Create/use more directory structure in the Documentation/ tree.

Create Documentation/blockdev/ sub-directory and populate it.
Populate the Documentation/serial/ sub-directory.
Move MSI-HOWTO.txt to Documentation/PCI/.
Move ioctl-number.txt to Documentation/ioctl/.
Update all relevant 00-INDEX files.
Update all relevant Kconfig files and source files.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>

1 files changed, 0 insertions, 98 deletions

diff --git a/Documentation/digiepca.txt b/Documentation/digiepca.txt
deleted file mode 100644
index f2560e22f2c9..000000000000
--- a/Documentation/digiepca.txt
+++ /dev/null
@@ -1,98 +0,0 @@
-NOTE:  This driver is obsolete.  Digi provides a 2.6 driver (dgdm) at
-http://www.digi.com for PCI cards.  They no longer maintain this driver,
-and have no 2.6 driver for ISA cards.
-
-This driver requires a number of user-space tools.  They can be acquired from
-http://www.digi.com, but only works with 2.4 kernels.
-
-
-The Digi Intl. epca driver. 
-----------------------------
-The Digi Intl. epca driver for Linux supports the following boards:
-
-Digi PC/Xem, PC/Xr, PC/Xe, PC/Xi, PC/Xeve 
-Digi EISA/Xem, PCI/Xem, PCI/Xr 
-
-Limitations:
-------------
-Currently the driver only autoprobes for supported PCI boards. 
-
-The Linux MAKEDEV command does not support generating the Digiboard
-Devices.  Users executing digiConfig to setup EISA and PC series cards
-will have their device nodes automatically constructed (cud?? for ~CLOCAL,
-and ttyD?? for CLOCAL).  Users wishing to boot their board from the LILO
-prompt, or those users booting PCI cards may use buildDIGI to construct 
-the necessary nodes. 
-
-Notes:
-------
-This driver may be configured via LILO.  For users who have already configured
-their driver using digiConfig, configuring from LILO will override previous 
-settings.  Multiple boards may be configured by issuing multiple LILO command 
-lines.  For examples see the bottom of this document.
-
-Device names start at 0 and continue up.  Beware of this as previous Digi 
-drivers started device names with 1.
-
-PCI boards are auto-detected and configured by the driver.  PCI boards will
-be allocated device numbers (internally) beginning with the lowest PCI slot
-first.  In other words a PCI card in slot 3 will always have higher device
-nodes than a PCI card in slot 1. 
-
-LILO config examples:
----------------------
-Using LILO's APPEND command, a string of comma separated identifiers or 
-integers can be used to configure supported boards.  The six values in order 
-are:
-
-   Enable/Disable this card or Override,
-   Type of card: PC/Xe (AccelePort) (0), PC/Xeve (1), PC/Xem or PC/Xr (2), 
-                 EISA/Xem (3), PC/64Xe (4), PC/Xi (5), 
-   Enable/Disable alternate pin arrangement,
-   Number of ports on this card,
-   I/O Port where card is configured (in HEX if using string identifiers),
-   Base of memory window (in HEX if using string identifiers), 
-
-NOTE : PCI boards are auto-detected and configured.  Do not attempt to 
-configure PCI boards with the LILO append command.  If you wish to override
-previous configuration data (As set by digiConfig), but you do not wish to
-configure any specific card (Example if there are PCI cards in the system) 
-the following override command will accomplish this:
--> append="digi=2"
-
-Samples:
-   append="digiepca=E,PC/Xe,D,16,200,D0000"
-                  or
-   append="digi=1,0,0,16,512,851968"
-
-Supporting Tools:
------------------
-Supporting tools include digiDload, digiConfig, buildPCI, and ditty.  See
-drivers/char/README.epca for more details.  Note,
-this driver REQUIRES that digiDload be executed prior to it being used. 
-Failure to do this will result in an ENODEV error.
-
-Documentation:
---------------
-Complete documentation for this product may be found in the tool package. 
-
-Sources of information and support:
------------------------------------
-Digi Intl. support site for this product:
-
-->  http://www.digi.com
-
-Acknowledgments:
-----------------
-Much of this work (And even text) was derived from a similar document 
-supporting the original public domain DigiBoard driver Copyright (C)
-1994,1995 Troy De Jongh.  Many thanks to Christoph Lameter 
-(christoph@lameter.com) and Mike McLagan (mike.mclagan@linux.org) who authored 
-and contributed to the original document. 
-
-Changelog:
-----------
-10-29-04:	Update status of driver, remove dead links in document
-		James Nelson <james4765@gmail.com>
-
-2000 (?)	Original Document