Merge tag 'iio-for-4.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing

Jonathan writes:

First round of new features, device support and cleanups for IIO in the 4.9 cycle.

Device support

* ak8974
  - New driver and bindings for this 2009 vintage magnetometer (it was very
    popular back then!)
* atlas-ph-sensor
  -  ORP sensor support(I had to look up what one of these was)
* cio-dac
  - New driver for Measurement Computing DAC boards
* dmard06
  - New driver for Domintech DMARDO6 accelerometer. Also vendor prefix.
* dmard09
  - New driver for Domintech DMARD09 accelerometer.
* maxim-thermocouple
  - max6675 and max31855 new driver
* mt6577 auxdac
  - new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this
    hardware.
* ti-adc161s626
  - new driver for this TI single channel differential ADC.
* vcnl4000
  - support vcnl4010 and vcnl4020 which are compatible for all features
    currently supported by this driver.

New features

* Core
  - Allow retrieving of underlying iio_dev from a callback buffer handle.
    This is needed to allow client drivers to perform operations such as
    configuring the trigger used.
* hid-sensors
  - asynchronous resume support to avoid really long resume times.
* kxcjk-1013
  - add the mysterious KIOX000A ACPI id seen in the wild.
* Tools
  - lsiio now enumerates processed as well as raw channels.

Cleanup

* ad7298
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
* ad7793
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
* ade7854
  - checkpatch fixups (alignment of parameters)
* atlas-ph-sensor
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
  - Switch to REGCACHE_NONE as there are no useful register to cache.
* bma180
  - use iio_device_claim_direct_mode and friends to simplify locking around
    mode switching and drop some boilerplate.
* hdc100x
  - Add mention of the HDC1000 and HDC1008 to the Kconfig help text.
* isl29018
  - Add driver specific prefixes to defines and function names.
  - Remove excessive logging.
  - Drop newlines which add nothing to readability.
  - General tidying up of comments.
  - Drop I2C_CLASS_HWMON as irrelevant to driver.
* isl29028
  - Add driver specific prefixes to defines, enums and function names.
  - Drop comma's from available attribute output as not ABI compliant.
  - Drop I2C_CLASS_HWMON as irrelevant to driver.
* kxsd9
  - devicetree bindings.
* mag3110
  - This one wasn't locking to protect against mode switches during
    raw_reads.  Use the iio_claim_direct_mode function to fix this buglet.
* maxim-theromcouple
  - Fix missing selects for triggered buffer support in Kconfig.
* nau7802
  - Use complete instead of complete_all as only one completion at a time.
* sx9500
  - Use complete instead of complete_all as only one completion at a time.
* us5182d
  - Add a missing error code asignment instead of checking the result of
    an already checked statement.
* vcnl4000
  - Use BIT macro where appropriate.
  - Refactor return codes in read_raw callback.
  - Add some missing locking for concurrent accesses to the device.

49 files changed, 2816 insertions, 273 deletions

diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
index 5c70ce9c1954..310b1bbef5fc 100644
--- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt
+++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt
@@ -38,6 +38,7 @@ dallas,ds4510		CPU Supervisor with Nonvolatile Memory and Programmable I/O
 dallas,ds75		Digital Thermometer and Thermostat
 dlg,da9053		DA9053: flexible system level PMIC with multicore support
 dlg,da9063		DA9063: system PMIC for quad-core application processors
+domintech,dmard09	DMARD09: 3-axis Accelerometer
 epson,rx8010		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
 epson,rx8025		High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE
 epson,rx8581		I2C-BUS INTERFACE REAL TIME CLOCK MODULE
diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt
new file mode 100644
index 000000000000..ce105a12c645
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt
@@ -0,0 +1,19 @@
+Device tree bindings for Domintech DMARD05, DMARD06, DMARD07 accelerometers
+
+Required properties:
+ - compatible		: Should be "domintech,dmard05"
+				 or "domintech,dmard06"
+				 or "domintech,dmard07"
+ - reg			: I2C address of the chip. Should be 0x1c
+
+Example:
+	&i2c1 {
+		/* ... */
+
+		accelerometer@1c {
+			compatible = "domintech,dmard06";
+			reg = <0x1c>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.txt
new file mode 100644
index 000000000000..b25bf3a77e0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.txt
@@ -0,0 +1,22 @@
+Kionix KXSD9 Accelerometer device tree bindings
+
+Required properties:
+ - compatible: 		should be set to "kionix,kxsd9"
+ - reg:			i2c slave address
+
+Optional properties:
+ - vdd-supply:		The input supply for VDD
+ - iovdd-supply:	The input supply for IOVDD
+ - interrupts:		The movement detection interrupt
+ - mount-matrix:	See mount-matrix.txt
+
+Example:
+
+kxsd9@18 {
+	compatible = "kionix,kxsd9";
+	reg = <0x18>;
+	interrupt-parent = <&foo>;
+	interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+	iovdd-supply = <&bar>;
+	vdd-supply = <&baz>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
new file mode 100644
index 000000000000..68c45cbbe3d9
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt
@@ -0,0 +1,29 @@
+* Mediatek AUXADC - Analog to Digital Converter on Mediatek mobile soc (mt65xx/mt81xx/mt27xx)
+===============
+
+The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
+in some Mediatek SoCs which among other things measures the temperatures
+in the SoC. It can be used directly with register accesses, but it is also
+used by thermal controller which reads the temperatures from the AUXADC
+directly via its own bus interface. See
+Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+for the Thermal Controller which holds a phandle to the AUXADC.
+
+Required properties:
+  - compatible: Should be one of:
+    - "mediatek,mt2701-auxadc": For MT2701 family of SoCs
+    - "mediatek,mt8173-auxadc": For MT8173 family of SoCs
+  - reg: Address range of the AUXADC unit.
+  - clocks: Should contain a clock specifier for each entry in clock-names
+  - clock-names: Should contain "main".
+  - #io-channel-cells: Should be 1, see ../iio-bindings.txt
+
+Example:
+
+auxadc: adc@11001000 {
+	compatible = "mediatek,mt2701-auxadc";
+	reg = <0 0x11001000 0 0x1000>;
+	clocks = <&pericfg CLK_PERI_AUXADC>;
+	clock-names = "main";
+	#io-channel-cells = <1>;
+};
diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
new file mode 100644
index 000000000000..9ed2315781e4
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
@@ -0,0 +1,16 @@
+* Texas Instruments ADC141S626 and ADC161S626 chips
+
+Required properties:
+ - compatible: Should be "ti,adc141s626" or "ti,adc161s626"
+ - reg: spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency: Definition as per
+		Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+adc@0 {
+	compatible = "ti,adc161s626";
+	reg = <0>;
+	spi-max-frequency = <4300000>;
+};
diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
new file mode 100644
index 000000000000..5d8b687d5edc
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/chemical/atlas,orp-sm.txt
@@ -0,0 +1,22 @@
+* Atlas Scientific ORP-SM OEM sensor
+
+https://www.atlas-scientific.com/_files/_datasheets/_oem/ORP_oem_datasheet.pdf
+
+Required properties:
+
+  - compatible: must be "atlas,orp-sm"
+  - reg: the I2C address of the sensor
+  - interrupt-parent: should be the phandle for the interrupt controller
+  - interrupts: the sole interrupt generated by the device
+
+  Refer to interrupt-controller/interrupts.txt for generic interrupt client
+  node bindings.
+
+Example:
+
+atlas@66 {
+	compatible = "atlas,orp-sm";
+	reg = <0x66>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <16 2>;
+};
diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
new file mode 100644
index 000000000000..77d5aba1bd8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt
@@ -0,0 +1,29 @@
+* Asahi Kasei AK8974 magnetometer sensor
+
+Required properties:
+
+- compatible : should be "asahi-kasei,ak8974"
+- reg : the I2C address of the magnetometer
+
+Optional properties:
+
+- avdd-supply: regulator supply for the analog voltage
+  (see regulator/regulator.txt)
+- dvdd-supply: regulator supply for the digital voltage
+  (see regulator/regulator.txt)
+- interrupts: data ready (DRDY) and interrupt (INT1) lines
+  from the chip, the DRDY interrupt must be placed first.
+  The interrupts can be triggered on rising or falling
+  edges alike.
+- mount-matrix: an optional 3x3 mounting rotation matrix
+
+Example:
+
+ak8974@0f {
+	compatible = "asahi-kasei,ak8974";
+	reg = <0x0f>;
+	avdd-supply = <&foo_reg>;
+	dvdd-supply = <&bar_reg>;
+	interrupts = <0 IRQ_TYPE_EDGE_RISING>,
+		     <1 IRQ_TYPE_EDGE_RISING>;
+};
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
new file mode 100644
index 000000000000..28bc5c4d965b
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim_thermocouple.txt
@@ -0,0 +1,21 @@
+Maxim thermocouple support
+
+* https://datasheets.maximintegrated.com/en/ds/MAX6675.pdf
+* https://datasheets.maximintegrated.com/en/ds/MAX31855.pdf
+
+Required properties:
+
+	- compatible: must be "maxim,max31855" or "maxim,max6675"
+	- reg: SPI chip select number for the device
+	- spi-max-frequency: must be 4300000
+	- spi-cpha: must be defined for max6675 to enable SPI mode 1
+
+	Refer to spi/spi-bus.txt for generic SPI slave bindings.
+
+Example:
+
+	max31855@0 {
+		compatible = "maxim,max31855";
+		reg = <0>;
+		spi-max-frequency = <4300000>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt b/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt
deleted file mode 100644
index bdb782918a72..000000000000
--- a/Documentation/devicetree/bindings/soc/mediatek/auxadc.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-MediaTek AUXADC
-===============
-
-The Auxiliary Analog/Digital Converter (AUXADC) is an ADC found
-in some Mediatek SoCs which among other things measures the temperatures
-in the SoC. It can be used directly with register accesses, but it is also
-used by thermal controller which reads the temperatures from the AUXADC
-directly via its own bus interface. See
-Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
-for the Thermal Controller which holds a phandle to the AUXADC.
-
-Required properties:
-- compatible: Must be "mediatek,mt8173-auxadc"
-- reg: Address range of the AUXADC unit
-
-Example:
-
-auxadc: auxadc@11001000 {
-	compatible = "mediatek,mt8173-auxadc";
-	reg = <0 0x11001000 0 0x1000>;
-};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 1992aa97d45a..0d9d4d80479c 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -75,6 +75,7 @@ digilent	Diglent, Inc.
 dlg	Dialog Semiconductor
 dlink	D-Link Corporation
 dmo	Data Modul AG
+domintech	Domintech Co., Ltd.
 dptechnics	DPTechnics
 dragino	Dragino Technology Co., Limited
 ea	Embedded Artists AB
diff --git a/MAINTAINERS b/MAINTAINERS
index f277cfd3dcfb..ae09eb4f4a76 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1965,6 +1965,13 @@ S:	Maintained
 F:	drivers/media/i2c/as3645a.c
 F:	include/media/i2c/as3645a.h
 
+ASAHI KASEI AK8974 DRIVER
+M:	Linus Walleij <linus.walleij@linaro.org>
+L:	linux-iio@vger.kernel.org
+W:	http://www.akm.com/
+S:	Supported
+F:	drivers/iio/magnetometer/ak8974.c
+
 ASC7621 HARDWARE MONITOR DRIVER
 M:	George Joseph <george.joseph@fairview5.com>
 L:	linux-hwmon@vger.kernel.org
@@ -7497,6 +7504,12 @@ L:	linux-iio@vger.kernel.org
 S:	Maintained
 F:	drivers/iio/potentiometer/mcp4531.c
 
+MEASUREMENT COMPUTING CIO-DAC IIO DRIVER
+M:	William Breathitt Gray <vilhelm.gray@gmail.com>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	drivers/iio/dac/cio-dac.c
+
 MEDIA DRIVERS FOR RENESAS - FCP
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 L:	linux-media@vger.kernel.org
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 89d78208de3f..5630f2316c58 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -50,6 +50,27 @@ config BMC150_ACCEL_SPI
 	tristate
 	select REGMAP_SPI
 
+config DMARD06
+	tristate "Domintech DMARD06 Digital Accelerometer Driver"
+	depends on OF || COMPILE_TEST
+	depends on I2C
+	help
+	  Say yes here to build support for the Domintech low-g tri-axial
+	  digital accelerometers: DMARD05, DMARD06, DMARD07.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dmard06.
+
+config DMARD09
+	tristate "Domintech DMARD09 3-axis Accelerometer Driver"
+	depends on I2C
+	help
+	  Say yes here to get support for the Domintech DMARD09 3-axis
+	  accelerometer.
+
+	  Choosing M will build the driver as a module. If so, the module
+	  will be called dmard09.
+
 config HID_SENSOR_ACCEL_3D
 	depends on HID_SENSOR_HUB
 	select IIO_BUFFER
diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
index 6cedbecca2ee..e974841ec9cf 100644
--- a/drivers/iio/accel/Makefile
+++ b/drivers/iio/accel/Makefile
@@ -8,6 +8,8 @@ obj-$(CONFIG_BMA220) += bma220_spi.o
 obj-$(CONFIG_BMC150_ACCEL) += bmc150-accel-core.o
 obj-$(CONFIG_BMC150_ACCEL_I2C) += bmc150-accel-i2c.o
 obj-$(CONFIG_BMC150_ACCEL_SPI) += bmc150-accel-spi.o
+obj-$(CONFIG_DMARD06)	+= dmard06.o
+obj-$(CONFIG_DMARD09)	+= dmard09.o
 obj-$(CONFIG_HID_SENSOR_ACCEL_3D) += hid-sensor-accel-3d.o
 obj-$(CONFIG_KXCJK1013) += kxcjk-1013.o
 obj-$(CONFIG_KXSD9)	+= kxsd9.o
diff --git a/drivers/iio/accel/bma180.c b/drivers/iio/accel/bma180.c
index e3f88ba5faf3..0890934ef66f 100644
--- a/drivers/iio/accel/bma180.c
+++ b/drivers/iio/accel/bma180.c
@@ -469,13 +469,14 @@ static int bma180_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
 		mutex_lock(&data->mutex);
-		if (iio_buffer_enabled(indio_dev)) {
-			mutex_unlock(&data->mutex);
-			return -EBUSY;
-		}
 		ret = bma180_get_data_reg(data, chan->scan_index);
 		mutex_unlock(&data->mutex);
+		iio_device_release_direct_mode(indio_dev);
 		if (ret < 0)
 			return ret;
 		*val = sign_extend32(ret >> chan->scan_type.shift,
diff --git a/drivers/iio/accel/dmard06.c b/drivers/iio/accel/dmard06.c
new file mode 100644
index 000000000000..656ca8e1927f
--- /dev/null
+++ b/drivers/iio/accel/dmard06.c
@@ -0,0 +1,241 @@
+/*
+ * IIO driver for Domintech DMARD06 accelerometer
+ *
+ * Copyright (C) 2016 Aleksei Mamlin <mamlinav@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#define DMARD06_DRV_NAME		"dmard06"
+
+/* Device data registers */
+#define DMARD06_CHIP_ID_REG		0x0f
+#define DMARD06_TOUT_REG		0x40
+#define DMARD06_XOUT_REG		0x41
+#define DMARD06_YOUT_REG		0x42
+#define DMARD06_ZOUT_REG		0x43
+#define DMARD06_CTRL1_REG		0x44
+
+/* Device ID value */
+#define DMARD05_CHIP_ID			0x05
+#define DMARD06_CHIP_ID			0x06
+#define DMARD07_CHIP_ID			0x07
+
+/* Device values */
+#define DMARD05_AXIS_SCALE_VAL		15625
+#define DMARD06_AXIS_SCALE_VAL		31250
+#define DMARD06_TEMP_CENTER_VAL		25
+#define DMARD06_SIGN_BIT		7
+
+/* Device power modes */
+#define DMARD06_MODE_NORMAL		0x27
+#define DMARD06_MODE_POWERDOWN		0x00
+
+/* Device channels */
+#define DMARD06_ACCEL_CHANNEL(_axis, _reg) {			\
+	.type = IIO_ACCEL,					\
+	.address = _reg,					\
+	.channel2 = IIO_MOD_##_axis,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.modified = 1,						\
+}
+
+#define DMARD06_TEMP_CHANNEL(_reg) {				\
+	.type = IIO_TEMP,					\
+	.address = _reg,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			      BIT(IIO_CHAN_INFO_OFFSET),	\
+}
+
+struct dmard06_data {
+	struct i2c_client *client;
+	u8 chip_id;
+};
+
+static const struct iio_chan_spec dmard06_channels[] = {
+	DMARD06_ACCEL_CHANNEL(X, DMARD06_XOUT_REG),
+	DMARD06_ACCEL_CHANNEL(Y, DMARD06_YOUT_REG),
+	DMARD06_ACCEL_CHANNEL(Z, DMARD06_ZOUT_REG),
+	DMARD06_TEMP_CHANNEL(DMARD06_TOUT_REG),
+};
+
+static int dmard06_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct dmard06_data *dmard06 = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = i2c_smbus_read_byte_data(dmard06->client,
+					       chan->address);
+		if (ret < 0) {
+			dev_err(&dmard06->client->dev,
+				"Error reading data: %d\n", ret);
+			return ret;
+		}
+
+		*val = sign_extend32(ret, DMARD06_SIGN_BIT);
+
+		if (dmard06->chip_id == DMARD06_CHIP_ID)
+			*val = *val >> 1;
+
+		switch (chan->type) {
+		case IIO_ACCEL:
+			return IIO_VAL_INT;
+		case IIO_TEMP:
+			if (dmard06->chip_id != DMARD06_CHIP_ID)
+				*val = *val / 2;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = DMARD06_TEMP_CENTER_VAL;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ACCEL:
+			*val = 0;
+			if (dmard06->chip_id == DMARD06_CHIP_ID)
+				*val2 = DMARD06_AXIS_SCALE_VAL;
+			else
+				*val2 = DMARD05_AXIS_SCALE_VAL;
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info dmard06_info = {
+	.driver_module	= THIS_MODULE,
+	.read_raw	= dmard06_read_raw,
+};
+
+static int dmard06_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct dmard06_data *dmard06;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C check functionality failed\n");
+		return -ENXIO;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*dmard06));
+	if (!indio_dev) {
+		dev_err(&client->dev, "Failed to allocate iio device\n");
+		return -ENOMEM;
+	}
+
+	dmard06 = iio_priv(indio_dev);
+	dmard06->client = client;
+
+	ret = i2c_smbus_read_byte_data(dmard06->client, DMARD06_CHIP_ID_REG);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading chip id: %d\n", ret);
+		return ret;
+	}
+
+	if (ret != DMARD05_CHIP_ID && ret != DMARD06_CHIP_ID &&
+	    ret != DMARD07_CHIP_ID) {
+		dev_err(&client->dev, "Invalid chip id: %02d\n", ret);
+		return -ENODEV;
+	}
+
+	dmard06->chip_id = ret;
+
+	i2c_set_clientdata(client, indio_dev);
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = DMARD06_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = dmard06_channels;
+	indio_dev->num_channels = ARRAY_SIZE(dmard06_channels);
+	indio_dev->info = &dmard06_info;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int dmard06_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct dmard06_data *dmard06 = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(dmard06->client, DMARD06_CTRL1_REG,
+					DMARD06_MODE_POWERDOWN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int dmard06_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct dmard06_data *dmard06 = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(dmard06->client, DMARD06_CTRL1_REG,
+					DMARD06_MODE_NORMAL);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(dmard06_pm_ops, dmard06_suspend, dmard06_resume);
+#define DMARD06_PM_OPS (&dmard06_pm_ops)
+#else
+#define DMARD06_PM_OPS NULL
+#endif
+
+static const struct i2c_device_id dmard06_id[] = {
+	{ "dmard05", 0 },
+	{ "dmard06", 0 },
+	{ "dmard07", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, dmard06_id);
+
+static const struct of_device_id dmard06_of_match[] = {
+	{ .compatible = "domintech,dmard05" },
+	{ .compatible = "domintech,dmard06" },
+	{ .compatible = "domintech,dmard07" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, dmard06_of_match);
+
+static struct i2c_driver dmard06_driver = {
+	.probe = dmard06_probe,
+	.id_table = dmard06_id,
+	.driver = {
+		.name = DMARD06_DRV_NAME,
+		.of_match_table = of_match_ptr(dmard06_of_match),
+		.pm = DMARD06_PM_OPS,
+	},
+};
+module_i2c_driver(dmard06_driver);
+
+MODULE_AUTHOR("Aleksei Mamlin <mamlinav@gmail.com>");
+MODULE_DESCRIPTION("Domintech DMARD06 accelerometer driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/accel/dmard09.c b/drivers/iio/accel/dmard09.c
new file mode 100644
index 000000000000..d3a28f96565c
--- /dev/null
+++ b/drivers/iio/accel/dmard09.c
@@ -0,0 +1,157 @@
+/*
+ * IIO driver for the 3-axis accelerometer Domintech DMARD09.
+ *
+ * Copyright (c) 2016, Jelle van der Waa <jelle@vdwaa.nl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <asm/unaligned.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#define DMARD09_DRV_NAME	"dmard09"
+
+#define DMARD09_REG_CHIPID      0x18
+#define DMARD09_REG_STAT	0x0A
+#define DMARD09_REG_X		0x0C
+#define DMARD09_REG_Y		0x0E
+#define DMARD09_REG_Z		0x10
+#define DMARD09_CHIPID		0x95
+
+#define DMARD09_BUF_LEN 8
+#define DMARD09_AXIS_X 0
+#define DMARD09_AXIS_Y 1
+#define DMARD09_AXIS_Z 2
+#define DMARD09_AXIS_X_OFFSET ((DMARD09_AXIS_X + 1) * 2)
+#define DMARD09_AXIS_Y_OFFSET ((DMARD09_AXIS_Y + 1 )* 2)
+#define DMARD09_AXIS_Z_OFFSET ((DMARD09_AXIS_Z + 1) * 2)
+
+struct dmard09_data {
+	struct i2c_client *client;
+};
+
+#define DMARD09_CHANNEL(_axis, offset) {			\
+	.type = IIO_ACCEL,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+	.modified = 1,						\
+	.address = offset,					\
+	.channel2 = IIO_MOD_##_axis,				\
+}
+
+static const struct iio_chan_spec dmard09_channels[] = {
+	DMARD09_CHANNEL(X, DMARD09_AXIS_X_OFFSET),
+	DMARD09_CHANNEL(Y, DMARD09_AXIS_Y_OFFSET),
+	DMARD09_CHANNEL(Z, DMARD09_AXIS_Z_OFFSET),
+};
+
+static int dmard09_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct dmard09_data *data = iio_priv(indio_dev);
+	u8 buf[DMARD09_BUF_LEN];
+	int ret;
+	s16 accel;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		/*
+		 * Read from the DMAR09_REG_STAT register, since the chip
+		 * caches reads from the individual X, Y, Z registers.
+		 */
+		ret = i2c_smbus_read_i2c_block_data(data->client,
+						    DMARD09_REG_STAT,
+						    DMARD09_BUF_LEN, buf);
+		if (ret < 0) {
+			dev_err(&data->client->dev, "Error reading reg %d\n",
+				DMARD09_REG_STAT);
+			return ret;
+		}
+
+		accel = get_unaligned_le16(&buf[chan->address]);
+
+		/* Remove lower 3 bits and sign extend */
+		accel <<= 4;
+		accel >>= 7;
+
+		*val = accel;
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info dmard09_info = {
+	.driver_module	= THIS_MODULE,
+	.read_raw	= dmard09_read_raw,
+};
+
+static int dmard09_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct dmard09_data *data;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev) {
+		dev_err(&client->dev, "iio allocation failed\n");
+		return -ENOMEM;
+	}
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+
+	ret = i2c_smbus_read_byte_data(data->client, DMARD09_REG_CHIPID);
+	if (ret < 0) {
+		dev_err(&client->dev, "Error reading chip id %d\n", ret);
+		return ret;
+	}
+
+	if (ret != DMARD09_CHIPID) {
+		dev_err(&client->dev, "Invalid chip id %d\n", ret);
+		return -ENODEV;
+	}
+
+	i2c_set_clientdata(client, indio_dev);
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->name = DMARD09_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = dmard09_channels;
+	indio_dev->num_channels = ARRAY_SIZE(dmard09_channels);
+	indio_dev->info = &dmard09_info;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id dmard09_id[] = {
+	{ "dmard09", 0},
+	{ },
+};
+
+MODULE_DEVICE_TABLE(i2c, dmard09_id);
+
+static struct i2c_driver dmard09_driver = {
+	.driver = {
+		.name = DMARD09_DRV_NAME
+	},
+	.probe = dmard09_probe,
+	.id_table = dmard09_id,
+};
+
+module_i2c_driver(dmard09_driver);
+
+MODULE_AUTHOR("Jelle van der Waa <jelle@vdwaa.nl>");
+MODULE_DESCRIPTION("DMARD09 3-axis accelerometer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c
index 765a72362dc6..3f968c46e667 100644
--- a/drivers/iio/accel/kxcjk-1013.c
+++ b/drivers/iio/accel/kxcjk-1013.c
@@ -1392,6 +1392,7 @@ static const struct acpi_device_id kx_acpi_match[] = {
 	{"KXCJ1013", KXCJK1013},
 	{"KXCJ1008", KXCJ91008},
 	{"KXCJ9000", KXCJ91008},
+	{"KIOX000A", KXCJ91008},
 	{"KXTJ1009", KXTJ21009},
 	{"SMO8500",  KXCJ91008},
 	{ },
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 1de31bdd4ce4..e4022fd89393 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -317,6 +317,19 @@ config MCP3422
 	  This driver can also be built as a module. If so, the module will be
 	  called mcp3422.
 
+config MEDIATEK_MT6577_AUXADC
+        tristate "MediaTek AUXADC driver"
+        depends on ARCH_MEDIATEK || COMPILE_TEST
+        depends on HAS_IOMEM
+        help
+          Say yes here to enable support for MediaTek mt65xx AUXADC.
+
+          The driver supports immediate mode operation to read from one of sixteen
+          channels (external or internal).
+
+          This driver can also be built as a module. If so, the module will be
+          called mt6577_auxadc.
+
 config MEN_Z188_ADC
 	tristate "MEN 16z188 ADC IP Core support"
 	depends on MCB
@@ -426,6 +439,18 @@ config TI_ADC128S052
 	  This driver can also be built as a module. If so, the module will be
 	  called ti-adc128s052.
 
+config TI_ADC161S626
+	tristate "Texas Instruments ADC161S626 1-channel differential ADC"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for Texas Instruments ADC141S626,
+	  and ADC161S626 chips.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called ti-adc161s626.
+
 config TI_ADS1015
 	tristate "Texas Instruments ADS1015 ADC"
 	depends on I2C && !SENSORS_ADS1015
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 0ba0d500eedb..33254eb96bec 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_MAX1027) += max1027.o
 obj-$(CONFIG_MAX1363) += max1363.o
 obj-$(CONFIG_MCP320X) += mcp320x.o
 obj-$(CONFIG_MCP3422) += mcp3422.o
+obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MXS_LRADC) += mxs-lradc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
@@ -41,6 +42,7 @@ obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
+obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
 obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
 obj-$(CONFIG_TI_ADS8688) += ti-ads8688.o
 obj-$(CONFIG_TI_AM335X_ADC) += ti_am335x_adc.o
diff --git a/drivers/iio/adc/ad7298.c b/drivers/iio/adc/ad7298.c
index 10ec8fce395f..e399bf04c73a 100644
--- a/drivers/iio/adc/ad7298.c
+++ b/drivers/iio/adc/ad7298.c
@@ -239,16 +239,16 @@ static int ad7298_read_raw(struct iio_dev *indio_dev,
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
-		mutex_lock(&indio_dev->mlock);
-		if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) {
-			ret = -EBUSY;
-		} else {
-			if (chan->address == AD7298_CH_TEMP)
-				ret = ad7298_scan_temp(st, val);
-			else
-				ret = ad7298_scan_direct(st, chan->address);
-		}
-		mutex_unlock(&indio_dev->mlock);
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		if (chan->address == AD7298_CH_TEMP)
+			ret = ad7298_scan_temp(st, val);
+		else
+			ret = ad7298_scan_direct(st, chan->address);
+
+		iio_device_release_direct_mode(indio_dev);
 
 		if (ret < 0)
 			return ret;
diff --git a/drivers/iio/adc/ad7793.c b/drivers/iio/adc/ad7793.c
index 847789bae821..e6706a09e100 100644
--- a/drivers/iio/adc/ad7793.c
+++ b/drivers/iio/adc/ad7793.c
@@ -519,11 +519,9 @@ static int ad7793_write_raw(struct iio_dev *indio_dev,
 	int ret, i;
 	unsigned int tmp;
 
-	mutex_lock(&indio_dev->mlock);
-	if (iio_buffer_enabled(indio_dev)) {
-		mutex_unlock(&indio_dev->mlock);
-		return -EBUSY;
-	}
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
@@ -548,7 +546,7 @@ static int ad7793_write_raw(struct iio_dev *indio_dev,
 		ret = -EINVAL;
 	}
 
-	mutex_unlock(&indio_dev->mlock);
+	iio_device_release_direct_mode(indio_dev);
 	return ret;
 }
 
diff --git a/drivers/iio/adc/mt6577_auxadc.c b/drivers/iio/adc/mt6577_auxadc.c
new file mode 100644
index 000000000000..2d104c828041
--- /dev/null
+++ b/drivers/iio/adc/mt6577_auxadc.c
@@ -0,0 +1,291 @@
+/*
+ * Copyright (c) 2016 MediaTek Inc.
+ * Author: Zhiyong Tao <zhiyong.tao@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/iopoll.h>
+#include <linux/io.h>
+#include <linux/iio/iio.h>
+
+/* Register definitions */
+#define MT6577_AUXADC_CON0                    0x00
+#define MT6577_AUXADC_CON1                    0x04
+#define MT6577_AUXADC_CON2                    0x10
+#define MT6577_AUXADC_STA                     BIT(0)
+
+#define MT6577_AUXADC_DAT0                    0x14
+#define MT6577_AUXADC_RDY0                    BIT(12)
+
+#define MT6577_AUXADC_MISC                    0x94
+#define MT6577_AUXADC_PDN_EN                  BIT(14)
+
+#define MT6577_AUXADC_DAT_MASK                0xfff
+#define MT6577_AUXADC_SLEEP_US                1000
+#define MT6577_AUXADC_TIMEOUT_US              10000
+#define MT6577_AUXADC_POWER_READY_MS          1
+#define MT6577_AUXADC_SAMPLE_READY_US         25
+
+struct mt6577_auxadc_device {
+	void __iomem *reg_base;
+	struct clk *adc_clk;
+	struct mutex lock;
+};
+
+#define MT6577_AUXADC_CHANNEL(idx) {				    \
+		.type = IIO_VOLTAGE,				    \
+		.indexed = 1,					    \
+		.channel = (idx),				    \
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+}
+
+static const struct iio_chan_spec mt6577_auxadc_iio_channels[] = {
+	MT6577_AUXADC_CHANNEL(0),
+	MT6577_AUXADC_CHANNEL(1),
+	MT6577_AUXADC_CHANNEL(2),
+	MT6577_AUXADC_CHANNEL(3),
+	MT6577_AUXADC_CHANNEL(4),
+	MT6577_AUXADC_CHANNEL(5),
+	MT6577_AUXADC_CHANNEL(6),
+	MT6577_AUXADC_CHANNEL(7),
+	MT6577_AUXADC_CHANNEL(8),
+	MT6577_AUXADC_CHANNEL(9),
+	MT6577_AUXADC_CHANNEL(10),
+	MT6577_AUXADC_CHANNEL(11),
+	MT6577_AUXADC_CHANNEL(12),
+	MT6577_AUXADC_CHANNEL(13),
+	MT6577_AUXADC_CHANNEL(14),
+	MT6577_AUXADC_CHANNEL(15),
+};
+
+static inline void mt6577_auxadc_mod_reg(void __iomem *reg,
+					 u32 or_mask, u32 and_mask)
+{
+	u32 val;
+
+	val = readl(reg);
+	val |= or_mask;
+	val &= ~and_mask;
+	writel(val, reg);
+}
+
+static int mt6577_auxadc_read(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan)
+{
+	u32 val;
+	void __iomem *reg_channel;
+	int ret;
+	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
+
+	reg_channel = adc_dev->reg_base + MT6577_AUXADC_DAT0 +
+		      chan->channel * 0x04;
+
+	mutex_lock(&adc_dev->lock);
+
+	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_CON1,
+			      0, 1 << chan->channel);
+
+	/* read channel and make sure old ready bit == 0 */
+	ret = readl_poll_timeout(reg_channel, val,
+				 ((val & MT6577_AUXADC_RDY0) == 0),
+				 MT6577_AUXADC_SLEEP_US,
+				 MT6577_AUXADC_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"wait for channel[%d] ready bit clear time out\n",
+			chan->channel);
+		goto err_timeout;
+	}
+
+	/* set bit to trigger sample */
+	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_CON1,
+			      1 << chan->channel, 0);
+
+	/* we must delay here for hardware sample channel data */
+	udelay(MT6577_AUXADC_SAMPLE_READY_US);
+
+	/* check MTK_AUXADC_CON2 if auxadc is idle */
+	ret = readl_poll_timeout(adc_dev->reg_base + MT6577_AUXADC_CON2, val,
+				 ((val & MT6577_AUXADC_STA) == 0),
+				 MT6577_AUXADC_SLEEP_US,
+				 MT6577_AUXADC_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"wait for auxadc idle time out\n");
+		goto err_timeout;
+	}
+
+	/* read channel and make sure ready bit == 1 */
+	ret = readl_poll_timeout(reg_channel, val,
+				 ((val & MT6577_AUXADC_RDY0) != 0),
+				 MT6577_AUXADC_SLEEP_US,
+				 MT6577_AUXADC_TIMEOUT_US);
+	if (ret < 0) {
+		dev_err(indio_dev->dev.parent,
+			"wait for channel[%d] data ready time out\n",
+			chan->channel);
+		goto err_timeout;
+	}
+
+	/* read data */
+	val = readl(reg_channel) & MT6577_AUXADC_DAT_MASK;
+
+	mutex_unlock(&adc_dev->lock);
+
+	return val;
+
+err_timeout:
+
+	mutex_unlock(&adc_dev->lock);
+
+	return -ETIMEDOUT;
+}
+
+static int mt6577_auxadc_read_raw(struct iio_dev *indio_dev,
+				  struct iio_chan_spec const *chan,
+				  int *val,
+				  int *val2,
+				  long info)
+{
+	switch (info) {
+	case IIO_CHAN_INFO_PROCESSED:
+		*val = mt6577_auxadc_read(indio_dev, chan);
+		if (*val < 0) {
+			dev_err(indio_dev->dev.parent,
+				"failed to sample data on channel[%d]\n",
+				chan->channel);
+			return *val;
+		}
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info mt6577_auxadc_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = &mt6577_auxadc_read_raw,
+};
+
+static int mt6577_auxadc_probe(struct platform_device *pdev)
+{
+	struct mt6577_auxadc_device *adc_dev;
+	unsigned long adc_clk_rate;
+	struct resource *res;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*adc_dev));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	adc_dev = iio_priv(indio_dev);
+	indio_dev->dev.parent = &pdev->dev;
+	indio_dev->name = dev_name(&pdev->dev);
+	indio_dev->info = &mt6577_auxadc_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mt6577_auxadc_iio_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mt6577_auxadc_iio_channels);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	adc_dev->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(adc_dev->reg_base)) {
+		dev_err(&pdev->dev, "failed to get auxadc base address\n");
+		return PTR_ERR(adc_dev->reg_base);
+	}
+
+	adc_dev->adc_clk = devm_clk_get(&pdev->dev, "main");
+	if (IS_ERR(adc_dev->adc_clk)) {
+		dev_err(&pdev->dev, "failed to get auxadc clock\n");
+		return PTR_ERR(adc_dev->adc_clk);
+	}
+
+	ret = clk_prepare_enable(adc_dev->adc_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable auxadc clock\n");
+		return ret;
+	}
+
+	adc_clk_rate = clk_get_rate(adc_dev->adc_clk);
+	if (!adc_clk_rate) {
+		ret = -EINVAL;
+		dev_err(&pdev->dev, "null clock rate\n");
+		goto err_disable_clk;
+	}
+
+	mutex_init(&adc_dev->lock);
+
+	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
+			      MT6577_AUXADC_PDN_EN, 0);
+	mdelay(MT6577_AUXADC_POWER_READY_MS);
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to register iio device\n");
+		goto err_power_off;
+	}
+
+	return 0;
+
+err_power_off:
+	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
+			      0, MT6577_AUXADC_PDN_EN);
+err_disable_clk:
+	clk_disable_unprepare(adc_dev->adc_clk);
+	return ret;
+}
+
+static int mt6577_auxadc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct mt6577_auxadc_device *adc_dev = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	mt6577_auxadc_mod_reg(adc_dev->reg_base + MT6577_AUXADC_MISC,
+			      0, MT6577_AUXADC_PDN_EN);
+
+	clk_disable_unprepare(adc_dev->adc_clk);
+
+	return 0;
+}
+
+static const struct of_device_id mt6577_auxadc_of_match[] = {
+	{ .compatible = "mediatek,mt2701-auxadc", },
+	{ .compatible = "mediatek,mt8173-auxadc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mt6577_auxadc_of_match);
+
+static struct platform_driver mt6577_auxadc_driver = {
+	.driver = {
+		.name   = "mt6577-auxadc",
+		.of_match_table = mt6577_auxadc_of_match,
+	},
+	.probe	= mt6577_auxadc_probe,
+	.remove	= mt6577_auxadc_remove,
+};
+module_platform_driver(mt6577_auxadc_driver);
+
+MODULE_AUTHOR("Zhiyong Tao <zhiyong.tao@mediatek.com>");
+MODULE_DESCRIPTION("MTK AUXADC Device Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/adc/nau7802.c b/drivers/iio/adc/nau7802.c
index db9b829ccf0d..08f446695f97 100644
--- a/drivers/iio/adc/nau7802.c
+++ b/drivers/iio/adc/nau7802.c
@@ -197,7 +197,7 @@ static irqreturn_t nau7802_eoc_trigger(int irq, void *private)
 	if (st->conversion_count < NAU7802_MIN_CONVERSIONS)
 		st->conversion_count++;
 	if (st->conversion_count >= NAU7802_MIN_CONVERSIONS)
-		complete_all(&st->value_ok);
+		complete(&st->value_ok);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/iio/adc/ti-adc161s626.c b/drivers/iio/adc/ti-adc161s626.c
new file mode 100644
index 000000000000..f94b69f9c288
--- /dev/null
+++ b/drivers/iio/adc/ti-adc161s626.c
@@ -0,0 +1,248 @@
+/*
+ * ti-adc161s626.c - Texas Instruments ADC161S626 1-channel differential ADC
+ *
+ * ADC Devices Supported:
+ *  adc141s626 - 14-bit ADC
+ *  adc161s626 - 16-bit ADC
+ *
+ * Copyright (C) 2016 Matt Ranostay <mranostay@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define TI_ADC_DRV_NAME	"ti-adc161s626"
+
+enum {
+	TI_ADC141S626,
+	TI_ADC161S626,
+};
+
+static const struct iio_chan_spec ti_adc141s626_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct iio_chan_spec ti_adc161s626_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+struct ti_adc_data {
+	struct iio_dev *indio_dev;
+	struct spi_device *spi;
+	u8 read_size;
+	u8 shift;
+
+	u8 buffer[16] ____cacheline_aligned;
+};
+
+static int ti_adc_read_measurement(struct ti_adc_data *data,
+				   struct iio_chan_spec const *chan, int *val)
+{
+	int ret;
+
+	switch (data->read_size) {
+	case 2: {
+		__be16 buf;
+
+		ret = spi_read(data->spi, (void *) &buf, 2);
+		if (ret)
+			return ret;
+
+		*val = be16_to_cpu(buf);
+		break;
+	}
+	case 3: {
+		__be32 buf;
+
+		ret = spi_read(data->spi, (void *) &buf, 3);
+		if (ret)
+			return ret;
+
+		*val = be32_to_cpu(buf) >> 8;
+		break;
+	}
+	default:
+		return -EINVAL;
+	}
+
+	*val = sign_extend32(*val >> data->shift, chan->scan_type.realbits - 1);
+
+	return 0;
+}
+
+static irqreturn_t ti_adc_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ti_adc_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = ti_adc_read_measurement(data, &indio_dev->channels[0],
+				     (int *) &data->buffer);
+	if (!ret)
+		iio_push_to_buffers_with_timestamp(indio_dev,
+					data->buffer,
+					iio_get_time_ns(indio_dev));
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int ti_adc_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct ti_adc_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = ti_adc_read_measurement(data, chan, val);
+	iio_device_release_direct_mode(indio_dev);
+
+	if (!ret)
+		return IIO_VAL_INT;
+
+	return 0;
+}
+
+static const struct iio_info ti_adc_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = ti_adc_read_raw,
+};
+
+static int ti_adc_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct ti_adc_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	indio_dev->info = &ti_adc_info;
+	indio_dev->dev.parent = &spi->dev;
+	indio_dev->dev.of_node = spi->dev.of_node;
+	indio_dev->name = TI_ADC_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	spi_set_drvdata(spi, indio_dev);
+
+	data = iio_priv(indio_dev);
+	data->spi = spi;
+
+	switch (spi_get_device_id(spi)->driver_data) {
+	case TI_ADC141S626:
+		indio_dev->channels = ti_adc141s626_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ti_adc141s626_channels);
+		data->shift = 0;
+		data->read_size = 2;
+		break;
+	case TI_ADC161S626:
+		indio_dev->channels = ti_adc161s626_channels;
+		indio_dev->num_channels = ARRAY_SIZE(ti_adc161s626_channels);
+		data->shift = 6;
+		data->read_size = 3;
+		break;
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 ti_adc_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_unreg_buffer;
+
+	return 0;
+
+error_unreg_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
+}
+
+static int ti_adc_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return 0;
+}
+
+static const struct of_device_id ti_adc_dt_ids[] = {
+	{ .compatible = "ti,adc141s626", },
+	{ .compatible = "ti,adc161s626", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ti_adc_dt_ids);
+
+static const struct spi_device_id ti_adc_id[] = {
+	{"adc141s626", TI_ADC141S626},
+	{"adc161s626", TI_ADC161S626},
+	{},
+};
+MODULE_DEVICE_TABLE(spi, ti_adc_id);
+
+static struct spi_driver ti_adc_driver = {
+	.driver = {
+		.name	= TI_ADC_DRV_NAME,
+		.of_match_table = of_match_ptr(ti_adc_dt_ids),
+	},
+	.probe		= ti_adc_probe,
+	.remove		= ti_adc_remove,
+	.id_table	= ti_adc_id,
+};
+module_spi_driver(ti_adc_driver);
+
+MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
+MODULE_DESCRIPTION("Texas Instruments ADC1x1S 1-channel differential ADC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/buffer/industrialio-buffer-cb.c b/drivers/iio/buffer/industrialio-buffer-cb.c
index 323079c3ccce..b8f550e47d3d 100644
--- a/drivers/iio/buffer/industrialio-buffer-cb.c
+++ b/drivers/iio/buffer/industrialio-buffer-cb.c
@@ -18,6 +18,7 @@ struct iio_cb_buffer {
 	int (*cb)(const void *data, void *private);
 	void *private;
 	struct iio_channel *channels;
+	struct iio_dev *indio_dev;
 };
 
 static struct iio_cb_buffer *buffer_to_cb_buffer(struct iio_buffer *buffer)
@@ -52,7 +53,6 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 {
 	int ret;
 	struct iio_cb_buffer *cb_buff;
-	struct iio_dev *indio_dev;
 	struct iio_channel *chan;
 
 	cb_buff = kzalloc(sizeof(*cb_buff), GFP_KERNEL);
@@ -72,17 +72,17 @@ struct iio_cb_buffer *iio_channel_get_all_cb(struct device *dev,
 		goto error_free_cb_buff;
 	}
 
-	indio_dev = cb_buff->channels[0].indio_dev;
+	cb_buff->indio_dev = cb_buff->channels[0].indio_dev;
 	cb_buff->buffer.scan_mask
-		= kcalloc(BITS_TO_LONGS(indio_dev->masklength), sizeof(long),
-			  GFP_KERNEL);
+		= kcalloc(BITS_TO_LONGS(cb_buff->indio_dev->masklength),
+			  sizeof(long), GFP_KERNEL);
 	if (cb_buff->buffer.scan_mask == NULL) {
 		ret = -ENOMEM;
 		goto error_release_channels;
 	}
 	chan = &cb_buff->channels[0];
 	while (chan->indio_dev) {
-		if (chan->indio_dev != indio_dev) {
+		if (chan->indio_dev != cb_buff->indio_dev) {
 			ret = -EINVAL;
 			goto error_free_scan_mask;
 		}
@@ -105,17 +105,14 @@ EXPORT_SYMBOL_GPL(iio_channel_get_all_cb);
 
 int iio_channel_start_all_cb(struct iio_cb_buffer *cb_buff)
 {
-	return iio_update_buffers(cb_buff->channels[0].indio_dev,
-				  &cb_buff->buffer,
+	return iio_update_buffers(cb_buff->indio_dev, &cb_buff->buffer,
 				  NULL);
 }
 EXPORT_SYMBOL_GPL(iio_channel_start_all_cb);
 
 void iio_channel_stop_all_cb(struct iio_cb_buffer *cb_buff)
 {
-	iio_update_buffers(cb_buff->channels[0].indio_dev,
-			   NULL,
-			   &cb_buff->buffer);
+	iio_update_buffers(cb_buff->indio_dev, NULL, &cb_buff->buffer);
 }
 EXPORT_SYMBOL_GPL(iio_channel_stop_all_cb);
 
@@ -133,6 +130,13 @@ struct iio_channel
 }
 EXPORT_SYMBOL_GPL(iio_channel_cb_get_channels);
 
+struct iio_dev
+*iio_channel_cb_get_iio_dev(const struct iio_cb_buffer *cb_buffer)
+{
+	return cb_buffer->indio_dev;
+}
+EXPORT_SYMBOL_GPL(iio_channel_cb_get_iio_dev);
+
 MODULE_AUTHOR("Jonathan Cameron <jic23@kernel.org>");
 MODULE_DESCRIPTION("Industrial I/O callback buffer");
 MODULE_LICENSE("GPL");
diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
index 4bcc025e8c8a..cea7f9857a1f 100644
--- a/drivers/iio/chemical/Kconfig
+++ b/drivers/iio/chemical/Kconfig
@@ -16,6 +16,7 @@ config ATLAS_PH_SENSOR
 	 Atlas Scientific OEM SM sensors:
 	    * pH SM sensor
 	    * EC SM sensor
+	    * ORP SM sensor
 
 	 To compile this driver as module, choose M here: the
 	 module will be called atlas-ph-sensor.
diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c
index ae038a59d256..84fbff32b96d 100644
--- a/drivers/iio/chemical/atlas-ph-sensor.c
+++ b/drivers/iio/chemical/atlas-ph-sensor.c
@@ -66,12 +66,17 @@
 #define ATLAS_REG_TDS_DATA		0x1c
 #define ATLAS_REG_PSS_DATA		0x20
 
+#define ATLAS_REG_ORP_CALIB_STATUS	0x0d
+#define ATLAS_REG_ORP_DATA		0x0e
+
 #define ATLAS_PH_INT_TIME_IN_US		450000
 #define ATLAS_EC_INT_TIME_IN_US		650000
+#define ATLAS_ORP_INT_TIME_IN_US	450000
 
 enum {
 	ATLAS_PH_SM,
 	ATLAS_EC_SM,
+	ATLAS_ORP_SM,
 };
 
 struct atlas_data {
@@ -84,26 +89,10 @@ struct atlas_data {
 	__be32 buffer[6]; /* 96-bit data + 32-bit pad + 64-bit timestamp */
 };
 
-static const struct regmap_range atlas_volatile_ranges[] = {
-	regmap_reg_range(ATLAS_REG_INT_CONTROL, ATLAS_REG_INT_CONTROL),
-	regmap_reg_range(ATLAS_REG_PH_DATA, ATLAS_REG_PH_DATA + 4),
-	regmap_reg_range(ATLAS_REG_EC_DATA, ATLAS_REG_PSS_DATA + 4),
-};
-
-static const struct regmap_access_table atlas_volatile_table = {
-	.yes_ranges	= atlas_volatile_ranges,
-	.n_yes_ranges	= ARRAY_SIZE(atlas_volatile_ranges),
-};
-
 static const struct regmap_config atlas_regmap_config = {
 	.name = ATLAS_REGMAP_NAME,
-
 	.reg_bits = 8,
 	.val_bits = 8,
-
-	.volatile_table = &atlas_volatile_table,
-	.max_register = ATLAS_REG_PSS_DATA + 4,
-	.cache_type = REGCACHE_RBTREE,
 };
 
 static const struct iio_chan_spec atlas_ph_channels[] = {
@@ -175,6 +164,23 @@ static const struct iio_chan_spec atlas_ec_channels[] = {
 	},
 };
 
+static const struct iio_chan_spec atlas_orp_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.address = ATLAS_REG_ORP_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
 static int atlas_check_ph_calibration(struct atlas_data *data)
 {
 	struct device *dev = &data->client->dev;
@@ -240,6 +246,22 @@ static int atlas_check_ec_calibration(struct atlas_data *data)
 	return 0;
 }
 
+static int atlas_check_orp_calibration(struct atlas_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, ATLAS_REG_ORP_CALIB_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!val)
+		dev_warn(dev, "device has not been calibrated\n");
+
+	return 0;
+};
+
 struct atlas_device {
 	const struct iio_chan_spec *channels;
 	int num_channels;
@@ -264,7 +286,13 @@ static struct atlas_device atlas_devices[] = {
 				.calibration = &atlas_check_ec_calibration,
 				.delay = ATLAS_EC_INT_TIME_IN_US,
 	},
-
+	[ATLAS_ORP_SM] = {
+				.channels = atlas_orp_channels,
+				.num_channels = 2,
+				.data_reg = ATLAS_REG_ORP_DATA,
+				.calibration = &atlas_check_orp_calibration,
+				.delay = ATLAS_ORP_INT_TIME_IN_US,
+	},
 };
 
 static int atlas_set_powermode(struct atlas_data *data, int on)
@@ -402,15 +430,14 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 		case IIO_PH:
 		case IIO_CONCENTRATION:
 		case IIO_ELECTRICALCONDUCTIVITY:
-			mutex_lock(&indio_dev->mlock);
+		case IIO_VOLTAGE:
+			ret = iio_device_claim_direct_mode(indio_dev);
+			if (ret)
+				return ret;
 
-			if (iio_buffer_enabled(indio_dev))
-				ret = -EBUSY;
-			else
-				ret = atlas_read_measurement(data,
-							chan->address, &reg);
+			ret = atlas_read_measurement(data, chan->address, &reg);
 
-			mutex_unlock(&indio_dev->mlock);
+			iio_device_release_direct_mode(indio_dev);
 			break;
 		default:
 			ret = -EINVAL;
@@ -440,6 +467,10 @@ static int atlas_read_raw(struct iio_dev *indio_dev,
 			*val = 0; /* 0.000000001 */
 			*val2 = 1000;
 			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_VOLTAGE:
+			*val = 1; /* 0.1 */
+			*val2 = 10;
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -475,6 +506,7 @@ static const struct iio_info atlas_info = {
 static const struct i2c_device_id atlas_id[] = {
 	{ "atlas-ph-sm", ATLAS_PH_SM},
 	{ "atlas-ec-sm", ATLAS_EC_SM},
+	{ "atlas-orp-sm", ATLAS_ORP_SM},
 	{}
 };
 MODULE_DEVICE_TABLE(i2c, atlas_id);
@@ -482,6 +514,7 @@ MODULE_DEVICE_TABLE(i2c, atlas_id);
 static const struct of_device_id atlas_dt_ids[] = {
 	{ .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, },
 	{ .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, },
+	{ .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, atlas_dt_ids);
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
index 5b41f9d0d4f3..5264ed6e03e5 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c
@@ -122,6 +122,14 @@ int hid_sensor_power_state(struct hid_sensor_common *st, bool state)
 #endif
 }
 
+static void hid_sensor_set_power_work(struct work_struct *work)
+{
+	struct hid_sensor_common *attrb = container_of(work,
+						       struct hid_sensor_common,
+						       work);
+	_hid_sensor_power_state(attrb, true);
+}
+
 static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
 						bool state)
 {
@@ -130,6 +138,7 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig,
 
 void hid_sensor_remove_trigger(struct hid_sensor_common *attrb)
 {
+	cancel_work_sync(&attrb->work);
 	iio_trigger_unregister(attrb->trigger);
 	iio_trigger_free(attrb->trigger);
 }
@@ -170,6 +179,9 @@ int hid_sensor_setup_trigger(struct iio_dev *indio_dev, const char *name,
 		goto error_unreg_trigger;
 
 	iio_device_set_drvdata(indio_dev, attrb);
+
+	INIT_WORK(&attrb->work, hid_sensor_set_power_work);
+
 	pm_suspend_ignore_children(&attrb->pdev->dev, true);
 	pm_runtime_enable(&attrb->pdev->dev);
 	/* Default to 3 seconds, but can be changed from sysfs */
@@ -202,7 +214,15 @@ static int hid_sensor_resume(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
 	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
+	schedule_work(&attrb->work);
+	return 0;
+}
 
+static int hid_sensor_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct hid_sensor_common *attrb = iio_device_get_drvdata(indio_dev);
 	return _hid_sensor_power_state(attrb, true);
 }
 
@@ -211,7 +231,7 @@ static int hid_sensor_resume(struct device *dev)
 const struct dev_pm_ops hid_sensor_pm_ops = {
 	SET_SYSTEM_SLEEP_PM_OPS(hid_sensor_suspend, hid_sensor_resume)
 	SET_RUNTIME_PM_OPS(hid_sensor_suspend,
-			   hid_sensor_resume, NULL)
+			   hid_sensor_runtime_resume, NULL)
 };
 EXPORT_SYMBOL(hid_sensor_pm_ops);
 
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index ca814479fadf..b9f044249194 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -181,6 +181,15 @@ config AD7303
 	  To compile this driver as module choose M here: the module will be called
 	  ad7303.
 
+config CIO_DAC
+	tristate "Measurement Computing CIO-DAC IIO driver"
+	depends on X86 && ISA_BUS_API
+	help
+	  Say yes here to build support for the Measurement Computing CIO-DAC
+	  analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
+	  base port addresses for the devices may be configured via the base
+	  array module parameter.
+
 config LPC18XX_DAC
 	tristate "NXP LPC18xx DAC driver"
 	depends on ARCH_LPC18XX || COMPILE_TEST
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 8b78d5ca9b11..b1a120612462 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_AD5764) += ad5764.o
 obj-$(CONFIG_AD5791) += ad5791.o
 obj-$(CONFIG_AD5686) += ad5686.o
 obj-$(CONFIG_AD7303) += ad7303.o
+obj-$(CONFIG_CIO_DAC) += cio-dac.o
 obj-$(CONFIG_LPC18XX_DAC) += lpc18xx_dac.o
 obj-$(CONFIG_M62332) += m62332.o
 obj-$(CONFIG_MAX517) += max517.o
diff --git a/drivers/iio/dac/cio-dac.c b/drivers/iio/dac/cio-dac.c
new file mode 100644
index 000000000000..5a743e2a779d
--- /dev/null
+++ b/drivers/iio/dac/cio-dac.c
@@ -0,0 +1,144 @@
+/*
+ * IIO driver for the Measurement Computing CIO-DAC
+ * Copyright (C) 2016 William Breathitt Gray
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * This driver supports the following Measurement Computing devices: CIO-DAC16,
+ * CIO-DAC06, and PC104-DAC06.
+ */
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/isa.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+
+#define CIO_DAC_NUM_CHAN 16
+
+#define CIO_DAC_CHAN(chan) {				\
+	.type = IIO_VOLTAGE,				\
+	.channel = chan,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+	.indexed = 1,					\
+	.output = 1					\
+}
+
+#define CIO_DAC_EXTENT 32
+
+static unsigned int base[max_num_isa_dev(CIO_DAC_EXTENT)];
+static unsigned int num_cio_dac;
+module_param_array(base, uint, &num_cio_dac, 0);
+MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses");
+
+/**
+ * struct cio_dac_iio - IIO device private data structure
+ * @chan_out_states:	channels' output states
+ * @base:		base port address of the IIO device
+ */
+struct cio_dac_iio {
+	int chan_out_states[CIO_DAC_NUM_CHAN];
+	unsigned int base;
+};
+
+static int cio_dac_read_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int *val, int *val2, long mask)
+{
+	struct cio_dac_iio *const priv = iio_priv(indio_dev);
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	*val = priv->chan_out_states[chan->channel];
+
+	return IIO_VAL_INT;
+}
+
+static int cio_dac_write_raw(struct iio_dev *indio_dev,
+	struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	struct cio_dac_iio *const priv = iio_priv(indio_dev);
+	const unsigned int chan_addr_offset = 2 * chan->channel;
+
+	if (mask != IIO_CHAN_INFO_RAW)
+		return -EINVAL;
+
+	/* DAC can only accept up to a 16-bit value */
+	if ((unsigned int)val > 65535)
+		return -EINVAL;
+
+	priv->chan_out_states[chan->channel] = val;
+	outw(val, priv->base + chan_addr_offset);
+
+	return 0;
+}
+
+static const struct iio_info cio_dac_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = cio_dac_read_raw,
+	.write_raw = cio_dac_write_raw
+};
+
+static const struct iio_chan_spec cio_dac_channels[CIO_DAC_NUM_CHAN] = {
+	CIO_DAC_CHAN(0), CIO_DAC_CHAN(1), CIO_DAC_CHAN(2), CIO_DAC_CHAN(3),
+	CIO_DAC_CHAN(4), CIO_DAC_CHAN(5), CIO_DAC_CHAN(6), CIO_DAC_CHAN(7),
+	CIO_DAC_CHAN(8), CIO_DAC_CHAN(9), CIO_DAC_CHAN(10), CIO_DAC_CHAN(11),
+	CIO_DAC_CHAN(12), CIO_DAC_CHAN(13), CIO_DAC_CHAN(14), CIO_DAC_CHAN(15)
+};
+
+static int cio_dac_probe(struct device *dev, unsigned int id)
+{
+	struct iio_dev *indio_dev;
+	struct cio_dac_iio *priv;
+	unsigned int i;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	if (!devm_request_region(dev, base[id], CIO_DAC_EXTENT,
+		dev_name(dev))) {
+		dev_err(dev, "Unable to request port addresses (0x%X-0x%X)\n",
+			base[id], base[id] + CIO_DAC_EXTENT);
+		return -EBUSY;
+	}
+
+	indio_dev->info = &cio_dac_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = cio_dac_channels;
+	indio_dev->num_channels = CIO_DAC_NUM_CHAN;
+	indio_dev->name = dev_name(dev);
+
+	priv = iio_priv(indio_dev);
+	priv->base = base[id];
+
+	/* initialize DAC outputs to 0V */
+	for (i = 0; i < 32; i += 2)
+		outw(0, base[id] + i);
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static struct isa_driver cio_dac_driver = {
+	.probe = cio_dac_probe,
+	.driver = {
+		.name = "cio-dac"
+	}
+};
+
+module_isa_driver(cio_dac_driver, num_cio_dac);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
+MODULE_DESCRIPTION("Measurement Computing CIO-DAC IIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig
index 738a86d9e4a9..f155386286bf 100644
--- a/drivers/iio/humidity/Kconfig
+++ b/drivers/iio/humidity/Kconfig
@@ -26,11 +26,11 @@ config HDC100X
 	tristate "TI HDC100x relative humidity and temperature sensor"
 	depends on I2C
 	help
-	 Say yes here to build support for the TI HDC100x series of
-	 relative humidity and temperature sensors.
+	  Say yes here to build support for the Texas Instruments
+	  HDC1000 and HDC1008 relative humidity and temperature sensors.
 
-	 To compile this driver as a module, choose M here: the module
-	 will be called hdc100x.
+	  To compile this driver as a module, choose M here: the module
+	  will be called hdc100x.
 
 config HTU21
 	tristate "Measurement Specialties HTU21 humidity & temperature sensor"
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 7c566f516572..28217478d828 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -333,11 +333,11 @@ config US5182D
 	 will be called us5182d.
 
 config VCNL4000
-	tristate "VCNL4000 combined ALS and proximity sensor"
+	tristate "VCNL4000/4010/4020 combined ALS and proximity sensor"
 	depends on I2C
 	help
-	 Say Y here if you want to build a driver for the Vishay VCNL4000
-	 combined ambient light and proximity sensor.
+	 Say Y here if you want to build a driver for the Vishay VCNL4000,
+	 VCNL4010, VCNL4020 combined ambient light and proximity sensor.
 
 	 To compile this driver as a module, choose M here: the
 	 module will be called vcnl4000.
diff --git a/drivers/iio/light/us5182d.c b/drivers/iio/light/us5182d.c
index 20c40f780964..18cf2e29e4d5 100644
--- a/drivers/iio/light/us5182d.c
+++ b/drivers/iio/light/us5182d.c
@@ -894,7 +894,7 @@ static int us5182d_probe(struct i2c_client *client,
 		goto out_err;
 
 	if (data->default_continuous) {
-		pm_runtime_set_active(&client->dev);
+		ret = pm_runtime_set_active(&client->dev);
 		if (ret < 0)
 			goto out_err;
 	}
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index c9d85bbc9230..360b6e98137a 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -1,6 +1,6 @@
 /*
- * vcnl4000.c - Support for Vishay VCNL4000 combined ambient light and
- * proximity sensor
+ * vcnl4000.c - Support for Vishay VCNL4000/4010/4020 combined ambient
+ * light and proximity sensor
  *
  * Copyright 2012 Peter Meerwald <pmeerw@pmeerw.net>
  *
@@ -13,6 +13,8 @@
  * TODO:
  *   allow to adjust IR current
  *   proximity threshold and event handling
+ *   periodic ALS/proximity measurement (VCNL4010/20)
+ *   interrupts (VCNL4010/20)
  */
 
 #include <linux/module.h>
@@ -24,6 +26,8 @@
 #include <linux/iio/sysfs.h>
 
 #define VCNL4000_DRV_NAME "vcnl4000"
+#define VCNL4000_ID		0x01
+#define VCNL4010_ID		0x02 /* for VCNL4020, VCNL4010 */
 
 #define VCNL4000_COMMAND	0x80 /* Command register */
 #define VCNL4000_PROD_REV	0x81 /* Product ID and Revision ID */
@@ -37,13 +41,14 @@
 #define VCNL4000_PS_MOD_ADJ	0x8a /* Proximity modulator timing adjustment */
 
 /* Bit masks for COMMAND register */
-#define VCNL4000_AL_RDY		0x40 /* ALS data ready? */
-#define VCNL4000_PS_RDY		0x20 /* proximity data ready? */
-#define VCNL4000_AL_OD		0x10 /* start on-demand ALS measurement */
-#define VCNL4000_PS_OD		0x08 /* start on-demand proximity measurement */
+#define VCNL4000_AL_RDY		BIT(6) /* ALS data ready? */
+#define VCNL4000_PS_RDY		BIT(5) /* proximity data ready? */
+#define VCNL4000_AL_OD		BIT(4) /* start on-demand ALS measurement */
+#define VCNL4000_PS_OD		BIT(3) /* start on-demand proximity measurement */
 
 struct vcnl4000_data {
 	struct i2c_client *client;
+	struct mutex lock;
 };
 
 static const struct i2c_device_id vcnl4000_id[] = {
@@ -59,16 +64,18 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 	__be16 buf;
 	int ret;
 
+	mutex_lock(&data->lock);
+
 	ret = i2c_smbus_write_byte_data(data->client, VCNL4000_COMMAND,
 					req_mask);
 	if (ret < 0)
-		return ret;
+		goto fail;
 
 	/* wait for data to become ready */
 	while (tries--) {
 		ret = i2c_smbus_read_byte_data(data->client, VCNL4000_COMMAND);
 		if (ret < 0)
-			return ret;
+			goto fail;
 		if (ret & rdy_mask)
 			break;
 		msleep(20); /* measurement takes up to 100 ms */
@@ -77,17 +84,23 @@ static int vcnl4000_measure(struct vcnl4000_data *data, u8 req_mask,
 	if (tries < 0) {
 		dev_err(&data->client->dev,
 			"vcnl4000_measure() failed, data not ready\n");
-		return -EIO;
+		ret = -EIO;
+		goto fail;
 	}
 
 	ret = i2c_smbus_read_i2c_block_data(data->client,
 		data_reg, sizeof(buf), (u8 *) &buf);
 	if (ret < 0)
-		return ret;
+		goto fail;
 
+	mutex_unlock(&data->lock);
 	*val = be16_to_cpu(buf);
 
 	return 0;
+
+fail:
+	mutex_unlock(&data->lock);
+	return ret;
 }
 
 static const struct iio_chan_spec vcnl4000_channels[] = {
@@ -105,7 +118,7 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
 				struct iio_chan_spec const *chan,
 				int *val, int *val2, long mask)
 {
-	int ret = -EINVAL;
+	int ret;
 	struct vcnl4000_data *data = iio_priv(indio_dev);
 
 	switch (mask) {
@@ -117,32 +130,27 @@ static int vcnl4000_read_raw(struct iio_dev *indio_dev,
 				VCNL4000_AL_RESULT_HI, val);
 			if (ret < 0)
 				return ret;
-			ret = IIO_VAL_INT;
-			break;
+			return IIO_VAL_INT;
 		case IIO_PROXIMITY:
 			ret = vcnl4000_measure(data,
 				VCNL4000_PS_OD, VCNL4000_PS_RDY,
 				VCNL4000_PS_RESULT_HI, val);
 			if (ret < 0)
 				return ret;
-			ret = IIO_VAL_INT;
-			break;
+			return IIO_VAL_INT;
 		default:
-			break;
+			return -EINVAL;
 		}
-		break;
 	case IIO_CHAN_INFO_SCALE:
-		if (chan->type == IIO_LIGHT) {
-			*val = 0;
-			*val2 = 250000;
-			ret = IIO_VAL_INT_PLUS_MICRO;
-		}
-		break;
+		if (chan->type != IIO_LIGHT)
+			return -EINVAL;
+
+		*val = 0;
+		*val2 = 250000;
+		return IIO_VAL_INT_PLUS_MICRO;
 	default:
-		break;
+		return -EINVAL;
 	}
-
-	return ret;
 }
 
 static const struct iio_info vcnl4000_info = {
@@ -155,7 +163,7 @@ static int vcnl4000_probe(struct i2c_client *client,
 {
 	struct vcnl4000_data *data;
 	struct iio_dev *indio_dev;
-	int ret;
+	int ret, prod_id;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
@@ -164,13 +172,19 @@ static int vcnl4000_probe(struct i2c_client *client,
 	data = iio_priv(indio_dev);
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
+	mutex_init(&data->lock);
 
 	ret = i2c_smbus_read_byte_data(data->client, VCNL4000_PROD_REV);
 	if (ret < 0)
 		return ret;
 
-	dev_info(&client->dev, "VCNL4000 Ambient light/proximity sensor, Prod %02x, Rev: %02x\n",
-		ret >> 4, ret & 0xf);
+	prod_id = ret >> 4;
+	if (prod_id != VCNL4010_ID && prod_id != VCNL4000_ID)
+		return -ENODEV;
+
+	dev_dbg(&client->dev, "%s Ambient light/proximity sensor, Rev: %02x\n",
+		(prod_id == VCNL4010_ID) ? "VCNL4010/4020" : "VCNL4000",
+		ret & 0xf);
 
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->info = &vcnl4000_info;
diff --git a/drivers/iio/magnetometer/Kconfig b/drivers/iio/magnetometer/Kconfig
index 1f842abcb4a4..421ad90a5fbe 100644
--- a/drivers/iio/magnetometer/Kconfig
+++ b/drivers/iio/magnetometer/Kconfig
@@ -5,8 +5,22 @@
 
 menu "Magnetometer sensors"
 
+config AK8974
+	tristate "Asahi Kasei AK8974 3-Axis Magnetometer"
+	depends on I2C
+	depends on OF
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Asahi Kasei AK8974 or
+	  AMI305 I2C-based 3-axis magnetometer chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called ak8974.
+
 config AK8975
-	tristate "Asahi Kasei AK 3-Axis Magnetometer"
+	tristate "Asahi Kasei AK8975 3-Axis Magnetometer"
 	depends on I2C
 	depends on GPIOLIB || COMPILE_TEST
 	select IIO_BUFFER
diff --git a/drivers/iio/magnetometer/Makefile b/drivers/iio/magnetometer/Makefile
index 92a745c9a6e8..b86d6cb7f285 100644
--- a/drivers/iio/magnetometer/Makefile
+++ b/drivers/iio/magnetometer/Makefile
@@ -3,6 +3,7 @@
 #
 
 # When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AK8974)	+= ak8974.o
 obj-$(CONFIG_AK8975)	+= ak8975.o
 obj-$(CONFIG_BMC150_MAGN) += bmc150_magn.o
 obj-$(CONFIG_BMC150_MAGN_I2C) += bmc150_magn_i2c.o
diff --git a/drivers/iio/magnetometer/ak8974.c b/drivers/iio/magnetometer/ak8974.c
new file mode 100644
index 000000000000..e70e4e22b72c
--- /dev/null
+++ b/drivers/iio/magnetometer/ak8974.c
@@ -0,0 +1,863 @@
+/*
+ * Driver for the Asahi Kasei EMD Corporation AK8974
+ * and Aichi Steel AMI305 magnetometer chips.
+ * Based on a patch from Samu Onkalo and the AK8975 IIO driver.
+ *
+ * Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+ * Copyright (c) 2010 NVIDIA Corporation.
+ * Copyright (C) 2016 Linaro Ltd.
+ *
+ * Author: Samu Onkalo <samu.p.onkalo@nokia.com>
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h> /* For irq_get_irq_data() */
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+/*
+ * 16-bit registers are little-endian. LSB is at the address defined below
+ * and MSB is at the next higher address.
+ */
+
+/* These registers are common for AK8974 and AMI305 */
+#define AK8974_SELFTEST		0x0C
+#define AK8974_SELFTEST_IDLE	0x55
+#define AK8974_SELFTEST_OK	0xAA
+
+#define AK8974_INFO		0x0D
+
+#define AK8974_WHOAMI		0x0F
+#define AK8974_WHOAMI_VALUE_AMI305 0x47
+#define AK8974_WHOAMI_VALUE_AK8974 0x48
+
+#define AK8974_DATA_X		0x10
+#define AK8974_DATA_Y		0x12
+#define AK8974_DATA_Z		0x14
+#define AK8974_INT_SRC		0x16
+#define AK8974_STATUS		0x18
+#define AK8974_INT_CLEAR	0x1A
+#define AK8974_CTRL1		0x1B
+#define AK8974_CTRL2		0x1C
+#define AK8974_CTRL3		0x1D
+#define AK8974_INT_CTRL		0x1E
+#define AK8974_INT_THRES	0x26  /* Absolute any axis value threshold */
+#define AK8974_PRESET		0x30
+
+/* AK8974-specific offsets */
+#define AK8974_OFFSET_X		0x20
+#define AK8974_OFFSET_Y		0x22
+#define AK8974_OFFSET_Z		0x24
+/* AMI305-specific offsets */
+#define AMI305_OFFSET_X		0x6C
+#define AMI305_OFFSET_Y		0x72
+#define AMI305_OFFSET_Z		0x78
+
+/* Different temperature registers */
+#define AK8974_TEMP		0x31
+#define AMI305_TEMP		0x60
+
+#define AK8974_INT_X_HIGH	BIT(7) /* Axis over +threshold  */
+#define AK8974_INT_Y_HIGH	BIT(6)
+#define AK8974_INT_Z_HIGH	BIT(5)
+#define AK8974_INT_X_LOW	BIT(4) /* Axis below -threshold	*/
+#define AK8974_INT_Y_LOW	BIT(3)
+#define AK8974_INT_Z_LOW	BIT(2)
+#define AK8974_INT_RANGE	BIT(1) /* Range overflow (any axis) */
+
+#define AK8974_STATUS_DRDY	BIT(6) /* Data ready */
+#define AK8974_STATUS_OVERRUN	BIT(5) /* Data overrun */
+#define AK8974_STATUS_INT	BIT(4) /* Interrupt occurred */
+
+#define AK8974_CTRL1_POWER	BIT(7) /* 0 = standby; 1 = active */
+#define AK8974_CTRL1_RATE	BIT(4) /* 0 = 10 Hz; 1 = 20 Hz	 */
+#define AK8974_CTRL1_FORCE_EN	BIT(1) /* 0 = normal; 1 = force	 */
+#define AK8974_CTRL1_MODE2	BIT(0) /* 0 */
+
+#define AK8974_CTRL2_INT_EN	BIT(4)  /* 1 = enable interrupts	      */
+#define AK8974_CTRL2_DRDY_EN	BIT(3)  /* 1 = enable data ready signal */
+#define AK8974_CTRL2_DRDY_POL	BIT(2)  /* 1 = data ready active high   */
+#define AK8974_CTRL2_RESDEF	(AK8974_CTRL2_DRDY_POL)
+
+#define AK8974_CTRL3_RESET	BIT(7) /* Software reset		  */
+#define AK8974_CTRL3_FORCE	BIT(6) /* Start forced measurement */
+#define AK8974_CTRL3_SELFTEST	BIT(4) /* Set selftest register	  */
+#define AK8974_CTRL3_RESDEF	0x00
+
+#define AK8974_INT_CTRL_XEN	BIT(7) /* Enable interrupt for this axis */
+#define AK8974_INT_CTRL_YEN	BIT(6)
+#define AK8974_INT_CTRL_ZEN	BIT(5)
+#define AK8974_INT_CTRL_XYZEN	(BIT(7)|BIT(6)|BIT(5))
+#define AK8974_INT_CTRL_POL	BIT(3) /* 0 = active low; 1 = active high */
+#define AK8974_INT_CTRL_PULSE	BIT(1) /* 0 = latched; 1 = pulse (50 usec) */
+#define AK8974_INT_CTRL_RESDEF	(AK8974_INT_CTRL_XYZEN | AK8974_INT_CTRL_POL)
+
+/* The AMI305 has elaborate FW version and serial number registers */
+#define AMI305_VER		0xE8
+#define AMI305_SN		0xEA
+
+#define AK8974_MAX_RANGE	2048
+
+#define AK8974_POWERON_DELAY	50
+#define AK8974_ACTIVATE_DELAY	1
+#define AK8974_SELFTEST_DELAY	1
+/*
+ * Set the autosuspend to two orders of magnitude larger than the poweron
+ * delay to make sane reasonable power tradeoff savings (5 seconds in
+ * this case).
+ */
+#define AK8974_AUTOSUSPEND_DELAY 5000
+
+#define AK8974_MEASTIME		3
+
+#define AK8974_PWR_ON		1
+#define AK8974_PWR_OFF		0
+
+/**
+ * struct ak8974 - state container for the AK8974 driver
+ * @i2c: parent I2C client
+ * @orientation: mounting matrix, flipped axis etc
+ * @map: regmap to access the AK8974 registers over I2C
+ * @regs: the avdd and dvdd power regulators
+ * @name: the name of the part
+ * @variant: the whoami ID value (for selecting code paths)
+ * @lock: locks the magnetometer for exclusive use during a measurement
+ * @drdy_irq: uses the DRDY IRQ line
+ * @drdy_complete: completion for DRDY
+ * @drdy_active_low: the DRDY IRQ is active low
+ */
+struct ak8974 {
+	struct i2c_client *i2c;
+	struct iio_mount_matrix orientation;
+	struct regmap *map;
+	struct regulator_bulk_data regs[2];
+	const char *name;
+	u8 variant;
+	struct mutex lock;
+	bool drdy_irq;
+	struct completion drdy_complete;
+	bool drdy_active_low;
+};
+
+static const char ak8974_reg_avdd[] = "avdd";
+static const char ak8974_reg_dvdd[] = "dvdd";
+
+static int ak8974_set_power(struct ak8974 *ak8974, bool mode)
+{
+	int ret;
+	u8 val;
+
+	val = mode ? AK8974_CTRL1_POWER : 0;
+	val |= AK8974_CTRL1_FORCE_EN;
+	ret = regmap_write(ak8974->map, AK8974_CTRL1, val);
+	if (ret < 0)
+		return ret;
+
+	if (mode)
+		msleep(AK8974_ACTIVATE_DELAY);
+
+	return 0;
+}
+
+static int ak8974_reset(struct ak8974 *ak8974)
+{
+	int ret;
+
+	/* Power on to get register access. Sets CTRL1 reg to reset state */
+	ret = ak8974_set_power(ak8974, AK8974_PWR_ON);
+	if (ret)
+		return ret;
+	ret = regmap_write(ak8974->map, AK8974_CTRL2, AK8974_CTRL2_RESDEF);
+	if (ret)
+		return ret;
+	ret = regmap_write(ak8974->map, AK8974_CTRL3, AK8974_CTRL3_RESDEF);
+	if (ret)
+		return ret;
+	ret = regmap_write(ak8974->map, AK8974_INT_CTRL,
+			   AK8974_INT_CTRL_RESDEF);
+	if (ret)
+		return ret;
+
+	/* After reset, power off is default state */
+	return ak8974_set_power(ak8974, AK8974_PWR_OFF);
+}
+
+static int ak8974_configure(struct ak8974 *ak8974)
+{
+	int ret;
+
+	ret = regmap_write(ak8974->map, AK8974_CTRL2, AK8974_CTRL2_DRDY_EN |
+			   AK8974_CTRL2_INT_EN);
+	if (ret)
+		return ret;
+	ret = regmap_write(ak8974->map, AK8974_CTRL3, 0);
+	if (ret)
+		return ret;
+	ret = regmap_write(ak8974->map, AK8974_INT_CTRL, AK8974_INT_CTRL_POL);
+	if (ret)
+		return ret;
+
+	return regmap_write(ak8974->map, AK8974_PRESET, 0);
+}
+
+static int ak8974_trigmeas(struct ak8974 *ak8974)
+{
+	unsigned int clear;
+	u8 mask;
+	u8 val;
+	int ret;
+
+	/* Clear any previous measurement overflow status */
+	ret = regmap_read(ak8974->map, AK8974_INT_CLEAR, &clear);
+	if (ret)
+		return ret;
+
+	/* If we have a DRDY IRQ line, use it */
+	if (ak8974->drdy_irq) {
+		mask = AK8974_CTRL2_INT_EN |
+			AK8974_CTRL2_DRDY_EN |
+			AK8974_CTRL2_DRDY_POL;
+		val = AK8974_CTRL2_DRDY_EN;
+
+		if (!ak8974->drdy_active_low)
+			val |= AK8974_CTRL2_DRDY_POL;
+
+		init_completion(&ak8974->drdy_complete);
+		ret = regmap_update_bits(ak8974->map, AK8974_CTRL2,
+					 mask, val);
+		if (ret)
+			return ret;
+	}
+
+	/* Force a measurement */
+	return regmap_update_bits(ak8974->map,
+				  AK8974_CTRL3,
+				  AK8974_CTRL3_FORCE,
+				  AK8974_CTRL3_FORCE);
+}
+
+static int ak8974_await_drdy(struct ak8974 *ak8974)
+{
+	int timeout = 2;
+	unsigned int val;
+	int ret;
+
+	if (ak8974->drdy_irq) {
+		ret = wait_for_completion_timeout(&ak8974->drdy_complete,
+					1 + msecs_to_jiffies(1000));
+		if (!ret) {
+			dev_err(&ak8974->i2c->dev,
+				"timeout waiting for DRDY IRQ\n");
+			return -ETIMEDOUT;
+		}
+		return 0;
+	}
+
+	/* Default delay-based poll loop */
+	do {
+		msleep(AK8974_MEASTIME);
+		ret = regmap_read(ak8974->map, AK8974_STATUS, &val);
+		if (ret < 0)
+			return ret;
+		if (val & AK8974_STATUS_DRDY)
+			return 0;
+	} while (--timeout);
+	if (!timeout) {
+		dev_err(&ak8974->i2c->dev,
+			"timeout waiting for DRDY\n");
+		return -ETIMEDOUT;
+	}
+
+	return 0;
+}
+
+static int ak8974_getresult(struct ak8974 *ak8974, s16 *result)
+{
+	unsigned int src;
+	int ret;
+
+	ret = ak8974_await_drdy(ak8974);
+	if (ret)
+		return ret;
+	ret = regmap_read(ak8974->map, AK8974_INT_SRC, &src);
+	if (ret < 0)
+		return ret;
+
+	/* Out of range overflow! Strong magnet close? */
+	if (src & AK8974_INT_RANGE) {
+		dev_err(&ak8974->i2c->dev,
+			"range overflow in sensor\n");
+		return -ERANGE;
+	}
+
+	ret = regmap_bulk_read(ak8974->map, AK8974_DATA_X, result, 6);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+static irqreturn_t ak8974_drdy_irq(int irq, void *d)
+{
+	struct ak8974 *ak8974 = d;
+
+	if (!ak8974->drdy_irq)
+		return IRQ_NONE;
+
+	/* TODO: timestamp here to get good measurement stamps */
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t ak8974_drdy_irq_thread(int irq, void *d)
+{
+	struct ak8974 *ak8974 = d;
+	unsigned int val;
+	int ret;
+
+	/* Check if this was a DRDY from us */
+	ret = regmap_read(ak8974->map, AK8974_STATUS, &val);
+	if (ret < 0) {
+		dev_err(&ak8974->i2c->dev, "error reading DRDY status\n");
+		return IRQ_HANDLED;
+	}
+	if (val & AK8974_STATUS_DRDY) {
+		/* Yes this was our IRQ */
+		complete(&ak8974->drdy_complete);
+		return IRQ_HANDLED;
+	}
+
+	/* We may be on a shared IRQ, let the next client check */
+	return IRQ_NONE;
+}
+
+static int ak8974_selftest(struct ak8974 *ak8974)
+{
+	struct device *dev = &ak8974->i2c->dev;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_read(ak8974->map, AK8974_SELFTEST, &val);
+	if (ret)
+		return ret;
+	if (val != AK8974_SELFTEST_IDLE) {
+		dev_err(dev, "selftest not idle before test\n");
+		return -EIO;
+	}
+
+	/* Trigger self-test */
+	ret = regmap_update_bits(ak8974->map,
+			AK8974_CTRL3,
+			AK8974_CTRL3_SELFTEST,
+			AK8974_CTRL3_SELFTEST);
+	if (ret) {
+		dev_err(dev, "could not write CTRL3\n");
+		return ret;
+	}
+
+	msleep(AK8974_SELFTEST_DELAY);
+
+	ret = regmap_read(ak8974->map, AK8974_SELFTEST, &val);
+	if (ret)
+		return ret;
+	if (val != AK8974_SELFTEST_OK) {
+		dev_err(dev, "selftest result NOT OK (%02x)\n", val);
+		return -EIO;
+	}
+
+	ret = regmap_read(ak8974->map, AK8974_SELFTEST, &val);
+	if (ret)
+		return ret;
+	if (val != AK8974_SELFTEST_IDLE) {
+		dev_err(dev, "selftest not idle after test (%02x)\n", val);
+		return -EIO;
+	}
+	dev_dbg(dev, "passed self-test\n");
+
+	return 0;
+}
+
+static int ak8974_get_u16_val(struct ak8974 *ak8974, u8 reg, u16 *val)
+{
+	int ret;
+	u16 bulk;
+
+	ret = regmap_bulk_read(ak8974->map, reg, &bulk, 2);
+	if (ret)
+		return ret;
+	*val = le16_to_cpu(bulk);
+
+	return 0;
+}
+
+static int ak8974_detect(struct ak8974 *ak8974)
+{
+	unsigned int whoami;
+	const char *name;
+	int ret;
+	unsigned int fw;
+	u16 sn;
+
+	ret = regmap_read(ak8974->map, AK8974_WHOAMI, &whoami);
+	if (ret)
+		return ret;
+
+	switch (whoami) {
+	case AK8974_WHOAMI_VALUE_AMI305:
+		name = "ami305";
+		ret = regmap_read(ak8974->map, AMI305_VER, &fw);
+		if (ret)
+			return ret;
+		fw &= 0x7f; /* only bits 0 thru 6 valid */
+		ret = ak8974_get_u16_val(ak8974, AMI305_SN, &sn);
+		if (ret)
+			return ret;
+		dev_info(&ak8974->i2c->dev,
+			 "detected %s, FW ver %02x, S/N: %04x\n",
+			 name, fw, sn);
+		break;
+	case AK8974_WHOAMI_VALUE_AK8974:
+		name = "ak8974";
+		dev_info(&ak8974->i2c->dev, "detected AK8974\n");
+		break;
+	default:
+		dev_err(&ak8974->i2c->dev, "unsupported device (%02x) ",
+			whoami);
+		return -ENODEV;
+	}
+
+	ak8974->name = name;
+	ak8974->variant = whoami;
+
+	return 0;
+}
+
+static int ak8974_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2,
+			   long mask)
+{
+	struct ak8974 *ak8974 = iio_priv(indio_dev);
+	s16 hw_values[3];
+	int ret = -EINVAL;
+
+	pm_runtime_get_sync(&ak8974->i2c->dev);
+	mutex_lock(&ak8974->lock);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		if (chan->address > 2) {
+			dev_err(&ak8974->i2c->dev, "faulty channel address\n");
+			ret = -EIO;
+			goto out_unlock;
+		}
+		ret = ak8974_trigmeas(ak8974);
+		if (ret)
+			goto out_unlock;
+		ret = ak8974_getresult(ak8974, hw_values);
+		if (ret)
+			goto out_unlock;
+
+		/*
+		 * We read all axes and discard all but one, for optimized
+		 * reading, use the triggered buffer.
+		 */
+		*val = le16_to_cpu(hw_values[chan->address]);
+
+		ret = IIO_VAL_INT;
+	}
+
+ out_unlock:
+	mutex_unlock(&ak8974->lock);
+	pm_runtime_mark_last_busy(&ak8974->i2c->dev);
+	pm_runtime_put_autosuspend(&ak8974->i2c->dev);
+
+	return ret;
+}
+
+static void ak8974_fill_buffer(struct iio_dev *indio_dev)
+{
+	struct ak8974 *ak8974 = iio_priv(indio_dev);
+	int ret;
+	s16 hw_values[8]; /* Three axes + 64bit padding */
+
+	pm_runtime_get_sync(&ak8974->i2c->dev);
+	mutex_lock(&ak8974->lock);
+
+	ret = ak8974_trigmeas(ak8974);
+	if (ret) {
+		dev_err(&ak8974->i2c->dev, "error triggering measure\n");
+		goto out_unlock;
+	}
+	ret = ak8974_getresult(ak8974, hw_values);
+	if (ret) {
+		dev_err(&ak8974->i2c->dev, "error getting measures\n");
+		goto out_unlock;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, hw_values,
+					   iio_get_time_ns(indio_dev));
+
+ out_unlock:
+	mutex_unlock(&ak8974->lock);
+	pm_runtime_mark_last_busy(&ak8974->i2c->dev);
+	pm_runtime_put_autosuspend(&ak8974->i2c->dev);
+}
+
+static irqreturn_t ak8974_handle_trigger(int irq, void *p)
+{
+	const struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+
+	ak8974_fill_buffer(indio_dev);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_mount_matrix *
+ak8974_get_mount_matrix(const struct iio_dev *indio_dev,
+			const struct iio_chan_spec *chan)
+{
+	struct ak8974 *ak8974 = iio_priv(indio_dev);
+
+	return &ak8974->orientation;
+}
+
+static const struct iio_chan_spec_ext_info ak8974_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, ak8974_get_mount_matrix),
+	{ },
+};
+
+#define AK8974_AXIS_CHANNEL(axis, index)				\
+	{								\
+		.type = IIO_MAGN,					\
+		.modified = 1,						\
+		.channel2 = IIO_MOD_##axis,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+		.ext_info = ak8974_ext_info,				\
+		.address = index,					\
+		.scan_index = index,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 16,					\
+			.storagebits = 16,				\
+			.endianness = IIO_LE				\
+		},							\
+	}
+
+static const struct iio_chan_spec ak8974_channels[] = {
+	AK8974_AXIS_CHANNEL(X, 0),
+	AK8974_AXIS_CHANNEL(Y, 1),
+	AK8974_AXIS_CHANNEL(Z, 2),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const unsigned long ak8974_scan_masks[] = { 0x7, 0 };
+
+static const struct iio_info ak8974_info = {
+	.read_raw = &ak8974_read_raw,
+	.driver_module = THIS_MODULE,
+};
+
+static bool ak8974_writeable_reg(struct device *dev, unsigned int reg)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct iio_dev *indio_dev = i2c_get_clientdata(i2c);
+	struct ak8974 *ak8974 = iio_priv(indio_dev);
+
+	switch (reg) {
+	case AK8974_CTRL1:
+	case AK8974_CTRL2:
+	case AK8974_CTRL3:
+	case AK8974_INT_CTRL:
+	case AK8974_INT_THRES:
+	case AK8974_INT_THRES + 1:
+	case AK8974_PRESET:
+	case AK8974_PRESET + 1:
+		return true;
+	case AK8974_OFFSET_X:
+	case AK8974_OFFSET_X + 1:
+	case AK8974_OFFSET_Y:
+	case AK8974_OFFSET_Y + 1:
+	case AK8974_OFFSET_Z:
+	case AK8974_OFFSET_Z + 1:
+		if (ak8974->variant == AK8974_WHOAMI_VALUE_AK8974)
+			return true;
+		return false;
+	case AMI305_OFFSET_X:
+	case AMI305_OFFSET_X + 1:
+	case AMI305_OFFSET_Y:
+	case AMI305_OFFSET_Y + 1:
+	case AMI305_OFFSET_Z:
+	case AMI305_OFFSET_Z + 1:
+		if (ak8974->variant == AK8974_WHOAMI_VALUE_AMI305)
+			return true;
+		return false;
+	default:
+		return false;
+	}
+}
+
+static const struct regmap_config ak8974_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xff,
+	.writeable_reg = ak8974_writeable_reg,
+};
+
+static int ak8974_probe(struct i2c_client *i2c,
+			const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct ak8974 *ak8974;
+	unsigned long irq_trig;
+	int irq = i2c->irq;
+	int ret;
+
+	/* Register with IIO */
+	indio_dev = devm_iio_device_alloc(&i2c->dev, sizeof(*ak8974));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	ak8974 = iio_priv(indio_dev);
+	i2c_set_clientdata(i2c, indio_dev);
+	ak8974->i2c = i2c;
+	mutex_init(&ak8974->lock);
+
+	ret = of_iio_read_mount_matrix(&i2c->dev,
+				       "mount-matrix",
+				       &ak8974->orientation);
+	if (ret)
+		return ret;
+
+	ak8974->regs[0].supply = ak8974_reg_avdd;
+	ak8974->regs[1].supply = ak8974_reg_dvdd;
+
+	ret = devm_regulator_bulk_get(&i2c->dev,
+				      ARRAY_SIZE(ak8974->regs),
+				      ak8974->regs);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "cannot get regulators\n");
+		return ret;
+	}
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "cannot enable regulators\n");
+		return ret;
+	}
+
+	/* Take runtime PM online */
+	pm_runtime_get_noresume(&i2c->dev);
+	pm_runtime_set_active(&i2c->dev);
+	pm_runtime_enable(&i2c->dev);
+
+	ak8974->map = devm_regmap_init_i2c(i2c, &ak8974_regmap_config);
+	if (IS_ERR(ak8974->map)) {
+		dev_err(&i2c->dev, "failed to allocate register map\n");
+		return PTR_ERR(ak8974->map);
+	}
+
+	ret = ak8974_set_power(ak8974, AK8974_PWR_ON);
+	if (ret) {
+		dev_err(&i2c->dev, "could not power on\n");
+		goto power_off;
+	}
+
+	ret = ak8974_detect(ak8974);
+	if (ret) {
+		dev_err(&i2c->dev, "neither AK8974 nor AMI305 found\n");
+		goto power_off;
+	}
+
+	ret = ak8974_selftest(ak8974);
+	if (ret)
+		dev_err(&i2c->dev, "selftest failed (continuing anyway)\n");
+
+	ret = ak8974_reset(ak8974);
+	if (ret) {
+		dev_err(&i2c->dev, "AK8974 reset failed\n");
+		goto power_off;
+	}
+
+	pm_runtime_set_autosuspend_delay(&i2c->dev,
+					 AK8974_AUTOSUSPEND_DELAY);
+	pm_runtime_use_autosuspend(&i2c->dev);
+	pm_runtime_put(&i2c->dev);
+
+	indio_dev->dev.parent = &i2c->dev;
+	indio_dev->channels = ak8974_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ak8974_channels);
+	indio_dev->info = &ak8974_info;
+	indio_dev->available_scan_masks = ak8974_scan_masks;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = ak8974->name;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 ak8974_handle_trigger,
+					 NULL);
+	if (ret) {
+		dev_err(&i2c->dev, "triggered buffer setup failed\n");
+		goto disable_pm;
+	}
+
+	/* If we have a valid DRDY IRQ, make use of it */
+	if (irq > 0) {
+		irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+		if (irq_trig == IRQF_TRIGGER_RISING) {
+			dev_info(&i2c->dev, "enable rising edge DRDY IRQ\n");
+		} else if (irq_trig == IRQF_TRIGGER_FALLING) {
+			ak8974->drdy_active_low = true;
+			dev_info(&i2c->dev, "enable falling edge DRDY IRQ\n");
+		} else {
+			irq_trig = IRQF_TRIGGER_RISING;
+		}
+		irq_trig |= IRQF_ONESHOT;
+		irq_trig |= IRQF_SHARED;
+
+		ret = devm_request_threaded_irq(&i2c->dev,
+						irq,
+						ak8974_drdy_irq,
+						ak8974_drdy_irq_thread,
+						irq_trig,
+						ak8974->name,
+						ak8974);
+		if (ret) {
+			dev_err(&i2c->dev, "unable to request DRDY IRQ "
+				"- proceeding without IRQ\n");
+			goto no_irq;
+		}
+		ak8974->drdy_irq = true;
+	}
+
+no_irq:
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&i2c->dev, "device register failed\n");
+		goto cleanup_buffer;
+	}
+
+	return 0;
+
+cleanup_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+disable_pm:
+	pm_runtime_put_noidle(&i2c->dev);
+	pm_runtime_disable(&i2c->dev);
+	ak8974_set_power(ak8974, AK8974_PWR_OFF);
+power_off:
+	regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
+
+	return ret;
+}
+
+static int __exit ak8974_remove(struct i2c_client *i2c)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(i2c);
+	struct ak8974 *ak8974 = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	pm_runtime_get_sync(&i2c->dev);
+	pm_runtime_put_noidle(&i2c->dev);
+	pm_runtime_disable(&i2c->dev);
+	ak8974_set_power(ak8974, AK8974_PWR_OFF);
+	regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int ak8974_runtime_suspend(struct device *dev)
+{
+	struct ak8974 *ak8974 =
+		iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	ak8974_set_power(ak8974, AK8974_PWR_OFF);
+	regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
+
+	return 0;
+}
+
+static int ak8974_runtime_resume(struct device *dev)
+{
+	struct ak8974 *ak8974 =
+		iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
+	if (ret)
+		return ret;
+	msleep(AK8974_POWERON_DELAY);
+	ret = ak8974_set_power(ak8974, AK8974_PWR_ON);
+	if (ret)
+		goto out_regulator_disable;
+
+	ret = ak8974_configure(ak8974);
+	if (ret)
+		goto out_disable_power;
+
+	return 0;
+
+out_disable_power:
+	ak8974_set_power(ak8974, AK8974_PWR_OFF);
+out_regulator_disable:
+	regulator_bulk_disable(ARRAY_SIZE(ak8974->regs), ak8974->regs);
+
+	return ret;
+}
+#endif /* CONFIG_PM */
+
+static const struct dev_pm_ops ak8974_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(ak8974_runtime_suspend,
+			   ak8974_runtime_resume, NULL)
+};
+
+static const struct i2c_device_id ak8974_id[] = {
+	{"ami305", 0 },
+	{"ak8974", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, ak8974_id);
+
+static const struct of_device_id ak8974_of_match[] = {
+	{ .compatible = "asahi-kasei,ak8974", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, ak8974_of_match);
+
+static struct i2c_driver ak8974_driver = {
+	.driver	 = {
+		.name	= "ak8974",
+		.owner	= THIS_MODULE,
+		.pm = &ak8974_dev_pm_ops,
+		.of_match_table = of_match_ptr(ak8974_of_match),
+	},
+	.probe	  = ak8974_probe,
+	.remove	  = __exit_p(ak8974_remove),
+	.id_table = ak8974_id,
+};
+module_i2c_driver(ak8974_driver);
+
+MODULE_DESCRIPTION("AK8974 and AMI305 3-axis magnetometer driver");
+MODULE_AUTHOR("Samu Onkalo");
+MODULE_AUTHOR("Linus Walleij");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/magnetometer/mag3110.c b/drivers/iio/magnetometer/mag3110.c
index f2be4a049056..f2b3bd7bf862 100644
--- a/drivers/iio/magnetometer/mag3110.c
+++ b/drivers/iio/magnetometer/mag3110.c
@@ -154,34 +154,41 @@ static int mag3110_read_raw(struct iio_dev *indio_dev,
 
 	switch (mask) {
 	case IIO_CHAN_INFO_RAW:
-		if (iio_buffer_enabled(indio_dev))
-			return -EBUSY;
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
 
 		switch (chan->type) {
 		case IIO_MAGN: /* in 0.1 uT / LSB */
 			ret = mag3110_read(data, buffer);
 			if (ret < 0)
-				return ret;
+				goto release;
 			*val = sign_extend32(
 				be16_to_cpu(buffer[chan->scan_index]), 15);
-			return IIO_VAL_INT;
+			ret = IIO_VAL_INT;
+			break;
 		case IIO_TEMP: /* in 1 C / LSB */
 			mutex_lock(&data->lock);
 			ret = mag3110_request(data);
 			if (ret < 0) {
 				mutex_unlock(&data->lock);
-				return ret;
+				goto release;
 			}
 			ret = i2c_smbus_read_byte_data(data->client,
 				MAG3110_DIE_TEMP);
 			mutex_unlock(&data->lock);
 			if (ret < 0)
-				return ret;
+				goto release;
 			*val = sign_extend32(ret, 7);
-			return IIO_VAL_INT;
+			ret = IIO_VAL_INT;
+			break;
 		default:
-			return -EINVAL;
+			ret = -EINVAL;
 		}
+release:
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+
 	case IIO_CHAN_INFO_SCALE:
 		switch (chan->type) {
 		case IIO_MAGN:
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index 1d74b3aafeed..6f84f53dfe54 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -516,7 +516,7 @@ static irqreturn_t sx9500_irq_thread_handler(int irq, void *private)
 		sx9500_push_events(indio_dev);
 
 	if (val & SX9500_CONVDONE_IRQ)
-		complete_all(&data->completion);
+		complete(&data->completion);
 
 out:
 	mutex_unlock(&data->mutex);
diff --git a/drivers/iio/temperature/Kconfig b/drivers/iio/temperature/Kconfig
index c4664e5de791..5ea77a7e261d 100644
--- a/drivers/iio/temperature/Kconfig
+++ b/drivers/iio/temperature/Kconfig
@@ -3,6 +3,22 @@
 #
 menu "Temperature sensors"
 
+config MAXIM_THERMOCOUPLE
+	tristate "Maxim thermocouple sensors"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  If you say yes here you get support for the Maxim series of
+	  thermocouple sensors connected via SPI.
+
+	  Supported sensors:
+	   * MAX6675
+	   * MAX31855
+
+	  This driver can also be built as a module. If so, the module will
+	  be called maxim_thermocouple.
+
 config MLX90614
 	tristate "MLX90614 contact-less infrared sensor"
 	depends on I2C
diff --git a/drivers/iio/temperature/Makefile b/drivers/iio/temperature/Makefile
index 02bc79d49b24..78c3de0dc3f0 100644
--- a/drivers/iio/temperature/Makefile
+++ b/drivers/iio/temperature/Makefile
@@ -2,6 +2,7 @@
 # Makefile for industrial I/O temperature drivers
 #
 
+obj-$(CONFIG_MAXIM_THERMOCOUPLE) += maxim_thermocouple.o
 obj-$(CONFIG_MLX90614) += mlx90614.o
 obj-$(CONFIG_TMP006) += tmp006.o
 obj-$(CONFIG_TSYS01) += tsys01.o
diff --git a/drivers/iio/temperature/maxim_thermocouple.c b/drivers/iio/temperature/maxim_thermocouple.c
new file mode 100644
index 000000000000..030827ec8f3a
--- /dev/null
+++ b/drivers/iio/temperature/maxim_thermocouple.c
@@ -0,0 +1,281 @@
+/*
+ * maxim_thermocouple.c  - Support for Maxim thermocouple chips
+ *
+ * Copyright (C) 2016 Matt Ranostay <mranostay@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define MAXIM_THERMOCOUPLE_DRV_NAME	"maxim_thermocouple"
+
+enum {
+	MAX6675,
+	MAX31855,
+};
+
+const struct iio_chan_spec max6675_channels[] = {
+	{	/* thermocouple temperature */
+		.type = IIO_TEMP,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 13,
+			.storagebits = 16,
+			.shift = 3,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+const struct iio_chan_spec max31855_channels[] = {
+	{	/* thermocouple temperature */
+		.type = IIO_TEMP,
+		.address = 2,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 14,
+			.storagebits = 16,
+			.shift = 2,
+			.endianness = IIO_BE,
+		},
+	},
+	{	/* cold junction temperature */
+		.type = IIO_TEMP,
+		.address = 0,
+		.channel2 = IIO_MOD_TEMP_AMBIENT,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 12,
+			.storagebits = 16,
+			.shift = 4,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+static const unsigned long max31855_scan_masks[] = {0x3, 0};
+
+struct maxim_thermocouple_chip {
+	const struct iio_chan_spec *channels;
+	const unsigned long *scan_masks;
+	u8 num_channels;
+	u8 read_size;
+
+	/* bit-check for valid input */
+	u32 status_bit;
+};
+
+const struct maxim_thermocouple_chip maxim_thermocouple_chips[] = {
+	[MAX6675] = {
+			.channels = max6675_channels,
+			.num_channels = ARRAY_SIZE(max6675_channels),
+			.read_size = 2,
+			.status_bit = BIT(2),
+		},
+	[MAX31855] = {
+			.channels = max31855_channels,
+			.num_channels = ARRAY_SIZE(max31855_channels),
+			.read_size = 4,
+			.scan_masks = max31855_scan_masks,
+			.status_bit = BIT(16),
+		},
+};
+
+struct maxim_thermocouple_data {
+	struct spi_device *spi;
+	const struct maxim_thermocouple_chip *chip;
+
+	u8 buffer[16] ____cacheline_aligned;
+};
+
+static int maxim_thermocouple_read(struct maxim_thermocouple_data *data,
+				   struct iio_chan_spec const *chan, int *val)
+{
+	unsigned int storage_bytes = data->chip->read_size;
+	unsigned int shift = chan->scan_type.shift + (chan->address * 8);
+	unsigned int buf;
+	int ret;
+
+	ret = spi_read(data->spi, (void *) &buf, storage_bytes);
+	if (ret)
+		return ret;
+
+	switch (storage_bytes) {
+	case 2:
+		*val = be16_to_cpu(buf);
+		break;
+	case 4:
+		*val = be32_to_cpu(buf);
+		break;
+	}
+
+	/* check to be sure this is a valid reading */
+	if (*val & data->chip->status_bit)
+		return -EINVAL;
+
+	*val = sign_extend32(*val >> shift, chan->scan_type.realbits - 1);
+
+	return 0;
+}
+
+static irqreturn_t maxim_thermocouple_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct maxim_thermocouple_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = spi_read(data->spi, data->buffer, data->chip->read_size);
+	if (!ret) {
+		iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+						   iio_get_time_ns(indio_dev));
+	}
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int maxim_thermocouple_read_raw(struct iio_dev *indio_dev,
+				       struct iio_chan_spec const *chan,
+				       int *val, int *val2, long mask)
+{
+	struct maxim_thermocouple_data *data = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = maxim_thermocouple_read(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+
+		if (!ret)
+			return IIO_VAL_INT;
+
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->channel2) {
+		case IIO_MOD_TEMP_AMBIENT:
+			*val = 62;
+			*val2 = 500000; /* 1000 * 0.0625 */
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			*val = 250; /* 1000 * 0.25 */
+			ret = IIO_VAL_INT;
+		};
+		break;
+	}
+
+	return ret;
+}
+
+static const struct iio_info maxim_thermocouple_info = {
+	.driver_module = THIS_MODULE,
+	.read_raw = maxim_thermocouple_read_raw,
+};
+
+static int maxim_thermocouple_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct iio_dev *indio_dev;
+	struct maxim_thermocouple_data *data;
+	const struct maxim_thermocouple_chip *chip =
+			&maxim_thermocouple_chips[id->driver_data];
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	indio_dev->info = &maxim_thermocouple_info;
+	indio_dev->name = MAXIM_THERMOCOUPLE_DRV_NAME;
+	indio_dev->channels = chip->channels;
+	indio_dev->available_scan_masks = chip->scan_masks;
+	indio_dev->num_channels = chip->num_channels;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	data = iio_priv(indio_dev);
+	data->spi = spi;
+	data->chip = chip;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+				maxim_thermocouple_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_unreg_buffer;
+
+	return 0;
+
+error_unreg_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
+}
+
+static int maxim_thermocouple_remove(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev = spi_get_drvdata(spi);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id maxim_thermocouple_id[] = {
+	{"max6675", MAX6675},
+	{"max31855", MAX31855},
+	{},
+};
+MODULE_DEVICE_TABLE(spi, maxim_thermocouple_id);
+
+static struct spi_driver maxim_thermocouple_driver = {
+	.driver = {
+		.name	= MAXIM_THERMOCOUPLE_DRV_NAME,
+	},
+	.probe		= maxim_thermocouple_probe,
+	.remove		= maxim_thermocouple_remove,
+	.id_table	= maxim_thermocouple_id,
+};
+module_spi_driver(maxim_thermocouple_driver);
+
+MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>");
+MODULE_DESCRIPTION("Maxim thermocouple sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/iio/light/isl29018.c b/drivers/staging/iio/light/isl29018.c
index 76d9f74e7dcb..f47a17d7f6b3 100644
--- a/drivers/staging/iio/light/isl29018.c
+++ b/drivers/staging/iio/light/isl29018.c
@@ -32,25 +32,25 @@
 #include <linux/iio/sysfs.h>
 #include <linux/acpi.h>
 
-#define CONVERSION_TIME_MS		100
+#define ISL29018_CONV_TIME_MS		100
 
 #define ISL29018_REG_ADD_COMMAND1	0x00
-#define COMMMAND1_OPMODE_SHIFT		5
-#define COMMMAND1_OPMODE_MASK		(7 << COMMMAND1_OPMODE_SHIFT)
-#define COMMMAND1_OPMODE_POWER_DOWN	0
-#define COMMMAND1_OPMODE_ALS_ONCE	1
-#define COMMMAND1_OPMODE_IR_ONCE	2
-#define COMMMAND1_OPMODE_PROX_ONCE	3
+#define ISL29018_CMD1_OPMODE_SHIFT	5
+#define ISL29018_CMD1_OPMODE_MASK	(7 << ISL29018_CMD1_OPMODE_SHIFT)
+#define ISL29018_CMD1_OPMODE_POWER_DOWN	0
+#define ISL29018_CMD1_OPMODE_ALS_ONCE	1
+#define ISL29018_CMD1_OPMODE_IR_ONCE	2
+#define ISL29018_CMD1_OPMODE_PROX_ONCE	3
 
-#define ISL29018_REG_ADD_COMMANDII	0x01
-#define COMMANDII_RESOLUTION_SHIFT	2
-#define COMMANDII_RESOLUTION_MASK	(0x3 << COMMANDII_RESOLUTION_SHIFT)
+#define ISL29018_REG_ADD_COMMAND2	0x01
+#define ISL29018_CMD2_RESOLUTION_SHIFT	2
+#define ISL29018_CMD2_RESOLUTION_MASK	(0x3 << ISL29018_CMD2_RESOLUTION_SHIFT)
 
-#define COMMANDII_RANGE_SHIFT		0
-#define COMMANDII_RANGE_MASK		(0x3 << COMMANDII_RANGE_SHIFT)
+#define ISL29018_CMD2_RANGE_SHIFT	0
+#define ISL29018_CMD2_RANGE_MASK	(0x3 << ISL29018_CMD2_RANGE_SHIFT)
 
-#define COMMANDII_SCHEME_SHIFT		7
-#define COMMANDII_SCHEME_MASK		(0x1 << COMMANDII_SCHEME_SHIFT)
+#define ISL29018_CMD2_SCHEME_SHIFT	7
+#define ISL29018_CMD2_SCHEME_MASK	(0x1 << ISL29018_CMD2_SCHEME_SHIFT)
 
 #define ISL29018_REG_ADD_DATA_LSB	0x02
 #define ISL29018_REG_ADD_DATA_MSB	0x03
@@ -127,13 +127,13 @@ static int isl29018_set_integration_time(struct isl29018_chip *chip,
 	if (i >= ARRAY_SIZE(isl29018_int_utimes[chip->type]))
 		return -EINVAL;
 
-	ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
-				 COMMANDII_RESOLUTION_MASK,
-				 i << COMMANDII_RESOLUTION_SHIFT);
+	ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2,
+				 ISL29018_CMD2_RESOLUTION_MASK,
+				 i << ISL29018_CMD2_RESOLUTION_SHIFT);
 	if (ret < 0)
 		return ret;
 
-	/* keep the same range when integration time changes */
+	/* Keep the same range when integration time changes */
 	int_time = chip->int_time;
 	for (i = 0; i < ARRAY_SIZE(isl29018_scales[int_time]); ++i) {
 		if (chip->scale.scale == isl29018_scales[int_time][i].scale &&
@@ -163,9 +163,9 @@ static int isl29018_set_scale(struct isl29018_chip *chip, int scale, int uscale)
 	if (i >= ARRAY_SIZE(isl29018_scales[chip->int_time]))
 		return -EINVAL;
 
-	ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
-				 COMMANDII_RANGE_MASK,
-				 i << COMMANDII_RANGE_SHIFT);
+	ret = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2,
+				 ISL29018_CMD2_RANGE_MASK,
+				 i << ISL29018_CMD2_RANGE_SHIFT);
 	if (ret < 0)
 		return ret;
 
@@ -183,13 +183,13 @@ static int isl29018_read_sensor_input(struct isl29018_chip *chip, int mode)
 
 	/* Set mode */
 	status = regmap_write(chip->regmap, ISL29018_REG_ADD_COMMAND1,
-			      mode << COMMMAND1_OPMODE_SHIFT);
+			      mode << ISL29018_CMD1_OPMODE_SHIFT);
 	if (status) {
 		dev_err(dev,
 			"Error in setting operating mode err %d\n", status);
 		return status;
 	}
-	msleep(CONVERSION_TIME_MS);
+	msleep(ISL29018_CONV_TIME_MS);
 	status = regmap_read(chip->regmap, ISL29018_REG_ADD_DATA_LSB, &lsb);
 	if (status < 0) {
 		dev_err(dev,
@@ -213,8 +213,8 @@ static int isl29018_read_lux(struct isl29018_chip *chip, int *lux)
 	int lux_data;
 	unsigned int data_x_range;
 
-	lux_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_ALS_ONCE);
-
+	lux_data = isl29018_read_sensor_input(chip,
+					      ISL29018_CMD1_OPMODE_ALS_ONCE);
 	if (lux_data < 0)
 		return lux_data;
 
@@ -230,8 +230,8 @@ static int isl29018_read_ir(struct isl29018_chip *chip, int *ir)
 {
 	int ir_data;
 
-	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
-
+	ir_data = isl29018_read_sensor_input(chip,
+					     ISL29018_CMD1_OPMODE_IR_ONCE);
 	if (ir_data < 0)
 		return ir_data;
 
@@ -249,16 +249,16 @@ static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
 	struct device *dev = regmap_get_device(chip->regmap);
 
 	/* Do proximity sensing with required scheme */
-	status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMANDII,
-				    COMMANDII_SCHEME_MASK,
-				    scheme << COMMANDII_SCHEME_SHIFT);
+	status = regmap_update_bits(chip->regmap, ISL29018_REG_ADD_COMMAND2,
+				    ISL29018_CMD2_SCHEME_MASK,
+				    scheme << ISL29018_CMD2_SCHEME_SHIFT);
 	if (status) {
 		dev_err(dev, "Error in setting operating mode\n");
 		return status;
 	}
 
 	prox_data = isl29018_read_sensor_input(chip,
-					       COMMMAND1_OPMODE_PROX_ONCE);
+					       ISL29018_CMD1_OPMODE_PROX_ONCE);
 	if (prox_data < 0)
 		return prox_data;
 
@@ -267,8 +267,8 @@ static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
 		return 0;
 	}
 
-	ir_data = isl29018_read_sensor_input(chip, COMMMAND1_OPMODE_IR_ONCE);
-
+	ir_data = isl29018_read_sensor_input(chip,
+					     ISL29018_CMD1_OPMODE_IR_ONCE);
 	if (ir_data < 0)
 		return ir_data;
 
@@ -280,7 +280,7 @@ static int isl29018_read_proximity_ir(struct isl29018_chip *chip, int scheme,
 	return 0;
 }
 
-static ssize_t show_scale_available(struct device *dev,
+static ssize_t isl29018_show_scale_available(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -297,7 +297,7 @@ static ssize_t show_scale_available(struct device *dev,
 	return len;
 }
 
-static ssize_t show_int_time_available(struct device *dev,
+static ssize_t isl29018_show_int_time_available(struct device *dev,
 				       struct device_attribute *attr, char *buf)
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -313,8 +313,7 @@ static ssize_t show_int_time_available(struct device *dev,
 	return len;
 }
 
-/* proximity scheme */
-static ssize_t show_prox_infrared_suppression(struct device *dev,
+static ssize_t isl29018_show_prox_infrared_suppression(struct device *dev,
 					      struct device_attribute *attr,
 					      char *buf)
 {
@@ -322,13 +321,13 @@ static ssize_t show_prox_infrared_suppression(struct device *dev,
 	struct isl29018_chip *chip = iio_priv(indio_dev);
 
 	/*
-	 * return the "proximity scheme" i.e. if the chip does on chip
+	 * Return the "proximity scheme" i.e. if the chip does on chip
 	 * infrared suppression (1 means perform on chip suppression)
 	 */
 	return sprintf(buf, "%d\n", chip->prox_scheme);
 }
 
-static ssize_t store_prox_infrared_suppression(struct device *dev,
+static ssize_t isl29018_store_prox_infrared_suppression(struct device *dev,
 					       struct device_attribute *attr,
 					       const char *buf, size_t count)
 {
@@ -338,13 +337,11 @@ static ssize_t store_prox_infrared_suppression(struct device *dev,
 
 	if (kstrtoint(buf, 10, &val))
 		return -EINVAL;
-	if (!(val == 0 || val == 1)) {
-		dev_err(dev, "The mode is not supported\n");
+	if (!(val == 0 || val == 1))
 		return -EINVAL;
-	}
 
 	/*
-	 * get the  "proximity scheme" i.e. if the chip does on chip
+	 * Get the "proximity scheme" i.e. if the chip does on chip
 	 * infrared suppression (1 means perform on chip suppression)
 	 */
 	mutex_lock(&chip->lock);
@@ -354,7 +351,6 @@ static ssize_t store_prox_infrared_suppression(struct device *dev,
 	return count;
 }
 
-/* Channel IO */
 static int isl29018_write_raw(struct iio_dev *indio_dev,
 			      struct iio_chan_spec const *chan,
 			      int val,
@@ -491,13 +487,13 @@ static const struct iio_chan_spec isl29023_channels[] = {
 };
 
 static IIO_DEVICE_ATTR(in_illuminance_integration_time_available, S_IRUGO,
-		       show_int_time_available, NULL, 0);
+		       isl29018_show_int_time_available, NULL, 0);
 static IIO_DEVICE_ATTR(in_illuminance_scale_available, S_IRUGO,
-		      show_scale_available, NULL, 0);
+		      isl29018_show_scale_available, NULL, 0);
 static IIO_DEVICE_ATTR(proximity_on_chip_ambient_infrared_suppression,
 					S_IRUGO | S_IWUSR,
-					show_prox_infrared_suppression,
-					store_prox_infrared_suppression, 0);
+					isl29018_show_prox_infrared_suppression,
+					isl29018_store_prox_infrared_suppression, 0);
 
 #define ISL29018_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
 
@@ -541,7 +537,7 @@ static int isl29035_detect(struct isl29018_chip *chip)
 	if (id != ISL29035_DEVICE_ID)
 		return -ENODEV;
 
-	/* clear out brownout bit */
+	/* Clear brownout bit */
 	return regmap_update_bits(chip->regmap, ISL29035_REG_DEVICE_ID,
 				  ISL29035_BOUT_MASK, 0);
 }
@@ -574,7 +570,7 @@ static int isl29018_chip_init(struct isl29018_chip *chip)
 	 * conversions, clear the test registers, and then rewrite all
 	 * registers to the desired values.
 	 * ...
-	 * FOR ISL29011, ISL29018, ISL29021, ISL29023
+	 * For ISL29011, ISL29018, ISL29021, ISL29023
 	 * 1. Write 0x00 to register 0x08 (TEST)
 	 * 2. Write 0x00 to register 0x00 (CMD1)
 	 * 3. Rewrite all registers to the desired values
@@ -603,7 +599,7 @@ static int isl29018_chip_init(struct isl29018_chip *chip)
 
 	usleep_range(1000, 2000);	/* per data sheet, page 10 */
 
-	/* set defaults */
+	/* Set defaults */
 	status = isl29018_set_scale(chip, chip->scale.scale,
 				    chip->scale.uscale);
 	if (status < 0) {
@@ -635,7 +631,7 @@ static const struct iio_info isl29023_info = {
 	.write_raw = isl29018_write_raw,
 };
 
-static bool is_volatile_reg(struct device *dev, unsigned int reg)
+static bool isl29018_is_volatile_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case ISL29018_REG_ADD_DATA_LSB:
@@ -649,37 +645,32 @@ static bool is_volatile_reg(struct device *dev, unsigned int reg)
 	}
 }
 
-/*
- * isl29018_regmap_config: regmap configuration.
- * Use RBTREE mechanism for caching.
- */
 static const struct regmap_config isl29018_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
-	.volatile_reg = is_volatile_reg,
+	.volatile_reg = isl29018_is_volatile_reg,
 	.max_register = ISL29018_REG_TEST,
 	.num_reg_defaults_raw = ISL29018_REG_TEST + 1,
 	.cache_type = REGCACHE_RBTREE,
 };
 
-/* isl29035_regmap_config: regmap configuration for ISL29035 */
 static const struct regmap_config isl29035_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
-	.volatile_reg = is_volatile_reg,
+	.volatile_reg = isl29018_is_volatile_reg,
 	.max_register = ISL29035_REG_DEVICE_ID,
 	.num_reg_defaults_raw = ISL29035_REG_DEVICE_ID + 1,
 	.cache_type = REGCACHE_RBTREE,
 };
 
-struct chip_info {
+struct isl29018_chip_info {
 	const struct iio_chan_spec *channels;
 	int num_channels;
 	const struct iio_info *indio_info;
 	const struct regmap_config *regmap_cfg;
 };
 
-static const struct chip_info chip_info_tbl[] = {
+static const struct isl29018_chip_info isl29018_chip_info_tbl[] = {
 	[isl29018] = {
 		.channels = isl29018_channels,
 		.num_channels = ARRAY_SIZE(isl29018_channels),
@@ -724,10 +715,8 @@ static int isl29018_probe(struct i2c_client *client,
 	int dev_id = 0;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*chip));
-	if (!indio_dev) {
-		dev_err(&client->dev, "iio allocation fails\n");
+	if (!indio_dev)
 		return -ENOMEM;
-	}
 	chip = iio_priv(indio_dev);
 
 	i2c_set_clientdata(client, indio_dev);
@@ -750,7 +739,7 @@ static int isl29018_probe(struct i2c_client *client,
 	chip->suspended = false;
 
 	chip->regmap = devm_regmap_init_i2c(client,
-				chip_info_tbl[dev_id].regmap_cfg);
+				isl29018_chip_info_tbl[dev_id].regmap_cfg);
 	if (IS_ERR(chip->regmap)) {
 		err = PTR_ERR(chip->regmap);
 		dev_err(&client->dev, "regmap initialization fails: %d\n", err);
@@ -761,19 +750,13 @@ static int isl29018_probe(struct i2c_client *client,
 	if (err)
 		return err;
 
-	indio_dev->info = chip_info_tbl[dev_id].indio_info;
-	indio_dev->channels = chip_info_tbl[dev_id].channels;
-	indio_dev->num_channels = chip_info_tbl[dev_id].num_channels;
+	indio_dev->info = isl29018_chip_info_tbl[dev_id].indio_info;
+	indio_dev->channels = isl29018_chip_info_tbl[dev_id].channels;
+	indio_dev->num_channels = isl29018_chip_info_tbl[dev_id].num_channels;
 	indio_dev->name = name;
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->modes = INDIO_DIRECT_MODE;
-	err = devm_iio_device_register(&client->dev, indio_dev);
-	if (err) {
-		dev_err(&client->dev, "iio registration fails\n");
-		return err;
-	}
-
-	return 0;
+	return devm_iio_device_register(&client->dev, indio_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -840,7 +823,6 @@ static const struct of_device_id isl29018_of_match[] = {
 MODULE_DEVICE_TABLE(of, isl29018_of_match);
 
 static struct i2c_driver isl29018_driver = {
-	.class	= I2C_CLASS_HWMON,
 	.driver	 = {
 			.name = "isl29018",
 			.acpi_match_table = ACPI_PTR(isl29018_acpi_match),
diff --git a/drivers/staging/iio/light/isl29028.c b/drivers/staging/iio/light/isl29028.c
index 2e3b1d64e32a..aa413e5878b9 100644
--- a/drivers/staging/iio/light/isl29028.c
+++ b/drivers/staging/iio/light/isl29028.c
@@ -27,29 +27,27 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/sysfs.h>
 
-#define CONVERSION_TIME_MS		100
+#define ISL29028_CONV_TIME_MS		100
 
 #define ISL29028_REG_CONFIGURE		0x01
 
-#define CONFIGURE_ALS_IR_MODE_ALS	0
-#define CONFIGURE_ALS_IR_MODE_IR	BIT(0)
-#define CONFIGURE_ALS_IR_MODE_MASK	BIT(0)
+#define ISL29028_CONF_ALS_IR_MODE_ALS	0
+#define ISL29028_CONF_ALS_IR_MODE_IR	BIT(0)
+#define ISL29028_CONF_ALS_IR_MODE_MASK	BIT(0)
 
-#define CONFIGURE_ALS_RANGE_LOW_LUX	0
-#define CONFIGURE_ALS_RANGE_HIGH_LUX	BIT(1)
-#define CONFIGURE_ALS_RANGE_MASK	BIT(1)
+#define ISL29028_CONF_ALS_RANGE_LOW_LUX	0
+#define ISL29028_CONF_ALS_RANGE_HIGH_LUX	BIT(1)
+#define ISL29028_CONF_ALS_RANGE_MASK	BIT(1)
 
-#define CONFIGURE_ALS_DIS		0
-#define CONFIGURE_ALS_EN		BIT(2)
-#define CONFIGURE_ALS_EN_MASK		BIT(2)
+#define ISL29028_CONF_ALS_DIS		0
+#define ISL29028_CONF_ALS_EN		BIT(2)
+#define ISL29028_CONF_ALS_EN_MASK	BIT(2)
 
-#define CONFIGURE_PROX_DRIVE		BIT(3)
+#define ISL29028_CONF_PROX_SLP_SH	4
+#define ISL29028_CONF_PROX_SLP_MASK	(7 << ISL29028_CONF_PROX_SLP_SH)
 
-#define CONFIGURE_PROX_SLP_SH		4
-#define CONFIGURE_PROX_SLP_MASK		(7 << CONFIGURE_PROX_SLP_SH)
-
-#define CONFIGURE_PROX_EN		BIT(7)
-#define CONFIGURE_PROX_EN_MASK		BIT(7)
+#define ISL29028_CONF_PROX_EN		BIT(7)
+#define ISL29028_CONF_PROX_EN_MASK	BIT(7)
 
 #define ISL29028_REG_INTERRUPT		0x02
 
@@ -62,10 +60,10 @@
 
 #define ISL29028_NUM_REGS		(ISL29028_REG_TEST2_MODE + 1)
 
-enum als_ir_mode {
-	MODE_NONE = 0,
-	MODE_ALS,
-	MODE_IR
+enum isl29028_als_ir_mode {
+	ISL29028_MODE_NONE = 0,
+	ISL29028_MODE_ALS,
+	ISL29028_MODE_IR,
 };
 
 struct isl29028_chip {
@@ -76,7 +74,7 @@ struct isl29028_chip {
 	bool			enable_prox;
 
 	int			lux_scale;
-	int			als_ir_mode;
+	enum isl29028_als_ir_mode	als_ir_mode;
 };
 
 static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
@@ -91,7 +89,8 @@ static int isl29028_set_proxim_sampling(struct isl29028_chip *chip,
 			break;
 	}
 	return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-			CONFIGURE_PROX_SLP_MASK, sel << CONFIGURE_PROX_SLP_SH);
+				  ISL29028_CONF_PROX_SLP_MASK,
+				  sel << ISL29028_CONF_PROX_SLP_SH);
 }
 
 static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
@@ -100,9 +99,9 @@ static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
 	int val = 0;
 
 	if (enable)
-		val = CONFIGURE_PROX_EN;
+		val = ISL29028_CONF_PROX_EN;
 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-				 CONFIGURE_PROX_EN_MASK, val);
+				 ISL29028_CONF_PROX_EN_MASK, val);
 	if (ret < 0)
 		return ret;
 
@@ -113,40 +112,40 @@ static int isl29028_enable_proximity(struct isl29028_chip *chip, bool enable)
 
 static int isl29028_set_als_scale(struct isl29028_chip *chip, int lux_scale)
 {
-	int val = (lux_scale == 2000) ? CONFIGURE_ALS_RANGE_HIGH_LUX :
-					CONFIGURE_ALS_RANGE_LOW_LUX;
+	int val = (lux_scale == 2000) ? ISL29028_CONF_ALS_RANGE_HIGH_LUX :
+					ISL29028_CONF_ALS_RANGE_LOW_LUX;
 
 	return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-		CONFIGURE_ALS_RANGE_MASK, val);
+		ISL29028_CONF_ALS_RANGE_MASK, val);
 }
 
 static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
-				    enum als_ir_mode mode)
+				    enum isl29028_als_ir_mode mode)
 {
 	int ret = 0;
 
 	switch (mode) {
-	case MODE_ALS:
+	case ISL29028_MODE_ALS:
 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-					 CONFIGURE_ALS_IR_MODE_MASK,
-					 CONFIGURE_ALS_IR_MODE_ALS);
+					 ISL29028_CONF_ALS_IR_MODE_MASK,
+					 ISL29028_CONF_ALS_IR_MODE_ALS);
 		if (ret < 0)
 			return ret;
 
 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-					 CONFIGURE_ALS_RANGE_MASK,
-					 CONFIGURE_ALS_RANGE_HIGH_LUX);
+					 ISL29028_CONF_ALS_RANGE_MASK,
+					 ISL29028_CONF_ALS_RANGE_HIGH_LUX);
 		break;
 
-	case MODE_IR:
+	case ISL29028_MODE_IR:
 		ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-					 CONFIGURE_ALS_IR_MODE_MASK,
-					 CONFIGURE_ALS_IR_MODE_IR);
+					 ISL29028_CONF_ALS_IR_MODE_MASK,
+					 ISL29028_CONF_ALS_IR_MODE_IR);
 		break;
 
-	case MODE_NONE:
+	case ISL29028_MODE_NONE:
 		return regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-			CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_DIS);
+			ISL29028_CONF_ALS_EN_MASK, ISL29028_CONF_ALS_DIS);
 	}
 
 	if (ret < 0)
@@ -154,12 +153,13 @@ static int isl29028_set_als_ir_mode(struct isl29028_chip *chip,
 
 	/* Enable the ALS/IR */
 	ret = regmap_update_bits(chip->regmap, ISL29028_REG_CONFIGURE,
-				 CONFIGURE_ALS_EN_MASK, CONFIGURE_ALS_EN);
+				 ISL29028_CONF_ALS_EN_MASK,
+				 ISL29028_CONF_ALS_EN);
 	if (ret < 0)
 		return ret;
 
 	/* Need to wait for conversion time if ALS/IR mode enabled */
-	mdelay(CONVERSION_TIME_MS);
+	mdelay(ISL29028_CONV_TIME_MS);
 	return 0;
 }
 
@@ -223,14 +223,14 @@ static int isl29028_als_get(struct isl29028_chip *chip, int *als_data)
 	int ret;
 	int als_ir_data;
 
-	if (chip->als_ir_mode != MODE_ALS) {
-		ret = isl29028_set_als_ir_mode(chip, MODE_ALS);
+	if (chip->als_ir_mode != ISL29028_MODE_ALS) {
+		ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_ALS);
 		if (ret < 0) {
 			dev_err(dev,
 				"Error in enabling ALS mode err %d\n", ret);
 			return ret;
 		}
-		chip->als_ir_mode = MODE_ALS;
+		chip->als_ir_mode = ISL29028_MODE_ALS;
 	}
 
 	ret = isl29028_read_als_ir(chip, &als_ir_data);
@@ -256,14 +256,14 @@ static int isl29028_ir_get(struct isl29028_chip *chip, int *ir_data)
 	struct device *dev = regmap_get_device(chip->regmap);
 	int ret;
 
-	if (chip->als_ir_mode != MODE_IR) {
-		ret = isl29028_set_als_ir_mode(chip, MODE_IR);
+	if (chip->als_ir_mode != ISL29028_MODE_IR) {
+		ret = isl29028_set_als_ir_mode(chip, ISL29028_MODE_IR);
 		if (ret < 0) {
 			dev_err(dev,
 				"Error in enabling IR mode err %d\n", ret);
 			return ret;
 		}
-		chip->als_ir_mode = MODE_IR;
+		chip->als_ir_mode = ISL29028_MODE_IR;
 	}
 	return isl29028_read_als_ir(chip, ir_data);
 }
@@ -383,8 +383,8 @@ static int isl29028_read_raw(struct iio_dev *indio_dev,
 }
 
 static IIO_CONST_ATTR(in_proximity_sampling_frequency_available,
-				"1, 3, 5, 10, 13, 20, 83, 100");
-static IIO_CONST_ATTR(in_illuminance_scale_available, "125, 2000");
+				"1 3 5 10 13 20 83 100");
+static IIO_CONST_ATTR(in_illuminance_scale_available, "125 2000");
 
 #define ISL29028_DEV_ATTR(name) (&iio_dev_attr_##name.dev_attr.attr)
 #define ISL29028_CONST_ATTR(name) (&iio_const_attr_##name.dev_attr.attr)
@@ -428,7 +428,7 @@ static int isl29028_chip_init(struct isl29028_chip *chip)
 	chip->enable_prox  = false;
 	chip->prox_sampling = 20;
 	chip->lux_scale = 2000;
-	chip->als_ir_mode = MODE_NONE;
+	chip->als_ir_mode = ISL29028_MODE_NONE;
 
 	ret = regmap_write(chip->regmap, ISL29028_REG_TEST1_MODE, 0x0);
 	if (ret < 0) {
@@ -462,7 +462,7 @@ static int isl29028_chip_init(struct isl29028_chip *chip)
 	return ret;
 }
 
-static bool is_volatile_reg(struct device *dev, unsigned int reg)
+static bool isl29028_is_volatile_reg(struct device *dev, unsigned int reg)
 {
 	switch (reg) {
 	case ISL29028_REG_INTERRUPT:
@@ -478,7 +478,7 @@ static bool is_volatile_reg(struct device *dev, unsigned int reg)
 static const struct regmap_config isl29028_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
-	.volatile_reg = is_volatile_reg,
+	.volatile_reg = isl29028_is_volatile_reg,
 	.max_register = ISL29028_NUM_REGS - 1,
 	.num_reg_defaults_raw = ISL29028_NUM_REGS,
 	.cache_type = REGCACHE_RBTREE,
@@ -546,7 +546,6 @@ static const struct of_device_id isl29028_of_match[] = {
 MODULE_DEVICE_TABLE(of, isl29028_of_match);
 
 static struct i2c_driver isl29028_driver = {
-	.class	= I2C_CLASS_HWMON,
 	.driver  = {
 		.name = "isl29028",
 		.of_match_table = isl29028_of_match,
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
index 75e8685e6df2..24edbc39ab4e 100644
--- a/drivers/staging/iio/meter/ade7854.c
+++ b/drivers/staging/iio/meter/ade7854.c
@@ -23,8 +23,8 @@
 #include "ade7854.h"
 
 static ssize_t ade7854_read_8bit(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
+				 struct device_attribute *attr,
+				 char *buf)
 {
 	int ret;
 	u8 val = 0;
@@ -40,8 +40,8 @@ static ssize_t ade7854_read_8bit(struct device *dev,
 }
 
 static ssize_t ade7854_read_16bit(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
+				  struct device_attribute *attr,
+				  char *buf)
 {
 	int ret;
 	u16 val = 0;
@@ -57,8 +57,8 @@ static ssize_t ade7854_read_16bit(struct device *dev,
 }
 
 static ssize_t ade7854_read_24bit(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
+				  struct device_attribute *attr,
+				  char *buf)
 {
 	int ret;
 	u32 val;
@@ -74,8 +74,8 @@ static ssize_t ade7854_read_24bit(struct device *dev,
 }
 
 static ssize_t ade7854_read_32bit(struct device *dev,
-		struct device_attribute *attr,
-		char *buf)
+				  struct device_attribute *attr,
+				  char *buf)
 {
 	int ret;
 	u32 val = 0;
@@ -91,9 +91,9 @@ static ssize_t ade7854_read_32bit(struct device *dev,
 }
 
 static ssize_t ade7854_write_8bit(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
+				  struct device_attribute *attr,
+				  const char *buf,
+				  size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -112,9 +112,9 @@ error_ret:
 }
 
 static ssize_t ade7854_write_16bit(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
+				   struct device_attribute *attr,
+				   const char *buf,
+				   size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -133,9 +133,9 @@ error_ret:
 }
 
 static ssize_t ade7854_write_24bit(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
+				   struct device_attribute *attr,
+				   const char *buf,
+				   size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
@@ -154,9 +154,9 @@ error_ret:
 }
 
 static ssize_t ade7854_write_32bit(struct device *dev,
-		struct device_attribute *attr,
-		const char *buf,
-		size_t len)
+				   struct device_attribute *attr,
+				   const char *buf,
+				   size_t len)
 {
 	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h
index c02b5ce6c5cd..dd85f3503410 100644
--- a/include/linux/hid-sensor-hub.h
+++ b/include/linux/hid-sensor-hub.h
@@ -236,6 +236,7 @@ struct hid_sensor_common {
 	struct hid_sensor_hub_attribute_info report_state;
 	struct hid_sensor_hub_attribute_info power_state;
 	struct hid_sensor_hub_attribute_info sensitivity;
+	struct work_struct work;
 };
 
 /* Convert from hid unit expo to regular exponent */
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 3d672f72e7ec..9edccfba1ffb 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -165,6 +165,18 @@ struct iio_channel
 *iio_channel_cb_get_channels(const struct iio_cb_buffer *cb_buffer);
 
 /**
+ * iio_channel_cb_get_iio_dev() - get access to the underlying device.
+ * @cb_buffer:		The callback buffer from whom we want the device
+ *			information.
+ *
+ * This function allows one to obtain information about the device.
+ * The primary aim is to allow drivers that are consuming a device to query
+ * things like current trigger.
+ */
+struct iio_dev
+*iio_channel_cb_get_iio_dev(const struct iio_cb_buffer *cb_buffer);
+
+/**
  * iio_read_channel_raw() - read from a given channel
  * @chan:		The channel being queried.
  * @val:		Value read back.
diff --git a/tools/iio/lsiio.c b/tools/iio/lsiio.c
index 3d650e668252..ab0f5cf16025 100644
--- a/tools/iio/lsiio.c
+++ b/tools/iio/lsiio.c
@@ -51,7 +51,8 @@ static int dump_channels(const char *dev_dir_name)
 
 	while (ent = readdir(dp), ent)
 		if (check_prefix(ent->d_name, "in_") &&
-		    check_postfix(ent->d_name, "_raw"))
+		   (check_postfix(ent->d_name, "_raw") ||
+		    check_postfix(ent->d_name, "_input")))
 			printf("   %-10s\n", ent->d_name);
 
 	return (closedir(dp) == -1) ? -errno : 0;