Merge tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 - new AXP20X USB Power driver
 - new Qualcomm SMBB driver
 - new TPS65217 Charger driver
 - BQ24257: add BQ24250/BQ24251 support
 - overhaul bq27x00 battery driver, rename to bq27xxx
 - misc fixes and cleanups

* tag 'for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (54 commits)
  power: bq27xxx_battery: Remove unneeded dependency in Kconfig
  power: bq27xxx_battery: move irq handler to i2c section
  power: bq27xxx_battery: fix platform probe
  twl4030_charger: add missing iio dependency
  power_supply: charger-manager: add missing of_node_put
  Documentation: power: bq24257: Document exported sysfs entries
  power: bq24257: Add various device-specific sysfs properties
  power: bq24257: Allow input current limit sysfs access
  power: bq24257: Add input DPM voltage threshold setting support
  power: bq24257: Add over voltage protection setting support
  power: bq24257: Add SW-based approach for Power Good determination
  power: bq24257: Allow manual setting of input current limit
  power: bq24257: Add bit definition for temp sense enable
  power: bq24257: Add basic support for bq24250/bq24251
  dt: power: bq24257-charger: Cover additional devices
  power: bq24257: Simplify bq24257_power_supply_init()
  power: bq24257: Use managed power supply register
  power: bq24257: Streamline input current limit setup
  power: bq24257: Remove IRQ config through stat-gpios
  power: bq27xxx_battery: fix signedness bug in bq27xxx_battery_read_health()
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-power b/Documentation/ABI/testing/sysfs-class-power
index 369d2a2d7d3e..fa05719f9981 100644
--- a/Documentation/ABI/testing/sysfs-class-power
+++ b/Documentation/ABI/testing/sysfs-class-power
@@ -74,3 +74,61 @@ Description:
 
 		Valid values:
 		- 0 - 70 (minutes), step by 10 (rounded down)
+
+What:		/sys/class/power_supply/bq24257-charger/ovp_voltage
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry configures the overvoltage protection feature of bq24257-
+		type charger devices. This feature protects the device and other
+		components against damage from overvoltage on the input supply. See
+		device datasheet for details.
+
+		Valid values:
+		- 6000000, 6500000, 7000000, 8000000, 9000000, 9500000, 10000000,
+		  10500000 (all uV)
+
+What:		/sys/class/power_supply/bq24257-charger/in_dpm_voltage
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry configures the input dynamic power path management voltage of
+		bq24257-type charger devices. Once the supply drops to the configured
+		voltage, the input current limit is reduced down to prevent the further
+		drop of the supply. When the IC enters this mode, the charge current is
+		lower than the set value. See device datasheet for details.
+
+		Valid values:
+		- 4200000, 4280000, 4360000, 4440000, 4520000, 4600000, 4680000,
+		  4760000 (all uV)
+
+What:		/sys/class/power_supply/bq24257-charger/high_impedance_enable
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry allows enabling the high-impedance mode of bq24257-type
+		charger devices. If enabled, it places the charger IC into low power
+		standby mode with the switch mode controller disabled. When disabled,
+		the charger operates normally. See device datasheet for details.
+
+		Valid values:
+		- 1: enabled
+		- 0: disabled
+
+What:		/sys/class/power_supply/bq24257-charger/sysoff_enable
+Date:		October 2015
+KernelVersion:	4.4.0
+Contact:	Andreas Dannenberg <dannenberg@ti.com>
+Description:
+		This entry allows enabling the sysoff mode of bq24257-type charger
+		devices. If enabled and the input is removed, the internal battery FET
+		is turned off in order to reduce the leakage from the BAT pin to less
+		than 1uA. Note that on some devices/systems this disconnects the battery
+		from the system. See device datasheet for details.
+
+		Valid values:
+		- 1: enabled
+		- 0: disabled