Merge tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown: "Hardly anything going on in the core this time around with the regulator API and pretty quiet on the driver front: - An API for comparing regulators, useful for devices that need to check if supply voltages exactly match rather than just nominally match. - Conversion of several DT bindings to YAML format. - Conversion of I2C drivers to probe_new(). - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828" * tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits) dt-bindings: regulator: add document bindings for mpq7920 regulator: core: Fix exported symbols to the exported GPL version regulator: mpq7920: Fix incorrect defines regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warnings regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage regulator fix for "regulator: core: Add regulator_is_equal() helper" regulator: core: Add regulator_is_equal() helper regulator: mpq7920: Convert to use .probe_new regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_info regulator: vqmmc-ipq4019: Trivial clean up regulator: vqmmc-ipq4019: Remove ipq4019_regulator_remove regulator: bindings: Drop document bindings for mpq7920 dt-bindings: Drop entry for Monolithic Power System, MPS regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits regulator: add IPQ4019 SDHCI VQMMC LDO driver regulator: Convert i2c drivers to use .probe_new regulator: mpq7920: Check the correct variable in mpq7920_regulator_register() regulator: mpq7920: Fix Woverflow warning on conversion regulator: mp8859: tidy up white space in probe regulator: mpq7920: add mpq7920 regulator driver ...
author: Linus Torvalds 2020-01-27 11:18:55 -0800
committer: Linus Torvalds 2020-01-27 11:18:55 -0800
commit: aae1464f46a2403565f75717438118691d31ccf1 (patch)
tree: 17887992bc955719d5cc449bee73b90f8284d7ed
parent: 1e1ab4ba4747afad3e44a77dded1bab4cb77049e (diff)
parent: e4e4c2ff78edd2f9c7d2d3e588ca68ffa1dd8dc8 (diff)
38 files changed, 2014 insertions, 156 deletions
diff --git a/Documentation/devicetree/bindings/regulator/mp8859.txt b/Documentation/devicetree/bindings/regulator/mp8859.txt
new file mode 100644
index 000000000000..74ad69730989
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mp8859.txt
@@ -0,0 +1,22 @@
+Monolithic Power Systems MP8859 voltage regulator
+
+Required properties:
+- compatible: "mps,mp8859";
+- reg: I2C slave address.
+
+Optional subnode for regulator: "mp8859_dcdc", using common regulator
+bindings given in <Documentation/devicetree/bindings/regulator/regulator.txt>.
+
+Example:
+
+	mp8859: regulator@66 {
+		compatible = "mps,mp8859";
+		reg = <0x66>;
+		dc_12v: mp8859_dcdc {
+			regulator-name = "dc_12v";
+			regulator-min-microvolt = <12000000>;
+			regulator-max-microvolt = <12000000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
new file mode 100644
index 000000000000..a682af0dc67e
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mps,mpq7920.yaml
@@ -0,0 +1,121 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mps,mpq7920.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power System MPQ7920 PMIC
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+properties:
+  $nodename:
+    pattern: "pmic@[0-9a-f]{1,2}"
+  compatible:
+    enum:
+      - mps,mpq7920
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description: |
+      list of regulators provided by this controller, must be named
+      after their hardware counterparts BUCK[1-4], one LDORTC, and LDO[2-5]
+
+    properties:
+      mps,switch-freq:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint8"
+        enum: [ 0, 1, 2, 3 ]
+        default: 2
+        description: |
+          switching frequency must be one of following corresponding value
+          1.1MHz, 1.65MHz, 2.2MHz, 2.75MHz
+
+    patternProperties:
+      "^ldo[1-4]$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+      "^ldortc$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+      "^buck[1-4]$":
+        type: object
+        allOf:
+          - $ref: regulator.yaml#
+
+        properties:
+          mps,buck-softstart:
+            allOf:
+              - $ref: "/schemas/types.yaml#/definitions/uint8"
+            enum: [ 0, 1, 2, 3 ]
+            description: |
+              defines the soft start time of this buck, must be one of the following
+              corresponding values 150us, 300us, 610us, 920us
+
+          mps,buck-phase-delay:
+            allOf:
+              - $ref: "/schemas/types.yaml#/definitions/uint8"
+            enum: [ 0, 1, 2, 3 ]
+            description: |
+              defines the phase delay of this buck, must be one of the following
+              corresponding values 0deg, 90deg, 180deg, 270deg
+
+          mps,buck-ovp-disable:
+            type: boolean
+            description: |
+              disables over voltage protection of this buck
+
+      additionalProperties: false
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+          compatible = "mps,mpq7920";
+          reg = <0x69>;
+
+          regulators {
+            mps,switch-freq = /bits/ 8 <1>;
+
+            buck1 {
+             regulator-name = "buck1";
+             regulator-min-microvolt = <400000>;
+             regulator-max-microvolt = <3587500>;
+             regulator-min-microamp  = <460000>;
+             regulator-max-microamp  = <7600000>;
+             regulator-boot-on;
+             mps,buck-ovp-disable;
+             mps,buck-phase-delay = /bits/ 8 <2>;
+             mps,buck-softstart = /bits/ 8 <1>;
+            };
+
+            ldo2 {
+             regulator-name = "ldo2";
+             regulator-min-microvolt = <650000>;
+             regulator-max-microvolt = <3587500>;
+            };
+         };
+       };
+     };
+...
diff --git a/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
new file mode 100644
index 000000000000..71ce032b8cf8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/rohm,bd71828-regulator.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/rohm,bd71828-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit regulators
+
+maintainers:
+  - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+  This module is part of the ROHM BD71828 MFD device. For more details
+  see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+  The regulator controller is represented as a sub-node of the PMIC node
+  on the device tree.
+
+  Regulator nodes should be named to BUCK_<number> and LDO_<number>.
+  The valid names for BD71828 regulator nodes are
+  BUCK1, BUCK2, BUCK3, BUCK4, BUCK5, BUCK6, BUCK7
+  LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7
+
+patternProperties:
+  "^LDO[1-7]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single LDO regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^ldo[1-7]$"
+        description:
+          should be "ldo1", ..., "ldo7"
+
+  "^BUCK[1-7]$":
+    type: object
+    allOf:
+      - $ref: regulator.yaml#
+    description:
+      Properties for single BUCK regulator.
+
+    properties:
+      regulator-name:
+        pattern: "^buck[1-7]$"
+        description:
+          should be "buck1", ..., "buck7"
+
+      rohm,dvs-run-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "RUN" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-idle-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "IDLE" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-suspend-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "SUSPEND" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+      rohm,dvs-lpsr-voltage:
+        allOf:
+          - $ref: "/schemas/types.yaml#/definitions/uint32"
+          - minimum: 0
+            maximum: 3300000
+        description:
+          PMIC default "LPSR" state voltage in uV. See below table for
+          bucks which support this. 0 means disabled.
+
+        # Supported default DVS states:
+        #     buck       |    run     |   idle    | suspend  | lpsr
+        #--------------------------------------------------------------
+        # 1, 2, 6, and 7 | supported  | supported | supported (*)
+        #--------------------------------------------------------------
+        # 3, 4, and 5    |                    supported (**)
+        #--------------------------------------------------------------
+        #
+        #(*)  LPSR and SUSPEND states use same voltage but both states have own
+        #     enable /
+        #     disable settings. Voltage 0 can be specified for a state to make
+        #     regulator disabled on that state.
+        #
+        #(**) All states use same voltage but have own enable / disable
+        #     settings. Voltage 0 can be specified for a state to make
+        #     regulator disabled on that state.
+
+    required:
+      - regulator-name
+  additionalProperties: false
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt b/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt
deleted file mode 100644
index 479ad4c8758e..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stm32-booster.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-STM32 BOOSTER - Booster for ADC analog input switches
-
-Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
-to supply ADC analog input switches.
-
-Required properties:
-- compatible: Should be one of:
-  "st,stm32h7-booster"
-  "st,stm32mp1-booster"
-- st,syscfg: Phandle to system configuration controller.
-- vdda-supply: Phandle to the vdda input analog voltage.
-
-Example:
-	booster: regulator-booster {
-		compatible = "st,stm32mp1-booster";
-		st,syscfg = <&syscfg>;
-		vdda-supply = <&vdda>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
new file mode 100644
index 000000000000..64f1183ce841
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-booster.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-booster.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 booster for ADC analog input switches bindings
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+description: |
+  Some STM32 devices embed a 3.3V booster supplied by Vdda, that can be used
+  to supply ADC analog input switches.
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    enum:
+      - st,stm32h7-booster
+      - st,stm32mp1-booster
+
+  st,syscfg:
+    allOf:
+      - $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    description: phandle to system configuration controller.
+
+  vdda-supply:
+    description: phandle to the vdda input analog voltage.
+
+required:
+  - compatible
+  - st,syscfg
+  - vdda-supply
+
+examples:
+  - |
+    regulator-booster {
+      compatible = "st,stm32mp1-booster";
+      st,syscfg = <&syscfg>;
+      vdda-supply = <&vdda>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
deleted file mode 100644
index 5ddb8500a929..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-STM32 VREFBUF - Voltage reference buffer
-
-Some STM32 devices embed a voltage reference buffer which can be used as
-voltage reference for ADCs, DACs and also as voltage reference for external
-components through the dedicated VREF+ pin.
-
-Required properties:
-- compatible:		Must be "st,stm32-vrefbuf".
-- reg:			Offset and length of VREFBUF register set.
-- clocks:		Must contain an entry for peripheral clock.
-
-Example:
-	vrefbuf: regulator@58003c00 {
-		compatible = "st,stm32-vrefbuf";
-		reg = <0x58003C00 0x8>;
-		clocks = <&rcc VREF_CK>;
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <2500000>;
-		vdda-supply = <&vdda>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
new file mode 100644
index 000000000000..33cdaeb25aee
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32-vrefbuf.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32-vrefbuf.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Voltage reference buffer bindings
+
+description: |
+  Some STM32 devices embed a voltage reference buffer which can be used as
+  voltage reference for ADCs, DACs and also as voltage reference for external
+  components through the dedicated VREF+ pin.
+
+maintainers:
+  - Fabrice Gasnier <fabrice.gasnier@st.com>
+
+allOf:
+  - $ref: "regulator.yaml#"
+
+properties:
+  compatible:
+    const: st,stm32-vrefbuf
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vdda-supply:
+    description: phandle to the vdda input analog voltage.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - vdda-supply
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    vrefbuf@50025000 {
+      compatible = "st,stm32-vrefbuf";
+      reg = <0x50025000 0x8>;
+      regulator-min-microvolt = <1500000>;
+      regulator-max-microvolt = <2500000>;
+      clocks = <&rcc VREF>;
+      vdda-supply = <&vdda>;
+    };
+
+...
+
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
deleted file mode 100644
index e372dd3f0c8a..000000000000
--- a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-STM32MP1 PWR Regulators
------------------------
-
-Available Regulators in STM32MP1 PWR block are:
-  - reg11 for regulator 1V1
-  - reg18 for regulator 1V8
-  - usb33 for the swtich USB3V3
-
-Required properties:
-- compatible: Must be "st,stm32mp1,pwr-reg"
-- list of child nodes that specify the regulator reg11, reg18 or usb33
-  initialization data for defined regulators. The definition for each of
-  these nodes is defined using the standard binding for regulators found at
-  Documentation/devicetree/bindings/regulator/regulator.txt.
-- vdd-supply: phandle to the parent supply/regulator node for vdd input
-- vdd_3v3_usbfs-supply: phandle to the parent supply/regulator node for usb33
-
-Example:
-
-pwr_regulators: pwr@50001000 {
-	compatible = "st,stm32mp1,pwr-reg";
-	reg = <0x50001000 0x10>;
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-
-	reg11: reg11 {
-		regulator-name = "reg11";
-		regulator-min-microvolt = <1100000>;
-		regulator-max-microvolt = <1100000>;
-	};
-
-	reg18: reg18 {
-		regulator-name = "reg18";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
-	usb33: usb33 {
-		regulator-name = "usb33";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
new file mode 100644
index 000000000000..8d8f38fe85dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/st,stm32mp1-pwr-reg.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/st,stm32mp1-pwr-reg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32MP1 PWR voltage regulators
+
+maintainers:
+  - Pascal Paillet <p.paillet@st.com>
+
+properties:
+  compatible:
+    const: st,stm32mp1,pwr-reg
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: Input supply phandle(s) for vdd input
+
+  vdd_3v3_usbfs-supply:
+    description: Input supply phandle(s) for vdd_3v3_usbfs input
+
+patternProperties:
+  "^(reg11|reg18|usb33)$":
+    type: object
+
+    allOf:
+      - $ref: "regulator.yaml#"
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pwr@50001000 {
+      compatible = "st,stm32mp1,pwr-reg";
+      reg = <0x50001000 0x10>;
+      vdd-supply = <&vdd>;
+      vdd_3v3_usbfs-supply = <&vdd_usb>;
+
+      reg11 {
+        regulator-name = "reg11";
+        regulator-min-microvolt = <1100000>;
+        regulator-max-microvolt = <1100000>;
+      };
+
+      reg18 {
+        regulator-name = "reg18";
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+      };
+
+      usb33 {
+        regulator-name = "usb33";
+        regulator-min-microvolt = <3300000>;
+        regulator-max-microvolt = <3300000>;
+      };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 1575d416f2db..5924365f36b2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11174,6 +11174,13 @@ S:	Maintained
 F:	Documentation/driver-api/serial/moxa-smartio.rst
 F:	drivers/tty/mxser.*
 
+MONOLITHIC POWER SYSTEM PMIC DRIVER
+M:	Saravanan Sekar <sravanhome@gmail.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/regulator/mpq7920.yaml
+F:	drivers/regulator/mpq7920.c
+F:	drivers/regulator/mpq7920.h
+
 MR800 AVERMEDIA USB FM RADIO DRIVER
 M:	Alexey Klimov <klimov.linux@gmail.com>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 74eb5af7295f..97bfdd47954f 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -194,6 +194,18 @@ config REGULATOR_BD70528
 	  This driver can also be built as a module. If so, the module
 	  will be called bd70528-regulator.
 
+config REGULATOR_BD71828
+	tristate "ROHM BD71828 Power Regulator"
+	depends on MFD_ROHM_BD71828
+	select REGULATOR_ROHM
+	help
+	  This driver supports voltage regulators on ROHM BD71828 PMIC.
+	  This will enable support for the software controllable buck
+	  and LDO regulators.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called bd71828-regulator.
+
 config REGULATOR_BD718XX
 	tristate "ROHM BD71837 Power Regulator"
 	depends on MFD_ROHM_BD718XX
@@ -600,6 +612,27 @@ config REGULATOR_MCP16502
 	  through the regulator interface. In addition it enables
 	  suspend-to-ram/standby transition.
 
+config REGULATOR_MP8859
+	tristate "MPS MP8859 regulator driver"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say y here to support the MP8859 voltage regulator. This driver
+	  supports basic operations (get/set voltage) through the regulator
+	  interface.
+	  Say M here if you want to include support for the regulator as a
+	  module. The module will be named "mp8859".
+
+config REGULATOR_MPQ7920
+	tristate "Monolithic MPQ7920 PMIC"
+	depends on I2C && OF
+	select REGMAP_I2C
+	help
+	  Say y here to support the MPQ7920 PMIC. This will enable supports
+	  the software controllable 4 buck and 5 LDO regulators.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6311
 	tristate "MediaTek MT6311 PMIC"
 	depends on I2C
@@ -1077,6 +1110,13 @@ config REGULATOR_VEXPRESS
 	  This driver provides support for voltage regulators available
 	  on the ARM Ltd's Versatile Express platform.
 
+config REGULATOR_VQMMC_IPQ4019
+	tristate "IPQ4019 VQMMC SD LDO regulator support"
+	depends on ARCH_QCOM
+	help
+	  This driver provides support for the VQMMC LDO I/0
+	  voltage regulator of the IPQ4019 SD/EMMC controller.
+
 config REGULATOR_WM831X
 	tristate "Wolfson Microelectronics WM831x PMIC regulators"
 	depends on MFD_WM831X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 2210ba56f9bd..07bc977c52b0 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
+obj-$(CONFIG_REGULATOR_BD71828) += bd71828-regulator.o
 obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
 obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
@@ -77,6 +78,8 @@ obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
 obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
 obj-$(CONFIG_REGULATOR_MC13XXX_CORE) +=  mc13xxx-regulator-core.o
 obj-$(CONFIG_REGULATOR_MCP16502) += mcp16502.o
+obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
+obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
@@ -132,6 +135,7 @@ obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o twl6030-regulator.o
 obj-$(CONFIG_REGULATOR_UNIPHIER) += uniphier-regulator.o
 obj-$(CONFIG_REGULATOR_VCTRL) += vctrl-regulator.o
 obj-$(CONFIG_REGULATOR_VEXPRESS) += vexpress-regulator.o
+obj-$(CONFIG_REGULATOR_VQMMC_IPQ4019) += vqmmc-ipq4019-regulator.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
 obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c
new file mode 100644
index 000000000000..b2fa17be4988
--- /dev/null
+++ b/drivers/regulator/bd71828-regulator.c
@@ -0,0 +1,807 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// Copyright (C) 2019 ROHM Semiconductors
+// bd71828-regulator.c ROHM BD71828GW-DS1 regulator driver
+//
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd71828.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+struct reg_init {
+	unsigned int reg;
+	unsigned int mask;
+	unsigned int val;
+};
+struct bd71828_regulator_data {
+	struct regulator_desc desc;
+	const struct rohm_dvs_config dvs;
+	const struct reg_init *reg_inits;
+	int reg_init_amnt;
+};
+
+static const struct reg_init buck1_inits[] = {
+	/*
+	 * DVS Buck voltages can be changed by register values or via GPIO.
+	 * Use register accesses by default.
+	 */
+	{
+		.reg = BD71828_REG_PS_CTRL_1,
+		.mask = BD71828_MASK_DVS_BUCK1_CTRL,
+		.val = BD71828_DVS_BUCK1_CTRL_I2C,
+	},
+};
+
+static const struct reg_init buck2_inits[] = {
+	{
+		.reg = BD71828_REG_PS_CTRL_1,
+		.mask = BD71828_MASK_DVS_BUCK2_CTRL,
+		.val = BD71828_DVS_BUCK2_CTRL_I2C,
+	},
+};
+
+static const struct reg_init buck6_inits[] = {
+	{
+		.reg = BD71828_REG_PS_CTRL_1,
+		.mask = BD71828_MASK_DVS_BUCK6_CTRL,
+		.val = BD71828_DVS_BUCK6_CTRL_I2C,
+	},
+};
+
+static const struct reg_init buck7_inits[] = {
+	{
+		.reg = BD71828_REG_PS_CTRL_1,
+		.mask = BD71828_MASK_DVS_BUCK7_CTRL,
+		.val = BD71828_DVS_BUCK7_CTRL_I2C,
+	},
+};
+
+static const struct regulator_linear_range bd71828_buck1267_volts[] = {
+	REGULATOR_LINEAR_RANGE(500000, 0x00, 0xef, 6250),
+	REGULATOR_LINEAR_RANGE(2000000, 0xf0, 0xff, 0),
+};
+
+static const struct regulator_linear_range bd71828_buck3_volts[] = {
+	REGULATOR_LINEAR_RANGE(1200000, 0x00, 0x0f, 50000),
+	REGULATOR_LINEAR_RANGE(2000000, 0x10, 0x1f, 0),
+};
+
+static const struct regulator_linear_range bd71828_buck4_volts[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0x00, 0x1f, 25000),
+	REGULATOR_LINEAR_RANGE(1800000, 0x20, 0x3f, 0),
+};
+
+static const struct regulator_linear_range bd71828_buck5_volts[] = {
+	REGULATOR_LINEAR_RANGE(2500000, 0x00, 0x0f, 50000),
+	REGULATOR_LINEAR_RANGE(3300000, 0x10, 0x1f, 0),
+};
+
+static const struct regulator_linear_range bd71828_ldo_volts[] = {
+	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x31, 50000),
+	REGULATOR_LINEAR_RANGE(3300000, 0x32, 0x3f, 0),
+};
+
+static int bd71828_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+	unsigned int val;
+
+	switch (ramp_delay) {
+	case 1 ... 2500:
+		val = 0;
+		break;
+	case 2501 ... 5000:
+		val = 1;
+		break;
+	case 5001 ... 10000:
+		val = 2;
+		break;
+	case 10001 ... 20000:
+		val = 3;
+		break;
+	default:
+		val = 3;
+		dev_err(&rdev->dev,
+			"ramp_delay: %d not supported, setting 20mV/uS",
+			 ramp_delay);
+	}
+
+	/*
+	 * On BD71828 the ramp delay level control reg is at offset +2 to
+	 * enable reg
+	 */
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg + 2,
+				  BD71828_MASK_RAMP_DELAY,
+				  val << (ffs(BD71828_MASK_RAMP_DELAY) - 1));
+}
+
+static int buck_set_hw_dvs_levels(struct device_node *np,
+				  const struct regulator_desc *desc,
+				  struct regulator_config *cfg)
+{
+	struct bd71828_regulator_data *data;
+
+	data = container_of(desc, struct bd71828_regulator_data, desc);
+
+	return rohm_regulator_set_dvs_levels(&data->dvs, np, desc, cfg->regmap);
+}
+
+static int ldo6_parse_dt(struct device_node *np,
+			 const struct regulator_desc *desc,
+			 struct regulator_config *cfg)
+{
+	int ret, i;
+	uint32_t uv = 0;
+	unsigned int en;
+	struct regmap *regmap = cfg->regmap;
+	static const char * const props[] = { "rohm,dvs-run-voltage",
+					      "rohm,dvs-idle-voltage",
+					      "rohm,dvs-suspend-voltage",
+					      "rohm,dvs-lpsr-voltage" };
+	unsigned int mask[] = { BD71828_MASK_RUN_EN, BD71828_MASK_IDLE_EN,
+			       BD71828_MASK_SUSP_EN, BD71828_MASK_LPSR_EN };
+
+	for (i = 0; i < ARRAY_SIZE(props); i++) {
+		ret = of_property_read_u32(np, props[i], &uv);
+		if (ret) {
+			if (ret != -EINVAL)
+				return ret;
+			continue;
+		}
+		if (uv)
+			en = 0xffffffff;
+		else
+			en = 0;
+
+		ret = regmap_update_bits(regmap, desc->enable_reg, mask[i], en);
+		if (ret)
+			return ret;
+	}
+	return 0;
+}
+
+static const struct regulator_ops bd71828_buck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops bd71828_dvs_buck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.set_ramp_delay = bd71828_set_ramp_delay,
+};
+
+static const struct regulator_ops bd71828_ldo_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static const struct regulator_ops bd71828_ldo6_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct bd71828_regulator_data bd71828_rdata[] = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("BUCK1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_BUCK1,
+			.ops = &bd71828_dvs_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_buck1267_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
+			.n_voltages = BD71828_BUCK1267_VOLTS,
+			.enable_reg = BD71828_REG_BUCK1_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_BUCK1_VOLT,
+			.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_BUCK1_VOLT,
+			.run_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_reg = BD71828_REG_BUCK1_IDLE_VOLT,
+			.idle_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_reg = BD71828_REG_BUCK1_SUSP_VOLT,
+			.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+			/*
+			 * LPSR voltage is same as SUSPEND voltage. Allow
+			 * setting it so that regulator can be set enabled at
+			 * LPSR state
+			 */
+			.lpsr_reg = BD71828_REG_BUCK1_SUSP_VOLT,
+			.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
+		},
+		.reg_inits = buck1_inits,
+		.reg_init_amnt = ARRAY_SIZE(buck1_inits),
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("BUCK2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_BUCK2,
+			.ops = &bd71828_dvs_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_buck1267_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
+			.n_voltages = BD71828_BUCK1267_VOLTS,
+			.enable_reg = BD71828_REG_BUCK2_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_BUCK2_VOLT,
+			.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_BUCK2_VOLT,
+			.run_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_reg = BD71828_REG_BUCK2_IDLE_VOLT,
+			.idle_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_reg = BD71828_REG_BUCK2_SUSP_VOLT,
+			.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+			.lpsr_reg = BD71828_REG_BUCK2_SUSP_VOLT,
+			.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
+		},
+		.reg_inits = buck2_inits,
+		.reg_init_amnt = ARRAY_SIZE(buck2_inits),
+	},
+	{
+		.desc = {
+			.name = "buck3",
+			.of_match = of_match_ptr("BUCK3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_BUCK3,
+			.ops = &bd71828_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_buck3_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_buck3_volts),
+			.n_voltages = BD71828_BUCK3_VOLTS,
+			.enable_reg = BD71828_REG_BUCK3_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_BUCK3_VOLT,
+			.vsel_mask = BD71828_MASK_BUCK3_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * BUCK3 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_BUCK3_VOLT,
+			.idle_reg = BD71828_REG_BUCK3_VOLT,
+			.suspend_reg = BD71828_REG_BUCK3_VOLT,
+			.lpsr_reg = BD71828_REG_BUCK3_VOLT,
+			.run_mask = BD71828_MASK_BUCK3_VOLT,
+			.idle_mask = BD71828_MASK_BUCK3_VOLT,
+			.suspend_mask = BD71828_MASK_BUCK3_VOLT,
+			.lpsr_mask = BD71828_MASK_BUCK3_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck4",
+			.of_match = of_match_ptr("BUCK4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_BUCK4,
+			.ops = &bd71828_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_buck4_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_buck4_volts),
+			.n_voltages = BD71828_BUCK4_VOLTS,
+			.enable_reg = BD71828_REG_BUCK4_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_BUCK4_VOLT,
+			.vsel_mask = BD71828_MASK_BUCK4_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * BUCK4 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_BUCK4_VOLT,
+			.idle_reg = BD71828_REG_BUCK4_VOLT,
+			.suspend_reg = BD71828_REG_BUCK4_VOLT,
+			.lpsr_reg = BD71828_REG_BUCK4_VOLT,
+			.run_mask = BD71828_MASK_BUCK4_VOLT,
+			.idle_mask = BD71828_MASK_BUCK4_VOLT,
+			.suspend_mask = BD71828_MASK_BUCK4_VOLT,
+			.lpsr_mask = BD71828_MASK_BUCK4_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck5",
+			.of_match = of_match_ptr("BUCK5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_BUCK5,
+			.ops = &bd71828_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_buck5_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_buck5_volts),
+			.n_voltages = BD71828_BUCK5_VOLTS,
+			.enable_reg = BD71828_REG_BUCK5_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_BUCK5_VOLT,
+			.vsel_mask = BD71828_MASK_BUCK5_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * BUCK5 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_BUCK5_VOLT,
+			.idle_reg = BD71828_REG_BUCK5_VOLT,
+			.suspend_reg = BD71828_REG_BUCK5_VOLT,
+			.lpsr_reg = BD71828_REG_BUCK5_VOLT,
+			.run_mask = BD71828_MASK_BUCK5_VOLT,
+			.idle_mask = BD71828_MASK_BUCK5_VOLT,
+			.suspend_mask = BD71828_MASK_BUCK5_VOLT,
+			.lpsr_mask = BD71828_MASK_BUCK5_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck6",
+			.of_match = of_match_ptr("BUCK6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_BUCK6,
+			.ops = &bd71828_dvs_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_buck1267_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
+			.n_voltages = BD71828_BUCK1267_VOLTS,
+			.enable_reg = BD71828_REG_BUCK6_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_BUCK6_VOLT,
+			.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_BUCK6_VOLT,
+			.run_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_reg = BD71828_REG_BUCK6_IDLE_VOLT,
+			.idle_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_reg = BD71828_REG_BUCK6_SUSP_VOLT,
+			.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+			.lpsr_reg = BD71828_REG_BUCK6_SUSP_VOLT,
+			.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
+		},
+		.reg_inits = buck6_inits,
+		.reg_init_amnt = ARRAY_SIZE(buck6_inits),
+	},
+	{
+		.desc = {
+			.name = "buck7",
+			.of_match = of_match_ptr("BUCK7"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_BUCK7,
+			.ops = &bd71828_dvs_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_buck1267_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_buck1267_volts),
+			.n_voltages = BD71828_BUCK1267_VOLTS,
+			.enable_reg = BD71828_REG_BUCK7_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_BUCK7_VOLT,
+			.vsel_mask = BD71828_MASK_BUCK1267_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_BUCK7_VOLT,
+			.run_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_reg = BD71828_REG_BUCK7_IDLE_VOLT,
+			.idle_mask = BD71828_MASK_BUCK1267_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_reg = BD71828_REG_BUCK7_SUSP_VOLT,
+			.suspend_mask = BD71828_MASK_BUCK1267_VOLT,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+			.lpsr_reg = BD71828_REG_BUCK7_SUSP_VOLT,
+			.lpsr_mask = BD71828_MASK_BUCK1267_VOLT,
+		},
+		.reg_inits = buck7_inits,
+		.reg_init_amnt = ARRAY_SIZE(buck7_inits),
+	},
+	{
+		.desc = {
+			.name = "ldo1",
+			.of_match = of_match_ptr("LDO1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_LDO1,
+			.ops = &bd71828_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_ldo_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
+			.n_voltages = BD71828_LDO_VOLTS,
+			.enable_reg = BD71828_REG_LDO1_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_LDO1_VOLT,
+			.vsel_mask = BD71828_MASK_LDO_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * LDO1 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_LDO1_VOLT,
+			.idle_reg = BD71828_REG_LDO1_VOLT,
+			.suspend_reg = BD71828_REG_LDO1_VOLT,
+			.lpsr_reg = BD71828_REG_LDO1_VOLT,
+			.run_mask = BD71828_MASK_LDO_VOLT,
+			.idle_mask = BD71828_MASK_LDO_VOLT,
+			.suspend_mask = BD71828_MASK_LDO_VOLT,
+			.lpsr_mask = BD71828_MASK_LDO_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+	}, {
+		.desc = {
+			.name = "ldo2",
+			.of_match = of_match_ptr("LDO2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_LDO2,
+			.ops = &bd71828_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_ldo_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
+			.n_voltages = BD71828_LDO_VOLTS,
+			.enable_reg = BD71828_REG_LDO2_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_LDO2_VOLT,
+			.vsel_mask = BD71828_MASK_LDO_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * LDO2 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_LDO2_VOLT,
+			.idle_reg = BD71828_REG_LDO2_VOLT,
+			.suspend_reg = BD71828_REG_LDO2_VOLT,
+			.lpsr_reg = BD71828_REG_LDO2_VOLT,
+			.run_mask = BD71828_MASK_LDO_VOLT,
+			.idle_mask = BD71828_MASK_LDO_VOLT,
+			.suspend_mask = BD71828_MASK_LDO_VOLT,
+			.lpsr_mask = BD71828_MASK_LDO_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+	}, {
+		.desc = {
+			.name = "ldo3",
+			.of_match = of_match_ptr("LDO3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_LDO3,
+			.ops = &bd71828_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_ldo_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
+			.n_voltages = BD71828_LDO_VOLTS,
+			.enable_reg = BD71828_REG_LDO3_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_LDO3_VOLT,
+			.vsel_mask = BD71828_MASK_LDO_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * LDO3 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_LDO3_VOLT,
+			.idle_reg = BD71828_REG_LDO3_VOLT,
+			.suspend_reg = BD71828_REG_LDO3_VOLT,
+			.lpsr_reg = BD71828_REG_LDO3_VOLT,
+			.run_mask = BD71828_MASK_LDO_VOLT,
+			.idle_mask = BD71828_MASK_LDO_VOLT,
+			.suspend_mask = BD71828_MASK_LDO_VOLT,
+			.lpsr_mask = BD71828_MASK_LDO_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+
+	}, {
+		.desc = {
+			.name = "ldo4",
+			.of_match = of_match_ptr("LDO4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_LDO4,
+			.ops = &bd71828_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_ldo_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
+			.n_voltages = BD71828_LDO_VOLTS,
+			.enable_reg = BD71828_REG_LDO4_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_LDO4_VOLT,
+			.vsel_mask = BD71828_MASK_LDO_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * LDO1 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_LDO4_VOLT,
+			.idle_reg = BD71828_REG_LDO4_VOLT,
+			.suspend_reg = BD71828_REG_LDO4_VOLT,
+			.lpsr_reg = BD71828_REG_LDO4_VOLT,
+			.run_mask = BD71828_MASK_LDO_VOLT,
+			.idle_mask = BD71828_MASK_LDO_VOLT,
+			.suspend_mask = BD71828_MASK_LDO_VOLT,
+			.lpsr_mask = BD71828_MASK_LDO_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+	}, {
+		.desc = {
+			.name = "ldo5",
+			.of_match = of_match_ptr("LDO5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_LDO5,
+			.ops = &bd71828_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_ldo_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
+			.n_voltages = BD71828_LDO_VOLTS,
+			.enable_reg = BD71828_REG_LDO5_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_LDO5_VOLT,
+			.vsel_mask = BD71828_MASK_LDO_VOLT,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+			.owner = THIS_MODULE,
+		},
+		/*
+		 * LDO5 is special. It can choose vsel settings to be configured
+		 * from 2 different registers (by GPIO).
+		 *
+		 * This driver supports only configuration where
+		 * BD71828_REG_LDO5_VOLT_L is used.
+		 */
+		.dvs = {
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_LDO5_VOLT,
+			.idle_reg = BD71828_REG_LDO5_VOLT,
+			.suspend_reg = BD71828_REG_LDO5_VOLT,
+			.lpsr_reg = BD71828_REG_LDO5_VOLT,
+			.run_mask = BD71828_MASK_LDO_VOLT,
+			.idle_mask = BD71828_MASK_LDO_VOLT,
+			.suspend_mask = BD71828_MASK_LDO_VOLT,
+			.lpsr_mask = BD71828_MASK_LDO_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+
+	}, {
+		.desc = {
+			.name = "ldo6",
+			.of_match = of_match_ptr("LDO6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_LDO6,
+			.ops = &bd71828_ldo6_ops,
+			.type = REGULATOR_VOLTAGE,
+			.fixed_uV = BD71828_LDO_6_VOLTAGE,
+			.n_voltages = 1,
+			.enable_reg = BD71828_REG_LDO6_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.owner = THIS_MODULE,
+			/*
+			 * LDO6 only supports enable/disable for all states.
+			 * Voltage for LDO6 is fixed.
+			 */
+			.of_parse_cb = ldo6_parse_dt,
+		},
+	}, {
+		.desc = {
+			/* SNVS LDO in data-sheet */
+			.name = "ldo7",
+			.of_match = of_match_ptr("LDO7"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD71828_LDO_SNVS,
+			.ops = &bd71828_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.linear_ranges = bd71828_ldo_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71828_ldo_volts),
+			.n_voltages = BD71828_LDO_VOLTS,
+			.enable_reg = BD71828_REG_LDO7_EN,
+			.enable_mask = BD71828_MASK_RUN_EN,
+			.vsel_reg = BD71828_REG_LDO7_VOLT,
+			.vsel_mask = BD71828_MASK_LDO_VOLT,
+			.owner = THIS_MODULE,
+			.of_parse_cb = buck_set_hw_dvs_levels,
+		},
+		.dvs = {
+			/*
+			 * LDO7 only supports single voltage for all states.
+			 * voltage can be individually enabled for each state
+			 * though => allow setting all states to support
+			 * enabling power rail on different states.
+			 */
+			.level_map = ROHM_DVS_LEVEL_RUN | ROHM_DVS_LEVEL_IDLE |
+				     ROHM_DVS_LEVEL_SUSPEND |
+				     ROHM_DVS_LEVEL_LPSR,
+			.run_reg = BD71828_REG_LDO7_VOLT,
+			.idle_reg = BD71828_REG_LDO7_VOLT,
+			.suspend_reg = BD71828_REG_LDO7_VOLT,
+			.lpsr_reg = BD71828_REG_LDO7_VOLT,
+			.run_mask = BD71828_MASK_LDO_VOLT,
+			.idle_mask = BD71828_MASK_LDO_VOLT,
+			.suspend_mask = BD71828_MASK_LDO_VOLT,
+			.lpsr_mask = BD71828_MASK_LDO_VOLT,
+			.idle_on_mask = BD71828_MASK_IDLE_EN,
+			.suspend_on_mask = BD71828_MASK_SUSP_EN,
+			.lpsr_on_mask = BD71828_MASK_LPSR_EN,
+		},
+
+	},
+};
+
+static int bd71828_probe(struct platform_device *pdev)
+{
+	struct rohm_regmap_dev *bd71828;
+	int i, j, ret;
+	struct regulator_config config = {
+		.dev = pdev->dev.parent,
+	};
+
+	bd71828 = dev_get_drvdata(pdev->dev.parent);
+	if (!bd71828) {
+		dev_err(&pdev->dev, "No MFD driver data\n");
+		return -EINVAL;
+	}
+
+	config.regmap = bd71828->regmap;
+
+	for (i = 0; i < ARRAY_SIZE(bd71828_rdata); i++) {
+		struct regulator_dev *rdev;
+		const struct bd71828_regulator_data *rd;
+
+		rd = &bd71828_rdata[i];
+		rdev = devm_regulator_register(&pdev->dev,
+					       &rd->desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev,
+				"failed to register %s regulator\n",
+				rd->desc.name);
+			return PTR_ERR(rdev);
+		}
+		for (j = 0; j < rd->reg_init_amnt; j++) {
+			ret = regmap_update_bits(bd71828->regmap,
+						 rd->reg_inits[j].reg,
+						 rd->reg_inits[j].mask,
+						 rd->reg_inits[j].val);
+			if (ret) {
+				dev_err(&pdev->dev,
+					"regulator %s init failed\n",
+					rd->desc.name);
+				return ret;
+			}
+		}
+	}
+	return 0;
+}
+
+static struct platform_driver bd71828_regulator = {
+	.driver = {
+		.name = "bd71828-pmic"
+	},
+	.probe = bd71828_probe,
+};
+
+module_platform_driver(bd71828_regulator);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD71828 voltage regulator driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd71828-pmic");
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index 13a43eee2e46..8f9b2d8eaf10 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -1142,28 +1142,14 @@ static const struct bd718xx_regulator_data bd71837_regulators[] = {
 	},
 };
 
-struct bd718xx_pmic_inits {
-	const struct bd718xx_regulator_data *r_datas;
-	unsigned int r_amount;
-};
-
 static int bd718xx_probe(struct platform_device *pdev)
 {
 	struct bd718xx *mfd;
 	struct regulator_config config = { 0 };
-	struct bd718xx_pmic_inits pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] = {
-		[ROHM_CHIP_TYPE_BD71837] = {
-			.r_datas = bd71837_regulators,
-			.r_amount = ARRAY_SIZE(bd71837_regulators),
-		},
-		[ROHM_CHIP_TYPE_BD71847] = {
-			.r_datas = bd71847_regulators,
-			.r_amount = ARRAY_SIZE(bd71847_regulators),
-		},
-	};
-
 	int i, j, err;
 	bool use_snvs;
+	const struct bd718xx_regulator_data *reg_data;
+	unsigned int num_reg_data;
 
 	mfd = dev_get_drvdata(pdev->dev.parent);
 	if (!mfd) {
@@ -1172,8 +1158,16 @@ static int bd718xx_probe(struct platform_device *pdev)
 		goto err;
 	}
 
-	if (mfd->chip.chip_type >= ROHM_CHIP_TYPE_AMOUNT ||
-	    !pmic_regulators[mfd->chip.chip_type].r_datas) {
+	switch (mfd->chip.chip_type) {
+	case ROHM_CHIP_TYPE_BD71837:
+		reg_data = bd71837_regulators;
+		num_reg_data = ARRAY_SIZE(bd71837_regulators);
+		break;
+	case ROHM_CHIP_TYPE_BD71847:
+		reg_data = bd71847_regulators;
+		num_reg_data = ARRAY_SIZE(bd71847_regulators);
+		break;
+	default:
 		dev_err(&pdev->dev, "Unsupported chip type\n");
 		err = -EINVAL;
 		goto err;
@@ -1215,13 +1209,13 @@ static int bd718xx_probe(struct platform_device *pdev)
 		}
 	}
 
-	for (i = 0; i < pmic_regulators[mfd->chip.chip_type].r_amount; i++) {
+	for (i = 0; i < num_reg_data; i++) {
 
 		const struct regulator_desc *desc;
 		struct regulator_dev *rdev;
 		const struct bd718xx_regulator_data *r;
 
-		r = &pmic_regulators[mfd->chip.chip_type].r_datas[i];
+		r = &reg_data[i];
 		desc = &r->desc;
 
 		config.dev = pdev->dev.parent;
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 03d79fee2987..d015d99cb59d 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -3470,6 +3470,7 @@ int regulator_set_voltage_rdev(struct regulator_dev *rdev, int min_uV,
 out:
 	return ret;
 }
+EXPORT_SYMBOL_GPL(regulator_set_voltage_rdev);
 
 static int regulator_limit_voltage_step(struct regulator_dev *rdev,
 					int *current_uV, int *min_uV)
@@ -4034,6 +4035,7 @@ int regulator_get_voltage_rdev(struct regulator_dev *rdev)
 		return ret;
 	return ret - rdev->constraints->uV_offset;
 }
+EXPORT_SYMBOL_GPL(regulator_get_voltage_rdev);
 
 /**
  * regulator_get_voltage - get regulator output voltage
diff --git a/drivers/regulator/da9210-regulator.c b/drivers/regulator/da9210-regulator.c
index f9448ed50e05..0cdeb6186529 100644
--- a/drivers/regulator/da9210-regulator.c
+++ b/drivers/regulator/da9210-regulator.c
@@ -131,8 +131,7 @@ static const struct of_device_id da9210_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, da9210_dt_ids);
 
-static int da9210_i2c_probe(struct i2c_client *i2c,
-			    const struct i2c_device_id *id)
+static int da9210_i2c_probe(struct i2c_client *i2c)
 {
 	struct da9210 *chip;
 	struct device *dev = &i2c->dev;
@@ -228,7 +227,7 @@ static struct i2c_driver da9210_regulator_driver = {
 		.name = "da9210",
 		.of_match_table = of_match_ptr(da9210_dt_ids),
 	},
-	.probe = da9210_i2c_probe,
+	.probe_new = da9210_i2c_probe,
 	.id_table = da9210_i2c_id,
 };
 
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index 523dc1b95826..2ea4362ffa5c 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -416,8 +416,7 @@ static int da9211_regulator_init(struct da9211 *chip)
 /*
  * I2C driver interface functions
  */
-static int da9211_i2c_probe(struct i2c_client *i2c,
-		const struct i2c_device_id *id)
+static int da9211_i2c_probe(struct i2c_client *i2c)
 {
 	struct da9211 *chip;
 	int error, ret;
@@ -526,7 +525,7 @@ static struct i2c_driver da9211_regulator_driver = {
 		.name = "da9211",
 		.of_match_table = of_match_ptr(da9211_dt_ids),
 	},
-	.probe = da9211_i2c_probe,
+	.probe_new = da9211_i2c_probe,
 	.id_table = da9211_i2c_id,
 };
 
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index ca3dc3f3bb29..bb16c465426e 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -13,6 +13,8 @@
 #include <linux/regulator/driver.h>
 #include <linux/module.h>
 
+#include "internal.h"
+
 /**
  * regulator_is_enabled_regmap - standard is_enabled() for regmap users
  *
@@ -881,3 +883,15 @@ void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
 		consumers[i].supply = supply_names[i];
 }
 EXPORT_SYMBOL_GPL(regulator_bulk_set_supply_names);
+
+/**
+ * regulator_is_equal - test whether two regulators are the same
+ *
+ * @reg1: first regulator to operate on
+ * @reg2: second regulator to operate on
+ */
+bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
+{
+	return reg1->rdev == reg2->rdev;
+}
+EXPORT_SYMBOL_GPL(regulator_is_equal);
diff --git a/drivers/regulator/isl9305.c b/drivers/regulator/isl9305.c
index 978f5e903cae..cfb765986d0d 100644
--- a/drivers/regulator/isl9305.c
+++ b/drivers/regulator/isl9305.c
@@ -137,8 +137,7 @@ static const struct regmap_config isl9305_regmap = {
 	.cache_type = REGCACHE_RBTREE,
 };
 
-static int isl9305_i2c_probe(struct i2c_client *i2c,
-			     const struct i2c_device_id *id)
+static int isl9305_i2c_probe(struct i2c_client *i2c)
 {
 	struct regulator_config config = { };
 	struct isl9305_pdata *pdata = i2c->dev.platform_data;
@@ -198,7 +197,7 @@ static struct i2c_driver isl9305_regulator_driver = {
 		.name = "isl9305",
 		.of_match_table	= of_match_ptr(isl9305_dt_ids),
 	},
-	.probe = isl9305_i2c_probe,
+	.probe_new = isl9305_i2c_probe,
 	.id_table = isl9305_i2c_id,
 };
 
diff --git a/drivers/regulator/lp3971.c b/drivers/regulator/lp3971.c
index bc96e65ef7c0..8be252f81b09 100644
--- a/drivers/regulator/lp3971.c
+++ b/drivers/regulator/lp3971.c
@@ -400,8 +400,7 @@ static int setup_regulators(struct lp3971 *lp3971,
 	return 0;
 }
 
-static int lp3971_i2c_probe(struct i2c_client *i2c,
-			    const struct i2c_device_id *id)
+static int lp3971_i2c_probe(struct i2c_client *i2c)
 {
 	struct lp3971 *lp3971;
 	struct lp3971_platform_data *pdata = dev_get_platdata(&i2c->dev);
@@ -449,7 +448,7 @@ static struct i2c_driver lp3971_i2c_driver = {
 	.driver = {
 		.name = "LP3971",
 	},
-	.probe    = lp3971_i2c_probe,
+	.probe_new = lp3971_i2c_probe,
 	.id_table = lp3971_i2c_id,
 };
 
diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c
index d934540eb8c4..e12e52c69e52 100644
--- a/drivers/regulator/ltc3676.c
+++ b/drivers/regulator/ltc3676.c
@@ -301,8 +301,7 @@ static irqreturn_t ltc3676_isr(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int ltc3676_regulator_probe(struct i2c_client *client,
-				    const struct i2c_device_id *id)
+static int ltc3676_regulator_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct regulator_init_data *init_data = dev_get_platdata(dev);
@@ -380,7 +379,7 @@ static struct i2c_driver ltc3676_driver = {
 		.name = DRIVER_NAME,
 		.of_match_table = of_match_ptr(ltc3676_of_match),
 	},
-	.probe = ltc3676_regulator_probe,
+	.probe_new = ltc3676_regulator_probe,
 	.id_table = ltc3676_i2c_id,
 };
 module_i2c_driver(ltc3676_driver);
diff --git a/drivers/regulator/mp8859.c b/drivers/regulator/mp8859.c
new file mode 100644
index 000000000000..1d26b506ee5b
--- /dev/null
+++ b/drivers/regulator/mp8859.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2019 five technologies GmbH
+// Author: Markus Reichl <m.reichl@fivetechno.de>
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+#include <linux/regulator/driver.h>
+#include <linux/regmap.h>
+
+
+#define VOL_MIN_IDX			0x00
+#define VOL_MAX_IDX			0x7ff
+
+/* Register definitions */
+#define MP8859_VOUT_L_REG		0    //3 lo Bits
+#define MP8859_VOUT_H_REG		1    //8 hi Bits
+#define MP8859_VOUT_GO_REG		2
+#define MP8859_IOUT_LIM_REG		3
+#define MP8859_CTL1_REG			4
+#define MP8859_CTL2_REG			5
+#define MP8859_RESERVED1_REG		6
+#define MP8859_RESERVED2_REG		7
+#define MP8859_RESERVED3_REG		8
+#define MP8859_STATUS_REG		9
+#define MP8859_INTERRUPT_REG		0x0A
+#define MP8859_MASK_REG			0x0B
+#define MP8859_ID1_REG			0x0C
+#define MP8859_MFR_ID_REG		0x27
+#define MP8859_DEV_ID_REG		0x28
+#define MP8859_IC_REV_REG		0x29
+
+#define MP8859_MAX_REG			0x29
+
+#define MP8859_GO_BIT			0x01
+
+
+static int mp8859_set_voltage_sel(struct regulator_dev *rdev, unsigned int sel)
+{
+	int ret;
+
+	ret = regmap_write(rdev->regmap, MP8859_VOUT_L_REG, sel & 0x7);
+
+	if (ret)
+		return ret;
+	ret = regmap_write(rdev->regmap, MP8859_VOUT_H_REG, sel >> 3);
+
+	if (ret)
+		return ret;
+	ret = regmap_update_bits(rdev->regmap, MP8859_VOUT_GO_REG,
+					MP8859_GO_BIT, 1);
+	return ret;
+}
+
+static int mp8859_get_voltage_sel(struct regulator_dev *rdev)
+{
+	unsigned int val_tmp;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, MP8859_VOUT_H_REG, &val_tmp);
+
+	if (ret)
+		return ret;
+	val = val_tmp << 3;
+
+	ret = regmap_read(rdev->regmap, MP8859_VOUT_L_REG, &val_tmp);
+
+	if (ret)
+		return ret;
+	val |= val_tmp & 0x07;
+	return val;
+}
+
+static const struct regulator_linear_range mp8859_dcdc_ranges[] = {
+	REGULATOR_LINEAR_RANGE(0, VOL_MIN_IDX, VOL_MAX_IDX, 10000),
+};
+
+static const struct regmap_config mp8859_regmap = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = MP8859_MAX_REG,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static const struct regulator_ops mp8859_ops = {
+	.set_voltage_sel = mp8859_set_voltage_sel,
+	.get_voltage_sel = mp8859_get_voltage_sel,
+	.list_voltage = regulator_list_voltage_linear_range,
+};
+
+static const struct regulator_desc mp8859_regulators[] = {
+	{
+		.id = 0,
+		.type = REGULATOR_VOLTAGE,
+		.name = "mp8859_dcdc",
+		.of_match = of_match_ptr("mp8859_dcdc"),
+		.n_voltages = VOL_MAX_IDX + 1,
+		.linear_ranges = mp8859_dcdc_ranges,
+		.n_linear_ranges = 1,
+		.ops = &mp8859_ops,
+		.owner = THIS_MODULE,
+	},
+};
+
+static int mp8859_i2c_probe(struct i2c_client *i2c)
+{
+	int ret;
+	struct regulator_config config = {.dev = &i2c->dev};
+	struct regmap *regmap = devm_regmap_init_i2c(i2c, &mp8859_regmap);
+	struct regulator_dev *rdev;
+
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+	rdev = devm_regulator_register(&i2c->dev, &mp8859_regulators[0],
+					&config);
+
+	if (IS_ERR(rdev)) {
+		ret = PTR_ERR(rdev);
+		dev_err(&i2c->dev, "failed to register %s: %d\n",
+			mp8859_regulators[0].name, ret);
+		return ret;
+	}
+	return 0;
+}
+
+static const struct of_device_id mp8859_dt_id[] = {
+	{.compatible =  "mps,mp8859"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mp8859_dt_id);
+
+static const struct i2c_device_id mp8859_i2c_id[] = {
+	{ "mp8859", },
+	{  },
+};
+MODULE_DEVICE_TABLE(i2c, mp8859_i2c_id);
+
+static struct i2c_driver mp8859_regulator_driver = {
+	.driver = {
+		.name = "mp8859",
+		.of_match_table = of_match_ptr(mp8859_dt_id),
+	},
+	.probe_new = mp8859_i2c_probe,
+	.id_table = mp8859_i2c_id,
+};
+
+module_i2c_driver(mp8859_regulator_driver);
+
+MODULE_DESCRIPTION("Monolithic Power Systems MP8859 voltage regulator driver");
+MODULE_AUTHOR("Markus Reichl <m.reichl@fivetechno.de>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/mpq7920.c b/drivers/regulator/mpq7920.c
new file mode 100644
index 000000000000..54c862edf571
--- /dev/null
+++ b/drivers/regulator/mpq7920.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// mpq7920.c  - regulator driver for mps mpq7920
+//
+// Copyright 2019 Monolithic Power Systems, Inc
+//
+// Author: Saravanan Sekar <sravanhome@gmail.com>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include "mpq7920.h"
+
+#define MPQ7920_BUCK_VOLT_RANGE \
+	((MPQ7920_VOLT_MAX - MPQ7920_BUCK_VOLT_MIN)/MPQ7920_VOLT_STEP + 1)
+#define MPQ7920_LDO_VOLT_RANGE \
+	((MPQ7920_VOLT_MAX - MPQ7920_LDO_VOLT_MIN)/MPQ7920_VOLT_STEP + 1)
+
+#define MPQ7920BUCK(_name, _id, _ilim)					\
+	[MPQ7920_BUCK ## _id] = {					\
+		.id = MPQ7920_BUCK ## _id,				\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.of_parse_cb = mpq7920_parse_cb,			\
+		.ops = &mpq7920_buck_ops,				\
+		.min_uV = MPQ7920_BUCK_VOLT_MIN,			\
+		.uV_step = MPQ7920_VOLT_STEP,				\
+		.n_voltages = MPQ7920_BUCK_VOLT_RANGE,			\
+		.curr_table = _ilim,					\
+		.n_current_limits = ARRAY_SIZE(_ilim),			\
+		.csel_reg = MPQ7920_BUCK ##_id## _REG_C,		\
+		.csel_mask = MPQ7920_MASK_BUCK_ILIM,			\
+		.enable_reg = MPQ7920_REG_REGULATOR_EN,			\
+		.enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET -	\
+					 MPQ7920_BUCK ## _id),		\
+		.vsel_reg = MPQ7920_BUCK ##_id## _REG_A,		\
+		.vsel_mask = MPQ7920_MASK_VREF,				\
+		.active_discharge_on	= MPQ7920_DISCHARGE_ON,		\
+		.active_discharge_reg	= MPQ7920_BUCK ##_id## _REG_B,	\
+		.active_discharge_mask	= MPQ7920_MASK_DISCHARGE,	\
+		.soft_start_reg		= MPQ7920_BUCK ##_id## _REG_C,	\
+		.soft_start_mask	= MPQ7920_MASK_SOFTSTART,	\
+		.owner			= THIS_MODULE,			\
+	}
+
+#define MPQ7920LDO(_name, _id, _ops, _ilim, _ilim_sz, _creg, _cmask)	\
+	[MPQ7920_LDO ## _id] = {					\
+		.id = MPQ7920_LDO ## _id,				\
+		.name = _name,						\
+		.of_match = _name,					\
+		.regulators_node = "regulators",			\
+		.ops = _ops,						\
+		.min_uV = MPQ7920_LDO_VOLT_MIN,				\
+		.uV_step = MPQ7920_VOLT_STEP,				\
+		.n_voltages = MPQ7920_LDO_VOLT_RANGE,			\
+		.vsel_reg = MPQ7920_LDO ##_id## _REG_A,			\
+		.vsel_mask = MPQ7920_MASK_VREF,				\
+		.curr_table = _ilim,					\
+		.n_current_limits = _ilim_sz,				\
+		.csel_reg = _creg,					\
+		.csel_mask = _cmask,					\
+		.enable_reg = (_id == 1) ? 0 : MPQ7920_REG_REGULATOR_EN,\
+		.enable_mask = BIT(MPQ7920_REGULATOR_EN_OFFSET -	\
+					MPQ7920_LDO ##_id + 1),		\
+		.active_discharge_on	= MPQ7920_DISCHARGE_ON,		\
+		.active_discharge_mask	= MPQ7920_MASK_DISCHARGE,	\
+		.active_discharge_reg	= MPQ7920_LDO ##_id## _REG_B,	\
+		.type			= REGULATOR_VOLTAGE,		\
+		.owner			= THIS_MODULE,			\
+	}
+
+enum mpq7920_regulators {
+	MPQ7920_BUCK1,
+	MPQ7920_BUCK2,
+	MPQ7920_BUCK3,
+	MPQ7920_BUCK4,
+	MPQ7920_LDO1, /* LDORTC */
+	MPQ7920_LDO2,
+	MPQ7920_LDO3,
+	MPQ7920_LDO4,
+	MPQ7920_LDO5,
+	MPQ7920_MAX_REGULATORS,
+};
+
+struct mpq7920_regulator_info {
+	struct regmap *regmap;
+	struct regulator_desc *rdesc;
+};
+
+static const struct regmap_config mpq7920_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x25,
+};
+
+/* Current limits array (in uA)
+ * ILIM1 & ILIM3
+ */
+static const unsigned int mpq7920_I_limits1[] = {
+	4600000, 6600000, 7600000, 9300000
+};
+
+/* ILIM2 & ILIM4 */
+static const unsigned int mpq7920_I_limits2[] = {
+	2700000, 3900000, 5100000, 6100000
+};
+
+/* LDO4 & LDO5 */
+static const unsigned int mpq7920_I_limits3[] = {
+	300000, 700000
+};
+
+static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay);
+static int mpq7920_parse_cb(struct device_node *np,
+				const struct regulator_desc *rdesc,
+				struct regulator_config *config);
+
+/* RTCLDO not controllable, always ON */
+static const struct regulator_ops mpq7920_ldortc_ops = {
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops mpq7920_ldo_wo_current_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_active_discharge	= regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_ops mpq7920_ldo_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_active_discharge	= regulator_set_active_discharge_regmap,
+	.get_current_limit	= regulator_get_current_limit_regmap,
+	.set_current_limit	= regulator_set_current_limit_regmap,
+};
+
+static const struct regulator_ops mpq7920_buck_ops = {
+	.enable			= regulator_enable_regmap,
+	.disable		= regulator_disable_regmap,
+	.is_enabled		= regulator_is_enabled_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.set_active_discharge	= regulator_set_active_discharge_regmap,
+	.set_soft_start		= regulator_set_soft_start_regmap,
+	.set_ramp_delay		= mpq7920_set_ramp_delay,
+};
+
+static struct regulator_desc mpq7920_regulators_desc[MPQ7920_MAX_REGULATORS] = {
+	MPQ7920BUCK("buck1", 1, mpq7920_I_limits1),
+	MPQ7920BUCK("buck2", 2, mpq7920_I_limits2),
+	MPQ7920BUCK("buck3", 3, mpq7920_I_limits1),
+	MPQ7920BUCK("buck4", 4, mpq7920_I_limits2),
+	MPQ7920LDO("ldortc", 1, &mpq7920_ldortc_ops, NULL, 0, 0, 0),
+	MPQ7920LDO("ldo2", 2, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0),
+	MPQ7920LDO("ldo3", 3, &mpq7920_ldo_wo_current_ops, NULL, 0, 0, 0),
+	MPQ7920LDO("ldo4", 4, &mpq7920_ldo_ops, mpq7920_I_limits3,
+			ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO4_REG_B,
+			MPQ7920_MASK_LDO_ILIM),
+	MPQ7920LDO("ldo5", 5, &mpq7920_ldo_ops, mpq7920_I_limits3,
+			ARRAY_SIZE(mpq7920_I_limits3), MPQ7920_LDO5_REG_B,
+			MPQ7920_MASK_LDO_ILIM),
+};
+
+/*
+ * DVS ramp rate BUCK1 to BUCK4
+ * 00-01: Reserved
+ * 10: 8mV/us
+ * 11: 4mV/us
+ */
+static int mpq7920_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
+{
+	unsigned int ramp_val;
+
+	if (ramp_delay > 8000 || ramp_delay < 0)
+		return -EINVAL;
+
+	if (ramp_delay <= 4000)
+		ramp_val = 3;
+	else
+		ramp_val = 2;
+
+	return regmap_update_bits(rdev->regmap, MPQ7920_REG_CTL0,
+				  MPQ7920_MASK_DVS_SLEWRATE, ramp_val << 6);
+}
+
+static int mpq7920_parse_cb(struct device_node *np,
+				const struct regulator_desc *desc,
+				struct regulator_config *config)
+{
+	uint8_t val;
+	int ret;
+	struct mpq7920_regulator_info *info = config->driver_data;
+	struct regulator_desc *rdesc = &info->rdesc[desc->id];
+
+	if (of_property_read_bool(np, "mps,buck-ovp-disable")) {
+		regmap_update_bits(config->regmap,
+				MPQ7920_BUCK1_REG_B + (rdesc->id * 4),
+				MPQ7920_MASK_OVP, MPQ7920_OVP_DISABLE);
+	}
+
+	ret = of_property_read_u8(np, "mps,buck-phase-delay", &val);
+	if (!ret) {
+		regmap_update_bits(config->regmap,
+				MPQ7920_BUCK1_REG_C + (rdesc->id * 4),
+				MPQ7920_MASK_BUCK_PHASE_DEALY,
+				(val & 3) << 4);
+	}
+
+	ret = of_property_read_u8(np, "mps,buck-softstart", &val);
+	if (!ret)
+		rdesc->soft_start_val_on = (val & 3) << 2;
+
+	return 0;
+}
+
+static void mpq7920_parse_dt(struct device *dev,
+		 struct mpq7920_regulator_info *info)
+{
+	int ret;
+	struct device_node *np = dev->of_node;
+	uint8_t freq;
+
+	np = of_get_child_by_name(np, "regulators");
+	if (!np) {
+		dev_err(dev, "missing 'regulators' subnode in DT\n");
+		return;
+	}
+
+	ret = of_property_read_u8(np, "mps,switch-freq", &freq);
+	if (!ret) {
+		regmap_update_bits(info->regmap, MPQ7920_REG_CTL0,
+					MPQ7920_MASK_SWITCH_FREQ,
+					(freq & 3) << 4);
+	}
+
+	of_node_put(np);
+}
+
+static int mpq7920_i2c_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct mpq7920_regulator_info *info;
+	struct regulator_config config = { NULL, };
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	int i;
+
+	info = devm_kzalloc(dev, sizeof(struct mpq7920_regulator_info),
+				GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	info->rdesc = mpq7920_regulators_desc;
+	regmap = devm_regmap_init_i2c(client, &mpq7920_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "Failed to allocate regmap!\n");
+		return PTR_ERR(regmap);
+	}
+
+	i2c_set_clientdata(client, info);
+	info->regmap = regmap;
+	if (client->dev.of_node)
+		mpq7920_parse_dt(&client->dev, info);
+
+	config.dev = dev;
+	config.regmap = regmap;
+	config.driver_data = info;
+
+	for (i = 0; i < MPQ7920_MAX_REGULATORS; i++) {
+		rdev = devm_regulator_register(dev,
+					       &mpq7920_regulators_desc[i],
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "Failed to register regulator!\n");
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct of_device_id mpq7920_of_match[] = {
+	{ .compatible = "mps,mpq7920"},
+	{},
+};
+MODULE_DEVICE_TABLE(of, mpq7920_of_match);
+
+static const struct i2c_device_id mpq7920_id[] = {
+	{ "mpq7920", },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, mpq7920_id);
+
+static struct i2c_driver mpq7920_regulator_driver = {
+	.driver = {
+		.name = "mpq7920",
+		.of_match_table = of_match_ptr(mpq7920_of_match),
+	},
+	.probe_new = mpq7920_i2c_probe,
+	.id_table = mpq7920_id,
+};
+module_i2c_driver(mpq7920_regulator_driver);
+
+MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
+MODULE_DESCRIPTION("MPQ7920 PMIC regulator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/mpq7920.h b/drivers/regulator/mpq7920.h
new file mode 100644
index 000000000000..489924655a96
--- /dev/null
+++ b/drivers/regulator/mpq7920.h
@@ -0,0 +1,69 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * mpq7920.h  -  Regulator definitions for mpq7920
+ *
+ * Copyright 2019 Monolithic Power Systems, Inc
+ *
+ */
+
+#ifndef __MPQ7920_H__
+#define __MPQ7920_H__
+
+#define MPQ7920_REG_CTL0		0x00
+#define MPQ7920_REG_CTL1		0x01
+#define MPQ7920_REG_CTL2		0x02
+#define MPQ7920_BUCK1_REG_A		0x03
+#define MPQ7920_BUCK1_REG_B		0x04
+#define MPQ7920_BUCK1_REG_C		0x05
+#define MPQ7920_BUCK1_REG_D		0x06
+#define MPQ7920_BUCK2_REG_A		0x07
+#define MPQ7920_BUCK2_REG_B		0x08
+#define MPQ7920_BUCK2_REG_C		0x09
+#define MPQ7920_BUCK2_REG_D		0x0a
+#define MPQ7920_BUCK3_REG_A		0x0b
+#define MPQ7920_BUCK3_REG_B		0x0c
+#define MPQ7920_BUCK3_REG_C		0x0d
+#define MPQ7920_BUCK3_REG_D		0x0e
+#define MPQ7920_BUCK4_REG_A		0x0f
+#define MPQ7920_BUCK4_REG_B		0x10
+#define MPQ7920_BUCK4_REG_C		0x11
+#define MPQ7920_BUCK4_REG_D		0x12
+#define MPQ7920_LDO1_REG_A		0x13
+#define MPQ7920_LDO1_REG_B		0x0
+#define MPQ7920_LDO2_REG_A		0x14
+#define MPQ7920_LDO2_REG_B		0x15
+#define MPQ7920_LDO2_REG_C		0x16
+#define MPQ7920_LDO3_REG_A		0x17
+#define MPQ7920_LDO3_REG_B		0x18
+#define MPQ7920_LDO3_REG_C		0x19
+#define MPQ7920_LDO4_REG_A		0x1a
+#define MPQ7920_LDO4_REG_B		0x1b
+#define MPQ7920_LDO4_REG_C		0x1c
+#define MPQ7920_LDO5_REG_A		0x1d
+#define MPQ7920_LDO5_REG_B		0x1e
+#define MPQ7920_LDO5_REG_C		0x1f
+#define MPQ7920_REG_MODE		0x20
+#define MPQ7920_REG_REGULATOR_EN	0x22
+
+#define MPQ7920_MASK_VREF		0x7f
+#define MPQ7920_MASK_BUCK_ILIM		0xc0
+#define MPQ7920_MASK_LDO_ILIM		BIT(6)
+#define MPQ7920_MASK_DISCHARGE		BIT(5)
+#define MPQ7920_MASK_MODE		0xc0
+#define MPQ7920_MASK_SOFTSTART		0x0c
+#define MPQ7920_MASK_SWITCH_FREQ	0x30
+#define MPQ7920_MASK_BUCK_PHASE_DEALY	0x30
+#define MPQ7920_MASK_DVS_SLEWRATE	0xc0
+#define MPQ7920_MASK_OVP		0x40
+#define MPQ7920_OVP_DISABLE		~(0x40)
+#define MPQ7920_DISCHARGE_ON		BIT(5)
+
+#define MPQ7920_REGULATOR_EN_OFFSET	7
+
+/* values in mV */
+#define MPQ7920_BUCK_VOLT_MIN		400000
+#define MPQ7920_LDO_VOLT_MIN		650000
+#define MPQ7920_VOLT_MAX		3587500
+#define MPQ7920_VOLT_STEP		12500
+
+#endif /* __MPQ7920_H__ */
diff --git a/drivers/regulator/mt6311-regulator.c b/drivers/regulator/mt6311-regulator.c
index af95449d3590..69e6af3cd505 100644
--- a/drivers/regulator/mt6311-regulator.c
+++ b/drivers/regulator/mt6311-regulator.c
@@ -85,8 +85,7 @@ static const struct regulator_desc mt6311_regulators[] = {
 /*
  * I2C driver interface functions
  */
-static int mt6311_i2c_probe(struct i2c_client *i2c,
-		const struct i2c_device_id *id)
+static int mt6311_i2c_probe(struct i2c_client *i2c)
 {
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
@@ -154,7 +153,7 @@ static struct i2c_driver mt6311_regulator_driver = {
 		.name = "mt6311",
 		.of_match_table = of_match_ptr(mt6311_dt_ids),
 	},
-	.probe = mt6311_i2c_probe,
+	.probe_new = mt6311_i2c_probe,
 	.id_table = mt6311_i2c_id,
 };
 
diff --git a/drivers/regulator/pv88060-regulator.c b/drivers/regulator/pv88060-regulator.c
index 3d3415839ba2..787ced918372 100644
--- a/drivers/regulator/pv88060-regulator.c
+++ b/drivers/regulator/pv88060-regulator.c
@@ -279,8 +279,7 @@ error_i2c:
 /*
  * I2C driver interface functions
  */
-static int pv88060_i2c_probe(struct i2c_client *i2c,
-		const struct i2c_device_id *id)
+static int pv88060_i2c_probe(struct i2c_client *i2c)
 {
 	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
 	struct pv88060 *chip;
@@ -385,7 +384,7 @@ static struct i2c_driver pv88060_regulator_driver = {
 		.name = "pv88060",
 		.of_match_table = of_match_ptr(pv88060_dt_ids),
 	},
-	.probe = pv88060_i2c_probe,
+	.probe_new = pv88060_i2c_probe,
 	.id_table = pv88060_i2c_id,
 };
 
diff --git a/drivers/regulator/pv88090-regulator.c b/drivers/regulator/pv88090-regulator.c
index b1d0d97ae935..784729ec2182 100644
--- a/drivers/regulator/pv88090-regulator.c
+++ b/drivers/regulator/pv88090-regulator.c
@@ -272,8 +272,7 @@ error_i2c:
 /*
  * I2C driver interface functions
  */
-static int pv88090_i2c_probe(struct i2c_client *i2c,
-		const struct i2c_device_id *id)
+static int pv88090_i2c_probe(struct i2c_client *i2c)
 {
 	struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
 	struct pv88090 *chip;
@@ -406,7 +405,7 @@ static struct i2c_driver pv88090_regulator_driver = {
 		.name = "pv88090",
 		.of_match_table = of_match_ptr(pv88090_dt_ids),
 	},
-	.probe = pv88090_i2c_probe,
+	.probe_new = pv88090_i2c_probe,
 	.id_table = pv88090_i2c_id,
 };
 
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 5b4003226484..31f79fda3238 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -1282,7 +1282,7 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev,
 		}
 
 		if (!pdata->dvs_gpio[i]) {
-			dev_warn(dev, "there is no dvs%d gpio\n", i);
+			dev_info(dev, "there is no dvs%d gpio\n", i);
 			continue;
 		}
 
diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c
index 51f7e8b74d8c..115f59530852 100644
--- a/drivers/regulator/s2mpa01.c
+++ b/drivers/regulator/s2mpa01.c
@@ -390,5 +390,5 @@ module_platform_driver(s2mpa01_pmic_driver);
 /* Module information */
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
 MODULE_AUTHOR("Sachin Kamat <sachin.kamat@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S2MPA01 Regulator Driver");
+MODULE_DESCRIPTION("Samsung S2MPA01 Regulator Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 4f2dc5ebffdc..23d288278957 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -1265,5 +1265,5 @@ module_platform_driver(s2mps11_pmic_driver);
 
 /* Module information */
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
+MODULE_DESCRIPTION("Samsung S2MPS11/S2MPS14/S2MPS15/S2MPU02 Regulator Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 12d6b8d2e97e..4abd3ed31f60 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -1015,5 +1015,5 @@ module_exit(s5m8767_pmic_exit);
 
 /* Module information */
 MODULE_AUTHOR("Sangbeom Kim <sbkim73@samsung.com>");
-MODULE_DESCRIPTION("SAMSUNG S5M8767 Regulator Driver");
+MODULE_DESCRIPTION("Samsung S5M8767 Regulator Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/slg51000-regulator.c b/drivers/regulator/slg51000-regulator.c
index bf1a3508ebc4..44e4cecbf6de 100644
--- a/drivers/regulator/slg51000-regulator.c
+++ b/drivers/regulator/slg51000-regulator.c
@@ -439,8 +439,7 @@ static void slg51000_clear_fault_log(struct slg51000 *chip)
 		dev_dbg(chip->dev, "Fault log: FLT_POR\n");
 }
 
-static int slg51000_i2c_probe(struct i2c_client *client,
-			      const struct i2c_device_id *id)
+static int slg51000_i2c_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct slg51000 *chip;
@@ -509,7 +508,7 @@ static struct i2c_driver slg51000_regulator_driver = {
 	.driver = {
 		.name = "slg51000-regulator",
 	},
-	.probe = slg51000_i2c_probe,
+	.probe_new = slg51000_i2c_probe,
 	.id_table = slg51000_i2c_id,
 };
 
diff --git a/drivers/regulator/sy8106a-regulator.c b/drivers/regulator/sy8106a-regulator.c
index 42e03b2c10a0..2222e739e62b 100644
--- a/drivers/regulator/sy8106a-regulator.c
+++ b/drivers/regulator/sy8106a-regulator.c
@@ -61,8 +61,7 @@ static const struct regulator_desc sy8106a_reg = {
 /*
  * I2C driver interface functions
  */
-static int sy8106a_i2c_probe(struct i2c_client *i2c,
-			    const struct i2c_device_id *id)
+static int sy8106a_i2c_probe(struct i2c_client *i2c)
 {
 	struct device *dev = &i2c->dev;
 	struct regulator_dev *rdev;
@@ -141,7 +140,7 @@ static struct i2c_driver sy8106a_regulator_driver = {
 		.name = "sy8106a",
 		.of_match_table	= of_match_ptr(sy8106a_i2c_of_match),
 	},
-	.probe = sy8106a_i2c_probe,
+	.probe_new = sy8106a_i2c_probe,
 	.id_table = sy8106a_i2c_id,
 };
 
diff --git a/drivers/regulator/sy8824x.c b/drivers/regulator/sy8824x.c
index 92adb4f3ee19..62d243f3b904 100644
--- a/drivers/regulator/sy8824x.c
+++ b/drivers/regulator/sy8824x.c
@@ -112,8 +112,7 @@ static const struct regmap_config sy8824_regmap_config = {
 	.val_bits = 8,
 };
 
-static int sy8824_i2c_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
+static int sy8824_i2c_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct device_node *np = dev->of_node;
@@ -222,7 +221,7 @@ static struct i2c_driver sy8824_regulator_driver = {
 		.name = "sy8824-regulator",
 		.of_match_table = of_match_ptr(sy8824_dt_ids),
 	},
-	.probe = sy8824_i2c_probe,
+	.probe_new = sy8824_i2c_probe,
 	.id_table = sy8824_id,
 };
 module_i2c_driver(sy8824_regulator_driver);
diff --git a/drivers/regulator/tps65132-regulator.c b/drivers/regulator/tps65132-regulator.c
index 7b0e38f8d627..0edc83089ba2 100644
--- a/drivers/regulator/tps65132-regulator.c
+++ b/drivers/regulator/tps65132-regulator.c
@@ -220,8 +220,7 @@ static const struct regmap_config tps65132_regmap_config = {
 	.wr_table	= &tps65132_no_reg_table,
 };
 
-static int tps65132_probe(struct i2c_client *client,
-			  const struct i2c_device_id *client_id)
+static int tps65132_probe(struct i2c_client *client)
 {
 	struct device *dev = &client->dev;
 	struct tps65132_regulator *tps;
@@ -272,7 +271,7 @@ static struct i2c_driver tps65132_i2c_driver = {
 	.driver = {
 		.name = "tps65132",
 	},
-	.probe = tps65132_probe,
+	.probe_new = tps65132_probe,
 	.id_table = tps65132_id,
 };
 
diff --git a/drivers/regulator/vctrl-regulator.c b/drivers/regulator/vctrl-regulator.c
index 9a9ee8188109..cbadb1c99679 100644
--- a/drivers/regulator/vctrl-regulator.c
+++ b/drivers/regulator/vctrl-regulator.c
@@ -11,10 +11,13 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/regulator/coupler.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/sort.h>
 
+#include "internal.h"
+
 struct vctrl_voltage_range {
 	int min_uV;
 	int max_uV;
@@ -79,7 +82,7 @@ static int vctrl_calc_output_voltage(struct vctrl_data *vctrl, int ctrl_uV)
 static int vctrl_get_voltage(struct regulator_dev *rdev)
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
-	int ctrl_uV = regulator_get_voltage(vctrl->ctrl_reg);
+	int ctrl_uV = regulator_get_voltage_rdev(vctrl->ctrl_reg->rdev);
 
 	return vctrl_calc_output_voltage(vctrl, ctrl_uV);
 }
@@ -90,16 +93,16 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 {
 	struct vctrl_data *vctrl = rdev_get_drvdata(rdev);
 	struct regulator *ctrl_reg = vctrl->ctrl_reg;
-	int orig_ctrl_uV = regulator_get_voltage(ctrl_reg);
+	int orig_ctrl_uV = regulator_get_voltage_rdev(ctrl_reg->rdev);
 	int uV = vctrl_calc_output_voltage(vctrl, orig_ctrl_uV);
 	int ret;
 
 	if (req_min_uV >= uV || !vctrl->ovp_threshold)
 		/* voltage rising or no OVP */
-		return regulator_set_voltage(
-			ctrl_reg,
+		return regulator_set_voltage_rdev(ctrl_reg->rdev,
 			vctrl_calc_ctrl_voltage(vctrl, req_min_uV),
-			vctrl_calc_ctrl_voltage(vctrl, req_max_uV));
+			vctrl_calc_ctrl_voltage(vctrl, req_max_uV),
+			PM_SUSPEND_ON);
 
 	while (uV > req_min_uV) {
 		int max_drop_uV = (uV * vctrl->ovp_threshold) / 100;
@@ -114,9 +117,10 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 		next_uV = max_t(int, req_min_uV, uV - max_drop_uV);
 		next_ctrl_uV = vctrl_calc_ctrl_voltage(vctrl, next_uV);
 
-		ret = regulator_set_voltage(ctrl_reg,
+		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+					    next_ctrl_uV,
 					    next_ctrl_uV,
-					    next_ctrl_uV);
+					    PM_SUSPEND_ON);
 		if (ret)
 			goto err;
 
@@ -130,7 +134,8 @@ static int vctrl_set_voltage(struct regulator_dev *rdev,
 
 err:
 	/* Try to go back to original voltage */
-	regulator_set_voltage(ctrl_reg, orig_ctrl_uV, orig_ctrl_uV);
+	regulator_set_voltage_rdev(ctrl_reg->rdev, orig_ctrl_uV, orig_ctrl_uV,
+				   PM_SUSPEND_ON);
 
 	return ret;
 }
@@ -155,9 +160,10 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 
 	if (selector >= vctrl->sel || !vctrl->ovp_threshold) {
 		/* voltage rising or no OVP */
-		ret = regulator_set_voltage(ctrl_reg,
+		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
+					    vctrl->vtable[selector].ctrl,
 					    vctrl->vtable[selector].ctrl,
-					    vctrl->vtable[selector].ctrl);
+					    PM_SUSPEND_ON);
 		if (!ret)
 			vctrl->sel = selector;
 
@@ -173,9 +179,10 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 		else
 			next_sel = vctrl->vtable[vctrl->sel].ovp_min_sel;
 
-		ret = regulator_set_voltage(ctrl_reg,
+		ret = regulator_set_voltage_rdev(ctrl_reg->rdev,
 					    vctrl->vtable[next_sel].ctrl,
-					    vctrl->vtable[next_sel].ctrl);
+					    vctrl->vtable[next_sel].ctrl,
+					    PM_SUSPEND_ON);
 		if (ret) {
 			dev_err(&rdev->dev,
 				"failed to set control voltage to %duV\n",
@@ -195,9 +202,10 @@ static int vctrl_set_voltage_sel(struct regulator_dev *rdev,
 err:
 	if (vctrl->sel != orig_sel) {
 		/* Try to go back to original voltage */
-		if (!regulator_set_voltage(ctrl_reg,
+		if (!regulator_set_voltage_rdev(ctrl_reg->rdev,
+					   vctrl->vtable[orig_sel].ctrl,
 					   vctrl->vtable[orig_sel].ctrl,
-					   vctrl->vtable[orig_sel].ctrl))
+					   PM_SUSPEND_ON))
 			vctrl->sel = orig_sel;
 		else
 			dev_warn(&rdev->dev,
@@ -482,7 +490,7 @@ static int vctrl_probe(struct platform_device *pdev)
 		if (ret)
 			return ret;
 
-		ctrl_uV = regulator_get_voltage(vctrl->ctrl_reg);
+		ctrl_uV = regulator_get_voltage_rdev(vctrl->ctrl_reg->rdev);
 		if (ctrl_uV < 0) {
 			dev_err(&pdev->dev, "failed to get control voltage\n");
 			return ctrl_uV;
diff --git a/drivers/regulator/vqmmc-ipq4019-regulator.c b/drivers/regulator/vqmmc-ipq4019-regulator.c
new file mode 100644
index 000000000000..6d5ae25d08d1
--- /dev/null
+++ b/drivers/regulator/vqmmc-ipq4019-regulator.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2019 Mantas Pucka <mantas@8devices.com>
+// Copyright (c) 2019 Robert Marko <robert.marko@sartura.hr>
+//
+// Driver for IPQ4019 SD/MMC controller's I/O LDO voltage regulator
+
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+static const unsigned int ipq4019_vmmc_voltages[] = {
+	1500000, 1800000, 2500000, 3000000,
+};
+
+static const struct regulator_ops ipq4019_regulator_voltage_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.map_voltage = regulator_map_voltage_ascend,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc vmmc_regulator = {
+	.name		= "vmmcq",
+	.ops		= &ipq4019_regulator_voltage_ops,
+	.type		= REGULATOR_VOLTAGE,
+	.owner		= THIS_MODULE,
+	.volt_table	= ipq4019_vmmc_voltages,
+	.n_voltages	= ARRAY_SIZE(ipq4019_vmmc_voltages),
+	.vsel_reg	= 0,
+	.vsel_mask	= 0x3,
+};
+
+static const struct regmap_config ipq4019_vmmcq_regmap_config = {
+	.reg_bits	= 32,
+	.reg_stride	= 4,
+	.val_bits	= 32,
+};
+
+static int ipq4019_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regulator_init_data *init_data;
+	struct regulator_config cfg = {};
+	struct regulator_dev *rdev;
+	struct resource *res;
+	struct regmap *rmap;
+	void __iomem *base;
+
+	init_data = of_get_regulator_init_data(dev, dev->of_node,
+					       &vmmc_regulator);
+	if (!init_data)
+		return -EINVAL;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	rmap = devm_regmap_init_mmio(dev, base, &ipq4019_vmmcq_regmap_config);
+	if (IS_ERR(rmap))
+		return PTR_ERR(rmap);
+
+	cfg.dev = dev;
+	cfg.init_data = init_data;
+	cfg.of_node = dev->of_node;
+	cfg.regmap = rmap;
+
+	rdev = devm_regulator_register(dev, &vmmc_regulator, &cfg);
+	if (IS_ERR(rdev)) {
+		dev_err(dev, "Failed to register regulator: %ld\n",
+			PTR_ERR(rdev));
+		return PTR_ERR(rdev);
+	}
+	platform_set_drvdata(pdev, rdev);
+
+	return 0;
+}
+
+static const struct of_device_id regulator_ipq4019_of_match[] = {
+	{ .compatible = "qcom,vqmmc-ipq4019-regulator", },
+	{},
+};
+
+static struct platform_driver ipq4019_regulator_driver = {
+	.probe = ipq4019_regulator_probe,
+	.driver = {
+		.name = "vqmmc-ipq4019-regulator",
+		.of_match_table = of_match_ptr(regulator_ipq4019_of_match),
+	},
+};
+module_platform_driver(ipq4019_regulator_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mantas Pucka <mantas@8devices.com>");
+MODULE_DESCRIPTION("IPQ4019 VQMMC voltage regulator");
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index 337a46391527..6a92fd3105a3 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -287,6 +287,8 @@ void regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
 				     const char *const *supply_names,
 				     unsigned int num_supplies);
 
+bool regulator_is_equal(struct regulator *reg1, struct regulator *reg2);
+
 #else
 
 /*
@@ -593,6 +595,11 @@ regulator_bulk_set_supply_names(struct regulator_bulk_data *consumers,
 {
 }
 
+static inline bool
+regulator_is_equal(struct regulator *reg1, struct regulator *reg2)
+{
+	return false;
+}
 #endif
 
 static inline int regulator_set_voltage_triplet(struct regulator *regulator,
author	Linus Torvalds	2020-01-27 11:18:55 -0800
committer	Linus Torvalds	2020-01-27 11:18:55 -0800
commit	aae1464f46a2403565f75717438118691d31ccf1 (patch)
tree	17887992bc955719d5cc449bee73b90f8284d7ed
parent	1e1ab4ba4747afad3e44a77dded1bab4cb77049e (diff)
parent	e4e4c2ff78edd2f9c7d2d3e588ca68ffa1dd8dc8 (diff)