Merge tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are a handful of char/misc driver fixes for 4.16-rc3.

  There are some binder driver fixes to resolve reported issues in
  stress testing the recent binder changes, some extcon driver fixes,
  and a few mei driver fixes and new device ids.

  All of these, with the exception of the mei driver id additions, have
  been in linux-next for a while. I forgot to push out the mei driver id
  additions to kernel.org until today, but all build tests pass with
  them enabled"

* tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  mei: me: add cannon point device ids for 4th device
  mei: me: add cannon point device ids
  mei: set device client to the disconnected state upon suspend.
  ANDROID: binder: synchronize_rcu() when using POLLFREE.
  binder: replace "%p" with "%pK"
  ANDROID: binder: remove WARN() for redundant txn error
  binder: check for binder_thread allocation failure in binder_poll()
  extcon: int3496: process id-pin first so that we start with the right status
  Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()"
  extcon: axp288: Constify the axp288_pwr_up_down_info array

7 files changed, 45 insertions, 45 deletions

diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index 15e3d3c2260d..764b63a5aade 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1991,8 +1991,14 @@ static void binder_send_failed_reply(struct binder_transaction *t,
 					&target_thread->reply_error.work);
 				wake_up_interruptible(&target_thread->wait);
 			} else {
-				WARN(1, "Unexpected reply error: %u\n",
-						target_thread->reply_error.cmd);
+				/*
+				 * Cannot get here for normal operation, but
+				 * we can if multiple synchronous transactions
+				 * are sent without blocking for responses.
+				 * Just ignore the 2nd error in this case.
+				 */
+				pr_warn("Unexpected reply error: %u\n",
+					target_thread->reply_error.cmd);
 			}
 			binder_inner_proc_unlock(target_thread->proc);
 			binder_thread_dec_tmpref(target_thread);
@@ -2193,7 +2199,7 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
 	int debug_id = buffer->debug_id;
 
 	binder_debug(BINDER_DEBUG_TRANSACTION,
-		     "%d buffer release %d, size %zd-%zd, failed at %p\n",
+		     "%d buffer release %d, size %zd-%zd, failed at %pK\n",
 		     proc->pid, buffer->debug_id,
 		     buffer->data_size, buffer->offsets_size, failed_at);
 
@@ -3705,7 +3711,7 @@ static int binder_thread_write(struct binder_proc *proc,
 				}
 			}
 			binder_debug(BINDER_DEBUG_DEAD_BINDER,
-				     "%d:%d BC_DEAD_BINDER_DONE %016llx found %p\n",
+				     "%d:%d BC_DEAD_BINDER_DONE %016llx found %pK\n",
 				     proc->pid, thread->pid, (u64)cookie,
 				     death);
 			if (death == NULL) {
@@ -4376,6 +4382,15 @@ static int binder_thread_release(struct binder_proc *proc,
 
 	binder_inner_proc_unlock(thread->proc);
 
+	/*
+	 * This is needed to avoid races between wake_up_poll() above and
+	 * and ep_remove_waitqueue() called for other reasons (eg the epoll file
+	 * descriptor being closed); ep_remove_waitqueue() holds an RCU read
+	 * lock, so we can be sure it's done after calling synchronize_rcu().
+	 */
+	if (thread->looper & BINDER_LOOPER_STATE_POLL)
+		synchronize_rcu();
+
 	if (send_reply)
 		binder_send_failed_reply(send_reply, BR_DEAD_REPLY);
 	binder_release_work(proc, &thread->todo);
@@ -4391,6 +4406,8 @@ static __poll_t binder_poll(struct file *filp,
 	bool wait_for_proc_work;
 
 	thread = binder_get_thread(proc);
+	if (!thread)
+		return POLLERR;
 
 	binder_inner_proc_lock(thread->proc);
 	thread->looper |= BINDER_LOOPER_STATE_POLL;
@@ -5034,7 +5051,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m,
 	spin_lock(&t->lock);
 	to_proc = t->to_proc;
 	seq_printf(m,
-		   "%s %d: %p from %d:%d to %d:%d code %x flags %x pri %ld r%d",
+		   "%s %d: %pK from %d:%d to %d:%d code %x flags %x pri %ld r%d",
 		   prefix, t->debug_id, t,
 		   t->from ? t->from->proc->pid : 0,
 		   t->from ? t->from->pid : 0,
@@ -5058,7 +5075,7 @@ static void print_binder_transaction_ilocked(struct seq_file *m,
 	}
 	if (buffer->target_node)
 		seq_printf(m, " node %d", buffer->target_node->debug_id);
-	seq_printf(m, " size %zd:%zd data %p\n",
+	seq_printf(m, " size %zd:%zd data %pK\n",
 		   buffer->data_size, buffer->offsets_size,
 		   buffer->data);
 }
diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c
index 0a44d43802fe..3ec4c715e240 100644
--- a/drivers/extcon/extcon-axp288.c
+++ b/drivers/extcon/extcon-axp288.c
@@ -1,7 +1,6 @@
 /*
  * extcon-axp288.c - X-Power AXP288 PMIC extcon cable detection driver
  *
- * Copyright (C) 2016-2017 Hans de Goede <hdegoede@redhat.com>
  * Copyright (C) 2015 Intel Corporation
  * Author: Ramakrishna Pallala <ramakrishna.pallala@intel.com>
  *
@@ -98,15 +97,13 @@ struct axp288_extcon_info {
 	struct device *dev;
 	struct regmap *regmap;
 	struct regmap_irq_chip_data *regmap_irqc;
-	struct delayed_work det_work;
 	int irq[EXTCON_IRQ_END];
 	struct extcon_dev *edev;
 	unsigned int previous_cable;
-	bool first_detect_done;
 };
 
 /* Power up/down reason string array */
-static char *axp288_pwr_up_down_info[] = {
+static const char * const axp288_pwr_up_down_info[] = {
 	"Last wake caused by user pressing the power button",
 	"Last wake caused by a charger insertion",
 	"Last wake caused by a battery insertion",
@@ -124,7 +121,7 @@ static char *axp288_pwr_up_down_info[] = {
  */
 static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
 {
-	char **rsi;
+	const char * const *rsi;
 	unsigned int val, i, clear_mask = 0;
 	int ret;
 
@@ -140,25 +137,6 @@ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info)
 	regmap_write(info->regmap, AXP288_PS_BOOT_REASON_REG, clear_mask);
 }
 
-static void axp288_chrg_detect_complete(struct axp288_extcon_info *info)
-{
-	/*
-	 * We depend on other drivers to do things like mux the data lines,
-	 * enable/disable vbus based on the id-pin, etc. Sometimes the BIOS has
-	 * not set these things up correctly resulting in the initial charger
-	 * cable type detection giving a wrong result and we end up not charging
-	 * or charging at only 0.5A.
-	 *
-	 * So we schedule a second cable type detection after 2 seconds to
-	 * give the other drivers time to load and do their thing.
-	 */
-	if (!info->first_detect_done) {
-		queue_delayed_work(system_wq, &info->det_work,
-				   msecs_to_jiffies(2000));
-		info->first_detect_done = true;
-	}
-}
-
 static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info)
 {
 	int ret, stat, cfg, pwr_stat;
@@ -223,8 +201,6 @@ no_vbus:
 		info->previous_cable = cable;
 	}
 
-	axp288_chrg_detect_complete(info);
-
 	return 0;
 
 dev_det_ret:
@@ -246,11 +222,8 @@ static irqreturn_t axp288_extcon_isr(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static void axp288_extcon_det_work(struct work_struct *work)
+static void axp288_extcon_enable(struct axp288_extcon_info *info)
 {
-	struct axp288_extcon_info *info =
-		container_of(work, struct axp288_extcon_info, det_work.work);
-
 	regmap_update_bits(info->regmap, AXP288_BC_GLOBAL_REG,
 						BC_GLOBAL_RUN, 0);
 	/* Enable the charger detection logic */
@@ -272,7 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	info->regmap = axp20x->regmap;
 	info->regmap_irqc = axp20x->regmap_irqc;
 	info->previous_cable = EXTCON_NONE;
-	INIT_DELAYED_WORK(&info->det_work, axp288_extcon_det_work);
 
 	platform_set_drvdata(pdev, info);
 
@@ -318,7 +290,7 @@ static int axp288_extcon_probe(struct platform_device *pdev)
 	}
 
 	/* Start charger cable type detection */
-	queue_delayed_work(system_wq, &info->det_work, 0);
+	axp288_extcon_enable(info);
 
 	return 0;
 }
diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c
index c8691b5a9cb0..191e99f06a9a 100644
--- a/drivers/extcon/extcon-intel-int3496.c
+++ b/drivers/extcon/extcon-intel-int3496.c
@@ -153,8 +153,9 @@ static int int3496_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	/* queue initial processing of id-pin */
+	/* process id-pin so that we start with the right status */
 	queue_delayed_work(system_wq, &data->work, 0);
+	flush_delayed_work(&data->work);
 
 	platform_set_drvdata(pdev, data);
 
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index 3e5eabdae8d9..772d02922529 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -548,12 +548,6 @@ int mei_cldev_disable(struct mei_cl_device *cldev)
 		goto out;
 	}
 
-	if (bus->dev_state == MEI_DEV_POWER_DOWN) {
-		dev_dbg(bus->dev, "Device is powering down, don't bother with disconnection\n");
-		err = 0;
-		goto out;
-	}
-
 	err = mei_cl_disconnect(cl);
 	if (err < 0)
 		dev_err(bus->dev, "Could not disconnect from the ME client\n");
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index be64969d986a..7e60c1817c31 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -945,6 +945,12 @@ int mei_cl_disconnect(struct mei_cl *cl)
 		return 0;
 	}
 
+	if (dev->dev_state == MEI_DEV_POWER_DOWN) {
+		cl_dbg(dev, cl, "Device is powering down, don't bother with disconnection\n");
+		mei_cl_set_disconnected(cl);
+		return 0;
+	}
+
 	rets = pm_runtime_get(dev->dev);
 	if (rets < 0 && rets != -EINPROGRESS) {
 		pm_runtime_put_noidle(dev->dev);
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 0ccccbaf530d..e4b10b2d1a08 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -132,6 +132,11 @@
 #define MEI_DEV_ID_KBP        0xA2BA  /* Kaby Point */
 #define MEI_DEV_ID_KBP_2      0xA2BB  /* Kaby Point 2 */
 
+#define MEI_DEV_ID_CNP_LP     0x9DE0  /* Cannon Point LP */
+#define MEI_DEV_ID_CNP_LP_4   0x9DE4  /* Cannon Point LP 4 (iTouch) */
+#define MEI_DEV_ID_CNP_H      0xA360  /* Cannon Point H */
+#define MEI_DEV_ID_CNP_H_4    0xA364  /* Cannon Point H 4 (iTouch) */
+
 /*
  * MEI HW Section
  */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 4a0ccda4d04b..ea4e152270a3 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -98,6 +98,11 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
 	{MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)},
 	{MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)},
 
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH8_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_4, MEI_ME_PCH8_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH8_CFG)},
+	{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_4, MEI_ME_PCH8_CFG)},
+
 	/* required last entry */
 	{0, }
 };