Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux

* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux:
  i2c-stu300: off by one issue
  i2c-pnx: Add stop conditions for end of transfer
  i2c-pnx: Limit maximum divider to 1023
  i2c-omap: fix OOPS in omap_i2c_unidle() during probe
  i2c-imx: fix error handling

4 files changed, 18 insertions, 8 deletions

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index f7e27b702375..d1ff9408dc1f 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -146,10 +146,10 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 				"<%s> I2C Interrupted\n", __func__);
 			return -EINTR;
 		}
-		if (time_after(jiffies, orig_jiffies + HZ / 1000)) {
+		if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) {
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> I2C bus is busy\n", __func__);
-			return -EIO;
+			return -ETIMEDOUT;
 		}
 		schedule();
 	}
@@ -444,6 +444,8 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 			result = i2c_imx_read(i2c_imx, &msgs[i]);
 		else
 			result = i2c_imx_write(i2c_imx, &msgs[i]);
+		if (result)
+			goto fail0;
 	}
 
 fail0:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 6bd0f19cd451..389ac6032a7b 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -903,6 +903,11 @@ omap_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
+	if (cpu_is_omap7xx())
+		dev->reg_shift = 1;
+	else
+		dev->reg_shift = 2;
+
 	if ((r = omap_i2c_get_clocks(dev)) != 0)
 		goto err_iounmap;
 
@@ -926,11 +931,6 @@ omap_i2c_probe(struct platform_device *pdev)
 		dev->b_hw = 1; /* Enable hardware fixes */
 	}
 
-	if (cpu_is_omap7xx())
-		dev->reg_shift = 1;
-	else
-		dev->reg_shift = 2;
-
 	/* reset ASAP, clearing any IRQs */
 	omap_i2c_init(dev);
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 247103372a06..a97e3fec8148 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -173,6 +173,9 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
 		/* We still have something to talk about... */
 		val = *alg_data->mif.buf++;
 
+		if (alg_data->mif.len == 1)
+			val |= stop_bit;
+
 		alg_data->mif.len--;
 		iowrite32(val, I2C_REG_TX(alg_data));
 
@@ -246,6 +249,9 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
 			__func__);
 
 		if (alg_data->mif.len == 1) {
+			/* Last byte, do not acknowledge next rcv. */
+			val |= stop_bit;
+
 			/*
 			 * Enable interrupt RFDAIE (data in Rx fifo),
 			 * and disable DRMIE (need data for Tx)
@@ -633,6 +639,8 @@ static int __devinit i2c_pnx_probe(struct platform_device *pdev)
 	 */
 
 	tmp = ((freq / 1000) / I2C_PNX_SPEED_KHZ) / 2 - 2;
+	if (tmp > 0x3FF)
+		tmp = 0x3FF;
 	iowrite32(tmp, I2C_REG_CKH(alg_data));
 	iowrite32(tmp, I2C_REG_CKL(alg_data));
 
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 1f5b38be73bc..495be451d326 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -498,7 +498,7 @@ static int stu300_set_clk(struct stu300_dev *dev, unsigned long clkrate)
 	int i = 0;
 
 	/* Locate the apropriate clock setting */
-	while (i < ARRAY_SIZE(stu300_clktable) &&
+	while (i < ARRAY_SIZE(stu300_clktable) - 1 &&
 	       stu300_clktable[i].rate < clkrate)
 		i++;