aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds2014-05-13 11:07:02 +0900
committerLinus Torvalds2014-05-13 11:07:02 +0900
commit200d963bf49c3399a5f044d53b5b4a8f133a776c (patch)
treec8ff3f50f3f4494f7a113baa3bf2686ecf999ec7 /Documentation
parent7e338c9991ecee9c2ac7a4cee2c2e11ecb563d02 (diff)
parent3b27dcec920075b6f1f5f8014e32e764fcbb96f8 (diff)
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson: "Seems like we've had more fixes than usual this release cycle, but there's nothing in particular that we're doing differently. Perhaps it's just one of those cycles where more people are finding more regressions (and/or that the latency of when people actually test what's been in the tree for a while is catching up so that we get the bug reports now). The bigger changes here are are for TI and Marvell platforms: * Timing changes for GPMC (generic localbus) on OMAP causing some largeish DTS deltas. * Fixes to window allocation on PCI for mvebu touching drivers/ stuff. Patches have acks from subsystem maintainers where needed. * A fix from Thomas for a botched DT conversion in drivers/edma. There's a handful of other fixes for the above platforms as well as sunxi, at91, i.MX. I also included a MAINTAINER update for Broadcom, and a trivial move of a binding doc. I know you said you'd be offline this week, but I might as well post it for when you return. :)" I'm not quite offline yet. Doing a few pulls in the last hour before my internet goes away.. * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) MAINTAINERS: update Broadcom ARM tree location and add an SoC family ARM: dts: i.MX53: Fix ipu register space size ARM: dts: kirkwood: fix mislocated pcie-controller nodes ARM: sunxi: Enable GMAC in sunxi_defconfig ARM: common: edma: Fix xbar mapping ARM: sun7i: Fix i2c4 base address ARM: Kirkwood: T5325: Fix double probe of Codec ARM: mvebu: enable the SATA interface on Armada 375 DB ARM: mvebu: specify I2C bus frequency on Armada 370 DB ARM: mvebu: use qsgmii phy-mode for Armada XP GP interfaces ARM: mvebu: fix NOR bus-width in Armada XP OpenBlocks AX3 Device Tree ARM: mvebu: fix NOR bus-width in Armada XP DB Device Tree ARM: mvebu: fix NOR bus-width in Armada XP GP Device Tree ARM: dts: AM3517: Disable absent IPs inherited from OMAP3 ARM: dts: OMAP2: Fix interrupts for OMAP2420 mailbox ARM: dts: OMAP5: Add mailbox dt node to fix boot warning ARM: OMAP5: Switch to THUMB mode if needed on secondary CPU ARM: dts: am437x-gp-evm: Do not reset gpio5 ARM: dts: omap3-igep0020: use SMSC9221 timings PCI: mvebu: split PCIe BARs into multiple MBus windows when needed ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/clock/at91-clock.txt2
-rw-r--r--Documentation/devicetree/bindings/dma/ti-edma.txt4
2 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/clock/at91-clock.txt b/Documentation/devicetree/bindings/clock/at91-clock.txt
index cd5e23912888..6794cdc96d8f 100644
--- a/Documentation/devicetree/bindings/clock/at91-clock.txt
+++ b/Documentation/devicetree/bindings/clock/at91-clock.txt
@@ -62,7 +62,7 @@ Required properties for PMC node:
- interrupt-controller : tell that the PMC is an interrupt controller.
- #interrupt-cells : must be set to 1. The first cell encodes the interrupt id,
and reflect the bit position in the PMC_ER/DR/SR registers.
- You can use the dt macros defined in dt-bindings/clk/at91.h.
+ You can use the dt macros defined in dt-bindings/clock/at91.h.
0 (AT91_PMC_MOSCS) -> main oscillator ready
1 (AT91_PMC_LOCKA) -> PLL A ready
2 (AT91_PMC_LOCKB) -> PLL B ready
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 9fbbdb783a72..68ff2137bae7 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -29,6 +29,6 @@ edma: edma@49000000 {
dma-channels = <64>;
ti,edma-regions = <4>;
ti,edma-slots = <256>;
- ti,edma-xbar-event-map = <1 12
- 2 13>;
+ ti,edma-xbar-event-map = /bits/ 16 <1 12
+ 2 13>;
};