Merge tag 'v5.0-rc6' into for-5.1/block

Pull in 5.0-rc6 to avoid a dumb merge conflict with fs/iomap.c.
This is needed since io_uring is now based on the block branch,
to avoid a conflict between the multi-page bvecs and the bits
of io_uring that touch the core block parts.

* tag 'v5.0-rc6': (525 commits)
  Linux 5.0-rc6
  x86/mm: Make set_pmd_at() paravirt aware
  MAINTAINERS: Update the ocores i2c bus driver maintainer, etc
  blk-mq: remove duplicated definition of blk_mq_freeze_queue
  Blk-iolatency: warn on negative inflight IO counter
  blk-iolatency: fix IO hang due to negative inflight counter
  MAINTAINERS: unify reference to xen-devel list
  x86/mm/cpa: Fix set_mce_nospec()
  futex: Handle early deadlock return correctly
  futex: Fix barrier comment
  net: dsa: b53: Fix for failure when irq is not defined in dt
  blktrace: Show requests without sector
  mips: cm: reprime error cause
  mips: loongson64: remove unreachable(), fix loongson_poweroff().
  sit: check if IPv6 enabled before calling ip6_err_gen_icmpv6_unreach()
  geneve: should not call rt6_lookup() when ipv6 was disabled
  KVM: nVMX: unconditionally cancel preemption timer in free_nested (CVE-2019-7221)
  KVM: x86: work around leak of uninitialized stack contents (CVE-2019-7222)
  kvm: fix kvm_ioctl_create_device() reference counting (CVE-2019-6974)
  signal: Better detection of synchronous signals
  ...

6 files changed, 28 insertions, 23 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
index 9b642669cb16..169fe08a649b 100644
--- a/Documentation/ABI/stable/sysfs-driver-mlxreg-io
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -24,7 +24,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
 							cpld3_version
 
 Date:		November 2018
-KernelVersion:	4.21
+KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show with which CPLD versions have been burned
 		on LED board.
@@ -35,7 +35,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
 							jtag_enable
 
 Date:		November 2018
-KernelVersion:	4.21
+KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files enable and disable the access to the JTAG domain.
 		By default access to the JTAG domain is disabled.
@@ -105,7 +105,7 @@ What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/
 						reset_voltmon_upgrade_fail
 
 Date:		November 2018
-KernelVersion:	4.21
+KernelVersion:	5.0
 Contact:	Vadim Pasternak <vadimpmellanox.com>
 Description:	These files show the system reset cause, as following: ComEx
 		power fail, reset from ComEx, system platform reset, reset
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index b799bcf67d7b..858b6c0b9a15 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1696,12 +1696,11 @@
 			By default, super page will be supported if Intel IOMMU
 			has the capability. With this option, super page will
 			not be supported.
-		sm_off [Default Off]
-			By default, scalable mode will be supported if the
+		sm_on [Default Off]
+			By default, scalable mode will be disabled even if the
 			hardware advertises that it has support for the scalable
 			mode translation. With this option set, scalable mode
-			will not be used even on hardware which claims to support
-			it.
+			will be used on hardware which claims to support it.
 		tboot_noforce [Default Off]
 			Do not force the Intel IOMMU enabled under tboot.
 			By default, tboot will force Intel IOMMU on, which
diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile
index 6e5cef0ed6fb..50daa0b3b032 100644
--- a/Documentation/devicetree/bindings/Makefile
+++ b/Documentation/devicetree/bindings/Makefile
@@ -17,7 +17,11 @@ extra-y += $(DT_TMP_SCHEMA)
 quiet_cmd_mk_schema = SCHEMA  $@
       cmd_mk_schema = $(DT_MK_SCHEMA) $(DT_MK_SCHEMA_FLAGS) -o $@ $(filter-out FORCE, $^)
 
-DT_DOCS = $(shell cd $(srctree)/$(src) && find * -name '*.yaml')
+DT_DOCS = $(shell \
+	cd $(srctree)/$(src) && \
+	find * \( -name '*.yaml' ! -name $(DT_TMP_SCHEMA) \) \
+	)
+
 DT_SCHEMA_FILES ?= $(addprefix $(src)/,$(DT_DOCS))
 
 extra-y += $(patsubst $(src)/%.yaml,%.example.dts, $(DT_SCHEMA_FILES))
diff --git a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
index 36603419d6f8..0e72183f52bc 100644
--- a/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
+++ b/Documentation/devicetree/bindings/serio/olpc,ap-sp.txt
@@ -4,14 +4,10 @@ Required properties:
 - compatible : "olpc,ap-sp"
 - reg : base address and length of SoC's WTM registers
 - interrupts : SP-AP interrupt
-- clocks : phandle + clock-specifier for the clock that drives the WTM
-- clock-names:  should be "sp"
 
 Example:
 	ap-sp@d4290000 {
 		compatible = "olpc,ap-sp";
 		reg = <0xd4290000 0x1000>;
 		interrupts = <40>;
-		clocks = <&soc_clocks MMP2_CLK_SP>;
-		clock-names = "sp";
 	}
diff --git a/Documentation/sysctl/fs.txt b/Documentation/sysctl/fs.txt
index 819caf8ca05f..58649bd4fcfc 100644
--- a/Documentation/sysctl/fs.txt
+++ b/Documentation/sysctl/fs.txt
@@ -56,26 +56,32 @@ of any kernel data structures.
 
 dentry-state:
 
-From linux/fs/dentry.c:
+From linux/include/linux/dcache.h:
 --------------------------------------------------------------
-struct {
+struct dentry_stat_t dentry_stat {
         int nr_dentry;
         int nr_unused;
         int age_limit;         /* age in seconds */
         int want_pages;        /* pages requested by system */
-        int dummy[2];
-} dentry_stat = {0, 0, 45, 0,};
--------------------------------------------------------------- 
-
-Dentries are dynamically allocated and deallocated, and
-nr_dentry seems to be 0 all the time. Hence it's safe to
-assume that only nr_unused, age_limit and want_pages are
-used. Nr_unused seems to be exactly what its name says.
+        int nr_negative;       /* # of unused negative dentries */
+        int dummy;             /* Reserved for future use */
+};
+--------------------------------------------------------------
+
+Dentries are dynamically allocated and deallocated.
+
+nr_dentry shows the total number of dentries allocated (active
++ unused). nr_unused shows the number of dentries that are not
+actively used, but are saved in the LRU list for future reuse.
+
 Age_limit is the age in seconds after which dcache entries
 can be reclaimed when memory is short and want_pages is
 nonzero when shrink_dcache_pages() has been called and the
 dcache isn't pruned yet.
 
+nr_negative shows the number of unused dentries that are also
+negative dentries which do not mapped to actual files.
+
 ==============================================================
 
 dquot-max & dquot-nr:
diff --git a/Documentation/x86/resctrl_ui.txt b/Documentation/x86/resctrl_ui.txt
index e8e8d14d3c4e..c1f95b59e14d 100644
--- a/Documentation/x86/resctrl_ui.txt
+++ b/Documentation/x86/resctrl_ui.txt
@@ -9,7 +9,7 @@ Fenghua Yu <fenghua.yu@intel.com>
 Tony Luck <tony.luck@intel.com>
 Vikas Shivappa <vikas.shivappa@intel.com>
 
-This feature is enabled by the CONFIG_X86_RESCTRL and the x86 /proc/cpuinfo
+This feature is enabled by the CONFIG_X86_CPU_RESCTRL and the x86 /proc/cpuinfo
 flag bits:
 RDT (Resource Director Technology) Allocation - "rdt_a"
 CAT (Cache Allocation Technology) - "cat_l3", "cat_l2"