doc: spelling error changes

Fixed multiple spelling errors.

Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Carlos E. Garcia <carlos@cgarcia.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

13 files changed, 18 insertions, 18 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index af9b4a0d902b..aa71962352ff 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -114,5 +114,5 @@ Boards:
 - AM43x EPOS EVM
   compatible = "ti,am43x-epos-evm", "ti,am4372", "ti,am43"
 
-- DRA7 EVM:  Software Developement Board for DRA7XX
+- DRA7 EVM:  Software Development Board for DRA7XX
   compatible = "ti,dra7-evm", "ti,dra7"
diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
index 7586fb68c072..5fa44f52a0b8 100644
--- a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
+++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
@@ -197,7 +197,7 @@ to be set by the operating system and that are guaranteed to be free of overlaps
 with one another or with the system memory ranges.
 
 Each entry in the property refers to exactly one window. If the operating system
-choses to use a different set of mbus windows, it must ensure that any address
+chooses to use a different set of mbus windows, it must ensure that any address
 translations performed from downstream devices are adapted accordingly.
 
 The operating system may insert additional mbus windows that do not conflict
diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
index 3ddc7ccfe5f3..c306a2d0f2b1 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt
@@ -54,7 +54,7 @@ Optional device specific properties:
         IO 8-15 are bank 2. These chips have two different interrupt outputs:
         One for bank 1 and another for bank 2. If irq-mirror is set, both
         interrupts are generated regardless of the bank that an input change
-        occured on. If it is not set, the interrupt are only generated for the
+        occurred on. If it is not set, the interrupt are only generated for the
         bank they belong to.
         On devices with only one interrupt output this property is useless.
 
diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
index b8653ea97957..e5bc49f764d1 100644
--- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt
@@ -12,7 +12,7 @@ extensions to the Synopsys Designware Mobile Storage Host Controller.
 Required Properties:
 
 * compatible: should be one of the following.
-  - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extentions.
+  - "hisilicon,hi4511-dw-mshc": for controllers with hi4511 specific extensions.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
index 328e990d2546..42e0a9afa100 100644
--- a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt
@@ -3,7 +3,7 @@
 Samsung's SDHCI controller is used as a connectivity interface with external
 MMC, SD and eMMC storage mediums. This file documents differences between the
 core mmc properties described by mmc.txt and the properties used by the
-Samsung implmentation of the SDHCI controller.
+Samsung implementation of the SDHCI controller.
 
 Required SoC Specific Properties:
 - compatible: should be one of the following
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
index 5e1f31b5ff70..eb05255b6788 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nand.txt
@@ -43,7 +43,7 @@ Optional properties:
 		ELM hardware engines should specify this device node in .dtsi
 		Using ELM for ECC error correction frees some CPU cycles.
 
-For inline partiton table parsing (optional):
+For inline partition table parsing (optional):
 
  - #address-cells: should be set to 1
  - #size-cells: should be set to 1
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
index 420b3ab18890..4828c17bb784 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
@@ -30,7 +30,7 @@ Optional properties:
 - gpmc,XXX		Additional GPMC timings and settings parameters. See
 			Documentation/devicetree/bindings/bus/ti-gpmc.txt
 
-Optional properties for partiton table parsing:
+Optional properties for partition table parsing:
 - #address-cells: should be set to 1
 - #size-cells: should be set to 1
 
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
index b7529424ac88..5d8fa527c496 100644
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
@@ -17,7 +17,7 @@ Optional properties:
 
  - dma-channel:		DMA Channel index
 
-For inline partiton table parsing (optional):
+For inline partition table parsing (optional):
 
  - #address-cells: should be set to 1
  - #size-cells: should be set to 1
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
index c119debe6bab..54a6e821d525 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm11351-pinctrl.txt
@@ -73,9 +73,9 @@ Optional Properties (for standard pins):
 				Otherwise:
 					0: fast slew rate
 					1: normal slew rate
-- input-enable:			No arguements. Enable input (does not affect
+- input-enable:			No arguments. Enable input (does not affect
 				output.)
-- input-disable:		No arguements. Disable input (does not affect
+- input-disable:		No arguments. Disable input (does not affect
 				output.)
 - drive-strength:		Integer. Drive strength in mA.  Valid values are
 				2, 4, 6, 8, 10, 12, 14, 16 mA.
@@ -99,9 +99,9 @@ Optional Properties (for I2C pins):
 				Otherwise:
 					0: fast slew rate
 					1: normal slew rate
-- input-enable:			No arguements. Enable input (does not affect
+- input-enable:			No arguments. Enable input (does not affect
 				output.)
-- input-disable:		No arguements. Disable input (does not affect
+- input-disable:		No arguments. Disable input (does not affect
 				output.)
 
 Optional Properties (for HDMI pins):
@@ -111,9 +111,9 @@ Optional Properties (for HDMI pins):
 - slew-rate:			Integer. Controls slew rate.
 					0: Standard(100kbps)& Fast(400kbps) mode
 					1: Highspeed (3.4Mbps) mode
-- input-enable:			No arguements. Enable input (does not affect
+- input-enable:			No arguments. Enable input (does not affect
 				output.)
-- input-disable:		No arguements. Disable input (does not affect
+- input-disable:		No arguments. Disable input (does not affect
 				output.)
 
 Example:
diff --git a/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt
index d7217260589c..5bc63551319e 100644
--- a/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt
+++ b/Documentation/devicetree/bindings/powerpc/4xx/reboot.txt
@@ -1,7 +1,7 @@
 Reboot property to control system reboot on PPC4xx systems:
 
 By setting "reset_type" to one of the following values, the default
-software reset mechanism may be overidden. Here the possible values of
+software reset mechanism may be overridden. Here the possible values of
 "reset_type":
 
       1 - PPC4xx core reset
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
index 9d54eb5a295f..18a88100af94 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/dcsr.txt
@@ -82,7 +82,7 @@ PROPERTIES
 	Which event source asserted the interrupt is captured in an EPU
 	Interrupt Status Register (EPISR0,EPISR1).
 
-	Interrupt numbers are lised in order (perfmon, event0, event1).
+	Interrupt numbers are listed in order (perfmon, event0, event1).
 
 	- interrupt-parent
 	Usage: required
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index e2c7f1e7251a..86074334e342 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -12,7 +12,7 @@ Optional properties:
 - regulator-allow-bypass: allow the regulator to go into bypass mode
 - <name>-supply: phandle to the parent supply/regulator node
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
-  For hardwares which support disabling ramp rate, it should be explicitly
+  For hardware which supports disabling ramp rate, it should be explicitly
   intialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
 - regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
   rail to reach the target voltage, plus/minus whatever tolerance the board
diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt
index e5a4d1b4acfe..cc128ae6134a 100644
--- a/Documentation/devicetree/bindings/spi/spi-bus.txt
+++ b/Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -61,7 +61,7 @@ contain the following properties.
                       used for MISO. Defaults to 1 if not present.
 
 Some SPI controllers and devices support Dual and Quad SPI transfer mode.
-It allows data in SPI system transfered in 2 wires(DUAL) or 4 wires(QUAD).
+It allows data in the SPI system to be transferred in 2 wires(DUAL) or 4 wires(QUAD).
 Now the value that spi-tx-bus-width and spi-rx-bus-width can receive is
 only 1(SINGLE), 2(DUAL) and 4(QUAD).
 Dual/Quad mode is not allowed when 3-wire mode is used.