Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver for STM FingerTip touchscreen

 - a new driver for D-Link DIR-685 touch keys

 - updated list of supported devices in xpad driver

 - other assorted updates and fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (23 commits)
  MAINTAINERS: update input subsystem patterns
  Input: introduce KEY_ASSISTANT
  Input: xpad - sync supported devices with XBCD
  Input: xpad - sync supported devices with 360Controller
  Input: xen-kbdfront - use string constants from PV protocol
  Input: stmfts - mark all PM functions as __maybe_unused
  Input: add support for the STMicroelectronics FingerTip touchscreen
  Input: add D-Link DIR-685 touchkeys driver
  Input: s3c2410_ts - handle return value of clk_prepare_enable
  Input: axp20x-pek - add wakeup support
  Input: synaptics-rmi4 - use %phN to form F34 configuration ID
  Input: synaptics-rmi4 - change a char type to u8
  Input: sparse-keymap - remove sparse_keymap_free()
  Input: tsc2007 - move header file out of I2C realm
  Input: mms114 - move header file out of I2C realm
  Input: mcs - move header file out of I2C realm
  Input: lm8323 - move header file out of I2C realm
  Input: elantech - force relative mode on a certain module
  Input: elan_i2c - add support for fetching chip type on newer hardware
  Input: elan_i2c - check if device is there before really probing
  ...

2 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
new file mode 100644
index 000000000000..10dec1c57abf
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchkeys.txt
@@ -0,0 +1,21 @@
+* D-Link DIR-685 Touchkeys
+
+This is a I2C one-off touchkey controller based on the Cypress Semiconductor
+CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+board inside the router is named E119921.
+
+The touchkey device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: must be "dlink,dir685-touchkeys"
+- reg: the I2C address of the touchkeys
+- interrupts: reference to the interrupt number
+
+Example:
+
+touchkeys@26 {
+	compatible = "dlink,dir685-touchkeys";
+	reg = <0x26>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
new file mode 100644
index 000000000000..9683595cd0f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/st,stmfts.txt
@@ -0,0 +1,43 @@
+* ST-Microelectronics FingerTip touchscreen controller
+
+The ST-Microelectronics FingerTip device provides a basic touchscreen
+functionality. Along with it the user can enable the touchkey which can work as
+a basic HOME and BACK key for phones.
+
+The driver supports also hovering as an absolute single touch event with x, y, z
+coordinates.
+
+Required properties:
+- compatible		: must be "st,stmfts"
+- reg			: I2C slave address, (e.g. 0x49)
+- interrupt-parent	: the phandle to the interrupt controller which provides
+			  the interrupt
+- interrupts		: interrupt specification
+- avdd-supply		: analogic power supply
+- vdd-supply		: power supply
+- touchscreen-size-x	: see touchscreen.txt
+- touchscreen-size-y	: see touchscreen.txt
+
+Optional properties:
+- touch-key-connected	: specifies whether the touchkey feature is connected
+- ledvdd-supply		: power supply to the touch key leds
+
+Example:
+
+i2c@00000000 {
+
+	/* ... */
+
+	touchscreen@49 {
+		compatible = "st,stmfts";
+		reg = <0x49>;
+		interrupt-parent = <&gpa1>;
+		interrupts = <1 IRQ_TYPE_NONE>;
+		touchscreen-size-x = <1599>;
+		touchscreen-size-y = <2559>;
+		touch-key-connected;
+		avdd-supply = <&ldo30_reg>;
+		vdd-supply = <&ldo31_reg>;
+		ledvdd-supply = <&ldo33_reg>;
+	};
+};