Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "One of the largest releases for KVM...  Hardly any generic
  changes, but lots of architecture-specific updates.

  ARM:
   - VHE support so that we can run the kernel at EL2 on ARMv8.1 systems
   - PMU support for guests
   - 32bit world switch rewritten in C
   - various optimizations to the vgic save/restore code.

  PPC:
   - enabled KVM-VFIO integration ("VFIO device")
   - optimizations to speed up IPIs between vcpus
   - in-kernel handling of IOMMU hypercalls
   - support for dynamic DMA windows (DDW).

  s390:
   - provide the floating point registers via sync regs;
   - separated instruction vs.  data accesses
   - dirty log improvements for huge guests
   - bugfixes and documentation improvements.

  x86:
   - Hyper-V VMBus hypercall userspace exit
   - alternative implementation of lowest-priority interrupts using
     vector hashing (for better VT-d posted interrupt support)
   - fixed guest debugging with nested virtualizations
   - improved interrupt tracking in the in-kernel IOAPIC
   - generic infrastructure for tracking writes to guest
     memory - currently its only use is to speedup the legacy shadow
     paging (pre-EPT) case, but in the future it will be used for
     virtual GPUs as well
   - much cleanup (LAPIC, kvmclock, MMU, PIT), including ubsan fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (217 commits)
  KVM: x86: remove eager_fpu field of struct kvm_vcpu_arch
  KVM: x86: disable MPX if host did not enable MPX XSAVE features
  arm64: KVM: vgic-v3: Only wipe LRs on vcpu exit
  arm64: KVM: vgic-v3: Reset LRs at boot time
  arm64: KVM: vgic-v3: Do not save an LR known to be empty
  arm64: KVM: vgic-v3: Save maintenance interrupt state only if required
  arm64: KVM: vgic-v3: Avoid accessing ICH registers
  KVM: arm/arm64: vgic-v2: Make GICD_SGIR quicker to hit
  KVM: arm/arm64: vgic-v2: Only wipe LRs on vcpu exit
  KVM: arm/arm64: vgic-v2: Reset LRs at boot time
  KVM: arm/arm64: vgic-v2: Do not save an LR known to be empty
  KVM: arm/arm64: vgic-v2: Move GICH_ELRSR saving to its own function
  KVM: arm/arm64: vgic-v2: Save maintenance interrupt state only if required
  KVM: arm/arm64: vgic-v2: Avoid accessing GICH registers
  KVM: s390: allocate only one DMA page per VM
  KVM: s390: enable STFLE interpretation only if enabled for the guest
  KVM: s390: wake up when the VCPU cpu timer expires
  KVM: s390: step the VCPU timer while in enabled wait
  KVM: s390: protect VCPU cpu timer with a seqcount
  KVM: s390: step VCPU cpu timer during kvm_run ioctl
  ...

5 files changed, 185 insertions, 7 deletions

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 07e4cdf02407..4d0542c5206b 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -2507,8 +2507,9 @@ struct kvm_create_device {
 
 4.80 KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR
 
-Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
-Type: device ioctl, vm ioctl
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device,
+  KVM_CAP_VCPU_ATTRIBUTES for vcpu device
+Type: device ioctl, vm ioctl, vcpu ioctl
 Parameters: struct kvm_device_attr
 Returns: 0 on success, -1 on error
 Errors:
@@ -2533,8 +2534,9 @@ struct kvm_device_attr {
 
 4.81 KVM_HAS_DEVICE_ATTR
 
-Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device
-Type: device ioctl, vm ioctl
+Capability: KVM_CAP_DEVICE_CTRL, KVM_CAP_VM_ATTRIBUTES for vm device,
+  KVM_CAP_VCPU_ATTRIBUTES for vcpu device
+Type: device ioctl, vm ioctl, vcpu ioctl
 Parameters: struct kvm_device_attr
 Returns: 0 on success, -1 on error
 Errors:
@@ -2577,6 +2579,8 @@ Possible features:
 	  Depends on KVM_CAP_ARM_EL1_32BIT (arm64 only).
 	- KVM_ARM_VCPU_PSCI_0_2: Emulate PSCI v0.2 for the CPU.
 	  Depends on KVM_CAP_ARM_PSCI_0_2.
+	- KVM_ARM_VCPU_PMU_V3: Emulate PMUv3 for the CPU.
+	  Depends on KVM_CAP_ARM_PMU_V3.
 
 
 4.83 KVM_ARM_PREFERRED_TARGET
@@ -3035,6 +3039,87 @@ Returns: 0 on success, -1 on error
 
 Queues an SMI on the thread's vcpu.
 
+4.97 KVM_CAP_PPC_MULTITCE
+
+Capability: KVM_CAP_PPC_MULTITCE
+Architectures: ppc
+Type: vm
+
+This capability means the kernel is capable of handling hypercalls
+H_PUT_TCE_INDIRECT and H_STUFF_TCE without passing those into the user
+space. This significantly accelerates DMA operations for PPC KVM guests.
+User space should expect that its handlers for these hypercalls
+are not going to be called if user space previously registered LIOBN
+in KVM (via KVM_CREATE_SPAPR_TCE or similar calls).
+
+In order to enable H_PUT_TCE_INDIRECT and H_STUFF_TCE use in the guest,
+user space might have to advertise it for the guest. For example,
+IBM pSeries (sPAPR) guest starts using them if "hcall-multi-tce" is
+present in the "ibm,hypertas-functions" device-tree property.
+
+The hypercalls mentioned above may or may not be processed successfully
+in the kernel based fast path. If they can not be handled by the kernel,
+they will get passed on to user space. So user space still has to have
+an implementation for these despite the in kernel acceleration.
+
+This capability is always enabled.
+
+4.98 KVM_CREATE_SPAPR_TCE_64
+
+Capability: KVM_CAP_SPAPR_TCE_64
+Architectures: powerpc
+Type: vm ioctl
+Parameters: struct kvm_create_spapr_tce_64 (in)
+Returns: file descriptor for manipulating the created TCE table
+
+This is an extension for KVM_CAP_SPAPR_TCE which only supports 32bit
+windows, described in 4.62 KVM_CREATE_SPAPR_TCE
+
+This capability uses extended struct in ioctl interface:
+
+/* for KVM_CAP_SPAPR_TCE_64 */
+struct kvm_create_spapr_tce_64 {
+	__u64 liobn;
+	__u32 page_shift;
+	__u32 flags;
+	__u64 offset;	/* in pages */
+	__u64 size; 	/* in pages */
+};
+
+The aim of extension is to support an additional bigger DMA window with
+a variable page size.
+KVM_CREATE_SPAPR_TCE_64 receives a 64bit window size, an IOMMU page shift and
+a bus offset of the corresponding DMA window, @size and @offset are numbers
+of IOMMU pages.
+
+@flags are not used at the moment.
+
+The rest of functionality is identical to KVM_CREATE_SPAPR_TCE.
+
+4.98 KVM_REINJECT_CONTROL
+
+Capability: KVM_CAP_REINJECT_CONTROL
+Architectures: x86
+Type: vm ioctl
+Parameters: struct kvm_reinject_control (in)
+Returns: 0 on success,
+         -EFAULT if struct kvm_reinject_control cannot be read,
+         -ENXIO if KVM_CREATE_PIT or KVM_CREATE_PIT2 didn't succeed earlier.
+
+i8254 (PIT) has two modes, reinject and !reinject.  The default is reinject,
+where KVM queues elapsed i8254 ticks and monitors completion of interrupt from
+vector(s) that i8254 injects.  Reinject mode dequeues a tick and injects its
+interrupt whenever there isn't a pending interrupt from i8254.
+!reinject mode injects an interrupt as soon as a tick arrives.
+
+struct kvm_reinject_control {
+	__u8 pit_reinject;
+	__u8 reserved[31];
+};
+
+pit_reinject = 0 (!reinject mode) is recommended, unless running an old
+operating system that uses the PIT for timing (e.g. Linux 2.4.x).
+
 5. The kvm_run structure
 ------------------------
 
@@ -3339,6 +3424,7 @@ EOI was received.
 
 		struct kvm_hyperv_exit {
 #define KVM_EXIT_HYPERV_SYNIC          1
+#define KVM_EXIT_HYPERV_HCALL          2
 			__u32 type;
 			union {
 				struct {
@@ -3347,6 +3433,11 @@ EOI was received.
 					__u64 evt_page;
 					__u64 msg_page;
 				} synic;
+				struct {
+					__u64 input;
+					__u64 result;
+					__u64 params[2];
+				} hcall;
 			} u;
 		};
 		/* KVM_EXIT_HYPERV */
diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virtual/kvm/devices/s390_flic.txt
index d1ad9d5cae46..e3e314cb83e8 100644
--- a/Documentation/virtual/kvm/devices/s390_flic.txt
+++ b/Documentation/virtual/kvm/devices/s390_flic.txt
@@ -88,6 +88,8 @@ struct kvm_s390_io_adapter_req {
       perform a gmap translation for the guest address provided in addr,
       pin a userspace page for the translated address and add it to the
       list of mappings
+      Note: A new mapping will be created unconditionally; therefore,
+            the calling code should avoid making duplicate mappings.
 
     KVM_S390_IO_ADAPTER_UNMAP
       release a userspace page for the translated address specified in addr
diff --git a/Documentation/virtual/kvm/devices/vcpu.txt b/Documentation/virtual/kvm/devices/vcpu.txt
new file mode 100644
index 000000000000..c04165868faf
--- /dev/null
+++ b/Documentation/virtual/kvm/devices/vcpu.txt
@@ -0,0 +1,33 @@
+Generic vcpu interface
+====================================
+
+The virtual cpu "device" also accepts the ioctls KVM_SET_DEVICE_ATTR,
+KVM_GET_DEVICE_ATTR, and KVM_HAS_DEVICE_ATTR. The interface uses the same struct
+kvm_device_attr as other devices, but targets VCPU-wide settings and controls.
+
+The groups and attributes per virtual cpu, if any, are architecture specific.
+
+1. GROUP: KVM_ARM_VCPU_PMU_V3_CTRL
+Architectures: ARM64
+
+1.1. ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_IRQ
+Parameters: in kvm_device_attr.addr the address for PMU overflow interrupt is a
+            pointer to an int
+Returns: -EBUSY: The PMU overflow interrupt is already set
+         -ENXIO: The overflow interrupt not set when attempting to get it
+         -ENODEV: PMUv3 not supported
+         -EINVAL: Invalid PMU overflow interrupt number supplied
+
+A value describing the PMUv3 (Performance Monitor Unit v3) overflow interrupt
+number for this vcpu. This interrupt could be a PPI or SPI, but the interrupt
+type must be same for each vcpu. As a PPI, the interrupt number is the same for
+all vcpus, while as an SPI it must be a separate number per vcpu.
+
+1.2 ATTRIBUTE: KVM_ARM_VCPU_PMU_V3_INIT
+Parameters: no additional parameter in kvm_device_attr.addr
+Returns: -ENODEV: PMUv3 not supported
+         -ENXIO: PMUv3 not properly configured as required prior to calling this
+                 attribute
+         -EBUSY: PMUv3 already initialized
+
+Request the initialization of the PMUv3.
diff --git a/Documentation/virtual/kvm/devices/vm.txt b/Documentation/virtual/kvm/devices/vm.txt
index f083a168eb35..a9ea8774a45f 100644
--- a/Documentation/virtual/kvm/devices/vm.txt
+++ b/Documentation/virtual/kvm/devices/vm.txt
@@ -84,3 +84,55 @@ Returns:    -EBUSY in case 1 or more vcpus are already activated (only in write
 	    -EFAULT if the given address is not accessible from kernel space
 	    -ENOMEM if not enough memory is available to process the ioctl
 	    0 in case of success
+
+3. GROUP: KVM_S390_VM_TOD
+Architectures: s390
+
+3.1. ATTRIBUTE: KVM_S390_VM_TOD_HIGH
+
+Allows user space to set/get the TOD clock extension (u8).
+
+Parameters: address of a buffer in user space to store the data (u8) to
+Returns:    -EFAULT if the given address is not accessible from kernel space
+	    -EINVAL if setting the TOD clock extension to != 0 is not supported
+
+3.2. ATTRIBUTE: KVM_S390_VM_TOD_LOW
+
+Allows user space to set/get bits 0-63 of the TOD clock register as defined in
+the POP (u64).
+
+Parameters: address of a buffer in user space to store the data (u64) to
+Returns:    -EFAULT if the given address is not accessible from kernel space
+
+4. GROUP: KVM_S390_VM_CRYPTO
+Architectures: s390
+
+4.1. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_AES_KW (w/o)
+
+Allows user space to enable aes key wrapping, including generating a new
+wrapping key.
+
+Parameters: none
+Returns:    0
+
+4.2. ATTRIBUTE: KVM_S390_VM_CRYPTO_ENABLE_DEA_KW (w/o)
+
+Allows user space to enable dea key wrapping, including generating a new
+wrapping key.
+
+Parameters: none
+Returns:    0
+
+4.3. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_AES_KW (w/o)
+
+Allows user space to disable aes key wrapping, clearing the wrapping key.
+
+Parameters: none
+Returns:    0
+
+4.4. ATTRIBUTE: KVM_S390_VM_CRYPTO_DISABLE_DEA_KW (w/o)
+
+Allows user space to disable dea key wrapping, clearing the wrapping key.
+
+Parameters: none
+Returns:    0
diff --git a/Documentation/virtual/kvm/mmu.txt b/Documentation/virtual/kvm/mmu.txt
index c81731096a43..481b6a9c25d5 100644
--- a/Documentation/virtual/kvm/mmu.txt
+++ b/Documentation/virtual/kvm/mmu.txt
@@ -392,11 +392,11 @@ To instantiate a large spte, four constraints must be satisfied:
   write-protected pages
 - the guest page must be wholly contained by a single memory slot
 
-To check the last two conditions, the mmu maintains a ->write_count set of
+To check the last two conditions, the mmu maintains a ->disallow_lpage set of
 arrays for each memory slot and large page size.  Every write protected page
-causes its write_count to be incremented, thus preventing instantiation of
+causes its disallow_lpage to be incremented, thus preventing instantiation of
 a large spte.  The frames at the end of an unaligned memory slot have
-artificially inflated ->write_counts so they can never be instantiated.
+artificially inflated ->disallow_lpages so they can never be instantiated.
 
 Zapping all pages (page generation count)
 =========================================