diff options
author | Mauro Carvalho Chehab | 2021-06-05 14:40:12 +0200 |
---|---|---|
committer | Mauro Carvalho Chehab | 2021-06-16 07:26:46 +0200 |
commit | 6ef43d273e8562366035d8086008e4000a270fd8 (patch) | |
tree | 5adaef0cb0771415a0416350e66877f5084187b2 /Documentation/admin-guide/media | |
parent | a169c44e58190bbdaf9c8d345cd445eec2c2b010 (diff) |
media: admin-guide: avoid using ReST :doc:`foo` markup
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Diffstat (limited to 'Documentation/admin-guide/media')
-rw-r--r-- | Documentation/admin-guide/media/bt8xx.rst | 15 | ||||
-rw-r--r-- | Documentation/admin-guide/media/bttv.rst | 21 | ||||
-rw-r--r-- | Documentation/admin-guide/media/saa7134.rst | 3 |
3 files changed, 21 insertions, 18 deletions
diff --git a/Documentation/admin-guide/media/bt8xx.rst b/Documentation/admin-guide/media/bt8xx.rst index 1382ada1e38e..3589f6ab7e46 100644 --- a/Documentation/admin-guide/media/bt8xx.rst +++ b/Documentation/admin-guide/media/bt8xx.rst @@ -15,11 +15,12 @@ Authors: General information ------------------- -This class of cards has a bt878a as the PCI interface, and require the bttv driver -for accessing the i2c bus and the gpio pins of the bt8xx chipset. +This class of cards has a bt878a as the PCI interface, and require the bttv +driver for accessing the i2c bus and the gpio pins of the bt8xx chipset. -Please see :doc:`bttv-cardlist` for a complete list of Cards based on the -Conexant Bt8xx PCI bridge supported by the Linux Kernel. +Please see Documentation/admin-guide/media/bttv-cardlist.rst for a complete +list of Cards based on the Conexant Bt8xx PCI bridge supported by the +Linux Kernel. In order to be able to compile the kernel, some config options should be enabled:: @@ -80,7 +81,7 @@ for dvb-bt8xx drivers by passing modprobe parameters may be necessary. Running TwinHan and Clones ~~~~~~~~~~~~~~~~~~~~~~~~~~ -As shown at :doc:`bttv-cardlist`, TwinHan and +As shown at Documentation/admin-guide/media/bttv-cardlist.rst, TwinHan and clones use ``card=113`` modprobe parameter. So, in order to properly detect it for devices without EEPROM, you should use:: @@ -105,12 +106,12 @@ The autodetected values are determined by the cards' "response string". In your logs see f. ex.: dst_get_device_id: Recognize [DSTMCI]. For bug reports please send in a complete log with verbose=4 activated. -Please also see :doc:`ci`. +Please also see Documentation/admin-guide/media/ci.rst. Running multiple cards ~~~~~~~~~~~~~~~~~~~~~~ -See :doc:`bttv-cardlist` for a complete list of +See Documentation/admin-guide/media/bttv-cardlist.rst for a complete list of Card ID. Some examples: =========================== === diff --git a/Documentation/admin-guide/media/bttv.rst b/Documentation/admin-guide/media/bttv.rst index 0ef1f203104d..125f6f47123d 100644 --- a/Documentation/admin-guide/media/bttv.rst +++ b/Documentation/admin-guide/media/bttv.rst @@ -24,7 +24,8 @@ If your board has digital TV, you'll also need:: ./scripts/config -m DVB_BT8XX -In this case, please see :doc:`bt8xx` for additional notes. +In this case, please see Documentation/admin-guide/media/bt8xx.rst +for additional notes. Make bttv work with your card ----------------------------- @@ -39,7 +40,7 @@ If it doesn't bttv likely could not autodetect your card and needs some insmod options. The most important insmod option for bttv is "card=n" to select the correct card type. If you get video but no sound you've very likely specified the wrong (or no) card type. A list of supported -cards is in :doc:`bttv-cardlist`. +cards is in Documentation/admin-guide/media/bttv-cardlist.rst. If bttv takes very long to load (happens sometimes with the cheap cards which have no tuner), try adding this to your modules configuration @@ -57,8 +58,8 @@ directory should be enough for it to be autoload during the driver's probing mode (e. g. when the Kernel boots or when the driver is manually loaded via ``modprobe`` command). -If your card isn't listed in :doc:`bttv-cardlist` or if you have -trouble making audio work, please read :ref:`still_doesnt_work`. +If your card isn't listed in Documentation/admin-guide/media/bttv-cardlist.rst +or if you have trouble making audio work, please read :ref:`still_doesnt_work`. Autodetecting cards @@ -77,8 +78,8 @@ the Subsystem ID in the second line, looks like this: only bt878-based cards can have a subsystem ID (which does not mean that every card really has one). bt848 cards can't have a Subsystem ID and therefore can't be autodetected. There is a list with the ID's -at :doc:`bttv-cardlist` (in case you are interested or want to mail -patches with updates). +at Documentation/admin-guide/media/bttv-cardlist.rst +(in case you are interested or want to mail patches with updates). .. _still_doesnt_work: @@ -259,15 +260,15 @@ bug. It is very helpful if you can tell where exactly it broke With a hard freeze you probably doesn't find anything in the logfiles. The only way to capture any kernel messages is to hook up a serial console and let some terminal application log the messages. /me uses -screen. See :doc:`/admin-guide/serial-console` for details on setting -up a serial console. +screen. See Documentation/admin-guide/serial-console.rst for details on +setting up a serial console. -Read :doc:`/admin-guide/bug-hunting` to learn how to get any useful +Read Documentation/admin-guide/bug-hunting.rst to learn how to get any useful information out of a register+stack dump printed by the kernel on protection faults (so-called "kernel oops"). If you run into some kind of deadlock, you can try to dump a call trace -for each process using sysrq-t (see :doc:`/admin-guide/sysrq`). +for each process using sysrq-t (see Documentation/admin-guide/sysrq.rst). This way it is possible to figure where *exactly* some process in "D" state is stuck. diff --git a/Documentation/admin-guide/media/saa7134.rst b/Documentation/admin-guide/media/saa7134.rst index 7ab9c70b9abe..51eae7eb5ab7 100644 --- a/Documentation/admin-guide/media/saa7134.rst +++ b/Documentation/admin-guide/media/saa7134.rst @@ -50,7 +50,8 @@ To build and install, you should run:: Once the new Kernel is booted, saa7134 driver should be loaded automatically. Depending on the card you might have to pass ``card=<nr>`` as insmod option. -If so, please check :doc:`saa7134-cardlist` for valid choices. +If so, please check Documentation/admin-guide/media/saa7134-cardlist.rst +for valid choices. Once you have your card type number, you can pass a modules configuration via a file (usually, it is either ``/etc/modules.conf`` or some file at |