Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 54 insertions, 0 deletions

diff --git a/Documentation/usb/se401.txt b/Documentation/usb/se401.txt
new file mode 100644
index 000000000000..7b9d1c960a10
--- /dev/null
+++ b/Documentation/usb/se401.txt
@@ -0,0 +1,54 @@
+Linux driver for SE401 based USB cameras
+
+Copyright, 2001, Jeroen Vreeken
+
+
+INTRODUCTION:
+
+The SE401 chip is the used in low-cost usb webcams.
+It is produced by Endpoints Inc. (www.endpoints.com).
+It interfaces directly to a cmos image sensor and USB. The only other major
+part in a se401 based camera is a dram chip.
+
+The following cameras are known to work with this driver:
+
+Aox se401 (non-branded) cameras
+Philips PVCV665 USB VGA webcam 'Vesta Fun'
+Kensington VideoCAM PC Camera Model 67014
+Kensington VideoCAM PC Camera Model 67015
+Kensington VideoCAM PC Camera Model 67016
+Kensington VideoCAM PC Camera Model 67017
+
+
+WHAT YOU NEED:
+
+-	USB support
+-	VIDEO4LINUX support
+
+More information about USB support for linux can be found at:
+http://www.linux-usb.org
+
+
+MODULE OPTIONS:
+
+When the driver is compiled as a module you can also use the 'flickerless'
+option. With it exposure is limited to values that do not interfere with the
+net frequency. Valid options for this option are 0, 50 and 60. (0=disable,
+50=50hz, 60=60hz)
+
+
+KNOWN PROBLEMS:
+
+The driver works fine with the usb-ohci and uhci host controller drivers,
+the default settings also work with usb-uhci. But sending more than one bulk
+transfer at a time with usb-uhci doesn't work yet.
+Users of usb-ohci and uhci can safely enlarge SE401_NUMSBUF in se401.h in
+order to increase the throughput (and thus framerate).
+
+
+HELP:
+
+The latest info on this driver can be found at:
+http://www.chello.nl/~j.vreeken/se401/
+And questions to me can be send to:
+pe1rxq@amsat.org