ARM: omap1: move omap15xx local bus handling to usb.c

Commit 38225f2ef2f4 ("ARM/omap1: switch to use dma_direct_set_offset for
lbus DMA offsets") removed a lot of mach/memory.h, but left the USB
offset handling split into arch/arm/mach-omap1/usb.c and
drivers/usb/host/ohci-omap.c.

This can cause a randconfig build warning that now fails the build
with -Werror:

arch/arm/mach-omap1/usb.c:561:30: error: 'omap_1510_usb_ohci_nb' defined but not used [-Werror=unused-variable]
  561 | static struct notifier_block omap_1510_usb_ohci_nb = {
      |                              ^~~~~~~~~~~~~~~~~~~~~

Move it all into the platform file to get rid of the final
location that relies on mach/memory.h.

Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20210927144118.2464881-1-arnd@kernel.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

4 files changed, 86 insertions, 116 deletions

diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
index 36bc0000cb6a..ba3a350479c8 100644
--- a/arch/arm/mach-omap1/include/mach/memory.h
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -9,16 +9,4 @@
 /* REVISIT: omap1 legacy drivers still rely on this */
 #include <mach/soc.h>
 
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- */
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
 #endif
diff --git a/arch/arm/mach-omap1/usb.c b/arch/arm/mach-omap1/usb.c
index 86d3b3c157af..e60831c82b78 100644
--- a/arch/arm/mach-omap1/usb.c
+++ b/arch/arm/mach-omap1/usb.c
@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-map-ops.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
 
@@ -206,8 +207,6 @@ static inline void udc_device_init(struct omap_usb_config *pdata)
 
 #endif
 
-#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-
 /* The dmamask must be set for OHCI to work */
 static u64 ohci_dmamask = ~(u32)0;
 
@@ -236,20 +235,15 @@ static struct platform_device ohci_device = {
 
 static inline void ohci_device_init(struct omap_usb_config *pdata)
 {
+	if (!IS_ENABLED(CONFIG_USB_OHCI_HCD))
+		return;
+
 	if (cpu_is_omap7xx())
 		ohci_resources[1].start = INT_7XX_USB_HHC_1;
 	pdata->ohci_device = &ohci_device;
 	pdata->ocpi_enable = &ocpi_enable;
 }
 
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
 #if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
 
 static struct resource otg_resources[] = {
@@ -534,33 +528,87 @@ bad:
 }
 
 #ifdef	CONFIG_ARCH_OMAP15XX
+/* OMAP-1510 OHCI has its own MMU for DMA */
+#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
+#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
+#define OMAP1510_LB_MMU_CTL	0xfffec208
+#define OMAP1510_LB_MMU_LCK	0xfffec224
+#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
+#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
+#define OMAP1510_LB_MMU_CAM_L	0xfffec230
+#define OMAP1510_LB_MMU_RAM_H	0xfffec234
+#define OMAP1510_LB_MMU_RAM_L	0xfffec238
 
-/* ULPD_DPLL_CTRL */
-#define DPLL_IOB		(1 << 13)
-#define DPLL_PLL_ENABLE		(1 << 4)
-#define DPLL_LOCK		(1 << 0)
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus.
+ */
+#define OMAP1510_LB_OFFSET	   UL(0x30000000)
 
-/* ULPD_APLL_CTRL */
-#define APLL_NDPLL_SWITCH	(1 << 0)
+/*
+ * OMAP-1510 specific Local Bus clock on/off
+ */
+static int omap_1510_local_bus_power(int on)
+{
+	if (on) {
+		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
+		udelay(200);
+	} else {
+		omap_writel(0, OMAP1510_LB_MMU_CTL);
+	}
 
-static int omap_1510_usb_ohci_notifier(struct notifier_block *nb,
-		unsigned long event, void *data)
+	return 0;
+}
+
+/*
+ * OMAP-1510 specific Local Bus initialization
+ * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
+ *       See also arch/mach-omap/memory.h for __virt_to_dma() and
+ *       __dma_to_virt() which need to match with the physical
+ *       Local Bus address below.
+ */
+static int omap_1510_local_bus_init(void)
 {
-	struct device *dev = data;
+	unsigned int tlb;
+	unsigned long lbaddr, physaddr;
+
+	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+	       OMAP1510_LB_CLOCK_DIV);
+
+	/* Configure the Local Bus MMU table */
+	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
+		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
+		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
+		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
+		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+		       OMAP1510_LB_MMU_CAM_L);
+		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
+		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
+		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
+		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
+	}
 
-	if (event != BUS_NOTIFY_ADD_DEVICE)
-		return NOTIFY_DONE;
+	/* Enable the walking table */
+	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
+	udelay(200);
 
-	if (strncmp(dev_name(dev), "ohci", 4) == 0 &&
-	    dma_direct_set_offset(dev, PHYS_OFFSET, OMAP1510_LB_OFFSET,
-			(u64)-1))
-		WARN_ONCE(1, "failed to set DMA offset\n");
-	return NOTIFY_OK;
+	return 0;
 }
 
-static struct notifier_block omap_1510_usb_ohci_nb = {
-	.notifier_call		= omap_1510_usb_ohci_notifier,
-};
+static void omap_1510_local_bus_reset(void)
+{
+	omap_1510_local_bus_power(1);
+	omap_1510_local_bus_init();
+}
+
+/* ULPD_DPLL_CTRL */
+#define DPLL_IOB		(1 << 13)
+#define DPLL_PLL_ENABLE		(1 << 4)
+#define DPLL_LOCK		(1 << 0)
+
+/* ULPD_APLL_CTRL */
+#define APLL_NDPLL_SWITCH	(1 << 0)
 
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
@@ -616,19 +664,19 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	if (config->register_host) {
+	if (IS_ENABLED(CONFIG_USB_OHCI_HCD) && config->register_host) {
 		int status;
 
-		bus_register_notifier(&platform_bus_type,
-				      &omap_1510_usb_ohci_nb);
 		ohci_device.dev.platform_data = config;
+		dma_direct_set_offset(&ohci_device.dev, PHYS_OFFSET,
+				      OMAP1510_LB_OFFSET, (u64)-1);
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
 		/* hcd explicitly gates 48MHz */
+
+		config->lb_reset = omap_1510_local_bus_reset;
 	}
-#endif
 }
 
 #else
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index 0b3722770760..ded9738392e4 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -40,17 +40,6 @@
 #include <mach/usb.h>
 
 
-/* OMAP-1510 OHCI has its own MMU for DMA */
-#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
-#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
-#define OMAP1510_LB_MMU_CTL	0xfffec208
-#define OMAP1510_LB_MMU_LCK	0xfffec224
-#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
-#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
-#define OMAP1510_LB_MMU_CAM_L	0xfffec230
-#define OMAP1510_LB_MMU_RAM_H	0xfffec234
-#define OMAP1510_LB_MMU_RAM_L	0xfffec238
-
 #define DRIVER_DESC "OHCI OMAP driver"
 
 struct ohci_omap_priv {
@@ -104,61 +93,6 @@ static int omap_ohci_transceiver_power(struct ohci_omap_priv *priv, int on)
 	return 0;
 }
 
-#ifdef CONFIG_ARCH_OMAP15XX
-/*
- * OMAP-1510 specific Local Bus clock on/off
- */
-static int omap_1510_local_bus_power(int on)
-{
-	if (on) {
-		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
-		udelay(200);
-	} else {
-		omap_writel(0, OMAP1510_LB_MMU_CTL);
-	}
-
-	return 0;
-}
-
-/*
- * OMAP-1510 specific Local Bus initialization
- * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
- *       See also arch/mach-omap/memory.h for __virt_to_dma() and
- *       __dma_to_virt() which need to match with the physical
- *       Local Bus address below.
- */
-static int omap_1510_local_bus_init(void)
-{
-	unsigned int tlb;
-	unsigned long lbaddr, physaddr;
-
-	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
-	       OMAP1510_LB_CLOCK_DIV);
-
-	/* Configure the Local Bus MMU table */
-	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
-		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
-		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
-		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
-		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
-		       OMAP1510_LB_MMU_CAM_L);
-		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
-		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
-		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
-		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
-	}
-
-	/* Enable the walking table */
-	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
-	udelay(200);
-
-	return 0;
-}
-#else
-#define omap_1510_local_bus_power(x)	{}
-#define omap_1510_local_bus_init()	{}
-#endif
-
 #ifdef	CONFIG_USB_OTG
 
 static void start_hnp(struct ohci_hcd *ohci)
@@ -229,10 +163,8 @@ static int ohci_omap_reset(struct usb_hcd *hcd)
 
 	omap_ohci_clock_power(priv, 1);
 
-	if (cpu_is_omap15xx()) {
-		omap_1510_local_bus_power(1);
-		omap_1510_local_bus_init();
-	}
+	if (config->lb_reset)
+		config->lb_reset();
 
 	ret = ohci_setup(hcd);
 	if (ret < 0)
diff --git a/include/linux/platform_data/usb-omap1.h b/include/linux/platform_data/usb-omap1.h
index 43b5ce139c37..878e572a78bf 100644
--- a/include/linux/platform_data/usb-omap1.h
+++ b/include/linux/platform_data/usb-omap1.h
@@ -48,6 +48,8 @@ struct omap_usb_config {
 	u32 (*usb2_init)(unsigned nwires, unsigned alt_pingroup);
 
 	int (*ocpi_enable)(void);
+
+	void (*lb_reset)(void);
 };
 
 #endif /* __LINUX_USB_OMAP1_H */