Merge tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "Lots of changes specific to one of the SoC families.  Some that stick
  out are:

   - mach-qcom gains new features, most importantly SMP support for the
     newer chips (Stephen Boyd, Rohit Vaswani)
   - mvebu gains support for three new SoCs: Armada 375, 380 and 385
     (Thomas Petazzoni and Free-electrons team)
   - SMP support for Rockchips (Heiko Stübner)
   - Lots of i.MX changes (Shawn Guo)
   - Added support for BCM5301x SoC (Hauke Mehrtens)
   - Multiplatform support for Marvell Kirkwood and Dove (Andrew Lunn
     and Sebastian Hesselbarth doing the final part of a long journey)
   - Unify davinci platforms and remove obsolete ones (Sekhar Nori, Arnd
     Bergmann)"

* tag 'soc-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (126 commits)
  ARM: sunxi: Select HAVE_ARM_ARCH_TIMER
  ARM: cache-tauros2: remove ARMv6 code
  ARM: mvebu: don't select CONFIG_NEON
  ARM: davinci: fix DT booting with default defconfig
  ARM: configs: bcm_defconfig: enable bcm590xx regulator support
  ARM: davinci: remove tnetv107x support
  MAINTAINERS: Update ARM STi maintainers
  ARM: restrict BCM_KONA_UART to ARCH_BCM_MOBILE
  ARM: bcm21664: Add board support.
  ARM: sunxi: Add the new watchog compatibles to the reboot code
  ARM: enable ARM_HAS_SG_CHAIN for multiplatform
  ARM: davinci: remove da8xx_omapl_defconfig
  ARM: davinci: da8xx: fix multiple watchdog device registration
  ARM: davinci: add da8xx specific configs to davinci_all_defconfig
  ARM: davinci: enable da8xx build concurrently with older devices
  ARM: BCM5301X: workaround suppress fault
  ARM: BCM5301X: add early debugging support
  ARM: BCM5301X: initial support for the BCM5301X/BCM470X SoCs with ARM CPU
  ARM: mach-bcm: Remove GENERIC_TIME
  ARM: shmobile: APMU: Fix warnings due to improper printk formats
  ...

12 files changed, 248 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/arm/armada-375.txt b/Documentation/devicetree/bindings/arm/armada-375.txt
new file mode 100644
index 000000000000..867d0b80cb8f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-375.txt
@@ -0,0 +1,9 @@
+Marvell Armada 375 Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 375 family shall have the
+following property:
+
+Required root node property:
+
+compatible: must contain "marvell,armada375"
diff --git a/Documentation/devicetree/bindings/arm/armada-38x.txt b/Documentation/devicetree/bindings/arm/armada-38x.txt
new file mode 100644
index 000000000000..11f2330a6554
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/armada-38x.txt
@@ -0,0 +1,10 @@
+Marvell Armada 38x Platforms Device Tree Bindings
+-------------------------------------------------
+
+Boards with a SoC of the Marvell Armada 38x family shall have the
+following property:
+
+Required root node property:
+
+ - compatible: must contain either "marvell,armada380" or
+   "marvell,armada385" depending on the variant of the SoC being used.
diff --git a/Documentation/devicetree/bindings/arm/bcm4708.txt b/Documentation/devicetree/bindings/arm/bcm4708.txt
new file mode 100644
index 000000000000..6b0f49f6f499
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm4708.txt
@@ -0,0 +1,8 @@
+Broadcom BCM4708 device tree bindings
+-------------------------------------------
+
+Boards with the BCM4708 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "brcm,bcm4708";
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 91304353eea4..333f4aea3029 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -180,7 +180,11 @@ nodes to be present and contain the properties described below.
 			  be one of:
 			     "spin-table"
 			     "psci"
-			# On ARM 32-bit systems this property is optional.
+			# On ARM 32-bit systems this property is optional and
+			  can be one of:
+			    "qcom,gcc-msm8660"
+			    "qcom,kpss-acc-v1"
+			    "qcom,kpss-acc-v2"
 
 	- cpu-release-addr
 		Usage: required for systems that have an "enable-method"
@@ -191,6 +195,21 @@ nodes to be present and contain the properties described below.
 			  property identifying a 64-bit zero-initialised
 			  memory location.
 
+	- qcom,saw
+		Usage: required for systems that have an "enable-method"
+		       property value of "qcom,kpss-acc-v1" or
+		       "qcom,kpss-acc-v2"
+		Value type: <phandle>
+		Definition: Specifies the SAW[1] node associated with this CPU.
+
+	- qcom,acc
+		Usage: required for systems that have an "enable-method"
+		       property value of "qcom,kpss-acc-v1" or
+		       "qcom,kpss-acc-v2"
+		Value type: <phandle>
+		Definition: Specifies the ACC[2] node associated with this CPU.
+
+
 Example 1 (dual-cluster big.LITTLE system 32-bit):
 
 	cpus {
@@ -382,3 +401,7 @@ cpus {
 		cpu-release-addr = <0 0x20000000>;
 	};
 };
+
+--
+[1] arm/msm/qcom,saw2.txt
+[2] arm/msm/qcom,kpss-acc.txt
diff --git a/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
new file mode 100644
index 000000000000..0d244b999d10
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/mrvl/feroceon.txt
@@ -0,0 +1,16 @@
+* Marvell Feroceon Cache
+
+Required properties:
+- compatible : Should be either "marvell,feroceon-cache" or
+  	       "marvell,kirkwood-cache".
+
+Optional properties:
+- reg        : Address of the L2 cache control register. Mandatory for
+  	       "marvell,kirkwood-cache", not used by "marvell,feroceon-cache"
+
+
+Example:
+		l2: l2-cache@20128 {
+			compatible = "marvell,kirkwood-cache";
+			reg = <0x20128 0x4>;
+		};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
new file mode 100644
index 000000000000..1333db9acfee
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
@@ -0,0 +1,30 @@
+Krait Processor Sub-system (KPSS) Application Clock Controller (ACC)
+
+The KPSS ACC provides clock, power domain, and reset control to a Krait CPU.
+There is one ACC register region per CPU within the KPSS remapped region as
+well as an alias register region that remaps accesses to the ACC associated
+with the CPU accessing the region.
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: should be one of:
+			"qcom,kpss-acc-v1"
+			"qcom,kpss-acc-v2"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first element specifies the base address and size of
+		    the register region. An optional second element specifies
+		    the base address and size of the alias register region.
+
+Example:
+
+	clock-controller@2088000 {
+		compatible = "qcom,kpss-acc-v2";
+		reg = <0x02088000 0x1000>,
+		      <0x02008000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
new file mode 100644
index 000000000000..1505fb8e131a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/msm/qcom,saw2.txt
@@ -0,0 +1,35 @@
+SPM AVS Wrapper 2 (SAW2)
+
+The SAW2 is a wrapper around the Subsystem Power Manager (SPM) and the
+Adaptive Voltage Scaling (AVS) hardware. The SPM is a programmable
+micro-controller that transitions a piece of hardware (like a processor or
+subsystem) into and out of low power modes via a direct connection to
+the PMIC. It can also be wired up to interact with other processors in the
+system, notifying them when a low power state is entered or exited.
+
+PROPERTIES
+
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: shall contain "qcom,saw2". A more specific value should be
+		    one of:
+			 "qcom,saw2-v1"
+			 "qcom,saw2-v1.1"
+			 "qcom,saw2-v2"
+			 "qcom,saw2-v2.1"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the first element specifies the base address and size of
+		    the register region. An optional second element specifies
+		    the base address and size of the alias register region.
+
+
+Example:
+
+	regulator@2099000 {
+		compatible = "qcom,saw2";
+		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
index 081c6a786c8a..d24ab2ebf8a7 100644
--- a/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
+++ b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt
@@ -1,12 +1,13 @@
 MVEBU System Controller
 -----------------------
-MVEBU (Marvell SOCs: Armada 370/XP, Dove, mv78xx0, Kirkwood, Orion5x)
+MVEBU (Marvell SOCs: Armada 370/375/XP, Dove, mv78xx0, Kirkwood, Orion5x)
 
 Required properties:
 
 - compatible: one of:
 	- "marvell,orion-system-controller"
 	- "marvell,armada-370-xp-system-controller"
+	- "marvell,armada-375-system-controller"
 - reg: Should contain system controller registers location and length.
 
 Example:
diff --git a/Documentation/devicetree/bindings/arm/rockchip/pmu.txt b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
new file mode 100644
index 000000000000..3ee9b428b2f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/pmu.txt
@@ -0,0 +1,16 @@
+Rockchip power-management-unit:
+-------------------------------
+
+The pmu is used to turn off and on different power domains of the SoCs
+This includes the power to the CPU cores.
+
+Required node properties:
+- compatible value : = "rockchip,rk3066-pmu";
+- reg : physical base address and the size of the registers window
+
+Example:
+
+	pmu@20004000 {
+		compatible = "rockchip,rk3066-pmu";
+		reg = <0x20004000 0x100>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
new file mode 100644
index 000000000000..d9416fb8db6f
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/smp-sram.txt
@@ -0,0 +1,30 @@
+Rockchip SRAM for smp bringup:
+------------------------------
+
+Rockchip's smp-capable SoCs use the first part of the sram for the bringup
+of the cores. Once the core gets powered up it executes the code that is
+residing at the very beginning of the sram.
+
+Therefore a reserved section sub-node has to be added to the mmio-sram
+declaration.
+
+Required sub-node properties:
+- compatible : should be "rockchip,rk3066-smp-sram"
+
+The rest of the properties should follow the generic mmio-sram discription
+found in ../../misc/sram.txt
+
+Example:
+
+	sram: sram@10080000 {
+		compatible = "mmio-sram";
+		reg = <0x10080000 0x10000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		smp-sram@10080000 {
+			compatible = "rockchip,rk3066-smp-sram";
+			reg = <0x10080000 0x50>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
index 0fd76c405208..6630d842c7a3 100644
--- a/Documentation/devicetree/bindings/bus/imx-weim.txt
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -8,7 +8,12 @@ The actual devices are instantiated from the child nodes of a WEIM node.
 
 Required properties:
 
- - compatible:		Should be set to "fsl,<soc>-weim"
+ - compatible:		Should contain one of the following:
+			  "fsl,imx1-weim"
+			  "fsl,imx27-weim"
+			  "fsl,imx51-weim"
+			  "fsl,imx50-weim"
+			  "fsl,imx6q-weim"
  - reg:			A resource specifier for the register space
 			(see the example below)
  - clocks:		the clock, see the example below.
@@ -19,6 +24,26 @@ Required properties:
 
 			   <cs-number> 0 <physical address of mapping> <size>
 
+Optional properties:
+
+ - fsl,weim-cs-gpr:	For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+			devices, it should be the phandle to the system General
+			Purpose Register controller that contains WEIM CS GPR
+			register, e.g. IOMUXC_GPR1 on i.MX6Q.  IOMUXC_GPR1[11:0]
+			should be set up as one of the following 4 possible
+			values depending on the CS space configuration.
+
+			IOMUXC_GPR1[11:0]    CS0    CS1    CS2    CS3
+			---------------------------------------------
+				05	    128M     0M     0M     0M
+				033          64M    64M     0M     0M
+				0113         64M    32M    32M     0M
+				01111        32M    32M    32M    32M
+
+			In case that the property is absent, the reset value or
+			what bootloader sets up in IOMUXC_GPR1[11:0] will be
+			used.
+
 Timing property for child nodes. It is mandatory, not optional.
 
  - fsl,weim-cs-timing:	The timing array, contains timing values for the
@@ -43,6 +68,7 @@ Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0x08000000 0x08000000>;
+		fsl,weim-cs-gpr = <&gpr>;
 
 		nor@0,0 {
 			compatible = "cfi-flash";
diff --git a/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
new file mode 100644
index 000000000000..759339c34e4f
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/cirrus,clps711x-intc.txt
@@ -0,0 +1,41 @@
+Cirrus Logic CLPS711X Interrupt Controller
+
+Required properties:
+
+- compatible: Should be "cirrus,clps711x-intc".
+- reg: Specifies base physical address of the registers set.
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source. The value shall be 1.
+
+The interrupt sources are as follows:
+ID	Name	Description
+---------------------------
+1:	BLINT	Battery low (FIQ)
+3:	MCINT	Media changed (FIQ)
+4:	CSINT	CODEC sound
+5:	EINT1	External 1
+6:	EINT2	External 2
+7:	EINT3	External 3
+8:	TC1OI	TC1 under flow
+9:	TC2OI	TC2 under flow
+10:	RTCMI	RTC compare match
+11:	TINT	64Hz tick
+12:	UTXINT1	UART1 transmit FIFO half empty
+13:	URXINT1	UART1 receive FIFO half full
+14:	UMSINT	UART1 modem status changed
+15:	SSEOTI	SSI1 end of transfer
+16:	KBDINT	Keyboard
+17:	SS2RX	SSI2 receive FIFO half or greater full
+18:	SS2TX	SSI2 transmit FIFO less than half empty
+28:	UTXINT2	UART2 transmit FIFO half empty
+29:	URXINT2	UART2 receive FIFO half full
+32:	DAIINT	DAI interface (FIQ)
+
+Example:
+	intc: interrupt-controller {
+		compatible = "cirrus,clps711x-intc";
+		reg = <0x80000000 0x4000>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};