diff options
| author | Brian Masney | 2018-07-10 21:33:45 -0400 |
|---|---|---|
| committer | Jonathan Cameron | 2018-07-15 09:59:05 +0100 |
| commit | d2b863baf1c7d92969c2a9dcada3c6b14e5dbbc4 (patch) | |
| tree | 6d672af63d4bfc9ae174f134c3d85e546be176f2 /Documentation/devicetree/bindings/iio/pressure | |
| parent | de8df0b9c38d8f232f0df03220ff540a54eaf73d (diff) | |
iio: pressure: bmp280: remove unused options from device tree documentation
There are several options in the device tree documentation that are
no longer relevant for the current in-kernel bmp280 driver so this patch
removes them.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Diffstat (limited to 'Documentation/devicetree/bindings/iio/pressure')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/pressure/bmp085.txt | 7 |
1 files changed, 0 insertions, 7 deletions
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt index c7198a03c906..abcab02504fb 100644 --- a/Documentation/devicetree/bindings/iio/pressure/bmp085.txt +++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.txt @@ -8,10 +8,6 @@ Required properties: "bosch,bme280" Optional properties: -- chip-id: configurable chip id for non-default chip revisions -- temp-measurement-period: temperature measurement period (milliseconds) -- default-oversampling: default oversampling value to be used at startup, - value range is 0-3 with rising sensitivity. - interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ - reset-gpios: a GPIO line handling reset of the sensor: as the line is @@ -24,9 +20,6 @@ Example: pressure@77 { compatible = "bosch,bmp085"; reg = <0x77>; - chip-id = <10>; - temp-measurement-period = <100>; - default-oversampling = <2>; interrupt-parent = <&gpio0>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; |