diff options
author | Johannes Berg | 2012-01-19 09:29:57 +0100 |
---|---|---|
committer | John W. Linville | 2012-01-27 14:56:53 -0500 |
commit | c1288b1278d00169e12495eb53ad128e09560b69 (patch) | |
tree | 8edc1a74f040763f406abe830cea98eac4b6124d | |
parent | 47d505ccc7535c825f6b28aaaf105d4b75f25196 (diff) |
mac80211: make beacon filtering per virtual interface
Due to firmware limitations, we may not be able to
support beacon filtering on all virtual interfaces.
To allow this in mac80211, introduce per-interface
driver capability flags that the driver sets when
an interface is added.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
-rw-r--r-- | drivers/net/wireless/p54/main.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/rtlwifi/base.c | 1 | ||||
-rw-r--r-- | drivers/net/wireless/rtlwifi/core.c | 2 | ||||
-rw-r--r-- | drivers/net/wireless/wl1251/main.c | 3 | ||||
-rw-r--r-- | drivers/net/wireless/wl12xx/main.c | 3 | ||||
-rw-r--r-- | include/net/mac80211.h | 29 | ||||
-rw-r--r-- | net/mac80211/debugfs.c | 2 | ||||
-rw-r--r-- | net/mac80211/mlme.c | 2 |
8 files changed, 29 insertions, 16 deletions
diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index af2ca1a9c7d3..40f4eb7da7b2 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -228,6 +228,8 @@ static int p54_add_interface(struct ieee80211_hw *dev, { struct p54_common *priv = dev->priv; + vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; + mutex_lock(&priv->conf_mutex); if (priv->mode != NL80211_IFTYPE_MONITOR) { mutex_unlock(&priv->conf_mutex); @@ -734,7 +736,6 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | - IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_REPORTS_TX_ACK_STATUS; dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 6f80142580fd..ff3e393bc104 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -309,7 +309,6 @@ static void _rtl_init_mac80211(struct ieee80211_hw *hw) /* <5> set hw caps */ hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_CONNECTION_MONITOR | /* IEEE80211_HW_SUPPORTS_CQM_RSSI | */ diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index d6e37e6a1d53..0ee01ab2e4f6 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -112,6 +112,8 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw, struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); int err = 0; + vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; + if (mac->vif) { RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, "vif has been set!! mac->vif = 0x%p\n", mac->vif); diff --git a/drivers/net/wireless/wl1251/main.c b/drivers/net/wireless/wl1251/main.c index ba3268ea81fe..86540db6f1a8 100644 --- a/drivers/net/wireless/wl1251/main.c +++ b/drivers/net/wireless/wl1251/main.c @@ -514,6 +514,8 @@ static int wl1251_op_add_interface(struct ieee80211_hw *hw, struct wl1251 *wl = hw->priv; int ret = 0; + vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; + wl1251_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", vif->type, vif->addr); @@ -1338,7 +1340,6 @@ int wl1251_init_ieee80211(struct wl1251 *wl) wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_PS | - IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_SUPPORTS_UAPSD | IEEE80211_HW_SUPPORTS_CQM_RSSI; diff --git a/drivers/net/wireless/wl12xx/main.c b/drivers/net/wireless/wl12xx/main.c index d5f55a149de5..afc5381f2870 100644 --- a/drivers/net/wireless/wl12xx/main.c +++ b/drivers/net/wireless/wl12xx/main.c @@ -2060,6 +2060,8 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, u8 role_type; bool booted = false; + vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER; + wl1271_debug(DEBUG_MAC80211, "mac80211 add interface type %d mac %pM", ieee80211_vif_type_p2p(vif), vif->addr); @@ -4898,7 +4900,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval; wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_UAPSD | IEEE80211_HW_HAS_RATE_CONTROL | diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d49928ba5d09..ae8db247bdeb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -852,6 +852,16 @@ struct ieee80211_channel_switch { }; /** + * enum ieee80211_vif_flags - virtual interface flags + * + * @IEEE80211_VIF_BEACON_FILTER: the device performs beacon filtering + * on this virtual interface to avoid unnecessary CPU wakeups + */ +enum ieee80211_vif_flags { + IEEE80211_VIF_BEACON_FILTER = BIT(0), +}; + +/** * struct ieee80211_vif - per-interface data * * Data in this structure is continually present for driver @@ -863,6 +873,10 @@ struct ieee80211_channel_switch { * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively + * @driver_flags: flags/capabilities the driver has for this interface, + * these need to be set (or cleared) when the interface is added + * or, if supported by the driver, the interface type is changed + * at runtime, mac80211 will never touch this field * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *). */ @@ -871,6 +885,7 @@ struct ieee80211_vif { struct ieee80211_bss_conf bss_conf; u8 addr[ETH_ALEN]; bool p2p; + u32 driver_flags; /* must be last */ u8 drv_priv[0] __attribute__((__aligned__(sizeof(void *)))); }; @@ -1079,10 +1094,6 @@ enum sta_notify_cmd { * @IEEE80211_HW_MFP_CAPABLE: * Hardware supports management frame protection (MFP, IEEE 802.11w). * - * @IEEE80211_HW_BEACON_FILTER: - * Hardware supports dropping of irrelevant beacon frames to - * avoid waking up cpu. - * * @IEEE80211_HW_SUPPORTS_STATIC_SMPS: * Hardware supports static spatial multiplexing powersave, * ie. can turn off all but one chain even on HT connections @@ -1150,7 +1161,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_PS_NULLFUNC_STACK = 1<<11, IEEE80211_HW_SUPPORTS_DYNAMIC_PS = 1<<12, IEEE80211_HW_MFP_CAPABLE = 1<<13, - IEEE80211_HW_BEACON_FILTER = 1<<14, + /* reuse bit 14 */ IEEE80211_HW_SUPPORTS_STATIC_SMPS = 1<<15, IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS = 1<<16, IEEE80211_HW_SUPPORTS_UAPSD = 1<<17, @@ -1446,8 +1457,8 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * way the host will only receive beacons where some relevant information * (for example ERP protection or WMM settings) have changed. * - * Beacon filter support is advertised with the %IEEE80211_HW_BEACON_FILTER - * hardware capability. The driver needs to enable beacon filter support + * Beacon filter support is advertised with the %IEEE80211_VIF_BEACON_FILTER + * interface capability. The driver needs to enable beacon filter support * whenever power save is enabled, that is %IEEE80211_CONF_PS is set. When * power save is enabled, the stack will not check for beacon loss and the * driver needs to notify about loss of beacons with ieee80211_beacon_loss(). @@ -3316,7 +3327,7 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER and * %IEEE80211_CONF_PS is set, the driver needs to inform whenever the * hardware is not receiving beacons with this function. */ @@ -3327,7 +3338,7 @@ void ieee80211_beacon_loss(struct ieee80211_vif *vif); * * @vif: &struct ieee80211_vif pointer from the add_interface callback. * - * When beacon filtering is enabled with %IEEE80211_HW_BEACON_FILTER, and + * When beacon filtering is enabled with %IEEE80211_VIF_BEACON_FILTER, and * %IEEE80211_CONF_PS and %IEEE80211_HW_CONNECTION_MONITOR are set, the driver * needs to inform if the connection to the AP has been lost. * diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 90baea53e7c5..e8868dae1c01 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -247,8 +247,6 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_DYNAMIC_PS\n"); if (local->hw.flags & IEEE80211_HW_MFP_CAPABLE) sf += snprintf(buf + sf, mxln - sf, "MFP_CAPABLE\n"); - if (local->hw.flags & IEEE80211_HW_BEACON_FILTER) - sf += snprintf(buf + sf, mxln - sf, "BEACON_FILTER\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_STATIC_SMPS) sf += snprintf(buf + sf, mxln - sf, "SUPPORTS_STATIC_SMPS\n"); if (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 95d3964fc080..b51eb49d8525 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -127,7 +127,7 @@ static void run_again(struct ieee80211_if_managed *ifmgd, void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) { - if (sdata->local->hw.flags & IEEE80211_HW_BEACON_FILTER) + if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) return; mod_timer(&sdata->u.mgd.bcn_mon_timer, |