Merge tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - New CEC driver: Extron DA HD 4K Plus

 - Lots of driver fixes, cleanups and improvements

* tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits)
  media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode()
  media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable
  media: atomisp: set lock before calling vb2_queue_init()
  media: atomisp: Improve binary finding debug logging
  media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
  media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
  media: atomisp: add missing wait_prepare/finish ops
  media: atomisp: Remove unused declaration
  media: atomisp: use clamp() in compute_coring()
  media: atomisp: use clamp() in ia_css_eed1_8_encode()
  media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output()
  media: atomisp: Replace rarely used macro from math_support.h
  media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h
  media: atomisp: bnr: fix trailing statement
  media: atomisp: move trailing */ to separate lines
  media: atomisp: move trailing statement to next line.
  media: atomisp: Fix trailing statement in ia_css_de.host.c
  media: atomisp: Fix spelling mistakes in atomisp.h
  media: atomisp: Fix spelling mistakes in atomisp_platform.h
  media: atomisp: Fix spelling mistake in csi_rx_public.h
  ...

4 files changed, 112 insertions, 13 deletions

diff --git a/Documentation/admin-guide/media/cec.rst b/Documentation/admin-guide/media/cec.rst
index 6b30e355cf23..92690e1f2183 100644
--- a/Documentation/admin-guide/media/cec.rst
+++ b/Documentation/admin-guide/media/cec.rst
@@ -42,10 +42,14 @@ dongles):
   ``persistent_config``: by default this is off, but when set to 1 the driver
   will store the current settings to the device's internal eeprom and restore
   it the next time the device is connected to the USB port.
+
 - RainShadow Tech. Note: this driver does not support the persistent_config
   module option of the Pulse-Eight driver. The hardware supports it, but I
   have no plans to add this feature. But I accept patches :-)
 
+- Extron DA HD 4K PLUS HDMI Distribution Amplifier. See
+  :ref:`extron_da_hd_4k_plus` for more information.
+
 Miscellaneous:
 
 - vivid: emulates a CEC receiver and CEC transmitter.
@@ -378,3 +382,86 @@ it later using ``--analyze-pin``.
 
 You can also use this as a full-fledged CEC device by configuring it
 using ``cec-ctl --tv -p0.0.0.0`` or ``cec-ctl --playback -p1.0.0.0``.
+
+.. _extron_da_hd_4k_plus:
+
+Extron DA HD 4K PLUS CEC Adapter driver
+=======================================
+
+This driver is for the Extron DA HD 4K PLUS series of HDMI Distribution
+Amplifiers: https://www.extron.com/product/dahd4kplusseries
+
+The 2, 4 and 6 port models are supported.
+
+Firmware version 1.02.0001 or higher is required.
+
+Note that older Extron hardware revisions have a problem with the CEC voltage,
+which may mean that CEC will not work. This is fixed in hardware revisions
+E34814 and up.
+
+The CEC support has two modes: the first is a manual mode where userspace has
+to manually control CEC for the HDMI Input and all HDMI Outputs. While this gives
+full control, it is also complicated.
+
+The second mode is an automatic mode, which is selected if the module option
+``vendor_id`` is set. In that case the driver controls CEC and CEC messages
+received in the input will be distributed to the outputs. It is still possible
+to use the /dev/cecX devices to talk to the connected devices directly, but it is
+the driver that configures everything and deals with things like Hotplug Detect
+changes.
+
+The driver also takes care of the EDIDs: /dev/videoX devices are created to
+read the EDIDs and (for the HDMI Input port) to set the EDID.
+
+By default userspace is responsible to set the EDID for the HDMI Input
+according to the EDIDs of the connected displays. But if the ``manufacturer_name``
+module option is set, then the driver will take care of setting the EDID
+of the HDMI Input based on the supported resolutions of the connected displays.
+Currently the driver only supports resolutions 1080p60 and 4kp60: if all connected
+displays support 4kp60, then it will advertise 4kp60 on the HDMI input, otherwise
+it will fall back to an EDID that just reports 1080p60.
+
+The status of the Extron is reported in ``/sys/kernel/debug/cec/cecX/status``.
+
+The extron-da-hd-4k-plus driver implements the following module options:
+
+``debug``
+---------
+
+If set to 1, then all serial port traffic is shown.
+
+``vendor_id``
+-------------
+
+The CEC Vendor ID to report to connected displays.
+
+If set, then the driver will take care of distributing CEC messages received
+on the input to the HDMI outputs. This is done for the following CEC messages:
+
+- <Standby>
+- <Image View On> and <Text View On>
+- <Give Device Power Status>
+- <Set System Audio Mode>
+- <Request Current Latency>
+
+If not set, then userspace is responsible for this, and it will have to
+configure the CEC devices for HDMI Input and the HDMI Outputs manually.
+
+``manufacturer_name``
+---------------------
+
+A three character manufacturer name that is used in the EDID for the HDMI
+Input. If not set, then userspace is reponsible for configuring an EDID.
+If set, then the driver will update the EDID automatically based on the
+resolutions supported by the connected displays, and it will not be possible
+anymore to manually set the EDID for the HDMI Input.
+
+``hpd_never_low``
+-----------------
+
+If set, then the Hotplug Detect pin of the HDMI Input will always be high,
+even if nothing is connected to the HDMI Outputs. If not set (the default)
+then the Hotplug Detect pin of the HDMI input will go low if all the detected
+Hotplug Detect pins of the HDMI Outputs are also low.
+
+This option may be changed dynamically.
diff --git a/Documentation/admin-guide/media/mgb4.rst b/Documentation/admin-guide/media/mgb4.rst
index e434d4a9eeb3..b9da127c074d 100644
--- a/Documentation/admin-guide/media/mgb4.rst
+++ b/Documentation/admin-guide/media/mgb4.rst
@@ -227,8 +227,13 @@ Common FPDL3/GMSL output parameters
     open.*
 
 **frame_rate** (RW):
-    Output video frame rate in frames per second. The default frame rate is
-    60Hz.
+    Output video signal frame rate limit in frames per second. Due to
+    the limited output pixel clock steps, the card can not always generate
+    a frame rate perfectly matching the value required by the connected display.
+    Using this parameter one can limit the frame rate by "crippling" the signal
+    so that the lines are not equal (the porches of the last line differ) but
+    the signal appears like having the exact frame rate to the connected display.
+    The default frame rate limit is 60Hz.
 
 **hsync_polarity** (RW):
     HSYNC signal polarity.
@@ -253,33 +258,33 @@ Common FPDL3/GMSL output parameters
     and there is a non-linear stepping between two consecutive allowed
     frequencies. The driver finds the nearest allowed frequency to the given
     value and sets it. When reading this property, you get the exact
-    frequency set by the driver. The default frequency is 70000kHz.
+    frequency set by the driver. The default frequency is 61150kHz.
 
     *Note: This parameter can not be changed while the output v4l2 device is
     open.*
 
 **hsync_width** (RW):
-    Width of the HSYNC signal in pixels. The default value is 16.
+    Width of the HSYNC signal in pixels. The default value is 40.
 
 **vsync_width** (RW):
-    Width of the VSYNC signal in video lines. The default value is 2.
+    Width of the VSYNC signal in video lines. The default value is 20.
 
 **hback_porch** (RW):
     Number of PCLK pulses between deassertion of the HSYNC signal and the first
-    valid pixel in the video line (marked by DE=1). The default value is 32.
+    valid pixel in the video line (marked by DE=1). The default value is 50.
 
 **hfront_porch** (RW):
     Number of PCLK pulses between the end of the last valid pixel in the video
     line (marked by DE=1) and assertion of the HSYNC signal. The default value
-    is 32.
+    is 50.
 
 **vback_porch** (RW):
     Number of video lines between deassertion of the VSYNC signal and the video
-    line with the first valid pixel (marked by DE=1). The default value is 2.
+    line with the first valid pixel (marked by DE=1). The default value is 31.
 
 **vfront_porch** (RW):
     Number of video lines between the end of the last valid pixel line (marked
-    by DE=1) and assertion of the VSYNC signal. The default value is 2.
+    by DE=1) and assertion of the VSYNC signal. The default value is 30.
 
 FPDL3 specific input parameters
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
diff --git a/Documentation/admin-guide/media/rkisp1.rst b/Documentation/admin-guide/media/rkisp1.rst
index 6f14d9561fa5..6c878c71442f 100644
--- a/Documentation/admin-guide/media/rkisp1.rst
+++ b/Documentation/admin-guide/media/rkisp1.rst
@@ -114,11 +114,18 @@ to be applied to the hardware during a video stream, allowing userspace
 to dynamically modify values such as black level, cross talk corrections
 and others.
 
-The buffer format is defined by struct :c:type:`rkisp1_params_cfg`, and
-userspace should set
+The ISP driver supports two different parameters configuration methods, the
+`fixed parameters format` or the `extensible parameters format`.
+
+When using the `fixed parameters` method the buffer format is defined by struct
+:c:type:`rkisp1_params_cfg`, and userspace should set
 :ref:`V4L2_META_FMT_RK_ISP1_PARAMS <v4l2-meta-fmt-rk-isp1-params>` as the
 dataformat.
 
+When using the `extensible parameters` method the buffer format is defined by
+struct :c:type:`rkisp1_ext_params_cfg`, and userspace should set
+:ref:`V4L2_META_FMT_RK_ISP1_EXT_PARAMS <v4l2-meta-fmt-rk-isp1-ext-params>` as
+the dataformat.
 
 Capturing Video Frames Example
 ==============================
diff --git a/Documentation/admin-guide/media/vivid.rst b/Documentation/admin-guide/media/vivid.rst
index c9d301ab46a3..034ca7c77fb9 100644
--- a/Documentation/admin-guide/media/vivid.rst
+++ b/Documentation/admin-guide/media/vivid.rst
@@ -1343,7 +1343,7 @@ Some Future Improvements
 Just as a reminder and in no particular order:
 
 - Add a virtual alsa driver to test audio
-- Add virtual sub-devices and media controller support
+- Add virtual sub-devices
 - Some support for testing compressed video
 - Add support to loop raw VBI output to raw VBI input
 - Add support to loop teletext sliced VBI output to VBI input
@@ -1358,4 +1358,4 @@ Just as a reminder and in no particular order:
 - Make a thread for the RDS generation, that would help in particular for the
   "Controls" RDS Rx I/O Mode as the read-only RDS controls could be updated
   in real-time.
-- Changing the EDID should cause hotplug detect emulation to happen.
+- Changing the EDID doesn't wait 100 ms before setting the HPD signal.