Merge branch 'linus' into x86/entry, to resolve conflicts

Conflicts:
	arch/x86/kernel/traps.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

12 files changed, 104 insertions, 42 deletions

diff --git a/Documentation/ABI/testing/dev-kmsg b/Documentation/ABI/testing/dev-kmsg
index 1e6c28b1942b..f307506eb54c 100644
--- a/Documentation/ABI/testing/dev-kmsg
+++ b/Documentation/ABI/testing/dev-kmsg
@@ -56,11 +56,6 @@ Description:	The /dev/kmsg character device node provides userspace access
 		  seek after the last record available at the time
 		  the last SYSLOG_ACTION_CLEAR was issued.
 
-		Due to the record nature of this interface with a "read all"
-		behavior and the specific positions each seek operation sets,
-		SEEK_CUR is not supported, returning -ESPIPE (invalid seek) to
-		errno whenever requested.
-
 		The output format consists of a prefix carrying the syslog
 		prefix including priority and facility, the 64 bit message
 		sequence number and the monotonic timestamp in microseconds,
diff --git a/Documentation/ABI/testing/sysfs-bus-papr-pmem b/Documentation/ABI/testing/sysfs-bus-papr-pmem
new file mode 100644
index 000000000000..5b10d036a8d4
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-papr-pmem
@@ -0,0 +1,27 @@
+What:		/sys/bus/nd/devices/nmemX/papr/flags
+Date:		Apr, 2020
+KernelVersion:	v5.8
+Contact:	linuxppc-dev <linuxppc-dev@lists.ozlabs.org>, linux-nvdimm@lists.01.org,
+Description:
+		(RO) Report flags indicating various states of a
+		papr-pmem NVDIMM device. Each flag maps to a one or
+		more bits set in the dimm-health-bitmap retrieved in
+		response to H_SCM_HEALTH hcall. The details of the bit
+		flags returned in response to this hcall is available
+		at 'Documentation/powerpc/papr_hcalls.rst' . Below are
+		the flags reported in this sysfs file:
+
+		* "not_armed"	: Indicates that NVDIMM contents will not
+				  survive a power cycle.
+		* "flush_fail"	: Indicates that NVDIMM contents
+				  couldn't be flushed during last
+				  shut-down event.
+		* "restore_fail": Indicates that NVDIMM contents
+				  couldn't be restored during NVDIMM
+				  initialization.
+		* "encrypted"	: NVDIMM contents are encrypted.
+		* "smart_notify": There is health event for the NVDIMM.
+		* "scrubbed"	: Indicating that contents of the
+				  NVDIMM have been scrubbed.
+		* "locked"	: Indicating that NVDIMM contents cant
+				  be modified until next power cycle.
diff --git a/Documentation/arm64/sve.rst b/Documentation/arm64/sve.rst
index 5689c74c8082..bfd55f468258 100644
--- a/Documentation/arm64/sve.rst
+++ b/Documentation/arm64/sve.rst
@@ -186,7 +186,7 @@ prctl(PR_SVE_SET_VL, unsigned long arg)
 
     flags:
 
-	PR_SVE_SET_VL_INHERIT
+	PR_SVE_VL_INHERIT
 
 	    Inherit the current vector length across execve().  Otherwise, the
 	    vector length is reset to the system default at execve().  (See
@@ -247,7 +247,7 @@ prctl(PR_SVE_GET_VL)
 
     The following flag may be OR-ed into the result:
 
-	PR_SVE_SET_VL_INHERIT
+	PR_SVE_VL_INHERIT
 
 	    Vector length will be inherited across execve().
 
@@ -393,7 +393,7 @@ The regset data starts with struct user_sve_header, containing:
 * At every execve() call, the new vector length of the new process is set to
   the system default vector length, unless
 
-    * PR_SVE_SET_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
+    * PR_SVE_VL_INHERIT (or equivalently SVE_PT_VL_INHERIT) is set for the
       calling thread, or
 
     * a deferred vector length change is pending, established via the
diff --git a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
index 9147df29022a..38efb50081e3 100644
--- a/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
+++ b/Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
@@ -34,12 +34,15 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: controller register bus clock
+      - description: baud rate generator and delay control clock
 
   clock-names:
-    description: input clock for the baud rate generator
-    items:
-      - const: core
+    minItems: 1
+    maxItems: 2
 
 if:
   properties:
@@ -51,17 +54,22 @@ if:
 then:
   properties:
     clocks:
-      contains:
-        items:
-          - description: controller register bus clock
-          - description: baud rate generator and delay control clock
+      minItems: 2
 
     clock-names:
-      minItems: 2
       items:
         - const: core
         - const: pclk
 
+else:
+  properties:
+    clocks:
+      maxItems: 1
+
+    clock-names:
+      items:
+        - const: core
+
 required:
   - compatible
   - reg
diff --git a/Documentation/driver-api/media/v4l2-subdev.rst b/Documentation/driver-api/media/v4l2-subdev.rst
index 6e71f67455bb..bc7e1fc40a9d 100644
--- a/Documentation/driver-api/media/v4l2-subdev.rst
+++ b/Documentation/driver-api/media/v4l2-subdev.rst
@@ -451,7 +451,7 @@ The bridge driver also has some helper functions it can use:
 					"module_foo", "chipid", 0x36, NULL);
 
 This loads the given module (can be ``NULL`` if no module needs to be loaded)
-and calls :c:func:`i2c_new_device` with the given ``i2c_adapter`` and
+and calls :c:func:`i2c_new_client_device` with the given ``i2c_adapter`` and
 chip/address arguments. If all goes well, then it registers the subdev with
 the v4l2_device.
 
diff --git a/Documentation/filesystems/dax.txt b/Documentation/filesystems/dax.txt
index 8e2670781c9b..8fdb78f3c6c9 100644
--- a/Documentation/filesystems/dax.txt
+++ b/Documentation/filesystems/dax.txt
@@ -25,7 +25,7 @@ size when creating the filesystem.
 Currently 3 filesystems support DAX: ext2, ext4 and xfs.  Enabling DAX on them
 is different.
 
-Enabling DAX on ext4 and ext2
+Enabling DAX on ext2
 -----------------------------
 
 When mounting the filesystem, use the "-o dax" option on the command line or
@@ -33,8 +33,8 @@ add 'dax' to the options in /etc/fstab.  This works to enable DAX on all files
 within the filesystem.  It is equivalent to the '-o dax=always' behavior below.
 
 
-Enabling DAX on xfs
--------------------
+Enabling DAX on xfs and ext4
+----------------------------
 
 Summary
 -------
diff --git a/Documentation/filesystems/ext4/verity.rst b/Documentation/filesystems/ext4/verity.rst
index 3e4c0ee0e068..e99ff3fd09f7 100644
--- a/Documentation/filesystems/ext4/verity.rst
+++ b/Documentation/filesystems/ext4/verity.rst
@@ -39,3 +39,6 @@ is encrypted as well as the data itself.
 
 Verity files cannot have blocks allocated past the end of the verity
 metadata.
+
+Verity and DAX are not compatible and attempts to set both of these flags
+on a file will fail.
diff --git a/Documentation/gpu/amdgpu.rst b/Documentation/gpu/amdgpu.rst
index 4cc74325bf91..17112352f605 100644
--- a/Documentation/gpu/amdgpu.rst
+++ b/Documentation/gpu/amdgpu.rst
@@ -197,11 +197,14 @@ pp_power_profile_mode
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
    :doc: pp_power_profile_mode
 
-busy_percent
-~~~~~~~~~~~~
+*_busy_percent
+~~~~~~~~~~~~~~
 
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
-   :doc: busy_percent
+   :doc: gpu_busy_percent
+
+.. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
+   :doc: mem_busy_percent
 
 GPU Product Information
 =======================
diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
index c2e29633071e..64689d19dd51 100644
--- a/Documentation/i2c/smbus-protocol.rst
+++ b/Documentation/i2c/smbus-protocol.rst
@@ -57,7 +57,7 @@ SMBus Quick Command
 
 This sends a single bit to the device, at the place of the Rd/Wr bit::
 
-  A Addr Rd/Wr [A] P
+  S Addr Rd/Wr [A] P
 
 Functionality flag: I2C_FUNC_SMBUS_QUICK
 
diff --git a/Documentation/powerpc/papr_hcalls.rst b/Documentation/powerpc/papr_hcalls.rst
index 3493631a60f8..48fcf1255a33 100644
--- a/Documentation/powerpc/papr_hcalls.rst
+++ b/Documentation/powerpc/papr_hcalls.rst
@@ -220,13 +220,51 @@ from the LPAR memory.
 **H_SCM_HEALTH**
 
 | Input: drcIndex
-| Out: *health-bitmap, health-bit-valid-bitmap*
+| Out: *health-bitmap (r4), health-bit-valid-bitmap (r5)*
 | Return Value: *H_Success, H_Parameter, H_Hardware*
 
 Given a DRC Index return the info on predictive failure and overall health of
-the NVDIMM. The asserted bits in the health-bitmap indicate a single predictive
-failure and health-bit-valid-bitmap indicate which bits in health-bitmap are
-valid.
+the PMEM device. The asserted bits in the health-bitmap indicate one or more states
+(described in table below) of the PMEM device and health-bit-valid-bitmap indicate
+which bits in health-bitmap are valid. The bits are reported in
+reverse bit ordering for example a value of 0xC400000000000000
+indicates bits 0, 1, and 5 are valid.
+
+Health Bitmap Flags:
+
++------+-----------------------------------------------------------------------+
+|  Bit |               Definition                                              |
++======+=======================================================================+
+|  00  | PMEM device is unable to persist memory contents.                     |
+|      | If the system is powered down, nothing will be saved.                 |
++------+-----------------------------------------------------------------------+
+|  01  | PMEM device failed to persist memory contents. Either contents were   |
+|      | not saved successfully on power down or were not restored properly on |
+|      | power up.                                                             |
++------+-----------------------------------------------------------------------+
+|  02  | PMEM device contents are persisted from previous IPL. The data from   |
+|      | the last boot were successfully restored.                             |
++------+-----------------------------------------------------------------------+
+|  03  | PMEM device contents are not persisted from previous IPL. There was no|
+|      | data to restore from the last boot.                                   |
++------+-----------------------------------------------------------------------+
+|  04  | PMEM device memory life remaining is critically low                   |
++------+-----------------------------------------------------------------------+
+|  05  | PMEM device will be garded off next IPL due to failure                |
++------+-----------------------------------------------------------------------+
+|  06  | PMEM device contents cannot persist due to current platform health    |
+|      | status. A hardware failure may prevent data from being saved or       |
+|      | restored.                                                             |
++------+-----------------------------------------------------------------------+
+|  07  | PMEM device is unable to persist memory contents in certain conditions|
++------+-----------------------------------------------------------------------+
+|  08  | PMEM device is encrypted                                              |
++------+-----------------------------------------------------------------------+
+|  09  | PMEM device has successfully completed a requested erase or secure    |
+|      | erase procedure.                                                      |
++------+-----------------------------------------------------------------------+
+|10:63 | Reserved / Unused                                                     |
++------+-----------------------------------------------------------------------+
 
 **H_SCM_PERFORMANCE_STATS**
 
diff --git a/Documentation/sh/index.rst b/Documentation/sh/index.rst
index bc8db7ba894a..0bd405acf68f 100644
--- a/Documentation/sh/index.rst
+++ b/Documentation/sh/index.rst
@@ -16,18 +16,6 @@ Store Queue API
 .. kernel-doc:: arch/sh/kernel/cpu/sh4/sq.c
    :export:
 
-SH-5
-----
-
-TLB Interfaces
-~~~~~~~~~~~~~~
-
-.. kernel-doc:: arch/sh/mm/tlb-sh5.c
-   :internal:
-
-.. kernel-doc:: arch/sh/include/asm/tlb_64.h
-   :internal:
-
 Machine Specific Interfaces
 ===========================
 
diff --git a/Documentation/userspace-api/media/conf_nitpick.py b/Documentation/userspace-api/media/conf_nitpick.py
index d0c50d75f518..0a8e236d07ab 100644
--- a/Documentation/userspace-api/media/conf_nitpick.py
+++ b/Documentation/userspace-api/media/conf_nitpick.py
@@ -27,7 +27,7 @@ nitpick_ignore = [
     ("c:func", "copy_to_user"),
     ("c:func", "determine_valid_ioctls"),
     ("c:func", "ERR_PTR"),
-    ("c:func", "i2c_new_device"),
+    ("c:func", "i2c_new_client_device"),
     ("c:func", "ioctl"),
     ("c:func", "IS_ERR"),
     ("c:func", "KERNEL_VERSION"),