diff options
author | Claudiu Beznea | 2018-08-30 14:50:06 +0300 |
---|---|---|
committer | Sebastian Reichel | 2018-09-16 12:31:48 +0200 |
commit | 9f7195da31fb0b0f83dbd6bbe7aa98c889fb865a (patch) | |
tree | b2e2bf2d4a306afc2fc84de7cbebae3fa1106062 | |
parent | 5b394b2ddf0347bef56e50c69a58773c94343ff3 (diff) |
power: reset: at91-poweroff: switch to slow clock before shutdown
The SAMA5D2 NRST input signal is resynchronized with the SLCK clock and it
can take up to 2 SLCK cycles (about 90us) for the internal reset to be
effective. During this delay, the VDDCORE current consumption may still be
high (application-dependent) with the VDDCORE regulator already OFF. Under
such conditions, VDDCORE may operate below its operating range leading to
potential register corruption.
To prevent such situation, it is recommended to decrease significantly the
power consumption of the device once the voltage regulator is turned-off.
This can be achieved by operating the device at a much lower low frequency.
To solve this switch the master clock to slock clock just before writing
shutdown command to shutdown controller.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Suggested-by: Patrice Vilchez <patrice.vilchez@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
-rw-r--r-- | arch/arm/mach-at91/pm_suspend.S | 8 | ||||
-rw-r--r-- | drivers/power/reset/at91-sama5d2_shdwc.c | 66 |
2 files changed, 66 insertions, 8 deletions
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index a7c6ae13c945..bfe1c4d06901 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -149,6 +149,14 @@ exit_suspend: ENDPROC(at91_pm_suspend_in_sram) ENTRY(at91_backup_mode) + /* Switch the master clock source to slow clock. */ + ldr pmc, .pmc_base + ldr tmp1, [pmc, #AT91_PMC_MCKR] + bic tmp1, tmp1, #AT91_PMC_CSS + str tmp1, [pmc, #AT91_PMC_MCKR] + + wait_mckrdy + /*BUMEN*/ ldr r0, .sfr mov tmp1, #0x1 diff --git a/drivers/power/reset/at91-sama5d2_shdwc.c b/drivers/power/reset/at91-sama5d2_shdwc.c index 0206cce328b3..dd6297bd7b6a 100644 --- a/drivers/power/reset/at91-sama5d2_shdwc.c +++ b/drivers/power/reset/at91-sama5d2_shdwc.c @@ -19,6 +19,7 @@ */ #include <linux/clk.h> +#include <linux/clk/at91_pmc.h> #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> @@ -70,6 +71,7 @@ struct shdwc_config { struct shdwc { const struct shdwc_config *cfg; void __iomem *at91_shdwc_base; + void __iomem *pmc_base; }; /* @@ -108,6 +110,12 @@ static void __init at91_wakeup_status(struct platform_device *pdev) static void at91_poweroff(void) { + /* Switch the master clock source to slow clock. */ + writel(readl(at91_shdwc->pmc_base + AT91_PMC_MCKR) & ~AT91_PMC_CSS, + at91_shdwc->pmc_base + AT91_PMC_MCKR); + while (!(readl(at91_shdwc->pmc_base + AT91_PMC_SR) & AT91_PMC_MCKRDY)) + ; + writel(AT91_SHDW_KEY | AT91_SHDW_SHDW, at91_shdwc->at91_shdwc_base + AT91_SHDW_CR); } @@ -123,6 +131,16 @@ static void at91_lpddr_poweroff(void) /* Power down SDRAM0 */ " str %1, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t" + + /* Switch the master clock source to slow clock. */ + " ldr r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t" + " bic r6, r6, #" __stringify(AT91_PMC_CSS) "\n\t" + " str r6, [%4, #" __stringify(AT91_PMC_MCKR) "]\n\t" + /* Wait for clock switch. */ + "1: ldr r6, [%4, #" __stringify(AT91_PMC_SR) "]\n\t" + " tst r6, #" __stringify(AT91_PMC_MCKRDY) "\n\t" + " beq 1b\n\t" + /* Shutdown CPU */ " str %3, [%2, #" __stringify(AT91_SHDW_CR) "]\n\t" @@ -131,7 +149,8 @@ static void at91_lpddr_poweroff(void) : "r" (mpddrc_base), "r" cpu_to_le32(AT91_DDRSDRC_LPDDR2_PWOFF), "r" (at91_shdwc->at91_shdwc_base), - "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW) + "r" cpu_to_le32(AT91_SHDW_KEY | AT91_SHDW_SHDW), + "r" (at91_shdwc->pmc_base) : "r6"); } @@ -276,26 +295,53 @@ static int __init at91_shdwc_probe(struct platform_device *pdev) at91_shdwc_dt_configure(pdev); - pm_power_off = at91_poweroff; + np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-pmc"); + if (!np) { + ret = -ENODEV; + goto clk_disable; + } + + at91_shdwc->pmc_base = of_iomap(np, 0); + of_node_put(np); + + if (!at91_shdwc->pmc_base) { + ret = -ENOMEM; + goto clk_disable; + } np = of_find_compatible_node(NULL, NULL, "atmel,sama5d3-ddramc"); - if (!np) - return 0; + if (!np) { + ret = -ENODEV; + goto unmap; + } mpddrc_base = of_iomap(np, 0); of_node_put(np); - if (!mpddrc_base) - return 0; + if (!mpddrc_base) { + ret = -ENOMEM; + goto unmap; + } + + pm_power_off = at91_poweroff; ddr_type = readl(mpddrc_base + AT91_DDRSDRC_MDR) & AT91_DDRSDRC_MD; if ((ddr_type == AT91_DDRSDRC_MD_LPDDR2) || - (ddr_type == AT91_DDRSDRC_MD_LPDDR3)) + (ddr_type == AT91_DDRSDRC_MD_LPDDR3)) { pm_power_off = at91_lpddr_poweroff; - else + } else { iounmap(mpddrc_base); + mpddrc_base = NULL; + } return 0; + +unmap: + iounmap(at91_shdwc->pmc_base); +clk_disable: + clk_disable_unprepare(sclk); + + return ret; } static int __exit at91_shdwc_remove(struct platform_device *pdev) @@ -310,6 +356,10 @@ static int __exit at91_shdwc_remove(struct platform_device *pdev) writel(0, shdw->at91_shdwc_base + AT91_SHDW_MR); writel(0, shdw->at91_shdwc_base + AT91_SHDW_WUIR); + if (mpddrc_base) + iounmap(mpddrc_base); + iounmap(shdw->pmc_base); + clk_disable_unprepare(sclk); return 0; |