diff options
author | Mark Brown | 2017-07-03 16:51:30 +0100 |
---|---|---|
committer | Mark Brown | 2017-07-03 16:51:30 +0100 |
commit | 6bf4cd287d6e60755481940386b3d146f7ba3c92 (patch) | |
tree | 5254f97b9ab497417d5484b64177e480ffbb3914 /Documentation/devicetree/bindings/sound | |
parent | 2016d5ed401133539779d8a070abbe42fe9cb3da (diff) | |
parent | 8288591368fcb470024348a9b846f7b3f791be44 (diff) |
Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next
Diffstat (limited to 'Documentation/devicetree/bindings/sound')
4 files changed, 288 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt new file mode 100644 index 000000000000..bac4b1b1060f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -0,0 +1,124 @@ +Audio Graph Card: + +Audio Graph Card specifies audio DAI connections of SoC <-> codec. +It is based on common bindings for device graphs. +see ${LINUX}/Documentation/devicetree/bindings/graph.txt + +Basically, Audio Graph Card property is same as Simple Card. +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt + +Below are same as Simple-Card. + +- label +- dai-format +- frame-master +- bitclock-master +- bitclock-inversion +- frame-inversion +- dai-tdm-slot-num +- dai-tdm-slot-width +- clocks / system-clock-frequency + +Required properties: + +- compatible : "audio-graph-card"; +- dais : list of CPU DAI port{s} + +Example: Single DAI case + + sound_card { + compatible = "audio-graph-card"; + + dais = <&cpu_port>; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + }; + + audio-codec { + ... + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; + +Example: Multi DAI case + + sound-card { + compatible = "audio-graph-card"; + + label = "sound-card"; + + dais = <&cpu_port0 + &cpu_port1 + &cpu_port2>; + }; + + audio-codec@0 { + ... + port { + codec0_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint0>; + }; + }; + }; + + audio-codec@1 { + ... + port { + codec1_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint1>; + }; + }; + }; + + audio-codec@2 { + ... + port { + codec2_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint2>; + }; + }; + }; + + dai-controller { + ... + ports { + cpu_port0: port@0 { + cpu_endpoint0: endpoint { + remote-endpoint = <&codec0_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + cpu_port1: port@1 { + cpu_endpoint1: endpoint { + remote-endpoint = <&codec1_endpoint>; + + dai-format = "i2s"; + ... + }; + }; + cpu_port2: port@2 { + cpu_endpoint2: endpoint { + remote-endpoint = <&codec2_endpoint>; + + dai-format = "i2s"; + ... + }; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt new file mode 100644 index 000000000000..b63c5594bbb3 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -0,0 +1,117 @@ +Audio-Graph-SCU-Card: + +Audio-Graph-SCU-Card is "Audio-Graph-Card" + "ALSA DPCM". + +It is based on common bindings for device graphs. +see ${LINUX}/Documentation/devicetree/bindings/graph.txt + +Basically, Audio-Graph-SCU-Card property is same as +Simple-Card / Simple-SCU-Card / Audio-Graph-Card. +see ${LINUX}/Documentation/devicetree/bindings/sound/simple-card.txt + ${LINUX}/Documentation/devicetree/bindings/sound/simple-scu-card.txt + ${LINUX}/Documentation/devicetree/bindings/sound/audio-graph-card.txt + +Below are same as Simple-Card / Audio-Graph-Card. + +- label +- dai-format +- frame-master +- bitclock-master +- bitclock-inversion +- frame-inversion +- dai-tdm-slot-num +- dai-tdm-slot-width +- clocks / system-clock-frequency + +Below are same as Simple-SCU-Card. + +- convert-rate +- convert-channels +- prefix +- routing + +Required properties: + +- compatible : "audio-graph-scu-card"; +- dais : list of CPU DAI port{s} + +Example 1. Sampling Rate Conversion + + sound_card { + compatible = "audio-graph-scu-card"; + + label = "sound-card"; + prefix = "codec"; + routing = "codec Playback", "DAI0 Playback", + "codec Playback", "DAI1 Playback"; + convert-rate = <48000>; + + dais = <&cpu_port>; + }; + + audio-codec { + ... + + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint>; + }; + }; + }; + + dai-controller { + ... + cpu_port: port { + cpu_endpoint: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + }; + +Example 2. 2 CPU 1 Codec (Mixing) + + sound_card { + compatible = "audio-graph-scu-card"; + + label = "sound-card"; + prefix = "codec"; + routing = "codec Playback", "DAI0 Playback", + "codec Playback", "DAI1 Playback"; + convert-rate = <48000>; + + dais = <&cpu_port0 + &cpu_port1>; + }; + + audio-codec { + ... + + port { + codec_endpoint: endpoint { + remote-endpoint = <&cpu_endpoint0>; + }; + }; + }; + + dai-controller { + ... + ports { + cpu_port0: port { + cpu_endpoint0: endpoint { + remote-endpoint = <&codec_endpoint>; + + dai-format = "left_j"; + ... + }; + }; + cpu_port1: port { + cpu_endpoint1: endpoint { + dai-format = "left_j"; + ... + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 15a7316e4c91..7246bb268bf9 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -83,11 +83,11 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes ** Asynchronous mode ------------------ -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example) sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * SRC Asynchronous mode setting @@ -97,12 +97,12 @@ example) * Inputed 48kHz data will be converted to * system specified Hz */ - convert-rate = <48000>; + simple-audio-card,convert-rate = <48000>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -141,23 +141,23 @@ For more detail information, see below ${LINUX}/sound/soc/sh/rcar/ctu.c - comment of header -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. example) sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... /* * CTU setting * All input data will be converted to 2ch * as output data */ - convert-channels = <2>; + simple-audio-card,convert-channels = <2>; ... - cpu { + simple-audio-card,cpu { sound-dai = <&rcar_sound>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -190,22 +190,22 @@ and these sounds will be merged by MIX. aplay -D plughw:0,0 xxxx.wav & aplay -D plughw:0,1 yyyy.wav -You need to use "renesas,rsrc-card" sound card for it. +You need to use "simple-scu-audio-card" sound card for it. Ex) [MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0] | [MEM] -> [SRC2] -> [CTU03] -+ sound { - compatible = "renesas,rsrc-card"; + compatible = "simple-scu-audio-card"; ... - cpu@0 { + simple-audio-card,cpu@0 { sound-dai = <&rcar_sound 0>; }; - cpu@1 { + simple-audio-card,cpu@1 { sound-dai = <&rcar_sound 1>; }; - codec { + simple-audio-card,codec { ... }; }; @@ -368,6 +368,10 @@ Required properties: see below for detail. - #sound-dai-cells : it must be 0 if your system is using single DAI it must be 1 if your system is using multi DAI +- clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks. +- clock-names : List of necessary clock names. + "ssi-all", "ssi.X", "src.X", "mix.X", "ctu.X", + "dvc.X", "clk_a", "clk_b", "clk_c", "clk_i" Optional properties: - #clock-cells : it must be 0 if your system has audio_clkout @@ -375,6 +379,9 @@ Optional properties: - clock-frequency : for all audio_clkout0/1/2/3 - clkout-lr-asynchronous : boolean property. it indicates that audio_clkoutn is asynchronizes with lr-clock. +- resets : References to SSI resets. +- reset-names : List of valid reset names. + "ssi-all", "ssi.X" SSI subnode properties: - interrupts : Should contain SSI interrupt for PIO transfer diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt index d6fe47ed09af..327d229a51b2 100644 --- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt @@ -1,35 +1,29 @@ -ASoC simple SCU Sound Card +ASoC Simple SCU Sound Card -Simple-Card specifies audio DAI connections of SoC <-> codec. +Simple SCU Sound Card is "Simple Sound Card" + "ALSA DPCM". +For example, you can use this driver if you want to exchange sampling rate convert, +Mixing, etc... Required properties: - compatible : "simple-scu-audio-card" "renesas,rsrc-card" - Optional properties: -- simple-audio-card,name : User specified audio sound card name, one string - property. -- simple-audio-card,cpu : CPU sub-node -- simple-audio-card,codec : CODEC sub-node +- simple-audio-card,name : see simple-audio-card.txt +- simple-audio-card,cpu : see simple-audio-card.txt +- simple-audio-card,codec : see simple-audio-card.txt Optional subnode properties: -- simple-audio-card,format : CPU/CODEC common audio format. - "i2s", "right_j", "left_j" , "dsp_a" - "dsp_b", "ac97", "pdm", "msb", "lsb" -- simple-audio-card,frame-master : Indicates dai-link frame master. - phandle to a cpu or codec subnode. -- simple-audio-card,bitclock-master : Indicates dai-link bit clock master. - phandle to a cpu or codec subnode. -- simple-audio-card,bitclock-inversion : bool property. Add this if the - dai-link uses bit clock inversion. -- simple-audio-card,frame-inversion : bool property. Add this if the - dai-link uses frame clock inversion. +- simple-audio-card,format : see simple-audio-card.txt +- simple-audio-card,frame-master : see simple-audio-card.txt +- simple-audio-card,bitclock-master : see simple-audio-card.txt +- simple-audio-card,bitclock-inversion : see simple-audio-card.txt +- simple-audio-card,frame-inversion : see simple-audio-card.txt - simple-audio-card,convert-rate : platform specified sampling rate convert - simple-audio-card,convert-channels : platform specified converted channel size (2 - 8 ch) -- simple-audio-card,prefix : see audio-routing +- simple-audio-card,prefix : see routing - simple-audio-card,routing : A list of the connections between audio components. Each entry is a pair of strings, the first being the connection's sink, the second being the connection's source. Valid names for sources. @@ -38,32 +32,23 @@ Optional subnode properties: Required CPU/CODEC subnodes properties: -- sound-dai : phandle and port of CPU/CODEC +- sound-dai : see simple-audio-card.txt Optional CPU/CODEC subnodes properties: -- clocks / system-clock-frequency : specify subnode's clock if needed. - it can be specified via "clocks" if system has - clock node (= common clock), or "system-clock-frequency" - (if system doens't support common clock) - If a clock is specified, it is - enabled with clk_prepare_enable() - in dai startup() and disabled with - clk_disable_unprepare() in dai - shutdown(). +- clocks / system-clock-frequency : see simple-audio-card.txt -Example 1. Sampling Rate Covert +Example 1. Sampling Rate Conversion sound { compatible = "simple-scu-audio-card"; simple-audio-card,name = "rsnd-ak4643"; simple-audio-card,format = "left_j"; - simple-audio-card,format = "left_j"; simple-audio-card,bitclock-master = <&sndcodec>; simple-audio-card,frame-master = <&sndcodec>; - simple-audio-card,convert-rate = <48000>; /* see audio_clk_a */ + simple-audio-card,convert-rate = <48000>; simple-audio-card,prefix = "ak4642"; simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", @@ -79,20 +64,18 @@ sound { }; }; -Example 2. 2 CPU 1 Codec +Example 2. 2 CPU 1 Codec (Mixing) sound { - compatible = "renesas,rsrc-card"; - - card-name = "rsnd-ak4643"; - format = "left_j"; - bitclock-master = <&dpcmcpu>; - frame-master = <&dpcmcpu>; + compatible = "simple-scu-audio-card"; - convert-rate = <48000>; /* see audio_clk_a */ + simple-audio-card,name = "rsnd-ak4643"; + simple-audio-card,format = "left_j"; + simple-audio-card,bitclock-master = <&dpcmcpu>; + simple-audio-card,frame-master = <&dpcmcpu>; - audio-prefix = "ak4642"; - audio-routing = "ak4642 Playback", "DAI0 Playback", + simple-audio-card,prefix = "ak4642"; + simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback", "ak4642 Playback", "DAI1 Playback"; dpcmcpu: cpu@0 { |