rx_en) & ~SIRFUART_TX_EN); if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & ~uint_en->sirfsoc_txfifo_empty_en); else - wr_regl(port, SIRFUART_INT_EN_CLR, + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, uint_en->sirfsoc_txfifo_empty_en); } } @@ -222,7 +199,7 @@ static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport) rd_regl(port, ureg->sirfsoc_int_en_reg)& ~(uint_en->sirfsoc_txfifo_empty_en)); else - wr_regl(port, SIRFUART_INT_EN_CLR, + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, uint_en->sirfsoc_txfifo_empty_en); /* * DMA requires buffer address and buffer length are both aligned with @@ -290,8 +267,11 @@ static void sirfsoc_uart_start_tx(struct uart_port *port) if (sirfport->tx_dma_chan) sirfsoc_uart_tx_with_dma(sirfport); else { - sirfsoc_uart_pio_tx_chars(sirfport, - SIRFSOC_UART_IO_TX_REASONABLE_CNT); + if (sirfport->uart_reg->uart_type == SIRF_USP_UART) + wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port, + ureg->sirfsoc_tx_rx_en) | SIRFUART_TX_EN); + wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP); + sirfsoc_uart_pio_tx_chars(sirfport, port->fifosize); wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START); if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, @@ -314,21 +294,25 @@ static void sirfsoc_uart_stop_rx(struct uart_port *port) if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) & - ~(SIRFUART_RX_DMA_INT_EN(port, uint_en) | + ~(SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type) | uint_en->sirfsoc_rx_done_en)); else - wr_regl(port, SIRFUART_INT_EN_CLR, - SIRFUART_RX_DMA_INT_EN(port, uint_en)| - uint_en->sirfsoc_rx_done_en); + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type)| + uint_en->sirfsoc_rx_done_en); dmaengine_terminate_all(sirfport->rx_dma_chan); } else { if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg)& - ~(SIRFUART_RX_IO_INT_EN(port, uint_en))); + ~(SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type))); else - wr_regl(port, SIRFUART_INT_EN_CLR, - SIRFUART_RX_IO_INT_EN(port, uint_en)); + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); } } @@ -349,7 +333,7 @@ static void sirfsoc_uart_disable_ms(struct uart_port *port) rd_regl(port, ureg->sirfsoc_int_en_reg)& ~uint_en->sirfsoc_cts_en); else - wr_regl(port, SIRFUART_INT_EN_CLR, + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, uint_en->sirfsoc_cts_en); } else disable_irq(gpio_to_irq(sirfport->cts_gpio)); @@ -379,7 +363,8 @@ static void sirfsoc_uart_enable_ms(struct uart_port *port) if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { wr_regl(port, ureg->sirfsoc_afc_ctrl, rd_regl(port, ureg->sirfsoc_afc_ctrl) | - SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN); + SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN | + SIRFUART_AFC_CTRL_RX_THD); if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) @@ -417,7 +402,7 @@ sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count) if (!tty) return -ENODEV; while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) & - ufifo_st->ff_empty(port->line))) { + ufifo_st->ff_empty(port))) { ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) | SIRFUART_DUMMY_READ; if (unlikely(uart_handle_sysrq_char(port, ch))) @@ -444,7 +429,7 @@ sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count) unsigned int num_tx = 0; while (!uart_circ_empty(xmit) && !(rd_regl(port, ureg->sirfsoc_tx_fifo_status) & - ufifo_st->ff_full(port->line)) && + ufifo_st->ff_full(port)) && count--) { wr_regl(port, ureg->sirfsoc_tx_fifo_data, xmit->buf[xmit->tail]); @@ -478,139 +463,6 @@ static void sirfsoc_uart_tx_dma_complete_callback(void *param) spin_unlock_irqrestore(&port->lock, flags); } -static void sirfsoc_uart_insert_rx_buf_to_tty( - struct sirfsoc_uart_port *sirfport, int count) -{ - struct uart_port *port = &sirfport->port; - struct tty_port *tport = &port->state->port; - int inserted; - - inserted = tty_insert_flip_string(tport, - sirfport->rx_dma_items[sirfport->rx_completed].xmit.buf, count); - port->icount.rx += inserted; -} - -static void sirfsoc_rx_submit_one_dma_desc(struct uart_port *port, int index) -{ - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - - sirfport->rx_dma_items[index].xmit.tail = - sirfport->rx_dma_items[index].xmit.head = 0; - sirfport->rx_dma_items[index].desc = - dmaengine_prep_slave_single(sirfport->rx_dma_chan, - sirfport->rx_dma_items[index].dma_addr, SIRFSOC_RX_DMA_BUF_SIZE, - DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); - if (!sirfport->rx_dma_items[index].desc) { - dev_err(port->dev, "DMA slave single fail\n"); - return; - } - sirfport->rx_dma_items[index].desc->callback = - sirfsoc_uart_rx_dma_complete_callback; - sirfport->rx_dma_items[index].desc->callback_param = sirfport; - sirfport->rx_dma_items[index].cookie = - dmaengine_submit(sirfport->rx_dma_items[index].desc); - dma_async_issue_pending(sirfport->rx_dma_chan); -} - -static void sirfsoc_rx_tmo_process_tl(unsigned long param) -{ - struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; - struct uart_port *port = &sirfport->port; - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; - unsigned int count; - unsigned long flags; - struct dma_tx_state tx_state; - - spin_lock_irqsave(&port->lock, flags); - while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, - sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { - sirfsoc_uart_insert_rx_buf_to_tty(sirfport, - SIRFSOC_RX_DMA_BUF_SIZE); - sirfport->rx_completed++; - sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT; - } - count = CIRC_CNT(sirfport->rx_dma_items[sirfport->rx_issued].xmit.head, - sirfport->rx_dma_items[sirfport->rx_issued].xmit.tail, - SIRFSOC_RX_DMA_BUF_SIZE); - if (count > 0) - sirfsoc_uart_insert_rx_buf_to_tty(sirfport, count); - wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, - rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | - SIRFUART_IO_MODE); - sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); - if (sirfport->rx_io_count == 4) { - sirfport->rx_io_count = 0; - wr_regl(port, ureg->sirfsoc_int_st_reg, - uint_st->sirfsoc_rx_done); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) & - ~(uint_en->sirfsoc_rx_done_en)); - else - wr_regl(port, SIRFUART_INT_EN_CLR, - uint_en->sirfsoc_rx_done_en); - sirfsoc_uart_start_next_rx_dma(port); - } else { - wr_regl(port, ureg->sirfsoc_int_st_reg, - uint_st->sirfsoc_rx_done); - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) | - (uint_en->sirfsoc_rx_done_en)); - else - wr_regl(port, ureg->sirfsoc_int_en_reg, - uint_en->sirfsoc_rx_done_en); - } - spin_unlock_irqrestore(&port->lock, flags); - tty_flip_buffer_push(&port->state->port); -} - -static void sirfsoc_uart_handle_rx_tmo(struct sirfsoc_uart_port *sirfport) -{ - struct uart_port *port = &sirfport->port; - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - struct dma_tx_state tx_state; - dmaengine_tx_status(sirfport->rx_dma_chan, - sirfport->rx_dma_items[sirfport->rx_issued].cookie, &tx_state); - dmaengine_terminate_all(sirfport->rx_dma_chan); - sirfport->rx_dma_items[sirfport->rx_issued].xmit.head = - SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue; - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) & - ~(uint_en->sirfsoc_rx_timeout_en)); - else - wr_regl(port, SIRFUART_INT_EN_CLR, - uint_en->sirfsoc_rx_timeout_en); - tasklet_schedule(&sirfport->rx_tmo_process_tasklet); -} - -static void sirfsoc_uart_handle_rx_done(struct sirfsoc_uart_port *sirfport) -{ - struct uart_port *port = &sirfport->port; - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st; - - sirfsoc_uart_pio_rx_chars(port, 4 - sirfport->rx_io_count); - if (sirfport->rx_io_count == 4) { - sirfport->rx_io_count = 0; - if (!sirfport->is_atlas7) - wr_regl(port, ureg->sirfsoc_int_en_reg, - rd_regl(port, ureg->sirfsoc_int_en_reg) & - ~(uint_en->sirfsoc_rx_done_en)); - else - wr_regl(port, SIRFUART_INT_EN_CLR, - uint_en->sirfsoc_rx_done_en); - wr_regl(port, ureg->sirfsoc_int_st_reg, - uint_st->sirfsoc_rx_timeout); - sirfsoc_uart_start_next_rx_dma(port); - } -} - static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) { unsigned long intr_status; @@ -628,20 +480,25 @@ static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id) intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg); wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status); intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg); - if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(port, uint_st)))) { + if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(uint_st, + sirfport->uart_reg->uart_type)))) { if (intr_status & uint_st->sirfsoc_rxd_brk) { port->icount.brk++; if (uart_handle_break(port)) goto recv_char; } - if (intr_status & uint_st->sirfsoc_rx_oflow) + if (intr_status & uint_st->sirfsoc_rx_oflow) { port->icount.overrun++; + flag = TTY_OVERRUN; + } if (intr_status & uint_st->sirfsoc_frm_err) { port->icount.frame++; flag = TTY_FRAME; } - if (intr_status & uint_st->sirfsoc_parity_err) + if (intr_status & uint_st->sirfsoc_parity_err) { + port->icount.parity++; flag = TTY_PARITY; + } wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); @@ -662,15 +519,51 @@ recv_char: uart_handle_cts_change(port, cts_status); wake_up_interruptible(&state->port.delta_msr_wait); } - if (sirfport->rx_dma_chan) { - if (intr_status & uint_st->sirfsoc_rx_timeout) - sirfsoc_uart_handle_rx_tmo(sirfport); - if (intr_status & uint_st->sirfsoc_rx_done) - sirfsoc_uart_handle_rx_done(sirfport); - } else { - if (intr_status & SIRFUART_RX_IO_INT_ST(uint_st)) - sirfsoc_uart_pio_rx_chars(port, - SIRFSOC_UART_IO_RX_MAX_CNT); + if (!sirfport->rx_dma_chan && + (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))) { + /* + * chip will trigger continuous RX_TIMEOUT interrupt + * in RXFIFO empty and not trigger if RXFIFO recevice + * data in limit time, original method use RX_TIMEOUT + * will trigger lots of useless interrupt in RXFIFO + * empty.RXFIFO received one byte will trigger RX_DONE + * interrupt.use RX_DONE to wait for data received + * into RXFIFO, use RX_THD/RX_FULL for lots data receive + * and use RX_TIMEOUT for the last left data. + */ + if (intr_status & uint_st->sirfsoc_rx_done) { + if (!sirfport->is_atlas7) { + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + & ~(uint_en->sirfsoc_rx_done_en)); + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + | (uint_en->sirfsoc_rx_timeout_en)); + } else { + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_rx_done_en); + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_rx_timeout_en); + } + } else { + if (intr_status & uint_st->sirfsoc_rx_timeout) { + if (!sirfport->is_atlas7) { + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + & ~(uint_en->sirfsoc_rx_timeout_en)); + wr_regl(port, ureg->sirfsoc_int_en_reg, + rd_regl(port, ureg->sirfsoc_int_en_reg) + | (uint_en->sirfsoc_rx_done_en)); + } else { + wr_regl(port, + ureg->sirfsoc_int_en_clr_reg, + uint_en->sirfsoc_rx_timeout_en); + wr_regl(port, ureg->sirfsoc_int_en_reg, + uint_en->sirfsoc_rx_done_en); + } + } + sirfsoc_uart_pio_rx_chars(port, port->fifosize); + } } spin_unlock(&port->lock); tty_flip_buffer_push(&state->port); @@ -684,10 +577,10 @@ recv_char: return IRQ_HANDLED; } else { sirfsoc_uart_pio_tx_chars(sirfport, - SIRFSOC_UART_IO_TX_REASONABLE_CNT); + port->fifosize); if ((uart_circ_empty(xmit)) && (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & - ufifo_st->ff_empty(port->line))) + ufifo_st->ff_empty(port))) sirfsoc_uart_stop_tx(port); } } @@ -697,41 +590,8 @@ recv_char: return IRQ_HANDLED; } -static void sirfsoc_uart_rx_dma_complete_tl(unsigned long param) -{ - struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; - struct uart_port *port = &sirfport->port; - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; - struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - unsigned long flags; - struct dma_tx_state tx_state; - spin_lock_irqsave(&port->lock, flags); - while (DMA_COMPLETE == dmaengine_tx_status(sirfport->rx_dma_chan, - sirfport->rx_dma_items[sirfport->rx_completed].cookie, &tx_state)) { - sirfsoc_uart_insert_rx_buf_to_tty(sirfport, - SIRFSOC_RX_DMA_BUF_SIZE); - if (rd_regl(port, ureg->sirfsoc_int_en_reg) & - uint_en->sirfsoc_rx_timeout_en) - sirfsoc_rx_submit_one_dma_desc(port, - sirfport->rx_completed++); - else - sirfport->rx_completed++; - sirfport->rx_completed %= SIRFSOC_RX_LOOP_BUF_CNT; - } - spin_unlock_irqrestore(&port->lock, flags); - tty_flip_buffer_push(&port->state->port); -} - static void sirfsoc_uart_rx_dma_complete_callback(void *param) { - struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param; - unsigned long flags; - - spin_lock_irqsave(&sirfport->port.lock, flags); - sirfport->rx_issued++; - sirfport->rx_issued %= SIRFSOC_RX_LOOP_BUF_CNT; - tasklet_schedule(&sirfport->rx_dma_complete_tasklet); - spin_unlock_irqrestore(&sirfport->port.lock, flags); } /* submit rx dma task into dmaengine */ @@ -740,21 +600,36 @@ static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en; - int i; sirfport->rx_io_count = 0; wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & ~SIRFUART_IO_MODE); - for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) - sirfsoc_rx_submit_one_dma_desc(port, i); - sirfport->rx_completed = sirfport->rx_issued = 0; + sirfport->rx_dma_items.xmit.tail = + sirfport->rx_dma_items.xmit.head = 0; + sirfport->rx_dma_items.desc = + dmaengine_prep_dma_cyclic(sirfport->rx_dma_chan, + sirfport->rx_dma_items.dma_addr, SIRFSOC_RX_DMA_BUF_SIZE, + SIRFSOC_RX_DMA_BUF_SIZE / 2, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); + if (IS_ERR_OR_NULL(sirfport->rx_dma_items.desc)) { + dev_err(port->dev, "DMA slave single fail\n"); + return; + } + sirfport->rx_dma_items.desc->callback = + sirfsoc_uart_rx_dma_complete_callback; + sirfport->rx_dma_items.desc->callback_param = sirfport; + sirfport->rx_dma_items.cookie = + dmaengine_submit(sirfport->rx_dma_items.desc); + dma_async_issue_pending(sirfport->rx_dma_chan); if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) | - SIRFUART_RX_DMA_INT_EN(port, uint_en)); + SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); else wr_regl(port, ureg->sirfsoc_int_en_reg, - SIRFUART_RX_DMA_INT_EN(port, uint_en)); + SIRFUART_RX_DMA_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); } static void sirfsoc_uart_start_rx(struct uart_port *port) @@ -773,10 +648,12 @@ static void sirfsoc_uart_start_rx(struct uart_port *port) if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, rd_regl(port, ureg->sirfsoc_int_en_reg) | - SIRFUART_RX_IO_INT_EN(port, uint_en)); + SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); else wr_regl(port, ureg->sirfsoc_int_en_reg, - SIRFUART_RX_IO_INT_EN(port, uint_en)); + SIRFUART_RX_IO_INT_EN(uint_en, + sirfport->uart_reg->uart_type)); } } @@ -789,7 +666,7 @@ sirfsoc_usp_calc_sample_div(unsigned long set_rate, unsigned long ioclk_div = 0; unsigned long temp_delta; - for (sample_div = SIRF_MIN_SAMPLE_DIV; + for (sample_div = SIRF_USP_MIN_SAMPLE_DIV; sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) { temp_delta = ioclk_rate - (ioclk_rate + (set_rate * sample_div) / 2) @@ -910,10 +787,11 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, config_reg |= SIRFUART_STICK_BIT_MARK; else config_reg |= SIRFUART_STICK_BIT_SPACE; - } else if (termios->c_cflag & PARODD) { - config_reg |= SIRFUART_STICK_BIT_ODD; } else { - config_reg |= SIRFUART_STICK_BIT_EVEN; + if (termios->c_cflag & PARODD) + config_reg |= SIRFUART_STICK_BIT_ODD; + else + config_reg |= SIRFUART_STICK_BIT_EVEN; } } } else { @@ -976,7 +854,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, wr_regl(port, ureg->sirfsoc_tx_fifo_op, (txfifo_op_reg & ~SIRFUART_FIFO_START)); if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) { - config_reg |= SIRFUART_RECV_TIMEOUT(port, rx_time_out); + config_reg |= SIRFUART_UART_RECV_TIMEOUT(rx_time_out); wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg); } else { /*tx frame ctrl*/ @@ -999,7 +877,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val); /*async param*/ wr_regl(port, ureg->sirfsoc_async_param_reg, - (SIRFUART_RECV_TIMEOUT(port, rx_time_out)) | + (SIRFUART_USP_RECV_TIMEOUT(rx_time_out)) | (sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) << SIRFSOC_USP_ASYNC_DIV2_OFFSET); } @@ -1011,6 +889,7 @@ static void sirfsoc_uart_set_termios(struct uart_port *port, wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE); else wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE); + sirfport->rx_period_time = 20000000; /* Reset Rx/Tx FIFO Threshold level for proper baudrate */ if (set_baud < 1000000) threshold_div = 1; @@ -1032,19 +911,10 @@ static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state, unsigned int oldstate) { struct sirfsoc_uart_port *sirfport = to_sirfport(port); - if (!state) { - if (sirfport->is_bt_uart) { - clk_prepare_enable(sirfport->clk_noc); - clk_prepare_enable(sirfport->clk_general); - } + if (!state) clk_prepare_enable(sirfport->clk); - } else { + else clk_disable_unprepare(sirfport->clk); - if (sirfport->is_bt_uart) { - clk_disable_unprepare(sirfport->clk_general); - clk_disable_unprepare(sirfport->clk_noc); - } - } } static int sirfsoc_uart_startup(struct uart_port *port) @@ -1053,7 +923,7 @@ static int sirfsoc_uart_startup(struct uart_port *port) struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; unsigned int index = port->line; int ret; - set_irq_flags(port->irq, IRQF_VALID | IRQF_NOAUTOEN); + irq_modify_status(port->irq, IRQ_NOREQUEST, IRQ_NOAUTOEN); ret = request_irq(port->irq, sirfsoc_uart_isr, 0, @@ -1064,7 +934,6 @@ static int sirfsoc_uart_startup(struct uart_port *port) index, port->irq); goto irq_err; } - /* initial hardware settings */ wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) | @@ -1072,6 +941,9 @@ static int sirfsoc_uart_startup(struct uart_port *port) wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | SIRFUART_IO_MODE); + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & + ~SIRFUART_RX_DMA_FLUSH); wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0); wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0); wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN); @@ -1080,7 +952,6 @@ static int sirfsoc_uart_startup(struct uart_port *port) SIRFSOC_USP_ENDIAN_CTRL_LSBF | SIRFSOC_USP_EN); wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET); - wr_regl(port, ureg->sirfsoc_tx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port)); @@ -1100,8 +971,8 @@ static int sirfsoc_uart_startup(struct uart_port *port) sirfport->ms_enabled = false; if (sirfport->uart_reg->uart_type == SIRF_USP_UART && sirfport->hw_flow_ctrl) { - set_irq_flags(gpio_to_irq(sirfport->cts_gpio), - IRQF_VALID | IRQF_NOAUTOEN); + irq_modify_status(gpio_to_irq(sirfport->cts_gpio), + IRQ_NOREQUEST, IRQ_NOAUTOEN); ret = request_irq(gpio_to_irq(sirfport->cts_gpio), sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport); @@ -1110,8 +981,16 @@ static int sirfsoc_uart_startup(struct uart_port *port) goto init_rx_err; } } - enable_irq(port->irq); + if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) { + sirfport->is_hrt_enabled = true; + sirfport->rx_period_time = 20000000; + sirfport->rx_dma_items.xmit.tail = + sirfport->rx_dma_items.xmit.head = 0; + hrtimer_start(&sirfport->hrt, + ns_to_ktime(sirfport->rx_period_time), + HRTIMER_MODE_REL); + } return 0; init_rx_err: @@ -1127,7 +1006,7 @@ static void sirfsoc_uart_shutdown(struct uart_port *port) if (!sirfport->is_atlas7) wr_regl(port, ureg->sirfsoc_int_en_reg, 0); else - wr_regl(port, SIRFUART_INT_EN_CLR, ~0UL); + wr_regl(port, ureg->sirfsoc_int_en_clr_reg, ~0UL); free_irq(port->irq, sirfport); if (sirfport->ms_enabled) @@ -1139,6 +1018,13 @@ static void sirfsoc_uart_shutdown(struct uart_port *port) } if (sirfport->tx_dma_chan) sirfport->tx_dma_state = TX_DMA_IDLE; + if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) { + while ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + SIRFUART_RX_FIFO_MASK) > 0) + ; + sirfport->is_hrt_enabled = false; + hrtimer_cancel(&sirfport->hrt); + } } static const char *sirfsoc_uart_type(struct uart_port *port) @@ -1196,27 +1082,29 @@ sirfsoc_uart_console_setup(struct console *co, char *options) unsigned int bits = 8; unsigned int parity = 'n'; unsigned int flow = 'n'; - struct uart_port *port = &sirfsoc_uart_ports[co->index].port; - struct sirfsoc_uart_port *sirfport = to_sirfport(port); - struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; + struct sirfsoc_uart_port *sirfport; + struct sirfsoc_register *ureg; if (co->index < 0 || co->index >= SIRFSOC_UART_NR) - return -EINVAL; - - if (!port->mapbase) + co->index = 1; + sirfport = sirf_ports[co->index]; + if (!sirfport) + return -ENODEV; + ureg = &sirfport->uart_reg->uart_reg; + if (!sirfport->port.mapbase) return -ENODEV; /* enable usp in mode1 register */ if (sirfport->uart_reg->uart_type == SIRF_USP_UART) - wr_regl(port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN | + wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN | SIRFSOC_USP_ENDIAN_CTRL_LSBF); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); - port->cons = co; + sirfport->port.cons = co; /* default console tx/rx transfer using io mode */ sirfport->rx_dma_chan = NULL; sirfport->tx_dma_chan = NULL; - return uart_set_options(port, co, baud, parity, bits, flow); + return uart_set_options(&sirfport->port, co, baud, parity, bits, flow); } static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) @@ -1224,8 +1112,8 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) struct sirfsoc_uart_port *sirfport = to_sirfport(port); struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg; struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status; - while (rd_regl(port, - ureg->sirfsoc_tx_fifo_status) & ufifo_st->ff_full(port->line)) + while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) & + ufifo_st->ff_full(port)) cpu_relax(); wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch); } @@ -1233,8 +1121,10 @@ static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch) static void sirfsoc_uart_console_write(struct console *co, const char *s, unsigned int count) { - struct uart_port *port = &sirfsoc_uart_ports[co->index].port; - uart_console_write(port, s, count, sirfsoc_uart_console_putchar); + struct sirfsoc_uart_port *sirfport = sirf_ports[co->index]; + + uart_console_write(&sirfport->port, s, count, + sirfsoc_uart_console_putchar); } static struct console sirfsoc_uart_console = { @@ -1269,10 +1159,75 @@ static struct uart_driver sirfsoc_uart_drv = { #endif }; -static const struct of_device_id sirfsoc_uart_ids[] = { +static enum hrtimer_restart + sirfsoc_uart_rx_dma_hrtimer_callback(struct hrtimer *hrt) +{ + struct sirfsoc_uart_port *sirfport; + struct uart_port *port; + int count, inserted; + struct dma_tx_state tx_state; + struct tty_struct *tty; + struct sirfsoc_register *ureg; + struct circ_buf *xmit; + + sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt); + port = &sirfport->port; + inserted = 0; + tty = port->state->port.tty; + ureg = &sirfport->uart_reg->uart_reg; + xmit = &sirfport->rx_dma_items.xmit; + dmaengine_tx_status(sirfport->rx_dma_chan, + sirfport->rx_dma_items.cookie, &tx_state); + xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue; + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, + SIRFSOC_RX_DMA_BUF_SIZE); + while (count > 0) { + inserted = tty_insert_flip_string(tty->port, + (const unsigned char *)&xmit->buf[xmit->tail], count); + if (!inserted) + goto next_hrt; + port->icount.rx += inserted; + xmit->tail = (xmit->tail + inserted) & + (SIRFSOC_RX_DMA_BUF_SIZE - 1); + count = CIRC_CNT_TO_END(xmit->head, xmit->tail, + SIRFSOC_RX_DMA_BUF_SIZE); + tty_flip_buffer_push(tty->port); + } + /* + * if RX DMA buffer data have all push into tty buffer, and there is + * only little data(less than a dma transfer unit) left in rxfifo, + * fetch it out in pio mode and switch back to dma immediately + */ + if (!inserted && !count && + ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + SIRFUART_RX_FIFO_MASK) > 0)) { + /* switch to pio mode */ + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) | + SIRFUART_IO_MODE); + while ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) & + SIRFUART_RX_FIFO_MASK) > 0) { + if (sirfsoc_uart_pio_rx_chars(port, 16) > 0) + tty_flip_buffer_push(tty->port); + } + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0); + wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START); + /* switch back to dma mode */ + wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, + rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) & + ~SIRFUART_IO_MODE); + } +next_hrt: + hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time)); + return HRTIMER_RESTART; +} + +static struct of_device_id sirfsoc_uart_ids[] = { { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,}, { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart}, { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp}, + { .compatible = "sirf,atlas7-usp-uart", .data = &sirfsoc_usp}, {} }; MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids); @@ -1283,7 +1238,6 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) struct uart_port *port; struct resource *res; int ret; - int i, j; struct dma_slave_config slv_cfg = { .src_maxburst = 2, }; @@ -1293,16 +1247,15 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) const struct of_device_id *match; match = of_match_node(sirfsoc_uart_ids, pdev->dev.of_node); - if (of_property_read_u32(pdev->dev.of_node, "cell-index", &pdev->id)) { - dev_err(&pdev->dev, - "Unable to find cell-index in uart node.\n"); - ret = -EFAULT; + sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL); + if (!sirfport) { + ret = -ENOMEM; goto err; } - if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) - pdev->id += ((struct sirfsoc_uart_register *) - match->data)->uart_param.register_uart_nr; - sirfport = &sirfsoc_uart_ports[pdev->id]; + sirfport->port.line = of_alias_get_id(pdev->dev.of_node, "serial"); + sirf_ports[sirfport->port.line] = sirfport; + sirfport->port.iotype = UPIO_MEM; + sirfport->port.flags = UPF_BOOT_AUTOCONF; port = &sirfport->port; port->dev = &pdev->dev; port->private_data = sirfport; @@ -1310,9 +1263,12 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) sirfport->hw_flow_ctrl = of_property_read_bool(pdev->dev.of_node, "sirf,uart-has-rtscts"); - if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart")) + if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-uart") || + of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart")) sirfport->uart_reg->uart_type = SIRF_REAL_UART; - if (of_device_is_compatible(pdev->dev.of_node, "sirf,prima2-usp-uart")) { + if (of_device_is_compatible(pdev->dev.of_node, + "sirf,prima2-usp-uart") || of_device_is_compatible( + pdev->dev.of_node, "sirf,atlas7-usp-uart")) { sirfport->uart_reg->uart_type = SIRF_USP_UART; if (!sirfport->hw_flow_ctrl) goto usp_no_flow_control; @@ -1350,7 +1306,8 @@ static int sirfsoc_uart_probe(struct platform_device *pdev) gpio_direction_output(sirfport->rts_gpio, 1); } usp_no_flow_control: - if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart")) + if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-uart") || + of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-usp-uart")) sirfport->is_atlas7 = true; if (of_property_read_u32(pdev->dev.of_node, @@ -1368,12 +1325,9 @@ usp_no_flow_control: ret = -EFAULT; goto err; } - tasklet_init(&sirfport->rx_dma_complete_tasklet, - sirfsoc_uart_rx_dma_complete_tl, (unsigned long)sirfport); - tasklet_init(&sirfport->rx_tmo_process_tasklet, - sirfsoc_rx_tmo_process_tl, (unsigned long)sirfport); port->mapbase = res->start; - port->membase = devm_ioremap(&pdev->dev, res->start, resource_size(res)); + port->membase = devm_ioremap(&pdev->dev, + res->start, resource_size(res)); if (!port->membase) { dev_err(&pdev->dev, "Cannot remap resource.\n"); ret = -ENOMEM; @@ -1393,20 +1347,6 @@ usp_no_flow_control: goto err; } port->uartclk = clk_get_rate(sirfport->clk); - if (of_device_is_compatible(pdev->dev.of_node, "sirf,atlas7-bt-uart")) { - sirfport->clk_general = devm_clk_get(&pdev->dev, "general"); - if (IS_ERR(sirfport->clk_general)) { - ret = PTR_ERR(sirfport->clk_general); - goto err; - } - sirfport->clk_noc = devm_clk_get(&pdev->dev, "noc"); - if (IS_ERR(sirfport->clk_noc)) { - ret = PTR_ERR(sirfport->clk_noc); - goto err; - } - sirfport->is_bt_uart = true; - } else - sirfport->is_bt_uart = false; port->ops = &sirfsoc_uart_ops; spin_lock_init(&port->lock); @@ -1419,30 +1359,32 @@ usp_no_flow_control: } sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx"); - for (i = 0; sirfport->rx_dma_chan && i < SIRFSOC_RX_LOOP_BUF_CNT; i++) { - sirfport->rx_dma_items[i].xmit.buf = - dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - &sirfport->rx_dma_items[i].dma_addr, GFP_KERNEL); - if (!sirfport->rx_dma_items[i].xmit.buf) { - dev_err(port->dev, "Uart alloc bufa failed\n"); - ret = -ENOMEM; - goto alloc_coherent_err; - } - sirfport->rx_dma_items[i].xmit.head = - sirfport->rx_dma_items[i].xmit.tail = 0; + sirfport->rx_dma_items.xmit.buf = + dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + &sirfport->rx_dma_items.dma_addr, GFP_KERNEL); + if (!sirfport->rx_dma_items.xmit.buf) { + dev_err(port->dev, "Uart alloc bufa failed\n"); + ret = -ENOMEM; + goto alloc_coherent_err; } + sirfport->rx_dma_items.xmit.head = + sirfport->rx_dma_items.xmit.tail = 0; if (sirfport->rx_dma_chan) dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg); sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx"); if (sirfport->tx_dma_chan) dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg); + if (sirfport->rx_dma_chan) { + hrtimer_init(&sirfport->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL); + sirfport->hrt.function = sirfsoc_uart_rx_dma_hrtimer_callback; + sirfport->is_hrt_enabled = false; + } return 0; alloc_coherent_err: - for (j = 0; j < i; j++) - dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - sirfport->rx_dma_items[j].xmit.buf, - sirfport->rx_dma_items[j].dma_addr); + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items.xmit.buf, + sirfport->rx_dma_items.dma_addr); dma_release_channel(sirfport->rx_dma_chan); err: return ret; @@ -1454,13 +1396,11 @@ static int sirfsoc_uart_remove(struct platform_device *pdev) struct uart_port *port = &sirfport->port; uart_remove_one_port(&sirfsoc_uart_drv, port); if (sirfport->rx_dma_chan) { - int i; dmaengine_terminate_all(sirfport->rx_dma_chan); dma_release_channel(sirfport->rx_dma_chan); - for (i = 0; i < SIRFSOC_RX_LOOP_BUF_CNT; i++) - dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, - sirfport->rx_dma_items[i].xmit.buf, - sirfport->rx_dma_items[i].dma_addr); + dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE, + sirfport->rx_dma_items.xmit.buf, + sirfport->rx_dma_items.dma_addr); } if (sirfport->tx_dma_chan) { dmaengine_terminate_all(sirfport->tx_dma_chan); diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h index 727eb6b88fff..eb162b012eec 100644 --- a/drivers/tty/serial/sirfsoc_uart.h +++ b/drivers/tty/serial/sirfsoc_uart.h @@ -6,11 +6,11 @@ * Licensed under GPLv2 or later. */ #include <linux/bitops.h> +#include <linux/log2.h> +#include <linux/hrtimer.h> struct sirfsoc_uart_param { const char *uart_name; const char *port_name; - u32 uart_nr; - u32 register_uart_nr; }; struct sirfsoc_register { @@ -21,6 +21,7 @@ struct sirfsoc_register { u32 sirfsoc_tx_rx_en; u32 sirfsoc_int_en_reg; u32 sirfsoc_int_st_reg; + u32 sirfsoc_int_en_clr_reg; u32 sirfsoc_tx_dma_io_ctrl; u32 sirfsoc_tx_dma_io_len; u32 sirfsoc_tx_fifo_ctrl; @@ -45,8 +46,8 @@ struct sirfsoc_register { u32 sirfsoc_async_param_reg; }; -typedef u32 (*fifo_full_mask)(int line); -typedef u32 (*fifo_empty_mask)(int line); +typedef u32 (*fifo_full_mask)(struct uart_port *port); +typedef u32 (*fifo_empty_mask)(struct uart_port *port); struct sirfsoc_fifo_status { fifo_full_mask ff_full; @@ -105,21 +106,20 @@ struct sirfsoc_uart_register { enum sirfsoc_uart_type uart_type; }; -u32 usp_ff_full(int line) +u32 uart_usp_ff_full_mask(struct uart_port *port) { - return 0x80; -} -u32 usp_ff_empty(int line) -{ - return 0x100; -} -u32 uart_ff_full(int line) -{ - return (line == 1) ? (0x20) : (0x80); + u32 full_bit; + + full_bit = ilog2(port->fifosize); + return (1 << full_bit); } -u32 uart_ff_empty(int line) + +u32 uart_usp_ff_empty_mask(struct uart_port *port) { - return (line == 1) ? (0x40) : (0x100); + u32 empty_bit; + + empty_bit = ilog2(port->fifosize) + 1; + return (1 << empty_bit); } struct sirfsoc_uart_register sirfsoc_usp = { .uart_reg = { @@ -145,6 +145,7 @@ struct sirfsoc_uart_register sirfsoc_usp = { .sirfsoc_rx_fifo_op = 0x0130, .sirfsoc_rx_fifo_status = 0x0134, .sirfsoc_rx_fifo_data = 0x0138, + .sirfsoc_int_en_clr_reg = 0x140, }, .uart_int_en = { .sirfsoc_rx_done_en = BIT(0), @@ -177,14 +178,12 @@ struct sirfsoc_uart_register sirfsoc_usp = { .sirfsoc_rxd_brk = BIT(15), }, .fifo_status = { - .ff_full = usp_ff_full, - .ff_empty = usp_ff_empty, + .ff_full = uart_usp_ff_full_mask, + .ff_empty = uart_usp_ff_empty_mask, }, .uart_param = { .uart_name = "ttySiRF", .port_name = "sirfsoc-uart", - .uart_nr = 2, - .register_uart_nr = 3, }, }; @@ -195,6 +194,7 @@ struct sirfsoc_uart_register sirfsoc_uart = { .sirfsoc_divisor = 0x0050, .sirfsoc_int_en_reg = 0x0054, .sirfsoc_int_st_reg = 0x0058, + .sirfsoc_int_en_clr_reg = 0x0060, .sirfsoc_tx_dma_io_ctrl = 0x0100, .sirfsoc_tx_dma_io_len = 0x0104, .sirfsoc_tx_fifo_ctrl = 0x0108, @@ -249,14 +249,12 @@ struct sirfsoc_uart_register sirfsoc_uart = { .sirfsoc_rts = BIT(15), }, .fifo_status = { - .ff_full = uart_ff_full, - .ff_empty = uart_ff_empty, + .ff_full = uart_usp_ff_full_mask, + .ff_empty = uart_usp_ff_empty_mask, }, .uart_param = { .uart_name = "ttySiRF", .port_name = "sirfsoc_uart", - .uart_nr = 3, - .register_uart_nr = 0, }, }; /* uart io ctrl */ @@ -296,10 +294,10 @@ struct sirfsoc_uart_register sirfsoc_uart = { #define SIRFUART_IO_MODE BIT(0) #define SIRFUART_DMA_MODE 0x0 +#define SIRFUART_RX_DMA_FLUSH 0x4 -/* Macro Specific*/ -#define SIRFUART_INT_EN_CLR 0x0060 /* Baud Rate Calculation */ +#define SIRF_USP_MIN_SAMPLE_DIV 0x1 #define SIRF_MIN_SAMPLE_DIV 0xf #define SIRF_MAX_SAMPLE_DIV 0x3f #define SIRF_IOCLK_DIV_MAX 0xffff @@ -326,55 +324,54 @@ struct sirfsoc_uart_register sirfsoc_uart = { #define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24 #define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f #define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16 - +#define SIRFSOC_USP_LOOP_BACK_CTRL BIT(2) /* USP-UART Common */ #define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000) #define SIRFUART_RECV_TIMEOUT_VALUE(x) \ (((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF)) -#define SIRFUART_RECV_TIMEOUT(port, x) \ - (((port)->line > 2) ? (x & 0xFFFF) : ((x) & 0xFFFF) << 16) +#define SIRFUART_USP_RECV_TIMEOUT(x) (x & 0xFFFF) +#define SIRFUART_UART_RECV_TIMEOUT(x) ((x & 0xFFFF) << 16) -#define SIRFUART_FIFO_THD(port) ((port->line) == 1 ? 16 : 64) -#define SIRFUART_ERR_INT_STAT(port, unit_st) \ +#define SIRFUART_FIFO_THD(port) (port->fifosize >> 1) +#define SIRFUART_ERR_INT_STAT(unit_st, uart_type) \ (uint_st->sirfsoc_rx_oflow | \ uint_st->sirfsoc_frm_err | \ uint_st->sirfsoc_rxd_brk | \ - ((port->line > 2) ? 0 : uint_st->sirfsoc_parity_err)) -#define SIRFUART_RX_IO_INT_EN(port, uint_en) \ - (uint_en->sirfsoc_rx_timeout_en |\ + ((uart_type != SIRF_REAL_UART) ? \ + 0 : uint_st->sirfsoc_parity_err)) +#define SIRFUART_RX_IO_INT_EN(uint_en, uart_type) \ + (uint_en->sirfsoc_rx_done_en |\ uint_en->sirfsoc_rxfifo_thd_en |\ uint_en->sirfsoc_rxfifo_full_en |\ uint_en->sirfsoc_frm_err_en |\ uint_en->sirfsoc_rx_oflow_en |\ uint_en->sirfsoc_rxd_brk_en |\ - ((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en)) + ((uart_type != SIRF_REAL_UART) ? \ + 0 : uint_en->sirfsoc_parity_err_en)) #define SIRFUART_RX_IO_INT_ST(uint_st) \ - (uint_st->sirfsoc_rx_timeout |\ - uint_st->sirfsoc_rxfifo_thd |\ - uint_st->sirfsoc_rxfifo_full) + (uint_st->sirfsoc_rxfifo_thd |\ + uint_st->sirfsoc_rxfifo_full|\ + uint_st->sirfsoc_rx_done |\ + uint_st->sirfsoc_rx_timeout) #define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts) -#define SIRFUART_RX_DMA_INT_EN(port, uint_en) \ - (uint_en->sirfsoc_rx_timeout_en |\ - uint_en->sirfsoc_frm_err_en |\ +#define SIRFUART_RX_DMA_INT_EN(uint_en, uart_type) \ + (uint_en->sirfsoc_frm_err_en |\ uint_en->sirfsoc_rx_oflow_en |\ uint_en->sirfsoc_rxd_brk_en |\ - ((port->line > 2) ? 0 : uint_en->sirfsoc_parity_err_en)) + ((uart_type != SIRF_REAL_UART) ? \ + 0 : uint_en->sirfsoc_parity_err_en)) /* Generic Definitions */ #define SIRFSOC_UART_NAME "ttySiRF" #define SIRFSOC_UART_MAJOR 0 #define SIRFSOC_UART_MINOR 0 #define SIRFUART_PORT_NAME "sirfsoc-uart" #define SIRFUART_MAP_SIZE 0x200 -#define SIRFSOC_UART_NR 6 +#define SIRFSOC_UART_NR 11 #define SIRFSOC_PORT_TYPE 0xa5 /* Uart Common Use Macro*/ -#define SIRFSOC_RX_DMA_BUF_SIZE 256 +#define SIRFSOC_RX_DMA_BUF_SIZE (1024 * 32) #define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3) -#define LOOP_DMA_BUFA_FILL 1 -#define LOOP_DMA_BUFB_FILL 2 -#define TX_TRAN_PIO 1 -#define TX_TRAN_DMA 2 /* Uart Fifo Level Chk */ #define SIRFUART_TX_FIFO_SC_OFFSET 0 #define SIRFUART_TX_FIFO_LC_OFFSET 10 @@ -389,8 +386,8 @@ struct sirfsoc_uart_register sirfsoc_uart = { #define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC #define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC #define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC +#define SIRFUART_RX_FIFO_MASK 0x7f /* Indicate how many buffers used */ -#define SIRFSOC_RX_LOOP_BUF_CNT 2 /* For Fast Baud Rate Calculation */ struct sirfsoc_baudrate_to_regv { @@ -404,7 +401,7 @@ enum sirfsoc_tx_state { TX_DMA_PAUSE, }; -struct sirfsoc_loop_buffer { +struct sirfsoc_rx_buffer { struct circ_buf xmit; dma_cookie_t cookie; struct dma_async_tx_descriptor *desc; @@ -417,10 +414,6 @@ struct sirfsoc_uart_port { struct uart_port port; struct clk *clk; - /* UART6 for BT usage in A7DA platform need multi-clock source */ - bool is_bt_uart; - struct clk *clk_general; - struct clk *clk_noc; /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */ bool is_atlas7; struct sirfsoc_uart_register *uart_reg; @@ -428,17 +421,16 @@ struct sirfsoc_uart_port { struct dma_chan *tx_dma_chan; dma_addr_t tx_dma_addr; struct dma_async_tx_descriptor *tx_dma_desc; - struct tasklet_struct rx_dma_complete_tasklet; - struct tasklet_struct rx_tmo_process_tasklet; unsigned int rx_io_count; unsigned long transfer_size; enum sirfsoc_tx_state tx_dma_state; unsigned int cts_gpio; unsigned int rts_gpio; - struct sirfsoc_loop_buffer rx_dma_items[SIRFSOC_RX_LOOP_BUF_CNT]; - int rx_completed; - int rx_issued; + struct sirfsoc_rx_buffer rx_dma_items; + struct hrtimer hrt; + bool is_hrt_enabled; + unsigned long rx_period_time; }; /* Register Access Control */ @@ -447,10 +439,6 @@ struct sirfsoc_uart_port { #define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg)) /* UART Port Mask */ -#define SIRFUART_FIFOLEVEL_MASK(port) ((port->line == 1) ? (0x1f) : (0x7f)) -#define SIRFUART_FIFOFULL_MASK(port) ((port->line == 1) ? (0x20) : (0x80)) -#define SIRFUART_FIFOEMPTY_MASK(port) ((port->line == 1) ? (0x40) : (0x100)) - -/* I/O Mode */ -#define SIRFSOC_UART_IO_RX_MAX_CNT 256 -#define SIRFSOC_UART_IO_TX_REASONABLE_CNT 256 +#define SIRFUART_FIFOLEVEL_MASK(port) ((port->fifosize - 1) & 0xFFF) +#define SIRFUART_FIFOFULL_MASK(port) (port->fifosize & 0xFFF) +#define SIRFUART_FIFOEMPTY_MASK(port) ((port->fifosize & 0xFFF) << 1) diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c index 582d2729f700..3866516c2926 100644 --- a/drivers/tty/serial/sprd_serial.c +++ b/drivers/tty/serial/sprd_serial.c @@ -716,7 +716,7 @@ static int sprd_probe(struct platform_device *pdev) up->flags = UPF_BOOT_AUTOCONF; clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(clk)) + if (!IS_ERR_OR_NULL(clk)) up->uartclk = clk_get_rate(clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); diff --git a/drivers/tty/serial/stm32-usart.c b/drivers/tty/serial/stm32-usart.c new file mode 100644 index 000000000000..4a6eab6da63e --- /dev/null +++ b/drivers/tty/serial/stm32-usart.c @@ -0,0 +1,739 @@ +/* + * Copyright (C) Maxime Coquelin 2015 + * Author: Maxime Coquelin <mcoquelin.stm32@gmail.com> + * License terms: GNU General Public License (GPL), version 2 + * + * Inspired by st-asc.c from STMicroelectronics (c) + */ + +#if defined(CONFIG_SERIAL_STM32_USART_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#include <linux/module.h> +#include <linux/serial.h> +#include <linux/console.h> +#include <linux/sysrq.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/delay.h> +#include <linux/spinlock.h> +#include <linux/pm_runtime.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include <linux/serial_core.h> +#include <linux/clk.h> + +#define DRIVER_NAME "stm32-usart" + +/* Register offsets */ +#define USART_SR 0x00 +#define USART_DR 0x04 +#define USART_BRR 0x08 +#define USART_CR1 0x0c +#define USART_CR2 0x10 +#define USART_CR3 0x14 +#define USART_GTPR 0x18 + +/* USART_SR */ +#define USART_SR_PE BIT(0) +#define USART_SR_FE BIT(1) +#define USART_SR_NF BIT(2) +#define USART_SR_ORE BIT(3) +#define USART_SR_IDLE BIT(4) +#define USART_SR_RXNE BIT(5) +#define USART_SR_TC BIT(6) +#define USART_SR_TXE BIT(7) +#define USART_SR_LBD BIT(8) +#define USART_SR_CTS BIT(9) +#define USART_SR_ERR_MASK (USART_SR_LBD | USART_SR_ORE | \ + USART_SR_FE | USART_SR_PE) +/* Dummy bits */ +#define USART_SR_DUMMY_RX BIT(16) + +/* USART_DR */ +#define USART_DR_MASK GENMASK(8, 0) + +/* USART_BRR */ +#define USART_BRR_DIV_F_MASK GENMASK(3, 0) +#define USART_BRR_DIV_M_MASK GENMASK(15, 4) +#define USART_BRR_DIV_M_SHIFT 4 + +/* USART_CR1 */ +#define USART_CR1_SBK BIT(0) +#define USART_CR1_RWU BIT(1) +#define USART_CR1_RE BIT(2) +#define USART_CR1_TE BIT(3) +#define USART_CR1_IDLEIE BIT(4) +#define USART_CR1_RXNEIE BIT(5) +#define USART_CR1_TCIE BIT(6) +#define USART_CR1_TXEIE BIT(7) +#define USART_CR1_PEIE BIT(8) +#define USART_CR1_PS BIT(9) +#define USART_CR1_PCE BIT(10) +#define USART_CR1_WAKE BIT(11) +#define USART_CR1_M BIT(12) +#define USART_CR1_UE BIT(13) +#define USART_CR1_OVER8 BIT(15) +#define USART_CR1_IE_MASK GENMASK(8, 4) + +/* USART_CR2 */ +#define USART_CR2_ADD_MASK GENMASK(3, 0) +#define USART_CR2_LBDL BIT(5) +#define USART_CR2_LBDIE BIT(6) +#define USART_CR2_LBCL BIT(8) +#define USART_CR2_CPHA BIT(9) +#define USART_CR2_CPOL BIT(10) +#define USART_CR2_CLKEN BIT(11) +#define USART_CR2_STOP_2B BIT(13) +#define USART_CR2_STOP_MASK GENMASK(13, 12) +#define USART_CR2_LINEN BIT(14) + +/* USART_CR3 */ +#define USART_CR3_EIE BIT(0) +#define USART_CR3_IREN BIT(1) +#define USART_CR3_IRLP BIT(2) +#define USART_CR3_HDSEL BIT(3) +#define USART_CR3_NACK BIT(4) +#define USART_CR3_SCEN BIT(5) +#define USART_CR3_DMAR BIT(6) +#define USART_CR3_DMAT BIT(7) +#define USART_CR3_RTSE BIT(8) +#define USART_CR3_CTSE BIT(9) +#define USART_CR3_CTSIE BIT(10) +#define USART_CR3_ONEBIT BIT(11) + +/* USART_GTPR */ +#define USART_GTPR_PSC_MASK GENMASK(7, 0) +#define USART_GTPR_GT_MASK GENMASK(15, 8) + +#define DRIVER_NAME "stm32-usart" +#define STM32_SERIAL_NAME "ttyS" +#define STM32_MAX_PORTS 6 + +struct stm32_port { + struct uart_port port; + struct clk *clk; + bool hw_flow_control; +}; + +static struct stm32_port stm32_ports[STM32_MAX_PORTS]; +static struct uart_driver stm32_usart_driver; + +static void stm32_stop_tx(struct uart_port *port); + +static inline struct stm32_port *to_stm32_port(struct uart_port *port) +{ + return container_of(port, struct stm32_port, port); +} + +static void stm32_set_bits(struct uart_port *port, u32 reg, u32 bits) +{ + u32 val; + + val = readl_relaxed(port->membase + reg); + val |= bits; + writel_relaxed(val, port->membase + reg); +} + +static void stm32_clr_bits(struct uart_port *port, u32 reg, u32 bits) +{ + u32 val; + + val = readl_relaxed(port->membase + reg); + val &= ~bits; + writel_relaxed(val, port->membase + reg); +} + +static void stm32_receive_chars(struct uart_port *port) +{ + struct tty_port *tport = &port->state->port; + unsigned long c; + u32 sr; + char flag; + + if (port->irq_wake) + pm_wakeup_event(tport->tty->dev, 0); + + while ((sr = readl_relaxed(port->membase + USART_SR)) & USART_SR_RXNE) { + sr |= USART_SR_DUMMY_RX; + c = readl_relaxed(port->membase + USART_DR); + flag = TTY_NORMAL; + port->icount.rx++; + + if (sr & USART_SR_ERR_MASK) { + if (sr & USART_SR_LBD) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (sr & USART_SR_ORE) { + port->icount.overrun++; + } else if (sr & USART_SR_PE) { + port->icount.parity++; + } else if (sr & USART_SR_FE) { + port->icount.frame++; + } + + sr &= port->read_status_mask; + + if (sr & USART_SR_LBD) + flag = TTY_BREAK; + else if (sr & USART_SR_PE) + flag = TTY_PARITY; + else if (sr & USART_SR_FE) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, c)) + continue; + uart_insert_char(port, sr, USART_SR_ORE, c, flag); + } + + spin_unlock(&port->lock); + tty_flip_buffer_push(tport); + spin_lock(&port->lock); +} + +static void stm32_transmit_chars(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (port->x_char) { + writel_relaxed(port->x_char, port->membase + USART_DR); + port->x_char = 0; + port->icount.tx++; + return; + } + + if (uart_tx_stopped(port)) { + stm32_stop_tx(port); + return; + } + + if (uart_circ_empty(xmit)) { + stm32_stop_tx(port); + return; + } + + writel_relaxed(xmit->buf[xmit->tail], port->membase + USART_DR); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + port->icount.tx++; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (uart_circ_empty(xmit)) + stm32_stop_tx(port); +} + +static irqreturn_t stm32_interrupt(int irq, void *ptr) +{ + struct uart_port *port = ptr; + u32 sr; + + spin_lock(&port->lock); + + sr = readl_relaxed(port->membase + USART_SR); + + if (sr & USART_SR_RXNE) + stm32_receive_chars(port); + + if (sr & USART_SR_TXE) + stm32_transmit_chars(port); + + spin_unlock(&port->lock); + + return IRQ_HANDLED; +} + +static unsigned int stm32_tx_empty(struct uart_port *port) +{ + return readl_relaxed(port->membase + USART_SR) & USART_SR_TXE; +} + +static void stm32_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + if ((mctrl & TIOCM_RTS) && (port->status & UPSTAT_AUTORTS)) + stm32_set_bits(port, USART_CR3, USART_CR3_RTSE); + else + stm32_clr_bits(port, USART_CR3, USART_CR3_RTSE); +} + +static unsigned int stm32_get_mctrl(struct uart_port *port) +{ + /* This routine is used to get signals of: DCD, DSR, RI, and CTS */ + return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS; +} + +/* Transmit stop */ +static void stm32_stop_tx(struct uart_port *port) +{ + stm32_clr_bits(port, USART_CR1, USART_CR1_TXEIE); +} + +/* There are probably characters waiting to be transmitted. */ +static void stm32_start_tx(struct uart_port *port) +{ + struct circ_buf *xmit = &port->state->xmit; + + if (uart_circ_empty(xmit)) + return; + + stm32_set_bits(port, USART_CR1, USART_CR1_TXEIE | USART_CR1_TE); +} + +/* Throttle the remote when input buffer is about to overflow. */ +static void stm32_throttle(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Unthrottle the remote, the input buffer can now accept data. */ +static void stm32_unthrottle(struct uart_port *port) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + stm32_set_bits(port, USART_CR1, USART_CR1_RXNEIE); + spin_unlock_irqrestore(&port->lock, flags); +} + +/* Receive stop */ +static void stm32_stop_rx(struct uart_port *port) +{ + stm32_clr_bits(port, USART_CR1, USART_CR1_RXNEIE); +} + +/* Handle breaks - ignored by us */ +static void stm32_break_ctl(struct uart_port *port, int break_state) +{ +} + +static int stm32_startup(struct uart_port *port) +{ + const char *name = to_platform_device(port->dev)->name; + u32 val; + int ret; + + ret = request_irq(port->irq, stm32_interrupt, IRQF_NO_SUSPEND, + name, port); + if (ret) + return ret; + + val = USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE; + stm32_set_bits(port, USART_CR1, val); + + return 0; +} + +static void stm32_shutdown(struct uart_port *port) +{ + u32 val; + + val = USART_CR1_TXEIE | USART_CR1_RXNEIE | USART_CR1_TE | USART_CR1_RE; + stm32_set_bits(port, USART_CR1, val); + + free_irq(port->irq, port); +} + +static void stm32_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct stm32_port *stm32_port = to_stm32_port(port); + unsigned int baud; + u32 usartdiv, mantissa, fraction, oversampling; + tcflag_t cflag = termios->c_cflag; + u32 cr1, cr2, cr3; + unsigned long flags; + + if (!stm32_port->hw_flow_control) + cflag &= ~CRTSCTS; + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 8); + + spin_lock_irqsave(&port->lock, flags); + + /* Stop serial port and reset value */ + writel_relaxed(0, port->membase + USART_CR1); + + cr1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE; + cr2 = 0; + cr3 = 0; + + if (cflag & CSTOPB) + cr2 |= USART_CR2_STOP_2B; + + if (cflag & PARENB) { + cr1 |= USART_CR1_PCE; + if ((cflag & CSIZE) == CS8) + cr1 |= USART_CR1_M; + } + + if (cflag & PARODD) + cr1 |= USART_CR1_PS; + + port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); + if (cflag & CRTSCTS) { + port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS; + cr3 |= USART_CR3_CTSE; + } + + usartdiv = DIV_ROUND_CLOSEST(port->uartclk, baud); + + /* + * The USART supports 16 or 8 times oversampling. + * By default we prefer 16 times oversampling, so that the receiver + * has a better tolerance to clock deviations. + * 8 times oversampling is only used to achieve higher speeds. + */ + if (usartdiv < 16) { + oversampling = 8; + stm32_set_bits(port, USART_CR1, USART_CR1_OVER8); + } else { + oversampling = 16; + stm32_clr_bits(port, USART_CR1, USART_CR1_OVER8); + } + + mantissa = (usartdiv / oversampling) << USART_BRR_DIV_M_SHIFT; + fraction = usartdiv % oversampling; + writel_relaxed(mantissa | fraction, port->membase + USART_BRR); + + uart_update_timeout(port, cflag, baud); + + port->read_status_mask = USART_SR_ORE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= USART_SR_PE | USART_SR_FE; + if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK)) + port->read_status_mask |= USART_SR_LBD; + + /* Characters to ignore */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask = USART_SR_PE | USART_SR_FE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= USART_SR_LBD; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= USART_SR_ORE; + } + + /* Ignore all characters if CREAD is not set */ + if ((termios->c_cflag & CREAD) == 0) + port->ignore_status_mask |= USART_SR_DUMMY_RX; + + writel_relaxed(cr3, port->membase + USART_CR3); + writel_relaxed(cr2, port->membase + USART_CR2); + writel_relaxed(cr1, port->membase + USART_CR1); + + spin_unlock_irqrestore(&port->lock, flags); +} + +static const char *stm32_type(struct uart_port *port) +{ + return (port->type == PORT_STM32) ? DRIVER_NAME : NULL; +} + +static void stm32_release_port(struct uart_port *port) +{ +} + +static int stm32_request_port(struct uart_port *port) +{ + return 0; +} + +static void stm32_config_port(struct uart_port *port, int flags) +{ + if (flags & UART_CONFIG_TYPE) + port->type = PORT_STM32; +} + +static int +stm32_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + /* No user changeable parameters */ + return -EINVAL; +} + +static void stm32_pm(struct uart_port *port, unsigned int state, + unsigned int oldstate) +{ + struct stm32_port *stm32port = container_of(port, + struct stm32_port, port); + unsigned long flags = 0; + + switch (state) { + case UART_PM_STATE_ON: + clk_prepare_enable(stm32port->clk); + break; + case UART_PM_STATE_OFF: + spin_lock_irqsave(&port->lock, flags); + stm32_clr_bits(port, USART_CR1, USART_CR1_UE); + spin_unlock_irqrestore(&port->lock, flags); + clk_disable_unprepare(stm32port->clk); + break; + } +} + +static const struct uart_ops stm32_uart_ops = { + .tx_empty = stm32_tx_empty, + .set_mctrl = stm32_set_mctrl, + .get_mctrl = stm32_get_mctrl, + .stop_tx = stm32_stop_tx, + .start_tx = stm32_start_tx, + .throttle = stm32_throttle, + .unthrottle = stm32_unthrottle, + .stop_rx = stm32_stop_rx, + .break_ctl = stm32_break_ctl, + .startup = stm32_startup, + .shutdown = stm32_shutdown, + .set_termios = stm32_set_termios, + .pm = stm32_pm, + .type = stm32_type, + .release_port = stm32_release_port, + .request_port = stm32_request_port, + .config_port = stm32_config_port, + .verify_port = stm32_verify_port, +}; + +static int stm32_init_port(struct stm32_port *stm32port, + struct platform_device *pdev) +{ + struct uart_port *port = &stm32port->port; + struct resource *res; + int ret; + + port->iotype = UPIO_MEM; + port->flags = UPF_BOOT_AUTOCONF; + port->ops = &stm32_uart_ops; + port->dev = &pdev->dev; + port->irq = platform_get_irq(pdev, 0); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + port->membase = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(port->membase)) + return PTR_ERR(port->membase); + port->mapbase = res->start; + + spin_lock_init(&port->lock); + + stm32port->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(stm32port->clk)) + return PTR_ERR(stm32port->clk); + + /* Ensure that clk rate is correct by enabling the clk */ + ret = clk_prepare_enable(stm32port->clk); + if (ret) + return ret; + + stm32port->port.uartclk = clk_get_rate(stm32port->clk); + if (!stm32port->port.uartclk) + ret = -EINVAL; + + clk_disable_unprepare(stm32port->clk); + + return ret; +} + +static struct stm32_port *stm32_of_get_stm32_port(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + int id; + + if (!np) + return NULL; + + id = of_alias_get_id(np, "serial"); + if (id < 0) + id = 0; + + if (WARN_ON(id >= STM32_MAX_PORTS)) + return NULL; + + stm32_ports[id].hw_flow_control = of_property_read_bool(np, + "auto-flow-control"); + stm32_ports[id].port.line = id; + return &stm32_ports[id]; +} + +#ifdef CONFIG_OF +static const struct of_device_id stm32_match[] = { + { .compatible = "st,stm32-usart", }, + { .compatible = "st,stm32-uart", }, + {}, +}; + +MODULE_DEVICE_TABLE(of, stm32_match); +#endif + +static int stm32_serial_probe(struct platform_device *pdev) +{ + int ret; + struct stm32_port *stm32port; + + stm32port = stm32_of_get_stm32_port(pdev); + if (!stm32port) + return -ENODEV; + + ret = stm32_init_port(stm32port, pdev); + if (ret) + return ret; + + ret = uart_add_one_port(&stm32_usart_driver, &stm32port->port); + if (ret) + return ret; + + platform_set_drvdata(pdev, &stm32port->port); + + return 0; +} + +static int stm32_serial_remove(struct platform_device *pdev) +{ + struct uart_port *port = platform_get_drvdata(pdev); + + return uart_remove_one_port(&stm32_usart_driver, port); +} + + +#ifdef CONFIG_SERIAL_STM32_CONSOLE +static void stm32_console_putchar(struct uart_port *port, int ch) +{ + while (!(readl_relaxed(port->membase + USART_SR) & USART_SR_TXE)) + cpu_relax(); + + writel_relaxed(ch, port->membase + USART_DR); +} + +static void stm32_console_write(struct console *co, const char *s, unsigned cnt) +{ + struct uart_port *port = &stm32_ports[co->index].port; + unsigned long flags; + u32 old_cr1, new_cr1; + int locked = 1; + + local_irq_save(flags); + if (port->sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&port->lock); + else + spin_lock(&port->lock); + + /* Save and disable interrupts */ + old_cr1 = readl_relaxed(port->membase + USART_CR1); + new_cr1 = old_cr1 & ~USART_CR1_IE_MASK; + writel_relaxed(new_cr1, port->membase + USART_CR1); + + uart_console_write(port, s, cnt, stm32_console_putchar); + + /* Restore interrupt state */ + writel_relaxed(old_cr1, port->membase + USART_CR1); + + if (locked) + spin_unlock(&port->lock); + local_irq_restore(flags); +} + +static int stm32_console_setup(struct console *co, char *options) +{ + struct stm32_port *stm32port; + int baud = 9600; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if (co->index >= STM32_MAX_PORTS) + return -ENODEV; + + stm32port = &stm32_ports[co->index]; + + /* + * This driver does not support early console initialization + * (use ARM early printk support instead), so we only expect + * this to be called during the uart port registration when the + * driver gets probed and the port should be mapped at that point. + */ + if (stm32port->port.mapbase == 0 || stm32port->port.membase == NULL) + return -ENXIO; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(&stm32port->port, co, baud, parity, bits, flow); +} + +static struct console stm32_console = { + .name = STM32_SERIAL_NAME, + .device = uart_console_device, + .write = stm32_console_write, + .setup = stm32_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &stm32_usart_driver, +}; + +#define STM32_SERIAL_CONSOLE (&stm32_console) + +#else +#define STM32_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_STM32_CONSOLE */ + +static struct uart_driver stm32_usart_driver = { + .driver_name = DRIVER_NAME, + .dev_name = STM32_SERIAL_NAME, + .major = 0, + .minor = 0, + .nr = STM32_MAX_PORTS, + .cons = STM32_SERIAL_CONSOLE, +}; + +static struct platform_driver stm32_serial_driver = { + .probe = stm32_serial_probe, + .remove = stm32_serial_remove, + .driver = { + .name = DRIVER_NAME, + .of_match_table = of_match_ptr(stm32_match), + }, +}; + +static int __init usart_init(void) +{ + static char banner[] __initdata = "STM32 USART driver initialized"; + int ret; + + pr_info("%s\n", banner); + + ret = uart_register_driver(&stm32_usart_driver); + if (ret) + return ret; + + ret = platform_driver_register(&stm32_serial_driver); + if (ret) + uart_unregister_driver(&stm32_usart_driver); + + return ret; +} + +static void __exit usart_exit(void) +{ + platform_driver_unregister(&stm32_serial_driver); + uart_unregister_driver(&stm32_usart_driver); +} + +module_init(usart_init); +module_exit(usart_exit); + +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_DESCRIPTION("STMicroelectronics STM32 serial port driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 3ddbac767db3..009e0dbc12d2 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1075,7 +1075,8 @@ static void cdns_uart_console_putchar(struct uart_port *port, int ch) writel(ch, port->membase + CDNS_UART_FIFO_OFFSET); } -static void cdns_early_write(struct console *con, const char *s, unsigned n) +static void __init cdns_early_write(struct console *con, const char *s, + unsigned n) { struct earlycon_device *dev = con->data; diff --git a/drivers/tty/synclink.c b/drivers/tty/synclink.c index b7991707ffc0..2fac7123b274 100644 --- a/drivers/tty/synclink.c +++ b/drivers/tty/synclink.c @@ -4410,7 +4410,8 @@ static void synclink_cleanup(void) printk("Unloading %s: %s\n", driver_name, driver_version); if (serial_driver) { - if ((rc = tty_unregister_driver(serial_driver))) + rc = tty_unregister_driver(serial_driver); + if (rc) printk("%s(%d) failed to unregister tty driver err=%d\n", __FILE__,__LINE__,rc); put_tty_driver(serial_driver); @@ -7751,7 +7752,8 @@ static int hdlcdev_open(struct net_device *dev) printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) + rc = hdlc_open(dev); + if (rc) return rc; /* arbitrate between network and tty opens */ @@ -8018,7 +8020,8 @@ static int hdlcdev_init(struct mgsl_struct *info) /* allocate and initialize network and HDLC layer objects */ - if (!(dev = alloc_hdlcdev(info))) { + dev = alloc_hdlcdev(info); + if (!dev) { printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); return -ENOMEM; } @@ -8039,7 +8042,8 @@ static int hdlcdev_init(struct mgsl_struct *info) hdlc->xmit = hdlcdev_xmit; /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { + rc = register_hdlc_device(dev); + if (rc) { printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); free_netdev(dev); return rc; @@ -8075,7 +8079,8 @@ static int synclink_init_one (struct pci_dev *dev, return -EIO; } - if (!(info = mgsl_allocate_device())) { + info = mgsl_allocate_device(); + if (!info) { printk("can't allocate device instance data.\n"); return -EIO; } diff --git a/drivers/tty/synclink_gt.c b/drivers/tty/synclink_gt.c index 0e8c39b6ccd4..0ea8eee00178 100644 --- a/drivers/tty/synclink_gt.c +++ b/drivers/tty/synclink_gt.c @@ -1539,7 +1539,8 @@ static int hdlcdev_open(struct net_device *dev) DBGINFO(("%s hdlcdev_open\n", dev->name)); /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) + rc = hdlc_open(dev); + if (rc) return rc; /* arbitrate between network and tty opens */ @@ -1803,7 +1804,8 @@ static int hdlcdev_init(struct slgt_info *info) /* allocate and initialize network and HDLC layer objects */ - if (!(dev = alloc_hdlcdev(info))) { + dev = alloc_hdlcdev(info); + if (!dev) { printk(KERN_ERR "%s hdlc device alloc failure\n", info->device_name); return -ENOMEM; } @@ -1824,7 +1826,8 @@ static int hdlcdev_init(struct slgt_info *info) hdlc->xmit = hdlcdev_xmit; /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { + rc = register_hdlc_device(dev); + if (rc) { printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); free_netdev(dev); return rc; @@ -1879,7 +1882,8 @@ static void rx_async(struct slgt_info *info) stat = 0; - if ((status = *(p+1) & (BIT1 + BIT0))) { + status = *(p + 1) & (BIT1 + BIT0); + if (status) { if (status & BIT1) icount->parity++; else if (status & BIT0) @@ -3755,7 +3759,8 @@ static void slgt_cleanup(void) if (serial_driver) { for (info=slgt_device_list ; info != NULL ; info=info->next_device) tty_unregister_device(serial_driver, info->line); - if ((rc = tty_unregister_driver(serial_driver))) + rc = tty_unregister_driver(serial_driver); + if (rc) DBGERR(("tty_unregister_driver error=%d\n", rc)); put_tty_driver(serial_driver); } diff --git a/drivers/tty/synclinkmp.c b/drivers/tty/synclinkmp.c index c3f90910fed9..08633a8139ff 100644 --- a/drivers/tty/synclinkmp.c +++ b/drivers/tty/synclinkmp.c @@ -1655,7 +1655,8 @@ static int hdlcdev_open(struct net_device *dev) printk("%s:hdlcdev_open(%s)\n",__FILE__,dev->name); /* generic HDLC layer open processing */ - if ((rc = hdlc_open(dev))) + rc = hdlc_open(dev); + if (rc) return rc; /* arbitrate between network and tty opens */ @@ -1922,7 +1923,8 @@ static int hdlcdev_init(SLMP_INFO *info) /* allocate and initialize network and HDLC layer objects */ - if (!(dev = alloc_hdlcdev(info))) { + dev = alloc_hdlcdev(info); + if (!dev) { printk(KERN_ERR "%s:hdlc device allocation failure\n",__FILE__); return -ENOMEM; } @@ -1943,7 +1945,8 @@ static int hdlcdev_init(SLMP_INFO *info) hdlc->xmit = hdlcdev_xmit; /* register objects with HDLC layer */ - if ((rc = register_hdlc_device(dev))) { + rc = register_hdlc_device(dev); + if (rc) { printk(KERN_WARNING "%s:unable to register hdlc device\n",__FILE__); free_netdev(dev); return rc; @@ -3920,7 +3923,8 @@ static void synclinkmp_cleanup(void) printk("Unloading %s %s\n", driver_name, driver_version); if (serial_driver) { - if ((rc = tty_unregister_driver(serial_driver))) + rc = tty_unregister_driver(serial_driver); + if (rc) printk("%s(%d) failed to unregister tty driver err=%d\n", __FILE__,__LINE__,rc); put_tty_driver(serial_driver); diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index 2f78b77f0f81..4cf263d7dffc 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -286,7 +286,8 @@ static int __tty_buffer_request_room(struct tty_port *port, size_t size, change = (b->flags & TTYB_NORMAL) && (~flags & TTYB_NORMAL); if (change || left < size) { /* This is the slow path - looking for new buffers to use */ - if ((n = tty_buffer_alloc(port, size)) != NULL) { + n = tty_buffer_alloc(port, size); + if (n != NULL) { n->flags = flags; buf->tail = n; b->commit = b->used; diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index e5695467598f..57fc6ee12332 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -235,7 +235,6 @@ static void tty_del_file(struct file *file) /** * tty_name - return tty naming * @tty: tty structure - * @buf: buffer for output * * Convert a tty structure into a name. The name reflects the kernel * naming policy and if udev is in use may not reflect user space @@ -243,13 +242,11 @@ static void tty_del_file(struct file *file) * Locking: none */ -char *tty_name(struct tty_struct *tty, char *buf) +const char *tty_name(const struct tty_struct *tty) { if (!tty) /* Hmm. NULL pointer. That's fun. */ - strcpy(buf, "NULL tty"); - else - strcpy(buf, tty->name); - return buf; + return "NULL tty"; + return tty->name; } EXPORT_SYMBOL(tty_name); @@ -770,8 +767,7 @@ static void do_tty_hangup(struct work_struct *work) void tty_hangup(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP - char buf[64]; - printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s hangup...\n", tty_name(tty)); #endif schedule_work(&tty->hangup_work); } @@ -790,9 +786,7 @@ EXPORT_SYMBOL(tty_hangup); void tty_vhangup(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP - char buf[64]; - - printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty)); #endif __tty_hangup(tty, 0); } @@ -831,9 +825,7 @@ void tty_vhangup_self(void) static void tty_vhangup_session(struct tty_struct *tty) { #ifdef TTY_DEBUG_HANGUP - char buf[64]; - - printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s vhangup session...\n", tty_name(tty)); #endif __tty_hangup(tty, 1); } @@ -1769,7 +1761,6 @@ int tty_release(struct inode *inode, struct file *filp) struct tty_struct *o_tty = NULL; int do_sleep, final; int idx; - char buf[64]; long timeout = 0; int once = 1; @@ -1793,7 +1784,7 @@ int tty_release(struct inode *inode, struct file *filp) #ifdef TTY_DEBUG_HANGUP printk(KERN_DEBUG "%s: %s (tty count=%d)...\n", __func__, - tty_name(tty, buf), tty->count); + tty_name(tty), tty->count); #endif if (tty->ops->close) @@ -1844,7 +1835,7 @@ int tty_release(struct inode *inode, struct file *filp) if (once) { once = 0; printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", - __func__, tty_name(tty, buf)); + __func__, tty_name(tty)); } schedule_timeout_killable(timeout); if (timeout < 120 * HZ) @@ -1856,13 +1847,13 @@ int tty_release(struct inode *inode, struct file *filp) if (o_tty) { if (--o_tty->count < 0) { printk(KERN_WARNING "%s: bad pty slave count (%d) for %s\n", - __func__, o_tty->count, tty_name(o_tty, buf)); + __func__, o_tty->count, tty_name(o_tty)); o_tty->count = 0; } } if (--tty->count < 0) { printk(KERN_WARNING "%s: bad tty->count (%d) for %s\n", - __func__, tty->count, tty_name(tty, buf)); + __func__, tty->count, tty_name(tty)); tty->count = 0; } @@ -1905,7 +1896,7 @@ int tty_release(struct inode *inode, struct file *filp) return 0; #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty, buf)); + printk(KERN_DEBUG "%s: %s: final close\n", __func__, tty_name(tty)); #endif /* * Ask the line discipline code to release its structures @@ -1916,7 +1907,8 @@ int tty_release(struct inode *inode, struct file *filp) tty_flush_works(tty); #ifdef TTY_DEBUG_HANGUP - printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__, tty_name(tty, buf)); + printk(KERN_DEBUG "%s: %s: freeing structure...\n", __func__, + tty_name(tty)); #endif /* * The release_tty function takes care of the details of clearing diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 8e53fe469664..5232fb60b0b1 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -211,9 +211,7 @@ int tty_unthrottle_safe(struct tty_struct *tty) void tty_wait_until_sent(struct tty_struct *tty, long timeout) { #ifdef TTY_DEBUG_WAIT_UNTIL_SENT - char buf[64]; - - printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty, buf)); + printk(KERN_DEBUG "%s wait until sent...\n", tty_name(tty)); #endif if (!timeout) timeout = MAX_SCHEDULE_TIMEOUT; diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c index 3737f55272d2..c07fb5d9bcf9 100644 --- a/drivers/tty/tty_ldisc.c +++ b/drivers/tty/tty_ldisc.c @@ -22,9 +22,8 @@ #undef LDISC_DEBUG_HANGUP #ifdef LDISC_DEBUG_HANGUP -#define tty_ldisc_debug(tty, f, args...) ({ \ - char __b[64]; \ - printk(KERN_DEBUG "%s: %s: " f, __func__, tty_name(tty, __b), ##args); \ +#define tty_ldisc_debug(tty, f, args...) ({ \ + printk(KERN_DEBUG "%s: %s: " f, __func__, tty_name(tty), ##args); \ }) #else #define tty_ldisc_debug(tty, f, args...) @@ -483,7 +482,6 @@ static void tty_ldisc_close(struct tty_struct *tty, struct tty_ldisc *ld) static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) { - char buf[64]; struct tty_ldisc *new_ldisc; int r; @@ -504,7 +502,7 @@ static void tty_ldisc_restore(struct tty_struct *tty, struct tty_ldisc *old) if (r < 0) panic("Couldn't open N_TTY ldisc for " "%s --- error %d.", - tty_name(tty, buf), r); + tty_name(tty), r); } } diff --git a/drivers/tty/tty_ldsem.c b/drivers/tty/tty_ldsem.c index 0ffb0cbe2823..ad7eba5ca380 100644 --- a/drivers/tty/tty_ldsem.c +++ b/drivers/tty/tty_ldsem.c @@ -299,7 +299,8 @@ down_write_failed(struct ld_semaphore *sem, long count, long timeout) timeout = schedule_timeout(timeout); raw_spin_lock_irq(&sem->wait_lock); set_task_state(tsk, TASK_UNINTERRUPTIBLE); - if ((locked = writer_trylock(sem))) + locked = writer_trylock(sem); + if (locked) break; } diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 59b25e039968..c8c91f0476a2 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -261,19 +261,22 @@ u16 inverse_translate(struct vc_data *conp, int glyph, int use_unicode) int m; if (glyph < 0 || glyph >= MAX_GLYPH) return 0; - else if (!(p = *conp->vc_uni_pagedir_loc)) - return glyph; - else if (use_unicode) { - if (!p->inverse_trans_unicode) + else { + p = *conp->vc_uni_pagedir_loc; + if (!p) return glyph; - else - return p->inverse_trans_unicode[glyph]; - } else { - m = inv_translate[conp->vc_num]; - if (!p->inverse_translations[m]) - return glyph; - else - return p->inverse_translations[m][glyph]; + else if (use_unicode) { + if (!p->inverse_trans_unicode) + return glyph; + else + return p->inverse_trans_unicode[glyph]; + } else { + m = inv_translate[conp->vc_num]; + if (!p->inverse_translations[m]) + return glyph; + else + return p->inverse_translations[m][glyph]; + } } } EXPORT_SYMBOL_GPL(inverse_translate); @@ -397,7 +400,8 @@ static void con_release_unimap(struct uni_pagedir *p) if (p == dflt) dflt = NULL; for (i = 0; i < 32; i++) { - if ((p1 = p->uni_pgdir[i]) != NULL) { + p1 = p->uni_pgdir[i]; + if (p1 != NULL) { for (j = 0; j < 32; j++) kfree(p1[j]); kfree(p1); @@ -473,14 +477,16 @@ con_insert_unipair(struct uni_pagedir *p, u_short unicode, u_short fontpos) int i, n; u16 **p1, *p2; - if (!(p1 = p->uni_pgdir[n = unicode >> 11])) { + p1 = p->uni_pgdir[n = unicode >> 11]; + if (!p1) { p1 = p->uni_pgdir[n] = kmalloc(32*sizeof(u16 *), GFP_KERNEL); if (!p1) return -ENOMEM; for (i = 0; i < 32; i++) p1[i] = NULL; } - if (!(p2 = p1[n = (unicode >> 6) & 0x1f])) { + p2 = p1[n = (unicode >> 6) & 0x1f]; + if (!p2) { p2 = p1[n] = kmalloc(64*sizeof(u16), GFP_KERNEL); if (!p2) return -ENOMEM; memset(p2, 0xff, 64*sizeof(u16)); /* No glyphs for the characters (yet) */ @@ -569,10 +575,12 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) * entries from "p" (old) to "q" (new). */ l = 0; /* unicode value */ - for (i = 0; i < 32; i++) - if ((p1 = p->uni_pgdir[i])) - for (j = 0; j < 32; j++) - if ((p2 = p1[j])) { + for (i = 0; i < 32; i++) { + p1 = p->uni_pgdir[i]; + if (p1) + for (j = 0; j < 32; j++) { + p2 = p1[j]; + if (p2) { for (k = 0; k < 64; k++, l++) if (p2[k] != 0xffff) { /* @@ -593,9 +601,11 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) /* Account for row of 64 empty entries */ l += 64; } + } else /* Account for empty table */ l += 32 * 64; + } /* * Finished copying font table, set vc_uni_pagedir to new table @@ -735,10 +745,12 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni ect = 0; if (*vc->vc_uni_pagedir_loc) { p = *vc->vc_uni_pagedir_loc; - for (i = 0; i < 32; i++) - if ((p1 = p->uni_pgdir[i])) - for (j = 0; j < 32; j++) - if ((p2 = *(p1++))) + for (i = 0; i < 32; i++) { + p1 = p->uni_pgdir[i]; + if (p1) + for (j = 0; j < 32; j++) { + p2 = *(p1++); + if (p2) for (k = 0; k < 64; k++) { if (*p2 < MAX_GLYPH && ect++ < ct) { __put_user((u_short)((i<<11)+(j<<6)+k), @@ -749,6 +761,8 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni } p2++; } + } + } } __put_user(ect, uct); console_unlock(); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 4a24eb2b0ede..8fe52989b380 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -108,6 +108,7 @@ #define CON_DRIVER_FLAG_MODULE 1 #define CON_DRIVER_FLAG_INIT 2 #define CON_DRIVER_FLAG_ATTR 4 +#define CON_DRIVER_FLAG_ZOMBIE 8 struct con_driver { const struct consw *con; @@ -135,6 +136,7 @@ const struct consw *conswitchp; */ #define DEFAULT_BELL_PITCH 750 #define DEFAULT_BELL_DURATION (HZ/8) +#define DEFAULT_CURSOR_BLINK_MS 200 struct vc vc_cons [MAX_NR_CONSOLES]; @@ -153,6 +155,7 @@ static int set_vesa_blanking(char __user *p); static void set_cursor(struct vc_data *vc); static void hide_cursor(struct vc_data *vc); static void console_callback(struct work_struct *ignored); +static void con_driver_unregister_callback(struct work_struct *ignored); static void blank_screen_t(unsigned long dummy); static void set_palette(struct vc_data *vc); @@ -182,6 +185,7 @@ static int blankinterval = 10*60; core_param(consoleblank, blankinterval, int, 0444); static DECLARE_WORK(console_work, console_callback); +static DECLARE_WORK(con_driver_unregister_work, con_driver_unregister_callback); /* * fg_console is the current virtual console, @@ -1590,6 +1594,13 @@ static void setterm_command(struct vc_data *vc) case 15: /* activate the previous console */ set_console(last_console); break; + case 16: /* set cursor blink duration in msec */ + if (vc->vc_npar >= 1 && vc->vc_par[1] >= 50 && + vc->vc_par[1] <= USHRT_MAX) + vc->vc_cur_blink_ms = vc->vc_par[1]; + else + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; + break; } } @@ -1717,6 +1728,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) vc->vc_bell_pitch = DEFAULT_BELL_PITCH; vc->vc_bell_duration = DEFAULT_BELL_DURATION; + vc->vc_cur_blink_ms = DEFAULT_CURSOR_BLINK_MS; gotoxy(vc, 0, 0); save_cur(vc); @@ -3192,22 +3204,6 @@ err: #ifdef CONFIG_VT_HW_CONSOLE_BINDING -static int con_is_graphics(const struct consw *csw, int first, int last) -{ - int i, retval = 0; - - for (i = first; i <= last; i++) { - struct vc_data *vc = vc_cons[i].d; - - if (vc && vc->vc_mode == KD_GRAPHICS) { - retval = 1; - break; - } - } - - return retval; -} - /* unlocked version of unbind_con_driver() */ int do_unbind_con_driver(const struct consw *csw, int first, int last, int deflt) { @@ -3293,8 +3289,7 @@ static int vt_bind(struct con_driver *con) const struct consw *defcsw = NULL, *csw = NULL; int i, more = 1, first = -1, last = -1, deflt = 0; - if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE) || - con_is_graphics(con->con, con->first, con->last)) + if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE)) goto err; csw = con->con; @@ -3345,8 +3340,7 @@ static int vt_unbind(struct con_driver *con) int i, more = 1, first = -1, last = -1, deflt = 0; int ret; - if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE) || - con_is_graphics(con->con, con->first, con->last)) + if (!con->con || !(con->flag & CON_DRIVER_FLAG_MODULE)) goto err; csw = con->con; @@ -3596,7 +3590,8 @@ static int do_register_con_driver(const struct consw *csw, int first, int last) for (i = 0; i < MAX_NR_CON_DRIVER; i++) { con_driver = ®istered_con_driver[i]; - if (con_driver->con == NULL) { + if (con_driver->con == NULL && + !(con_driver->flag & CON_DRIVER_FLAG_ZOMBIE)) { con_driver->con = csw; con_driver->desc = desc; con_driver->node = i; @@ -3658,16 +3653,20 @@ int do_unregister_con_driver(const struct consw *csw) struct con_driver *con_driver = ®istered_con_driver[i]; if (con_driver->con == csw) { - vtconsole_deinit_device(con_driver); - device_destroy(vtconsole_class, - MKDEV(0, con_driver->node)); + /* + * Defer the removal of the sysfs entries since that + * will acquire the kernfs s_active lock and we can't + * acquire this lock while holding the console lock: + * the unbind sysfs entry imposes already the opposite + * order. Reset con already here to prevent any later + * lookup to succeed and mark this slot as zombie, so + * it won't get reused until we complete the removal + * in the deferred work. + */ con_driver->con = NULL; - con_driver->desc = NULL; - con_driver->dev = NULL; - con_driver->node = 0; - con_driver->flag = 0; - con_driver->first = 0; - con_driver->last = 0; + con_driver->flag = CON_DRIVER_FLAG_ZOMBIE; + schedule_work(&con_driver_unregister_work); + return 0; } } @@ -3676,6 +3675,39 @@ int do_unregister_con_driver(const struct consw *csw) } EXPORT_SYMBOL_GPL(do_unregister_con_driver); +static void con_driver_unregister_callback(struct work_struct *ignored) +{ + int i; + + console_lock(); + + for (i = 0; i < MAX_NR_CON_DRIVER; i++) { + struct con_driver *con_driver = ®istered_con_driver[i]; + + if (!(con_driver->flag & CON_DRIVER_FLAG_ZOMBIE)) + continue; + + console_unlock(); + + vtconsole_deinit_device(con_driver); + device_destroy(vtconsole_class, MKDEV(0, con_driver->node)); + + console_lock(); + + if (WARN_ON_ONCE(con_driver->con)) + con_driver->con = NULL; + con_driver->desc = NULL; + con_driver->dev = NULL; + con_driver->node = 0; + WARN_ON_ONCE(con_driver->flag != CON_DRIVER_FLAG_ZOMBIE); + con_driver->flag = 0; + con_driver->first = 0; + con_driver->last = 0; + } + + console_unlock(); +} + /* * If we support more console drivers, this function is used * when a driver wants to take over some existing consoles diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index b97210671a81..658c34bb9076 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -402,7 +402,7 @@ static void cursor_timer_handler(unsigned long dev_addr) struct fbcon_ops *ops = info->fbcon_par; queue_work(system_power_efficient_wq, &info->queue); - mod_timer(&ops->cursor_timer, jiffies + HZ/5); + mod_timer(&ops->cursor_timer, jiffies + ops->cur_blink_jiffies); } static void fbcon_add_cursor_timer(struct fb_info *info) @@ -417,7 +417,7 @@ static void fbcon_add_cursor_timer(struct fb_info *info) init_timer(&ops->cursor_timer); ops->cursor_timer.function = cursor_timer_handler; - ops->cursor_timer.expires = jiffies + HZ / 5; + ops->cursor_timer.expires = jiffies + ops->cur_blink_jiffies; ops->cursor_timer.data = (unsigned long ) info; add_timer(&ops->cursor_timer); ops->flags |= FBCON_FLAGS_CURSOR_TIMER; @@ -1309,6 +1309,7 @@ static void fbcon_cursor(struct vc_data *vc, int mode) if (fbcon_is_inactive(vc, info) || vc->vc_deccm != 1) return; + ops->cur_blink_jiffies = msecs_to_jiffies(vc->vc_cur_blink_ms); if (vc->vc_cursor_type & 0x10) fbcon_del_cursor_timer(info); else diff --git a/drivers/video/console/fbcon.h b/drivers/video/console/fbcon.h index 6bd2e0c7f209..7aaa4eabbba0 100644 --- a/drivers/video/console/fbcon.h +++ b/drivers/video/console/fbcon.h @@ -70,6 +70,7 @@ struct fbcon_ops { struct fb_cursor cursor_state; struct display *p; int currcon; /* Current VC. */ + int cur_blink_jiffies; int cursor_flash; int cursor_reset; int blank_state; diff --git a/include/linux/console_struct.h b/include/linux/console_struct.h index e859c98d1767..e329ee2667e1 100644 --- a/include/linux/console_struct.h +++ b/include/linux/console_struct.h @@ -104,6 +104,7 @@ struct vc_data { unsigned int vc_resize_user; /* resize request from user */ unsigned int vc_bell_pitch; /* Console bell pitch */ unsigned int vc_bell_duration; /* Console bell duration */ + unsigned short vc_cur_blink_ms; /* Cursor blink duration */ struct vc_data **vc_display_fg; /* [!] Ptr to var holding fg console for this display */ struct uni_pagedir *vc_uni_pagedir; struct uni_pagedir **vc_uni_pagedir_loc; /* [!] Location of uni_pagedir variable for this console */ diff --git a/include/linux/serial_8250.h b/include/linux/serial_8250.h index 78097e7a330a..ba82c07feb95 100644 --- a/include/linux/serial_8250.h +++ b/include/linux/serial_8250.h @@ -12,6 +12,7 @@ #define _LINUX_SERIAL_8250_H #include <linux/serial_core.h> +#include <linux/serial_reg.h> #include <linux/platform_device.h> /* @@ -137,6 +138,8 @@ extern int early_serial_setup(struct uart_port *port); extern unsigned int serial8250_early_in(struct uart_port *port, int offset); extern void serial8250_early_out(struct uart_port *port, int offset, int value); +extern int early_serial8250_setup(struct earlycon_device *device, + const char *options); extern void serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old); extern int serial8250_do_startup(struct uart_port *port); diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index 025dad9dcde4..297d4fa1cfe5 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -35,7 +35,7 @@ #define uart_console(port) \ ((port)->cons && (port)->cons->index == (port)->line) #else -#define uart_console(port) (0) +#define uart_console(port) ({ (void)port; 0; }) #endif struct uart_port; diff --git a/include/linux/serial_sci.h b/include/linux/serial_sci.h index 6c5e3bb282b0..7c536ac5be05 100644 --- a/include/linux/serial_sci.h +++ b/include/linux/serial_sci.h @@ -1,6 +1,7 @@ #ifndef __LINUX_SERIAL_SCI_H #define __LINUX_SERIAL_SCI_H +#include <linux/bitops.h> #include <linux/serial_core.h> #include <linux/sh_dma.h> @@ -10,59 +11,16 @@ #define SCIx_NOT_SUPPORTED (-1) -/* SCSMR (Serial Mode Register) */ -#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */ -#define SCSMR_PE (1 << 5) /* Parity Enable */ -#define SCSMR_ODD (1 << 4) /* Odd Parity */ -#define SCSMR_STOP (1 << 3) /* Stop Bit Length */ -#define SCSMR_CKS 0x0003 /* Clock Select */ - /* Serial Control Register (@ = not supported by all parts) */ -#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */ -#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */ -#define SCSCR_TE (1 << 5) /* Transmit Enable */ -#define SCSCR_RE (1 << 4) /* Receive Enable */ -#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */ -#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */ -#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */ -#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */ -/* SCIFA/SCIFB only */ -#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */ -#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */ - -/* SCxSR (Serial Status Register) on SCI */ -#define SCI_TDRE 0x80 /* Transmit Data Register Empty */ -#define SCI_RDRF 0x40 /* Receive Data Register Full */ -#define SCI_ORER 0x20 /* Overrun Error */ -#define SCI_FER 0x10 /* Framing Error */ -#define SCI_PER 0x08 /* Parity Error */ -#define SCI_TEND 0x04 /* Transmit End */ - -#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER) - -/* SCxSR (Serial Status Register) on SCIF, HSCIF */ -#define SCIF_ER 0x0080 /* Receive Error */ -#define SCIF_TEND 0x0040 /* Transmission End */ -#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */ -#define SCIF_BRK 0x0010 /* Break Detect */ -#define SCIF_FER 0x0008 /* Framing Error */ -#define SCIF_PER 0x0004 /* Parity Error */ -#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */ -#define SCIF_DR 0x0001 /* Receive Data Ready */ - -#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK) - -/* SCFCR (FIFO Control Register) */ -#define SCFCR_LOOP (1 << 0) /* Loopback Test */ - -/* SCSPTR (Serial Port Register), optional */ -#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */ -#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */ -#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */ -#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */ - -/* HSSRR HSCIF */ -#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */ +#define SCSCR_TIE BIT(7) /* Transmit Interrupt Enable */ +#define SCSCR_RIE BIT(6) /* Receive Interrupt Enable */ +#define SCSCR_TE BIT(5) /* Transmit Enable */ +#define SCSCR_RE BIT(4) /* Receive Enable */ +#define SCSCR_REIE BIT(3) /* Receive Error Interrupt Enable @ */ +#define SCSCR_TOIE BIT(2) /* Timeout Interrupt Enable @ */ +#define SCSCR_CKE1 BIT(1) /* Clock Enable 1 */ +#define SCSCR_CKE0 BIT(0) /* Clock Enable 0 */ + enum { SCIx_PROBE_REGTYPE, @@ -82,28 +40,6 @@ enum { SCIx_NR_REGTYPES, }; -/* - * SCI register subset common for all port types. - * Not all registers will exist on all parts. - */ -enum { - SCSMR, /* Serial Mode Register */ - SCBRR, /* Bit Rate Register */ - SCSCR, /* Serial Control Register */ - SCxSR, /* Serial Status Register */ - SCFCR, /* FIFO Control Register */ - SCFDR, /* FIFO Data Count Register */ - SCxTDR, /* Transmit (FIFO) Data Register */ - SCxRDR, /* Receive (FIFO) Data Register */ - SCLSR, /* Line Status Register */ - SCTFDR, /* Transmit FIFO Data Count Register */ - SCRFDR, /* Receive FIFO Data Count Register */ - SCSPTR, /* Serial Port Register */ - HSSRR, /* Sampling Rate Register */ - - SCIx_NR_REGS, -}; - struct device; struct plat_sci_port_ops { @@ -113,7 +49,7 @@ struct plat_sci_port_ops { /* * Port-specific capabilities */ -#define SCIx_HAVE_RTSCTS (1 << 0) +#define SCIx_HAVE_RTSCTS BIT(0) /* * Platform device specific platform_data struct diff --git a/include/linux/tty.h b/include/linux/tty.h index d76631f615c2..ad6c8913aa3e 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -422,7 +422,7 @@ static inline struct tty_struct *tty_kref_get(struct tty_struct *tty) extern int tty_paranoia_check(struct tty_struct *tty, struct inode *inode, const char *routine); -extern char *tty_name(struct tty_struct *tty, char *buf); +extern const char *tty_name(const struct tty_struct *tty); extern void tty_wait_until_sent(struct tty_struct *tty, long timeout); extern int tty_check_change(struct tty_struct *tty); extern void __stop_tty(struct tty_struct *tty); diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index baa7c80da6af..c1c23f19d4a2 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -138,6 +138,7 @@ header-y += genetlink.h header-y += gen_stats.h header-y += gfs2_ondisk.h header-y += gigaset_dev.h +header-y += gsmmux.h header-y += hdlcdrv.h header-y += hdlc.h header-y += hdreg.h diff --git a/include/linux/gsmmux.h b/include/uapi/linux/gsmmux.h index c25e9477f7c3..c06742d52856 100644 --- a/include/linux/gsmmux.h +++ b/include/uapi/linux/gsmmux.h @@ -1,6 +1,9 @@ #ifndef _LINUX_GSMMUX_H #define _LINUX_GSMMUX_H +#include <linux/if.h> +#include <linux/ioctl.h> + struct gsm_config { unsigned int adaption; diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index b2122813f18a..93ba148f923e 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -258,4 +258,7 @@ /* Cris v10 / v32 SoC */ #define PORT_CRIS 112 +/* STM32 USART */ +#define PORT_STM32 113 + #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/tty_flags.h b/include/uapi/linux/tty_flags.h index fae4864737fa..072e41e45ee2 100644 --- a/include/uapi/linux/tty_flags.h +++ b/include/uapi/linux/tty_flags.h @@ -15,7 +15,7 @@ #define ASYNCB_FOURPORT 1 /* Set OU1, OUT2 per AST Fourport settings */ #define ASYNCB_SAK 2 /* Secure Attention Key (Orange book) */ #define ASYNCB_SPLIT_TERMIOS 3 /* [x] Separate termios for dialin/callout */ -#define ASYNCB_SPD_HI 4 /* Use 56000 instead of 38400 bps */ +#define ASYNCB_SPD_HI 4 /* Use 57600 instead of 38400 bps */ #define ASYNCB_SPD_VHI 5 /* Use 115200 instead of 38400 bps */ #define ASYNCB_SKIP_TEST 6 /* Skip UART test during autoconfiguration */ #define ASYNCB_AUTO_IRQ 7 /* Do automatic IRQ during |