Merge branch 'next-i2c-mpc-v8' into next-i2c

3 files changed, 146 insertions, 85 deletions

diff --git a/Documentation/powerpc/dts-bindings/fsl/i2c.txt b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
index b6d2e21474f9..50da20310585 100644
--- a/Documentation/powerpc/dts-bindings/fsl/i2c.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/i2c.txt
@@ -2,15 +2,14 @@
 
 Required properties :
 
- - device_type : Should be "i2c"
  - reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+   compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+   mpc5200 or mpc5200b. For the mpc5121, an additional node
+   "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
 
 Recommended properties :
 
- - compatible : compatibility list with 2 entries, the first should
-   be "fsl,CHIP-i2c" where CHIP is the name of a compatible processor,
-   e.g. mpc8313, mpc8543, mpc8544, mpc5200 or mpc5200b. The second one
-   should be "fsl-i2c".
  - interrupts : <a b> where a is the interrupt number and b is a
    field that represents an encoding of the sense and level
    information for the interrupt.  This should be encoded based on
@@ -24,25 +23,40 @@ Recommended properties :
 
 Examples :
 
+	/* MPC5121 based board */
+	i2c@1740 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+		reg = <0x1740 0x20>;
+		interrupts = <11 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <100000>;
+	};
+
+	i2ccontrol@1760 {
+		compatible = "fsl,mpc5121-i2c-ctrl";
+		reg = <0x1760 0x8>;
+	};
+
+	/* MPC5200B based board */
 	i2c@3d00 {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-		cell-index = <0>;
 		reg = <0x3d00 0x40>;
 		interrupts = <2 15 0>;
 		interrupt-parent = <&mpc5200_pic>;
 		fsl,preserve-clocking;
 	};
 
+	/* MPC8544 base board */
 	i2c@3100 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		cell-index = <1>;
 		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
 		reg = <0x3100 0x100>;
 		interrupts = <43 2>;
 		interrupt-parent = <&mpic>;
 		clock-frequency = <400000>;
 	};
-
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 10041813c6ed..ecf079b7f931 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -419,13 +419,12 @@ config I2C_IXP2000
 	  instead.
 
 config I2C_MPC
-	tristate "MPC107/824x/85xx/52xx/86xx"
+	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC32
 	help
 	  If you say yes to this option, support will be included for the
-	  built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
-	  MPC85xx/MPC8641 family processors. The driver may also work on 52xx
-	  family processors, though interrupts are known not to work.
+	  built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
+	  MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mpc.
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f627001108b8..78a15af32942 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -31,6 +31,9 @@
 
 #define DRV_NAME "mpc-i2c"
 
+#define MPC_I2C_CLOCK_LEGACY   0
+#define MPC_I2C_CLOCK_PRESERVE (~0U)
+
 #define MPC_I2C_FDR   0x04
 #define MPC_I2C_CR    0x08
 #define MPC_I2C_SR    0x0c
@@ -66,10 +69,9 @@ struct mpc_i2c_divider {
 	u16 fdr;	/* including dfsrr */
 };
 
-struct mpc_i2c_match_data {
-	void (*setclock)(struct device_node *node,
-			 struct mpc_i2c *i2c,
-			 u32 clock, u32 prescaler);
+struct mpc_i2c_data {
+	void (*setup)(struct device_node *node, struct mpc_i2c *i2c,
+		      u32 clock, u32 prescaler);
 	u32 prescaler;
 };
 
@@ -164,8 +166,8 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
 	return 0;
 }
 
-#ifdef CONFIG_PPC_MPC52xx
-static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
+static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
 	{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
 	{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
 	{36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
@@ -186,14 +188,15 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
 	{10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
 };
 
-int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
+static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
+					  int prescaler)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	unsigned int pvr = mfspr(SPRN_PVR);
 	u32 divider;
 	int i;
 
-	if (!clock)
+	if (clock == MPC_I2C_CLOCK_LEGACY)
 		return -EINVAL;
 
 	/* Determine divider value */
@@ -215,12 +218,18 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
 	return div ? (int)div->fdr : -EINVAL;
 }
 
-static void mpc_i2c_setclock_52xx(struct device_node *node,
-				  struct mpc_i2c *i2c,
-				  u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
 {
 	int ret, fdr;
 
+	if (clock == MPC_I2C_CLOCK_PRESERVE) {
+		dev_dbg(i2c->dev, "using fdr %d\n",
+			readb(i2c->base + MPC_I2C_FDR));
+		return;
+	}
+
 	ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
 	fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
 
@@ -229,16 +238,52 @@ static void mpc_i2c_setclock_52xx(struct device_node *node,
 	if (ret >= 0)
 		dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
 }
-#else /* !CONFIG_PPC_MPC52xx */
-static void mpc_i2c_setclock_52xx(struct device_node *node,
-				  struct mpc_i2c *i2c,
-				  u32 clock, u32 prescaler)
+#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_PPC_MPC512x
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
+{
+	struct device_node *node_ctrl;
+	void __iomem *ctrl;
+	const u32 *pval;
+	u32 idx;
+
+	/* Enable I2C interrupts for mpc5121 */
+	node_ctrl = of_find_compatible_node(NULL, NULL,
+					    "fsl,mpc5121-i2c-ctrl");
+	if (node_ctrl) {
+		ctrl = of_iomap(node_ctrl, 0);
+		if (ctrl) {
+			/* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
+			pval = of_get_property(node, "reg", NULL);
+			idx = (*pval & 0xff) / 0x20;
+			setbits32(ctrl, 1 << (24 + idx * 2));
+			iounmap(ctrl);
+		}
+		of_node_put(node_ctrl);
+	}
+
+	/* The clock setup for the 52xx works also fine for the 512x */
+	mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+}
+#else /* CONFIG_PPC_MPC512x */
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
 {
 }
-#endif /* CONFIG_PPC_MPC52xx*/
+#endif /* CONFIG_PPC_MPC512x */
 
 #ifdef CONFIG_FSL_SOC
-static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
+static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] __devinitconst = {
 	{160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
 	{288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
 	{416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
@@ -258,7 +303,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
 	{49152, 0x011e}, {61440, 0x011f}
 };
 
-u32 mpc_i2c_get_sec_cfg_8xxx(void)
+static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void)
 {
 	struct device_node *node = NULL;
 	u32 __iomem *reg;
@@ -287,13 +332,14 @@ u32 mpc_i2c_get_sec_cfg_8xxx(void)
 	return val;
 }
 
-int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
+static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
+					  u32 prescaler)
 {
 	const struct mpc_i2c_divider *div = NULL;
 	u32 divider;
 	int i;
 
-	if (!clock)
+	if (clock == MPC_I2C_CLOCK_LEGACY)
 		return -EINVAL;
 
 	/* Determine proper divider value */
@@ -320,12 +366,19 @@ int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
 	return div ? (int)div->fdr : -EINVAL;
 }
 
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
-				  struct mpc_i2c *i2c,
-				  u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
 {
 	int ret, fdr;
 
+	if (clock == MPC_I2C_CLOCK_PRESERVE) {
+		dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
+			readb(i2c->base + MPC_I2C_DFSRR),
+			readb(i2c->base + MPC_I2C_FDR));
+		return;
+	}
+
 	ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
 	fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
 
@@ -338,9 +391,9 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node,
 }
 
 #else /* !CONFIG_FSL_SOC */
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
-				  struct mpc_i2c *i2c,
-				  u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+					 struct mpc_i2c *i2c,
+					 u32 clock, u32 prescaler)
 {
 }
 #endif /* CONFIG_FSL_SOC */
@@ -494,7 +547,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 {
 	struct mpc_i2c *i2c;
 	const u32 *prop;
-	u32 clock = 0;
+	u32 clock = MPC_I2C_CLOCK_LEGACY;
 	int result = 0;
 	int plen;
 
@@ -523,21 +576,21 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
 		}
 	}
 
-	if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+	if (of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+		clock = MPC_I2C_CLOCK_PRESERVE;
+	} else {
 		prop = of_get_property(op->node, "clock-frequency", &plen);
 		if (prop && plen == sizeof(u32))
 			clock = *prop;
+	}
 
-		if (match->data) {
-			struct mpc_i2c_match_data *data =
-				(struct mpc_i2c_match_data *)match->data;
-			data->setclock(op->node, i2c, clock, data->prescaler);
-		} else {
-			/* Backwards compatibility */
-			if (of_get_property(op->node, "dfsrr", NULL))
-				mpc_i2c_setclock_8xxx(op->node, i2c,
-						      clock, 0);
-		}
+	if (match->data) {
+		struct mpc_i2c_data *data = match->data;
+		data->setup(op->node, i2c, clock, data->prescaler);
+	} else {
+		/* Backwards compatibility */
+		if (of_get_property(op->node, "dfsrr", NULL))
+			mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
 	}
 
 	dev_set_drvdata(&op->dev, i2c);
@@ -582,47 +635,42 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
 	return 0;
 };
 
+static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
+	.setup = mpc_i2c_setup_512x,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata = {
+	.setup = mpc_i2c_setup_52xx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8313 __devinitdata = {
+	.setup = mpc_i2c_setup_8xxx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8543 __devinitdata = {
+	.setup = mpc_i2c_setup_8xxx,
+	.prescaler = 2,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8544 __devinitdata = {
+	.setup = mpc_i2c_setup_8xxx,
+	.prescaler = 3,
+};
+
 static const struct of_device_id mpc_i2c_of_match[] = {
-	{.compatible = "mpc5200-i2c",
-	 .data = &(struct mpc_i2c_match_data) {
-			.setclock = mpc_i2c_setclock_52xx,
-		},
-	},
-	{.compatible = "fsl,mpc5200b-i2c",
-	 .data = &(struct mpc_i2c_match_data) {
-			.setclock = mpc_i2c_setclock_52xx,
-		},
-	},
-	{.compatible = "fsl,mpc5200-i2c",
-	 .data = &(struct mpc_i2c_match_data) {
-			.setclock = mpc_i2c_setclock_52xx,
-		},
-	},
-	{.compatible = "fsl,mpc8313-i2c",
-	 .data = &(struct mpc_i2c_match_data) {
-			.setclock = mpc_i2c_setclock_8xxx,
-		},
-	},
-	{.compatible = "fsl,mpc8543-i2c",
-	 .data = &(struct mpc_i2c_match_data) {
-			.setclock = mpc_i2c_setclock_8xxx,
-			.prescaler = 2,
-		},
-	},
-	{.compatible = "fsl,mpc8544-i2c",
-	 .data = &(struct mpc_i2c_match_data) {
-			.setclock = mpc_i2c_setclock_8xxx,
-			.prescaler = 3,
-		},
+	{.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+	{.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
+	{.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+	{.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
+	{.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
+	{.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
+	{.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
 	/* Backward compatibility */
-	},
 	{.compatible = "fsl-i2c", },
 	{},
 };
-
 MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
 
-
 /* Structure for a device driver */
 static struct of_platform_driver mpc_i2c_driver = {
 	.match_table	= mpc_i2c_of_match,
@@ -655,5 +703,5 @@ module_exit(fsl_i2c_exit);
 
 MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
 MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
-		   "MPC824x/85xx/52xx processors");
+		   "MPC824x/83xx/85xx/86xx/512x/52xx processors");
 MODULE_LICENSE("GPL");