Merge tag 'rproc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc

Pull remoteproc updates from Bjorn Andersson:
 "This adds support to the remoteproc core for detaching Linux from a
  running remoteproc, e.g. to reboot Linux while leaving the remoteproc
  running, and it enable this support in the stm32 remoteproc driver.

  It also introduces a property for memory carveouts to track if they
  are iomem or system ram, to enable proper handling of the differences.

  The imx_rproc received a number of fixes and improvements, in
  particular support for attaching to already running remote processors
  and i.MX8MQ and i.MX8MM support.

  The Qualcomm wcss driver gained support for starting and stopping the
  wireless subsystem on QCS404, when not using the TrustZone-based
  validator/loader.

  Finally it brings a few fixes to the TI PRU and to the firmware loader
  for the Qualcomm modem subsystem drivers"

* tag 'rproc-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/andersson/remoteproc: (53 commits)
  remoteproc: stm32: add capability to detach
  dt-bindings: remoteproc: stm32-rproc: add new mailbox channel for detach
  remoteproc: imx_rproc: support remote cores booted before Linux Kernel
  remoteproc: imx_rproc: move memory parsing to rproc_ops
  remoteproc: imx_rproc: enlarge IMX7D_RPROC_MEM_MAX
  remoteproc: imx_rproc: add missing of_node_put
  remoteproc: imx_rproc: fix build error without CONFIG_MAILBOX
  remoteproc: qcom: wcss: Remove unnecessary PTR_ERR()
  remoteproc: qcom: wcss: Fix wrong pointer passed to PTR_ERR()
  remoteproc: qcom: pas: Add modem support for SDX55
  dt-bindings: remoteproc: qcom: pas: Add binding for SDX55
  remoteproc: qcom: wcss: Fix return value check in q6v5_wcss_init_mmio()
  remoteproc: pru: Fix and cleanup firmware interrupt mapping logic
  remoteproc: pru: Fix wrong success return value for fw events
  remoteproc: pru: Fixup interrupt-parent logic for fw events
  remoteproc: qcom: wcnss: Allow specifying firmware-name
  remoteproc: qcom: wcss: explicitly request exclusive reset control
  remoteproc: qcom: wcss: Add non pas wcss Q6 support for QCS404
  dt-bindings: remoteproc: qcom: Add Q6V5 Modem PIL binding for QCS404
  remoteproc: qcom: wcss: populate hardcoded param using driver data
  ...

6 files changed, 124 insertions, 35 deletions

diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
new file mode 100644
index 000000000000..208a628f8d6c
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: NXP i.MX Co-Processor Bindings
+
+description:
+  This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs.
+
+maintainers:
+  - Peng Fan <peng.fan@nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - fsl,imx8mq-cm4
+      - fsl,imx8mm-cm4
+      - fsl,imx7d-cm4
+      - fsl,imx6sx-cm4
+
+  clocks:
+    maxItems: 1
+
+  syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to syscon block which provide access to System Reset Controller
+
+  mbox-names:
+    items:
+      - const: tx
+      - const: rx
+      - const: rxdb
+
+  mboxes:
+    description:
+      This property is required only if the rpmsg/virtio functionality is used.
+      List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB.
+      (see mailbox/fsl,mu.yaml)
+    minItems: 1
+    maxItems: 3
+
+  memory-region:
+    description:
+      If present, a phandle for a reserved memory area that used for vdev buffer,
+      resource table, vring region and others used by remote processor.
+    minItems: 1
+    maxItems: 32
+
+required:
+  - compatible
+  - clocks
+  - syscon
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx7d-clock.h>
+    m4_reserved_sysmem1: cm4@80000000 {
+      reg = <0x80000000 0x80000>;
+    };
+
+    m4_reserved_sysmem2: cm4@81000000 {
+      reg = <0x81000000 0x80000>;
+    };
+
+    imx7d-cm4 {
+      compatible	= "fsl,imx7d-cm4";
+      memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
+      syscon		= <&src>;
+      clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
+    };
+
+  - |
+    #include <dt-bindings/clock/imx8mm-clock.h>
+
+    imx8mm-cm4 {
+      compatible = "fsl,imx8mm-cm4";
+      clocks = <&clk IMX8MM_CLK_M4_DIV>;
+      mbox-names = "tx", "rx", "rxdb";
+      mboxes = <&mu 0 1
+                &mu 1 1
+                &mu 3 1>;
+      memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>;
+      syscon = <&src>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
deleted file mode 100644
index fbcefd965dc4..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt
+++ /dev/null
@@ -1,33 +0,0 @@
-NXP iMX6SX/iMX7D Co-Processor Bindings
-----------------------------------------
-
-This binding provides support for ARM Cortex M4 Co-processor found on some
-NXP iMX SoCs.
-
-Required properties:
-- compatible		Should be one of:
-				"fsl,imx7d-cm4"
-				"fsl,imx6sx-cm4"
-- clocks		Clock for co-processor (See: ../clock/clock-bindings.txt)
-- syscon		Phandle to syscon block which provide access to
-			System Reset Controller
-
-Optional properties:
-- memory-region		list of phandels to the reserved memory regions.
-			(See: ../reserved-memory/reserved-memory.txt)
-
-Example:
-	m4_reserved_sysmem1: cm4@80000000 {
-		reg = <0x80000000 0x80000>;
-	};
-
-	m4_reserved_sysmem2: cm4@81000000 {
-		reg = <0x81000000 0x80000>;
-	};
-
-	imx7d-cm4 {
-		compatible	= "fsl,imx7d-cm4";
-		memory-region	= <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>;
-		syscon		= <&src>;
-		clocks		= <&clks IMX7D_ARM_M4_ROOT_CLK>;
-	};
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
index 1c330a8941f9..229f908fd831 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt
@@ -18,6 +18,7 @@ on the Qualcomm ADSP Hexagon core.
 		    "qcom,sc7180-mpss-pas"
 		    "qcom,sdm845-adsp-pas"
 		    "qcom,sdm845-cdsp-pas"
+                    "qcom,sdx55-mpss-pas"
 		    "qcom,sm8150-adsp-pas"
 		    "qcom,sm8150-cdsp-pas"
 		    "qcom,sm8150-mpss-pas"
@@ -61,6 +62,7 @@ on the Qualcomm ADSP Hexagon core.
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
 	qcom,qcs404-wcss-pas:
 	qcom,sc7180-mpss-pas:
+        qcom,sdx55-mpss-pas:
 	qcom,sm8150-mpss-pas:
 	qcom,sm8350-mpss-pas:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
@@ -128,6 +130,8 @@ on the Qualcomm ADSP Hexagon core.
 	qcom,sm8150-mpss-pas:
 	qcom,sm8350-mpss-pas:
 		    must be "cx", "load_state", "mss"
+        qcom,sdx55-mpss-pas:
+                    must be "cx", "mss"
 	qcom,sm8250-adsp-pas:
 	qcom,sm8350-adsp-pas:
 	qcom,sm8150-slpi-pas:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 7ccd5534b0ae..69c49c7b2cff 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -9,6 +9,7 @@ on the Qualcomm Hexagon core.
 	Definition: must be one of:
 		    "qcom,q6v5-pil",
 		    "qcom,ipq8074-wcss-pil"
+		    "qcom,qcs404-wcss-pil"
 		    "qcom,msm8916-mss-pil",
 		    "qcom,msm8974-mss-pil"
 		    "qcom,msm8996-mss-pil"
@@ -39,6 +40,7 @@ on the Qualcomm Hexagon core.
 		    string:
 	qcom,q6v5-pil:
 	qcom,ipq8074-wcss-pil:
+	qcom,qcs404-wcss-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack"
@@ -67,6 +69,11 @@ on the Qualcomm Hexagon core.
 	Definition: The clocks needed depend on the compatible string:
 	qcom,ipq8074-wcss-pil:
 		    no clock names required
+	qcom,qcs404-wcss-pil:
+		    must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr",
+		    "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc",
+		    "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc",
+		    "lcc_axim_cbc", "lcc_bcr_sleep"
 	qcom,q6v5-pil:
 	qcom,msm8916-mss-pil:
 	qcom,msm8974-mss-pil:
@@ -133,6 +140,14 @@ For the compatible string below the following supplies are required:
 		    booting of the Hexagon core
 
 For the compatible string below the following supplies are required:
+  "qcom,qcs404-wcss-pil"
+- cx-supply:
+	Usage: required
+	Value type: <phandle>
+	Definition: reference to the regulators to be held on behalf of the
+		    booting of the Hexagon core
+
+For the compatible string below the following supplies are required:
   "qcom,msm8996-mss-pil"
 - pll-supply:
 	Usage: required
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
index da09c0d79ac0..a83080b8905c 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
@@ -34,6 +34,12 @@ on the Qualcomm WCNSS core.
 	Definition: should be "wdog", "fatal", optionally followed by "ready",
 		    "handover", "stop-ack"
 
+- firmware-name:
+	Usage: optional
+	Value type: <string>
+	Definition: must list the relative firmware image path for the
+		    WCNSS core. Defaults to "wcnss.mdt".
+
 - vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
 - vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
 - vddpx-supply:
diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
index a1171dfba024..64afdcfb613d 100644
--- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml
@@ -65,16 +65,23 @@ properties:
           Unidirectional channel:
             - from local to remote, where ACK from the remote means that it is
               ready for shutdown
+      - description: |
+          A channel (d) used by the local proc to notify the remote proc that it
+          has to stop interprocessor communnication.
+          Unidirectional channel:
+            - from local to remote, where ACK from the remote means that communnication
+              as been stopped on the remote side.
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   mbox-names:
     items:
       - const: vq0
       - const: vq1
       - const: shutdown
+      - const: detach
     minItems: 1
-    maxItems: 3
+    maxItems: 4
 
   memory-region:
     description: