ASoC: remove zte zx drivers

The zte zx platform is getting removed, so this driver is no
longer needed.

Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210120162553.21666-3-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>

4 files changed, 0 insertions, 126 deletions

diff --git a/Documentation/devicetree/bindings/sound/zte,tdm.txt b/Documentation/devicetree/bindings/sound/zte,tdm.txt
deleted file mode 100644
index 2a07ca655264..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,tdm.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-ZTE TDM DAI driver
-
-Required properties:
-
-- compatible : should be one of the following.
-       * zte,zx296718-tdm
-- reg : physical base address of the controller and length of memory mapped
-    region.
-- clocks : Pairs of phandle and specifier referencing the controller's clocks.
-- clock-names: "wclk" for the wclk.
-               "pclk" for the pclk.
--#clock-cells: should be 1.
-- zte,tdm-dma-sysctrl : Reference to the sysctrl controller controlling
-    the dma. includes:
-	phandle of sysctrl.
-	register offset in sysctrl for control dma.
-	mask of the register that be written to sysctrl.
-
-Example:
-
-	tdm: tdm@1487000 {
-		compatible = "zte,zx296718-tdm";
-		reg = <0x01487000 0x1000>;
-		clocks = <&audiocrm AUDIO_TDM_WCLK>, <&audiocrm AUDIO_TDM_PCLK>;
-		clock-names = "wclk", "pclk";
-		#clock-cells = <1>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&tdm_global_pin>;
-		zte,tdm-dma-sysctrl = <&sysctrl 0x10c 4>;
-	};
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt b/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt
deleted file mode 100644
index 41bb1040eb71..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,zx-aud96p22.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-ZTE ZX AUD96P22 Audio Codec
-
-Required properties:
- - compatible: Must be "zte,zx-aud96p22"
- - #sound-dai-cells: Should be 0
- - reg: I2C bus slave address of AUD96P22
-
-Example:
-
-	i2c0: i2c@1486000 {
-		compatible = "zte,zx296718-i2c";
-		reg = <0x01486000 0x1000>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&audiocrm AUDIO_I2C0_WCLK>;
-		clock-frequency = <1600000>;
-
-		aud96p22: codec@22 {
-			compatible = "zte,zx-aud96p22";
-			#sound-dai-cells = <0>;
-			reg = <0x22>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt b/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
deleted file mode 100644
index 3927251464f0..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,zx-i2s.txt
+++ /dev/null
@@ -1,45 +0,0 @@
-ZTE ZX296702 I2S controller
-
-Required properties:
- - compatible : Must be one of:
-	"zte,zx296718-i2s", "zte,zx296702-i2s"
-	"zte,zx296702-i2s"
- - reg : Must contain I2S core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "wclk" for the wclk, "pclk" for the pclk to the I2S interface.
- - dmas: Pairs of phandle and specifier for the DMA channel that is used by
-   the core. The core expects two dma channels for transmit.
- - dma-names : Must be "tx" and "rx"
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
-please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-	i2s0: i2s@b005000 {
-		#sound-dai-cells = <0>;
-		compatible = "zte,zx296718-i2s", "zte,zx296702-i2s";
-		reg = <0x0b005000 0x1000>;
-		clocks = <&audiocrm AUDIO_I2S0_WCLK>, <&audiocrm AUDIO_I2S0_PCLK>;
-		clock-names = "wclk", "pclk";
-		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 5>, <&dma 6>;
-		dma-names = "tx", "rx";
-	};
-
-	sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "zx296702_snd";
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&i2s0>;
-		};
-
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&acodec>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
deleted file mode 100644
index 09231d7586b2..000000000000
--- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt
+++ /dev/null
@@ -1,27 +0,0 @@
-ZTE ZX296702 SPDIF controller
-
-Required properties:
- - compatible : Must be "zte,zx296702-spdif"
- - reg : Must contain SPDIF core's registers location and length
- - clocks : Pairs of phandle and specifier referencing the controller's clocks.
- - clock-names: "tx" for the clock to the SPDIF interface.
- - dmas: Pairs of phandle and specifier for the DMA channel that is used by
-   the core. The core expects one dma channel for transmit.
- - dma-names : Must be "tx"
-
-For more details on the 'dma', 'dma-names', 'clock' and 'clock-names' properties
-please check:
-	* resource-names.txt
-	* clock/clock-bindings.txt
-	* dma/dma.txt
-
-Example:
-	spdif0: spdif0@b004000 {
-		compatible = "zte,zx296702-spdif";
-		reg = <0x0b004000 0x1000>;
-		clocks = <&lsp0clk ZX296702_SPDIF0_DIV>;
-		clock-names = "tx";
-		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-		dmas = <&dma 4>;
-		dma-names = "tx";
-	};