Merge tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "This has been a very quiet release for the regulator API: there's one
  new driver for the Maxim MAX20411, some DT schema conversions and some
  small tweaks and improvements but really nothing major at all"

* tag 'regulator-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (22 commits)
  regulator: max597x: Align for simple_mfd_i2c driver
  regulator: max20411: Fix off-by-one for n_voltages setting
  regulator: max597x: Remove unused variable
  regulator: tps65219: use generic set_bypass()
  regulator: s5m8767: Bounds check id indexing into arrays
  regulator: max77802: Bounds check regulator id against opmode
  regulator: max20411: Convert to i2c's .probe_new()
  regulator: scmi: Allow for zero voltage domains
  regulator: max20411: Directly include bitfield.h
  regulator: Introduce Maxim MAX20411 Step-Down converter
  regulator: dt-bindings: Describe Maxim MAX20411
  regulator: dt-bindings: qcom-labibb: Allow regulator-common properties
  regulator: dt-bindings: fixed-regulator: allow gpios property
  regulator: tps65219: use IS_ERR() to detect an error pointer
  regulator: mcp16502: add enum MCP16502_REG_HPM description
  regulator: fixed-helper: use the correct function name in comment
  regulator: act8945a: fix non-kernel-doc comments
  dt-bindings: regulators: convert non-smd RPM Regulators bindings to dt-schema
  regulator: dt-bindings: Convert Fairchild FAN53555 to DT schema
  regulator: dt-bindings: qcom,usb-vbus-regulator: change node name
  ...

13 files changed, 1022 insertions, 257 deletions

diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
deleted file mode 100644
index b9f58e480349..000000000000
--- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-ACT88xx regulators
--------------------
-
-Required properties:
-- compatible: "active-semi,act8846" or "active-semi,act8865" or "active-semi,act8600"
-- reg: I2C slave address
-
-Optional properties:
-- system-power-controller: Telling whether or not this pmic is controlling
-  the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
-- active-semi,vsel-high: Indicates the VSEL pin is high.
-  If this property is missing, assume the VSEL pin is low(0).
-
-Optional input supply properties:
-- for act8600:
-  - vp1-supply: The input supply for DCDC_REG1
-  - vp2-supply: The input supply for DCDC_REG2
-  - vp3-supply: The input supply for DCDC_REG3
-  - inl-supply: The input supply for LDO_REG5, LDO_REG6, LDO_REG7 and LDO_REG8
-  SUDCDC_REG4, LDO_REG9 and LDO_REG10 do not have separate supplies.
-- for act8846:
-  - vp1-supply: The input supply for REG1
-  - vp2-supply: The input supply for REG2
-  - vp3-supply: The input supply for REG3
-  - vp4-supply: The input supply for REG4
-  - inl1-supply: The input supply for REG5, REG6 and REG7
-  - inl2-supply: The input supply for REG8 and LDO_REG9
-  - inl3-supply: The input supply for REG10, REG11 and REG12
-- for act8865:
-  - vp1-supply: The input supply for DCDC_REG1
-  - vp2-supply: The input supply for DCDC_REG2
-  - vp3-supply: The input supply for DCDC_REG3
-  - inl45-supply: The input supply for LDO_REG1 and LDO_REG2
-  - inl67-supply: The input supply for LDO_REG3 and LDO_REG4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be specified
-for act8865 using mode values from dt-bindings/regulator/active-semi,8865-regulator.h
-file.
-
-The valid names for regulators are:
-	- for act8846:
-	REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12
-	- for act8865:
-	DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4.
-	- for act8600:
-	DCDC_REG1, DCDC_REG2, DCDC_REG3, SUDCDC_REG4, LDO_REG5, LDO_REG6, LDO_REG7,
-	LDO_REG8, LDO_REG9, LDO_REG10,
-
-Example:
---------
-
-#include <dt-bindings/regulator/active-semi,8865-regulator.h>
-
-		i2c1: i2c@f0018000 {
-			pmic: act8865@5b {
-				compatible = "active-semi,act8865";
-				reg = <0x5b>;
-				active-semi,vsel-high;
-
-				regulators {
-					vcc_1v8_reg: DCDC_REG1 {
-						regulator-name = "VCC_1V8";
-						regulator-min-microvolt = <1800000>;
-						regulator-max-microvolt = <1800000>;
-						regulator-always-on;
-					};
-
-					vcc_1v2_reg: DCDC_REG2 {
-						regulator-name = "VCC_1V2";
-						regulator-min-microvolt = <1100000>;
-						regulator-max-microvolt = <1300000>;
-						regulator-always-on;
-
-						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
-									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
-
-						regulator-state-mem {
-							regulator-on-in-suspend;
-							regulator-suspend-min-microvolt = <1150000>;
-							regulator-suspend-max-microvolt = <1150000>;
-							regulator-changeable-in-suspend;
-							regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						};
-					};
-
-					vcc_3v3_reg: DCDC_REG3 {
-						regulator-name = "VCC_3V3";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-					};
-
-					vddana_reg: LDO_REG1 {
-						regulator-name = "VDDANA";
-						regulator-min-microvolt = <3300000>;
-						regulator-max-microvolt = <3300000>;
-						regulator-always-on;
-
-						regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
-									  <ACT8865_REGULATOR_MODE_LOWPOWER>;
-						regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
-
-						regulator-state-mem {
-							regulator-off-in-suspend;
-						};
-					};
-
-					vddfuse_reg: LDO_REG2 {
-						regulator-name = "FUSE_2V5";
-						regulator-min-microvolt = <2500000>;
-						regulator-max-microvolt = <2500000>;
-					};
-				};
-			};
-		};
diff --git a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt b/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
deleted file mode 100644
index 4017527619ab..000000000000
--- a/Documentation/devicetree/bindings/regulator/act8945a-regulator.txt
+++ /dev/null
@@ -1,113 +0,0 @@
-Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device
-
-Required properties:
- - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
-
-Optional properties:
-- active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high.
-  If this property is missing, assume the VSEL pin is set to logic-low.
-
-Optional input supply properties:
-  - vp1-supply: The input supply for REG_DCDC1
-  - vp2-supply: The input supply for REG_DCDC2
-  - vp3-supply: The input supply for REG_DCDC3
-  - inl45-supply: The input supply for REG_LDO1 and REG_LDO2
-  - inl67-supply: The input supply for REG_LDO3 and REG_LDO4
-
-Any standard regulator properties can be used to configure the single regulator.
-regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
-specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h
-file.
-
-The valid names for regulators are:
-	REG_DCDC1, REG_DCDC2, REG_DCDC3, REG_LDO1, REG_LDO2, REG_LDO3, REG_LDO4.
-
-Example:
-
-#include <dt-bindings/regulator/active-semi,8945a-regulator.h>
-
-	pmic@5b {
-		compatible = "active-semi,act8945a";
-		reg = <0x5b>;
-
-		active-semi,vsel-high;
-
-		regulators {
-			vdd_1v35_reg: REG_DCDC1 {
-				regulator-name = "VDD_1V35";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
-				regulator-state-mem {
-					regulator-on-in-suspend;
-					regulator-suspend-min-microvolt=<1400000>;
-					regulator-suspend-max-microvolt=<1400000>;
-					regulator-changeable-in-suspend;
-					regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				};
-			};
-
-			vdd_1v2_reg: REG_DCDC2 {
-				regulator-name = "VDD_1V2";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1300000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_3v3_reg: REG_DCDC3 {
-				regulator-name = "VDD_3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_fuse_reg: REG_LDO1 {
-				regulator-name = "VDD_FUSE";
-				regulator-min-microvolt = <2500000>;
-				regulator-max-microvolt = <2500000>;
-				regulator-always-on;
-
-				regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
-							  <ACT8945A_REGULATOR_MODE_LOWPOWER>;
-				regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
-
-				regulator-state-mem {
-					regulator-off-in-suspend;
-				};
-			};
-
-			vdd_3v3_lp_reg: REG_LDO2 {
-				regulator-name = "VDD_3V3_LP";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_led_reg: REG_LDO3 {
-				regulator-name = "VDD_LED";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			vdd_sdhc_1v8_reg: REG_LDO4 {
-				regulator-name = "VDD_SDHC_1V8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
new file mode 100644
index 000000000000..b8ca967bc83d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8600.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8600.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8600 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8600
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8600 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^(SUDCDC_REG4|LDO_REG9|LDO_REG10)$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+      "^LDO[5-8]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl-supply:
+            description: Handle to the INL input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8600";
+        reg = <0x5a>;
+
+        regulators {
+          SUDCDC_REG4 {
+            regulator-min-microvolt = <5300000>;
+            regulator-max-microvolt = <5300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO5 {
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO6 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO7 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            inl-supply = <&vcc>;
+          };
+
+          LDO8 {
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG9 {
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+            inl-supply = <&vcc>;
+          };
+
+          LDO_REG10 {
+            inl-supply = <&vcc>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
new file mode 100644
index 000000000000..3725348bb235
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8846.yaml
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8846.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8846 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8846
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8846 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      REG1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      REG2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      REG3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+      REG4:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp4-supply:
+            description: Handle to the VP4 input supply
+
+    patternProperties:
+      "^REG[5-7]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl1-supply:
+            description: Handle to the INL1 input supply
+
+      "^REG[8-9]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl2-supply:
+            description: Handle to the INL2 input supply
+
+      "^REG1[0-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl3-supply:
+            description: Handle to the INL3 input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5a {
+        compatible = "active-semi,act8846";
+        reg = <0x5a>;
+
+        system-power-controller;
+
+        regulators {
+          REG1 {
+            regulator-name = "VCC_DDR";
+            regulator-min-microvolt = <1200000>;
+            regulator-max-microvolt = <1200000>;
+            regulator-always-on;
+          };
+
+          REG2 {
+            regulator-name = "VCC_IO";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG3 {
+            regulator-name = "VDD_LOG";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG4 {
+            regulator-name = "VCC_20";
+            regulator-min-microvolt = <2000000>;
+            regulator-max-microvolt = <2000000>;
+            regulator-always-on;
+          };
+
+          REG5 {
+            regulator-name = "VCCIO_SD";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG6 {
+            regulator-name = "VDD10_LCD";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG7 {
+            regulator-name = "VCC_WL";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG8 {
+            regulator-name = "VCCA_33";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG9 {
+            regulator-name = "VCC_LAN";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          REG10 {
+            regulator-name = "VDD_10";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1000000>;
+            regulator-always-on;
+          };
+
+          REG11 {
+            regulator-name = "VCC_18";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          REG12 {
+            regulator-name = "VCC18_LCD";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
new file mode 100644
index 000000000000..e8bf09faafb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8865.yaml
@@ -0,0 +1,158 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8865.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8865 regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8865
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8865 is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      DCDC_REG1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      DCDC_REG2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      DCDC_REG3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^LDO_REG[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^LDO_REG[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+    i2c1 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8865";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          DCDC_REG1 {
+            regulator-name = "VCC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-always-on;
+          };
+
+          DCDC_REG2 {
+            regulator-name = "VCC_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_FIXED>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_FIXED>;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1150000>;
+              regulator-suspend-max-microvolt = <1150000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          DCDC_REG3 {
+            regulator-name = "VCC_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+          };
+
+          LDO_REG1 {
+            regulator-name = "VDDANA";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-always-on;
+
+            regulator-allowed-modes = <ACT8865_REGULATOR_MODE_NORMAL>,
+                                      <ACT8865_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8865_REGULATOR_MODE_NORMAL>;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          LDO_REG2 {
+            regulator-name = "FUSE_2V5";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+          };
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
new file mode 100644
index 000000000000..bdf3f7d34ef5
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/active-semi,act8945a.yaml
@@ -0,0 +1,258 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/active-semi,act8945a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Active-semi ACT8945a regulator
+
+maintainers:
+  - Paul Cercueil <paul@crapouillou.net>
+
+properties:
+  compatible:
+    const: active-semi,act8945a
+
+  reg:
+    maxItems: 1
+
+  system-power-controller:
+    description:
+      Indicates that the ACT8945a is responsible for powering OFF
+      the system.
+    type: boolean
+
+  active-semi,vsel-high:
+    description:
+      Indicates the VSEL pin is high. If this property is missing,
+      the VSEL pin is assumed to be low.
+    type: boolean
+
+  regulators:
+    type: object
+    additionalProperties: false
+
+    properties:
+      REG_DCDC1:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp1-supply:
+            description: Handle to the VP1 input supply
+
+      REG_DCDC2:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp2-supply:
+            description: Handle to the VP2 input supply
+
+      REG_DCDC3:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          vp3-supply:
+            description: Handle to the VP3 input supply
+
+    patternProperties:
+      "^REG_LDO[1-2]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl45-supply:
+            description: Handle to the INL45 input supply
+
+      "^REG_LDO[3-4]$":
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          inl67-supply:
+            description: Handle to the INL67 input supply
+
+  charger:
+    type: object
+    additionalProperties: false
+
+    properties:
+      compatible:
+        const: active-semi,act8945a-charger
+
+      interrupts:
+        maxItems: 1
+
+      active-semi,chglev-gpios:
+        description: CGHLEV GPIO
+        maxItems: 1
+
+      active-semi,lbo-gpios:
+        description: LBO GPIO
+        maxItems: 1
+
+      active-semi,input-voltage-threshold-microvolt:
+        description: Input voltage threshold
+        maxItems: 1
+
+      active-semi,precondition-timeout:
+        description: Precondition timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      active-semi,total-timeout:
+        description: Total timeout
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+    required:
+      - compatible
+      - interrupts
+
+additionalProperties: false
+
+required:
+  - reg
+  - compatible
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mfd/atmel-flexcom.h>
+    #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@5b {
+        compatible = "active-semi,act8945a";
+        reg = <0x5b>;
+        active-semi,vsel-high;
+
+        regulators {
+          REG_DCDC1 {
+            regulator-name = "VDD_1V35";
+            regulator-min-microvolt = <1350000>;
+            regulator-max-microvolt = <1350000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-on-in-suspend;
+              regulator-suspend-min-microvolt = <1400000>;
+              regulator-suspend-max-microvolt = <1400000>;
+              regulator-changeable-in-suspend;
+              regulator-mode = <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            };
+          };
+
+          REG_DCDC2 {
+            regulator-name = "VDD_1V2";
+            regulator-min-microvolt = <1100000>;
+            regulator-max-microvolt = <1300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_DCDC3 {
+            regulator-name = "VDD_3V3";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO1 {
+            regulator-name = "VDD_FUSE";
+            regulator-min-microvolt = <2500000>;
+            regulator-max-microvolt = <2500000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO2 {
+            regulator-name = "VDD_3V3_LP";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO3 {
+            regulator-name = "VDD_LED";
+            regulator-min-microvolt = <3300000>;
+            regulator-max-microvolt = <3300000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+
+          REG_LDO4 {
+            regulator-name = "VDD_SDHC_1V8";
+            regulator-min-microvolt = <1800000>;
+            regulator-max-microvolt = <1800000>;
+            regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
+                                      <ACT8945A_REGULATOR_MODE_LOWPOWER>;
+            regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
+            regulator-always-on;
+
+            regulator-state-mem {
+              regulator-off-in-suspend;
+            };
+          };
+        };
+
+        charger {
+          compatible = "active-semi,act8945a-charger";
+          pinctrl-names = "default";
+          pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+          interrupt-parent = <&pioA>;
+          interrupts = <45 IRQ_TYPE_EDGE_RISING>;
+
+          active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
+          active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
+          active-semi,input-voltage-threshold-microvolt = <6600>;
+          active-semi,precondition-timeout = <40>;
+          active-semi,total-timeout = <3>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/fan53555.txt b/Documentation/devicetree/bindings/regulator/fan53555.txt
deleted file mode 100644
index 013f096ac0aa..000000000000
--- a/Documentation/devicetree/bindings/regulator/fan53555.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-Binding for Fairchild FAN53555 regulators
-
-Required properties:
-  - compatible: one of "fcs,fan53555", "fcs,fan53526", "silergy,syr827",
-		"silergy,syr828" or "tcs,tcs4525".
-  - reg: I2C address
-
-Optional properties:
-  - fcs,suspend-voltage-selector: declare which of the two available
-		voltage selector registers should be used for the suspend
-		voltage. The other one is used for the runtime voltage setting
-		Possible values are either <0> or <1>
-  - vin-supply: regulator supplying the vin pin
-
-Example:
-
-	regulator@40 {
-		compatible = "fcs,fan53555";
-		regulator-name = "fan53555";
-		regulator-min-microvolt = <1000000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&parent_reg>;
-		fcs,suspend-voltage-selector = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
new file mode 100644
index 000000000000..c0dbba843f70
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/fcs,fan53555.yaml
@@ -0,0 +1,64 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/fcs,fan53555.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Fairchild FAN53555 regulators
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - fcs,fan53555
+      - fcs,fan53526
+      - silergy,syr827
+      - silergy,syr828
+      - tcs,tcs4525
+
+  reg:
+    maxItems: 1
+
+  fcs,suspend-voltage-selector:
+    description: Declares which of the two available voltage selector
+      registers should be used for the suspend voltage. The other one is used
+      for the runtime voltage setting.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [ 0, 1 ]
+
+  vin-supply:
+    description: Supply for the vin pin
+
+  vsel-gpios:
+    description: Voltage Select. When this pin is LOW, VOUT is set by the
+      VSEL0 register. When this pin is HIGH, VOUT is set by the VSEL1 register.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@40 {
+            compatible = "fcs,fan53555";
+            reg = <0x40>;
+            regulator-name = "fan53555";
+            regulator-min-microvolt = <1000000>;
+            regulator-max-microvolt = <1800000>;
+            vin-supply = <&parent_reg>;
+            fcs,suspend-voltage-selector = <1>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
index 84eeaef179a5..48af7cba4652 100644
--- a/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
@@ -35,6 +35,10 @@ allOf:
       required:
         - power-domains
         - required-opps
+  - not:
+      required:
+        - gpio
+        - gpios
 
 properties:
   compatible:
@@ -49,6 +53,9 @@ properties:
     description: gpio to use for enable control
     maxItems: 1
 
+  gpios:
+    maxItems: 1
+
   clocks:
     description:
       clock to use for enable control. This binding is only available if
diff --git a/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml
new file mode 100644
index 000000000000..5b3a42d24e51
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/maxim,max20411.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/maxim,max20411.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim Integrated MAX20411 Step-Down DC-DC Converter
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+description:
+  The MAX20411 is a high-efficiency, DC-DC step-down converter. It provides
+  configurable output voltage in the range of 0.5V to 1.275V, configurable over
+  I2C.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    const: maxim,max20411
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    description: GPIO connected to the EN pin, active high
+
+  vdd-supply:
+    description: Input supply for the device (VDD pin, 3.0V to 5.5V)
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@39 {
+            compatible = "maxim,max20411";
+            reg = <0x39>;
+
+            enable-gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
+
+            regulator-min-microvolt = <800000>;
+            regulator-max-microvolt = <1000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
new file mode 100644
index 000000000000..8a08698e3484
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpm-regulator.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,rpm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm RPM regulator
+
+description:
+  The Qualcomm RPM regulator is modelled as a subdevice of the RPM.
+
+  Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml
+  for information regarding the RPM node.
+
+  The regulator node houses sub-nodes for each regulator within the device.
+  Each sub-node is identified using the node's name, with valid values listed
+  for each of the pmics below.
+
+  For pm8058 l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
+  l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
+  lvs0, lvs1, ncp
+
+  For pm8901 l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
+  mvs
+
+  For pm8921 s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
+  l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
+  ncp
+
+  For pm8018 s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+  l12, l14, lvs1
+
+  For smb208 s1a, s1b, s2a, s2b
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - qcom,rpm-pm8058-regulators
+      - qcom,rpm-pm8901-regulators
+      - qcom,rpm-pm8921-regulators
+      - qcom,rpm-pm8018-regulators
+      - qcom,rpm-smb208-regulators
+
+patternProperties:
+  ".*-supply$":
+    description: Input supply phandle(s) for this node
+
+  "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$":
+    description: List of regulators and its properties
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
+    properties:
+      bias-pull-down:
+        description: enable pull down of the regulator when inactive
+        type: boolean
+
+      qcom,switch-mode-frequency:
+        description: Frequency (Hz) of the switch-mode power supply
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 19200000
+          - 9600000
+          - 6400000
+          - 4800000
+          - 3840000
+          - 3200000
+          - 2740000
+          - 2400000
+          - 2130000
+          - 1920000
+          - 1750000
+          - 1600000
+          - 1480000
+          - 1370000
+          - 1280000
+          - 1200000
+
+      qcom,force-mode:
+        description: Indicates that the regulator should be forced to a particular mode
+        $ref: /schemas/types.yaml#/definitions/uint32
+        enum:
+          - 0 # QCOM_RPM_FORCE_MODE_NONE do not force any mode
+          - 1 # QCOM_RPM_FORCE_MODE_LPM force into low power mode
+          - 2 # QCOM_RPM_FORCE_MODE_HPM force into high power mode
+          - 3 # QCOM_RPM_FORCE_MODE_AUTO allow regulator to automatically select its own mode
+              # based on realtime current draw, only for pm8921 smps and ftsmps
+
+      qcom,power-mode-hysteretic:
+        description: select that the power supply should operate in hysteretic mode,
+          instead of the default pwm mode
+        type: boolean
+
+additionalProperties: false
+
+required:
+  - compatible
+
+examples:
+  - |
+    #include <dt-bindings/mfd/qcom-rpm.h>
+    regulators {
+      compatible = "qcom,rpm-pm8921-regulators";
+      vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+      s1 {
+        regulator-min-microvolt = <1225000>;
+        regulator-max-microvolt = <1225000>;
+
+        bias-pull-down;
+
+        qcom,switch-mode-frequency = <3200000>;
+      };
+
+      pm8921_s4: s4 {
+        regulator-min-microvolt = <1800000>;
+        regulator-max-microvolt = <1800000>;
+
+        qcom,switch-mode-frequency = <1600000>;
+        bias-pull-down;
+
+        qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
index dbe78cd4adba..b1cff3adb21b 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,usb-vbus-regulator.yaml
@@ -33,7 +33,7 @@ examples:
      pm8150b {
         #address-cells = <1>;
         #size-cells = <0>;
-        pm8150b_vbus: dcdc@1100 {
+        pm8150b_vbus: usb-vbus-regulator@1100 {
             compatible = "qcom,pm8150b-vbus-reg";
             reg = <0x1100>;
         };
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index f97b8083678f..e987c39b223e 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -20,7 +20,8 @@ properties:
 
   lab:
     type: object
-    additionalProperties: false
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
 
     properties:
       qcom,soft-start-us:
@@ -46,7 +47,8 @@ properties:
 
   ibb:
     type: object
-    additionalProperties: false
+    $ref: regulator.yaml#
+    unevaluatedProperties: false
 
     properties:
       qcom,discharge-resistor-kohms: