ALSA: doc: ReSTize emu10k1-jack.txt

Another simple conversion from a plain text file.
Put to cards directory.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 0 insertions, 74 deletions

diff --git a/Documentation/sound/alsa/emu10k1-jack.txt b/Documentation/sound/alsa/emu10k1-jack.txt
deleted file mode 100644
index 751d45036a05..000000000000
--- a/Documentation/sound/alsa/emu10k1-jack.txt
+++ /dev/null
@@ -1,74 +0,0 @@
-This document is a guide to using the emu10k1 based devices with JACK for low
-latency, multichannel recording functionality.  All of my recent work to allow
-Linux users to use the full capabilities of their hardware has been inspired 
-by the kX Project.  Without their work I never would have discovered the true
-power of this hardware.
-
-	http://www.kxproject.com
-						- Lee Revell, 2005.03.30
-
-Low latency, multichannel audio with JACK and the emu10k1/emu10k2
------------------------------------------------------------------
-
-Until recently, emu10k1 users on Linux did not have access to the same low
-latency, multichannel features offered by the "kX ASIO" feature of their
-Windows driver.  As of ALSA 1.0.9 this is no more!
-
-For those unfamiliar with kX ASIO, this consists of 16 capture and 16 playback
-channels.  With a post 2.6.9 Linux kernel, latencies down to 64 (1.33 ms) or
-even 32 (0.66ms) frames should work well.
-
-The configuration is slightly more involved than on Windows, as you have to
-select the correct device for JACK to use.  Actually, for qjackctl users it's
-fairly self explanatory - select Duplex, then for capture and playback select
-the multichannel devices, set the in and out channels to 16, and the sample
-rate to 48000Hz.  The command line looks like this:
-
-/usr/local/bin/jackd -R -dalsa -r48000 -p64 -n2 -D -Chw:0,2 -Phw:0,3 -S
-
-This will give you 16 input ports and 16 output ports.
-
-The 16 output ports map onto the 16 FX buses (or the first 16 of 64, for the
-Audigy).  The mapping from FX bus to physical output is described in
-SB-Live-mixer.txt (or Audigy-mixer.txt).
-
-The 16 input ports are connected to the 16 physical inputs.  Contrary to
-popular belief, all emu10k1 cards are multichannel cards.  Which of these
-input channels have physical inputs connected to them depends on the card
-model.  Trial and error is highly recommended; the pinout diagrams
-for the card have been reverse engineered by some enterprising kX users and are 
-available on the internet.  Meterbridge is helpful here, and the kX forums are
-packed with useful information.
-
-Each input port will either correspond to a digital (SPDIF) input, an analog
-input, or nothing.  The one exception is the SBLive! 5.1.  On these devices,
-the second and third input ports are wired to the center/LFE output.  You will
-still see 16 capture channels, but only 14 are available for recording inputs.
-
-This chart, borrowed from kxfxlib/da_asio51.cpp, describes the mapping of JACK
-ports to FXBUS2 (multitrack recording input) and EXTOUT (physical output)
-channels.
-
-/*JACK (& ASIO) mappings on 10k1 5.1 SBLive cards:
---------------------------------------------
-JACK		Epilog		FXBUS2(nr)
---------------------------------------------
-capture_1	asio14		FXBUS2(0xe)
-capture_2	asio15		FXBUS2(0xf)
-capture_3	asio0		FXBUS2(0x0)	
-~capture_4	Center		EXTOUT(0x11)	// mapped to by Center
-~capture_5	LFE		EXTOUT(0x12)	// mapped to by LFE
-capture_6	asio3		FXBUS2(0x3)
-capture_7	asio4		FXBUS2(0x4)
-capture_8	asio5		FXBUS2(0x5)
-capture_9	asio6		FXBUS2(0x6)
-capture_10	asio7		FXBUS2(0x7)
-capture_11	asio8		FXBUS2(0x8)
-capture_12	asio9		FXBUS2(0x9)
-capture_13	asio10		FXBUS2(0xa)
-capture_14	asio11		FXBUS2(0xb)
-capture_15	asio12		FXBUS2(0xc)
-capture_16	asio13		FXBUS2(0xd)
-*/
-
-TODO: describe use of ld10k1/qlo10k1 in conjunction with JACK