Merge tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for TI TPS6594/TPS6593/LP8764 PMICs
   - Add support for Samsung RT5033 Battery Charger
   - Add support for Analog Devices MAX77540 and MAX77541 PMICs

  New Device Support:
   - Add support for SPI to Rockchip RK808 (and friends)
   - Add support for AXP192 PMIC to X-Powers AXP20X
   - Add support for AXP313a PMIC to X-Powers AXP20X
   - Add support for RK806 to Rockchip RK8XX

  Removed Device Support:
   - Removed MFD support for Richtek RT5033 Battery

  Fix-ups:
   - Remove superfluous code
   - Switch I2C drivers from .probe_new() to .probe()
   - Convert over to managed resources (devm_*(), etc)
   - Use dev_err_probe() for returning errors from .probe()
   - Add lots of Device Tree bindings / support
   - Improve cache efficiency by switching to Maple
   - Use own exported namespaces (NS)
   - Include missing and remove superfluous headers
   - Start using / convert to the new shutdown sys-off API
   - Trivial: variable / define renaming
   - Make use of of_property_read_reg() when requesting DT 'reg's

  Bug Fixes:
   - Fix chip revision readout due to incorrect data masking
   - Amend incorrect register and mask values used for charger state
   - Hide unused functionality at compile time
   - Fix resource leaks following error handling routines
   - Return correct error values and fix error handling in general
   - Repair incorrect device names - used for device matching
   - Remedy broken module auto-loading"

* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
  dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  iio: adc: max77541: Add ADI MAX77541 ADC Support
  regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  mfd: Switch two more drivers back to use struct i2c_driver::probe
  dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
  mfd: stmpe: Only disable the regulators if they are enabled
  mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
  mfd: core: Use of_property_read_reg() to parse "reg"
  mfd: stmfx: Nullify stmfx->vdd in case of error
  mfd: stmfx: Fix error path in stmfx_chip_init
  mfd: intel-lpss: Add missing check for platform_get_resource
  mfd: stpmic1: Add PMIC poweroff via sys-off handler
  mfd: stpmic1: Fixup main control register and bits naming
  dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
  mfd: tps65219: Add support for soft shutdown via sys-off API
  mfd: pm8008: Drop bogus i2c module alias
  mfd: pm8008: Fix module autoloading
  mfd: tps65219: Add GPIO cell instance
  ...

12 files changed, 517 insertions, 30 deletions

diff --git a/Documentation/devicetree/bindings/mfd/adi,max77541.yaml b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
new file mode 100644
index 000000000000..c7895b2c38c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/adi,max77541.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MAX77540/MAX77541 PMIC from ADI
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+  MAX77540 is a Power Management IC with 2 buck regulators.
+
+  MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC.
+
+properties:
+  compatible:
+    enum:
+      - adi,max77540
+      - adi,max77541
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    $ref: /schemas/regulator/adi,max77541-regulator.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@69 {
+            compatible = "adi,max77541";
+            reg = <0x69>;
+            interrupt-parent = <&gpio>;
+            interrupts = <16 IRQ_TYPE_EDGE_FALLING>;
+
+            regulators {
+                buck1 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+                buck2 {
+                    regulator-min-microvolt = <500000>;
+                    regulator-max-microvolt = <5200000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
index acb9c54942d9..dc379f3ebf24 100644
--- a/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+++ b/Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
@@ -122,12 +122,6 @@ patternProperties:
       compatible:
         const: gw,gsc-fan
 
-      "#address-cells":
-        const: 1
-
-      "#size-cells":
-        const: 0
-
       reg:
         description: The fan controller base address
         maxItems: 1
@@ -135,8 +129,6 @@ patternProperties:
     required:
       - compatible
       - reg
-      - "#address-cells"
-      - "#size-cells"
 
 required:
   - compatible
@@ -194,8 +186,6 @@ examples:
             };
 
             fan-controller@2c {
-                #address-cells = <1>;
-                #size-cells = <0>;
                 compatible = "gw,gsc-fan";
                 reg = <0x2c>;
             };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
index 36de335a33aa..abcdc0dd4aba 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,spmi-pmic.yaml
@@ -146,6 +146,10 @@ patternProperties:
     type: object
     $ref: /schemas/nvmem/qcom,spmi-sdam.yaml#
 
+  "phy@[0-9a-f]+$":
+    type: object
+    $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml#
+
   "pon@[0-9a-f]+$":
     type: object
     $ref: /schemas/power/reset/qcom,pon.yaml#
diff --git a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
index fe790af7b4fb..5ad9d5deaaf8 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,tcsr.yaml
@@ -34,6 +34,7 @@ properties:
           - qcom,tcsr-ipq5332
           - qcom,tcsr-ipq6018
           - qcom,tcsr-ipq8064
+          - qcom,tcsr-ipq8074
           - qcom,tcsr-ipq9574
           - qcom,tcsr-mdm9615
           - qcom,tcsr-msm8226
diff --git a/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
new file mode 100644
index 000000000000..386b1a50158a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/richtek,rt5033.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 Power Management Integrated Circuit
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  RT5033 is a multifunction device which includes battery charger, fuel gauge,
+  flash LED current source, LDO and synchronous Buck converter for portable
+  applications. It is interfaced to host controller using I2C interface. The
+  battery fuel gauge uses a separate I2C bus.
+
+properties:
+  compatible:
+    const: richtek,rt5033
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    description:
+      The regulators of RT5033 have to be instantiated under a sub-node named
+      "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO
+      voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges
+      from 1.0 V to 3.0 V in 0.1 V steps.
+    type: object
+    patternProperties:
+      "^(SAFE_LDO|LDO|BUCK)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+    additionalProperties: false
+
+  charger:
+    type: object
+    $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    battery: battery {
+        compatible = "simple-battery";
+        precharge-current-microamp = <450000>;
+        constant-charge-current-max-microamp = <1000000>;
+        charge-term-current-microamp = <150000>;
+        precharge-upper-limit-microvolt = <3500000>;
+        constant-charge-voltage-max-microvolt = <4350000>;
+    };
+
+    extcon {
+        usb_con: connector {
+            compatible = "usb-b-connector";
+            label = "micro-USB";
+            type = "micro";
+        };
+    };
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        i2c@0 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <0>;
+
+            fuel-gauge@35 {
+                compatible = "richtek,rt5033-battery";
+                reg = <0x35>;
+
+                interrupt-parent = <&msmgpio>;
+                interrupts = <121 IRQ_TYPE_EDGE_FALLING>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&fg_alert_default>;
+
+                power-supplies = <&rt5033_charger>;
+            };
+        };
+
+        i2c@1 {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            reg = <1>;
+
+            pmic@34 {
+                compatible = "richtek,rt5033";
+                reg = <0x34>;
+
+                interrupt-parent = <&msmgpio>;
+                interrupts = <62 IRQ_TYPE_EDGE_FALLING>;
+
+                pinctrl-names = "default";
+                pinctrl-0 = <&pmic_int_default>;
+
+                regulators {
+                    safe_ldo_reg: SAFE_LDO {
+                        regulator-name = "SAFE_LDO";
+                        regulator-min-microvolt = <4900000>;
+                        regulator-max-microvolt = <4900000>;
+                        regulator-always-on;
+                    };
+                    ldo_reg: LDO {
+                        regulator-name = "LDO";
+                        regulator-min-microvolt = <2800000>;
+                        regulator-max-microvolt = <2800000>;
+                    };
+                    buck_reg: BUCK {
+                        regulator-name = "BUCK";
+                        regulator-min-microvolt = <1200000>;
+                        regulator-max-microvolt = <1200000>;
+                    };
+                };
+
+                rt5033_charger: charger {
+                    compatible = "richtek,rt5033-charger";
+                    monitored-battery = <&battery>;
+                    richtek,usb-connector = <&usb_con>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
index 10c7b408f33a..aea0b7d57d04 100644
--- a/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
+++ b/Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml
@@ -153,29 +153,18 @@ dependencies:
 additionalProperties: false
 
 allOf:
-  - if:
+  - not:
       required:
         - s5m8767,pmic-buck2-uses-gpio-dvs
-    then:
-      properties:
-        s5m8767,pmic-buck3-uses-gpio-dvs: false
-        s5m8767,pmic-buck4-uses-gpio-dvs: false
-
-  - if:
-      required:
         - s5m8767,pmic-buck3-uses-gpio-dvs
-    then:
-      properties:
-        s5m8767,pmic-buck2-uses-gpio-dvs: false
-        s5m8767,pmic-buck4-uses-gpio-dvs: false
-
-  - if:
+  - not:
       required:
+        - s5m8767,pmic-buck2-uses-gpio-dvs
+        - s5m8767,pmic-buck4-uses-gpio-dvs
+  - not:
+      required:
+        - s5m8767,pmic-buck3-uses-gpio-dvs
         - s5m8767,pmic-buck4-uses-gpio-dvs
-    then:
-      properties:
-        s5m8767,pmic-buck2-uses-gpio-dvs: false
-        s5m8767,pmic-buck3-uses-gpio-dvs: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
index 9573e4af949e..97c61097f9e2 100644
--- a/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
+++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.yaml
@@ -184,7 +184,7 @@ properties:
         additionalProperties: false
 
     patternProperties:
-      "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$":
+      "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$":
         description: STPMIC1 voltage regulators supplies
 
       "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$":
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
new file mode 100644
index 000000000000..9d43376bebed
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml
@@ -0,0 +1,193 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI TPS6594 Power Management Integrated Circuit
+
+maintainers:
+  - Julien Panis <jpanis@baylibre.com>
+
+description:
+  TPS6594 is a Power Management IC which provides regulators and others
+  features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and
+  PFSM (Pre-configurable Finite State Machine) managing the state of the device.
+  TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives.
+
+properties:
+  compatible:
+    enum:
+      - ti,lp8764-q1
+      - ti,tps6593-q1
+      - ti,tps6594-q1
+
+  reg:
+    description: I2C slave address or SPI chip select number.
+    maxItems: 1
+
+  ti,primary-pmic:
+    type: boolean
+    description: |
+      Identify the primary PMIC on SPMI bus.
+      A multi-PMIC synchronization scheme is implemented in the PMIC device
+      to synchronize the power state changes with other PMIC devices. This is
+      accomplished through a SPMI bus: the primary PMIC is the controller
+      device on the SPMI bus, and the secondary PMICs are the target devices
+      on the SPMI bus.
+
+  system-power-controller: true
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number, the second cell is used to specify flags.
+      See ../gpio/gpio.txt for more information.
+
+  interrupts:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: List of regulators provided by this controller.
+
+    patternProperties:
+      "^buck([1-5]|12|34|123|1234)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+        unevaluatedProperties: false
+
+      "^ldo[1-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+
+        unevaluatedProperties: false
+
+    allOf:
+      - if:
+          required:
+            - buck12
+        then:
+          properties:
+            buck123: false
+            buck1234: false
+      - if:
+          required:
+            - buck123
+        then:
+          properties:
+            buck34: false
+      - if:
+          required:
+            - buck1234
+        then:
+          properties:
+            buck34: false
+
+    additionalProperties: false
+
+patternProperties:
+  "^buck([1-5]|12|34|123|1234)-supply$":
+    description: Input supply phandle for each buck.
+
+  "^ldo[1-4]-supply$":
+    description: Input supply phandle for each ldo.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        tps6593: pmic@48 {
+            compatible = "ti,tps6593-q1";
+            reg = <0x48>;
+            ti,primary-pmic;
+            system-power-controller;
+
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            pinctrl-names = "default";
+            pinctrl-0 = <&pmic_irq_pins_default>;
+            interrupt-parent = <&mcu_gpio0>;
+            interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
+
+            buck123-supply = <&vcc_3v3_sys>;
+            buck4-supply = <&vcc_3v3_sys>;
+            buck5-supply = <&vcc_3v3_sys>;
+            ldo1-supply = <&vcc_3v3_sys>;
+            ldo2-supply = <&vcc_3v3_sys>;
+            ldo3-supply = <&buck5>;
+            ldo4-supply = <&vcc_3v3_sys>;
+
+            regulators {
+                buck123: buck123 {
+                    regulator-name = "vcc_core";
+                    regulator-min-microvolt = <750000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck4: buck4 {
+                    regulator-name = "vcc_1v1";
+                    regulator-min-microvolt = <1100000>;
+                    regulator-max-microvolt = <1100000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                buck5: buck5 {
+                    regulator-name = "vcc_1v8_sys";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo1: ldo1 {
+                    regulator-name = "vddshv5_sdio";
+                    regulator-min-microvolt = <3300000>;
+                    regulator-max-microvolt = <3300000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo2: ldo2 {
+                    regulator-name = "vpp_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo3: ldo3 {
+                    regulator-name = "vcc_0v85";
+                    regulator-min-microvolt = <850000>;
+                    regulator-max-microvolt = <850000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+
+                ldo4: ldo4 {
+                    regulator-name = "vdda_1v8";
+                    regulator-min-microvolt = <1800000>;
+                    regulator-max-microvolt = <1800000>;
+                    regulator-boot-on;
+                    regulator-always-on;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
index f7f0f2c0421a..9ad55746133b 100644
--- a/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
+++ b/Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
@@ -90,6 +90,7 @@ properties:
     oneOf:
       - enum:
           - x-powers,axp152
+          - x-powers,axp192
           - x-powers,axp202
           - x-powers,axp209
           - x-powers,axp221
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
index 756c16d1727d..b5d8888d03d2 100644
--- a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-battery.yaml
@@ -26,7 +26,7 @@ required:
   - compatible
   - reg
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
new file mode 100644
index 000000000000..5b3edd79a523
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/supply/richtek,rt5033-charger.yaml
@@ -0,0 +1,65 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5033 PMIC Battery Charger
+
+maintainers:
+  - Jakob Hauser <jahau@rocketmail.com>
+
+description:
+  The battery charger of the multifunction device RT5033 has to be instantiated
+  under sub-node named "charger" using the following format.
+
+properties:
+  compatible:
+    const: richtek,rt5033-charger
+
+  monitored-battery:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      Phandle to the monitored battery according to battery.yaml. The battery
+      node needs to contain five parameters.
+
+      precharge-current-microamp:
+      Current of pre-charge mode. The pre-charge current levels are 350 mA
+      to 650 mA programmed by I2C per 100 mA.
+
+      constant-charge-current-max-microamp:
+      Current of fast-charge mode. The fast-charge current levels are 700 mA
+      to 2000 mA programmed by I2C per 100 mA.
+
+      charge-term-current-microamp:
+      This property is end of charge current. Its level ranges from 150 mA
+      to 600 mA. Between 150 mA and 300 mA in 50 mA steps, between 300 mA and
+      600 mA in 100 mA steps.
+
+      precharge-upper-limit-microvolt:
+      Voltage of pre-charge mode. If the battery voltage is below the pre-charge
+      threshold voltage, the charger is in pre-charge mode with pre-charge
+      current. Its levels are 2.3 V to 3.8 V programmed by I2C per 0.1 V.
+
+      constant-charge-voltage-max-microvolt:
+      Battery regulation voltage of constant voltage mode. This voltage levels
+      from 3.65 V to 4.4 V by I2C per 0.025 V.
+
+  richtek,usb-connector:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to a USB connector according to usb-connector.yaml. The connector
+      should be a child of the extcon device.
+
+required:
+  - monitored-battery
+
+additionalProperties: false
+
+examples:
+  - |
+    charger {
+        compatible = "richtek,rt5033-charger";
+        monitored-battery = <&battery>;
+        richtek,usb-connector = <&usb_con>;
+    };
diff --git a/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
new file mode 100644
index 000000000000..9e36d5467b56
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/adi,max77541-regulator.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/adi,max77541-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Buck Converter for MAX77540/MAX77541
+
+maintainers:
+  - Okan Sahin <okan.sahin@analog.com>
+
+description: |
+  This is a part of device tree bindings for ADI MAX77540/MAX77541
+
+  The buck converter is represented as a sub-node of the PMIC node on the device tree.
+
+  The device has two buck regulators.
+  See also Documentation/devicetree/bindings/mfd/adi,max77541.yaml for
+  additional information and example.
+
+patternProperties:
+  "^buck[12]$":
+    type: object
+    $ref: regulator.yaml#
+    additionalProperties: false
+    description: |
+      Buck regulator.
+
+    properties:
+      regulator-name: true
+      regulator-always-on: true
+      regulator-boot-on: true
+      regulator-min-microvolt:
+        minimum: 300000
+      regulator-max-microvolt:
+        maximum: 5200000
+
+additionalProperties: false