leds: Add multicolor support to BlinkM LED driver

Add multicolor support to the BlinkM driver, making it easier to control
from userspace. The BlinkM LED is a programmable RGB LED. The driver
currently supports only the regular LED sysfs class, resulting in the
creation of three distinct classes, one for red, green, and blue. The
user then has to input three values into the three seperate brightness
files within those classes. The multicolor LED framework makes the
device easier to control with the multi_intensity file: the user can
input three values at once to form a color, while still controlling the
lightness with the brightness file.

The main struct blinkm_led has changed slightly. The struct led_classdev
for the regular sysfs classes remain. The blinkm_probe function checks
CONFIG_LEDS_BLINKM_MULTICOLOR to decide whether to load the seperate
sysfs classes or the single multicolor one, but never both. The
blinkm_set_mc_brightness() function had to be added to calculate the
three color components and then set the fields of the blinkm_data
structure accordingly.

Signed-off-by: Joseph Strauss <jstrauss@mailbox.org>
Link: https://lore.kernel.org/r/20240710184844.108006-1-jstrauss@mailbox.org
Signed-off-by: Lee Jones <lee@kernel.org>

2 files changed, 34 insertions, 3 deletions

diff --git a/Documentation/leds/leds-blinkm.rst b/Documentation/leds/leds-blinkm.rst
index 2d3c226a371a..647be1c6c552 100644
--- a/Documentation/leds/leds-blinkm.rst
+++ b/Documentation/leds/leds-blinkm.rst
@@ -13,9 +13,31 @@ The device accepts RGB and HSB color values through separate commands.
 Also you can store blinking sequences as "scripts" in
 the controller and run them. Also fading is an option.
 
-The interface this driver provides is 2-fold:
+The interface this driver provides is 3-fold:
 
-a) LED class interface for use with triggers
+a) LED multicolor class interface for use with triggers
+#######################################################
+
+The registration follows the scheme::
+
+  blinkm-<i2c-bus-nr>-<i2c-device-nr>:rgb:indicator
+
+  $ ls -h /sys/class/leds/blinkm-1-9:rgb:indicator
+  brightness  device  max_brightness  multi_index  multi_intensity  power  subsystem  trigger  uevent
+
+Hue is controlled by the multi_intensity file and lightness is controlled by
+the brightness file.
+
+The order in which to write the intensity values can be found in multi_index.
+Exactly three values between 0 and 255 must be written to multi_intensity to
+change the color::
+
+  $ echo 255 100 50 > multi_intensity
+
+The overall lightness be changed by writing a value between 0 and 255 to the
+brightness file.
+
+b) LED class interface for use with triggers
 ############################################
 
 The registration follows the scheme::
@@ -79,6 +101,7 @@ E.g.::
 
 
 
-as of 6/2012
+as of 07/2024
 
 dl9pf <at> gmx <dot> de
+jstrauss <at> mailbox <dot> org
diff --git a/Documentation/leds/well-known-leds.txt b/Documentation/leds/well-known-leds.txt
index 67b44704801f..17ef78faf1f3 100644
--- a/Documentation/leds/well-known-leds.txt
+++ b/Documentation/leds/well-known-leds.txt
@@ -72,6 +72,14 @@ Good: "platform:*:charging" (allwinner sun50i, leds-cht-wcove)
 
 Good: ":backlight" (Motorola Droid 4)
 
+* Indicators
+
+Good: ":indicator" (Blinkm)
+
+* RGB
+
+Good: ":rgb" (Blinkm)
+
 * Ethernet LEDs
 
 Currently two types of Network LEDs are support, those controlled by