diff options
author | Linus Torvalds | 2013-02-28 20:42:33 -0800 |
---|---|---|
committer | Linus Torvalds | 2013-02-28 20:42:33 -0800 |
commit | ad6c2c2eb34f234d6253292b9b3c047614fbfe7e (patch) | |
tree | 8ceb00db9874c09f3002b5ca579f1f9146b30a28 | |
parent | 19cc90f58d4f2538b4cf5371681a057d2e5209f2 (diff) | |
parent | b0769891ba7baa53f270dc70d71934748beb4c5b (diff) |
Merge branch 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac
Pull EDAC fixes and ghes-edac from Mauro Carvalho Chehab:
"For:
- Some fixes at edac drivers (i7core_edac, sb_edac, i3200_edac);
- error injection support for i5100, when EDAC debug is enabled;
- fix edac when it is loaded builtin (early init for the subsystem);
- a "Firmware First" EDAC driver, allowing ghes to report errors via
EDAC (ghes-edac).
With regards to ghes-edac, this fixes a longstanding BZ at Red Hat
that happens with Nehalem and Sandy Bridge CPUs: when both GHES and
i7core_edac or sb_edac are running, the error reports are
unpredictable, as both BIOS and OS race to access the registers. With
ghes-edac, the EDAC core will refuse to register any other concurrent
memory error driver.
This patchset moves the ghes struct definitions to a separate header
file (include/acpi/ghes.h) and adds 3 hooks at apei/ghes.c to
register/unregister and to report errors via ghes-edac. Those changes
were acked by ghes driver maintainer (Huang)."
* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (30 commits)
i5100_edac: convert to use simple_open()
ghes_edac: fix to use list_for_each_entry_safe() when delete list items
ghes_edac: Fix RAS tracing
ghes_edac: Make it compliant with UEFI spec 2.3.1
ghes_edac: Improve driver's printk messages
ghes_edac: Don't credit the same memory dimm twice
ghes_edac: do a better job of filling EDAC DIMM info
ghes_edac: add support for reporting errors via EDAC
ghes_edac: Register at EDAC core the BIOS report
ghes: add the needed hooks for EDAC error report
ghes: move structures/enum to a header file
edac: add support for error type "Info"
edac: add support for raw error reports
edac: reduce stack pressure by using a pre-allocated buffer
edac: lock module owner to avoid error report conflicts
edac: remove proc_name from mci structure
edac: add a new memory layer type
edac: initialize the core earlier
edac: better report error conditions in debug mode
i5100_edac: Remove two checkpatch warnings
...
-rw-r--r-- | MAINTAINERS | 7 | ||||
-rw-r--r-- | drivers/acpi/apei/ghes.c | 71 | ||||
-rw-r--r-- | drivers/edac/Kconfig | 23 | ||||
-rw-r--r-- | drivers/edac/Makefile | 1 | ||||
-rw-r--r-- | drivers/edac/edac_core.h | 5 | ||||
-rw-r--r-- | drivers/edac/edac_mc.c | 152 | ||||
-rw-r--r-- | drivers/edac/edac_mc_sysfs.c | 36 | ||||
-rw-r--r-- | drivers/edac/edac_module.c | 2 | ||||
-rw-r--r-- | drivers/edac/edac_pci_sysfs.c | 2 | ||||
-rw-r--r-- | drivers/edac/ghes_edac.c | 537 | ||||
-rw-r--r-- | drivers/edac/i3200_edac.c | 37 | ||||
-rw-r--r-- | drivers/edac/i5100_edac.c | 178 | ||||
-rw-r--r-- | drivers/edac/i7core_edac.c | 8 | ||||
-rw-r--r-- | drivers/edac/sb_edac.c | 2 | ||||
-rw-r--r-- | include/acpi/ghes.h | 72 | ||||
-rw-r--r-- | include/linux/edac.h | 79 | ||||
-rw-r--r-- | include/linux/pci_ids.h | 1 | ||||
-rw-r--r-- | include/ras/ras_event.h | 4 |
18 files changed, 1077 insertions, 140 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c7b9b2bf8a0a..6db1c6bdf015 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2904,6 +2904,13 @@ W: bluesmoke.sourceforge.net S: Maintained F: drivers/edac/e7xxx_edac.c +EDAC-GHES +M: Mauro Carvalho Chehab <mchehab@redhat.com> +L: linux-edac@vger.kernel.org +W: bluesmoke.sourceforge.net +S: Maintained +F: drivers/edac/ghes-edac.c + EDAC-I82443BXGX M: Tim Small <tim@buttersideup.com> L: linux-edac@vger.kernel.org diff --git a/drivers/acpi/apei/ghes.c b/drivers/acpi/apei/ghes.c index 7ae2750bb457..d668a8ae602b 100644 --- a/drivers/acpi/apei/ghes.c +++ b/drivers/acpi/apei/ghes.c @@ -48,8 +48,8 @@ #include <linux/genalloc.h> #include <linux/pci.h> #include <linux/aer.h> -#include <acpi/apei.h> -#include <acpi/hed.h> + +#include <acpi/ghes.h> #include <asm/mce.h> #include <asm/tlbflush.h> #include <asm/nmi.h> @@ -84,42 +84,6 @@ ((struct acpi_hest_generic_status *) \ ((struct ghes_estatus_node *)(estatus_node) + 1)) -/* - * One struct ghes is created for each generic hardware error source. - * It provides the context for APEI hardware error timer/IRQ/SCI/NMI - * handler. - * - * estatus: memory buffer for error status block, allocated during - * HEST parsing. - */ -#define GHES_TO_CLEAR 0x0001 -#define GHES_EXITING 0x0002 - -struct ghes { - struct acpi_hest_generic *generic; - struct acpi_hest_generic_status *estatus; - u64 buffer_paddr; - unsigned long flags; - union { - struct list_head list; - struct timer_list timer; - unsigned int irq; - }; -}; - -struct ghes_estatus_node { - struct llist_node llnode; - struct acpi_hest_generic *generic; -}; - -struct ghes_estatus_cache { - u32 estatus_len; - atomic_t count; - struct acpi_hest_generic *generic; - unsigned long long time_in; - struct rcu_head rcu; -}; - bool ghes_disable; module_param_named(disable, ghes_disable, bool, 0); @@ -333,13 +297,6 @@ static void ghes_fini(struct ghes *ghes) apei_unmap_generic_address(&ghes->generic->error_status_address); } -enum { - GHES_SEV_NO = 0x0, - GHES_SEV_CORRECTED = 0x1, - GHES_SEV_RECOVERABLE = 0x2, - GHES_SEV_PANIC = 0x3, -}; - static inline int ghes_severity(int severity) { switch (severity) { @@ -452,7 +409,8 @@ static void ghes_clear_estatus(struct ghes *ghes) ghes->flags &= ~GHES_TO_CLEAR; } -static void ghes_do_proc(const struct acpi_hest_generic_status *estatus) +static void ghes_do_proc(struct ghes *ghes, + const struct acpi_hest_generic_status *estatus) { int sev, sec_sev; struct acpi_hest_generic_data *gdata; @@ -464,6 +422,8 @@ static void ghes_do_proc(const struct acpi_hest_generic_status *estatus) CPER_SEC_PLATFORM_MEM)) { struct cper_sec_mem_err *mem_err; mem_err = (struct cper_sec_mem_err *)(gdata+1); + ghes_edac_report_mem_error(ghes, sev, mem_err); + #ifdef CONFIG_X86_MCE apei_mce_report_mem_error(sev == GHES_SEV_CORRECTED, mem_err); @@ -682,7 +642,7 @@ static int ghes_proc(struct ghes *ghes) if (ghes_print_estatus(NULL, ghes->generic, ghes->estatus)) ghes_estatus_cache_add(ghes->generic, ghes->estatus); } - ghes_do_proc(ghes->estatus); + ghes_do_proc(ghes, ghes->estatus); out: ghes_clear_estatus(ghes); return 0; @@ -775,7 +735,7 @@ static void ghes_proc_in_irq(struct irq_work *irq_work) estatus = GHES_ESTATUS_FROM_NODE(estatus_node); len = apei_estatus_len(estatus); node_len = GHES_ESTATUS_NODE_LEN(len); - ghes_do_proc(estatus); + ghes_do_proc(estatus_node->ghes, estatus); if (!ghes_estatus_cached(estatus)) { generic = estatus_node->generic; if (ghes_print_estatus(NULL, generic, estatus)) @@ -864,6 +824,7 @@ static int ghes_notify_nmi(unsigned int cmd, struct pt_regs *regs) estatus_node = (void *)gen_pool_alloc(ghes_estatus_pool, node_len); if (estatus_node) { + estatus_node->ghes = ghes; estatus_node->generic = ghes->generic; estatus = GHES_ESTATUS_FROM_NODE(estatus_node); memcpy(estatus, ghes->estatus, len); @@ -942,6 +903,11 @@ static int ghes_probe(struct platform_device *ghes_dev) ghes = NULL; goto err; } + + rc = ghes_edac_register(ghes, &ghes_dev->dev); + if (rc < 0) + goto err; + switch (generic->notify.type) { case ACPI_HEST_NOTIFY_POLLED: ghes->timer.function = ghes_poll_func; @@ -954,13 +920,13 @@ static int ghes_probe(struct platform_device *ghes_dev) if (acpi_gsi_to_irq(generic->notify.vector, &ghes->irq)) { pr_err(GHES_PFX "Failed to map GSI to IRQ for generic hardware error source: %d\n", generic->header.source_id); - goto err; + goto err_edac_unreg; } if (request_irq(ghes->irq, ghes_irq_func, 0, "GHES IRQ", ghes)) { pr_err(GHES_PFX "Failed to register IRQ for generic hardware error source: %d\n", generic->header.source_id); - goto err; + goto err_edac_unreg; } break; case ACPI_HEST_NOTIFY_SCI: @@ -986,6 +952,8 @@ static int ghes_probe(struct platform_device *ghes_dev) platform_set_drvdata(ghes_dev, ghes); return 0; +err_edac_unreg: + ghes_edac_unregister(ghes); err: if (ghes) { ghes_fini(ghes); @@ -1038,6 +1006,9 @@ static int ghes_remove(struct platform_device *ghes_dev) } ghes_fini(ghes); + + ghes_edac_unregister(ghes); + kfree(ghes); platform_set_drvdata(ghes_dev, NULL); diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index acb709bfac0f..e443f2c1dfd1 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -80,6 +80,29 @@ config EDAC_MM_EDAC occurred so that a particular failing memory module can be replaced. If unsure, select 'Y'. +config EDAC_GHES + bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" + depends on ACPI_APEI_GHES && (EDAC_MM_EDAC=y) + default y + help + Not all machines support hardware-driven error report. Some of those + provide a BIOS-driven error report mechanism via ACPI, using the + APEI/GHES driver. By enabling this option, the error reports provided + by GHES are sent to userspace via the EDAC API. + + When this option is enabled, it will disable the hardware-driven + mechanisms, if a GHES BIOS is detected, entering into the + "Firmware First" mode. + + It should be noticed that keeping both GHES and a hardware-driven + error mechanism won't work well, as BIOS will race with OS, while + reading the error registers. So, if you want to not use "Firmware + first" GHES error mechanism, you should disable GHES either at + compilation time or by passing "ghes.disable=1" Kernel parameter + at boot time. + + In doubt, say 'Y'. + config EDAC_AMD64 tristate "AMD64 (Opteron, Athlon64) K8, F10h" depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 5608a9ba61b7..4154ed6a02c6 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -16,6 +16,7 @@ ifdef CONFIG_PCI edac_core-y += edac_pci.o edac_pci_sysfs.o endif +obj-$(CONFIG_EDAC_GHES) += ghes_edac.o obj-$(CONFIG_EDAC_MCE_INJ) += mce_amd_inj.o edac_mce_amd-y := mce_amd.o diff --git a/drivers/edac/edac_core.h b/drivers/edac/edac_core.h index 23bb99fa44f1..3c2625e7980d 100644 --- a/drivers/edac/edac_core.h +++ b/drivers/edac/edac_core.h @@ -453,6 +453,11 @@ extern struct mem_ctl_info *find_mci_by_dev(struct device *dev); extern struct mem_ctl_info *edac_mc_del_mc(struct device *dev); extern int edac_mc_find_csrow_by_page(struct mem_ctl_info *mci, unsigned long page); + +void edac_raw_mc_handle_error(const enum hw_event_mc_err_type type, + struct mem_ctl_info *mci, + struct edac_raw_error_desc *e); + void edac_mc_handle_error(const enum hw_event_mc_err_type type, struct mem_ctl_info *mci, const u16 error_count, diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index d1e9eb191f2b..cdb81aa73ab7 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -42,6 +42,12 @@ static DEFINE_MUTEX(mem_ctls_mutex); static LIST_HEAD(mc_devices); +/* + * Used to lock EDAC MC to just one module, avoiding two drivers e. g. + * apei/ghes and i7core_edac to be used at the same time. + */ +static void const *edac_mc_owner; + unsigned edac_dimm_info_location(struct dimm_info *dimm, char *buf, unsigned len) { @@ -441,13 +447,6 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, mci->op_state = OP_ALLOC; - /* at this point, the root kobj is valid, and in order to - * 'free' the object, then the function: - * edac_mc_unregister_sysfs_main_kobj() must be called - * which will perform kobj unregistration and the actual free - * will occur during the kobject callback operation - */ - return mci; error: @@ -666,9 +665,9 @@ fail1: return 1; } -static void del_mc_from_global_list(struct mem_ctl_info *mci) +static int del_mc_from_global_list(struct mem_ctl_info *mci) { - atomic_dec(&edac_handlers); + int handlers = atomic_dec_return(&edac_handlers); list_del_rcu(&mci->link); /* these are for safe removal of devices from global list while @@ -676,6 +675,8 @@ static void del_mc_from_global_list(struct mem_ctl_info *mci) */ synchronize_rcu(); INIT_LIST_HEAD(&mci->link); + + return handlers; } /** @@ -719,6 +720,7 @@ EXPORT_SYMBOL(edac_mc_find); /* FIXME - should a warning be printed if no error detection? correction? */ int edac_mc_add_mc(struct mem_ctl_info *mci) { + int ret = -EINVAL; edac_dbg(0, "\n"); #ifdef CONFIG_EDAC_DEBUG @@ -749,6 +751,11 @@ int edac_mc_add_mc(struct mem_ctl_info *mci) #endif mutex_lock(&mem_ctls_mutex); + if (edac_mc_owner && edac_mc_owner != mci->mod_name) { + ret = -EPERM; + goto fail0; + } + if (add_mc_to_global_list(mci)) goto fail0; @@ -775,6 +782,8 @@ int edac_mc_add_mc(struct mem_ctl_info *mci) edac_mc_printk(mci, KERN_INFO, "Giving out device to '%s' '%s':" " DEV %s\n", mci->mod_name, mci->ctl_name, edac_dev_name(mci)); + edac_mc_owner = mci->mod_name; + mutex_unlock(&mem_ctls_mutex); return 0; @@ -783,7 +792,7 @@ fail1: fail0: mutex_unlock(&mem_ctls_mutex); - return 1; + return ret; } EXPORT_SYMBOL_GPL(edac_mc_add_mc); @@ -809,7 +818,8 @@ struct mem_ctl_info *edac_mc_del_mc(struct device *dev) return NULL; } - del_mc_from_global_list(mci); + if (!del_mc_from_global_list(mci)) + edac_mc_owner = NULL; mutex_unlock(&mem_ctls_mutex); /* flush workq processes */ @@ -907,6 +917,7 @@ const char *edac_layer_name[] = { [EDAC_MC_LAYER_CHANNEL] = "channel", [EDAC_MC_LAYER_SLOT] = "slot", [EDAC_MC_LAYER_CHIP_SELECT] = "csrow", + [EDAC_MC_LAYER_ALL_MEM] = "memory", }; EXPORT_SYMBOL_GPL(edac_layer_name); @@ -1054,7 +1065,46 @@ static void edac_ue_error(struct mem_ctl_info *mci, edac_inc_ue_error(mci, enable_per_layer_report, pos, error_count); } -#define OTHER_LABEL " or " +/** + * edac_raw_mc_handle_error - reports a memory event to userspace without doing + * anything to discover the error location + * + * @type: severity of the error (CE/UE/Fatal) + * @mci: a struct mem_ctl_info pointer + * @e: error description + * + * This raw function is used internally by edac_mc_handle_error(). It should + * only be called directly when the hardware error come directly from BIOS, + * like in the case of APEI GHES driver. + */ +void edac_raw_mc_handle_error(const enum hw_event_mc_err_type type, + struct mem_ctl_info *mci, + struct edac_raw_error_desc *e) +{ + char detail[80]; + int pos[EDAC_MAX_LAYERS] = { e->top_layer, e->mid_layer, e->low_layer }; + + /* Memory type dependent details about the error */ + if (type == HW_EVENT_ERR_CORRECTED) { + snprintf(detail, sizeof(detail), + "page:0x%lx offset:0x%lx grain:%ld syndrome:0x%lx", + e->page_frame_number, e->offset_in_page, + e->grain, e->syndrome); + edac_ce_error(mci, e->error_count, pos, e->msg, e->location, e->label, + detail, e->other_detail, e->enable_per_layer_report, + e->page_frame_number, e->offset_in_page, e->grain); + } else { + snprintf(detail, sizeof(detail), + "page:0x%lx offset:0x%lx grain:%ld", + e->page_frame_number, e->offset_in_page, e->grain); + + edac_ue_error(mci, e->error_count, pos, e->msg, e->location, e->label, + detail, e->other_detail, e->enable_per_layer_report); + } + + +} +EXPORT_SYMBOL_GPL(edac_raw_mc_handle_error); /** * edac_mc_handle_error - reports a memory event to userspace @@ -1086,19 +1136,27 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, const char *msg, const char *other_detail) { - /* FIXME: too much for stack: move it to some pre-alocated area */ - char detail[80], location[80]; - char label[(EDAC_MC_LABEL_LEN + 1 + sizeof(OTHER_LABEL)) * mci->tot_dimms]; char *p; int row = -1, chan = -1; int pos[EDAC_MAX_LAYERS] = { top_layer, mid_layer, low_layer }; - int i; - long grain; - bool enable_per_layer_report = false; + int i, n_labels = 0; u8 grain_bits; + struct edac_raw_error_desc *e = &mci->error_desc; edac_dbg(3, "MC%d\n", mci->mc_idx); + /* Fills the error report buffer */ + memset(e, 0, sizeof (*e)); + e->error_count = error_count; + e->top_layer = top_layer; + e->mid_layer = mid_layer; + e->low_layer = low_layer; + e->page_frame_number = page_frame_number; + e->offset_in_page = offset_in_page; + e->syndrome = syndrome; + e->msg = msg; + e->other_detail = other_detail; + /* * Check if the event report is consistent and if the memory * location is known. If it is known, enable_per_layer_report will be @@ -1121,7 +1179,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, pos[i] = -1; } if (pos[i] >= 0) - enable_per_layer_report = true; + e->enable_per_layer_report = true; } /* @@ -1135,8 +1193,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, * where each memory belongs to a separate channel within the same * branch. */ - grain = 0; - p = label; + p = e->label; *p = '\0'; for (i = 0; i < mci->tot_dimms; i++) { @@ -1150,8 +1207,8 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, continue; /* get the max grain, over the error match range */ - if (dimm->grain > grain) - grain = dimm->grain; + if (dimm->grain > e->grain) + e->grain = dimm->grain; /* * If the error is memory-controller wide, there's no need to @@ -1159,8 +1216,13 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, * channel/memory controller/... may be affected. * Also, don't show errors for empty DIMM slots. */ - if (enable_per_layer_report && dimm->nr_pages) { - if (p != label) { + if (e->enable_per_layer_report && dimm->nr_pages) { + if (n_labels >= EDAC_MAX_LABELS) { + e->enable_per_layer_report = false; + break; + } + n_labels++; + if (p != e->label) { strcpy(p, OTHER_LABEL); p += strlen(OTHER_LABEL); } @@ -1187,12 +1249,12 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, } } - if (!enable_per_layer_report) { - strcpy(label, "any memory"); + if (!e->enable_per_layer_report) { + strcpy(e->label, "any memory"); } else { edac_dbg(4, "csrow/channel to increment: (%d,%d)\n", row, chan); - if (p == label) - strcpy(label, "unknown memory"); + if (p == e->label) + strcpy(e->label, "unknown memory"); if (type == HW_EVENT_ERR_CORRECTED) { if (row >= 0) { mci->csrows[row]->ce_count += error_count; @@ -1205,7 +1267,7 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, } /* Fill the RAM location data */ - p = location; + p = e->location; for (i = 0; i < mci->n_layers; i++) { if (pos[i] < 0) @@ -1215,32 +1277,16 @@ void edac_mc_handle_error(const enum hw_event_mc_err_type type, edac_layer_name[mci->layers[i].type], pos[i]); } - if (p > location) + if (p > e->location) *(p - 1) = '\0'; /* Report the error via the trace interface */ - grain_bits = fls_long(grain) + 1; - trace_mc_event(type, msg, label, error_count, - mci->mc_idx, top_layer, mid_layer, low_layer, - PAGES_TO_MiB(page_frame_number) | offset_in_page, - grain_bits, syndrome, other_detail); + grain_bits = fls_long(e->grain) + 1; + trace_mc_event(type, e->msg, e->label, e->error_count, + mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer, + PAGES_TO_MiB(e->page_frame_number) | e->offset_in_page, + grain_bits, e->syndrome, e->other_detail); - /* Memory type dependent details about the error */ - if (type == HW_EVENT_ERR_CORRECTED) { - snprintf(detail, sizeof(detail), - "page:0x%lx offset:0x%lx grain:%ld syndrome:0x%lx", - page_frame_number, offset_in_page, - grain, syndrome); - edac_ce_error(mci, error_count, pos, msg, location, label, - detail, other_detail, enable_per_layer_report, - page_frame_number, offset_in_page, grain); - } else { - snprintf(detail, sizeof(detail), - "page:0x%lx offset:0x%lx grain:%ld", - page_frame_number, offset_in_page, grain); - - edac_ue_error(mci, error_count, pos, msg, location, label, - detail, other_detail, enable_per_layer_report); - } + edac_raw_mc_handle_error(type, mci, e); } EXPORT_SYMBOL_GPL(edac_mc_handle_error); diff --git a/drivers/edac/edac_mc_sysfs.c b/drivers/edac/edac_mc_sysfs.c index 0ca1ca71157f..4f4b6137d74e 100644 --- a/drivers/edac/edac_mc_sysfs.c +++ b/drivers/edac/edac_mc_sysfs.c @@ -7,7 +7,7 @@ * * Written Doug Thompson <norsk5@xmission.com> www.softwarebitmaker.com * - * (c) 2012 - Mauro Carvalho Chehab <mchehab@redhat.com> + * (c) 2012-2013 - Mauro Carvalho Chehab <mchehab@redhat.com> * The entire API were re-written, and ported to use struct device * */ @@ -429,8 +429,12 @@ static int edac_create_csrow_objects(struct mem_ctl_info *mci) if (!nr_pages_per_csrow(csrow)) continue; err = edac_create_csrow_object(mci, mci->csrows[i], i); - if (err < 0) + if (err < 0) { + edac_dbg(1, + "failure: create csrow objects for csrow %d\n", + i); goto error; + } } return 0; @@ -677,9 +681,6 @@ static ssize_t mci_sdram_scrub_rate_store(struct device *dev, unsigned long bandwidth = 0; int new_bw = 0; - if (!mci->set_sdram_scrub_rate) - return -ENODEV; - if (strict_strtoul(data, 10, &bandwidth) < 0) return -EINVAL; @@ -703,9 +704,6 @@ static ssize_t mci_sdram_scrub_rate_show(struct device *dev, struct mem_ctl_info *mci = to_mci(dev); int bandwidth = 0; - if (!mci->get_sdram_scrub_rate) - return -ENODEV; - bandwidth = mci->get_sdram_scrub_rate(mci); if (bandwidth < 0) { edac_printk(KERN_DEBUG, EDAC_MC, "Error reading scrub rate\n"); @@ -866,8 +864,7 @@ DEVICE_ATTR(ce_count, S_IRUGO, mci_ce_count_show, NULL); DEVICE_ATTR(max_location, S_IRUGO, mci_max_location_show, NULL); /* memory scrubber attribute file */ -DEVICE_ATTR(sdram_scrub_rate, S_IRUGO | S_IWUSR, mci_sdram_scrub_rate_show, - mci_sdram_scrub_rate_store); +DEVICE_ATTR(sdram_scrub_rate, 0, NULL, NULL); static struct attribute *mci_attrs[] = { &dev_attr_reset_counters.attr, @@ -878,7 +875,6 @@ static struct attribute *mci_attrs[] = { &dev_attr_ce_noinfo_count.attr, &dev_attr_ue_count.attr, &dev_attr_ce_count.attr, - &dev_attr_sdram_scrub_rate.attr, &dev_attr_max_location.attr, NULL }; @@ -1007,11 +1003,28 @@ int edac_create_sysfs_mci_device(struct mem_ctl_info *mci) edac_dbg(0, "creating device %s\n", dev_name(&mci->dev)); err = device_add(&mci->dev); if (err < 0) { + edac_dbg(1, "failure: create device %s\n", dev_name(&mci->dev)); bus_unregister(&mci->bus); kfree(mci->bus.name); return err; } + if (mci->set_sdram_scrub_rate || mci->get_sdram_scrub_rate) { + if (mci->get_sdram_scrub_rate) { + dev_attr_sdram_scrub_rate.attr.mode |= S_IRUGO; + dev_attr_sdram_scrub_rate.show = &mci_sdram_scrub_rate_show; + } + if (mci->set_sdram_scrub_rate) { + dev_attr_sdram_scrub_rate.attr.mode |= S_IWUSR; + dev_attr_sdram_scrub_rate.store = &mci_sdram_scrub_rate_store; + } + err = device_create_file(&mci->dev, + &dev_attr_sdram_scrub_rate); + if (err) { + edac_dbg(1, "failure: create sdram_scrub_rate\n"); + goto fail2; + } + } /* * Create the dimm/rank devices */ @@ -1056,6 +1069,7 @@ fail: continue; device_unregister(&dimm->dev); } +fail2: device_unregister(&mci->dev); bus_unregister(&mci->bus); kfree(mci->bus.name); diff --git a/drivers/edac/edac_module.c b/drivers/edac/edac_module.c index 12c951a2c33d..a66941fea5a4 100644 --- a/drivers/edac/edac_module.c +++ b/drivers/edac/edac_module.c @@ -146,7 +146,7 @@ static void __exit edac_exit(void) /* * Inform the kernel of our entry and exit points */ -module_init(edac_init); +subsys_initcall(edac_init); module_exit(edac_exit); MODULE_LICENSE("GPL"); diff --git a/drivers/edac/edac_pci_sysfs.c b/drivers/edac/edac_pci_sysfs.c index 0056c4dae9d5..e8658e451762 100644 --- a/drivers/edac/edac_pci_sysfs.c +++ b/drivers/edac/edac_pci_sysfs.c @@ -429,8 +429,8 @@ static void edac_pci_main_kobj_teardown(void) if (atomic_dec_return(&edac_pci_sysfs_refcount) == 0) { edac_dbg(0, "called kobject_put on main kobj\n"); kobject_put(edac_pci_top_main_kobj); + edac_put_sysfs_subsys(); } - edac_put_sysfs_subsys(); } /* diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c new file mode 100644 index 000000000000..bb534670ec02 --- /dev/null +++ b/drivers/edac/ghes_edac.c @@ -0,0 +1,537 @@ +/* + * GHES/EDAC Linux driver + * + * This file may be distributed under the terms of the GNU General Public + * License version 2. + * + * Copyright (c) 2013 by Mauro Carvalho Chehab <mchehab@redhat.com> + * + * Red Hat Inc. http://www.redhat.com + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <acpi/ghes.h> +#include <linux/edac.h> +#include <linux/dmi.h> +#include "edac_core.h" +#include <ras/ras_event.h> + +#define GHES_EDAC_REVISION " Ver: 1.0.0" + +struct ghes_edac_pvt { + struct list_head list; + struct ghes *ghes; + struct mem_ctl_info *mci; + + /* Buffers for the error handling routine */ + char detail_location[240]; + char other_detail[160]; + char msg[80]; +}; + +static LIST_HEAD(ghes_reglist); +static DEFINE_MUTEX(ghes_edac_lock); +static int ghes_edac_mc_num; + + +/* Memory Device - Type 17 of SMBIOS spec */ +struct memdev_dmi_entry { + u8 type; + u8 length; + u16 handle; + u16 phys_mem_array_handle; + u16 mem_err_info_handle; + u16 total_width; + u16 data_width; + u16 size; + u8 form_factor; + u8 device_set; + u8 device_locator; + u8 bank_locator; + u8 memory_type; + u16 type_detail; + u16 speed; + u8 manufacturer; + u8 serial_number; + u8 asset_tag; + u8 part_number; + u8 attributes; + u32 extended_size; + u16 conf_mem_clk_speed; +} __attribute__((__packed__)); + +struct ghes_edac_dimm_fill { + struct mem_ctl_info *mci; + unsigned count; +}; + +char *memory_type[] = { + [MEM_EMPTY] = "EMPTY", + [MEM_RESERVED] = "RESERVED", + [MEM_UNKNOWN] = "UNKNOWN", + [MEM_FPM] = "FPM", + [MEM_EDO] = "EDO", + [MEM_BEDO] = "BEDO", + [MEM_SDR] = "SDR", + [MEM_RDR] = "RDR", + [MEM_DDR] = "DDR", + [MEM_RDDR] = "RDDR", + [MEM_RMBS] = "RMBS", + [MEM_DDR2] = "DDR2", + [MEM_FB_DDR2] = "FB_DDR2", + [MEM_RDDR2] = "RDDR2", + [MEM_XDR] = "XDR", + [MEM_DDR3] = "DDR3", + [MEM_RDDR3] = "RDDR3", +}; + +static void ghes_edac_count_dimms(const struct dmi_header *dh, void *arg) +{ + int *num_dimm = arg; + + if (dh->type == DMI_ENTRY_MEM_DEVICE) + (*num_dimm)++; +} + +static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg) +{ + struct ghes_edac_dimm_fill *dimm_fill = arg; + struct mem_ctl_info *mci = dimm_fill->mci; + + if (dh->type == DMI_ENTRY_MEM_DEVICE) { + struct memdev_dmi_entry *entry = (struct memdev_dmi_entry *)dh; + struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, + mci->n_layers, + dimm_fill->count, 0, 0); + + if (entry->size == 0xffff) { + pr_info("Can't get DIMM%i size\n", + dimm_fill->count); + dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */ + } else if (entry->size == 0x7fff) { + dimm->nr_pages = MiB_TO_PAGES(entry->extended_size); + } else { + if (entry->size & 1 << 15) + dimm->nr_pages = MiB_TO_PAGES((entry->size & + 0x7fff) << 10); + else + dimm->nr_pages = MiB_TO_PAGES(entry->size); + } + + switch (entry->memory_type) { + case 0x12: + if (entry->type_detail & 1 << 13) + dimm->mtype = MEM_RDDR; + else + dimm->mtype = MEM_DDR; + break; + case 0x13: + if (entry->type_detail & 1 << 13) + dimm->mtype = MEM_RDDR2; + else + dimm->mtype = MEM_DDR2; + break; + case 0x14: + dimm->mtype = MEM_FB_DDR2; + break; + case 0x18: + if (entry->type_detail & 1 << 13) + dimm->mtype = MEM_RDDR3; + else + dimm->mtype = MEM_DDR3; + break; + default: + if (entry->type_detail & 1 << 6) + dimm->mtype = MEM_RMBS; + else if ((entry->type_detail & ((1 << 7) | (1 << 13))) + == ((1 << 7) | (1 << 13))) + dimm->mtype = MEM_RDR; + else if (entry->type_detail & 1 << 7) + dimm->mtype = MEM_SDR; + else if (entry->type_detail & 1 << 9) + dimm->mtype = MEM_EDO; + else + dimm->mtype = MEM_UNKNOWN; + } + + /* + * Actually, we can only detect if the memory has bits for + * checksum or not + */ + if (entry->total_width == entry->data_width) + dimm->edac_mode = EDAC_NONE; + else + dimm->edac_mode = EDAC_SECDED; + + dimm->dtype = DEV_UNKNOWN; + dimm->grain = 128; /* Likely, worse case */ + + /* + * FIXME: It shouldn't be hard to also fill the DIMM labels + */ + + if (dimm->nr_pages) { + edac_dbg(1, "DIMM%i: %s size = %d MB%s\n", + dimm_fill->count, memory_type[dimm->mtype], + PAGES_TO_MiB(dimm->nr_pages), + (dimm->edac_mode != EDAC_NONE) ? "(ECC)" : ""); + edac_dbg(2, "\ttype %d, detail 0x%02x, width %d(total %d)\n", + entry->memory_type, entry->type_detail, + entry->total_width, entry->data_width); + } + + dimm_fill->count++; + } +} + +void ghes_edac_report_mem_error(struct ghes *ghes, int sev, + struct cper_sec_mem_err *mem_err) +{ + enum hw_event_mc_err_type type; + struct edac_raw_error_desc *e; + struct mem_ctl_info *mci; + struct ghes_edac_pvt *pvt = NULL; + char *p; + u8 grain_bits; + + list_for_each_entry(pvt, &ghes_reglist, list) { + if (ghes == pvt->ghes) + break; + } + if (!pvt) { + pr_err("Internal error: Can't find EDAC structure\n"); + return; + } + mci = pvt->mci; + e = &mci->error_desc; + + /* Cleans the error report buffer */ + memset(e, 0, sizeof (*e)); + e->error_count = 1; + strcpy(e->label, "unknown label"); + e->msg = pvt->msg; + e->other_detail = pvt->other_detail; + e->top_layer = -1; + e->mid_layer = -1; + e->low_layer = -1; + *pvt->other_detail = '\0'; + *pvt->msg = '\0'; + + switch (sev) { + case GHES_SEV_CORRECTED: + type = HW_EVENT_ERR_CORRECTED; + break; + case GHES_SEV_RECOVERABLE: + type = HW_EVENT_ERR_UNCORRECTED; + break; + case GHES_SEV_PANIC: + type = HW_EVENT_ERR_FATAL; + break; + default: + case GHES_SEV_NO: + type = HW_EVENT_ERR_INFO; + } + + edac_dbg(1, "error validation_bits: 0x%08llx\n", + (long long)mem_err->validation_bits); + + /* Error type, mapped on e->msg */ + if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_TYPE) { + p = pvt->msg; + switch (mem_err->error_type) { + case 0: + p += sprintf(p, "Unknown"); + break; + case 1: + p += sprintf(p, "No error"); + break; + case 2: + p += sprintf(p, "Single-bit ECC"); + break; + case 3: + p += sprintf(p, "Multi-bit ECC"); + break; + case 4: + p += sprintf(p, "Single-symbol ChipKill ECC"); + break; + case 5: + p += sprintf(p, "Multi-symbol ChipKill ECC"); + break; + case 6: + p += sprintf(p, "Master abort"); + break; + case 7: + p += sprintf(p, "Target abort"); + break; + case 8: + p += sprintf(p, "Parity Error"); + break; + case 9: + p += sprintf(p, "Watchdog timeout"); + break; + case 10: + p += sprintf(p, "Invalid address"); + break; + case 11: + p += sprintf(p, "Mirror Broken"); + break; + case 12: + p += sprintf(p, "Memory Sparing"); + break; + case 13: + p += sprintf(p, "Scrub corrected error"); + break; + case 14: + p += sprintf(p, "Scrub uncorrected error"); + break; + case 15: + p += sprintf(p, "Physical Memory Map-out event"); + break; + default: + p += sprintf(p, "reserved error (%d)", + mem_err->error_type); + } + } else { + strcpy(pvt->msg, "unknown error"); + } + + /* Error address */ + if (mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS) { + e->page_frame_number = mem_err->physical_addr >> PAGE_SHIFT; + e->offset_in_page = mem_err->physical_addr & ~PAGE_MASK; + } + + /* Error grain */ + if (mem_err->validation_bits & CPER_MEM_VALID_PHYSICAL_ADDRESS_MASK) { + e->grain = ~(mem_err->physical_addr_mask & ~PAGE_MASK); + } + + /* Memory error location, mapped on e->location */ + p = e->location; + if (mem_err->validation_bits & CPER_MEM_VALID_NODE) + p += sprintf(p, "node:%d ", mem_err->node); + if (mem_err->validation_bits & CPER_MEM_VALID_CARD) + p += sprintf(p, "card:%d ", mem_err->card); + if (mem_err->validation_bits & CPER_MEM_VALID_MODULE) + p += sprintf(p, "module:%d ", mem_err->module); + if (mem_err->validation_bits & CPER_MEM_VALID_BANK) + p += sprintf(p, "bank:%d ", mem_err->bank); + if (mem_err->validation_bits & CPER_MEM_VALID_ROW) + p += sprintf(p, "row:%d ", mem_err->row); + if (mem_err->validation_bits & CPER_MEM_VALID_COLUMN) + p += sprintf(p, "col:%d ", mem_err->column); + if (mem_err->validation_bits & CPER_MEM_VALID_BIT_POSITION) + p += sprintf(p, "bit_pos:%d ", mem_err->bit_pos); + if (p > e->location) + *(p - 1) = '\0'; + + /* All other fields are mapped on e->other_detail */ + p = pvt->other_detail; + if (mem_err->validation_bits & CPER_MEM_VALID_ERROR_STATUS) { + u64 status = mem_err->error_status; + + p += sprintf(p, "status(0x%016llx): ", (long long)status); + switch ((status >> 8) & 0xff) { + case 1: + p += sprintf(p, "Error detected internal to the component "); + break; + case 16: + p += sprintf(p, "Error detected in the bus "); + break; + case 4: + p += sprintf(p, "Storage error in DRAM memory "); + break; + case 5: + p += sprintf(p, "Storage error in TLB "); + break; + case 6: + p += sprintf(p, "Storage error in cache "); + break; + case 7: + p += sprintf(p, "Error in one or more functional units "); + break; + case 8: + p += sprintf(p, "component failed self test "); + break; + case 9: + p += sprintf(p, "Overflow or undervalue of internal queue "); + break; + case 17: + p += sprintf(p, "Virtual address not found on IO-TLB or IO-PDIR "); + break; + case 18: + p += sprintf(p, "Improper access error "); + break; + case 19: + p += sprintf(p, "Access to a memory address which is not mapped to any component "); + break; + case 20: + p += sprintf(p, "Loss of Lockstep "); + break; + case 21: + p += sprintf(p, "Response not associated with a request "); + break; + case 22: + p += sprintf(p, "Bus parity error - must also set the A, C, or D Bits "); + break; + case 23: + p += sprintf(p, "Detection of a PATH_ERROR "); + break; + case 25: + p += sprintf(p, "Bus operation timeout "); + break; + case 26: + p += sprintf(p, "A read was issued to data that has been poisoned "); + break; + default: + p += sprintf(p, "reserved "); + break; + } + } + if (mem_err->validation_bits & CPER_MEM_VALID_REQUESTOR_ID) + p += sprintf(p, "requestorID: 0x%016llx ", + (long long)mem_err->requestor_id); + if (mem_err->validation_bits & CPER_MEM_VALID_RESPONDER_ID) + p += sprintf(p, "responderID: 0x%016llx ", + (long long)mem_err->responder_id); + if (mem_err->validation_bits & CPER_MEM_VALID_TARGET_ID) + p += sprintf(p, "targetID: 0x%016llx ", + (long long)mem_err->responder_id); + if (p > pvt->other_detail) + *(p - 1) = '\0'; + + /* Generate the trace event */ + grain_bits = fls_long(e->grain); + sprintf(pvt->detail_location, "APEI location: %s %s", + e->location, e->other_detail); + trace_mc_event(type, e->msg, e->label, e->error_count, + mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer, + PAGES_TO_MiB(e->page_frame_number) | e->offset_in_page, + grain_bits, e->syndrome, pvt->detail_location); + + /* Report the error via EDAC API */ + edac_raw_mc_handle_error(type, mci, e); +} +EXPORT_SYMBOL_GPL(ghes_edac_report_mem_error); + +int ghes_edac_register(struct ghes *ghes, struct device *dev) +{ + bool fake = false; + int rc, num_dimm = 0; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[1]; + struct ghes_edac_pvt *pvt; + struct ghes_edac_dimm_fill dimm_fill; + + /* Get the number of DIMMs */ + dmi_walk(ghes_edac_count_dimms, &num_dimm); + + /* Check if we've got a bogus BIOS */ + if (num_dimm == 0) { + fake = true; + num_dimm = 1; + } + + layers[0].type = EDAC_MC_LAYER_ALL_MEM; + layers[0].size = num_dimm; + layers[0].is_virt_csrow = true; + + /* + * We need to serialize edac_mc_alloc() and edac_mc_add_mc(), + * to avoid duplicated memory controller numbers + */ + mutex_lock(&ghes_edac_lock); + mci = edac_mc_alloc(ghes_edac_mc_num, ARRAY_SIZE(layers), layers, + sizeof(*pvt)); + if (!mci) { + pr_info("Can't allocate memory for EDAC data\n"); + mutex_unlock(&ghes_edac_lock); + return -ENOMEM; + } + + pvt = mci->pvt_info; + memset(pvt, 0, sizeof(*pvt)); + list_add_tail(&pvt->list, &ghes_reglist); + pvt->ghes = ghes; + pvt->mci = mci; + mci->pdev = dev; + + mci->mtype_cap = MEM_FLAG_EMPTY; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "ghes_edac.c"; + mci->mod_ver = GHES_EDAC_REVISION; + mci->ctl_name = "ghes_edac"; + mci->dev_name = "ghes"; + + if (!ghes_edac_mc_num) { + if (!fake) { + pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n"); + pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n"); + pr_info("So, the end result of using this driver varies from vendor to vendor.\n"); + pr_info("If you find incorrect reports, please contact your hardware vendor\n"); + pr_info("to correct its BIOS.\n"); + pr_info("This system has %d DIMM sockets.\n", + num_dimm); + } else { + pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n"); + pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n"); + pr_info("work on such system. Use this driver with caution\n"); + } + } + + if (!fake) { + /* + * Fill DIMM info from DMI for the memory controller #0 + * + * Keep it in blank for the other memory controllers, as + * there's no reliable way to properly credit each DIMM to + * the memory controller, as different BIOSes fill the + * DMI bank location fields on different ways + */ + if (!ghes_edac_mc_num) { + dimm_fill.count = 0; + dimm_fill.mci = mci; + dmi_walk(ghes_edac_dmidecode, &dimm_fill); + } + } else { + struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, + mci->n_layers, 0, 0, 0); + + dimm->nr_pages = 1; + dimm->grain = 128; + dimm->mtype = MEM_UNKNOWN; + dimm->dtype = DEV_UNKNOWN; + dimm->edac_mode = EDAC_SECDED; + } + + rc = edac_mc_add_mc(mci); + if (rc < 0) { + pr_info("Can't register at EDAC core\n"); + edac_mc_free(mci); + mutex_unlock(&ghes_edac_lock); + return -ENODEV; + } + + ghes_edac_mc_num++; + mutex_unlock(&ghes_edac_lock); + return 0; +} +EXPORT_SYMBOL_GPL(ghes_edac_register); + +void ghes_edac_unregister(struct ghes *ghes) +{ + struct mem_ctl_info *mci; + struct ghes_edac_pvt *pvt, *tmp; + + list_for_each_entry_safe(pvt, tmp, &ghes_reglist, list) { + if (ghes == pvt->ghes) { + mci = pvt->mci; + edac_mc_del_mc(mci->pdev); + edac_mc_free(mci); + list_del(&pvt->list); + } + } +} +EXPORT_SYMBOL_GPL(ghes_edac_unregister); diff --git a/drivers/edac/i3200_edac.c b/drivers/edac/i3200_edac.c index 4e8337602e78..aa44c1718f50 100644 --- a/drivers/edac/i3200_edac.c +++ b/drivers/edac/i3200_edac.c @@ -106,16 +106,26 @@ static int nr_channels; static int how_many_channels(struct pci_dev *pdev) { + int n_channels; + unsigned char capid0_8b; /* 8th byte of CAPID0 */ pci_read_config_byte(pdev, I3200_CAPID0 + 8, &capid0_8b); + if (capid0_8b & 0x20) { /* check DCD: Dual Channel Disable */ edac_dbg(0, "In single channel mode\n"); - return 1; + n_channels = 1; } else { edac_dbg(0, "In dual channel mode\n"); - return 2; + n_channels = 2; } + + if (capid0_8b & 0x10) /* check if both channels are filled */ + edac_dbg(0, "2 DIMMS per channel disabled\n"); + else + edac_dbg(0, "2 DIMMS per channel enabled\n"); + + return n_channels; } static unsigned long eccerrlog_syndrome(u64 log) @@ -290,6 +300,8 @@ static void i3200_get_drbs(void __iomem *window, for (i = 0; i < I3200_RANKS_PER_CHANNEL; i++) { drbs[0][i] = readw(window + I3200_C0DRB + 2*i) & I3200_DRB_MASK; drbs[1][i] = readw(window + I3200_C1DRB + 2*i) & I3200_DRB_MASK; + + edac_dbg(0, "drb[0][%d] = %d, drb[1][%d] = %d\n", i, drbs[0][i], i, drbs[1][i]); } } @@ -311,6 +323,9 @@ static unsigned long drb_to_nr_pages( int n; n = drbs[channel][rank]; + if (!n) + return 0; + if (rank > 0) n -= drbs[channel][rank - 1]; if (stacked && (channel == 1) && @@ -377,19 +392,19 @@ static int i3200_probe1(struct pci_dev *pdev, int dev_idx) * cumulative; the last one will contain the total memory * contained in all ranks. */ - for (i = 0; i < mci->nr_csrows; i++) { + for (i = 0; i < I3200_DIMMS; i++) { unsigned long nr_pages; - struct csrow_info *csrow = mci->csrows[i]; - nr_pages = drb_to_nr_pages(drbs, stacked, - i / I3200_RANKS_PER_CHANNEL, - i % I3200_RANKS_PER_CHANNEL); + for (j = 0; j < nr_channels; j++) { + struct dimm_info *dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, + mci->n_layers, i, j, 0); - if (nr_pages == 0) - continue; + nr_pages = drb_to_nr_pages(drbs, stacked, j, i); + if (nr_pages == 0) + continue; - for (j = 0; j < nr_channels; j++) { - struct dimm_info *dimm = csrow->channels[j]->dimm; + edac_dbg(0, "csrow %d, channel %d%s, size = %ld Mb\n", i, j, + stacked ? " (stacked)" : "", PAGES_TO_MiB(nr_pages)); dimm->nr_pages = nr_pages; dimm->grain = nr_pages << PAGE_SHIFT; diff --git a/drivers/edac/i5100_edac.c b/drivers/edac/i5100_edac.c index d6955b2cc99f..1b635178cc44 100644 --- a/drivers/edac/i5100_edac.c +++ b/drivers/edac/i5100_edac.c @@ -27,6 +27,7 @@ #include <linux/edac.h> #include <linux/delay.h> #include <linux/mmzone.h> +#include <linux/debugfs.h> #include "edac_core.h" @@ -68,6 +69,14 @@ I5100_FERR_NF_MEM_M1ERR_MASK) #define I5100_NERR_NF_MEM 0xa4 /* MC Next Non-Fatal Errors */ #define I5100_EMASK_MEM 0xa8 /* MC Error Mask Register */ +#define I5100_MEM0EINJMSK0 0x200 /* Injection Mask0 Register Channel 0 */ +#define I5100_MEM1EINJMSK0 0x208 /* Injection Mask0 Register Channel 1 */ +#define I5100_MEMXEINJMSK0_EINJEN (1 << 27) +#define I5100_MEM0EINJMSK1 0x204 /* Injection Mask1 Register Channel 0 */ +#define I5100_MEM1EINJMSK1 0x206 /* Injection Mask1 Register Channel 1 */ + +/* Device 19, Function 0 */ +#define I5100_DINJ0 0x9a /* device 21 and 22, func 0 */ #define I5100_MTR_0 0x154 /* Memory Technology Registers 0-3 */ @@ -338,13 +347,26 @@ struct i5100_priv { unsigned ranksperchan; /* number of ranks per channel */ struct pci_dev *mc; /* device 16 func 1 */ + struct pci_dev *einj; /* device 19 func 0 */ struct pci_dev *ch0mm; /* device 21 func 0 */ struct pci_dev *ch1mm; /* device 22 func 0 */ struct delayed_work i5100_scrubbing; int scrub_enable; + + /* Error injection */ + u8 inject_channel; + u8 inject_hlinesel; + u8 inject_deviceptr1; + u8 inject_deviceptr2; + u16 inject_eccmask1; + u16 inject_eccmask2; + + struct dentry *debugfs; }; +static struct dentry *i5100_debugfs; + /* map a rank/chan to a slot number on the mainboard */ static int i5100_rank_to_slot(const struct mem_ctl_info *mci, int chan, int rank) @@ -863,13 +885,126 @@ static void i5100_init_csrows(struct mem_ctl_info *mci) } } +/**************************************************************************** + * Error injection routines + ****************************************************************************/ + +static void i5100_do_inject(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + u32 mask0; + u16 mask1; + + /* MEM[1:0]EINJMSK0 + * 31 - ADDRMATCHEN + * 29:28 - HLINESEL + * 00 Reserved + * 01 Lower half of cache line + * 10 Upper half of cache line + * 11 Both upper and lower parts of cache line + * 27 - EINJEN + * 25:19 - XORMASK1 for deviceptr1 + * 9:5 - SEC2RAM for deviceptr2 + * 4:0 - FIR2RAM for deviceptr1 + */ + mask0 = ((priv->inject_hlinesel & 0x3) << 28) | + I5100_MEMXEINJMSK0_EINJEN | + ((priv->inject_eccmask1 & 0xffff) << 10) | + ((priv->inject_deviceptr2 & 0x1f) << 5) | + (priv->inject_deviceptr1 & 0x1f); + + /* MEM[1:0]EINJMSK1 + * 15:0 - XORMASK2 for deviceptr2 + */ + mask1 = priv->inject_eccmask2; + + if (priv->inject_channel == 0) { + pci_write_config_dword(priv->mc, I5100_MEM0EINJMSK0, mask0); + pci_write_config_word(priv->mc, I5100_MEM0EINJMSK1, mask1); + } else { + pci_write_config_dword(priv->mc, I5100_MEM1EINJMSK0, mask0); + pci_write_config_word(priv->mc, I5100_MEM1EINJMSK1, mask1); + } + + /* Error Injection Response Function + * Intel 5100 Memory Controller Hub Chipset (318378) datasheet + * hints about this register but carry no data about them. All + * data regarding device 19 is based on experimentation and the + * Intel 7300 Chipset Memory Controller Hub (318082) datasheet + * which appears to be accurate for the i5100 in this area. + * + * The injection code don't work without setting this register. + * The register needs to be flipped off then on else the hardware + * will only preform the first injection. + * + * Stop condition bits 7:4 + * 1010 - Stop after one injection + * 1011 - Never stop injecting faults + * + * Start condition bits 3:0 + * 1010 - Never start + * 1011 - Start immediately + */ + pci_write_config_byte(priv->einj, I5100_DINJ0, 0xaa); + pci_write_config_byte(priv->einj, I5100_DINJ0, 0xab); +} + +#define to_mci(k) container_of(k, struct mem_ctl_info, dev) +static ssize_t inject_enable_write(struct file *file, const char __user *data, + size_t count, loff_t *ppos) +{ + struct device *dev = file->private_data; + struct mem_ctl_info *mci = to_mci(dev); + + i5100_do_inject(mci); + + return count; +} + +static const struct file_operations i5100_inject_enable_fops = { + .open = simple_open, + .write = inject_enable_write, + .llseek = generic_file_llseek, +}; + +static int i5100_setup_debugfs(struct mem_ctl_info *mci) +{ + struct i5100_priv *priv = mci->pvt_info; + + if (!i5100_debugfs) + return -ENODEV; + + priv->debugfs = debugfs_create_dir(mci->bus.name, i5100_debugfs); + + if (!priv->debugfs) + return -ENOMEM; + + debugfs_create_x8("inject_channel", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_channel); + debugfs_create_x8("inject_hlinesel", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_hlinesel); + debugfs_create_x8("inject_deviceptr1", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_deviceptr1); + debugfs_create_x8("inject_deviceptr2", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_deviceptr2); + debugfs_create_x16("inject_eccmask1", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_eccmask1); + debugfs_create_x16("inject_eccmask2", S_IRUGO | S_IWUSR, priv->debugfs, + &priv->inject_eccmask2); + debugfs_create_file("inject_enable", S_IWUSR, priv->debugfs, + &mci->dev, &i5100_inject_enable_fops); + + return 0; + +} + static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { int rc; struct mem_ctl_info *mci; struct edac_mc_layer layers[2]; struct i5100_priv *priv; - struct pci_dev *ch0mm, *ch1mm; + struct pci_dev *ch0mm, *ch1mm, *einj; int ret = 0; u32 dw; int ranksperch; @@ -941,6 +1076,22 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id) goto bail_disable_ch1; } + + /* device 19, func 0, Error injection */ + einj = pci_get_device_func(PCI_VENDOR_ID_INTEL, + PCI_DEVICE_ID_INTEL_5100_19, 0); + if (!einj) { + ret = -ENODEV; + goto bail_einj; + } + + rc = pci_enable_device(einj); + if (rc < 0) { + ret = rc; + goto bail_disable_einj; + } + + mci->pdev = &pdev->dev; priv = mci->pvt_info; @@ -948,6 +1099,7 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id) priv->mc = pdev; priv->ch0mm = ch0mm; priv->ch1mm = ch1mm; + priv->einj = einj; INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing); @@ -975,6 +1127,13 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id) mci->set_sdram_scrub_rate = i5100_set_scrub_rate; mci->get_sdram_scrub_rate = i5100_get_scrub_rate; + priv->inject_channel = 0; + priv->inject_hlinesel = 0; + priv->inject_deviceptr1 = 0; + priv->inject_deviceptr2 = 0; + priv->inject_eccmask1 = 0; + priv->inject_eccmask2 = 0; + i5100_init_csrows(mci); /* this strange construction seems to be in every driver, dunno why */ @@ -992,6 +1151,8 @@ static int i5100_init_one(struct pci_dev *pdev, const struct pci_device_id *id) goto bail_scrub; } + i5100_setup_debugfs(mci); + return ret; bail_scrub: @@ -999,6 +1160,12 @@ bail_scrub: cancel_delayed_work_sync(&(priv->i5100_scrubbing)); edac_mc_free(mci); +bail_disable_einj: + pci_disable_device(einj); + +bail_einj: + pci_dev_put(einj); + bail_disable_ch1: pci_disable_device(ch1mm); @@ -1030,14 +1197,18 @@ static void i5100_remove_one(struct pci_dev *pdev) priv = mci->pvt_info; + debugfs_remove_recursive(priv->debugfs); + priv->scrub_enable = 0; cancel_delayed_work_sync(&(priv->i5100_scrubbing)); pci_disable_device(pdev); pci_disable_device(priv->ch0mm); pci_disable_device(priv->ch1mm); + pci_disable_device(priv->einj); pci_dev_put(priv->ch0mm); pci_dev_put(priv->ch1mm); + pci_dev_put(priv->einj); edac_mc_free(mci); } @@ -1060,13 +1231,16 @@ static int __init i5100_init(void) { int pci_rc; - pci_rc = pci_register_driver(&i5100_driver); + i5100_debugfs = debugfs_create_dir("i5100_edac", NULL); + pci_rc = pci_register_driver(&i5100_driver); return (pci_rc < 0) ? pci_rc : 0; } static void __exit i5100_exit(void) { + debugfs_remove(i5100_debugfs); + pci_unregister_driver(&i5100_driver); } diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index e213d030b0dd..0ec3e95a12cd 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -420,21 +420,21 @@ static inline int numdimms(u32 dimms) static inline int numrank(u32 rank) { - static int ranks[4] = { 1, 2, 4, -EINVAL }; + static const int ranks[] = { 1, 2, 4, -EINVAL }; return ranks[rank & 0x3]; } static inline int numbank(u32 bank) { - static int banks[4] = { 4, 8, 16, -EINVAL }; + static const int banks[] = { 4, 8, 16, -EINVAL }; return banks[bank & 0x3]; } static inline int numrow(u32 row) { - static int rows[8] = { + static const int rows[] = { 1 << 12, 1 << 13, 1 << 14, 1 << 15, 1 << 16, -EINVAL, -EINVAL, -EINVAL, }; @@ -444,7 +444,7 @@ static inline int numrow(u32 row) static inline int numcol(u32 col) { - static int cols[8] = { + static const int cols[] = { 1 << 10, 1 << 11, 1 << 12, -EINVAL, }; return cols[col & 0x3]; diff --git a/drivers/edac/sb_edac.c b/drivers/edac/sb_edac.c index da7e2986e3d5..57244f995614 100644 --- a/drivers/edac/sb_edac.c +++ b/drivers/edac/sb_edac.c @@ -639,7 +639,7 @@ static void get_memory_layout(const struct mem_ctl_info *mci) tmp_mb = (1 + pvt->tohm) >> 20; mb = div_u64_rem(tmp_mb, 1000, &kb); - edac_dbg(0, "TOHM: %u.%03u GB (0x%016Lx)", mb, kb, (u64)pvt->tohm); + edac_dbg(0, "TOHM: %u.%03u GB (0x%016Lx)\n", mb, kb, (u64)pvt->tohm); /* * Step 2) Get SAD range and SAD Interleave list diff --git a/include/acpi/ghes.h b/include/acpi/ghes.h new file mode 100644 index 000000000000..720446cb243e --- /dev/null +++ b/include/acpi/ghes.h @@ -0,0 +1,72 @@ +#include <acpi/apei.h> +#include <acpi/hed.h> + +/* + * One struct ghes is created for each generic hardware error source. + * It provides the context for APEI hardware error timer/IRQ/SCI/NMI + * handler. + * + * estatus: memory buffer for error status block, allocated during + * HEST parsing. + */ +#define GHES_TO_CLEAR 0x0001 +#define GHES_EXITING 0x0002 + +struct ghes { + struct acpi_hest_generic *generic; + struct acpi_hest_generic_status *estatus; + u64 buffer_paddr; + unsigned long flags; + union { + struct list_head list; + struct timer_list timer; + unsigned int irq; + }; +}; + +struct ghes_estatus_node { + struct llist_node llnode; + struct acpi_hest_generic *generic; + struct ghes *ghes; +}; + +struct ghes_estatus_cache { + u32 estatus_len; + atomic_t count; + struct acpi_hest_generic *generic; + unsigned long long time_in; + struct rcu_head rcu; +}; + +enum { + GHES_SEV_NO = 0x0, + GHES_SEV_CORRECTED = 0x1, + GHES_SEV_RECOVERABLE = 0x2, + GHES_SEV_PANIC = 0x3, +}; + +/* From drivers/edac/ghes_edac.c */ + +#ifdef CONFIG_EDAC_GHES +void ghes_edac_report_mem_error(struct ghes *ghes, int sev, + struct cper_sec_mem_err *mem_err); + +int ghes_edac_register(struct ghes *ghes, struct device *dev); + +void ghes_edac_unregister(struct ghes *ghes); + +#else +static inline void ghes_edac_report_mem_error(struct ghes *ghes, int sev, + struct cper_sec_mem_err *mem_err) +{ +} + +static inline int ghes_edac_register(struct ghes *ghes, struct device *dev) +{ + return 0; +} + +static inline void ghes_edac_unregister(struct ghes *ghes) +{ +} +#endif diff --git a/include/linux/edac.h b/include/linux/edac.h index 1b8c02b36f76..4fd4999ccb5b 100644 --- a/include/linux/edac.h +++ b/include/linux/edac.h @@ -14,7 +14,6 @@ #include <linux/atomic.h> #include <linux/device.h> -#include <linux/kobject.h> #include <linux/completion.h> #include <linux/workqueue.h> #include <linux/debugfs.h> @@ -48,8 +47,17 @@ static inline void opstate_init(void) return; } +/* Max length of a DIMM label*/ #define EDAC_MC_LABEL_LEN 31 -#define MC_PROC_NAME_MAX_LEN 7 + +/* Maximum size of the location string */ +#define LOCATION_SIZE 80 + +/* Defines the maximum number of labels that can be reported */ +#define EDAC_MAX_LABELS 8 + +/* String used to join two or more labels */ +#define OTHER_LABEL " or " /** * enum dev_type - describe the type of memory DRAM chips used at the stick @@ -101,8 +109,24 @@ enum hw_event_mc_err_type { HW_EVENT_ERR_CORRECTED, HW_EVENT_ERR_UNCORRECTED, HW_EVENT_ERR_FATAL, + HW_EVENT_ERR_INFO, }; +static inline char *mc_event_error_type(const unsigned int err_type) +{ + switch (err_type) { + case HW_EVENT_ERR_CORRECTED: + return "Corrected"; + case HW_EVENT_ERR_UNCORRECTED: + return "Uncorrected"; + case HW_EVENT_ERR_FATAL: + return "Fatal"; + default: + case HW_EVENT_ERR_INFO: + return "Info"; + } +} + /** * enum mem_type - memory types. For a more detailed reference, please see * http://en.wikipedia.org/wiki/DRAM @@ -376,6 +400,9 @@ enum scrub_type { * @EDAC_MC_LAYER_CHANNEL: memory layer is named "channel" * @EDAC_MC_LAYER_SLOT: memory layer is named "slot" * @EDAC_MC_LAYER_CHIP_SELECT: memory layer is named "chip select" + * @EDAC_MC_LAYER_ALL_MEM: memory layout is unknown. All memory is mapped + * as a single memory area. This is used when + * retrieving errors from a firmware driven driver. * * This enum is used by the drivers to tell edac_mc_sysfs what name should * be used when describing a memory stick location. @@ -385,6 +412,7 @@ enum edac_mc_layer_type { EDAC_MC_LAYER_CHANNEL, EDAC_MC_LAYER_SLOT, EDAC_MC_LAYER_CHIP_SELECT, + EDAC_MC_LAYER_ALL_MEM, }; /** @@ -551,6 +579,46 @@ struct errcount_attribute_data { int layer0, layer1, layer2; }; +/** + * edac_raw_error_desc - Raw error report structure + * @grain: minimum granularity for an error report, in bytes + * @error_count: number of errors of the same type + * @top_layer: top layer of the error (layer[0]) + * @mid_layer: middle layer of the error (layer[1]) + * @low_layer: low layer of the error (layer[2]) + * @page_frame_number: page where the error happened + * @offset_in_page: page offset + * @syndrome: syndrome of the error (or 0 if unknown or if + * the syndrome is not applicable) + * @msg: error message + * @location: location of the error + * @label: label of the affected DIMM(s) + * @other_detail: other driver-specific detail about the error + * @enable_per_layer_report: if false, the error affects all layers + * (typically, a memory controller error) + */ +struct edac_raw_error_desc { + /* + * NOTE: everything before grain won't be cleaned by + * edac_raw_error_desc_clean() + */ + char location[LOCATION_SIZE]; + char label[(EDAC_MC_LABEL_LEN + 1 + sizeof(OTHER_LABEL)) * EDAC_MAX_LABELS]; + long grain; + + /* the vars below and grain will be cleaned on every new error report */ + u16 error_count; + int top_layer; + int mid_layer; + int low_layer; + unsigned long page_frame_number; + unsigned long offset_in_page; + unsigned long syndrome; + const char *msg; + const char *other_detail; + bool enable_per_layer_report; +}; + /* MEMORY controller information structure */ struct mem_ctl_info { @@ -630,7 +698,6 @@ struct mem_ctl_info { const char *mod_ver; const char *ctl_name; const char *dev_name; - char proc_name[MC_PROC_NAME_MAX_LEN + 1]; void *pvt_info; unsigned long start_time; /* mci load start time (in jiffies) */ @@ -659,6 +726,12 @@ struct mem_ctl_info { /* work struct for this MC */ struct delayed_work work; + /* + * Used to report an error - by being at the global struct + * makes the memory allocated by the EDAC core + */ + struct edac_raw_error_desc error_desc; + /* the internal state of this controller instance */ int op_state; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 31717bd287fd..f11c1c2609d5 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2802,6 +2802,7 @@ #define PCI_DEVICE_ID_INTEL_JAKETOWN_UBOX 0x3ce0 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f #define PCI_DEVICE_ID_INTEL_5100_16 0x65f0 +#define PCI_DEVICE_ID_INTEL_5100_19 0x65f3 #define PCI_DEVICE_ID_INTEL_5100_21 0x65f5 #define PCI_DEVICE_ID_INTEL_5100_22 0x65f6 #define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030 diff --git a/include/ras/ras_event.h b/include/ras/ras_event.h index 260470e72483..21cdb0b7b0fb 100644 --- a/include/ras/ras_event.h +++ b/include/ras/ras_event.h @@ -78,9 +78,7 @@ TRACE_EVENT(mc_event, TP_printk("%d %s error%s:%s%s on %s (mc:%d location:%d:%d:%d address:0x%08lx grain:%d syndrome:0x%08lx%s%s)", __entry->error_count, - (__entry->error_type == HW_EVENT_ERR_CORRECTED) ? "Corrected" : - ((__entry->error_type == HW_EVENT_ERR_FATAL) ? - "Fatal" : "Uncorrected"), + mc_event_error_type(__entry->error_type), __entry->error_count > 1 ? "s" : "", ((char *)__get_str(msg))[0] ? " " : "", __get_str(msg), |