diff options
| author | Claudiu Beznea | 2021-09-15 10:48:36 +0300 |
|---|---|---|
| committer | Nicolas Ferre | 2021-10-04 12:16:58 +0200 |
| commit | dbe68bc9e82b6951ff88285ccffc191d872d9a01 (patch) | |
| tree | 95ef9339fe07e79940ae1f2e4489e4b3b6118214 | |
| parent | 968f6e9d51e2da6eade2afb65629ab87a8a0faf3 (diff) | |
ARM: dts: at91: sama7g5ek: to not touch slew-rate for SDMMC pins
With commit c709135e576b ("pinctrl: at91-pio4: add support for slew-rate")
and commit cbde6c823bfa ("pinctrl: at91-pio4: Fix slew rate disablement")
the slew-rate is enabled by default for each configured pin. The datasheet
specifies at chapter "Output Driver AC Characteristics" that HSIO
drivers (use in SDMMCx and QSPI0 peripherals), don't have a slewrate
setting but are rather calibrated against an external 1% resistor mounted
on the SDMMCx_CAL or QSPI0_CAL pins. Depending on the target signal
frequency and the external load, it is possible to adjust their target
output impedance. Thus set slew-rate = <0> for SDMMC (QSPI is not enabled
at the moment in device tree).
Fixes: 7540629e2fc7 ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20210915074836.6574-3-claudiu.beznea@microchip.com
| -rw-r--r-- | arch/arm/boot/dts/at91-sama7g5ek.dts | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-sama7g5ek.dts b/arch/arm/boot/dts/at91-sama7g5ek.dts index 30b67cad5f14..f3d6aaa3a78d 100644 --- a/arch/arm/boot/dts/at91-sama7g5ek.dts +++ b/arch/arm/boot/dts/at91-sama7g5ek.dts @@ -558,6 +558,7 @@ <PIN_PA8__SDMMC0_DAT5>, <PIN_PA9__SDMMC0_DAT6>, <PIN_PA10__SDMMC0_DAT7>; + slew-rate = <0>; bias-pull-up; }; @@ -565,6 +566,7 @@ pinmux = <PIN_PA0__SDMMC0_CK>, <PIN_PA2__SDMMC0_RSTN>, <PIN_PA11__SDMMC0_DS>; + slew-rate = <0>; bias-pull-up; }; }; @@ -576,6 +578,7 @@ <PIN_PC0__SDMMC1_DAT1>, <PIN_PC1__SDMMC1_DAT2>, <PIN_PC2__SDMMC1_DAT3>; + slew-rate = <0>; bias-pull-up; }; @@ -584,6 +587,7 @@ <PIN_PB28__SDMMC1_RSTN>, <PIN_PC5__SDMMC1_1V8SEL>, <PIN_PC4__SDMMC1_CD>; + slew-rate = <0>; bias-pull-up; }; }; @@ -595,11 +599,13 @@ <PIN_PD6__SDMMC2_DAT1>, <PIN_PD7__SDMMC2_DAT2>, <PIN_PD8__SDMMC2_DAT3>; + slew-rate = <0>; bias-pull-up; }; ck { pinmux = <PIN_PD4__SDMMC2_CK>; + slew-rate = <0>; bias-pull-up; }; }; |